⏪️ Revert encoder changes

Reverts #26501

Marlin/src/lcd/marlinui.cpp

@@ -67,8 +67,6 @@ MarlinUI ui;
 
 constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
 
-#define BLOCK_CLICK_AFTER_MOVEMENT_MS 100
-
 #if HAS_STATUS_MESSAGE
   #if ENABLED(STATUS_MESSAGE_SCROLLING) && ANY(HAS_WIRED_LCD, DWIN_LCD_PROUI)
     uint8_t MarlinUI::status_scroll_offset; // = 0
@@ -942,7 +940,6 @@ void MarlinUI::init() {
   void MarlinUI::update() {
 
     static uint16_t max_display_update_time = 0;
-    static millis_t next_encoder_enable_ms = 0;
     const millis_t ms = millis();
 
     #if LED_POWEROFF_TIMEOUT > 0
@@ -993,12 +990,7 @@ void MarlinUI::init() {
       if (!touch_buttons) {
         // Integrated LCD click handling via button_pressed
         if (!external_control && button_pressed()) {
-          if (!wait_for_unclick) {
+          if (!wait_for_unclick) do_click();              // Handle the click
-            if (ELAPSED(ms, next_encoder_enable_ms))
-              do_click();              // Handle the click
-            else
-              wait_for_unclick = true;
-          }
         }
         else
           wait_for_unclick = false;
@@ -1035,73 +1027,68 @@ void MarlinUI::init() {
         uint8_t abs_diff = ABS(encoderDiff);
 
         #if ENCODER_PULSES_PER_STEP > 1
-          #if HAS_TOUCH_SLEEP
+          // When reversing the encoder direction, a movement step can be missed because
-            static int8_t lastEncoderDiff;
+          // encoderDiff has a non-zero residual value, making the controller unresponsive.
-            if (lastEncoderDiff != encoderDiff) {
+          // The fix clears the residual value when the encoder is idle.
-              wakeup_screen();
+          // Also check if past half the threshold to compensate for missed single steps.
-              lastEncoderDiff = encoderDiff;
+          static int8_t lastEncoderDiff;
-            }
+
-          #endif
+          // Timeout? No decoder change since last check. 10 or 20 times per second.
+          if (encoderDiff == lastEncoderDiff && abs_diff <= epps / 2)   // Same direction & size but not over a half-step?
+            encoderDiff = 0;                                            // Clear residual pulses.
+          else if (WITHIN(abs_diff, epps / 2 + 1, epps - 1)) {          // Past half of threshold?
+            abs_diff = epps;                                            // Treat as a full step size
+            encoderDiff = (encoderDiff < 0 ? -1 : 1) * abs_diff;        // ...in the spin direction.
+          }
+          TERN_(HAS_TOUCH_SLEEP, if (lastEncoderDiff != encoderDiff) wakeup_screen());
+          lastEncoderDiff = encoderDiff;
         #endif
 
         const bool encoderPastThreshold = (abs_diff >= epps);
-        if (encoderPastThreshold && TERN1(IS_TFTGLCD_PANEL, !external_control)) {
-
-          #if ALL(HAS_MARLINUI_MENU, ENCODER_RATE_MULTIPLIER)
-
-            int32_t encoderMultiplier = 1;
-
-            if (encoderRateMultiplierEnabled) {
-              if (lastEncoderMovementMillis) {
-                const float encoderMovementSteps = float(abs_diff) / epps;
-                // Note that the rate is always calculated between two passes through the
-                // loop and that the abs of the encoderDiff value is tracked.
-                const float encoderStepRate = encoderMovementSteps / float(ms - lastEncoderMovementMillis) * 1000;
-
-                if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC)     encoderMultiplier = 100;
-                else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
-
-                // Enable to output the encoder steps per second value
-                //#define ENCODER_RATE_MULTIPLIER_DEBUG
-                #if ENABLED(ENCODER_RATE_MULTIPLIER_DEBUG)
-                  SERIAL_ECHO_START();
-                  SERIAL_ECHOPGM("Enc Step Rate: ", encoderStepRate);
-                  SERIAL_ECHOPGM("  Multiplier: ", encoderMultiplier);
-                  SERIAL_ECHOPGM("  ENCODER_10X_STEPS_PER_SEC: ", ENCODER_10X_STEPS_PER_SEC);
-                  SERIAL_ECHOPGM("  ENCODER_100X_STEPS_PER_SEC: ", ENCODER_100X_STEPS_PER_SEC);
-                  SERIAL_EOL();
-                #endif
-              }
-
-              lastEncoderMovementMillis = ms;
-            } // encoderRateMultiplierEnabled
-
-          #else
-
-            constexpr int32_t encoderMultiplier = 1;
-
-          #endif // ENCODER_RATE_MULTIPLIER
-
-          int8_t fullSteps = encoderDiff / epps;
-          if (fullSteps != 0) {
-
-            #if ENABLED(ENCODER_RATE_MULTIPLIER)
-              static bool lastFwd;
-              const bool fwd = fullSteps > 0;
-              if (encoderMultiplier != 1 && fwd != lastFwd)
-                fullSteps *= -1;  // Fast move and direction changed? Assume glitch.
-              else
-                lastFwd = fwd;    // Slow move or lastFwd==fwd already. Remember dir.
-            #endif
-
-            next_encoder_enable_ms = ms + BLOCK_CLICK_AFTER_MOVEMENT_MS;
-            encoderDiff -= fullSteps * epps;
-            if (can_encode() && !lcd_clicked)
-              encoderPosition += (fullSteps * encoderMultiplier);
-          }
-        }
-
         if (encoderPastThreshold || lcd_clicked) {
+          if (encoderPastThreshold && TERN1(IS_TFTGLCD_PANEL, !external_control)) {
+
+            #if ALL(HAS_MARLINUI_MENU, ENCODER_RATE_MULTIPLIER)
+
+              int32_t encoderMultiplier = 1;
+
+              if (encoderRateMultiplierEnabled) {
+                const float encoderMovementSteps = float(abs_diff) / epps;
+
+                if (lastEncoderMovementMillis) {
+                  // Note that the rate is always calculated between two passes through the
+                  // loop and that the abs of the encoderDiff value is tracked.
+                  const float encoderStepRate = encoderMovementSteps / float(ms - lastEncoderMovementMillis) * 1000;
+
+                  if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC)     encoderMultiplier = 100;
+                  else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
+
+                  // Enable to output the encoder steps per second value
+                  //#define ENCODER_RATE_MULTIPLIER_DEBUG
+                  #if ENABLED(ENCODER_RATE_MULTIPLIER_DEBUG)
+                    SERIAL_ECHO_START();
+                    SERIAL_ECHOPGM("Enc Step Rate: ", encoderStepRate);
+                    SERIAL_ECHOPGM("  Multiplier: ", encoderMultiplier);
+                    SERIAL_ECHOPGM("  ENCODER_10X_STEPS_PER_SEC: ", ENCODER_10X_STEPS_PER_SEC);
+                    SERIAL_ECHOPGM("  ENCODER_100X_STEPS_PER_SEC: ", ENCODER_100X_STEPS_PER_SEC);
+                    SERIAL_EOL();
+                  #endif
+                }
+
+                lastEncoderMovementMillis = ms;
+              } // encoderRateMultiplierEnabled
+
+            #else
+
+              constexpr int32_t encoderMultiplier = 1;
+
+            #endif // ENCODER_RATE_MULTIPLIER
+
+            if (can_encode()) encoderPosition += (encoderDiff * encoderMultiplier) / epps;
+
+            encoderDiff = 0;
+          }
+
           reset_status_timeout(ms);
 
           #if HAS_BACKLIGHT_TIMEOUT
@@ -1115,7 +1102,7 @@ void MarlinUI::init() {
           #if LED_POWEROFF_TIMEOUT > 0
             if (!powerManager.psu_on) leds.reset_timeout(ms);
           #endif
-        }
+        } // encoder activity
 
       #endif // HAS_ENCODER_ACTION
 
@@ -1413,10 +1400,9 @@ void MarlinUI::init() {
 
       #if HAS_ENCODER_WHEEL
         static uint8_t lastEncoderBits;
-        bool ignore = false;
 
         // Manage encoder rotation
-        #define ENCODER_SPIN(_E1, _E2) switch (lastEncoderBits) { case _E1: encoderDiff += encoderDirection; break; case _E2: encoderDiff -= encoderDirection; break; default: ignore = true; }
+        #define ENCODER_SPIN(_E1, _E2) switch (lastEncoderBits) { case _E1: encoderDiff += encoderDirection; break; case _E2: encoderDiff -= encoderDirection; }
 
         uint8_t enc = 0;
         if (buttons & EN_A) enc |= B01;
@@ -1431,7 +1417,7 @@ void MarlinUI::init() {
           #if ALL(HAS_MARLINUI_MENU, AUTO_BED_LEVELING_UBL)
             external_encoder();
           #endif
-          if (!ignore) lastEncoderBits = enc;
+          lastEncoderBits = enc;
         }
 
       #endif // HAS_ENCODER_WHEEL