MPX_ARM_MINI board (Mingda MD-16) (#20711)
This commit is contained in:
rafaljot
GitHub
parent
9d0e64a725
commit
0d2645b3e1
|
|
@ -338,6 +338,7 @@
|
|||
#define BOARD_FLY_MINI 4045 // FLY MINI (STM32F103RCT6)
|
||||
#define BOARD_FLSUN_HISPEED 4046 // FLSUN HiSpeedV1 (STM32F103VET6)
|
||||
#define BOARD_BEAST 4047 // STM32F103RET6 Libmaple-based controller
|
||||
#define BOARD_MINGDA_MPX_ARM_MINI 4048 // STM32F103ZET6 Mingda MD-16
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
|
|
|||
|
|
@ -548,6 +548,8 @@
|
|||
#include "stm32f1/pins_FLSUN_HISPEED.h" // STM32F1 env:flsun_hispeed
|
||||
#elif MB(BEAST)
|
||||
#include "stm32f1/pins_BEAST.h" // STM32F1 env:STM32F103RE
|
||||
#elif MB(MINGDA_MPX_ARM_MINI)
|
||||
#include "stm32f1/pins_MINGDA_MPX_ARM_MINI.h" // STM32F1 env:STM32F103RE
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
|
|
|||
176
Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h
Normal file
176
Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h
Normal file
|
|
@ -0,0 +1,176 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* MKS Robin mini (STM32F130VET6) board pin assignments
|
||||
*/
|
||||
|
||||
#if NOT_TARGET(STM32F1, STM32F1xx)
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 2 || E_STEPPERS > 2
|
||||
#error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "Mingda MPX_ARM_MINI"
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
#define DISABLE_DEBUG
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
|
||||
/*
|
||||
//Mingda used an unknown EEPROM chip ATMLH753, so I turned on the emulation below.
|
||||
//It is connected to EEPROM PB6 PB7
|
||||
|
||||
#define I2C_EEPROM
|
||||
#undef NO_EEPROM_SELECTED
|
||||
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
|
||||
#define USE_SHARED_EEPROM 1 // Use Platform-independent Arduino functions for I2C EEPROM
|
||||
#define E2END 0xFFFF // EEPROM end address AT24C256 (32kB)
|
||||
*/
|
||||
|
||||
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#define EEPROM_PAGE_SIZE 0x800U // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
#endif
|
||||
|
||||
#define SPI_DEVICE 2
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PD6
|
||||
#define X_MAX_PIN PG15
|
||||
#define Y_MIN_PIN PG9
|
||||
#define Y_MAX_PIN PG14
|
||||
#define Z_MIN_PIN PG10
|
||||
#define Z_MAX_PIN PG13
|
||||
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PG11
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PD13
|
||||
#define X_STEP_PIN PD12
|
||||
#define X_DIR_PIN PD11
|
||||
|
||||
#define Y_ENABLE_PIN PG4
|
||||
#define Y_STEP_PIN PG3
|
||||
#define Y_DIR_PIN PG2
|
||||
|
||||
#define Z_ENABLE_PIN PG7
|
||||
#define Z_STEP_PIN PG6
|
||||
#define Z_DIR_PIN PG5
|
||||
|
||||
#define E0_ENABLE_PIN PC7
|
||||
#define E0_STEP_PIN PC6
|
||||
#define E0_DIR_PIN PG8
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
//#define TEMP_0_PIN PF6 // THERM_E0
|
||||
//#define TEMP_0_PIN PB3 // E0 K+
|
||||
#define TEMP_BED_PIN PF7 // THERM_BED
|
||||
|
||||
#define MAX6675_SS_PIN PB5
|
||||
#define MAX6675_SCK_PIN PB3
|
||||
#define MAX6675_DO_PIN PB4
|
||||
#define MAX6675_MOSI_PIN PA14
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PB0
|
||||
#define HEATER_BED_PIN PB1
|
||||
|
||||
#define FAN_PIN PA0 // FAN
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#define SDIO_SUPPORT
|
||||
#define SDIO_CLOCK 4500000 // 4.5 MHz
|
||||
#define SDIO_READ_RETRIES 16
|
||||
|
||||
#define SD_DETECT_PIN PC5
|
||||
#define ONBOARD_SPI_DEVICE 1 // SPI1
|
||||
#define ONBOARD_SD_CS_PIN PC10
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#define BEEPER_PIN PE4
|
||||
|
||||
/**
|
||||
* Note: MKS Robin TFT screens use various TFT controllers.
|
||||
* If the screen stays white, disable 'LCD_RESET_PIN'
|
||||
* to let the bootloader init the screen.
|
||||
*/
|
||||
#if HAS_FSMC_TFT
|
||||
/**
|
||||
* Note: MKS Robin TFT screens use various TFT controllers
|
||||
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
|
||||
* ILI9488 is not supported
|
||||
* Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
|
||||
*
|
||||
* If the screen stays white, disable 'TFT_RESET_PIN'
|
||||
* to let the bootloader init the screen.
|
||||
*
|
||||
* Setting an 'TFT_RESET_PIN' may cause a flicker when entering the LCD menu
|
||||
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
|
||||
*/
|
||||
#define TFT_CS_PIN PD7 // NE4
|
||||
#define TFT_RS_PIN PG0 // A0
|
||||
|
||||
#define FSMC_CS_PIN TFT_CS_PIN
|
||||
#define FSMC_RS_PIN TFT_RS_PIN
|
||||
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
|
||||
#define TFT_RESET_PIN PF15
|
||||
#define TFT_BACKLIGHT_PIN PF11
|
||||
|
||||
#define TOUCH_BUTTONS_HW_SPI
|
||||
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
|
||||
#endif
|
||||
|
||||
#if NEED_TOUCH_PINS
|
||||
#define TOUCH_CS_PIN PA4 // SPI2_NSS
|
||||
#define TOUCH_SCK_PIN PA5 // SPI2_SCK
|
||||
#define TOUCH_MISO_PIN PA6 // SPI2_MISO
|
||||
#define TOUCH_MOSI_PIN PA7 // SPI2_MOSI
|
||||
#endif
|
||||
|
|
@ -1524,6 +1524,23 @@ build_flags = ${stm32_flash_drive.build_flags}
|
|||
-DUSE_USB_HS_IN_FS
|
||||
-DUSBD_USE_CDC
|
||||
|
||||
#
|
||||
# Mingda MPX_ARM_MINI
|
||||
#
|
||||
|
||||
[env:mingda_mpx_arm_mini]
|
||||
platform = ${common_stm32.platform}
|
||||
extends = common_stm32
|
||||
board = genericSTM32F103ZE
|
||||
board_build.core = stm32
|
||||
board_build.variant = MARLIN_F103Zx
|
||||
board_build.ldscript = ldscript.ld
|
||||
board_build.offset = 0x10000
|
||||
build_flags = ${common_stm32.build_flags} -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
|
||||
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
|
||||
extra_scripts = ${common.extra_scripts} pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
|
||||
|
||||
#################################
|
||||
# #
|
||||
# Other Architectures #
|
||||
|
|
|
|||
Loading…
Reference in a new issue