Merge pull request #6697 from thinkyhead/bf_wednesday_cleanup
Wednesday-Thursday cleaning up after
This commit is contained in:
Scott Lahteine
GitHub
commit
0d48fd4b6b
|
|
@ -731,15 +731,12 @@
|
|||
* Set granular options based on the specific type of leveling
|
||||
*/
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(DELTA)
|
||||
#define UBL_DELTA
|
||||
#endif
|
||||
|
||||
#define UBL_DELTA (ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(DELTA))
|
||||
#define ABL_PLANAR (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT))
|
||||
#define ABL_GRID (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR))
|
||||
#define HAS_ABL (ABL_PLANAR || ABL_GRID || ENABLED(AUTO_BED_LEVELING_UBL))
|
||||
#define HAS_LEVELING (HAS_ABL || ENABLED(MESH_BED_LEVELING))
|
||||
#define PLANNER_LEVELING (ABL_PLANAR || ABL_GRID || ENABLED(MESH_BED_LEVELING) || ENABLED(UBL_DELTA))
|
||||
#define PLANNER_LEVELING (ABL_PLANAR || ABL_GRID || ENABLED(MESH_BED_LEVELING) || UBL_DELTA)
|
||||
#define HAS_PROBING_PROCEDURE (HAS_ABL || ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST))
|
||||
#if HAS_PROBING_PROCEDURE
|
||||
#define PROBE_BED_WIDTH abs(RIGHT_PROBE_BED_POSITION - (LEFT_PROBE_BED_POSITION))
|
||||
|
|
@ -823,8 +820,7 @@
|
|||
/**
|
||||
* DELTA_SEGMENT_MIN_LENGTH for UBL_DELTA
|
||||
*/
|
||||
|
||||
#if ENABLED(UBL_DELTA)
|
||||
#if UBL_DELTA
|
||||
#ifndef DELTA_SEGMENT_MIN_LENGTH
|
||||
#if IS_SCARA
|
||||
#define DELTA_SEGMENT_MIN_LENGTH 0.25 // SCARA minimum segment size is 0.25mm
|
||||
|
|
@ -836,4 +832,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// Shorthand
|
||||
#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
|
||||
|
||||
#endif // CONDITIONALS_POST_H
|
||||
|
|
|
|||
|
|
@ -100,7 +100,7 @@
|
|||
* 'n' can be used instead if your host program does not appreciate you using 'N'.
|
||||
*
|
||||
* O # Ooooze How much your nozzle will Ooooze filament while getting in position to print. This
|
||||
* is over kill, but using this parameter will let you get the very first 'cicle' perfect
|
||||
* is over kill, but using this parameter will let you get the very first 'circle' perfect
|
||||
* so you have a trophy to peel off of the bed and hang up to show how perfectly you have your
|
||||
* Mesh calibrated. If not specified, a filament length of .3mm is assumed.
|
||||
*
|
||||
|
|
@ -152,7 +152,7 @@
|
|||
bool turn_on_heaters();
|
||||
bool prime_nozzle();
|
||||
|
||||
static uint16_t circle_flags[16], horizontal_mesh_line_flags[16], vertical_mesh_line_flags[16], continue_with_closest = 0;
|
||||
static uint16_t circle_flags[16], horizontal_mesh_line_flags[16], vertical_mesh_line_flags[16];
|
||||
float g26_e_axis_feedrate = 0.020,
|
||||
random_deviation = 0.0,
|
||||
layer_height = LAYER_HEIGHT;
|
||||
|
|
@ -176,7 +176,7 @@
|
|||
|
||||
static int8_t prime_flag = 0;
|
||||
|
||||
static bool keep_heaters_on = false;
|
||||
static bool continue_with_closest, keep_heaters_on;
|
||||
|
||||
static int16_t g26_repeats;
|
||||
|
||||
|
|
@ -278,8 +278,7 @@
|
|||
|
||||
// If this mesh location is outside the printable_radius, skip it.
|
||||
|
||||
if ( ! position_is_reachable_raw_xy( circle_x, circle_y ))
|
||||
continue;
|
||||
if (!position_is_reachable_raw_xy(circle_x, circle_y)) continue;
|
||||
|
||||
xi = location.x_index; // Just to shrink the next few lines and make them easier to understand
|
||||
yi = location.y_index;
|
||||
|
|
@ -329,9 +328,7 @@
|
|||
ye = circle_y + sin_table[tmp_div_30 + 1];
|
||||
#if IS_KINEMATIC
|
||||
// Check to make sure this segment is entirely on the bed, skip if not.
|
||||
if (( ! position_is_reachable_raw_xy( x , y )) ||
|
||||
( ! position_is_reachable_raw_xy( xe, ye )))
|
||||
continue;
|
||||
if (!position_is_reachable_raw_xy(x, y) || !position_is_reachable_raw_xy(xe, ye)) continue;
|
||||
#else // not, we need to skip
|
||||
x = constrain(x, X_MIN_POS + 1, X_MAX_POS - 1); // This keeps us from bumping the endstops
|
||||
y = constrain(y, Y_MIN_POS + 1, Y_MAX_POS - 1);
|
||||
|
|
@ -361,7 +358,7 @@
|
|||
|
||||
//debug_current_and_destination(PSTR("Done with current circle."));
|
||||
|
||||
} while (location.x_index >= 0 && location.y_index >= 0 && g26_repeats--);
|
||||
} while (--g26_repeats && location.x_index >= 0 && location.y_index >= 0);
|
||||
|
||||
LEAVE:
|
||||
lcd_reset_alert_level();
|
||||
|
|
@ -459,8 +456,7 @@
|
|||
sy = ey = constrain(pgm_read_float(&ubl.mesh_index_to_ypos[j]), Y_MIN_POS + 1, Y_MAX_POS - 1);
|
||||
ex = constrain(ex, X_MIN_POS + 1, X_MAX_POS - 1);
|
||||
|
||||
if (( position_is_reachable_raw_xy( sx, sy )) &&
|
||||
( position_is_reachable_raw_xy( ex, ey ))) {
|
||||
if (position_is_reachable_raw_xy(sx, sy) && position_is_reachable_raw_xy(ex, ey)) {
|
||||
|
||||
if (ubl.g26_debug_flag) {
|
||||
SERIAL_ECHOPAIR(" Connecting with horizontal line (sx=", sx);
|
||||
|
|
@ -494,8 +490,7 @@
|
|||
sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1);
|
||||
ey = constrain(ey, Y_MIN_POS + 1, Y_MAX_POS - 1);
|
||||
|
||||
if (( position_is_reachable_raw_xy( sx, sy )) &&
|
||||
( position_is_reachable_raw_xy( ex, ey ))) {
|
||||
if (position_is_reachable_raw_xy(sx, sy) && position_is_reachable_raw_xy(ex, ey)) {
|
||||
|
||||
if (ubl.g26_debug_flag) {
|
||||
SERIAL_ECHOPAIR(" Connecting with vertical line (sx=", sx);
|
||||
|
|
@ -655,9 +650,11 @@
|
|||
prime_length = PRIME_LENGTH;
|
||||
bed_temp = BED_TEMP;
|
||||
hotend_temp = HOTEND_TEMP;
|
||||
ooze_amount = OOZE_AMOUNT;
|
||||
prime_flag = 0;
|
||||
keep_heaters_on = false;
|
||||
|
||||
ooze_amount = code_seen('O') && code_has_value() ? code_value_linear_units() : OOZE_AMOUNT;
|
||||
keep_heaters_on = code_seen('K') && code_value_bool();
|
||||
continue_with_closest = code_seen('C') && code_value_bool();
|
||||
|
||||
if (code_seen('B')) {
|
||||
bed_temp = code_value_temp_abs();
|
||||
|
|
@ -667,8 +664,6 @@
|
|||
}
|
||||
}
|
||||
|
||||
if (code_seen('C')) continue_with_closest++;
|
||||
|
||||
if (code_seen('L')) {
|
||||
layer_height = code_value_linear_units();
|
||||
if (!WITHIN(layer_height, 0.0, 2.0)) {
|
||||
|
|
@ -691,7 +686,7 @@
|
|||
}
|
||||
}
|
||||
|
||||
if (code_seen('N') || code_seen('n')) {
|
||||
if (code_seen('N') || code_seen('n')) { // Warning! Use of 'N' / lowercase flouts established standards.
|
||||
nozzle = code_value_float();
|
||||
if (!WITHIN(nozzle, 0.1, 1.0)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Specified nozzle size not plausible.");
|
||||
|
|
@ -699,11 +694,6 @@
|
|||
}
|
||||
}
|
||||
|
||||
if (code_seen('K')) keep_heaters_on++;
|
||||
|
||||
if (code_seen('O') && code_has_value())
|
||||
ooze_amount = code_value_linear_units();
|
||||
|
||||
if (code_seen('P')) {
|
||||
if (!code_has_value())
|
||||
prime_flag = -1;
|
||||
|
|
@ -738,34 +728,20 @@
|
|||
}
|
||||
}
|
||||
|
||||
if (code_seen('M')) {
|
||||
if (code_seen('M')) { // Warning! Use of 'M' flouts established standards.
|
||||
randomSeed(millis());
|
||||
// This setting will persist for the next G26
|
||||
random_deviation = code_has_value() ? code_value_float() : 50.0;
|
||||
}
|
||||
|
||||
if (code_seen('R')) {
|
||||
g26_repeats = code_has_value() ? code_value_int() : 999;
|
||||
|
||||
if (g26_repeats <= 0) {
|
||||
SERIAL_PROTOCOLLNPGM("?(R)epeat value not plausible; must be greater than 0.");
|
||||
g26_repeats = code_seen('R') ? (code_has_value() ? code_value_int() : 999) : 1;
|
||||
if (g26_repeats < 1) {
|
||||
SERIAL_PROTOCOLLNPGM("?(R)epeat value not plausible; must be at least 1.");
|
||||
return UBL_ERR;
|
||||
}
|
||||
|
||||
g26_repeats--;
|
||||
}
|
||||
|
||||
|
||||
x_pos = current_position[X_AXIS];
|
||||
y_pos = current_position[Y_AXIS];
|
||||
|
||||
if (code_seen('X')) {
|
||||
x_pos = code_value_float();
|
||||
}
|
||||
|
||||
if (code_seen('Y')) {
|
||||
y_pos = code_value_float();
|
||||
}
|
||||
|
||||
x_pos = code_seen('X') ? code_value_linear_units() : current_position[X_AXIS];
|
||||
y_pos = code_seen('Y') ? code_value_linear_units() : current_position[Y_AXIS];
|
||||
if (!position_is_reachable_xy(x_pos, y_pos)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds.");
|
||||
return UBL_ERR;
|
||||
|
|
|
|||
|
|
@ -56,6 +56,8 @@
|
|||
* G12 - Clean tool
|
||||
* G20 - Set input units to inches
|
||||
* G21 - Set input units to millimeters
|
||||
* G26 - Mesh Validation Pattern (Requires UBL_G26_MESH_EDITING)
|
||||
* G27 - Park Nozzle (Requires NOZZLE_PARK_FEATURE)
|
||||
* G28 - Home one or more axes
|
||||
* G29 - Detailed Z probe, probes the bed at 3 or more points. Will fail if you haven't homed yet.
|
||||
* G30 - Single Z probe, probes bed at X Y location (defaults to current XY location)
|
||||
|
|
@ -97,14 +99,15 @@
|
|||
* M76 - Pause the print job timer.
|
||||
* M77 - Stop the print job timer.
|
||||
* M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER)
|
||||
* M80 - Turn on Power Supply. (Requires POWER_SUPPLY)
|
||||
* M81 - Turn off Power Supply. (Requires POWER_SUPPLY)
|
||||
* M80 - Turn on Power Supply. (Requires POWER_SUPPLY > 0)
|
||||
* M81 - Turn off Power Supply. (Requires POWER_SUPPLY > 0)
|
||||
* M82 - Set E codes absolute (default).
|
||||
* M83 - Set E codes relative while in Absolute (G90) mode.
|
||||
* M84 - Disable steppers until next move, or use S<seconds> to specify an idle
|
||||
* duration after which steppers should turn off. S0 disables the timeout.
|
||||
* M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
|
||||
* M92 - Set planner.axis_steps_per_mm for one or more axes.
|
||||
* M100 - Watch Free Memory (for debugging) (Requires M100_FREE_MEMORY_WATCHER)
|
||||
* M104 - Set extruder target temp.
|
||||
* M105 - Report current temperatures.
|
||||
* M106 - Fan on.
|
||||
|
|
@ -210,7 +213,6 @@
|
|||
* M364 - SCARA calibration: Move to cal-position PSIC (90 deg to Theta calibration position)
|
||||
*
|
||||
* ************ Custom codes - This can change to suit future G-code regulations
|
||||
* M100 - Watch Free Memory (For Debugging). (Requires M100_FREE_MEMORY_WATCHER)
|
||||
* M928 - Start SD logging: "M928 filename.gco". Stop with M29. (Requires SDSUPPORT)
|
||||
* M999 - Restart after being stopped by error
|
||||
*
|
||||
|
|
@ -2425,8 +2427,11 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
#if ENABLED(UBL_DELTA)
|
||||
if (( ubl.state.active ) && ( ! enable )) { // leveling from on to off
|
||||
#if PLANNER_LEVELING
|
||||
if (ubl.state.active != enable) {
|
||||
if (!enable) // leveling from on to off
|
||||
planner.apply_leveling(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS]);
|
||||
else
|
||||
planner.unapply_leveling(current_position);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -3729,7 +3734,7 @@ inline void gcode_G28() {
|
|||
// Disable the leveling matrix before homing
|
||||
#if HAS_LEVELING
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
const bool bed_leveling_state_at_entry = ubl.state.active;
|
||||
const bool ubl_state_at_entry = ubl.state.active;
|
||||
#endif
|
||||
set_bed_leveling_enabled(false);
|
||||
#endif
|
||||
|
|
@ -3872,8 +3877,9 @@ inline void gcode_G28() {
|
|||
// move to a height where we can use the full xy-area
|
||||
do_blocking_move_to_z(delta_clip_start_height);
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
set_bed_leveling_enabled(bed_leveling_state_at_entry);
|
||||
set_bed_leveling_enabled(ubl_state_at_entry);
|
||||
#endif
|
||||
|
||||
clean_up_after_endstop_or_probe_move();
|
||||
|
|
@ -4028,7 +4034,7 @@ void home_all_axes() { gcode_G28(); }
|
|||
#endif
|
||||
}
|
||||
// If there's another point to sample, move there with optional lift.
|
||||
if (mbl_probe_index < (GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y)) {
|
||||
if (mbl_probe_index < GRID_MAX_POINTS) {
|
||||
mbl.zigzag(mbl_probe_index, px, py);
|
||||
_manual_goto_xy(mbl.index_to_xpos[px], mbl.index_to_ypos[py]);
|
||||
|
||||
|
|
@ -4247,8 +4253,6 @@ void home_all_axes() { gcode_G28(); }
|
|||
ABL_VAR int left_probe_bed_position, right_probe_bed_position, front_probe_bed_position, back_probe_bed_position;
|
||||
ABL_VAR float xGridSpacing, yGridSpacing;
|
||||
|
||||
#define ABL_GRID_MAX (GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y)
|
||||
|
||||
#if ABL_PLANAR
|
||||
ABL_VAR uint8_t abl_grid_points_x = GRID_MAX_POINTS_X,
|
||||
abl_grid_points_y = GRID_MAX_POINTS_Y;
|
||||
|
|
@ -4262,7 +4266,7 @@ void home_all_axes() { gcode_G28(); }
|
|||
#if ABL_PLANAR
|
||||
ABL_VAR int abl2;
|
||||
#else // 3-point
|
||||
int constexpr abl2 = ABL_GRID_MAX;
|
||||
int constexpr abl2 = GRID_MAX_POINTS;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -4274,8 +4278,8 @@ void home_all_axes() { gcode_G28(); }
|
|||
|
||||
ABL_VAR int indexIntoAB[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
|
||||
|
||||
ABL_VAR float eqnAMatrix[ABL_GRID_MAX * 3], // "A" matrix of the linear system of equations
|
||||
eqnBVector[ABL_GRID_MAX], // "B" vector of Z points
|
||||
ABL_VAR float eqnAMatrix[GRID_MAX_POINTS * 3], // "A" matrix of the linear system of equations
|
||||
eqnBVector[GRID_MAX_POINTS], // "B" vector of Z points
|
||||
mean;
|
||||
#endif
|
||||
|
||||
|
|
@ -7619,7 +7623,6 @@ inline void gcode_M205() {
|
|||
if (code_seen('H')) {
|
||||
home_offset[Z_AXIS] = code_value_linear_units() - DELTA_HEIGHT;
|
||||
current_position[Z_AXIS] += code_value_linear_units() - DELTA_HEIGHT - home_offset[Z_AXIS];
|
||||
home_offset[Z_AXIS] = code_value_linear_units() - DELTA_HEIGHT;
|
||||
update_software_endstops(Z_AXIS);
|
||||
}
|
||||
if (code_seen('L')) delta_diagonal_rod = code_value_linear_units();
|
||||
|
|
@ -8413,17 +8416,15 @@ void quickstop_stepper() {
|
|||
* Use either 'M421 X<linear> Y<linear> Z<linear>' or 'M421 I<xindex> J<yindex> Z<linear>'
|
||||
*/
|
||||
inline void gcode_M421() {
|
||||
int8_t px = 0, py = 0;
|
||||
float z = 0;
|
||||
bool hasX, hasY, hasZ, hasI, hasJ;
|
||||
if ((hasX = code_seen('X'))) px = mbl.probe_index_x(code_value_linear_units());
|
||||
if ((hasY = code_seen('Y'))) py = mbl.probe_index_y(code_value_linear_units());
|
||||
if ((hasI = code_seen('I'))) px = code_value_linear_units();
|
||||
if ((hasJ = code_seen('J'))) py = code_value_linear_units();
|
||||
if ((hasZ = code_seen('Z'))) z = code_value_linear_units();
|
||||
|
||||
const bool hasX = code_seen('X'), hasI = !hasX && code_seen('I');
|
||||
const int8_t px = hasX || hasI ? mbl.probe_index_x(code_value_linear_units()) : 0;
|
||||
const bool hasY = code_seen('Y'), hasJ = !hasY && code_seen('J');
|
||||
const int8_t py = hasY || hasJ ? mbl.probe_index_y(code_value_linear_units()) : 0;
|
||||
const bool hasZ = code_seen('Z');
|
||||
const float z = hasZ ? code_value_linear_units() : 0;
|
||||
|
||||
if (hasX && hasY && hasZ) {
|
||||
|
||||
if (px >= 0 && py >= 0)
|
||||
mbl.set_z(px, py, z);
|
||||
else {
|
||||
|
|
@ -8450,18 +8451,18 @@ void quickstop_stepper() {
|
|||
/**
|
||||
* M421: Set a single Mesh Bed Leveling Z coordinate
|
||||
*
|
||||
* Usage:
|
||||
* M421 I<xindex> J<yindex> Z<linear>
|
||||
* or
|
||||
* M421 I<xindex> J<yindex> Q<offset>
|
||||
*/
|
||||
inline void gcode_M421() {
|
||||
int8_t px = 0, py = 0;
|
||||
float z = 0;
|
||||
bool hasI, hasJ, hasZ, hasQ;
|
||||
if ((hasI = code_seen('I'))) px = code_value_int();
|
||||
if ((hasJ = code_seen('J'))) py = code_value_int();
|
||||
if ((hasZ = code_seen('Z'))) z = code_value_linear_units();
|
||||
if ((hasQ = code_seen('Q'))) z = code_value_linear_units();
|
||||
|
||||
const bool hasI = code_seen('I');
|
||||
const int8_t px = hasI ? code_value_int() : 0;
|
||||
const bool hasJ = code_seen('J');
|
||||
const int8_t py = hasJ ? code_value_int() : 0;
|
||||
const bool hasZ = code_seen('Z'), hasQ = !hasZ && code_seen('Q');
|
||||
const float z = hasZ || hasQ ? code_value_linear_units() : 0;
|
||||
|
||||
if (!hasI || !hasJ || (hasQ && hasZ) || (!hasQ && !hasZ)) {
|
||||
SERIAL_ERROR_START;
|
||||
|
|
@ -8494,35 +8495,33 @@ void quickstop_stepper() {
|
|||
/**
|
||||
* M421: Set a single Mesh Bed Leveling Z coordinate
|
||||
*
|
||||
* Usage:
|
||||
* M421 I<xindex> J<yindex> Z<linear>
|
||||
* or
|
||||
* M421 I<xindex> J<yindex> Q<offset>
|
||||
* M421 C Z<linear>
|
||||
* M421 C Q<offset>
|
||||
*/
|
||||
|
||||
//todo: change multiple points simultaneously?
|
||||
|
||||
inline void gcode_M421() {
|
||||
int8_t px = 0, py = 0;
|
||||
float z = 0;
|
||||
bool hasI, hasJ, hasZ, hasQ, hasC;
|
||||
if ((hasI = code_seen('I'))) px = code_value_int();
|
||||
if ((hasJ = code_seen('J'))) py = code_value_int();
|
||||
if ((hasZ = code_seen('Z'))) z = code_value_linear_units();
|
||||
if ((hasQ = code_seen('Q'))) z = code_value_linear_units();
|
||||
hasC = code_seen('C');
|
||||
|
||||
if ( (!(hasI && hasJ) && !hasC) || (hasQ && hasZ) || (!hasQ && !hasZ)) {
|
||||
// Get the closest position for 'C', if needed
|
||||
const mesh_index_pair location = find_closest_mesh_point_of_type(REAL, current_position[X_AXIS], current_position[Y_AXIS], USE_NOZZLE_AS_REFERENCE, NULL, false);
|
||||
|
||||
const bool hasC = code_seen('C'), hasI = code_seen('I');
|
||||
const int8_t px = hasC ? location.x_index : hasI ? code_value_int() : 0;
|
||||
|
||||
const bool hasJ = code_seen('J');
|
||||
const int8_t py = hasC ? location.y_index : hasJ ? code_value_int() : 0;
|
||||
|
||||
const bool hasZ = code_seen('Z'), hasQ = !hasZ && code_seen('Q');
|
||||
const float z = hasZ || hasQ ? code_value_linear_units() : 0;
|
||||
|
||||
if ( ((hasI && hasJ) == hasC) || (hasQ && hasZ) || (!hasQ && !hasZ)) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
|
||||
return;
|
||||
}
|
||||
|
||||
if (hasC) { // get closest position
|
||||
const mesh_index_pair location = find_closest_mesh_point_of_type(REAL, current_position[X_AXIS], current_position[Y_AXIS], USE_NOZZLE_AS_REFERENCE, NULL, false);
|
||||
px = location.x_index;
|
||||
py = location.y_index;
|
||||
}
|
||||
|
||||
if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_Y - 1)) {
|
||||
if (hasZ) // doing an absolute mesh value
|
||||
ubl.z_values[px][py] = z;
|
||||
|
|
@ -8534,7 +8533,8 @@ void quickstop_stepper() {
|
|||
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // AUTO_BED_LEVELING_UBL
|
||||
|
||||
#if HAS_M206_COMMAND
|
||||
|
||||
|
|
@ -11106,7 +11106,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
|
|||
|
||||
#endif // AUTO_BED_LEVELING_BILINEAR
|
||||
|
||||
#if IS_KINEMATIC && DISABLED(UBL_DELTA)
|
||||
#if IS_KINEMATIC && !UBL_DELTA
|
||||
|
||||
/**
|
||||
* Prepare a linear move in a DELTA or SCARA setup.
|
||||
|
|
@ -11117,7 +11117,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
|
|||
inline bool prepare_kinematic_move_to(float ltarget[XYZE]) {
|
||||
|
||||
// Get the top feedrate of the move in the XY plane
|
||||
float _feedrate_mm_s = MMS_SCALED(feedrate_mm_s);
|
||||
const float _feedrate_mm_s = MMS_SCALED(feedrate_mm_s);
|
||||
|
||||
// If the move is only in Z/E don't split up the move
|
||||
if (ltarget[X_AXIS] == current_position[X_AXIS] && ltarget[Y_AXIS] == current_position[Y_AXIS]) {
|
||||
|
|
@ -11142,7 +11142,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
|
|||
if (UNEAR_ZERO(cartesian_mm)) return true;
|
||||
|
||||
// Minimum number of seconds to move the given distance
|
||||
float seconds = cartesian_mm / _feedrate_mm_s;
|
||||
const float seconds = cartesian_mm / _feedrate_mm_s;
|
||||
|
||||
// The number of segments-per-second times the duration
|
||||
// gives the number of segments
|
||||
|
|
@ -11227,7 +11227,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
|
|||
return false;
|
||||
}
|
||||
|
||||
#else // !IS_KINEMATIC
|
||||
#else // !IS_KINEMATIC || UBL_DELTA
|
||||
|
||||
/**
|
||||
* Prepare a linear move in a Cartesian setup.
|
||||
|
|
@ -11265,7 +11265,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
|
|||
return false;
|
||||
}
|
||||
|
||||
#endif // !IS_KINEMATIC
|
||||
#endif // !IS_KINEMATIC || UBL_DELTA
|
||||
|
||||
#if ENABLED(DUAL_X_CARRIAGE)
|
||||
|
||||
|
|
@ -11377,21 +11377,21 @@ void prepare_move_to_destination() {
|
|||
|
||||
#endif
|
||||
|
||||
if (
|
||||
#if IS_KINEMATIC
|
||||
#if ENABLED(UBL_DELTA)
|
||||
if (ubl_prepare_linear_move_to(destination,feedrate_mm_s)) return;
|
||||
#if UBL_DELTA
|
||||
ubl_prepare_linear_move_to(destination, feedrate_mm_s)
|
||||
#else
|
||||
if (prepare_kinematic_move_to(destination)) return;
|
||||
prepare_kinematic_move_to(destination)
|
||||
#endif
|
||||
#elif ENABLED(DUAL_X_CARRIAGE)
|
||||
prepare_move_to_destination_dualx()
|
||||
#elif UBL_DELTA // will work for CARTESIAN too (smaller segments follow mesh more closely)
|
||||
ubl_prepare_linear_move_to(destination, feedrate_mm_s)
|
||||
#else
|
||||
#if ENABLED(DUAL_X_CARRIAGE)
|
||||
if (prepare_move_to_destination_dualx()) return;
|
||||
#elif ENABLED(UBL_DELTA) // will work for CARTESIAN too (smaller segments follow mesh more closely)
|
||||
if (ubl_prepare_linear_move_to(destination,feedrate_mm_s)) return;
|
||||
#else
|
||||
if (prepare_move_to_destination_cartesian()) return;
|
||||
#endif
|
||||
prepare_move_to_destination_cartesian()
|
||||
#endif
|
||||
) return;
|
||||
|
||||
set_current_to_destination();
|
||||
}
|
||||
|
|
@ -11432,7 +11432,7 @@ void prepare_move_to_destination() {
|
|||
if (angular_travel == 0 && current_position[X_AXIS] == logical[X_AXIS] && current_position[Y_AXIS] == logical[Y_AXIS])
|
||||
angular_travel += RADIANS(360);
|
||||
|
||||
float mm_of_travel = HYPOT(angular_travel * radius, fabs(linear_travel));
|
||||
const float mm_of_travel = HYPOT(angular_travel * radius, fabs(linear_travel));
|
||||
if (mm_of_travel < 0.001) return;
|
||||
|
||||
uint16_t segments = floor(mm_of_travel / (MM_PER_ARC_SEGMENT));
|
||||
|
|
|
|||
|
|
@ -248,11 +248,9 @@
|
|||
#if ENABLED(DELTA)
|
||||
#if DISABLED(USE_XMAX_PLUG) && DISABLED(USE_YMAX_PLUG) && DISABLED(USE_ZMAX_PLUG)
|
||||
#error "You probably want to use Max Endstops for DELTA!"
|
||||
#endif
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(UBL_DELTA)
|
||||
#error "ENABLE_LEVELING_FADE_HEIGHT for DELTA requires UBL_DELTA and AUTO_BED_LEVELING_UBL."
|
||||
#endif
|
||||
#if ABL_GRID
|
||||
#elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_DELTA
|
||||
#error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
|
||||
#elif ABL_GRID
|
||||
#if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0
|
||||
#error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers."
|
||||
#elif GRID_MAX_POINTS_X < 3
|
||||
|
|
@ -431,20 +429,11 @@ static_assert(1 >= 0
|
|||
* Unified Bed Leveling
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if IS_KINEMATIC
|
||||
#if ENABLED(DELTA)
|
||||
#if DISABLED(UBL_DELTA)
|
||||
#error "AUTO_BED_LEVELING_UBL requires UBL_DELTA for DELTA printers."
|
||||
#endif
|
||||
#else // SCARA
|
||||
#error "AUTO_BED_LEVELING_UBL not supported for SCARA printers."
|
||||
#endif
|
||||
#endif
|
||||
#if DISABLED(NEWPANEL)
|
||||
#if IS_SCARA
|
||||
#error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers."
|
||||
#elif DISABLED(NEWPANEL)
|
||||
#error "AUTO_BED_LEVELING_UBL requires an LCD controller."
|
||||
#endif
|
||||
#elif ENABLED(UBL_DELTA)
|
||||
#error "UBL_DELTA requires AUTO_BED_LEVELING_UBL."
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -603,10 +592,8 @@ static_assert(1 >= 0
|
|||
/**
|
||||
* Delta and SCARA have limited bed leveling options
|
||||
*/
|
||||
#if IS_KINEMATIC
|
||||
#if DISABLED(AUTO_BED_LEVELING_BILINEAR) && DISABLED(UBL_DELTA)
|
||||
#error "Only AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL with UBL_DELTA support DELTA and SCARA bed leveling."
|
||||
#endif
|
||||
#if IS_SCARA && DISABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#error "Only AUTO_BED_LEVELING_BILINEAR currently supports SCARA bed leveling."
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -342,7 +342,7 @@ void MarlinSettings::postprocess() {
|
|||
#if ENABLED(MESH_BED_LEVELING)
|
||||
// Compile time test that sizeof(mbl.z_values) is as expected
|
||||
static_assert(
|
||||
sizeof(mbl.z_values) == (GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y) * sizeof(mbl.z_values[0][0]),
|
||||
sizeof(mbl.z_values) == GRID_MAX_POINTS * sizeof(mbl.z_values[0][0]),
|
||||
"MBL Z array is the wrong size."
|
||||
);
|
||||
const bool leveling_is_on = TEST(mbl.status, MBL_STATUS_HAS_MESH_BIT);
|
||||
|
|
@ -386,7 +386,7 @@ void MarlinSettings::postprocess() {
|
|||
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
// Compile time test that sizeof(z_values) is as expected
|
||||
static_assert(
|
||||
sizeof(z_values) == (GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y) * sizeof(z_values[0][0]),
|
||||
sizeof(z_values) == GRID_MAX_POINTS * sizeof(z_values[0][0]),
|
||||
"Bilinear Z array is the wrong size."
|
||||
);
|
||||
const uint8_t grid_max_x = GRID_MAX_POINTS_X, grid_max_y = GRID_MAX_POINTS_Y;
|
||||
|
|
|
|||
|
|
@ -534,12 +534,12 @@ void Planner::check_axes_activity() {
|
|||
*/
|
||||
void Planner::apply_leveling(float &lx, float &ly, float &lz) {
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(UBL_DELTA) // probably should also be enabled for UBL without UBL_DELTA
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL) && UBL_DELTA // probably should also be enabled for UBL without UBL_DELTA
|
||||
if (!ubl.state.active) return;
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
// if z_fade_height enabled (nonzero) and raw_z above it, no leveling required
|
||||
if ((planner.z_fade_height) && (planner.z_fade_height <= RAW_Z_POSITION(lz))) return;
|
||||
lz += ubl.state.z_offset + ( ubl.get_z_correction(lx,ly) * ubl.fade_scaling_factor_for_z(lz));
|
||||
lz += ubl.state.z_offset + ubl.get_z_correction(lx,ly) * ubl.fade_scaling_factor_for_z(lz);
|
||||
#else // no fade
|
||||
lz += ubl.state.z_offset + ubl.get_z_correction(lx,ly);
|
||||
#endif // FADE
|
||||
|
|
@ -598,12 +598,12 @@ void Planner::check_axes_activity() {
|
|||
|
||||
void Planner::unapply_leveling(float logical[XYZ]) {
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(UBL_DELTA)
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL) && UBL_DELTA
|
||||
|
||||
if (ubl.state.active) {
|
||||
|
||||
float z_leveled = RAW_Z_POSITION(logical[Z_AXIS]);
|
||||
float z_ublmesh = ubl.get_z_correction(logical[X_AXIS],logical[Y_AXIS]);
|
||||
const float z_leveled = RAW_Z_POSITION(logical[Z_AXIS]),
|
||||
z_ublmesh = ubl.get_z_correction(logical[X_AXIS], logical[Y_AXIS]);
|
||||
float z_unlevel = z_leveled - ubl.state.z_offset - z_ublmesh;
|
||||
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
|
|
@ -617,7 +617,7 @@ void Planner::check_axes_activity() {
|
|||
// so U==(L-O-M)/(1-M/H) for U<H
|
||||
|
||||
if (planner.z_fade_height) {
|
||||
float z_unfaded = z_unlevel / ( 1.0 - ( z_ublmesh * planner.inverse_z_fade_height ));
|
||||
float z_unfaded = z_unlevel / (1.0 - z_ublmesh * planner.inverse_z_fade_height);
|
||||
if (z_unfaded < planner.z_fade_height) // don't know until after compute
|
||||
z_unlevel = z_unfaded;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -209,7 +209,7 @@
|
|||
* Mesh Validation Pattern phase. Please note that you are populating your mesh with unverified
|
||||
* numbers. You should use some scrutiny and caution.
|
||||
*
|
||||
* P4 Phase 4 Fine tune the Mesh. The Delta Mesh Compensation System assume the existance of
|
||||
* P4 Phase 4 Fine tune the Mesh. The Delta Mesh Compensation System assume the existence of
|
||||
* an LCD Panel. It is possible to fine tune the mesh without the use of an LCD Panel.
|
||||
* (More work and details on doing this later!)
|
||||
* The System will search for the closest Mesh Point to the nozzle. It will move the
|
||||
|
|
@ -328,7 +328,8 @@
|
|||
return;
|
||||
}
|
||||
|
||||
if (!code_seen('N') && axis_unhomed_error(true, true, true)) // Don't allow auto-leveling without homing first
|
||||
// Don't allow auto-leveling without homing first
|
||||
if (!code_seen('N') && axis_unhomed_error(true, true, true)) // Warning! Use of 'N' flouts established standards.
|
||||
home_all_axes();
|
||||
|
||||
if (g29_parameter_parsing()) return; // abort if parsing the simple parameters causes a problem,
|
||||
|
|
@ -385,7 +386,7 @@
|
|||
|
||||
if (code_seen('J')) {
|
||||
ubl.save_ubl_active_state_and_disable();
|
||||
ubl.tilt_mesh_based_on_probed_grid(code_seen('O') || code_seen('M'));
|
||||
ubl.tilt_mesh_based_on_probed_grid(code_seen('O') || code_seen('M')); // Warning! Use of 'M' flouts established standards.
|
||||
ubl.restore_ubl_active_state_and_leave();
|
||||
}
|
||||
|
||||
|
|
@ -419,7 +420,7 @@
|
|||
SERIAL_PROTOCOLLNPGM(").\n");
|
||||
}
|
||||
ubl.probe_entire_mesh(x_pos + X_PROBE_OFFSET_FROM_EXTRUDER, y_pos + Y_PROBE_OFFSET_FROM_EXTRUDER,
|
||||
code_seen('O') || code_seen('M'), code_seen('E'), code_seen('U'));
|
||||
code_seen('O') || code_seen('M'), code_seen('E'), code_seen('U')); // Warning! Use of 'M' flouts established standards.
|
||||
break;
|
||||
|
||||
case 2: {
|
||||
|
|
@ -468,7 +469,7 @@
|
|||
return;
|
||||
}
|
||||
|
||||
manually_probe_remaining_mesh(x_pos, y_pos, height, card_thickness, code_seen('O') || code_seen('M'));
|
||||
manually_probe_remaining_mesh(x_pos, y_pos, height, card_thickness, code_seen('O') || code_seen('M')); // Warning! Use of 'M' flouts established standards.
|
||||
SERIAL_PROTOCOLLNPGM("G29 P2 finished.");
|
||||
} break;
|
||||
|
||||
|
|
@ -504,7 +505,7 @@
|
|||
//
|
||||
// Fine Tune (i.e., Edit) the Mesh
|
||||
//
|
||||
fine_tune_mesh(x_pos, y_pos, code_seen('O') || code_seen('M'));
|
||||
fine_tune_mesh(x_pos, y_pos, code_seen('O') || code_seen('M')); // Warning! Use of 'M' flouts established standards.
|
||||
break;
|
||||
|
||||
case 5: ubl.find_mean_mesh_height(); break;
|
||||
|
|
@ -549,7 +550,7 @@
|
|||
// When we are fully debugged, the EEPROM dump command will get deleted also. But
|
||||
// right now, it is good to have the extra information. Soon... we prune this.
|
||||
//
|
||||
if (code_seen('j')) g29_eeprom_dump(); // EEPROM Dump
|
||||
if (code_seen('j')) g29_eeprom_dump(); // Warning! Use of lowercase flouts established standards.
|
||||
|
||||
//
|
||||
// When we are fully debugged, this may go away. But there are some valid
|
||||
|
|
@ -613,7 +614,7 @@
|
|||
SERIAL_PROTOCOLLNPGM("Done.\n");
|
||||
}
|
||||
|
||||
if (code_seen('O') || code_seen('M'))
|
||||
if (code_seen('O') || code_seen('M')) // Warning! Use of 'M' flouts established standards.
|
||||
ubl.display_map(code_has_value() ? code_value_int() : 0);
|
||||
|
||||
if (code_seen('Z')) {
|
||||
|
|
@ -1048,8 +1049,8 @@
|
|||
|
||||
repeat_flag = code_seen('R');
|
||||
if (repeat_flag) {
|
||||
repetition_cnt = code_has_value() ? code_value_int() : (GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y);
|
||||
repetition_cnt = min(repetition_cnt, (GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y));
|
||||
repetition_cnt = code_has_value() ? code_value_int() : GRID_MAX_POINTS;
|
||||
NOMORE(repetition_cnt, GRID_MAX_POINTS);
|
||||
if (repetition_cnt < 1) {
|
||||
SERIAL_PROTOCOLLNPGM("?(R)epetition count invalid (1+).\n");
|
||||
return UBL_ERR;
|
||||
|
|
@ -1128,8 +1129,8 @@
|
|||
SERIAL_PROTOCOLLNPGM("Invalid map type.\n");
|
||||
return UBL_ERR;
|
||||
}
|
||||
|
||||
if (code_seen('M')) { // Check if a map type was specified
|
||||
// Check if a map type was specified
|
||||
if (code_seen('M')) { // Warning! Use of 'M' flouts established standards.
|
||||
map_type = code_has_value() ? code_value_int() : 0;
|
||||
if (!WITHIN(map_type, 0, 1)) {
|
||||
SERIAL_PROTOCOLLNPGM("Invalid map type.\n");
|
||||
|
|
|
|||
|
|
@ -474,20 +474,10 @@
|
|||
set_current_to_destination();
|
||||
}
|
||||
|
||||
|
||||
#ifdef UBL_DELTA
|
||||
|
||||
#define COPY_XYZE( target, source ) { \
|
||||
target[X_AXIS] = source[X_AXIS]; \
|
||||
target[Y_AXIS] = source[Y_AXIS]; \
|
||||
target[Z_AXIS] = source[Z_AXIS]; \
|
||||
target[E_AXIS] = source[E_AXIS]; \
|
||||
}
|
||||
#if UBL_DELTA
|
||||
|
||||
#if IS_SCARA // scale the feed rate from mm/s to degrees/s
|
||||
static float scara_feed_factor;
|
||||
static float scara_oldA;
|
||||
static float scara_oldB;
|
||||
static float scara_feed_factor, scara_oldA, scara_oldB;
|
||||
#endif
|
||||
|
||||
// We don't want additional apply_leveling() performed by regular buffer_line or buffer_line_kinematic,
|
||||
|
|
@ -501,8 +491,8 @@
|
|||
float feedrate = fr_mm_s;
|
||||
|
||||
#if IS_SCARA // scale the feed rate from mm/s to degrees/s
|
||||
float adiff = abs(delta[A_AXIS] - scara_oldA);
|
||||
float bdiff = abs(delta[B_AXIS] - scara_oldB);
|
||||
float adiff = abs(delta[A_AXIS] - scara_oldA),
|
||||
bdiff = abs(delta[B_AXIS] - scara_oldB);
|
||||
scara_oldA = delta[A_AXIS];
|
||||
scara_oldB = delta[B_AXIS];
|
||||
feedrate = max(adiff, bdiff) * scara_feed_factor;
|
||||
|
|
@ -535,19 +525,19 @@
|
|||
ltarget[E_AXIS] - current_position[E_AXIS]
|
||||
};
|
||||
|
||||
float cartesian_xy_mm = sqrtf( sq(difference[X_AXIS]) + sq(difference[Y_AXIS]) ); // total horizontal xy distance
|
||||
const float cartesian_xy_mm = HYPOT(difference[X_AXIS], difference[Y_AXIS]); // total horizontal xy distance
|
||||
|
||||
#if IS_KINEMATIC
|
||||
float seconds = cartesian_xy_mm / feedrate; // seconds to move xy distance at requested rate
|
||||
uint16_t segments = lroundf( delta_segments_per_second * seconds ); // preferred number of segments for distance @ feedrate
|
||||
uint16_t seglimit = lroundf( cartesian_xy_mm * (1.0/(DELTA_SEGMENT_MIN_LENGTH))); // number of segments at minimum segment length
|
||||
const float seconds = cartesian_xy_mm / feedrate; // seconds to move xy distance at requested rate
|
||||
uint16_t segments = lroundf(delta_segments_per_second * seconds), // preferred number of segments for distance @ feedrate
|
||||
seglimit = lroundf(cartesian_xy_mm * (1.0 / (DELTA_SEGMENT_MIN_LENGTH))); // number of segments at minimum segment length
|
||||
NOMORE(segments, seglimit); // limit to minimum segment length (fewer segments)
|
||||
#else
|
||||
uint16_t segments = lroundf(cartesian_xy_mm * (1.0 / (DELTA_SEGMENT_MIN_LENGTH))); // cartesian fixed segment length
|
||||
#endif
|
||||
|
||||
NOLESS(segments, 1); // must have at least one segment
|
||||
float inv_segments = 1.0 / segments; // divide once, multiply thereafter
|
||||
const float inv_segments = 1.0 / segments; // divide once, multiply thereafter
|
||||
|
||||
#if IS_SCARA // scale the feed rate from mm/s to degrees/s
|
||||
scara_feed_factor = cartesian_xy_mm * inv_segments * feedrate;
|
||||
|
|
@ -565,22 +555,22 @@
|
|||
// Note that E segment distance could vary slightly as z mesh height
|
||||
// changes for each segment, but small enough to ignore.
|
||||
|
||||
bool above_fade_height = false;
|
||||
const bool above_fade_height = (
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
if (( planner.z_fade_height != 0 ) &&
|
||||
( planner.z_fade_height < RAW_Z_POSITION(ltarget[Z_AXIS]) )) {
|
||||
above_fade_height = true;
|
||||
}
|
||||
planner.z_fade_height != 0 && planner.z_fade_height < RAW_Z_POSITION(ltarget[Z_AXIS])
|
||||
#else
|
||||
false
|
||||
#endif
|
||||
);
|
||||
|
||||
// Only compute leveling per segment if ubl active and target below z_fade_height.
|
||||
|
||||
if (( ! ubl.state.active ) || ( above_fade_height )) { // no mesh leveling
|
||||
if (!ubl.state.active || above_fade_height) { // no mesh leveling
|
||||
|
||||
const float z_offset = ubl.state.active ? ubl.state.z_offset : 0.0;
|
||||
|
||||
float seg_dest[XYZE]; // per-segment destination,
|
||||
COPY_XYZE( seg_dest, current_position ); // starting from current position
|
||||
COPY(seg_dest, current_position); // starting from current position
|
||||
|
||||
while (--segments) {
|
||||
LOOP_XYZE(i) seg_dest[i] += segment_distance[i];
|
||||
|
|
@ -591,7 +581,7 @@
|
|||
}
|
||||
|
||||
// Since repeated adding segment_distance accumulates small errors, final move to exact destination.
|
||||
COPY_XYZE( seg_dest, ltarget );
|
||||
COPY(seg_dest, ltarget);
|
||||
seg_dest[Z_AXIS] += z_offset;
|
||||
ubl_buffer_line_segment(seg_dest, feedrate, active_extruder);
|
||||
return false; // moved but did not set_current_to_destination();
|
||||
|
|
@ -599,18 +589,14 @@
|
|||
|
||||
// Otherwise perform per-segment leveling
|
||||
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
float fade_scaling_factor = ubl.fade_scaling_factor_for_z(ltarget[Z_AXIS]);
|
||||
#endif
|
||||
|
||||
float seg_dest[XYZE]; // per-segment destination, initialize to first segment
|
||||
LOOP_XYZE(i) seg_dest[i] = current_position[i] + segment_distance[i];
|
||||
|
||||
const float& dx_seg = segment_distance[X_AXIS]; // alias for clarity
|
||||
const float& dy_seg = segment_distance[Y_AXIS];
|
||||
|
||||
float rx = RAW_X_POSITION(seg_dest[X_AXIS]); // assume raw vs logical coordinates shifted but not scaled.
|
||||
float ry = RAW_Y_POSITION(seg_dest[Y_AXIS]);
|
||||
float rx = RAW_X_POSITION(seg_dest[X_AXIS]), // assume raw vs logical coordinates shifted but not scaled.
|
||||
ry = RAW_Y_POSITION(seg_dest[Y_AXIS]);
|
||||
|
||||
do { // for each mesh cell encountered during the move
|
||||
|
||||
|
|
@ -621,10 +607,10 @@
|
|||
// in top of loop and again re-find same adjacent cell and use it, just less efficient
|
||||
// for mesh inset area.
|
||||
|
||||
int8_t cell_xi = (rx - (UBL_MESH_MIN_X)) * (1.0 / (MESH_X_DIST));
|
||||
cell_xi = constrain( cell_xi, 0, (GRID_MAX_POINTS_X) - 1 );
|
||||
int8_t cell_xi = (rx - (UBL_MESH_MIN_X)) * (1.0 / (MESH_X_DIST)),
|
||||
cell_yi = (ry - (UBL_MESH_MIN_Y)) * (1.0 / (MESH_X_DIST));
|
||||
|
||||
int8_t cell_yi = (ry - (UBL_MESH_MIN_Y)) * (1.0 / (MESH_X_DIST));
|
||||
cell_xi = constrain(cell_xi, 0, (GRID_MAX_POINTS_X) - 1);
|
||||
cell_yi = constrain(cell_yi, 0, (GRID_MAX_POINTS_Y) - 1);
|
||||
|
||||
// float x0 = (UBL_MESH_MIN_X) + ((MESH_X_DIST) * cell_xi ); // lower left cell corner
|
||||
|
|
@ -632,53 +618,54 @@
|
|||
// float x1 = x0 + MESH_X_DIST; // upper right cell corner
|
||||
// float y1 = y0 + MESH_Y_DIST; // upper right cell corner
|
||||
|
||||
float x0 = pgm_read_float(&(ubl.mesh_index_to_xpos[cell_xi ])); // 64 byte table lookup avoids mul+add
|
||||
float y0 = pgm_read_float(&(ubl.mesh_index_to_ypos[cell_yi ])); // 64 byte table lookup avoids mul+add
|
||||
float x1 = pgm_read_float(&(ubl.mesh_index_to_xpos[cell_xi+1])); // 64 byte table lookup avoids mul+add
|
||||
float y1 = pgm_read_float(&(ubl.mesh_index_to_ypos[cell_yi+1])); // 64 byte table lookup avoids mul+add
|
||||
const float x0 = pgm_read_float(&(ubl.mesh_index_to_xpos[cell_xi ])), // 64 byte table lookup avoids mul+add
|
||||
y0 = pgm_read_float(&(ubl.mesh_index_to_ypos[cell_yi ])), // 64 byte table lookup avoids mul+add
|
||||
x1 = pgm_read_float(&(ubl.mesh_index_to_xpos[cell_xi+1])), // 64 byte table lookup avoids mul+add
|
||||
y1 = pgm_read_float(&(ubl.mesh_index_to_ypos[cell_yi+1])), // 64 byte table lookup avoids mul+add
|
||||
|
||||
float cx = rx - x0; // cell-relative x
|
||||
float cy = ry - y0; // cell-relative y
|
||||
cx = rx - x0, // cell-relative x
|
||||
cy = ry - y0; // cell-relative y
|
||||
|
||||
float z_x0y0 = ubl.z_values[cell_xi ][cell_yi ]; // z at lower left corner
|
||||
float z_x1y0 = ubl.z_values[cell_xi+1][cell_yi ]; // z at upper left corner
|
||||
float z_x0y1 = ubl.z_values[cell_xi ][cell_yi+1]; // z at lower right corner
|
||||
float z_x1y1 = ubl.z_values[cell_xi+1][cell_yi+1]; // z at upper right corner
|
||||
float z_x0y0 = ubl.z_values[cell_xi ][cell_yi ], // z at lower left corner
|
||||
z_x1y0 = ubl.z_values[cell_xi+1][cell_yi ], // z at upper left corner
|
||||
z_x0y1 = ubl.z_values[cell_xi ][cell_yi+1], // z at lower right corner
|
||||
z_x1y1 = ubl.z_values[cell_xi+1][cell_yi+1]; // z at upper right corner
|
||||
|
||||
if (isnan(z_x0y0)) z_x0y0 = 0; // ideally activating ubl.state.active (G29 A)
|
||||
if (isnan(z_x1y0)) z_x1y0 = 0; // should refuse if any invalid mesh points
|
||||
if (isnan(z_x0y1)) z_x0y1 = 0; // in order to avoid isnan tests per cell,
|
||||
if (isnan(z_x1y1)) z_x1y1 = 0; // thus guessing zero for undefined points
|
||||
|
||||
float z_xmy0 = (z_x1y0 - z_x0y0) * (1.0/MESH_X_DIST); // z slope per x along y0 (lower left to lower right)
|
||||
float z_xmy1 = (z_x1y1 - z_x0y1) * (1.0/MESH_X_DIST); // z slope per x along y1 (upper left to upper right)
|
||||
const float z_xmy0 = (z_x1y0 - z_x0y0) * (1.0 / (MESH_X_DIST)), // z slope per x along y0 (lower left to lower right)
|
||||
z_xmy1 = (z_x1y1 - z_x0y1) * (1.0 / (MESH_X_DIST)); // z slope per x along y1 (upper left to upper right)
|
||||
|
||||
float z_cxy0 = z_x0y0 + z_xmy0 * cx; // z height along y0 at cx
|
||||
float z_cxy1 = z_x0y1 + z_xmy1 * cx; // z height along y1 at cx
|
||||
float z_cxyd = z_cxy1 - z_cxy0; // z height difference along cx from y0 to y1
|
||||
|
||||
float z_cxym = z_cxyd * (1.0/MESH_Y_DIST); // z slope per y along cx from y0 to y1
|
||||
float z_cxcy = z_cxy0 + z_cxym * cy; // z height along cx at cy
|
||||
const float z_cxy1 = z_x0y1 + z_xmy1 * cx, // z height along y1 at cx
|
||||
z_cxyd = z_cxy1 - z_cxy0; // z height difference along cx from y0 to y1
|
||||
|
||||
float z_cxym = z_cxyd * (1.0 / (MESH_Y_DIST)), // z slope per y along cx from y0 to y1
|
||||
z_cxcy = z_cxy0 + z_cxym * cy; // z height along cx at cy
|
||||
|
||||
// As subsequent segments step through this cell, the z_cxy0 intercept will change
|
||||
// and the z_cxym slope will change, both as a function of cx within the cell, and
|
||||
// each change by a constant for fixed segment lengths.
|
||||
|
||||
float z_sxy0 = z_xmy0 * dx_seg; // per-segment adjustment to z_cxy0
|
||||
float z_sxym = ( z_xmy1 - z_xmy0 ) * (1.0/MESH_Y_DIST) * dx_seg; // per-segment adjustment to z_cxym
|
||||
const float z_sxy0 = z_xmy0 * dx_seg, // per-segment adjustment to z_cxy0
|
||||
z_sxym = (z_xmy1 - z_xmy0) * (1.0 / (MESH_Y_DIST)) * dx_seg; // per-segment adjustment to z_cxym
|
||||
|
||||
do { // for all segments within this mesh cell
|
||||
|
||||
z_cxcy += ubl.state.z_offset;
|
||||
|
||||
if (--segments == 0) { // this is last segment, use ltarget for exact
|
||||
COPY_XYZE( seg_dest, ltarget );
|
||||
COPY(seg_dest, ltarget);
|
||||
seg_dest[Z_AXIS] += z_cxcy;
|
||||
ubl_buffer_line_segment(seg_dest, feedrate, active_extruder);
|
||||
return false; // did not set_current_to_destination()
|
||||
}
|
||||
|
||||
float z_orig = seg_dest[Z_AXIS]; // remember the pre-leveled segment z value
|
||||
const float z_orig = seg_dest[Z_AXIS]; // remember the pre-leveled segment z value
|
||||
seg_dest[Z_AXIS] = z_orig + z_cxcy; // adjust segment z height per mesh leveling
|
||||
ubl_buffer_line_segment(seg_dest, feedrate, active_extruder);
|
||||
seg_dest[Z_AXIS] = z_orig; // restore pre-leveled z before incrementing
|
||||
|
|
|
|||
|
|
@ -1430,17 +1430,13 @@ void kill_screen(const char* lcd_msg) {
|
|||
#endif
|
||||
|
||||
// LCD probed points are from defaults
|
||||
constexpr uint8_t total_probe_points =
|
||||
#if ABL_GRID
|
||||
(GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y)
|
||||
#elif ENABLED(AUTO_BED_LEVELING_3POINT)
|
||||
int(3)
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
(GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y)
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
(GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y)
|
||||
constexpr uint8_t total_probe_points = (
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT)
|
||||
3
|
||||
#elif ABL_GRID || ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(MESH_BED_LEVELING)
|
||||
GRID_MAX_POINTS
|
||||
#endif
|
||||
;
|
||||
);
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
|
|
|
|||
|
|
@ -16,12 +16,6 @@ if [[ $ORG != "MarlinFirmware" || $REPO != "MarlinDocumentation" ]]; then
|
|||
exit
|
||||
fi
|
||||
|
||||
if [[ $BRANCH != "master" ]]; then
|
||||
echo "Stashing changes and changing to master."
|
||||
git stash
|
||||
git checkout master
|
||||
fi
|
||||
|
||||
opensite() {
|
||||
TOOL=$(which gnome-open xdg-open open | awk '{ print $1 }')
|
||||
URL="http://127.0.0.1:4000/"
|
||||
|
|
@ -40,9 +34,3 @@ echo "Previewing MarlinDocumentation..."
|
|||
( sleep 45; opensite ) &
|
||||
|
||||
bundle exec jekyll serve --watch --incremental
|
||||
|
||||
if [[ $BRANCH != "master" ]]; then
|
||||
echo "Restoring branch '$BRANCH'"
|
||||
git checkout $BRANCH
|
||||
git stash pop
|
||||
fi
|
||||
|
|
|
|||
|
|
@ -30,26 +30,25 @@ if [[ $BRANCH == "gh-pages" ]]; then
|
|||
exit
|
||||
fi
|
||||
|
||||
if [[ $BRANCH != "master" ]]; then
|
||||
echo "Stashing any changes to files..."
|
||||
echo "Don't forget to update and push 'master'!"
|
||||
# GOJF Card
|
||||
git stash
|
||||
fi
|
||||
|
||||
COMMIT=$( git log --format="%H" -n 1 )
|
||||
|
||||
# Clean out changes and other junk in the branch
|
||||
git reset --hard
|
||||
git clean -d -f
|
||||
|
||||
# Push 'master' to the fork and make a proper PR...
|
||||
if [[ $BRANCH == "master" ]]; then
|
||||
|
||||
# Allow working directly with the main fork
|
||||
echo
|
||||
echo -n "Pushing to origin/master... "
|
||||
git push -f origin
|
||||
|
||||
echo
|
||||
echo -n "Pushing to upstream/master... "
|
||||
git push -f upstream
|
||||
|
||||
|
|
@ -58,6 +57,7 @@ else
|
|||
if [ -z "$(git branch -vv | grep ^\* | grep \\[origin)" ]; then
|
||||
firstpush
|
||||
else
|
||||
echo
|
||||
echo -n "Pushing to origin/$BRANCH... "
|
||||
git push -f origin
|
||||
fi
|
||||
|
|
@ -79,6 +79,7 @@ fi
|
|||
# mv ./_plugins/jekyll-press.rb-disabled ./_plugins/jekyll-press.rb
|
||||
# bundle install
|
||||
|
||||
echo
|
||||
echo "Generating MarlinDocumentation..."
|
||||
|
||||
# build the site statically and proof it
|
||||
|
|
|
|||
Loading…
Reference in a new issue