Add pins_RURAMPS4D.h & change pins.h
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
This commit is contained in:
Scott Lahteine
parent
00514857e9
commit
006dad4b52
|
|
@ -174,6 +174,7 @@
|
|||
#define BOARD_RAMPS4DUE_EFF 1545 // RAMPS4DUE (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS4DUE_EEF 1546 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS4DUE_SF 1548 // RAMPS4DUE (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RURAMPS4D 1550 // RuRAMPS4Duo v1 (Power outputs: Hotend0, Hotend2, Hotend2, Fan0, Fan1, Bed)
|
||||
#define BOARD_ARCHIM2 1590 // UltiMachine Archim2 (with TMC2130 drivers)
|
||||
#define BOARD_ALLIGATOR 1602 // Alligator Board R2
|
||||
|
||||
|
|
|
|||
|
|
@ -268,6 +268,8 @@
|
|||
#include "pins_DUE3DOM_MINI.h"
|
||||
#elif MB(RADDS)
|
||||
#include "pins_RADDS.h"
|
||||
#elif MB(RURAMPS4D)
|
||||
#include "pins_RURAMPS4D.h"
|
||||
#elif MB(RAMPS_FD_V1)
|
||||
#include "pins_RAMPS_FD_V1.h"
|
||||
#elif MB(RAMPS_FD_V2)
|
||||
|
|
|
|||
224
Marlin/src/pins/pins_RURAMPS4D.h
Normal file
224
Marlin/src/pins/pins_RURAMPS4D.h
Normal file
|
|
@ -0,0 +1,224 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
* Ported sys0724 & Vynt
|
||||
*/
|
||||
|
||||
/**
|
||||
* Arduino Mega? or Due with RuRAMPS4DUE pin assignments
|
||||
*
|
||||
* Applies to the following boards:
|
||||
* RURAMPS4DUE (Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
|
||||
*
|
||||
* Differences between
|
||||
* RADDS | RuRAMPS4DUE
|
||||
* A13 | A9/D63 (shares the same pin with AUX2_4PIN)
|
||||
* A14 | A10/D64 (shares the same pin with AUX2_5PIN)
|
||||
* A15 | NC
|
||||
*/
|
||||
|
||||
#ifndef __SAM3X8E__
|
||||
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "RuRAMPS4Due"
|
||||
#endif
|
||||
|
||||
#undef INVERTED_HEATER_PINS
|
||||
#undef INVERTED_BED_PINS
|
||||
#undef INVERTED_FAN_PINS
|
||||
|
||||
#define I2C_EEPROM
|
||||
//#define SPI_EEPROM
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 5
|
||||
#define SERVO1_PIN 3
|
||||
#define SERVO2_PIN -1
|
||||
#define SERVO3_PIN 1
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN 45
|
||||
#define X_MAX_PIN 39
|
||||
#define Y_MIN_PIN 46
|
||||
#define Y_MAX_PIN 41
|
||||
#define Z_MIN_PIN 49
|
||||
#define Z_MAX_PIN 43
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN 43
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 37
|
||||
#define X_DIR_PIN 36
|
||||
#define X_ENABLE_PIN 38
|
||||
#define X_CS_PIN -1
|
||||
|
||||
#define Y_STEP_PIN 32
|
||||
#define Y_DIR_PIN 35
|
||||
#define Y_ENABLE_PIN 34
|
||||
#define Y_CS_PIN -1
|
||||
|
||||
#define Z_STEP_PIN 30
|
||||
#define Z_DIR_PIN 2
|
||||
#define Z_ENABLE_PIN 33
|
||||
#define Z_CS_PIN -1
|
||||
|
||||
#define E0_STEP_PIN 29
|
||||
#define E0_DIR_PIN 28
|
||||
#define E0_ENABLE_PIN 31
|
||||
#define E0_CS_PIN -1
|
||||
|
||||
#define E1_STEP_PIN 22
|
||||
#define E1_DIR_PIN 24
|
||||
#define E1_ENABLE_PIN 26
|
||||
#define E1_CS_PIN -1
|
||||
|
||||
#define E2_STEP_PIN 25 //14 //sys0724
|
||||
#define E2_DIR_PIN 23 //15
|
||||
#define E2_ENABLE_PIN 27 //61
|
||||
#define E2_CS_PIN -1
|
||||
|
||||
// For Extension Board V2
|
||||
// http://doku.radds.org/dokumentation/extension-board
|
||||
//#define E3_STEP_PIN 35
|
||||
//#define E3_DIR_PIN 33
|
||||
//#define E3_ENABLE_PIN 37
|
||||
//#define E3_CS_PIN 6
|
||||
|
||||
//#define Z2_STEP_PIN 29
|
||||
//#define Z2_DIR_PIN 27
|
||||
//#define Z2_ENABLE_PIN 31
|
||||
//#define Z2_CS_PIN 39
|
||||
|
||||
// Microstepping pins - Mapping not from fastio.h (?)
|
||||
//#define E3_MS1_PIN 67
|
||||
//#define E3_MS2_PIN 68
|
||||
//#define E3_MS3_PIN 69
|
||||
//#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN
|
||||
//#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN
|
||||
//#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 0 // ANALOG NUMBERING #54
|
||||
#define TEMP_1_PIN 1 // ANALOG NUMBERING #55
|
||||
#define TEMP_2_PIN 2 // ANALOG NUMBERING #56
|
||||
#define TEMP_3_PIN 3 // ANALOG NUMBERING #57
|
||||
#define TEMP_BED_PIN 4 // ANALOG NUMBERING #58
|
||||
|
||||
/*
|
||||
// SPI for Max6675 or Max31855 Thermocouple
|
||||
#if DISABLED(SDSUPPORT)
|
||||
#define MAX6675_SS 53
|
||||
#else
|
||||
#define MAX6675_SS 49
|
||||
#endif
|
||||
*/
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 13
|
||||
#define HEATER_1_PIN 12
|
||||
#define HEATER_2_PIN 11
|
||||
#define HEATER_BED_PIN 7 // BED H1
|
||||
|
||||
#define FAN_PIN 9
|
||||
#define FAN1_PIN 8
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS 4 // 4,10,52 if using HW SPI.
|
||||
#define LED_PIN 13
|
||||
|
||||
//#define FIL_RUNOUT_PIN Y_MIN_PIN
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
// RADDS LCD panel
|
||||
#if ENABLED(RADDS_DISPLAY) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||
#define LCD_PINS_RS 63
|
||||
#define LCD_PINS_ENABLE 64
|
||||
#define LCD_PINS_D4 48
|
||||
#define LCD_PINS_D5 50
|
||||
#define LCD_PINS_D6 52
|
||||
#define LCD_PINS_D7 53
|
||||
|
||||
#define BEEPER_PIN 62
|
||||
|
||||
#define BTN_EN1 44
|
||||
#define BTN_EN2 42
|
||||
#define BTN_ENC 40
|
||||
|
||||
#define SD_DETECT_PIN 51
|
||||
|
||||
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define LCD_PINS_RS 52 //?
|
||||
#define LCD_PINS_ENABLE 53 //?
|
||||
#define LCD_PINS_D4 48 //?
|
||||
#define LCD_PINS_D5 50 //?
|
||||
#define LCD_PINS_D6 52 //?
|
||||
#define LCD_PINS_D7 53 //?
|
||||
|
||||
#define BEEPER_PIN 62
|
||||
|
||||
#define BTN_EN1 44 //!
|
||||
#define BTN_EN2 42 //!
|
||||
#define BTN_ENC 40
|
||||
#define SD_DETECT_PIN 51
|
||||
|
||||
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
|
||||
|
||||
#define BTN_EN1 44 //?
|
||||
#define BTN_EN2 42 //?
|
||||
#define BTN_ENC 40 //?
|
||||
#define SD_DETECT_PIN 51 //?
|
||||
|
||||
#define BEEPER_PIN 62 //?
|
||||
#define LCD_SDSS 10 //?
|
||||
|
||||
#elif ENABLED(SPARK_FULL_GRAPHICS) //!!! - check!
|
||||
|
||||
#define LCD_PINS_D4 29
|
||||
#define LCD_PINS_ENABLE 27
|
||||
#define LCD_PINS_RS 25
|
||||
#define BTN_EN1 35
|
||||
#define BTN_EN2 33
|
||||
#define BTN_ENC 37
|
||||
|
||||
#endif // SPARK_FULL_GRAPHICS
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
Loading…
Reference in a new issue