Clean up excess whitespace, comment formatting
This commit is contained in:
Scott Lahteine
parent
a35c681453
commit
0a8e09c723
|
|
@ -2065,7 +2065,7 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
safe_delay(BLTOUCH_DELAY);
|
||||
}
|
||||
|
||||
//
|
||||
//
|
||||
// The BL-Touch probes have a HAL effect sensor. The high currents switching
|
||||
// on and off cause big magnetic fields that can affect the repeatability of the
|
||||
// sensor. So, for BL-Touch probes, we turn off the heaters during the actual probe.
|
||||
|
|
@ -2075,7 +2075,7 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
void turn_heaters_on_or_off_for_bltouch(const bool deploy) {
|
||||
static int8_t bltouch_recursion_cnt=0;
|
||||
static millis_t last_emi_protection=0;
|
||||
static float temps_at_entry[HOTENDS];
|
||||
static float temps_at_entry[HOTENDS];
|
||||
#if HAS_TEMP_BED
|
||||
static float bed_temp_at_entry;
|
||||
#endif
|
||||
|
|
@ -2088,19 +2088,19 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
if (deploy) {
|
||||
bltouch_recursion_cnt++;
|
||||
last_emi_protection = millis();
|
||||
HOTEND_LOOP() temps_at_entry[e] = thermalManager.degTargetHotend(e); // save the current target temperatures
|
||||
HOTEND_LOOP() temps_at_entry[e] = thermalManager.degTargetHotend(e); // save the current target temperatures
|
||||
HOTEND_LOOP() thermalManager.setTargetHotend(0, e); // so we know what to restore them to.
|
||||
|
||||
#if HAS_TEMP_BED
|
||||
bed_temp_at_entry = thermalManager.degTargetBed();
|
||||
thermalManager.setTargetBed(0.0);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
else {
|
||||
bltouch_recursion_cnt--; // the heaters are only turned back on
|
||||
if (bltouch_recursion_cnt==0 && ((last_emi_protection+20000L)>millis())) { // if everything is perfect. It is expected
|
||||
HOTEND_LOOP() thermalManager.setTargetHotend(temps_at_entry[e], e); // that the bltouch_recursion_cnt is zero and
|
||||
#if HAS_TEMP_BED // that the heaters were shut off less than
|
||||
HOTEND_LOOP() thermalManager.setTargetHotend(temps_at_entry[e], e); // that the bltouch_recursion_cnt is zero and
|
||||
#if HAS_TEMP_BED // that the heaters were shut off less than
|
||||
thermalManager.setTargetBed(bed_temp_at_entry); // 20 seconds ago
|
||||
#endif
|
||||
}
|
||||
|
|
@ -2113,12 +2113,12 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
turn_heaters_on_or_off_for_bltouch(deploy);
|
||||
#endif
|
||||
if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered
|
||||
bltouch_command(BLTOUCH_RESET); // try to reset it.
|
||||
bltouch_command(BLTOUCH_RESET); // try to reset it.
|
||||
bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to
|
||||
bltouch_command(BLTOUCH_STOW); // clear the triggered condition.
|
||||
safe_delay(1500); // wait for internal self test to complete
|
||||
// measured completion time was 0.65 seconds
|
||||
// after reset, deploy & stow sequence
|
||||
bltouch_command(BLTOUCH_STOW); // clear the triggered condition.
|
||||
safe_delay(1500); // Wait for internal self-test to complete.
|
||||
// (Measured completion time was 0.65 seconds
|
||||
// after reset, deploy, and stow sequence)
|
||||
if (TEST_BLTOUCH()) { // If it still claims to be triggered...
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH);
|
||||
|
|
@ -2328,15 +2328,15 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
return current_position[Z_AXIS] + zprobe_zoffset;
|
||||
}
|
||||
|
||||
//
|
||||
// - Move to the given XY
|
||||
// - Deploy the probe, if not already deployed
|
||||
// - Probe the bed, get the Z position
|
||||
// - Depending on the 'stow' flag
|
||||
// - Stow the probe, or
|
||||
// - Raise to the BETWEEN height
|
||||
// - Return the probed Z position
|
||||
//
|
||||
/**
|
||||
* - Move to the given XY
|
||||
* - Deploy the probe, if not already deployed
|
||||
* - Probe the bed, get the Z position
|
||||
* - Depending on the 'stow' flag
|
||||
* - Stow the probe, or
|
||||
* - Raise to the BETWEEN height
|
||||
* - Return the probed Z position
|
||||
*/
|
||||
float probe_pt(const float x, const float y, const bool stow/*=true*/, const int verbose_level/*=1*/) {
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) {
|
||||
|
|
@ -2505,14 +2505,14 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
|
||||
#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//
|
||||
// Enable if you prefer your output in JSON format
|
||||
// suitable for SCAD or JavaScript mesh visualizers.
|
||||
//
|
||||
// Visualize meshes in OpenSCAD using the included script.
|
||||
//
|
||||
// buildroot/shared/scripts/MarlinMesh.scad
|
||||
//
|
||||
/**
|
||||
* Enable to produce output in JSON format suitable
|
||||
* for SCAD or JavaScript mesh visualizers.
|
||||
*
|
||||
* Visualize meshes in OpenSCAD using the included script.
|
||||
*
|
||||
* buildroot/shared/scripts/MarlinMesh.scad
|
||||
*/
|
||||
//#define SCAD_MESH_OUTPUT
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -316,8 +316,7 @@
|
|||
#define K1 0.95 //smoothing factor within the PID
|
||||
|
||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||
|
||||
|
||||
|
||||
// FolgerTech i3-2020
|
||||
#define DEFAULT_Kp 11.50
|
||||
#define DEFAULT_Ki 0.50
|
||||
|
|
@ -921,7 +920,7 @@
|
|||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y 10
|
||||
#define UBL_PROBE_PT_1_X 45 // These set the probe locations for when UBL does a 3-Point leveling
|
||||
#define UBL_PROBE_PT_1_X 45 // These set the probe locations for when UBL does a 3-Point leveling
|
||||
#define UBL_PROBE_PT_1_Y 170 // of the mesh.
|
||||
#define UBL_PROBE_PT_2_X 45
|
||||
#define UBL_PROBE_PT_2_Y 25
|
||||
|
|
|
|||
|
|
@ -133,8 +133,8 @@
|
|||
//#define MOTHERBOARD BOARD_RAMPS_14_EEF
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and
|
||||
// I use Marlin to control the bed's temperature. So, if you have a single nozzle
|
||||
// machine, this will work fine for you. You just set the
|
||||
// #define TEMP_SENSOR_BED 75 to 0 down below so Marlin doesn't mess with the bed
|
||||
// machine, this will work fine for you. You just set the
|
||||
// #define TEMP_SENSOR_BED 75 to 0 down below so Marlin doesn't mess with the bed
|
||||
// temp.
|
||||
#endif
|
||||
|
||||
|
|
@ -261,8 +261,8 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 75 // gMax-1.5+ users please note: This is a Roxy modification to the printer. I want
|
||||
// to print on glass. And I'm using a 400mm x 400mm silicon heat pad powered through
|
||||
// a Fortek SSR to do it. If you are using an unaltered gCreate machine, this needs
|
||||
// to print on glass. And I'm using a 400mm x 400mm silicon heat pad powered through
|
||||
// a Fortek SSR to do it. If you are using an unaltered gCreate machine, this needs
|
||||
// to be set to 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
|
|
@ -325,12 +325,12 @@
|
|||
#define K1 0.95 //smoothing factor within the PID
|
||||
|
||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||
|
||||
|
||||
// gMax J-Head
|
||||
#define DEFAULT_Kp 15.35
|
||||
#define DEFAULT_Ki 0.85
|
||||
#define DEFAULT_Kd 69.45
|
||||
|
||||
|
||||
// Ultimaker
|
||||
// #define DEFAULT_Kp 22.2
|
||||
// #define DEFAULT_Ki 1.08
|
||||
|
|
@ -793,7 +793,7 @@
|
|||
#define Y_MIN_POS 0
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS 420 // These numbers are not accurate for an unaltered gMax 1.5+ printer. My print bed
|
||||
#define Y_MAX_POS 420 // is inset a noticable amount from the edge of the bed. Combined with the inset,
|
||||
#define Y_MAX_POS 420 // is inset a noticable amount from the edge of the bed. Combined with the inset,
|
||||
// the nozzle can reach all cordinates of the mesh.
|
||||
#define Z_MAX_POS 500
|
||||
|
||||
|
|
|
|||
|
|
@ -233,7 +233,7 @@
|
|||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Daha Akıt") // Daha Akıt
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Baskıyı sürdür") // Baskıyı sürdür
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Sıcaklık") // Min. Sıcaklık:
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozül: ") // Nozül:
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozül: ") // Nozül:
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
// Up to 3 lines allowed
|
||||
|
|
|
|||
|
|
@ -19,11 +19,11 @@ bool fastDigitalRead(uint8_t pin) {
|
|||
*/
|
||||
static inline __attribute__((always_inline))
|
||||
void fastDigitalWrite(uint8_t pin, bool value) {
|
||||
if (value) {
|
||||
*portSetRegister(pin) = 1;
|
||||
} else {
|
||||
*portClearRegister(pin) = 1;
|
||||
}
|
||||
if (value) {
|
||||
*portSetRegister(pin) = 1;
|
||||
} else {
|
||||
*portClearRegister(pin) = 1;
|
||||
}
|
||||
}
|
||||
#else // CORE_TEENSY
|
||||
//------------------------------------------------------------------------------
|
||||
|
|
@ -574,7 +574,7 @@ class DigitalPin {
|
|||
/** Parenthesis operator
|
||||
* @return Pin's level
|
||||
*/
|
||||
inline operator bool () const __attribute__((always_inline)) {
|
||||
inline operator bool () const __attribute__((always_inline)) {
|
||||
return read();
|
||||
}
|
||||
//----------------------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -50,11 +50,10 @@
|
|||
extern bool code_has_value();
|
||||
extern float probe_pt(float x, float y, bool, int);
|
||||
extern bool set_probe_deployed(bool);
|
||||
void smart_fill_mesh();
|
||||
void smart_fill_mesh();
|
||||
|
||||
bool ProbeStay = true;
|
||||
|
||||
|
||||
#define SIZE_OF_LITTLE_RAISE 0
|
||||
#define BIG_RAISE_NOT_NEEDED 0
|
||||
extern void lcd_quick_feedback();
|
||||
|
|
@ -189,13 +188,13 @@
|
|||
* P3 Phase 3 Fill the unpopulated regions of the Mesh with a fixed value. There are two different paths the
|
||||
* user can go down. If the user specifies the value using the C parameter, the closest invalid
|
||||
* mesh points to the nozzle will be filled. The user can specify a repeat count using the R
|
||||
* parameter with the C version of the command.
|
||||
* parameter with the C version of the command.
|
||||
*
|
||||
* A second version of the fill command is available if no C constant is specified. Not
|
||||
* A second version of the fill command is available if no C constant is specified. Not
|
||||
* specifying a C constant will invoke the 'Smart Fill' algorithm. The G29 P3 command will search
|
||||
* from the edges of the mesh inward looking for invalid mesh points. It will look at the next
|
||||
* several mesh points to determine if the print bed is sloped up or down. If the bed is sloped
|
||||
* upward from the invalid mesh point, it will be replaced with the value of the nearest mesh point.
|
||||
* upward from the invalid mesh point, it will be replaced with the value of the nearest mesh point.
|
||||
* If the bed is sloped downward from the invalid mesh point, it will be replaced with a value that
|
||||
* puts all three points in a line. The second version of the G29 P3 command is a quick, easy and
|
||||
* usually safe way to populate the unprobed regions of your mesh so you can continue to the G26
|
||||
|
|
@ -336,7 +335,7 @@
|
|||
repetition_cnt = code_has_value() ? code_value_int() : 1;
|
||||
while (repetition_cnt--) {
|
||||
if (cnt > 20) { cnt = 0; idle(); }
|
||||
const mesh_index_pair location = find_closest_mesh_point_of_type(REAL, x_pos, y_pos, USE_NOZZLE_AS_REFERENCE, NULL, false);
|
||||
const mesh_index_pair location = find_closest_mesh_point_of_type(REAL, x_pos, y_pos, USE_NOZZLE_AS_REFERENCE, NULL, false);
|
||||
if (location.x_index < 0) {
|
||||
SERIAL_PROTOCOLLNPGM("Entire Mesh invalidated.\n");
|
||||
break; // No more invalid Mesh Points to populate
|
||||
|
|
@ -460,7 +459,7 @@
|
|||
|
||||
case 3: {
|
||||
//
|
||||
// Populate invalid Mesh areas. Two choices are available to the user. The user can
|
||||
// Populate invalid Mesh areas. Two choices are available to the user. The user can
|
||||
// specify the constant to be used with a C # paramter. Or the user can allow the G29 P3 command to
|
||||
// apply a 'reasonable' constant to the invalid mesh point. Some caution and scrutiny should be used
|
||||
// on either of these paths!
|
||||
|
|
@ -811,9 +810,9 @@
|
|||
* Z is negative, we need to invert the sign of all components of the vector
|
||||
*/
|
||||
if ( normal.z < 0.0 ) {
|
||||
normal.x = -normal.x;
|
||||
normal.y = -normal.y;
|
||||
normal.z = -normal.z;
|
||||
normal.x = -normal.x;
|
||||
normal.y = -normal.y;
|
||||
normal.z = -normal.z;
|
||||
}
|
||||
|
||||
rotation = matrix_3x3::create_look_at( vector_3( normal.x, normal.y, 1));
|
||||
|
|
@ -863,7 +862,7 @@
|
|||
for (i = 0; i < GRID_MAX_POINTS_X; i++) {
|
||||
for (j = 0; j < GRID_MAX_POINTS_Y; j++) {
|
||||
float x_tmp, y_tmp, z_tmp;
|
||||
x_tmp = pgm_read_float(ubl.mesh_index_to_xpos[i]);
|
||||
x_tmp = pgm_read_float(ubl.mesh_index_to_xpos[i]);
|
||||
y_tmp = pgm_read_float(ubl.mesh_index_to_ypos[j]);
|
||||
z_tmp = ubl.z_values[i][j];
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
|
|
@ -947,7 +946,7 @@
|
|||
float last_x = -9999.99, last_y = -9999.99;
|
||||
mesh_index_pair location;
|
||||
do {
|
||||
location = find_closest_mesh_point_of_type(INVALID, lx, ly, USE_NOZZLE_AS_REFERENCE, NULL, false);
|
||||
location = find_closest_mesh_point_of_type(INVALID, lx, ly, USE_NOZZLE_AS_REFERENCE, NULL, false);
|
||||
// It doesn't matter if the probe can't reach the NAN location. This is a manual probe.
|
||||
if (location.x_index < 0 && location.y_index < 0) continue;
|
||||
|
||||
|
|
@ -1415,7 +1414,7 @@
|
|||
do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE);
|
||||
do_blocking_move_to_xy(lx, ly);
|
||||
do {
|
||||
location = find_closest_mesh_point_of_type(SET_IN_BITMAP, lx, ly, USE_NOZZLE_AS_REFERENCE, not_done, false);
|
||||
location = find_closest_mesh_point_of_type(SET_IN_BITMAP, lx, ly, USE_NOZZLE_AS_REFERENCE, not_done, false);
|
||||
// It doesn't matter if the probe can not reach this
|
||||
// location. This is a manual edit of the Mesh Point.
|
||||
if (location.x_index < 0 && location.y_index < 0) continue; // abort if we can't find any more points.
|
||||
|
|
@ -1500,7 +1499,7 @@
|
|||
}
|
||||
|
||||
//
|
||||
// The routine provides the 'Smart Fill' capability. It scans from the
|
||||
// The routine provides the 'Smart Fill' capability. It scans from the
|
||||
// outward edges of the mesh towards the center. If it finds an invalid
|
||||
// location, it uses the next two points (assumming they are valid) to
|
||||
// calculate a 'reasonable' value for the unprobed mesh point.
|
||||
|
|
@ -1510,14 +1509,14 @@
|
|||
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) { // Bottom of the mesh looking up
|
||||
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y-2; y++) {
|
||||
if (isnan(ubl.z_values[x][y])) {
|
||||
if (isnan(ubl.z_values[x][y+1])) // we only deal with the first NAN next to a block of
|
||||
if (isnan(ubl.z_values[x][y+1])) // we only deal with the first NAN next to a block of
|
||||
continue; // good numbers. we want 2 good numbers to extrapolate off of.
|
||||
if (isnan(ubl.z_values[x][y+2]))
|
||||
continue;
|
||||
if (isnan(ubl.z_values[x][y+2]))
|
||||
continue;
|
||||
if (ubl.z_values[x][y+1] < ubl.z_values[x][y+2]) // The bed is angled down near this edge. So to be safe, we
|
||||
ubl.z_values[x][y] = ubl.z_values[x][y+1]; // use the closest value, which is probably a little too high
|
||||
else {
|
||||
diff = ubl.z_values[x][y+1] - ubl.z_values[x][y+2]; // The bed is angled up near this edge. So we will use the closest
|
||||
diff = ubl.z_values[x][y+1] - ubl.z_values[x][y+2]; // The bed is angled up near this edge. So we will use the closest
|
||||
ubl.z_values[x][y] = ubl.z_values[x][y+1] + diff; // height and add in the difference between that and the next point
|
||||
}
|
||||
break;
|
||||
|
|
@ -1527,14 +1526,14 @@
|
|||
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) { // Top of the mesh looking down
|
||||
for (uint8_t y=GRID_MAX_POINTS_Y-1; y>=1; y--) {
|
||||
if (isnan(ubl.z_values[x][y])) {
|
||||
if (isnan(ubl.z_values[x][y-1])) // we only deal with the first NAN next to a block of
|
||||
if (isnan(ubl.z_values[x][y-1])) // we only deal with the first NAN next to a block of
|
||||
continue; // good numbers. we want 2 good numbers to extrapolate off of.
|
||||
if (isnan(ubl.z_values[x][y-2]))
|
||||
continue;
|
||||
if (isnan(ubl.z_values[x][y-2]))
|
||||
continue;
|
||||
if (ubl.z_values[x][y-1] < ubl.z_values[x][y-2]) // The bed is angled down near this edge. So to be safe, we
|
||||
ubl.z_values[x][y] = ubl.z_values[x][y-1]; // use the closest value, which is probably a little too high
|
||||
else {
|
||||
diff = ubl.z_values[x][y-1] - ubl.z_values[x][y-2]; // The bed is angled up near this edge. So we will use the closest
|
||||
diff = ubl.z_values[x][y-1] - ubl.z_values[x][y-2]; // The bed is angled up near this edge. So we will use the closest
|
||||
ubl.z_values[x][y] = ubl.z_values[x][y-1] + diff; // height and add in the difference between that and the next point
|
||||
}
|
||||
break;
|
||||
|
|
@ -1544,14 +1543,14 @@
|
|||
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) {
|
||||
for (uint8_t x = 0; x < GRID_MAX_POINTS_X-2; x++) { // Left side of the mesh looking right
|
||||
if (isnan(ubl.z_values[x][y])) {
|
||||
if (isnan(ubl.z_values[x+1][y])) // we only deal with the first NAN next to a block of
|
||||
if (isnan(ubl.z_values[x+1][y])) // we only deal with the first NAN next to a block of
|
||||
continue; // good numbers. we want 2 good numbers to extrapolate off of.
|
||||
if (isnan(ubl.z_values[x+2][y]))
|
||||
continue;
|
||||
if (isnan(ubl.z_values[x+2][y]))
|
||||
continue;
|
||||
if (ubl.z_values[x+1][y] < ubl.z_values[x+2][y]) // The bed is angled down near this edge. So to be safe, we
|
||||
ubl.z_values[x][y] = ubl.z_values[x][y+1]; // use the closest value, which is probably a little too high
|
||||
else {
|
||||
diff = ubl.z_values[x+1][y] - ubl.z_values[x+2][y]; // The bed is angled up near this edge. So we will use the closest
|
||||
diff = ubl.z_values[x+1][y] - ubl.z_values[x+2][y]; // The bed is angled up near this edge. So we will use the closest
|
||||
ubl.z_values[x][y] = ubl.z_values[x+1][y] + diff; // height and add in the difference between that and the next point
|
||||
}
|
||||
break;
|
||||
|
|
@ -1561,18 +1560,18 @@
|
|||
for (uint8_t y=0; y < GRID_MAX_POINTS_Y; y++) {
|
||||
for (uint8_t x=GRID_MAX_POINTS_X-1; x>=1; x--) { // Right side of the mesh looking left
|
||||
if (isnan(ubl.z_values[x][y])) {
|
||||
if (isnan(ubl.z_values[x-1][y])) // we only deal with the first NAN next to a block of
|
||||
if (isnan(ubl.z_values[x-1][y])) // we only deal with the first NAN next to a block of
|
||||
continue; // good numbers. we want 2 good numbers to extrapolate off of.
|
||||
if (isnan(ubl.z_values[x-2][y]))
|
||||
continue;
|
||||
if (isnan(ubl.z_values[x-2][y]))
|
||||
continue;
|
||||
if (ubl.z_values[x-1][y] < ubl.z_values[x-2][y]) // The bed is angled down near this edge. So to be safe, we
|
||||
ubl.z_values[x][y] = ubl.z_values[x-1][y]; // use the closest value, which is probably a little too high
|
||||
else {
|
||||
diff = ubl.z_values[x-1][y] - ubl.z_values[x-2][y]; // The bed is angled up near this edge. So we will use the closest
|
||||
diff = ubl.z_values[x-1][y] - ubl.z_values[x-2][y]; // The bed is angled up near this edge. So we will use the closest
|
||||
ubl.z_values[x][y] = ubl.z_values[x-1][y] + diff; // height and add in the difference between that and the next point
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1599,7 +1598,7 @@
|
|||
for(ix=0; ix<grid_size; ix++) {
|
||||
x = ((float)x_min) + ix*dx;
|
||||
for(iy=0; iy<grid_size; iy++) {
|
||||
if (zig_zag)
|
||||
if (zig_zag)
|
||||
y = ((float)y_min) + (grid_size-iy-1)*dy;
|
||||
else
|
||||
y = ((float)y_min) + iy*dy;
|
||||
|
|
@ -1665,7 +1664,7 @@
|
|||
for (i = 0; i < GRID_MAX_POINTS_X; i++) {
|
||||
for (j = 0; j < GRID_MAX_POINTS_Y; j++) {
|
||||
float x_tmp, y_tmp, z_tmp;
|
||||
x_tmp = pgm_read_float(&(ubl.mesh_index_to_xpos[i]));
|
||||
x_tmp = pgm_read_float(&(ubl.mesh_index_to_xpos[i]));
|
||||
y_tmp = pgm_read_float(&(ubl.mesh_index_to_ypos[j]));
|
||||
z_tmp = ubl.z_values[i][j];
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
|
|
|
|||
|
|
@ -533,7 +533,7 @@ void lcd_print(char c) { charset_mapper(c); }
|
|||
lcd.clear();
|
||||
|
||||
safe_delay(100);
|
||||
|
||||
|
||||
lcd_set_custom_characters(
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
false
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ void safe_delay(millis_t ms) {
|
|||
thermalManager.manage_heater();
|
||||
}
|
||||
delay(ms);
|
||||
thermalManager.manage_heater(); // This keeps us safe if too many small safe_delay() calls are made
|
||||
thermalManager.manage_heater(); // This keeps us safe if too many small safe_delay() calls are made
|
||||
}
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
|
|
|||
Loading…
Reference in a new issue