0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)

Browse source
This commit is contained in:
InsanityAutomation 2019-01-12 01:41:48 -05:00 committed by Scott Lahteine
parent 459f4fef60
commit 082f6a27de
88 changed files with 405 additions and 161 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

15
Marlin/src/Marlin.cpp
View file

@ -164,17 +164,6 @@ bool Running = true;
TempUnit input_temp_units = TEMPUNIT_C;
#endif
#if FAN_COUNT > 0
uint8_t fan_speed[FAN_COUNT] = { 0 };
#if ENABLED(EXTRA_FAN_SPEED)
uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT];
#endif
#if ENABLED(PROBING_FANS_OFF)
bool fans_paused; // = false;
uint8_t paused_fan_speed[FAN_COUNT] = { 0 };
#endif
#endif
// For M109 and M190, this flag may be cleared (by M108) to exit the wait loop
volatile bool wait_for_heatup = true;
@ -655,7 +644,7 @@ void stop() {
print_job_timer.stop();
#if ENABLED(PROBING_FANS_OFF)
if (fans_paused) fans_pause(false); // put things back the way they were
if (thermalManager.fans_paused) thermalManager.set_fans_paused(false); // put things back the way they were
#endif
if (IsRunning()) {
@ -976,7 +965,7 @@ void loop() {
quickstop_stepper();
print_job_timer.stop();
thermalManager.disable_all_heaters();
zero_fan_speeds();
thermalManager.zero_fan_speeds();
wait_for_heatup = false;
#if ENABLED(POWER_LOSS_RECOVERY)
card.removeJobRecoveryFile();

18
Marlin/src/Marlin.h
View file

@ -81,24 +81,6 @@ extern volatile bool wait_for_heatup;
// Inactivity shutdown timer
extern millis_t max_inactive_time, stepper_inactive_time;
#if FAN_COUNT > 0
extern uint8_t fan_speed[FAN_COUNT];
#if ENABLED(EXTRA_FAN_SPEED)
extern uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT];
#endif
#if ENABLED(PROBING_FANS_OFF)
extern bool fans_paused;
extern uint8_t paused_fan_speed[FAN_COUNT];
#endif
#define FANS_LOOP(I) LOOP_L_N(I, FAN_COUNT)
#endif
inline void zero_fan_speeds() {
#if FAN_COUNT > 0
FANS_LOOP(i) fan_speed[i] = 0;
#endif
}
#if ENABLED(USE_CONTROLLER_FAN)
extern uint8_t controllerfan_speed;
#endif

2
Marlin/src/config/default/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/ArmEd/Configuration_adv.h
View file

@ -81,6 +81,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 45 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Felix/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 210 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Mks/Robin/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 50 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/SCARA/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 50 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/VORONDesign/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -87,6 +87,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 50 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 50 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 3 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/makibox/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/config/examples/wt150/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature

2
Marlin/src/feature/power.cpp
View file

@ -39,7 +39,7 @@ millis_t Power::lastPowerOn;
bool Power::is_power_needed() {
#if ENABLED(AUTO_POWER_FANS)
FANS_LOOP(i) if (fan_speed[i]) return true;
FANS_LOOP(i) if (thermalManager.fan_speed[i]) return true;
#endif
#if ENABLED(AUTO_POWER_E_FANS)

2
Marlin/src/feature/power_loss_recovery.cpp
View file

@ -162,7 +162,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*=
#endif
#if FAN_COUNT
COPY(info.fan_speed, fan_speed);
COPY(info.fan_speed, thermalManager.fan_speed);
#endif
#if HAS_LEVELING

10
Marlin/src/gcode/control/M42.cpp
View file

@ -24,6 +24,10 @@
#include "../../Marlin.h" // for pin_is_protected
#include "../../inc/MarlinConfig.h"
#if FAN_COUNT > 0
#include "../../module/temperature.h"
#endif
/**
* M42: Change pin status via GCode
*
@ -52,13 +56,13 @@ void GcodeSuite::M42() {
#if FAN_COUNT > 0
switch (pin) {
#if HAS_FAN0
case FAN_PIN: fan_speed[0] = pin_status; break;
case FAN_PIN: thermalManager.fan_speed[0] = pin_status; break;
#endif
#if HAS_FAN1
case FAN1_PIN: fan_speed[1] = pin_status; break;
case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; break;
#endif
#if HAS_FAN2
case FAN2_PIN: fan_speed[2] = pin_status; break;
case FAN2_PIN: thermalManager.fan_speed[2] = pin_status; break;
#endif
}
#endif

6
Marlin/src/gcode/control/M80_M81.cpp
View file

@ -100,10 +100,10 @@ void GcodeSuite::M81() {
planner.finish_and_disable();
#if FAN_COUNT > 0
zero_fan_speeds();
thermalManager.zero_fan_speeds();
#if ENABLED(PROBING_FANS_OFF)
fans_paused = false;
ZERO(paused_fan_speed);
thermalManager.fans_paused = false;
ZERO(thermalManager.paused_fan_speed);
#endif
#endif

52
Marlin/src/gcode/temperature/M106_M107.cpp
View file

@ -25,13 +25,9 @@
#if FAN_COUNT > 0
#include "../gcode.h"
#include "../../Marlin.h" // for fan_speed
#include "../../module/motion.h"
#include "../../module/temperature.h"
#if ENABLED(SINGLENOZZLE)
#include "../../module/tool_change.h"
#endif
/**
* M106: Set Fan Speed
@ -50,39 +46,16 @@ void GcodeSuite::M106() {
const uint8_t p = parser.byteval('P', MIN(active_extruder, FAN_COUNT - 1));
if (p < MIN(EXTRUDERS, FAN_COUNT)) {
uint16_t s = parser.ushortval('S', 255);
NOMORE(s, 255U);
uint8_t np = p;
#if ENABLED(SINGLENOZZLE)
if (p != active_extruder) {
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = s;
return;
}
np = 0; // Always use fan index 0 with SINGLENOZZLE
#endif
#if ENABLED(EXTRA_FAN_SPEED)
const int16_t t = parser.intval('T');
if (t > 0) {
switch (t) {
case 1:
fan_speed[np] = old_fan_speed[np];
break;
case 2:
old_fan_speed[np] = fan_speed[np];
fan_speed[np] = new_fan_speed[np];
break;
default:
new_fan_speed[np] = MIN(t, 255U);
break;
}
return;
}
#endif // EXTRA_FAN_SPEED
if (t > 0) return thermalManager.set_temp_fan_speed(p, t);
#endif
fan_speed[np] = s;
uint16_t s = parser.ushortval('S', 255);
NOMORE(s, 255U);
thermalManager.set_fan_speed(p, s);
}
}
@ -90,16 +63,7 @@ void GcodeSuite::M106() {
* M107: Fan Off
*/
void GcodeSuite::M107() {
const uint16_t p = parser.byteval('P', active_extruder);
#if ENABLED(SINGLENOZZLE)
if (p != active_extruder) {
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = 0;
return;
}
#endif
if (p < MIN(EXTRUDERS, FAN_COUNT)) fan_speed[p] = 0;
thermalManager.set_fan_speed(parser.byteval('P', active_extruder), 0);
}
#endif // FAN_COUNT > 0

18
Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp
View file

@ -866,11 +866,15 @@ void MarlinUI::draw_status_screen() {
_draw_print_progress();
#else
char c;
int per;
uint16_t per;
#if HAS_FAN0
if (blink) {
c = 'F';
per = ((int(fan_speed[0]) + 1) * 100) / 256;
if (blink || thermalManager.fan_speed_scaler[0] < 128) {
uint16_t spd = thermalManager.fan_speed[0];
if (blink) c = 'F';
#if ENABLED(ADAPTIVE_FAN_SLOWING)
else { c = '*'; spd = (spd * thermalManager.fan_speed_scaler[0]) >> 7; }
#endif
per = thermalManager.fanPercent(spd);
}
else
#endif
@ -1049,13 +1053,13 @@ void MarlinUI::draw_status_screen() {
#if FAN_COUNT > 0
if (0
#if HAS_FAN0
|| fan_speed[0]
|| thermalManager.fan_speed[0]
#endif
#if HAS_FAN1
|| fan_speed[1]
|| thermalManager.fan_speed[1]
#endif
#if HAS_FAN2
|| fan_speed[2]
|| thermalManager.fan_speed[2]
#endif
) leds |= LED_C;
#endif // FAN_COUNT > 0

19
Marlin/src/lcd/dogm/status_screen_DOGM.cpp
View file

@ -291,7 +291,7 @@ void MarlinUI::draw_status_screen() {
static uint8_t fan_frame;
if (old_blink != blink) {
old_blink = blink;
if (!fan_speed[0] || ++fan_frame >= STATUS_FAN_FRAMES) fan_frame = 0;
if (!thermalManager.fan_speed[0] || ++fan_frame >= STATUS_FAN_FRAMES) fan_frame = 0;
}
#endif
if (PAGE_CONTAINS(STATUS_FAN_Y, STATUS_FAN_Y + STATUS_FAN_HEIGHT - 1))
@ -305,7 +305,7 @@ void MarlinUI::draw_status_screen() {
fan_frame == 3 ? status_fan3_bmp :
#endif
#elif STATUS_FAN_FRAMES > 1
blink && fan_speed[0] ? status_fan1_bmp :
blink && thermalManager.fan_speed[0] ? status_fan1_bmp :
#endif
status_fan0_bmp
);
@ -328,11 +328,18 @@ void MarlinUI::draw_status_screen() {
// Fan, if a bitmap was provided
#if DO_DRAW_FAN
if (PAGE_CONTAINS(STATUS_FAN_TEXT_Y - INFO_FONT_ASCENT, STATUS_FAN_TEXT_Y - 1)) {
const int per = ((int(fan_speed[0]) + 1) * 100) / 256;
if (per) {
char c = '%';
uint16_t spd = thermalManager.fan_speed[0];
if (spd) {
#if ENABLED(ADAPTIVE_FAN_SLOWING)
if (!blink && thermalManager.fan_speed_scaler[0] < 128) {
spd = (spd * thermalManager.fan_speed_scaler[0]) >> 7;
c = '*';
}
#endif
lcd_moveto(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y);
lcd_put_u8str(itostr3(per));
lcd_put_wchar('%');
lcd_put_u8str(itostr3(thermalManager.fanPercent(spd)));
lcd_put_wchar(c);
}
}
#endif

15
Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
View file

@ -707,7 +707,7 @@ bool ST7920_Lite_Status_Screen::indicators_changed() {
// them only during blinks we gain a bit of stability.
const bool blink = ui.get_blink();
const uint16_t feedrate_perc = feedrate_percentage;
const uint8_t fs = (((uint16_t)fan_speed[0] + 1) * 100) / 256;
const uint16_t fs = (thermalManager.fan_speed[0] * uint16_t(thermalManager.fan_speed_scaler[0])) >> 7;
const int16_t extruder_1_target = thermalManager.degTargetHotend(0);
#if HOTENDS > 1
const int16_t extruder_2_target = thermalManager.degTargetHotend(1);
@ -734,7 +734,6 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
const bool blink = ui.get_blink();
const duration_t elapsed = print_job_timer.duration();
const uint16_t feedrate_perc = feedrate_percentage;
const uint8_t fs = (((uint16_t)fan_speed[0] + 1) * 100) / 256;
const int16_t extruder_1_temp = thermalManager.degHotend(0),
extruder_1_target = thermalManager.degTargetHotend(0);
#if HOTENDS > 1
@ -753,12 +752,20 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
#if HAS_HEATED_BED
draw_bed_temp(bed_temp, bed_target, forceUpdate);
#endif
draw_fan_speed(fs);
uint16_t spd = thermalManager.fan_speed[0];
#if ENABLED(ADAPTIVE_FAN_SLOWING)
if (!blink && thermalManager.fan_speed_scaler[0] < 128)
spd = (spd * thermalManager.fan_speed_scaler[0]) >> 7;
#endif
draw_fan_speed(thermalManager.fanPercent(spd));
draw_print_time(elapsed);
draw_feedrate_percentage(feedrate_perc);
// Update the fan and bed animations
if (fs) draw_fan_icon(blink);
if (spd) draw_fan_icon(blink);
#if HAS_HEATED_BED
draw_heat_icon(bed_target > 0 && blink, bed_target > 0);
#endif

12
Marlin/src/lcd/extensible_ui/ui_api.cpp
View file

@ -180,7 +180,13 @@ namespace ExtUI {
return thermalManager.degTargetHotend(extruder - E0);
}
float getFan_percent(const fan_t fan) { return ((float(fan_speed[fan - FAN0]) + 1) * 100) / 256; }
float getTargetFan_percent(const fan_t fan) {
return thermalManager.fanPercent(thermalManager.fan_speed[fan - FAN0]);
}
float getActualFan_percent(const fan_t fan) {
return thermalManager.fanPercent((thermalManager.fan_speed[fan - FAN0] * uint16_t(thermalManager.fan_speed_scaler[fan - FAN0])) >> 7);
}
float getAxisPosition_mm(const axis_t axis) {
return flags.manual_motion ? destination[axis] : current_position[axis];
@ -560,9 +566,9 @@ namespace ExtUI {
thermalManager.setTargetHotend(clamp(value, 0, heater_maxtemp[e] - 15), e);
}
void setFan_percent(float value, const fan_t fan) {
void setTargetFan_percent(const float value, const fan_t fan) {
if (fan < FAN_COUNT)
fan_speed[fan - FAN0] = clamp(round(value * 255 / 100), 0, 255);
thermalManager.set_fan_speed(fan - FAN0, map(value, 0, 100, 0, 255));
}
void setFeedrate_percent(const float value) {

5
Marlin/src/lcd/extensible_ui/ui_api.h
View file

@ -72,7 +72,8 @@ namespace ExtUI {
float getActualTemp_celsius(const extruder_t);
float getTargetTemp_celsius(const heater_t);
float getTargetTemp_celsius(const extruder_t);
float getFan_percent(const fan_t);
float getTargetFan_percent(const fan_t);
float getActualFan_percent(const fan_t);
float getAxisPosition_mm(const axis_t);
float getAxisPosition_mm(const extruder_t);
float getAxisSteps_per_mm(const axis_t);
@ -100,7 +101,7 @@ namespace ExtUI {
void setTargetTemp_celsius(const float, const heater_t);
void setTargetTemp_celsius(const float, const extruder_t);
void setFan_percent(const float, const fan_t);
void setTargetFan_percent(const float, const fan_t);
void setAxisPosition_mm(const float, const axis_t);
void setAxisPosition_mm(const float, const extruder_t);
void setAxisSteps_per_mm(const float, const axis_t);

2
Marlin/src/lcd/malyanlcd.cpp
View file

@ -255,7 +255,7 @@ void process_lcd_p_command(const char* command) {
quickstop_stepper();
print_job_timer.stop();
thermalManager.disable_all_heaters();
zero_fan_speeds();
thermalManager.zero_fan_speeds();
wait_for_heatup = false;
write_to_lcd_P(PSTR("{SYS:STARTED}"));
#endif

2
Marlin/src/lcd/menu/menu_main.cpp
View file

@ -54,7 +54,7 @@ void lcd_pause() {
void lcd_resume() {
#if ENABLED(SDSUPPORT)
if (card.isPaused()) enqueue_and_echo_commands_P(PSTR("M24"));
#elif ENABLED(ACTION_ON_RESUME)
#elif defined(ACTION_ON_RESUME)
SERIAL_ECHOLNPGM("//action:" ACTION_ON_RESUME);
#endif
}

22
Marlin/src/lcd/menu/menu_temperature.cpp
View file

@ -52,9 +52,9 @@ void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb
#endif
#if FAN_COUNT > 0
#if FAN_COUNT > 1
fan_speed[active_extruder < FAN_COUNT ? active_extruder : 0] = fan;
thermalManager.set_fan_speed(active_extruder < FAN_COUNT ? active_extruder : 0, fan);
#else
fan_speed[0] = fan;
thermalManager.set_fan_speed(0, fan);
#endif
#else
UNUSED(fan);
@ -292,7 +292,7 @@ void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb
}
void lcd_cooldown() {
zero_fan_speeds();
thermalManager.zero_fan_speeds();
thermalManager.disable_all_heaters();
ui.return_to_status();
}
@ -339,21 +339,21 @@ void menu_temperature() {
//
#if FAN_COUNT > 0
#if HAS_FAN0
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fan_speed[0], 0, 255);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0);
#if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fan_speed[0], 3, 255);
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255);
#endif
#endif
#if HAS_FAN1
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 2", &fan_speed[1], 0, 255);
#if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1)
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1);
#if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &new_fan_speed[1], 3, 255);
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255);
#endif
#endif
#if HAS_FAN2
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 3", &fan_speed[2], 0, 255);
#if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2)
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2);
#if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &new_fan_speed[2], 3, 255);
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255);
#endif
#endif
#endif // FAN_COUNT > 0

16
Marlin/src/lcd/menu/menu_tune.cpp
View file

@ -141,21 +141,21 @@ void menu_tune() {
//
#if FAN_COUNT > 0
#if HAS_FAN0
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fan_speed[0], 0, 255);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0);
#if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fan_speed[0], 3, 255);
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255);
#endif
#endif
#if HAS_FAN1
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 2", &fan_speed[1], 0, 255);
#if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1)
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1);
#if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &new_fan_speed[1], 3, 255);
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255);
#endif
#endif
#if HAS_FAN2
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 3", &fan_speed[2], 0, 255);
#if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2)
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2);
#if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &new_fan_speed[2], 3, 255);
MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255);
#endif
#endif
#endif // FAN_COUNT > 0

8
Marlin/src/module/planner.cpp
View file

@ -1178,10 +1178,9 @@ void Planner::check_axes_activity() {
#endif
if (has_blocks_queued()) {
#if FAN_COUNT > 0
FANS_LOOP(i)
tail_fan_speed[i] = block_buffer[block_buffer_tail].fan_speed[i];
tail_fan_speed[i] = (block_buffer[block_buffer_tail].fan_speed[i] * uint16_t(thermalManager.fan_speed_scaler[i])) >> 7;
#endif
block_t* block;
@ -1203,7 +1202,8 @@ void Planner::check_axes_activity() {
}
else {
#if FAN_COUNT > 0
FANS_LOOP(i) tail_fan_speed[i] = fan_speed[i];
FANS_LOOP(i)
tail_fan_speed[i] = (thermalManager.fan_speed[i] * uint16_t(thermalManager.fan_speed_scaler[i])) >> 7;
#endif
#if ENABLED(BARICUDA)
@ -1903,7 +1903,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#endif
#if FAN_COUNT > 0
FANS_LOOP(i) block->fan_speed[i] = fan_speed[i];
FANS_LOOP(i) block->fan_speed[i] = thermalManager.fan_speed[i];
#endif
#if ENABLED(BARICUDA)

20
Marlin/src/module/probe.cpp
View file

@ -268,31 +268,13 @@ float zprobe_zoffset; // Initialized by settings.load()
#endif // Z_PROBE_ALLEN_KEY
#if ENABLED(PROBING_FANS_OFF)
void fans_pause(const bool p) {
if (p != fans_paused) {
fans_paused = p;
if (p)
for (uint8_t x = 0; x < FAN_COUNT; x++) {
paused_fan_speed[x] = fan_speed[x];
fan_speed[x] = 0;
}
else
for (uint8_t x = 0; x < FAN_COUNT; x++)
fan_speed[x] = paused_fan_speed[x];
}
}
#endif // PROBING_FANS_OFF
#if QUIET_PROBING
void probing_pause(const bool p) {
#if ENABLED(PROBING_HEATERS_OFF)
thermalManager.pause(p);
#endif
#if ENABLED(PROBING_FANS_OFF)
fans_pause(p);
thermalManager.set_fans_paused(p);
#endif
#if ENABLED(PROBING_STEPPERS_OFF)
disable_e_steppers();

4
Marlin/src/module/probe.h
View file

@ -58,10 +58,6 @@
void probing_pause(const bool p);
#endif
#if ENABLED(PROBING_FANS_OFF)
void fans_pause(const bool p);
#endif
#if ENABLED(BLTOUCH)
void bltouch_command(int angle);
bool set_bltouch_deployed(const bool deploy);

117
Marlin/src/module/temperature.cpp
View file

@ -55,6 +55,10 @@
#include "../feature/leds/printer_event_leds.h"
#endif
#if ENABLED(SINGLENOZZLE)
#include "tool_change.h"
#endif
#if HOTEND_USES_THERMISTOR
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
static void* heater_ttbl_map[2] = { (void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE };
@ -92,14 +96,99 @@ Temperature thermalManager;
// public:
float Temperature::current_temperature[HOTENDS] = { 0.0 };
int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 },
Temperature::target_temperature[HOTENDS] = { 0 };
float Temperature::current_temperature[HOTENDS]; // = { 0.0 };
int16_t Temperature::current_temperature_raw[HOTENDS], // = { 0 }
Temperature::target_temperature[HOTENDS]; // = { 0 }
#if ENABLED(AUTO_POWER_E_FANS)
uint8_t Temperature::autofan_speed[HOTENDS] = { 0 };
uint8_t Temperature::autofan_speed[HOTENDS]; // = { 0 }
#endif
#if FAN_COUNT > 0
uint8_t Temperature::fan_speed[FAN_COUNT]; // = { 0 }
#if ENABLED(EXTRA_FAN_SPEED)
uint8_t Temperature::old_fan_speed[FAN_COUNT], Temperature::new_fan_speed[FAN_COUNT];
void Temperature::set_temp_fan_speed(const uint8_t fan, const int16_t tmp_temp) {
switch (tmp_temp) {
case 1:
set_fan_speed(fan, old_fan_speed[fan]);
break;
case 2:
old_fan_speed[fan] = fan_speed[fan];
set_fan_speed(fan, new_fan_speed[fan]);
break;
default:
new_fan_speed[fan] = MIN(tmp_temp, 255U);
break;
}
}
#endif
#if ENABLED(PROBING_FANS_OFF)
bool Temperature::fans_paused; // = false;
uint8_t Temperature::paused_fan_speed[FAN_COUNT]; // = { 0 }
#endif
#if ENABLED(ADAPTIVE_FAN_SLOWING)
uint8_t Temperature::fan_speed_scaler[FAN_COUNT] = ARRAY_N(FAN_COUNT, 128, 128, 128, 128, 128, 128);
#endif
#if HAS_LCD_MENU
uint8_t Temperature::lcd_tmpfan_speed[
#if ENABLED(SINGLENOZZLE)
MAX(EXTRUDERS, FAN_COUNT)
#else
FAN_COUNT
#endif
]; // = { 0 }
#endif
void Temperature::set_fan_speed(uint8_t target, uint16_t speed) {
NOMORE(speed, 255U);
#if ENABLED(SINGLENOZZLE)
if (target != active_extruder) {
if (target < EXTRUDERS) singlenozzle_fan_speed[target] = speed;
return;
}
target = 0; // Always use fan index 0 with SINGLENOZZLE
#endif
if (target >= FAN_COUNT) return;
fan_speed[target] = speed;
#if ENABLED(ULTRA_LCD)
lcd_tmpfan_speed[target] = speed;
#endif
}
#if ENABLED(PROBING_FANS_OFF)
void Temperature::set_fans_paused(const bool p) {
if (p != fans_paused) {
fans_paused = p;
if (p)
for (uint8_t x = 0; x < FAN_COUNT; x++) {
paused_fan_speed[x] = fan_speed[x];
fan_speed[x] = 0;
}
else
for (uint8_t x = 0; x < FAN_COUNT; x++)
fan_speed[x] = paused_fan_speed[x];
}
}
#endif // PROBING_FANS_OFF
#endif // FAN_COUNT > 0
#if HAS_HEATED_BED
float Temperature::current_temperature_bed = 0.0;
int16_t Temperature::current_temperature_bed_raw = 0,
@ -1529,18 +1618,38 @@ void Temperature::init() {
switch (*state) {
// Inactive state waits for a target temperature to be set
case TRInactive: break;
// When first heating, wait for the temperature to be reached then go to Stable state
case TRFirstHeating:
if (current < tr_target_temperature[heater_index]) break;
*state = TRStable;
// While the temperature is stable watch for a bad temperature
case TRStable:
#if ENABLED(ADAPTIVE_FAN_SLOWING) && FAN_COUNT > 0
if (heater_id >= 0) {
const int fan_index = MIN(heater_id, FAN_COUNT - 1);
if (fan_speed[fan_index] == 0 || current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.25f))
fan_speed_scaler[fan_index] = 128;
else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.3335f))
fan_speed_scaler[fan_index] = 96;
else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.5f))
fan_speed_scaler[fan_index] = 64;
else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.8f))
fan_speed_scaler[fan_index] = 32;
else
fan_speed_scaler[fan_index] = 0;
}
#endif
if (current >= tr_target_temperature[heater_index] - hysteresis_degc) {
*timer = millis() + period_seconds * 1000UL;
break;
}
else if (PENDING(millis(), *timer)) break;
*state = TRRunaway;
case TRRunaway:
_temp_error(heater_id, PSTR(MSG_T_THERMAL_RUNAWAY), TEMP_ERR_PSTR(MSG_THERMAL_RUNAWAY, heater_id));
}

65
Marlin/src/module/temperature.h
View file

@ -320,6 +320,71 @@ class Temperature {
static float analog_to_celsiusChamber(const int raw);
#endif
#if FAN_COUNT > 0
static uint8_t fan_speed[FAN_COUNT];
#define FANS_LOOP(I) LOOP_L_N(I, FAN_COUNT)
static void set_fan_speed(const uint8_t target, const uint16_t speed);
#if ENABLED(PROBING_FANS_OFF)
static bool fans_paused;
static uint8_t paused_fan_speed[FAN_COUNT];
#endif
static constexpr inline uint8_t fanPercent(const uint8_t speed) { return (int(speed) * 100 + 127) / 255; }
#if ENABLED(ADAPTIVE_FAN_SLOWING)
static uint8_t fan_speed_scaler[FAN_COUNT];
#else
static constexpr uint8_t fan_speed_scaler[FAN_COUNT] = ARRAY_N(FAN_COUNT, 128, 128, 128, 128, 128, 128);
#endif
static inline uint8_t lcd_fanSpeedActual(const uint8_t target) {
return (fan_speed[target] * uint16_t(fan_speed_scaler[target])) >> 7;
}
#if ENABLED(EXTRA_FAN_SPEED)
static uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT];
static void set_temp_fan_speed(const uint8_t fan, const int16_t tmp_temp);
#endif
#if HAS_LCD_MENU
static uint8_t lcd_tmpfan_speed[
#if ENABLED(SINGLENOZZLE)
MAX(EXTRUDERS, FAN_COUNT)
#else
FAN_COUNT
#endif
];
static inline void lcd_setFanSpeed(const uint8_t target) { set_fan_speed(target, lcd_tmpfan_speed[target]); }
#if HAS_FAN0
FORCE_INLINE static void lcd_setFanSpeed0() { lcd_setFanSpeed(0); }
#endif
#if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1)
FORCE_INLINE static void lcd_setFanSpeed1() { lcd_setFanSpeed(1); }
#endif
#if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2)
FORCE_INLINE static void lcd_setFanSpeed2() { lcd_setFanSpeed(2); }
#endif
#endif // HAS_LCD_MENU
#if ENABLED(PROBING_FANS_OFF)
void set_fans_paused(const bool p);
#endif
#endif // FAN_COUNT > 0
static inline void zero_fan_speeds() {
#if FAN_COUNT > 0
FANS_LOOP(i) fan_speed[i] = 0;
#endif
}
/**
* Called from the Temperature ISR
*/

4
Marlin/src/module/tool_change.cpp
View file

@ -674,8 +674,8 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#if ENABLED(SINGLENOZZLE)
#if FAN_COUNT > 0
singlenozzle_fan_speed[active_extruder] = fan_speed[0];
fan_speed[0] = singlenozzle_fan_speed[tmp_extruder];
singlenozzle_fan_speed[active_extruder] = thermalManager.fan_speed[0];
thermalManager.fan_speed[0] = singlenozzle_fan_speed[tmp_extruder];
#endif
singlenozzle_temp[active_extruder] = thermalManager.target_temperature[0];

2
buildroot/share/tests/LPC1768_tests
View file

@ -36,7 +36,7 @@ opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 1
opt_set TEMP_SENSOR_1 5
opt_set TEMP_SENSOR_BED 1
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_SLOWING \
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \