🎨 Misc. tramming menu cleanup (#25519)

Marlin/Configuration.h

@@ -2114,8 +2114,8 @@
 
 #if ENABLED(LCD_BED_TRAMMING)
   #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
-  #define BED_TRAMMING_HEIGHT      0.0        // (mm) Z height of nozzle at leveling points
+  #define BED_TRAMMING_HEIGHT      0.0        // (mm) Z height of nozzle at tramming points
-  #define BED_TRAMMING_Z_HOP       4.0        // (mm) Z height of nozzle between leveling points
+  #define BED_TRAMMING_Z_HOP       4.0        // (mm) Z height of nozzle between tramming points
   //#define BED_TRAMMING_INCLUDE_CENTER       // Move to the center after the last corner
   //#define BED_TRAMMING_USE_PROBE
   #if ENABLED(BED_TRAMMING_USE_PROBE)

Marlin/src/lcd/extui/mks_ui/draw_z_offset_wizard.cpp

@@ -36,7 +36,7 @@
 
 #if HAS_LEVELING
   #include "../../../feature/bedlevel/bedlevel.h"
-  bool leveling_was_active;
+  bool mks_leveling_was_active;
 #endif
 
 extern lv_group_t *g;
@@ -110,7 +110,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
     case ID_M_RETURN:
       probe.offset.z = z_offset_backup;
       SET_SOFT_ENDSTOP_LOOSE(false);
-      TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
+      TERN_(HAS_LEVELING, set_bed_leveling_enabled(mks_leveling_was_active));
       #if HOMING_Z_WITH_PROBE && defined(PROBE_OFFSET_WIZARD_START_Z)
         set_axis_never_homed(Z_AXIS); // On cancel the Z position needs correction
         queue.inject_P(PSTR("G28Z"));
@@ -149,8 +149,8 @@ void lv_draw_z_offset_wizard() {
 
   // Store Bed-Leveling-State and disable
   #if HAS_LEVELING
-    leveling_was_active = planner.leveling_active;
+    mks_leveling_was_active = planner.leveling_active;
-    set_bed_leveling_enabled(leveling_was_active);
+    set_bed_leveling_enabled(mks_leveling_was_active);
   #endif
 
   queue.inject_P(PSTR("G28"));

Marlin/src/lcd/menu/menu.cpp

@@ -48,7 +48,7 @@
 ////////////////////////////////////////////
 
 #if HAS_LEVELING && ANY(LCD_BED_TRAMMING, PROBE_OFFSET_WIZARD, X_AXIS_TWIST_COMPENSATION)
-  bool leveling_was_active; // = false
+  bool menu_leveling_was_active; // = false
 #endif
 #if ANY(PROBE_MANUALLY, MESH_BED_LEVELING, X_AXIS_TWIST_COMPENSATION)
   uint8_t manual_probe_index; // = 0

Marlin/src/lcd/menu/menu.h

@@ -264,7 +264,7 @@ inline void clear_menu_history() { screen_history_depth = 0; }
 #define STICKY_SCREEN(S) []{ ui.defer_status_screen(); ui.goto_screen(S); }
 
 #if HAS_LEVELING && ANY(LCD_BED_TRAMMING, PROBE_OFFSET_WIZARD, X_AXIS_TWIST_COMPENSATION)
-  extern bool leveling_was_active;
+  extern bool menu_leveling_was_active;
 #endif
 
 #if ANY(PROBE_MANUALLY, MESH_BED_LEVELING, X_AXIS_TWIST_COMPENSATION)

Marlin/src/lcd/menu/menu_bed_leveling.cpp

@@ -293,7 +293,7 @@ void menu_bed_leveling() {
   #endif
 
   #if ENABLED(LCD_BED_TRAMMING)
-    SUBMENU(MSG_BED_TRAMMING, _lcd_level_bed_corners);
+    SUBMENU(MSG_BED_TRAMMING, _lcd_bed_tramming);
   #endif
 
   #if ENABLED(EEPROM_SETTINGS)

Marlin/src/lcd/menu/menu_bed_tramming.cpp

@@ -21,7 +21,7 @@
  */
 
 //
-// Level Bed Corners menu
+// Bed Tramming menu
 //
 
 #include "../../inc/MarlinConfigPre.h"
@@ -54,7 +54,7 @@
   #endif
   float last_z;
   int good_points;
-  bool corner_probing_done, wait_for_probe;
+  bool tramming_done, wait_for_probe;
 
   #if HAS_MARLINUI_U8GLIB
     #include "../dogm/marlinui_DOGM.h"
@@ -66,6 +66,11 @@
 
 static_assert(BED_TRAMMING_Z_HOP >= 0, "BED_TRAMMING_Z_HOP must be >= 0. Please update your configuration.");
 
+#define LF 1
+#define RF 2
+#define RB 3
+#define LB 4
+
 #ifndef BED_TRAMMING_LEVELING_ORDER
   #define BED_TRAMMING_LEVELING_ORDER { LF, RF, LB, RB } // Default
   //#define BED_TRAMMING_LEVELING_ORDER { LF, LB, RF  }  // 3 hard-coded points
@@ -75,18 +80,14 @@ static_assert(BED_TRAMMING_Z_HOP >= 0, "BED_TRAMMING_Z_HOP must be >= 0. Please
   //#define BED_TRAMMING_LEVELING_ORDER { LB, RB }       // 3-Point tramming - Front
 #endif
 
-#define LF 1
-#define RF 2
-#define RB 3
-#define LB 4
 constexpr int lco[] = BED_TRAMMING_LEVELING_ORDER;
-constexpr bool level_corners_3_points = COUNT(lco) == 2;
+constexpr bool tramming_3_points = COUNT(lco) == 2;
-static_assert(level_corners_3_points || COUNT(lco) == 4, "BED_TRAMMING_LEVELING_ORDER must have exactly 2 or 4 corners.");
+static_assert(tramming_3_points || COUNT(lco) == 4, "BED_TRAMMING_LEVELING_ORDER must have exactly 2 or 4 corners.");
 
 constexpr int lcodiff = ABS(lco[0] - lco[1]);
 static_assert(COUNT(lco) == 4 || lcodiff == 1 || lcodiff == 3, "The first two BED_TRAMMING_LEVELING_ORDER corners must be on the same edge.");
 
-constexpr int nr_edge_points = level_corners_3_points ? 3 : 4;
+constexpr int nr_edge_points = tramming_3_points ? 3 : 4;
 constexpr int available_points = nr_edge_points + ENABLED(BED_TRAMMING_INCLUDE_CENTER);
 constexpr int center_index = TERN(BED_TRAMMING_INCLUDE_CENTER, available_points - 1, -1);
 constexpr float inset_lfrb[4] = BED_TRAMMING_INSET_LFRB;
@@ -98,9 +99,9 @@ static int8_t bed_corner;
 /**
  * Select next corner coordinates
  */
-static void _lcd_level_bed_corners_get_next_position() {
+static void _lcd_bed_tramming_get_next_position() {
 
-  if (level_corners_3_points) {
+  if (tramming_3_points) {
     if (bed_corner >= available_points) bed_corner = 0; // Above max position -> move back to first corner
     switch (bed_corner) {
       case 0 ... 1:
@@ -141,9 +142,9 @@ static void _lcd_level_bed_corners_get_next_position() {
     else {
       current_position = lf;                       // Left front
       switch (lco[bed_corner]) {
-        case RF: current_position.x = rb.x; break; // Right front
+        case RF: current_position.x = rb.x; break; // Right Front
-        case RB: current_position   = rb;   break; // Right rear
+        case RB: current_position   = rb;   break; // Right Back
-        case LB: current_position.y = rb.y; break; // Left rear
+        case LB: current_position.y = rb.y; break; // Left Back
       }
     }
   }
@@ -198,7 +199,7 @@ static void _lcd_level_bed_corners_get_next_position() {
     if (!ui.should_draw()) return;
     MenuItem_confirm::select_screen(
         GET_TEXT_F(MSG_BUTTON_DONE), GET_TEXT_F(MSG_BUTTON_SKIP)
-      , []{ corner_probing_done = true; wait_for_probe = false; }
+      , []{ tramming_done = true; wait_for_probe = false; }
       , []{ wait_for_probe = false; }
       , GET_TEXT_F(MSG_BED_TRAMMING_RAISE)
     );
@@ -207,23 +208,25 @@ static void _lcd_level_bed_corners_get_next_position() {
   void _lcd_draw_level_prompt() {
     if (!ui.should_draw()) return;
     MenuItem_confirm::select_screen(
-        GET_TEXT_F(TERN(HAS_LEVELING, MSG_BUTTON_LEVEL, MSG_BUTTON_DONE)),
+        GET_TEXT_F(TERN(HAS_LEVELING, MSG_BUTTON_LEVEL, MSG_BUTTON_DONE))
-        TERN(HAS_LEVELING, GET_TEXT_F(MSG_BUTTON_BACK), nullptr)
+      , TERN(HAS_LEVELING, GET_TEXT_F(MSG_BUTTON_BACK), nullptr)
       , []{ queue.inject(TERN(HAS_LEVELING, F("G29N"), FPSTR(G28_STR))); ui.return_to_status(); }
       , TERN(HAS_LEVELING, ui.goto_previous_screen_no_defer, []{})
       , GET_TEXT_F(MSG_BED_TRAMMING_IN_RANGE)
     );
   }
 
-  bool _lcd_level_bed_corners_probe(bool verify=false) {
+  bool _lcd_bed_tramming_probe(bool verify=false) {
-    if (verify) do_blocking_move_to_z(current_position.z + BED_TRAMMING_Z_HOP); // do clearance if needed
+    if (verify) line_to_z(BED_TRAMMING_Z_HOP); // do clearance if needed
     TERN_(BLTOUCH, if (!bltouch.high_speed_mode) bltouch.deploy()); // Deploy in LOW SPEED MODE on every probe action
     do_blocking_move_to_z(last_z - BED_TRAMMING_PROBE_TOLERANCE, MMM_TO_MMS(Z_PROBE_FEEDRATE_SLOW)); // Move down to lower tolerance
     if (TEST(endstops.trigger_state(), Z_MIN_PROBE)) { // check if probe triggered
       endstops.hit_on_purpose();
       set_current_from_steppers_for_axis(Z_AXIS);
       sync_plan_position();
+
       TERN_(BLTOUCH, if (!bltouch.high_speed_mode) bltouch.stow()); // Stow in LOW SPEED MODE on every trigger
+
       // Triggered outside tolerance range?
       if (ABS(current_position.z - last_z) > BED_TRAMMING_PROBE_TOLERANCE) {
         last_z = current_position.z; // Above tolerance. Set a new Z for subsequent corners.
@@ -231,13 +234,13 @@ static void _lcd_level_bed_corners_get_next_position() {
       }
       return true; // probe triggered
     }
-    do_blocking_move_to_z(last_z); // go back to tolerance middle point before raise
+    line_to_z(last_z); // go back to tolerance middle point before raise
     return false; // probe not triggered
   }
 
-  bool _lcd_level_bed_corners_raise() {
+  bool _lcd_bed_tramming_raise() {
     bool probe_triggered = false;
-    corner_probing_done = false;
+    tramming_done = false;
     wait_for_probe = true;
     ui.goto_screen(_lcd_draw_raise); // show raise screen
     ui.set_selection(true);
@@ -264,25 +267,25 @@ static void _lcd_level_bed_corners_get_next_position() {
       ui.refresh(LCDVIEW_REDRAW_NOW);
       _lcd_draw_probing();                                // update screen with # of good points
 
-      do_blocking_move_to_z(current_position.z + BED_TRAMMING_Z_HOP + TERN0(BLTOUCH, bltouch.z_extra_clearance())); // clearance
+      line_to_z(current_position.z + BED_TRAMMING_Z_HOP + TERN0(BLTOUCH, bltouch.z_extra_clearance())); // clearance
 
-      _lcd_level_bed_corners_get_next_position();         // Select next corner coordinates
+      _lcd_bed_tramming_get_next_position();              // Select next corner coordinates
       current_position -= probe.offset_xy;                // Account for probe offsets
       do_blocking_move_to_xy(current_position);           // Goto corner
 
       TERN_(BLTOUCH, if (bltouch.high_speed_mode) bltouch.deploy()); // Deploy in HIGH SPEED MODE
-      if (!_lcd_level_bed_corners_probe()) {              // Probe down to tolerance
+      if (!_lcd_bed_tramming_probe()) {                   // Probe down to tolerance
-        if (_lcd_level_bed_corners_raise()) {             // Prompt user to raise bed if needed
+        if (_lcd_bed_tramming_raise()) {                  // Prompt user to raise bed if needed
-          #if ENABLED(BED_TRAMMING_VERIFY_RAISED)        // Verify
+          #if ENABLED(BED_TRAMMING_VERIFY_RAISED)         // Verify
-            while (!_lcd_level_bed_corners_probe(true)) { // Loop while corner verified
+            while (!_lcd_bed_tramming_probe(true)) {      // Loop while corner verified
-              if (!_lcd_level_bed_corners_raise()) {      // Prompt user to raise bed if needed
+              if (!_lcd_bed_tramming_raise()) {           // Prompt user to raise bed if needed
-                if (corner_probing_done) return;          // Done was selected
+                if (tramming_done) return;                // Done was selected
                 break;                                    // Skip was selected
               }
             }
           #endif
         }
-        else if (corner_probing_done)                     // Done was selected
+        else if (tramming_done)                           // Done was selected
           return;
       }
 
@@ -293,9 +296,9 @@ static void _lcd_level_bed_corners_get_next_position() {
 
     #if ENABLED(BLTOUCH)
       if (bltouch.high_speed_mode) {
-        // In HIGH SPEED MODE do clearance and stow at the very end
+        // In HIGH SPEED MODE do stow and clearance at the very end
-        do_blocking_move_to_z(current_position.z + BED_TRAMMING_Z_HOP);
         bltouch.stow();
+        do_z_clearance(BED_TRAMMING_Z_HOP);
       }
     #endif
 
@@ -309,7 +312,7 @@ static void _lcd_level_bed_corners_get_next_position() {
     line_to_z(BED_TRAMMING_Z_HOP);
 
     // Select next corner coordinates
-    _lcd_level_bed_corners_get_next_position();
+    _lcd_bed_tramming_get_next_position();
 
     line_to_current_position(manual_feedrate_mm_s.x);
     line_to_z(BED_TRAMMING_HEIGHT);
@@ -318,15 +321,19 @@ static void _lcd_level_bed_corners_get_next_position() {
 
 #endif // !BED_TRAMMING_USE_PROBE
 
-static void _lcd_level_bed_corners_homing() {
+void _lcd_bed_tramming_homing() {
   _lcd_draw_homing();
   if (!all_axes_homed()) return;
+
   #if ENABLED(BED_TRAMMING_USE_PROBE)
+
     _lcd_test_corners();
-    if (corner_probing_done) ui.goto_previous_screen_no_defer();
+    if (tramming_done) ui.goto_previous_screen_no_defer();
-    TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
+    TERN_(HAS_LEVELING, set_bed_leveling_enabled(menu_leveling_was_active));
     endstops.enable_z_probe(false);
-  #else
+
+  #else // !BED_TRAMMING_USE_PROBE
+
     bed_corner = 0;
     ui.goto_screen([]{
       MenuItem_confirm::select_screen(
@@ -334,7 +341,7 @@ static void _lcd_level_bed_corners_homing() {
         , _lcd_goto_next_corner
         , []{
             line_to_z(BED_TRAMMING_Z_HOP); // Raise Z off the bed when done
-            TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
+            TERN_(HAS_LEVELING, set_bed_leveling_enabled(menu_leveling_was_active));
             ui.goto_previous_screen_no_defer();
           }
         , GET_TEXT_F(TERN(BED_TRAMMING_INCLUDE_CENTER, MSG_LEVEL_BED_NEXT_POINT, MSG_NEXT_CORNER))
@@ -343,10 +350,11 @@ static void _lcd_level_bed_corners_homing() {
     });
     ui.set_selection(true);
     _lcd_goto_next_corner();
-  #endif
+
+  #endif // !BED_TRAMMING_USE_PROBE
 }
 
-void _lcd_level_bed_corners() {
+void _lcd_bed_tramming() {
   ui.defer_status_screen();
   if (!all_axes_trusted()) {
     set_all_unhomed();
@@ -355,11 +363,11 @@ void _lcd_level_bed_corners() {
 
   // Disable leveling so the planner won't mess with us
   #if HAS_LEVELING
-    leveling_was_active = planner.leveling_active;
+    menu_leveling_was_active = planner.leveling_active;
     set_bed_leveling_enabled(false);
   #endif
 
-  ui.goto_screen(_lcd_level_bed_corners_homing);
+  ui.goto_screen(_lcd_bed_tramming_homing);
 }
 
 #endif // HAS_MARLINUI_MENU && LCD_BED_TRAMMING

Marlin/src/lcd/menu/menu_item.h

@@ -537,7 +537,7 @@ class MenuItem_bool : public MenuEditItemBase {
 #define YESNO_ITEM_N(N,LABEL, V...)                  YESNO_ITEM_N_F(N, GET_TEXT_F(LABEL), ##V)
 
 #if ENABLED(LCD_BED_TRAMMING)
-  void _lcd_level_bed_corners();
+  void _lcd_bed_tramming();
 #endif
 
 #if HAS_FAN

Marlin/src/lcd/menu/menu_motion.cpp

@@ -411,7 +411,7 @@ void menu_motion() {
   #endif
 
   #if ENABLED(LCD_BED_TRAMMING) && DISABLED(LCD_BED_LEVELING)
-    SUBMENU(MSG_BED_TRAMMING, _lcd_level_bed_corners);
+    SUBMENU(MSG_BED_TRAMMING, _lcd_bed_tramming);
   #endif
 
   #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)

Marlin/src/lcd/menu/menu_probe_offset.cpp

@@ -51,7 +51,7 @@ inline void z_clearance_move() {
 void set_offset_and_go_back(const_float_t z) {
   probe.offset.z = z;
   SET_SOFT_ENDSTOP_LOOSE(false);
-  TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
+  TERN_(HAS_LEVELING, set_bed_leveling_enabled(menu_leveling_was_active));
   ui.goto_previous_screen_no_defer();
 }
 
@@ -143,7 +143,7 @@ void goto_probe_offset_wizard() {
 
   // Store Bed-Leveling-State and disable
   #if HAS_LEVELING
-    leveling_was_active = planner.leveling_active;
+    menu_leveling_was_active = planner.leveling_active;
     set_bed_leveling_enabled(false);
   #endif
 

Marlin/src/lcd/menu/menu_x_twist.cpp

@@ -46,7 +46,7 @@ float measured_z, z_offset;
 void xatc_wizard_done() {
   if (!ui.wait_for_move) {
     xatc.print_points();
-    set_bed_leveling_enabled(leveling_was_active);
+    set_bed_leveling_enabled(menu_leveling_was_active);
     SET_SOFT_ENDSTOP_LOOSE(false);
     ui.goto_screen(menu_advanced_settings);
   }
@@ -199,7 +199,7 @@ void xatc_wizard_homing() {
 void xatc_wizard_continue() {
   // Store Bed-Leveling-State and disable
   #if HAS_LEVELING
-    leveling_was_active = planner.leveling_active;
+    menu_leveling_was_active = planner.leveling_active;
     set_bed_leveling_enabled(false);
   #endif
 

Marlin/src/module/probe.cpp

@@ -528,7 +528,7 @@ bool Probe::set_deployed(const bool deploy) {
     }
   #endif
 
-  const xy_pos_t old_xy = current_position;
+  const xy_pos_t old_xy = current_position;        // Remember location before probe deployment
 
   #if ENABLED(PROBE_TRIGGERED_WHEN_STOWED_TEST)
 
@@ -625,7 +625,7 @@ bool Probe::probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s) {
 
   // Offset sensorless probing
   #if HAS_DELTA_SENSORLESS_PROBING
-    if (probe_triggered) probe.refresh_largest_sensorless_adj();
+    if (probe_triggered) refresh_largest_sensorless_adj();
   #endif
 
   TERN_(HAS_QUIET_PROBING, set_probing_paused(false));

Marlin/src/module/probe.h

@@ -114,7 +114,7 @@ public:
         }
       #endif
 
-    #else
+    #else // !IS_KINEMATIC
 
       static bool obstacle_check(const_float_t rx, const_float_t ry) {
         #if ENABLED(AVOID_OBSTACLES)
@@ -166,7 +166,7 @@ public:
         }
       }
 
-    #endif
+    #endif // !IS_KINEMATIC
 
     static void move_z_after_probing() {
       #ifdef Z_AFTER_PROBING
@@ -178,7 +178,7 @@ public:
       return probe_at_point(pos.x, pos.y, raise_after, verbose_level, probe_relative, sanity_check);
     }
 
-  #else
+  #else // !HAS_BED_PROBE
 
     static constexpr xyz_pos_t offset = xyz_pos_t(NUM_AXIS_ARRAY_1(0)); // See #16767
 
@@ -186,7 +186,7 @@ public:
 
     static bool can_reach(const_float_t rx, const_float_t ry, const bool=true) { return position_is_reachable(rx, ry); }
 
-  #endif
+  #endif // !HAS_BED_PROBE
 
   static void move_z_after_homing() {
     #if ALL(DWIN_LCD_PROUI, INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING) || defined(Z_AFTER_HOMING)

buildroot/share/PlatformIO/scripts/common-dependencies.h

@@ -54,7 +54,7 @@
     #define HAS_MENU_BACKLASH
   #endif
   #if ENABLED(LCD_BED_TRAMMING)
-    #define HAS_MENU_BED_CORNERS
+    #define HAS_MENU_BED_TRAMMING
   #endif
   #if ENABLED(CANCEL_OBJECTS)
     #define HAS_MENU_CANCELOBJECT
@@ -99,7 +99,7 @@
     #define HAS_MENU_TOUCH_SCREEN
   #endif
   #if ENABLED(ASSISTED_TRAMMING_WIZARD)
-    #define HAS_MENU_TRAMMING
+    #define HAS_MENU_TRAMMING_WIZARD
   #endif
   #if ENABLED(AUTO_BED_LEVELING_UBL)
     #define HAS_MENU_UBL

buildroot/tests/BIGTREE_GTR_V1_0

@@ -16,7 +16,8 @@ opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_
         FIL_RUNOUT6_PIN 8 FIL_RUNOUT7_PIN 9 FIL_RUNOUT8_PIN 10 FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH \
         FILAMENT_RUNOUT_SCRIPT '"M600 T%c"'
 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE \
-           FILAMENT_RUNOUT_SENSOR FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP FILAMENT_CHANGE_RESUME_ON_INSERT PAUSE_REHEAT_FAST_RESUME
+           FILAMENT_RUNOUT_SENSOR FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP FILAMENT_CHANGE_RESUME_ON_INSERT PAUSE_REHEAT_FAST_RESUME \
+           LCD_BED_TRAMMING BED_TRAMMING_USE_PROBE
 exec_test $1 $2 "BigTreeTech GTR | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors w/ distinct states" "$3"
 
 restore_configs

ini/features.ini

@@ -60,8 +60,8 @@ MARLIN_INVADERS                        = src_filter=+<src/lcd/menu/game/invaders
 MARLIN_MAZE                            = src_filter=+<src/lcd/menu/game/maze.cpp>
 MARLIN_SNAKE                           = src_filter=+<src/lcd/menu/game/snake.cpp>
 HAS_MENU_BACKLASH                      = src_filter=+<src/lcd/menu/menu_backlash.cpp>
-HAS_MENU_BED_CORNERS                   = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
 LCD_BED_LEVELING                       = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
+HAS_MENU_BED_TRAMMING                  = src_filter=+<src/lcd/menu/menu_bed_tramming.cpp>
 HAS_MENU_CANCELOBJECT                  = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
 HAS_MENU_DELTA_CALIBRATE               = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
 HAS_MENU_FILAMENT                      = src_filter=+<src/lcd/menu/menu_filament.cpp>
@@ -78,7 +78,7 @@ HAS_MENU_CUTTER                        = src_filter=+<src/lcd/menu/menu_spindle_
 HAS_MENU_TEMPERATURE                   = src_filter=+<src/lcd/menu/menu_temperature.cpp>
 HAS_MENU_TMC                           = src_filter=+<src/lcd/menu/menu_tmc.cpp>
 HAS_MENU_TOUCH_SCREEN                  = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
-HAS_MENU_TRAMMING                      = src_filter=+<src/lcd/menu/menu_tramming.cpp>
+HAS_MENU_TRAMMING_WIZARD               = src_filter=+<src/lcd/menu/menu_tramming_wizard.cpp>
 HAS_MENU_UBL                           = src_filter=+<src/lcd/menu/menu_ubl.cpp>
 ANYCUBIC_LCD_CHIRON                    = src_filter=+<src/lcd/extui/anycubic_chiron>
 ANYCUBIC_LCD_I3MEGA                    = src_filter=+<src/lcd/extui/anycubic_i3mega>

platformio.ini

@@ -60,8 +60,8 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared> -<src/t
   -<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp>
   -<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp>
   -<src/lcd/menu/menu_backlash.cpp>
-  -<src/lcd/menu/menu_bed_corners.cpp>
   -<src/lcd/menu/menu_bed_leveling.cpp>
+  -<src/lcd/menu/menu_bed_tramming.cpp>
   -<src/lcd/menu/menu_cancelobject.cpp>
   -<src/lcd/menu/menu_delta_calibrate.cpp>
   -<src/lcd/menu/menu_filament.cpp>
@@ -77,7 +77,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared> -<src/t
   -<src/lcd/menu/menu_temperature.cpp>
   -<src/lcd/menu/menu_tmc.cpp>
   -<src/lcd/menu/menu_touch_screen.cpp>
-  -<src/lcd/menu/menu_tramming.cpp>
+  -<src/lcd/menu/menu_tramming_wizard.cpp>
   -<src/lcd/menu/menu_ubl.cpp>
   -<src/lcd/menu/menu_x_twist.cpp>
   -<src/lcd/extui/anycubic_chiron>