From 154e48ba22ceedb01e9058a7f8da9457a445ee19 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 26 May 2023 18:54:50 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=8E=A8=20Misc.=20spacing?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/lcd/language/language_ca.h | 2 +- Marlin/src/lcd/language/language_da.h | 8 +- Marlin/src/lcd/language/language_de.h | 2 +- Marlin/src/lcd/language/language_el.h | 14 +- Marlin/src/lcd/language/language_es.h | 2 +- Marlin/src/lcd/language/language_eu.h | 2 +- Marlin/src/lcd/language/language_fi.h | 2 +- Marlin/src/lcd/language/language_fr.h | 2 +- Marlin/src/lcd/language/language_fr_na.h | 2 +- Marlin/src/lcd/language/language_gl.h | 2 +- Marlin/src/lcd/language/language_hr.h | 2 +- Marlin/src/lcd/language/language_hu.h | 2 +- Marlin/src/lcd/language/language_it.h | 16 +- Marlin/src/lcd/language/language_jp_kana.h | 328 ++++---- Marlin/src/lcd/language/language_ko_KR.h | 2 +- Marlin/src/lcd/language/language_nl.h | 10 +- Marlin/src/lcd/language/language_pl.h | 2 +- Marlin/src/lcd/language/language_pt_br.h | 2 +- Marlin/src/lcd/language/language_ro.h | 2 +- Marlin/src/lcd/language/language_sk.h | 2 +- Marlin/src/lcd/language/language_tr.h | 2 +- Marlin/src/lcd/language/language_uk.h | 2 +- Marlin/src/lcd/language/language_vi.h | 341 ++++---- Marlin/src/lcd/language/language_zh_CN.h | 606 +++++++------- Marlin/src/lcd/language/language_zh_TW.h | 768 +++++++++--------- .../pins/stm32f1/pins_KEDI_CONTROLLER_V1_2.h | 10 +- 26 files changed, 1068 insertions(+), 1067 deletions(-) diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index ac6d4388e1..b750ff1551 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -122,7 +122,7 @@ namespace Language_ca { LSTR MSG_STORE_EEPROM = _UxGT("Desa memoria"); LSTR MSG_LOAD_EEPROM = _UxGT("Carrega memoria"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Restaura valors"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Actualitza"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Actualitza"); LSTR MSG_INFO_SCREEN = _UxGT("Pantalla Info."); LSTR MSG_PREPARE = _UxGT("Prepara"); LSTR MSG_TUNE = _UxGT("Ajusta"); diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index a424883000..91dc3513f7 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -92,9 +92,9 @@ namespace Language_da { LSTR MSG_FAN_SPEED = _UxGT("Blæser hastighed"); LSTR MSG_FAN_SPEED_N = _UxGT("Blæser hastighed ~"); LSTR MSG_CONTROL = _UxGT("Kontrol"); - LSTR MSG_MIN = _UxGT(" \002 Min"); - LSTR MSG_MAX = _UxGT(" \002 Max"); - LSTR MSG_FACTOR = _UxGT(" \002 Fact"); + LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min"); + LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max"); + LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Fact"); LSTR MSG_AUTOTEMP = _UxGT("Autotemp"); LSTR MSG_LCD_ON = _UxGT("Til"); LSTR MSG_LCD_OFF = _UxGT("Fra"); @@ -111,7 +111,7 @@ namespace Language_da { LSTR MSG_STORE_EEPROM = _UxGT("Gem i EEPROM"); LSTR MSG_LOAD_EEPROM = _UxGT("Hent fra EEPROM"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Gendan Defaults"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Genopfrisk"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Genopfrisk"); LSTR MSG_INFO_SCREEN = _UxGT("Info skærm"); LSTR MSG_PREPARE = _UxGT("Forbered"); LSTR MSG_PAUSE_PRINT = _UxGT("Pause printet"); diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index 359afd8ad2..2e75c2668b 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -513,7 +513,7 @@ namespace Language_de { LSTR MSG_FILAMENTUNLOAD = _UxGT("Filament entladen"); LSTR MSG_FILAMENTUNLOAD_E = _UxGT("Filament entladen *"); LSTR MSG_FILAMENTUNLOAD_ALL = _UxGT("Alles entladen"); - LSTR MSG_ATTACH_MEDIA = _UxGT("Medium initial."); // Manually initialize the SD-card via user interface + LSTR MSG_ATTACH_MEDIA = _UxGT("Medium initial."); // Manually initialize the SD-card via user interface LSTR MSG_CHANGE_MEDIA = _UxGT("Medium getauscht"); // SD-card changed by user. For machines with no autocarddetect. Both send "M21" LSTR MSG_RELEASE_MEDIA = _UxGT("Medium freigeben"); // if Marlin gets confused - M22 LSTR MSG_ZPROBE_OUT = _UxGT("Z-Sonde außerhalb"); diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h index e18bda4edf..aab74cc494 100644 --- a/Marlin/src/lcd/language/language_el.h +++ b/Marlin/src/lcd/language/language_el.h @@ -70,16 +70,16 @@ namespace Language_el { LSTR MSG_PREHEAT_1_END = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" End"); LSTR MSG_PREHEAT_1_END_E = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" End ~"); LSTR MSG_PREHEAT_1_ALL = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" όλα"); - LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" bed"); //SHORTEN - LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" επιβεβαίωση"); //SHORTEN + LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" bed"); // SHORTEN + LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" επιβεβαίωση"); // SHORTEN LSTR MSG_PREHEAT_M = _UxGT("Προθέρμανση $"); LSTR MSG_PREHEAT_M_H = _UxGT("Προθέρμανση $ ~"); LSTR MSG_PREHEAT_M_END = _UxGT("Προθέρμανση $ End"); LSTR MSG_PREHEAT_M_END_E = _UxGT("Προθέρμανση $ End ~"); LSTR MSG_PREHEAT_M_ALL = _UxGT("Προθέρμανση $ όλα"); - LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("Προθέρμανση $ bed"); //SHORTEN - LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("Προθέρμανση $ επιβεβαίωση"); //SHORTEN + LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("Προθέρμανση $ bed"); // SHORTEN + LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("Προθέρμανση $ επιβεβαίωση"); // SHORTEN #endif LSTR MSG_COOLDOWN = _UxGT("Αποθέρμανση"); LSTR MSG_SWITCH_PS_ON = _UxGT("Ενεργοποίηση"); @@ -157,7 +157,7 @@ namespace Language_el { LSTR MSG_STORE_EEPROM = _UxGT("Αποθήκευση σε EEPROM"); LSTR MSG_LOAD_EEPROM = _UxGT("Φόρτωση από EEPROM"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Επαναφορά προεπιλογών"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Ανανέωση"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Ανανέωση"); LSTR MSG_INFO_SCREEN = _UxGT("Οθόνη πληροφόρησης"); LSTR MSG_PREPARE = _UxGT("Προετοιμασία"); LSTR MSG_TUNE = _UxGT("Συντονισμός"); @@ -173,7 +173,7 @@ namespace Language_el { LSTR MSG_KILLED = _UxGT("ΤΕΡΜΑΤΙΣΜΟΣ. "); LSTR MSG_STOPPED = _UxGT("ΔΙΑΚΟΠΗ. "); LSTR MSG_CONTROL_RETRACT = _UxGT("Ανάσυρση μμ"); - LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Εναλλαγή ανάσυρσης mm"); //SHORTEN + LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Εναλλαγή ανάσυρσης mm"); // SHORTEN LSTR MSG_CONTROL_RETRACTF = _UxGT("Ανάσυρση V"); LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Μεταπήδηση mm"); LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("Unretr. mm"); @@ -184,7 +184,7 @@ namespace Language_el { LSTR MSG_FILAMENTCHANGE_E = _UxGT("Αλλαγή νήματος *"); LSTR MSG_ATTACH_MEDIA = _UxGT("Προετοιμασία SD"); LSTR MSG_CHANGE_MEDIA = _UxGT("Αλλαγή κάρτας SD"); - LSTR MSG_ZPROBE_OUT = _UxGT("Διερεύνηση Z εκτός Επ.Εκτύπωσης"); //SHORTEN + LSTR MSG_ZPROBE_OUT = _UxGT("Διερεύνηση Z εκτός Επ.Εκτύπωσης"); // SHORTEN LSTR MSG_YX_UNHOMED = _UxGT("Επαναφορά Χ/Υ πρώτα"); LSTR MSG_XYZ_UNHOMED = _UxGT("Επαναφορά ΧΥΖ πρώτα"); LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Μετατόπιση Ζ"); diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index b2e5af70f5..a487c7d289 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -319,7 +319,7 @@ namespace Language_es { LSTR MSG_ERR_EEPROM_VERSION = _UxGT("Err: Versión EEPROM"); LSTR MSG_MEDIA_UPDATE = _UxGT("Actualizar SD/FD"); LSTR MSG_RESET_PRINTER = _UxGT("Resetear Impresora"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Recargar"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Recargar"); LSTR MSG_INFO_SCREEN = _UxGT("Pantalla de Inf."); LSTR MSG_PREPARE = _UxGT("Preparar"); LSTR MSG_TUNE = _UxGT("Ajustar"); diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index 9b969762d5..6433fde99f 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -194,7 +194,7 @@ namespace Language_eu { LSTR MSG_LOAD_EEPROM = _UxGT("Kargatu memoria"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Larri. berriz."); LSTR MSG_INIT_EEPROM = _UxGT("EEPROM-a hasieratu"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Berriz kargatu"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Berriz kargatu"); LSTR MSG_INFO_SCREEN = _UxGT("Pantaila info"); LSTR MSG_PREPARE = _UxGT("Prestatu"); LSTR MSG_TUNE = _UxGT("Doitu"); diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h index 57fc0a7c21..8d5e4c7143 100644 --- a/Marlin/src/lcd/language/language_fi.h +++ b/Marlin/src/lcd/language/language_fi.h @@ -102,7 +102,7 @@ namespace Language_fi { LSTR MSG_STORE_EEPROM = _UxGT("Tallenna muistiin"); LSTR MSG_LOAD_EEPROM = _UxGT("Lataa muistista"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Palauta oletus"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Päivitä"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Päivitä"); LSTR MSG_INFO_SCREEN = _UxGT("Seuraa"); LSTR MSG_PREPARE = _UxGT("Valmistele"); LSTR MSG_TUNE = _UxGT("Säädä"); diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 01422f5c76..4f04345252 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -331,7 +331,7 @@ namespace Language_fr { LSTR MSG_SETTINGS_STORED = _UxGT("Config. enregistrée"); LSTR MSG_MEDIA_UPDATE = _UxGT("MaJ Firmware SD"); LSTR MSG_RESET_PRINTER = _UxGT("RaZ imprimante"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Actualiser"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Actualiser"); LSTR MSG_INFO_SCREEN = _UxGT("Surveiller"); LSTR MSG_PREPARE = _UxGT("Préparer"); LSTR MSG_TUNE = _UxGT("Régler"); diff --git a/Marlin/src/lcd/language/language_fr_na.h b/Marlin/src/lcd/language/language_fr_na.h index 12fa0295ea..4441a7970a 100644 --- a/Marlin/src/lcd/language/language_fr_na.h +++ b/Marlin/src/lcd/language/language_fr_na.h @@ -331,7 +331,7 @@ namespace Language_fr_na { LSTR MSG_SETTINGS_STORED = _UxGT("Config. enregistree"); LSTR MSG_MEDIA_UPDATE = _UxGT("MaJ Firmware SD"); LSTR MSG_RESET_PRINTER = _UxGT("RaZ imprimante"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Actualiser"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Actualiser"); LSTR MSG_INFO_SCREEN = _UxGT("Surveiller"); LSTR MSG_PREPARE = _UxGT("Preparer"); LSTR MSG_TUNE = _UxGT("Regler"); diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index fcdee2405c..25b30f71eb 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -322,7 +322,7 @@ namespace Language_gl { LSTR MSG_SETTINGS_STORED = _UxGT("Config Gardada"); LSTR MSG_MEDIA_UPDATE = _UxGT("Actualizar SD/FD"); LSTR MSG_RESET_PRINTER = _UxGT("Reiniciar Impresora"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Recargar"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Recargar"); LSTR MSG_INFO_SCREEN = _UxGT("Información"); LSTR MSG_PREPARE = _UxGT("Preparar"); LSTR MSG_TUNE = _UxGT("Axustar"); diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h index 1f51c5c539..a857fb3619 100644 --- a/Marlin/src/lcd/language/language_hr.h +++ b/Marlin/src/lcd/language/language_hr.h @@ -105,7 +105,7 @@ namespace Language_hr { LSTR MSG_STORE_EEPROM = _UxGT("Pohrani u memoriju"); LSTR MSG_LOAD_EEPROM = _UxGT("Učitaj memoriju"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Učitaj Defaults"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Osvježi"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Osvježi"); LSTR MSG_INFO_SCREEN = _UxGT("Info screen"); LSTR MSG_PREPARE = _UxGT("Pripremi"); LSTR MSG_PAUSE_PRINT = _UxGT("Pauziraj print"); diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h index 8a6f66f994..f3880a31a6 100644 --- a/Marlin/src/lcd/language/language_hu.h +++ b/Marlin/src/lcd/language/language_hu.h @@ -368,7 +368,7 @@ namespace Language_hu { LSTR MSG_SETTINGS_STORED = _UxGT("Beállítások mentve"); LSTR MSG_MEDIA_UPDATE = _UxGT("Tároló frissítés"); LSTR MSG_RESET_PRINTER = _UxGT("Nyomtató újraindítása"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Frissítés"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Frissítés"); LSTR MSG_INFO_SCREEN = _UxGT(""); LSTR MSG_PREPARE = _UxGT("Vezérlés"); LSTR MSG_TUNE = _UxGT("Hangolás"); diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index 96c1499f55..a6b48b0d0a 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -338,11 +338,11 @@ namespace Language_it { LSTR MSG_FLOWMETER_SAFETY = _UxGT("Sicurezza flusso"); LSTR MSG_CUTTER = _UxGT("Taglio"); LSTR MSG_LASER = _UxGT("Laser"); - LSTR MSG_FAN_SPEED = _UxGT("Vel. ventola"); // Max 15 characters - LSTR MSG_FAN_SPEED_N = _UxGT("Vel. ventola ~"); // Max 15 characters - LSTR MSG_STORED_FAN_N = _UxGT("Ventola mem. ~"); // Max 15 characters - LSTR MSG_EXTRA_FAN_SPEED = _UxGT("Extra vel.vent."); // Max 15 characters - LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra v.vent. ~"); // Max 15 characters + LSTR MSG_FAN_SPEED = _UxGT("Vel. ventola"); // Max 15 characters + LSTR MSG_FAN_SPEED_N = _UxGT("Vel. ventola ~"); // Max 15 characters + LSTR MSG_STORED_FAN_N = _UxGT("Ventola mem. ~"); // Max 15 characters + LSTR MSG_EXTRA_FAN_SPEED = _UxGT("Extra vel.vent."); // Max 15 characters + LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra v.vent. ~"); // Max 15 characters LSTR MSG_CONTROLLER_FAN = _UxGT("Controller vent."); LSTR MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("Vel. inattivo"); LSTR MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("Modo autom."); @@ -597,7 +597,7 @@ namespace Language_it { LSTR MSG_BABYSTEP_N = _UxGT("Babystep @"); LSTR MSG_BABYSTEP_TOTAL = _UxGT("Totali"); LSTR MSG_ENDSTOP_ABORT = _UxGT("Interrompi se FC"); - LSTR MSG_HEATING_FAILED_LCD = _UxGT("Risc.Fallito"); // Max 12 characters + LSTR MSG_HEATING_FAILED_LCD = _UxGT("Risc.Fallito"); // Max 12 characters LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("Err: TEMP RIDONDANTE"); LSTR MSG_THERMAL_RUNAWAY = _UxGT("TEMP FUORI CONTROLLO"); LSTR MSG_TEMP_MALFUNCTION = _UxGT("MALFUNZIONAMENTO TEMP"); @@ -702,13 +702,13 @@ namespace Language_it { LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Riprendi stampa"); LSTR MSG_FILAMENT_CHANGE_PURGE_CONTINUE = _UxGT("Spurga o continua?"); LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Ugello: "); - LSTR MSG_RUNOUT_SENSOR = _UxGT("Sens.filo termin."); // Max 17 characters + LSTR MSG_RUNOUT_SENSOR = _UxGT("Sens.filo termin."); // Max 17 characters LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("Dist mm filo term."); LSTR MSG_RUNOUT_ENABLE = _UxGT("Abil.filo termin."); LSTR MSG_RUNOUT_ACTIVE = _UxGT("Filo termin. attivo"); LSTR MSG_INVERT_EXTRUDER = _UxGT("Inverti estrusore"); LSTR MSG_EXTRUDER_MIN_TEMP = _UxGT("Temp.min estrusore"); - LSTR MSG_FANCHECK = _UxGT("Verif.tacho vent."); // Max 17 characters + LSTR MSG_FANCHECK = _UxGT("Verif.tacho vent."); // Max 17 characters LSTR MSG_KILL_HOMING_FAILED = _UxGT("Home fallito"); LSTR MSG_LCD_PROBING_FAILED = _UxGT("Sondaggio fallito"); diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h index 7570710838..950ddcb5e5 100644 --- a/Marlin/src/lcd/language/language_jp_kana.h +++ b/Marlin/src/lcd/language/language_jp_kana.h @@ -42,188 +42,188 @@ namespace Language_jp_kana { // 片仮名表示定義 LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" ジュンビカンリョウ"); - LSTR MSG_MEDIA_INSERTED = _UxGT("メディアガソウニュウサレマシタ"); // "Card inserted" - LSTR MSG_MEDIA_REMOVED = _UxGT("メディアガアリマセン"); // "Card removed" + LSTR MSG_MEDIA_INSERTED = _UxGT("メディアガソウニュウサレマシタ"); // "Card inserted" + LSTR MSG_MEDIA_REMOVED = _UxGT("メディアガアリマセン"); // "Card removed" LSTR MSG_RELEASE_MEDIA = _UxGT("メディアノトリダシ"); - LSTR MSG_LCD_ENDSTOPS = _UxGT("エンドストップ"); // "Endstops" // Max length 8 characters - LSTR MSG_MAIN_MENU = _UxGT("メイン"); // "Main" - LSTR MSG_RUN_AUTO_FILES = _UxGT("ジドウカイシ"); // "Autostart" - LSTR MSG_DISABLE_STEPPERS = _UxGT("モーターデンゲン オフ"); // "Disable steppers" - LSTR MSG_DEBUG_MENU = _UxGT("デバッグメニュー"); // "Debug Menu" - LSTR MSG_PROGRESS_BAR_TEST = _UxGT("プログレスバー テスト"); // "Progress Bar Test" - LSTR MSG_AUTO_HOME = _UxGT("ゲンテンフッキ"); // "Auto home" - LSTR MSG_AUTO_HOME_X = _UxGT("Xジク ゲンテンフッキ"); // "Home X" - LSTR MSG_AUTO_HOME_Y = _UxGT("Yジク ゲンテンフッキ"); // "Home Y" - LSTR MSG_AUTO_HOME_Z = _UxGT("Zジク ゲンテンフッキ"); // "Home Z" - LSTR MSG_LEVEL_BED_HOMING = _UxGT("ゲンテンフッキチュウ"); // "Homing XYZ" - LSTR MSG_LEVEL_BED_WAITING = _UxGT("レベリングカイシ"); // "Click to Begin" - LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("ツギノソクテイテンヘ"); // "Next Point" - LSTR MSG_LEVEL_BED_DONE = _UxGT("レベリングカンリョウ"); // "Leveling Done!" - LSTR MSG_SET_HOME_OFFSETS = _UxGT("キジュンオフセットセッテイ"); // "Set home offsets" - LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("オフセットガテキヨウサレマシタ"); // "Offsets applied" + LSTR MSG_LCD_ENDSTOPS = _UxGT("エンドストップ"); // "Endstops" // Max length 8 characters + LSTR MSG_MAIN_MENU = _UxGT("メイン"); // "Main" + LSTR MSG_RUN_AUTO_FILES = _UxGT("ジドウカイシ"); // "Autostart" + LSTR MSG_DISABLE_STEPPERS = _UxGT("モーターデンゲン オフ"); // "Disable steppers" + LSTR MSG_DEBUG_MENU = _UxGT("デバッグメニュー"); // "Debug Menu" + LSTR MSG_PROGRESS_BAR_TEST = _UxGT("プログレスバー テスト"); // "Progress Bar Test" + LSTR MSG_AUTO_HOME = _UxGT("ゲンテンフッキ"); // "Auto home" + LSTR MSG_AUTO_HOME_X = _UxGT("Xジク ゲンテンフッキ"); // "Home X" + LSTR MSG_AUTO_HOME_Y = _UxGT("Yジク ゲンテンフッキ"); // "Home Y" + LSTR MSG_AUTO_HOME_Z = _UxGT("Zジク ゲンテンフッキ"); // "Home Z" + LSTR MSG_LEVEL_BED_HOMING = _UxGT("ゲンテンフッキチュウ"); // "Homing XYZ" + LSTR MSG_LEVEL_BED_WAITING = _UxGT("レベリングカイシ"); // "Click to Begin" + LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("ツギノソクテイテンヘ"); // "Next Point" + LSTR MSG_LEVEL_BED_DONE = _UxGT("レベリングカンリョウ"); // "Leveling Done!" + LSTR MSG_SET_HOME_OFFSETS = _UxGT("キジュンオフセットセッテイ"); // "Set home offsets" + LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("オフセットガテキヨウサレマシタ"); // "Offsets applied" #if HAS_PREHEAT - LSTR MSG_PREHEAT_1 = PREHEAT_1_LABEL _UxGT(" ヨネツ"); // "Preheat " PREHEAT_1_LABEL - LSTR MSG_PREHEAT_1_H = PREHEAT_1_LABEL _UxGT(" ヨネツ ~"); // "Preheat " PREHEAT_1_LABEL - LSTR MSG_PREHEAT_1_END = PREHEAT_1_LABEL _UxGT(" ヨネツノズル"); // " Nozzle" - LSTR MSG_PREHEAT_1_END_E = PREHEAT_1_LABEL _UxGT(" ヨネツノズル ~"); // " Nozzle" - LSTR MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" スベテヨネツ"); // " All" - LSTR MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" ベッドヨネツ"); // " Bed" - LSTR MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" ヨネツセッテイ"); // " conf" + LSTR MSG_PREHEAT_1 = PREHEAT_1_LABEL _UxGT(" ヨネツ"); // "Preheat " PREHEAT_1_LABEL + LSTR MSG_PREHEAT_1_H = PREHEAT_1_LABEL _UxGT(" ヨネツ ~"); // "Preheat " PREHEAT_1_LABEL + LSTR MSG_PREHEAT_1_END = PREHEAT_1_LABEL _UxGT(" ヨネツノズル"); // " Nozzle" + LSTR MSG_PREHEAT_1_END_E = PREHEAT_1_LABEL _UxGT(" ヨネツノズル ~"); // " Nozzle" + LSTR MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" スベテヨネツ"); // " All" + LSTR MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" ベッドヨネツ"); // " Bed" + LSTR MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" ヨネツセッテイ"); // " conf" - LSTR MSG_PREHEAT_M = _UxGT("$ ヨネツ"); // "Preheat " PREHEAT_1_LABEL - LSTR MSG_PREHEAT_M_H = _UxGT("$ ヨネツ ~"); // "Preheat " PREHEAT_1_LABEL - LSTR MSG_PREHEAT_M_END = _UxGT("$ ヨネツノズル"); // " Nozzle" - LSTR MSG_PREHEAT_M_END_E = _UxGT("$ ヨネツノズル ~"); // " Nozzle" - LSTR MSG_PREHEAT_M_ALL = _UxGT("$ スベテヨネツ"); // " All" - LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("$ ベッドヨネツ"); // " Bed" - LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("$ ヨネツセッテイ"); // " conf" + LSTR MSG_PREHEAT_M = _UxGT("$ ヨネツ"); // "Preheat " PREHEAT_1_LABEL + LSTR MSG_PREHEAT_M_H = _UxGT("$ ヨネツ ~"); // "Preheat " PREHEAT_1_LABEL + LSTR MSG_PREHEAT_M_END = _UxGT("$ ヨネツノズル"); // " Nozzle" + LSTR MSG_PREHEAT_M_END_E = _UxGT("$ ヨネツノズル ~"); // " Nozzle" + LSTR MSG_PREHEAT_M_ALL = _UxGT("$ スベテヨネツ"); // " All" + LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("$ ベッドヨネツ"); // " Bed" + LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("$ ヨネツセッテイ"); // " conf" #endif - LSTR MSG_COOLDOWN = _UxGT("カネツテイシ"); // "Cooldown" - LSTR MSG_SWITCH_PS_ON = _UxGT("デンゲン オン"); // "Switch power on" - LSTR MSG_SWITCH_PS_OFF = _UxGT("デンゲン オフ"); // "Switch power off" - LSTR MSG_EXTRUDE = _UxGT("オシダシ"); // "Extrude" - LSTR MSG_RETRACT = _UxGT("ヒキコミセッテイ"); // "Retract" - LSTR MSG_MOVE_AXIS = _UxGT("ジクイドウ"); // "Move axis" - LSTR MSG_BED_LEVELING = _UxGT("ベッドレベリング"); // "Bed leveling" - LSTR MSG_LEVEL_BED = _UxGT("ベッドレベリング"); // "Level bed" + LSTR MSG_COOLDOWN = _UxGT("カネツテイシ"); // "Cooldown" + LSTR MSG_SWITCH_PS_ON = _UxGT("デンゲン オン"); // "Switch power on" + LSTR MSG_SWITCH_PS_OFF = _UxGT("デンゲン オフ"); // "Switch power off" + LSTR MSG_EXTRUDE = _UxGT("オシダシ"); // "Extrude" + LSTR MSG_RETRACT = _UxGT("ヒキコミセッテイ"); // "Retract" + LSTR MSG_MOVE_AXIS = _UxGT("ジクイドウ"); // "Move axis" + LSTR MSG_BED_LEVELING = _UxGT("ベッドレベリング"); // "Bed leveling" + LSTR MSG_LEVEL_BED = _UxGT("ベッドレベリング"); // "Level bed" - LSTR MSG_MOVING = _UxGT("イドウチュウ"); // "Moving..." - LSTR MSG_FREE_XY = _UxGT("XYジク カイホウ"); // "Free XY" - LSTR MSG_MOVE_X = _UxGT("Xジク イドウ"); // "Move X" - LSTR MSG_MOVE_Y = _UxGT("Yジク イドウ"); // "Move Y" - LSTR MSG_MOVE_Z = _UxGT("Zジク イドウ"); // "Move Z" - LSTR MSG_MOVE_N = _UxGT("@ジク イドウ"); // "Move @" - LSTR MSG_MOVE_E = _UxGT("エクストルーダー"); // "Extruder" - LSTR MSG_MOVE_EN = _UxGT("* エクストルーダー"); // "En" - LSTR MSG_MOVE_N_MM = _UxGT("$mm イドウ"); // "Move 0.025mm" - LSTR MSG_MOVE_01MM = _UxGT("0.1mm イドウ"); // "Move 0.1mm" - LSTR MSG_MOVE_1MM = _UxGT(" 1mm イドウ"); // "Move 1mm" - LSTR MSG_MOVE_10MM = _UxGT(" 10mm イドウ"); // "Move 10mm" - LSTR MSG_MOVE_50MM = _UxGT(" 50mm イドウ"); // "Move 50mm" - LSTR MSG_MOVE_100MM = _UxGT(" 100mm イドウ"); // "Move 100mm" - LSTR MSG_SPEED = _UxGT("ソクド"); // "Speed" - LSTR MSG_MESH_Z_OFFSET = _UxGT("Zオフセット"); // "Bed Z" - LSTR MSG_NOZZLE = _UxGT("ノズル"); // "Nozzle" - LSTR MSG_BED = _UxGT("ベッド"); // "Bed" - LSTR MSG_FAN_SPEED = _UxGT("ファンソクド"); // "Fan speed" - LSTR MSG_FLOW = _UxGT("トシュツリョウ"); // "Flow" - LSTR MSG_CONTROL = _UxGT("セイギョ"); // "Control" + LSTR MSG_MOVING = _UxGT("イドウチュウ"); // "Moving..." + LSTR MSG_FREE_XY = _UxGT("XYジク カイホウ"); // "Free XY" + LSTR MSG_MOVE_X = _UxGT("Xジク イドウ"); // "Move X" + LSTR MSG_MOVE_Y = _UxGT("Yジク イドウ"); // "Move Y" + LSTR MSG_MOVE_Z = _UxGT("Zジク イドウ"); // "Move Z" + LSTR MSG_MOVE_N = _UxGT("@ジク イドウ"); // "Move @" + LSTR MSG_MOVE_E = _UxGT("エクストルーダー"); // "Extruder" + LSTR MSG_MOVE_EN = _UxGT("* エクストルーダー"); // "En" + LSTR MSG_MOVE_N_MM = _UxGT("$mm イドウ"); // "Move 0.025mm" + LSTR MSG_MOVE_01MM = _UxGT("0.1mm イドウ"); // "Move 0.1mm" + LSTR MSG_MOVE_1MM = _UxGT(" 1mm イドウ"); // "Move 1mm" + LSTR MSG_MOVE_10MM = _UxGT(" 10mm イドウ"); // "Move 10mm" + LSTR MSG_MOVE_50MM = _UxGT(" 50mm イドウ"); // "Move 50mm" + LSTR MSG_MOVE_100MM = _UxGT(" 100mm イドウ"); // "Move 100mm" + LSTR MSG_SPEED = _UxGT("ソクド"); // "Speed" + LSTR MSG_MESH_Z_OFFSET = _UxGT("Zオフセット"); // "Bed Z" + LSTR MSG_NOZZLE = _UxGT("ノズル"); // "Nozzle" + LSTR MSG_BED = _UxGT("ベッド"); // "Bed" + LSTR MSG_FAN_SPEED = _UxGT("ファンソクド"); // "Fan speed" + LSTR MSG_FLOW = _UxGT("トシュツリョウ"); // "Flow" + LSTR MSG_CONTROL = _UxGT("セイギョ"); // "Control" LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" サイテイ"); // " Min" LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" サイコウ"); // " Max" LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" ファクター"); // " Fact" - LSTR MSG_AUTOTEMP = _UxGT("ジドウオンドセイギョ"); // "Autotemp" - LSTR MSG_LCD_ON = _UxGT("オン"); // "On" - LSTR MSG_LCD_OFF = _UxGT("オフ"); // "Off" + LSTR MSG_AUTOTEMP = _UxGT("ジドウオンドセイギョ"); // "Autotemp" + LSTR MSG_LCD_ON = _UxGT("オン"); // "On" + LSTR MSG_LCD_OFF = _UxGT("オフ"); // "Off" LSTR MSG_SELECT_E = _UxGT("センタク *"); - LSTR MSG_ACC = _UxGT("カソクド mm/s") SUPERSCRIPT_TWO; // "Accel" - LSTR MSG_JERK = _UxGT("ヤクドウ mm/s"); // "Jerk" - LSTR MSG_VA_JERK = _UxGT("ジク ヤクドウ mm/s") STR_A; // "Va-jerk" - LSTR MSG_VB_JERK = _UxGT("ジク ヤクドウ mm/s") STR_B; // "Vb-jerk" - LSTR MSG_VC_JERK = _UxGT("ジク ヤクドウ mm/s") STR_C; // "Vc-jerk" - LSTR MSG_VN_JERK = _UxGT("ジク ヤクドウ mm/s@"); // "V@-jerk" + LSTR MSG_ACC = _UxGT("カソクド mm/s") SUPERSCRIPT_TWO; // "Accel" + LSTR MSG_JERK = _UxGT("ヤクドウ mm/s"); // "Jerk" + LSTR MSG_VA_JERK = _UxGT("ジク ヤクドウ mm/s") STR_A; // "Va-jerk" + LSTR MSG_VB_JERK = _UxGT("ジク ヤクドウ mm/s") STR_B; // "Vb-jerk" + LSTR MSG_VC_JERK = _UxGT("ジク ヤクドウ mm/s") STR_C; // "Vc-jerk" + LSTR MSG_VN_JERK = _UxGT("ジク ヤクドウ mm/s@"); // "V@-jerk" LSTR MSG_A_STEPS = STR_A _UxGT("ステップ/mm"); LSTR MSG_B_STEPS = STR_B _UxGT("ステップ/mm"); LSTR MSG_C_STEPS = STR_C _UxGT("ステップ/mm"); LSTR MSG_N_STEPS = _UxGT("@ステップ/mm"); - LSTR MSG_VE_JERK = _UxGT("エクストルーダー ヤクド"); // "Ve-jerk" - LSTR MSG_VMAX_A = _UxGT("サイダイオクリソクド ") STR_A; // "Vmax A" - LSTR MSG_VMAX_B = _UxGT("サイダイオクリソクド ") STR_B; // "Vmax B" - LSTR MSG_VMAX_C = _UxGT("サイダイオクリソクド ") STR_C; // "Vmax C" - LSTR MSG_VMAX_E = _UxGT("サイダイオクリソクド E"); // "Vmax E" - LSTR MSG_VMAX_EN = _UxGT("サイダイオクリソクド *"); // "Vmax E1" - LSTR MSG_VMIN = _UxGT("サイショウオクリソクド"); // "Vmin" - LSTR MSG_VTRAV_MIN = _UxGT("サイショウイドウソクド"); // "VTrav min" - LSTR MSG_ACCELERATION = _UxGT("カソクド mm/s") SUPERSCRIPT_TWO; // "Accel" - LSTR MSG_A_RETRACT = _UxGT("ヒキコミカソクド"); // "A-retract" - LSTR MSG_A_TRAVEL = _UxGT("イドウカソクド"); // "A-travel" - LSTR MSG_TEMPERATURE = _UxGT("オンド"); // "Temperature" - LSTR MSG_MOTION = _UxGT("ウゴキセッテイ"); // "Motion" - LSTR MSG_FILAMENT = _UxGT("フィラメント"); // "Filament" + LSTR MSG_VE_JERK = _UxGT("エクストルーダー ヤクド"); // "Ve-jerk" + LSTR MSG_VMAX_A = _UxGT("サイダイオクリソクド ") STR_A; // "Vmax A" + LSTR MSG_VMAX_B = _UxGT("サイダイオクリソクド ") STR_B; // "Vmax B" + LSTR MSG_VMAX_C = _UxGT("サイダイオクリソクド ") STR_C; // "Vmax C" + LSTR MSG_VMAX_E = _UxGT("サイダイオクリソクド E"); // "Vmax E" + LSTR MSG_VMAX_EN = _UxGT("サイダイオクリソクド *"); // "Vmax E1" + LSTR MSG_VMIN = _UxGT("サイショウオクリソクド"); // "Vmin" + LSTR MSG_VTRAV_MIN = _UxGT("サイショウイドウソクド"); // "VTrav min" + LSTR MSG_ACCELERATION = _UxGT("カソクド mm/s") SUPERSCRIPT_TWO; // "Accel" + LSTR MSG_A_RETRACT = _UxGT("ヒキコミカソクド"); // "A-retract" + LSTR MSG_A_TRAVEL = _UxGT("イドウカソクド"); // "A-travel" + LSTR MSG_TEMPERATURE = _UxGT("オンド"); // "Temperature" + LSTR MSG_MOTION = _UxGT("ウゴキセッテイ"); // "Motion" + LSTR MSG_FILAMENT = _UxGT("フィラメント"); // "Filament" LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm") SUPERSCRIPT_THREE; - LSTR MSG_FILAMENT_DIAM = _UxGT("フィラメントチョッケイ"); // "Fil. Dia." + LSTR MSG_FILAMENT_DIAM = _UxGT("フィラメントチョッケイ"); // "Fil. Dia." LSTR MSG_FILAMENT_DIAM_E = _UxGT("フィラメントチョッケイ *"); - LSTR MSG_CONTRAST = _UxGT("LCDコントラスト"); // "LCD contrast" - LSTR MSG_STORE_EEPROM = _UxGT("EEPROMヘホゾン"); // "Store memory" - LSTR MSG_LOAD_EEPROM = _UxGT("EEPROMカラヨミコミ"); // "Load memory" - LSTR MSG_RESTORE_DEFAULTS = _UxGT("セッテイリセット"); // "Restore Defaults" - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("リフレッシュ"); // "Refresh" - LSTR MSG_INFO_SCREEN = _UxGT("ジョウホウガメン"); // "Info screen" - LSTR MSG_PREPARE = _UxGT("ジュンビセッテイ"); // "Prepare" - LSTR MSG_TUNE = _UxGT("チョウセイ"); // "Tune" - LSTR MSG_PAUSE_PRINT = _UxGT("イチジテイシ"); // "Pause print" - LSTR MSG_RESUME_PRINT = _UxGT("プリントサイカイ"); // "Resume print" - LSTR MSG_STOP_PRINT = _UxGT("プリントテイシ"); // "Stop print" - LSTR MSG_MEDIA_MENU = _UxGT("メディアカラプリント"); // "Print from SD" - LSTR MSG_NO_MEDIA = _UxGT("メディアガアリマセン"); // "Card removed" - LSTR MSG_DWELL = _UxGT("キュウシ"); // "Sleep..." - LSTR MSG_USERWAIT = _UxGT("ツヅケルニハクリックシテクダサイ"); // "Wait for user..." - LSTR MSG_PRINT_ABORTED = _UxGT("プリントガチュウシサレマシタ"); // "Print aborted" - LSTR MSG_NO_MOVE = _UxGT("ウゴキマセン"); // "No move." - LSTR MSG_KILLED = _UxGT("ヒジョウテイシ"); // "KILLED. " - LSTR MSG_STOPPED = _UxGT("テイシシマシタ"); // "STOPPED. " - LSTR MSG_CONTROL_RETRACT = _UxGT("ヒキコミリョウ mm"); // "Retract mm" - LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("ヒキコミリョウS mm"); // "Swap Re.mm" - LSTR MSG_CONTROL_RETRACTF = _UxGT("ヒキコミソクド mm/s"); // "Retract V" - LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("ノズルタイヒ mm"); // "Hop mm" - LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("ホショウリョウ mm"); // "Unretr. mm" - LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("ホショウリョウS mm"); // "S Unretr. mm" - LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("ホショウソクド mm/s"); // "Unretract V" - LSTR MSG_AUTORETRACT = _UxGT("ジドウヒキコミ"); // "Auto-Retract" - LSTR MSG_FILAMENTCHANGE = _UxGT("フィラメントコウカン"); // "Change filament" - LSTR MSG_ATTACH_MEDIA = _UxGT("メディアサイヨミコミ"); // "Init. SD card" - LSTR MSG_CHANGE_MEDIA = _UxGT("メディアコウカン"); // "Change SD card" - LSTR MSG_ZPROBE_OUT = _UxGT("Zプローブ ベッドガイ"); // "Z probe out. bed" - LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch ジコシンダン"); // "BLTouch Self-Test" - LSTR MSG_BLTOUCH_RESET = _UxGT("BLTouch リセット"); // "Reset BLTouch" + LSTR MSG_CONTRAST = _UxGT("LCDコントラスト"); // "LCD contrast" + LSTR MSG_STORE_EEPROM = _UxGT("EEPROMヘホゾン"); // "Store memory" + LSTR MSG_LOAD_EEPROM = _UxGT("EEPROMカラヨミコミ"); // "Load memory" + LSTR MSG_RESTORE_DEFAULTS = _UxGT("セッテイリセット"); // "Restore Defaults" + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("リフレッシュ"); // "Refresh" + LSTR MSG_INFO_SCREEN = _UxGT("ジョウホウガメン"); // "Info screen" + LSTR MSG_PREPARE = _UxGT("ジュンビセッテイ"); // "Prepare" + LSTR MSG_TUNE = _UxGT("チョウセイ"); // "Tune" + LSTR MSG_PAUSE_PRINT = _UxGT("イチジテイシ"); // "Pause print" + LSTR MSG_RESUME_PRINT = _UxGT("プリントサイカイ"); // "Resume print" + LSTR MSG_STOP_PRINT = _UxGT("プリントテイシ"); // "Stop print" + LSTR MSG_MEDIA_MENU = _UxGT("メディアカラプリント"); // "Print from SD" + LSTR MSG_NO_MEDIA = _UxGT("メディアガアリマセン"); // "Card removed" + LSTR MSG_DWELL = _UxGT("キュウシ"); // "Sleep..." + LSTR MSG_USERWAIT = _UxGT("ツヅケルニハクリックシテクダサイ"); // "Wait for user..." + LSTR MSG_PRINT_ABORTED = _UxGT("プリントガチュウシサレマシタ"); // "Print aborted" + LSTR MSG_NO_MOVE = _UxGT("ウゴキマセン"); // "No move." + LSTR MSG_KILLED = _UxGT("ヒジョウテイシ"); // "KILLED. " + LSTR MSG_STOPPED = _UxGT("テイシシマシタ"); // "STOPPED. " + LSTR MSG_CONTROL_RETRACT = _UxGT("ヒキコミリョウ mm"); // "Retract mm" + LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("ヒキコミリョウS mm"); // "Swap Re.mm" + LSTR MSG_CONTROL_RETRACTF = _UxGT("ヒキコミソクド mm/s"); // "Retract V" + LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("ノズルタイヒ mm"); // "Hop mm" + LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("ホショウリョウ mm"); // "Unretr. mm" + LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("ホショウリョウS mm"); // "S Unretr. mm" + LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("ホショウソクド mm/s"); // "Unretract V" + LSTR MSG_AUTORETRACT = _UxGT("ジドウヒキコミ"); // "Auto-Retract" + LSTR MSG_FILAMENTCHANGE = _UxGT("フィラメントコウカン"); // "Change filament" + LSTR MSG_ATTACH_MEDIA = _UxGT("メディアサイヨミコミ"); // "Init. SD card" + LSTR MSG_CHANGE_MEDIA = _UxGT("メディアコウカン"); // "Change SD card" + LSTR MSG_ZPROBE_OUT = _UxGT("Zプローブ ベッドガイ"); // "Z probe out. bed" + LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch ジコシンダン"); // "BLTouch Self-Test" + LSTR MSG_BLTOUCH_RESET = _UxGT("BLTouch リセット"); // "Reset BLTouch" LSTR MSG_HOME_FIRST = _UxGT("サキニ %s ヲフッキサセテクダサイ"); // "Home ... first" - LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Zオフセット"); // "Z Offset" - LSTR MSG_BABYSTEP_X = _UxGT("Xジク ビドウ"); // "Babystep X" - LSTR MSG_BABYSTEP_Y = _UxGT("Yジク ビドウ"); // "Babystep Y" - LSTR MSG_BABYSTEP_Z = _UxGT("Zジク ビドウ"); // "Babystep Z" - LSTR MSG_ENDSTOP_ABORT = _UxGT("イドウゲンカイケンチキノウ"); // "Endstop abort" - LSTR MSG_HEATING_FAILED_LCD = _UxGT("カネツシッパイ"); // "Heating failed" - LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("エラー:ジョウチョウサーミスターキノウ"); // "Err: REDUNDANT TEMP" - LSTR MSG_THERMAL_RUNAWAY = _UxGT("ネツボウソウ"); // "THERMAL RUNAWAY" - LSTR MSG_ERR_MAXTEMP = _UxGT("エラー:サイコウオンチョウカ"); // "Err: MAXTEMP" - LSTR MSG_ERR_MINTEMP = _UxGT("エラー:サイテイオンミマン"); // "Err: MINTEMP" - LSTR MSG_HALTED = _UxGT("プリンターハテイシシマシタ"); // "PRINTER HALTED" - LSTR MSG_PLEASE_RESET = _UxGT("リセットシテクダサイ"); // "Please reset" - LSTR MSG_HEATING = _UxGT("カネツチュウ"); // "Heating..." - LSTR MSG_BED_HEATING = _UxGT("ベッド カネツチュウ"); // "Bed Heating..." - LSTR MSG_DELTA_CALIBRATE = _UxGT("デルタ コウセイ"); // "Delta Calibration" - LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Xジク コウセイ"); // "Calibrate X" - LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Yジク コウセイ"); // "Calibrate Y" - LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("Zジク コウセイ"); // "Calibrate Z" - LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("チュウシン コウセイ"); // "Calibrate Center" - LSTR MSG_INFO_MENU = _UxGT("コノプリンターニツイテ"); // "About Printer" - LSTR MSG_INFO_PRINTER_MENU = _UxGT("プリンタージョウホウ"); // "Printer Info" - LSTR MSG_INFO_STATS_MENU = _UxGT("プリントジョウキョウ"); // "Printer Stats" - LSTR MSG_INFO_BOARD_MENU = _UxGT("セイギョケイジョウホウ"); // "Board Info" - LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("サーミスター"); // "Thermistors" - LSTR MSG_INFO_EXTRUDERS = _UxGT("エクストルーダースウ"); // "Extruders" - LSTR MSG_INFO_BAUDRATE = _UxGT("ボーレート"); // "Baud" - LSTR MSG_INFO_PROTOCOL = _UxGT("プロトコル"); // "Protocol" - LSTR MSG_CASE_LIGHT = _UxGT("キョウタイナイショウメイ"); // "Case light" - LSTR MSG_INFO_PRINT_COUNT = _UxGT("プリントスウ "); // "Print Count" - LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("カンリョウスウ"); // "Completed" - LSTR MSG_INFO_PRINT_TIME = _UxGT("プリントジカンルイケイ"); // "Total print time" - LSTR MSG_INFO_PRINT_LONGEST = _UxGT("サイチョウプリントジカン"); // "Longest job time" - LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("フィラメントシヨウリョウルイケイ"); // "Extruded total" - LSTR MSG_INFO_MIN_TEMP = _UxGT("セッテイサイテイオン"); // "Min Temp" - LSTR MSG_INFO_MAX_TEMP = _UxGT("セッテイサイコウオン"); // "Max Temp" - LSTR MSG_INFO_PSU = _UxGT("デンゲンシュベツ"); // "Power Supply" - LSTR MSG_DRIVE_STRENGTH = _UxGT("モータークドウリョク"); // "Drive Strength" - LSTR MSG_DAC_PERCENT_N = _UxGT("@ DACシュツリョク %"); // "@ Driver %" - LSTR MSG_DAC_EEPROM_WRITE = _UxGT("EEPROMヘホゾン"); // "Store memory" + LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Zオフセット"); // "Z Offset" + LSTR MSG_BABYSTEP_X = _UxGT("Xジク ビドウ"); // "Babystep X" + LSTR MSG_BABYSTEP_Y = _UxGT("Yジク ビドウ"); // "Babystep Y" + LSTR MSG_BABYSTEP_Z = _UxGT("Zジク ビドウ"); // "Babystep Z" + LSTR MSG_ENDSTOP_ABORT = _UxGT("イドウゲンカイケンチキノウ"); // "Endstop abort" + LSTR MSG_HEATING_FAILED_LCD = _UxGT("カネツシッパイ"); // "Heating failed" + LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("エラー:ジョウチョウサーミスターキノウ"); // "Err: REDUNDANT TEMP" + LSTR MSG_THERMAL_RUNAWAY = _UxGT("ネツボウソウ"); // "THERMAL RUNAWAY" + LSTR MSG_ERR_MAXTEMP = _UxGT("エラー:サイコウオンチョウカ"); // "Err: MAXTEMP" + LSTR MSG_ERR_MINTEMP = _UxGT("エラー:サイテイオンミマン"); // "Err: MINTEMP" + LSTR MSG_HALTED = _UxGT("プリンターハテイシシマシタ"); // "PRINTER HALTED" + LSTR MSG_PLEASE_RESET = _UxGT("リセットシテクダサイ"); // "Please reset" + LSTR MSG_HEATING = _UxGT("カネツチュウ"); // "Heating..." + LSTR MSG_BED_HEATING = _UxGT("ベッド カネツチュウ"); // "Bed Heating..." + LSTR MSG_DELTA_CALIBRATE = _UxGT("デルタ コウセイ"); // "Delta Calibration" + LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Xジク コウセイ"); // "Calibrate X" + LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Yジク コウセイ"); // "Calibrate Y" + LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("Zジク コウセイ"); // "Calibrate Z" + LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("チュウシン コウセイ"); // "Calibrate Center" + LSTR MSG_INFO_MENU = _UxGT("コノプリンターニツイテ"); // "About Printer" + LSTR MSG_INFO_PRINTER_MENU = _UxGT("プリンタージョウホウ"); // "Printer Info" + LSTR MSG_INFO_STATS_MENU = _UxGT("プリントジョウキョウ"); // "Printer Stats" + LSTR MSG_INFO_BOARD_MENU = _UxGT("セイギョケイジョウホウ"); // "Board Info" + LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("サーミスター"); // "Thermistors" + LSTR MSG_INFO_EXTRUDERS = _UxGT("エクストルーダースウ"); // "Extruders" + LSTR MSG_INFO_BAUDRATE = _UxGT("ボーレート"); // "Baud" + LSTR MSG_INFO_PROTOCOL = _UxGT("プロトコル"); // "Protocol" + LSTR MSG_CASE_LIGHT = _UxGT("キョウタイナイショウメイ"); // "Case light" + LSTR MSG_INFO_PRINT_COUNT = _UxGT("プリントスウ "); // "Print Count" + LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("カンリョウスウ"); // "Completed" + LSTR MSG_INFO_PRINT_TIME = _UxGT("プリントジカンルイケイ"); // "Total print time" + LSTR MSG_INFO_PRINT_LONGEST = _UxGT("サイチョウプリントジカン"); // "Longest job time" + LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("フィラメントシヨウリョウルイケイ"); // "Extruded total" + LSTR MSG_INFO_MIN_TEMP = _UxGT("セッテイサイテイオン"); // "Min Temp" + LSTR MSG_INFO_MAX_TEMP = _UxGT("セッテイサイコウオン"); // "Max Temp" + LSTR MSG_INFO_PSU = _UxGT("デンゲンシュベツ"); // "Power Supply" + LSTR MSG_DRIVE_STRENGTH = _UxGT("モータークドウリョク"); // "Drive Strength" + LSTR MSG_DAC_PERCENT_N = _UxGT("@ DACシュツリョク %"); // "@ Driver %" + LSTR MSG_DAC_EEPROM_WRITE = _UxGT("EEPROMヘホゾン"); // "Store memory" LSTR MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("イチジテイシ"); - LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("プリントサイカイ"); // "Resume print" - LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("コウカンヲカイシシマス", "シバラクオマチクダサイ")); // "Wait for start of the filament" - LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("フィラメントヌキダシチュウ", "シバラクオマチクダサイ")); // "Wait for filament unload" - LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("フィラメントヲソウニュウシ,", "クリックスルトゾッコウシマス")); // "Insert filament and press button" - LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("フィラメントソウテンチュウ", "シバラクオマチクダサイ")); // "Wait for filament load" - LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("プリントヲサイカイシマス", "シバラクオマチクダサイ")); // "Wait for print to resume" + LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("プリントサイカイ"); // "Resume print" + LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("コウカンヲカイシシマス", "シバラクオマチクダサイ")); // "Wait for start of the filament" + LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("フィラメントヌキダシチュウ", "シバラクオマチクダサイ")); // "Wait for filament unload" + LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("フィラメントヲソウニュウシ,", "クリックスルトゾッコウシマス")); // "Insert filament and press button" + LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("フィラメントソウテンチュウ", "シバラクオマチクダサイ")); // "Wait for filament load" + LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("プリントヲサイカイシマス", "シバラクオマチクダサイ")); // "Wait for print to resume" - LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("マチガッタプリンター"); // "Wrong printer" + LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("マチガッタプリンター"); // "Wrong printer" LSTR MSG_CONFIGURATION = _UxGT("セッテイカンリ"); LSTR MSG_ADVANCED_SETTINGS = _UxGT("ショウサイセッテイ"); diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h index e52ced2dad..27be037344 100644 --- a/Marlin/src/lcd/language/language_ko_KR.h +++ b/Marlin/src/lcd/language/language_ko_KR.h @@ -88,7 +88,7 @@ namespace Language_ko_KR { LSTR MSG_LOAD_EEPROM = _UxGT("설정 읽어오기"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("설정 되돌리기"); LSTR MSG_INIT_EEPROM = _UxGT("EEPROM 초기화"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("새로고침"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("새로고침"); LSTR MSG_INFO_SCREEN = _UxGT("처음으로"); LSTR MSG_PREPARE = _UxGT("준비하기"); LSTR MSG_PAUSE_PRINT = _UxGT("일시정지"); diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h index d708135fac..bc60d19946 100644 --- a/Marlin/src/lcd/language/language_nl.h +++ b/Marlin/src/lcd/language/language_nl.h @@ -113,7 +113,7 @@ namespace Language_nl { LSTR MSG_TEMPERATURE = _UxGT("Temperatuur"); LSTR MSG_MOTION = _UxGT("Beweging"); LSTR MSG_FILAMENT = _UxGT("Filament"); - LSTR MSG_ADVANCE_K = _UxGT("Advance K"); // accepted english dutch + LSTR MSG_ADVANCE_K = _UxGT("Advance K"); // accepted english dutch LSTR MSG_ADVANCE_K_E = _UxGT("Advance K *"); // accepted english dutch LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm") SUPERSCRIPT_THREE; LSTR MSG_FILAMENT_DIAM = _UxGT("Fil. Dia."); @@ -122,7 +122,7 @@ namespace Language_nl { LSTR MSG_STORE_EEPROM = _UxGT("Geheugen opslaan"); LSTR MSG_LOAD_EEPROM = _UxGT("Geheugen laden"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Noodstop reset"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Ververs"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Ververs"); LSTR MSG_INFO_SCREEN = _UxGT("Info scherm"); LSTR MSG_PREPARE = _UxGT("Voorbereiden"); LSTR MSG_TUNE = _UxGT("Afstellen"); @@ -137,7 +137,7 @@ namespace Language_nl { LSTR MSG_NO_MOVE = _UxGT("Geen beweging."); LSTR MSG_KILLED = _UxGT("Afgebroken. "); LSTR MSG_STOPPED = _UxGT("Gestopt. "); - LSTR MSG_CONTROL_RETRACT = _UxGT("Retract mm"); // accepted English term in Dutch + LSTR MSG_CONTROL_RETRACT = _UxGT("Retract mm"); // accepted English term in Dutch LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Ruil Retract mm"); LSTR MSG_CONTROL_RETRACTF = _UxGT("Retract F"); LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); @@ -153,7 +153,7 @@ namespace Language_nl { LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Zelf-Test"); LSTR MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch"); LSTR MSG_HOME_FIRST = _UxGT("Home %s Eerst"); - LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Z Offset"); // accepted English term in Dutch + LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Z Offset"); // accepted English term in Dutch LSTR MSG_BABYSTEP_X = _UxGT("Babystap X"); LSTR MSG_BABYSTEP_Y = _UxGT("Babystap Y"); LSTR MSG_BABYSTEP_Z = _UxGT("Babystap Z"); @@ -196,7 +196,7 @@ namespace Language_nl { LSTR MSG_INFO_MIN_TEMP = _UxGT("Min Temp"); LSTR MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); - LSTR MSG_INFO_PSU = _UxGT("PSU"); // accepted English term in Dutch + LSTR MSG_INFO_PSU = _UxGT("PSU"); // accepted English term in Dutch LSTR MSG_DRIVE_STRENGTH = _UxGT("Motorstroom"); diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index 855a1e3bd1..8aa12d903d 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -306,7 +306,7 @@ namespace Language_pl { LSTR MSG_INIT_EEPROM = _UxGT("Initializuj EEPROM"); LSTR MSG_MEDIA_UPDATE = _UxGT("Uaktualnij kartę"); LSTR MSG_RESET_PRINTER = _UxGT("Resetuj drukarkę"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Odswież"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Odswież"); LSTR MSG_INFO_SCREEN = _UxGT("Ekran główny"); LSTR MSG_PREPARE = _UxGT("Przygotuj"); LSTR MSG_TUNE = _UxGT("Strojenie"); diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h index 4ace61e116..81344b60c4 100644 --- a/Marlin/src/lcd/language/language_pt_br.h +++ b/Marlin/src/lcd/language/language_pt_br.h @@ -274,7 +274,7 @@ namespace Language_pt_br { LSTR MSG_INIT_EEPROM = _UxGT("Iniciar EEPROM"); LSTR MSG_MEDIA_UPDATE = _UxGT("Atualiz. SD"); LSTR MSG_RESET_PRINTER = _UxGT("Resetar Impressora"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Atualização"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Atualização"); LSTR MSG_INFO_SCREEN = _UxGT("Informações"); LSTR MSG_PREPARE = _UxGT("Preparar"); LSTR MSG_TUNE = _UxGT("Ajustar"); diff --git a/Marlin/src/lcd/language/language_ro.h b/Marlin/src/lcd/language/language_ro.h index 75f27c1ecf..b4f7550a7f 100644 --- a/Marlin/src/lcd/language/language_ro.h +++ b/Marlin/src/lcd/language/language_ro.h @@ -323,7 +323,7 @@ namespace Language_ro { LSTR MSG_SETTINGS_STORED = _UxGT("Settings Stored"); LSTR MSG_MEDIA_UPDATE = _UxGT("Media Update"); LSTR MSG_RESET_PRINTER = _UxGT("Reset Imprimanta"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Refresh"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Refresh"); LSTR MSG_INFO_SCREEN = _UxGT("Info Screen"); LSTR MSG_PREPARE = _UxGT("Prepare"); LSTR MSG_TUNE = _UxGT("Tune"); diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index 572e7fe9ea..c7b2cef0d1 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -457,7 +457,7 @@ namespace Language_sk { LSTR MSG_SETTINGS_STORED = _UxGT("Nastavenie uložené"); LSTR MSG_MEDIA_UPDATE = _UxGT("Aktualiz. z karty"); LSTR MSG_RESET_PRINTER = _UxGT("Reštart. tlačiar."); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Obnoviť"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Obnoviť"); LSTR MSG_INFO_SCREEN = _UxGT("Info. obrazovka"); LSTR MSG_INFO_MACHINENAME = _UxGT("Názov stroja"); LSTR MSG_INFO_SIZE = _UxGT("Rozmer"); diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index 5fc78758d4..5be21c9c56 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -436,7 +436,7 @@ namespace Language_tr { LSTR MSG_SETTINGS_STORED = _UxGT("Ayarlar Kaydedildi"); LSTR MSG_MEDIA_UPDATE = _UxGT("SD Güncellemesi"); LSTR MSG_RESET_PRINTER = _UxGT("Yazıcıyı Resetle"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Yenile"); + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Yenile"); LSTR MSG_INFO_SCREEN = _UxGT("Bilgi Ekranı"); LSTR MSG_INFO_MACHINENAME = _UxGT("Makine Adı"); LSTR MSG_INFO_SIZE = _UxGT("Boyut"); diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h index 3a644a0b34..7a7f4a5f44 100644 --- a/Marlin/src/lcd/language/language_uk.h +++ b/Marlin/src/lcd/language/language_uk.h @@ -480,7 +480,7 @@ namespace Language_uk { LSTR MSG_POWER = _UxGT("Потужність"); LSTR MSG_START_PRINT = _UxGT("Почати друк"); - LSTR MSG_BUTTON_NEXT = _UxGT("Далі"); //short text for buttons + LSTR MSG_BUTTON_NEXT = _UxGT("Далі"); //short text for buttons LSTR MSG_BUTTON_INIT = _UxGT("Ініц-я"); LSTR MSG_BUTTON_STOP = _UxGT("Зупинка"); LSTR MSG_BUTTON_PRINT = _UxGT("Друк"); diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h index 5795c58a1e..2ce22961ca 100644 --- a/Marlin/src/lcd/language/language_vi.h +++ b/Marlin/src/lcd/language/language_vi.h @@ -43,7 +43,7 @@ namespace Language_vi { LSTR MSG_MEDIA_USB_REMOVED = _UxGT("USB được rút ra"); LSTR MSG_MEDIA_USB_FAILED = _UxGT("USB khởi thất bại"); LSTR MSG_LCD_ENDSTOPS = _UxGT("Công tắc"); // Endstops - công tắc hành trình - LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Công tắc mềm"); // soft Endstops + LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Công tắc mềm"); // Soft Endstops LSTR MSG_MAIN_MENU = _UxGT("Chính"); // Main LSTR MSG_ADVANCED_SETTINGS = _UxGT("Thiết lập cấp cao"); // Advanced Settings LSTR MSG_CONFIGURATION = _UxGT("Cấu hình"); // Configuration @@ -52,9 +52,9 @@ namespace Language_vi { LSTR MSG_DEBUG_MENU = _UxGT("Menu gỡ lỗi"); // Debug Menu LSTR MSG_PROGRESS_BAR_TEST = _UxGT("Kiểm tra tiến độ"); // Progress bar test LSTR MSG_AUTO_HOME = _UxGT("Về nhà tự động"); // Auto home - LSTR MSG_AUTO_HOME_X = _UxGT("Về nhà X"); // home X - LSTR MSG_AUTO_HOME_Y = _UxGT("Về nhà Y"); // home Y - LSTR MSG_AUTO_HOME_Z = _UxGT("Về nhà Z"); // home Z + LSTR MSG_AUTO_HOME_X = _UxGT("Về nhà X"); // Home X + LSTR MSG_AUTO_HOME_Y = _UxGT("Về nhà Y"); // Home Y + LSTR MSG_AUTO_HOME_Z = _UxGT("Về nhà Z"); // Home Z LSTR MSG_AUTO_Z_ALIGN = _UxGT("Chỉnh canh Z tự động"); LSTR MSG_LEVEL_BED_HOMING = _UxGT("Đang về nhà XYZ"); // Homing XYZ LSTR MSG_LEVEL_BED_WAITING = _UxGT("Nhấn để bắt đầu"); // Click to Begin @@ -68,17 +68,17 @@ namespace Language_vi { LSTR MSG_PREHEAT_1_H = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" trước ~"); // Preheat LSTR MSG_PREHEAT_1_END = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Đầu"); LSTR MSG_PREHEAT_1_END_E = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Đầu ~"); - LSTR MSG_PREHEAT_1_ALL = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Tất cả"); // all - LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Bàn"); // bed -- using vietnamese term for 'table' instead - LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Cấu hình"); // conf + LSTR MSG_PREHEAT_1_ALL = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Tất cả"); // All + LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Bàn"); // Bed -- using vietnamese term for 'table' instead + LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Cấu hình"); // Conf - LSTR MSG_PREHEAT_M = _UxGT("Làm nóng $ trước"); // Preheat - LSTR MSG_PREHEAT_M_H = _UxGT("Làm nóng $ trước ~"); // Preheat + LSTR MSG_PREHEAT_M = _UxGT("Làm nóng $ trước"); // Preheat + LSTR MSG_PREHEAT_M_H = _UxGT("Làm nóng $ trước ~"); // Preheat LSTR MSG_PREHEAT_M_END = _UxGT("Làm nóng $ Đầu"); LSTR MSG_PREHEAT_M_END_E = _UxGT("Làm nóng $ Đầu ~"); - LSTR MSG_PREHEAT_M_ALL = _UxGT("Làm nóng $ Tất cả"); // all - LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("Làm nóng $ Bàn"); // bed -- using vietnamese term for 'table' instead - LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("Làm nóng $ Cấu hình"); // conf + LSTR MSG_PREHEAT_M_ALL = _UxGT("Làm nóng $ Tất cả"); // All + LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("Làm nóng $ Bàn"); // Bed -- using vietnamese term for 'table' instead + LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("Làm nóng $ Cấu hình"); // Conf #endif LSTR MSG_PREHEAT_CUSTOM = _UxGT("Sự nóng trước tự chọn"); // Preheat Custom LSTR MSG_COOLDOWN = _UxGT("Nguội xuống"); // Cooldown @@ -112,7 +112,7 @@ namespace Language_vi { LSTR MSG_UBL_BC_INSERT = _UxGT("Đặt chêm và đo"); // Place shim & measure LSTR MSG_UBL_BC_INSERT2 = _UxGT("Đo"); // Measure LSTR MSG_UBL_BC_REMOVE = _UxGT("Tháo và đo bàn"); // Remove & measure bed - LSTR MSG_UBL_MOVING_TO_NEXT = _UxGT("Chuyển sang tiếp theo"); // moving to next + LSTR MSG_UBL_MOVING_TO_NEXT = _UxGT("Chuyển sang tiếp theo"); // Moving to next LSTR MSG_UBL_ACTIVATE_MESH = _UxGT("Bật UBL"); LSTR MSG_UBL_DEACTIVATE_MESH = _UxGT("Tắt UBL"); LSTR MSG_UBL_SET_TEMP_BED = _UxGT("Nhiệt độ bàn"); // Bed Temp @@ -133,7 +133,7 @@ namespace Language_vi { LSTR MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("Điều chỉnh chiều cao lưới"); // Adjust Mesh Height LSTR MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Số lượng chiều cao"); // Height Amount LSTR MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Thẩm tra lưới"); // Validate Mesh - LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Thẩm tra lưới tự chọn"); // validate custom mesh + LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Thẩm tra lưới tự chọn"); // Validate custom mesh LSTR MSG_UBL_CONTINUE_MESH = _UxGT("Tiếp tục xây lưới bàn"); // Continue Bed Mesh LSTR MSG_UBL_MESH_LEVELING = _UxGT("Đang san lấp lưới"); // Mesh Leveling LSTR MSG_UBL_3POINT_MESH_LEVELING = _UxGT("Đang san lấp 3-điểm"); // 3-Point Leveling @@ -210,20 +210,20 @@ namespace Language_vi { LSTR MSG_MESH_Z_OFFSET = _UxGT("Z Bàn"); LSTR MSG_NOZZLE = _UxGT("Đầu phun"); // Nozzle LSTR MSG_NOZZLE_N = _UxGT("Đầu phun ~"); - LSTR MSG_BED = _UxGT("Bàn"); // bed - LSTR MSG_FAN_SPEED = _UxGT("Tốc độ quạt"); // fan speed + LSTR MSG_BED = _UxGT("Bàn"); // Bed + LSTR MSG_FAN_SPEED = _UxGT("Tốc độ quạt"); // Fan speed LSTR MSG_FAN_SPEED_N = _UxGT("Tốc độ quạt ~"); LSTR MSG_EXTRA_FAN_SPEED = _UxGT("Tốc độ quạt phụ"); // Extra fan speed LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("Tốc độ quạt phụ ~"); LSTR MSG_FLOW = _UxGT("Lưu Lượng"); LSTR MSG_FLOW_N = _UxGT("Lưu Lượng ~"); LSTR MSG_CONTROL = _UxGT("Điều khiển"); // Control - LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Đa"); // min - LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Thiểu"); - LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Hệ Số"); // factor + LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Đa"); // Min + LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Thiểu"); // Max + LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Hệ Số"); // Factor LSTR MSG_AUTOTEMP = _UxGT("Nhiệt độ tự động"); // Autotemp - LSTR MSG_LCD_ON = _UxGT("Bật"); // on - LSTR MSG_LCD_OFF = _UxGT("Tắt"); // off + LSTR MSG_LCD_ON = _UxGT("Bật"); // On + LSTR MSG_LCD_OFF = _UxGT("Tắt"); // Off LSTR MSG_SELECT_E = _UxGT("Lựa *"); LSTR MSG_ACC = _UxGT("Tăng Tốc"); LSTR MSG_JERK = _UxGT("Giật"); @@ -233,8 +233,8 @@ namespace Language_vi { LSTR MSG_VN_JERK = _UxGT("Giật-V@"); LSTR MSG_VE_JERK = _UxGT("Giật-Ve"); LSTR MSG_JUNCTION_DEVIATION = _UxGT("Độ Lệch Chỗ Giao"); // Junction Dev - LSTR MSG_MAX_SPEED = _UxGT("Vận tốc"); // velocity - LSTR MSG_VMAX_A = _UxGT("Vđa") STR_A; // Vmax + LSTR MSG_MAX_SPEED = _UxGT("Vận tốc"); // Velocity + LSTR MSG_VMAX_A = _UxGT("Vđa") STR_A; // Vmax LSTR MSG_VMAX_B = _UxGT("Vđa") STR_B; LSTR MSG_VMAX_C = _UxGT("Vđa") STR_C; LSTR MSG_VMAX_N = _UxGT("Vđa@"); @@ -243,162 +243,162 @@ namespace Language_vi { LSTR MSG_VMIN = _UxGT("Vthiểu"); // Vmin LSTR MSG_VTRAV_MIN = _UxGT("Vchuyển thiểu"); // VTrav min LSTR MSG_ACCELERATION = _UxGT("Sự tăng tốc"); // Acceleration - LSTR MSG_AMAX_A = _UxGT("Tăng tốc ca") STR_A; // Amax + LSTR MSG_AMAX_A = _UxGT("Tăng tốc ca") STR_A; // Amax LSTR MSG_AMAX_B = _UxGT("Tăng tốc ca") STR_B; LSTR MSG_AMAX_C = _UxGT("Tăng tốc ca") STR_C; LSTR MSG_AMAX_N = _UxGT("Tăng tốc ca@"); LSTR MSG_AMAX_E = _UxGT("Tăng tốc caE"); LSTR MSG_AMAX_EN = _UxGT("Tăng tốc ca *"); - LSTR MSG_A_RETRACT = _UxGT("TT-Rút"); // A-retract - LSTR MSG_A_TRAVEL = _UxGT("TT-Chuyển"); // A-travel - LSTR MSG_STEPS_PER_MM = _UxGT("Bước/mm"); // Steps - LSTR MSG_A_STEPS = _UxGT("Bước") STR_A _UxGT("/mm"); // Steps/mm + LSTR MSG_A_RETRACT = _UxGT("TT-Rút"); // A-retract + LSTR MSG_A_TRAVEL = _UxGT("TT-Chuyển"); // A-travel + LSTR MSG_STEPS_PER_MM = _UxGT("Bước/mm"); // Steps + LSTR MSG_A_STEPS = _UxGT("Bước") STR_A _UxGT("/mm"); // Steps/mm LSTR MSG_B_STEPS = _UxGT("Bước") STR_B _UxGT("/mm"); LSTR MSG_C_STEPS = _UxGT("Bước") STR_C _UxGT("/mm"); LSTR MSG_N_STEPS = _UxGT("Bước@/mm"); LSTR MSG_E_STEPS = _UxGT("BướcE/mm"); LSTR MSG_EN_STEPS = _UxGT("Bước */mm"); - LSTR MSG_TEMPERATURE = _UxGT("Nhiệt độ"); // Temperature - LSTR MSG_MOTION = _UxGT("Chuyển động"); // Motion - LSTR MSG_FILAMENT = _UxGT("Vật liệu in"); // dây nhựa - LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E bằng mm") SUPERSCRIPT_THREE; // E in mm - LSTR MSG_FILAMENT_DIAM = _UxGT("Đường kính nhựa"); // Fil. Dai. + LSTR MSG_TEMPERATURE = _UxGT("Nhiệt độ"); // Temperature + LSTR MSG_MOTION = _UxGT("Chuyển động"); // Motion + LSTR MSG_FILAMENT = _UxGT("Vật liệu in"); // Dây nhựa + LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E bằng mm") SUPERSCRIPT_THREE; // E in mm + LSTR MSG_FILAMENT_DIAM = _UxGT("Đường kính nhựa"); // Fil. Dai. LSTR MSG_FILAMENT_DIAM_E = _UxGT("Đường kính nhựa *"); - LSTR MSG_FILAMENT_UNLOAD = _UxGT("Dỡ mm"); // unload mm + LSTR MSG_FILAMENT_UNLOAD = _UxGT("Dỡ mm"); // Unload mm LSTR MSG_FILAMENT_LOAD = _UxGT("Nạp mm"); - LSTR MSG_ADVANCE_K = _UxGT("K Cấp Cao"); // Advance K - LSTR MSG_ADVANCE_K_E = _UxGT("K Cấp Cao *"); // Advance K - LSTR MSG_CONTRAST = _UxGT("Độ tương phản LCD"); // LCD contrast - LSTR MSG_STORE_EEPROM = _UxGT("Lưu các thiết lập"); // Store settings - LSTR MSG_LOAD_EEPROM = _UxGT("Tải các cài đặt"); // Load settings - LSTR MSG_RESTORE_DEFAULTS = _UxGT("Khôi phục phòng hư"); // Restore Defaults - LSTR MSG_INIT_EEPROM = _UxGT("Khởi Tạo EEPROM"); // Initialize EEPROM - LSTR MSG_MEDIA_UPDATE = _UxGT("Cập Nhật phương tiện"); // Update media + LSTR MSG_ADVANCE_K = _UxGT("K Cấp Cao"); // Advance K + LSTR MSG_ADVANCE_K_E = _UxGT("K Cấp Cao *"); // Advance K + LSTR MSG_CONTRAST = _UxGT("Độ tương phản LCD"); // LCD contrast + LSTR MSG_STORE_EEPROM = _UxGT("Lưu các thiết lập"); // Store settings + LSTR MSG_LOAD_EEPROM = _UxGT("Tải các cài đặt"); // Load settings + LSTR MSG_RESTORE_DEFAULTS = _UxGT("Khôi phục phòng hư"); // Restore Defaults + LSTR MSG_INIT_EEPROM = _UxGT("Khởi Tạo EEPROM"); // Initialize EEPROM + LSTR MSG_MEDIA_UPDATE = _UxGT("Cập Nhật phương tiện"); // Update media LSTR MSG_RESET_PRINTER = _UxGT("Bặt Lại Máy In"); - LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Cập Nhật"); // Refresh - LSTR MSG_INFO_SCREEN = _UxGT("Màn Hình Thông Tin"); // Info screen - LSTR MSG_PREPARE = _UxGT("Chuẩn bị"); // Prepare - LSTR MSG_TUNE = _UxGT("Điều Chỉnh"); // Tune - LSTR MSG_PAUSE_PRINT = _UxGT("Tạm dừng in"); // Pause print - LSTR MSG_RESUME_PRINT = _UxGT("Tiếp tục in"); // Resume print - LSTR MSG_STOP_PRINT = _UxGT("Ngừng in"); // Stop print - LSTR MSG_OUTAGE_RECOVERY = _UxGT("Phục Hồi Mất Điện"); // Outage Recovery - LSTR MSG_MEDIA_MENU = _UxGT("In từ phương tiện"); // Print from media - LSTR MSG_NO_MEDIA = _UxGT("Không có phương tiện"); // No media - LSTR MSG_DWELL = _UxGT("Ngủ..."); // Sleep - LSTR MSG_USERWAIT = _UxGT("Nhấn để tiếp tục..."); // Click to resume (same as 'continue') - LSTR MSG_PRINT_PAUSED = _UxGT("In tạm dừng"); // print paused - LSTR MSG_PRINTING = _UxGT("Đang in..."); // printing - LSTR MSG_PRINT_ABORTED = _UxGT("In đã hủy bỏ"); // Print aborted - LSTR MSG_NO_MOVE = _UxGT("Không di chuyển."); // No move. + LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Cập Nhật"); // Refresh + LSTR MSG_INFO_SCREEN = _UxGT("Màn Hình Thông Tin"); // Info screen + LSTR MSG_PREPARE = _UxGT("Chuẩn bị"); // Prepare + LSTR MSG_TUNE = _UxGT("Điều Chỉnh"); // Tune + LSTR MSG_PAUSE_PRINT = _UxGT("Tạm dừng in"); // Pause print + LSTR MSG_RESUME_PRINT = _UxGT("Tiếp tục in"); // Resume print + LSTR MSG_STOP_PRINT = _UxGT("Ngừng in"); // Stop print + LSTR MSG_OUTAGE_RECOVERY = _UxGT("Phục Hồi Mất Điện"); // Outage Recovery + LSTR MSG_MEDIA_MENU = _UxGT("In từ phương tiện"); // Print from media + LSTR MSG_NO_MEDIA = _UxGT("Không có phương tiện"); // No media + LSTR MSG_DWELL = _UxGT("Ngủ..."); // Sleep + LSTR MSG_USERWAIT = _UxGT("Nhấn để tiếp tục..."); // Click to resume (same as 'continue') + LSTR MSG_PRINT_PAUSED = _UxGT("In tạm dừng"); // Print paused + LSTR MSG_PRINTING = _UxGT("Đang in..."); // Printing + LSTR MSG_PRINT_ABORTED = _UxGT("In đã hủy bỏ"); // Print aborted + LSTR MSG_NO_MOVE = _UxGT("Không di chuyển."); // No move. LSTR MSG_KILLED = _UxGT("ĐÃ CHẾT. "); LSTR MSG_STOPPED = _UxGT("ĐÃ NGỪNG. "); - LSTR MSG_CONTROL_RETRACT = _UxGT("Rút mm"); // Retract mm - LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Rút Trao.mm"); // Swap Re.mm + LSTR MSG_CONTROL_RETRACT = _UxGT("Rút mm"); // Retract mm + LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Rút Trao.mm"); // Swap Re.mm LSTR MSG_CONTROL_RETRACTF = _UxGT("Rút V"); - LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Nhảy mm"); // hop - LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("BỏRút mm"); // Unretr. mm - LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("BỏRút T mm"); // S Unretr. mm - LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("BỏRút V"); // UnRet V - LSTR MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("BỏRút T V"); // S UnRet V - LSTR MSG_AUTORETRACT = _UxGT("RútTựĐộng"); // Auto-Retract - LSTR MSG_FILAMENT_SWAP_LENGTH = _UxGT("Khoảng Cách Rút"); // Retract Distance - LSTR MSG_TOOL_CHANGE = _UxGT("Thay Đổi Công Cụ"); // Tool Change - LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Đưa Lên Z"); // Z Raise - LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Tốc Độ Tuôn Ra"); // Prime Speed - LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Tốc Độ Rút Lại"); // Retract Speed - LSTR MSG_FILAMENTCHANGE = _UxGT("Thay dây nhựa"); // change filament - LSTR MSG_FILAMENTCHANGE_E = _UxGT("Thay dây nhựa *"); // change filament - LSTR MSG_FILAMENTLOAD = _UxGT("Nạp dây nhựa"); // load filament - LSTR MSG_FILAMENTLOAD_E = _UxGT("Nạp dây nhựa *"); // load filament - LSTR MSG_FILAMENTUNLOAD = _UxGT("Dỡ dây nhựa"); // unload filament - LSTR MSG_FILAMENTUNLOAD_E = _UxGT("Dỡ dây nhựa *"); // unload filament - LSTR MSG_FILAMENTUNLOAD_ALL = _UxGT("Dỡ tất cả"); // Unload All - LSTR MSG_ATTACH_MEDIA = _UxGT("Khởi tạo phương tiện"); // Attach media - LSTR MSG_CHANGE_MEDIA = _UxGT("Thay phương tiện"); // Change midea + LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Nhảy mm"); // Hop + LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("BỏRút mm"); // Unretr. mm + LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("BỏRút T mm"); // S Unretr. mm + LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("BỏRút V"); // UnRet V + LSTR MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("BỏRút T V"); // S UnRet V + LSTR MSG_AUTORETRACT = _UxGT("RútTựĐộng"); // Auto-Retract + LSTR MSG_FILAMENT_SWAP_LENGTH = _UxGT("Khoảng Cách Rút"); // Retract Distance + LSTR MSG_TOOL_CHANGE = _UxGT("Thay Đổi Công Cụ"); // Tool Change + LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Đưa Lên Z"); // Z Raise + LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Tốc Độ Tuôn Ra"); // Prime Speed + LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Tốc Độ Rút Lại"); // Retract Speed + LSTR MSG_FILAMENTCHANGE = _UxGT("Thay dây nhựa"); // Change filament + LSTR MSG_FILAMENTCHANGE_E = _UxGT("Thay dây nhựa *"); // Change filament + LSTR MSG_FILAMENTLOAD = _UxGT("Nạp dây nhựa"); // Load filament + LSTR MSG_FILAMENTLOAD_E = _UxGT("Nạp dây nhựa *"); // Load filament + LSTR MSG_FILAMENTUNLOAD = _UxGT("Dỡ dây nhựa"); // Unload filament + LSTR MSG_FILAMENTUNLOAD_E = _UxGT("Dỡ dây nhựa *"); // Unload filament + LSTR MSG_FILAMENTUNLOAD_ALL = _UxGT("Dỡ tất cả"); // Unload All + LSTR MSG_ATTACH_MEDIA = _UxGT("Khởi tạo phương tiện"); // Attach media + LSTR MSG_CHANGE_MEDIA = _UxGT("Thay phương tiện"); // Change midea LSTR MSG_RELEASE_MEDIA = _UxGT("Phát hành phương tiện"); - LSTR MSG_ZPROBE_OUT = _UxGT("Đầu Dò Z qua bàn"); // Z Probe past bed - LSTR MSG_SKEW_FACTOR = _UxGT("Hệ số nghiêng"); // Skew Factor - LSTR MSG_BLTOUCH = _UxGT("BLTOUCH"); // BLTouch - LSTR MSG_BLTOUCH_SELFTEST = _UxGT("Tự kiểm tra BLTOUCH "); // BLTouch Self-Test - LSTR MSG_BLTOUCH_RESET = _UxGT("Bặt lại BLTouch"); // Reset BLTouch - LSTR MSG_BLTOUCH_DEPLOY = _UxGT("Đem BLTouch"); // Deploy BLTouch - LSTR MSG_BLTOUCH_STOW = _UxGT("Cất BLTouch"); // Stow BLTouch - LSTR MSG_MANUAL_DEPLOY = _UxGT("Đem Đầu Dò-Z"); // Deploy Z-Probe - LSTR MSG_MANUAL_STOW = _UxGT("Cất Đầu Dò-Z"); // Stow Z-Probe + LSTR MSG_ZPROBE_OUT = _UxGT("Đầu Dò Z qua bàn"); // Z Probe past bed + LSTR MSG_SKEW_FACTOR = _UxGT("Hệ số nghiêng"); // Skew Factor + LSTR MSG_BLTOUCH = _UxGT("BLTOUCH"); // BLTouch + LSTR MSG_BLTOUCH_SELFTEST = _UxGT("Tự kiểm tra BLTOUCH "); // BLTouch Self-Test + LSTR MSG_BLTOUCH_RESET = _UxGT("Bặt lại BLTouch"); // Reset BLTouch + LSTR MSG_BLTOUCH_DEPLOY = _UxGT("Đem BLTouch"); // Deploy BLTouch + LSTR MSG_BLTOUCH_STOW = _UxGT("Cất BLTouch"); // Stow BLTouch + LSTR MSG_MANUAL_DEPLOY = _UxGT("Đem Đầu Dò-Z"); // Deploy Z-Probe + LSTR MSG_MANUAL_STOW = _UxGT("Cất Đầu Dò-Z"); // Stow Z-Probe LSTR MSG_HOME_FIRST = _UxGT("Về nhà %s Trước"); - LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Đầu Dò Bù Đắp Z"); // Probe Z Offset - LSTR MSG_BABYSTEP_X = _UxGT("Nhít X"); // Babystep X + LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Đầu Dò Bù Đắp Z"); // Probe Z Offset + LSTR MSG_BABYSTEP_X = _UxGT("Nhít X"); // Babystep X LSTR MSG_BABYSTEP_Y = _UxGT("Nhít Y"); LSTR MSG_BABYSTEP_Z = _UxGT("Nhít Z"); LSTR MSG_BABYSTEP_N = _UxGT("Nhít @"); - LSTR MSG_ENDSTOP_ABORT = _UxGT("Hủy bỏ công tắc"); // Endstop abort - LSTR MSG_HEATING_FAILED_LCD = _UxGT("Sưởi đầu phun không thành công"); // Heating failed - LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("Điều sai: nhiệt độ dư"); // Err: REDUNDANT TEMP - LSTR MSG_THERMAL_RUNAWAY = _UxGT("Vấn đề nhiệt"); // THERMAL RUNAWAY | problem - LSTR MSG_THERMAL_RUNAWAY_BED = _UxGT("Vấn đề nhiệt bàn"); // BED THERMAL RUNAWAY - LSTR MSG_ERR_MAXTEMP = _UxGT("Điều sai: nhiệt độ tối đa"); // Err: MAXTEMP - LSTR MSG_ERR_MINTEMP = _UxGT("Điều sai: nhiệt độ tối thiểu"); // Err: MINTEMP - LSTR MSG_HALTED = _UxGT("MÁY IN ĐÃ DỪNG LẠI"); // PRINTER HALTED - LSTR MSG_PLEASE_RESET = _UxGT("Xin bặt lại"); // Please reset - LSTR MSG_HEATING = _UxGT("Đang sưởi nóng..."); // heating - LSTR MSG_COOLING = _UxGT("Đang làm nguội..."); // cooling - LSTR MSG_BED_HEATING = _UxGT("Đang sưởi nong bàn..."); // bed heating - LSTR MSG_BED_COOLING = _UxGT("Đang làm nguội bàn..."); // bed cooling - LSTR MSG_DELTA_CALIBRATE = _UxGT("Cân Chỉnh Delta"); // Delta calibration + LSTR MSG_ENDSTOP_ABORT = _UxGT("Hủy bỏ công tắc"); // Endstop abort + LSTR MSG_HEATING_FAILED_LCD = _UxGT("Sưởi đầu phun không thành công"); // Heating failed + LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("Điều sai: nhiệt độ dư"); // Err: REDUNDANT TEMP + LSTR MSG_THERMAL_RUNAWAY = _UxGT("Vấn đề nhiệt"); // THERMAL RUNAWAY | problem + LSTR MSG_THERMAL_RUNAWAY_BED = _UxGT("Vấn đề nhiệt bàn"); // BED THERMAL RUNAWAY + LSTR MSG_ERR_MAXTEMP = _UxGT("Điều sai: nhiệt độ tối đa"); // Err: MAXTEMP + LSTR MSG_ERR_MINTEMP = _UxGT("Điều sai: nhiệt độ tối thiểu"); // Err: MINTEMP + LSTR MSG_HALTED = _UxGT("MÁY IN ĐÃ DỪNG LẠI"); // PRINTER HALTED + LSTR MSG_PLEASE_RESET = _UxGT("Xin bặt lại"); // Please reset + LSTR MSG_HEATING = _UxGT("Đang sưởi nóng..."); // Heating + LSTR MSG_COOLING = _UxGT("Đang làm nguội..."); // Cooling + LSTR MSG_BED_HEATING = _UxGT("Đang sưởi nong bàn..."); // Bed heating + LSTR MSG_BED_COOLING = _UxGT("Đang làm nguội bàn..."); // Bed cooling + LSTR MSG_DELTA_CALIBRATE = _UxGT("Cân Chỉnh Delta"); // Delta calibration LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Chỉnh X lại"); LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Chỉnh Y lại"); LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("Chỉnh Z lại"); - LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("Chỉnh Z Center"); // Calibrate Center - LSTR MSG_DELTA_SETTINGS = _UxGT("Cài Đặt Delta"); // Delta Settings - LSTR MSG_DELTA_AUTO_CALIBRATE = _UxGT("Cân Chỉnh Tự Động"); // Auto Calibration - LSTR MSG_DELTA_DIAG_ROD = _UxGT("Gậy Chéo"); // Diag Rod - LSTR MSG_DELTA_HEIGHT = _UxGT("Chiều Cao"); // Height - LSTR MSG_DELTA_RADIUS = _UxGT("Bán Kính"); // Radius + LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("Chỉnh Z Center"); // Calibrate Center + LSTR MSG_DELTA_SETTINGS = _UxGT("Cài Đặt Delta"); // Delta Settings + LSTR MSG_DELTA_AUTO_CALIBRATE = _UxGT("Cân Chỉnh Tự Động"); // Auto Calibration + LSTR MSG_DELTA_DIAG_ROD = _UxGT("Gậy Chéo"); // Diag Rod + LSTR MSG_DELTA_HEIGHT = _UxGT("Chiều Cao"); // Height + LSTR MSG_DELTA_RADIUS = _UxGT("Bán Kính"); // Radius LSTR MSG_INFO_MENU = _UxGT("Về Máy In"); - LSTR MSG_INFO_PRINTER_MENU = _UxGT("Thông Tin Máy In"); // Printer Info - LSTR MSG_3POINT_LEVELING = _UxGT("San lấp 3-Điểm"); // 3-Point Leveling - LSTR MSG_LINEAR_LEVELING = _UxGT("San Lấp Tuyến Tính"); // Linear Leveling - LSTR MSG_BILINEAR_LEVELING = _UxGT("San Lấp Song Tuyến"); // Bilinear Leveling - LSTR MSG_UBL_LEVELING = _UxGT("San Lấp Bàn Thống Nhất"); // Unified Bed Leveling - LSTR MSG_MESH_LEVELING = _UxGT("Lưới San Lấp"); // Mesh Leveling - LSTR MSG_INFO_STATS_MENU = _UxGT("Thống Kê Máy In"); // Printer Stats - LSTR MSG_INFO_BOARD_MENU = _UxGT("Thông Tin Bo Mạch"); // Board Info - LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Điện Trở Nhiệt"); // Thermistors - LSTR MSG_INFO_EXTRUDERS = _UxGT("Máy đùn"); // Extruders - LSTR MSG_INFO_BAUDRATE = _UxGT("Baud"); // Baud - LSTR MSG_INFO_PROTOCOL = _UxGT("Giao Thức"); // Protocol - LSTR MSG_CASE_LIGHT = _UxGT("Đèn Khuông"); // Case light - LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Độ Sáng"); // Light Brightness + LSTR MSG_INFO_PRINTER_MENU = _UxGT("Thông Tin Máy In"); // Printer Info + LSTR MSG_3POINT_LEVELING = _UxGT("San lấp 3-Điểm"); // 3-Point Leveling + LSTR MSG_LINEAR_LEVELING = _UxGT("San Lấp Tuyến Tính"); // Linear Leveling + LSTR MSG_BILINEAR_LEVELING = _UxGT("San Lấp Song Tuyến"); // Bilinear Leveling + LSTR MSG_UBL_LEVELING = _UxGT("San Lấp Bàn Thống Nhất"); // Unified Bed Leveling + LSTR MSG_MESH_LEVELING = _UxGT("Lưới San Lấp"); // Mesh Leveling + LSTR MSG_INFO_STATS_MENU = _UxGT("Thống Kê Máy In"); // Printer Stats + LSTR MSG_INFO_BOARD_MENU = _UxGT("Thông Tin Bo Mạch"); // Board Info + LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Điện Trở Nhiệt"); // Thermistors + LSTR MSG_INFO_EXTRUDERS = _UxGT("Máy đùn"); // Extruders + LSTR MSG_INFO_BAUDRATE = _UxGT("Baud"); // Baud + LSTR MSG_INFO_PROTOCOL = _UxGT("Giao Thức"); // Protocol + LSTR MSG_CASE_LIGHT = _UxGT("Đèn Khuông"); // Case light + LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Độ Sáng"); // Light Brightness #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2 - LSTR MSG_INFO_PRINT_COUNT = _UxGT("Số In"); // Print Count + LSTR MSG_INFO_PRINT_COUNT = _UxGT("Số In"); // Print Count LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Đã hoàn thành"); - LSTR MSG_INFO_PRINT_TIME = _UxGT("Tổng số thời gian in"); // Total print time - LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Thời gian việc lâu nhất"); // Longest job time - LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Tổng số đùn"); // Extruded total + LSTR MSG_INFO_PRINT_TIME = _UxGT("Tổng số thời gian in"); // Total print time + LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Thời gian việc lâu nhất"); // Longest job time + LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Tổng số đùn"); // Extruded total #else - LSTR MSG_INFO_PRINT_COUNT = _UxGT("In"); // prints - LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Đã hoàn thành"); // Completed - LSTR MSG_INFO_PRINT_TIME = _UxGT("Tổng số"); // total - LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Dài nhất"); // Longest + LSTR MSG_INFO_PRINT_COUNT = _UxGT("In"); // Prints + LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Đã hoàn thành"); // Completed + LSTR MSG_INFO_PRINT_TIME = _UxGT("Tổng số"); // Total + LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Dài nhất"); // Longest LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Đã ép đùn"); #endif - LSTR MSG_INFO_MIN_TEMP = _UxGT("Nhiệt độ tối thiểu"); // Min Temp - LSTR MSG_INFO_MAX_TEMP = _UxGT("Nhiệt độ tối đa"); // Max temp - LSTR MSG_INFO_PSU = _UxGT("Bộ nguồn"); // PSU - LSTR MSG_DRIVE_STRENGTH = _UxGT("Sức mạnh ổ đĩa"); // Drive Strength + LSTR MSG_INFO_MIN_TEMP = _UxGT("Nhiệt độ tối thiểu"); // Min Temp + LSTR MSG_INFO_MAX_TEMP = _UxGT("Nhiệt độ tối đa"); // Max temp + LSTR MSG_INFO_PSU = _UxGT("Bộ nguồn"); // PSU + LSTR MSG_DRIVE_STRENGTH = _UxGT("Sức mạnh ổ đĩa"); // Drive Strength LSTR MSG_DAC_PERCENT_N = _UxGT("@ % trình điều khiển"); - LSTR MSG_DAC_EEPROM_WRITE = _UxGT("Ghi DAC EEPROM"); // DAC EEPROM Write - LSTR MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("In tạm dừng"); // PRINT PAUSED + LSTR MSG_DAC_EEPROM_WRITE = _UxGT("Ghi DAC EEPROM"); // DAC EEPROM Write + LSTR MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("In tạm dừng"); // PRINT PAUSED LSTR MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("Nạp dây nhựa"); - LSTR MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("Dỡ dây nhựa"); // unload filament - LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("Tùy chọn hồi phục:"); // RESUME OPTIONS - LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Xả thêm"); // Purge more - LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Tiếp tục"); // continue - LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Đầu Phun: "); // Nozzle - LSTR MSG_RUNOUT_SENSOR_ENABLE = _UxGT("Cảm Biến Hết"); // Runout Sensor - LSTR MSG_KILL_HOMING_FAILED = _UxGT("Sự nhà không thành công"); // Homing failed - LSTR MSG_LCD_PROBING_FAILED = _UxGT(" không thành công"); // Probing failed + LSTR MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("Dỡ dây nhựa"); // Unload filament + LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("Tùy chọn hồi phục:"); // RESUME OPTIONS + LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Xả thêm"); // Purge more + LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Tiếp tục"); // Continue + LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Đầu Phun: "); // Nozzle + LSTR MSG_RUNOUT_SENSOR_ENABLE = _UxGT("Cảm Biến Hết"); // Runout Sensor + LSTR MSG_KILL_HOMING_FAILED = _UxGT("Sự nhà không thành công"); // Homing failed + LSTR MSG_LCD_PROBING_FAILED = _UxGT(" không thành công"); // Probing failed // // Filament Change screens show up to 3 lines on a 4-line display @@ -406,36 +406,37 @@ namespace Language_vi { // #if LCD_HEIGHT >= 4 LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("Nhấn nút", "để tiếp tục in")); // Press button to resume print - LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Chờ cho sự", "thay đổi dây nhựa", "bắt đầu")); // wait for filament change to start - LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Đút dây nhựa vào", "và nhấn nút", "để tiếp tục")); // insert filament and press button to continue // + LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Chờ cho sự", "thay đổi dây nhựa", "bắt đầu")); // Wait for filament change to start + LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Đút dây nhựa vào", "và nhấn nút", "để tiếp tục")); // Insert filament and press button to continue // LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Nhấn nút", "để làm nóng đầu phun")); // Press button to heat nozzle LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Đầu phun đang nóng lên", "Xin chờ...")); // Nozzle heating Please wait - LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Chờ tro", "dây nhựa ra")); // Wait for filament unload - LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Chờ tro", "dây nhựa vào")); // Wait for filament load - LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("Chờ tro", "xả dây nhựa")); // wait for filament purge + LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Chờ tro", "dây nhựa ra")); // Wait for filament unload + LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Chờ tro", "dây nhựa vào")); // Wait for filament load + LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("Chờ tro", "xả dây nhựa")); // Wait for filament purge LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("Nhấn nút để kết thúc", "xả dây nhựa")); // Click to finish dây nhựa purge LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Chờ tro in", "tiếp tục...")); // Wait for print to resume #else // LCD_HEIGHT < 4 - LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("Nhấn nút để tiếp tục")); // Click to continue + LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("Nhấn nút để tiếp tục")); // Click to continue LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("Xin chờ...")); - LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Chèn và nhấn")); // Insert and Click - LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("Nhấn để sưởi")); // Click to heat - LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Đang sưởi nóng")); // Heating - LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Đang dỡ ra...")); // Ejecting - LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Đang nạp...")); // Loading - LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("Đang xả...")); // Purging - LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("Nhấn nút để kết thúc")); // Click to finish - LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Đang tiếp tục...")); // Resuming + LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Chèn và nhấn")); // Insert and Click + LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("Nhấn để sưởi")); // Click to heat + LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Đang sưởi nóng")); // Heating + LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Đang dỡ ra...")); // Ejecting + LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Đang nạp...")); // Loading + LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("Đang xả...")); // Purging + LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("Nhấn nút để kết thúc")); // Click to finish + LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Đang tiếp tục...")); // Resuming #endif // LCD_HEIGHT < 4 - LSTR MSG_TMC_DRIVERS = _UxGT("Trình điều khiển TMC"); // TMC drivers - LSTR MSG_TMC_CURRENT = _UxGT("Dòng điện trình điều khiển"); // Driver current - LSTR MSG_TMC_HYBRID_THRS = _UxGT("Ngưỡng Hỗn Hợp"); // Hybrid threshold - LSTR MSG_TMC_HOMING_THRS = _UxGT("Vô cảm biến"); // Sensorless homing - LSTR MSG_TMC_STEPPING_MODE = _UxGT("Chế độ từng bước"); // Stepping mode - LSTR MSG_TMC_STEALTH_ENABLED = _UxGT("CắtTàngHình được kích hoạt"); // StealthChop enabled + LSTR MSG_TMC_DRIVERS = _UxGT("Trình điều khiển TMC"); // TMC drivers + LSTR MSG_TMC_CURRENT = _UxGT("Dòng điện trình điều khiển"); // Driver current + LSTR MSG_TMC_HYBRID_THRS = _UxGT("Ngưỡng Hỗn Hợp"); // Hybrid threshold + LSTR MSG_TMC_HOMING_THRS = _UxGT("Vô cảm biến"); // Sensorless homing + LSTR MSG_TMC_STEPPING_MODE = _UxGT("Chế độ từng bước"); // Stepping mode + LSTR MSG_TMC_STEALTH_ENABLED = _UxGT("CắtTàngHình được kích hoạt"); // StealthChop enabled - LSTR MSG_SHORT_DAY = _UxGT("n"); // d - ngày - One character only - LSTR MSG_SHORT_HOUR = _UxGT("g"); // h - giờ - One character only - LSTR MSG_SHORT_MINUTE = _UxGT("p"); // m - phút - One character only + LSTR MSG_SHORT_DAY = _UxGT("n"); // d - ngày - One character only + LSTR MSG_SHORT_HOUR = _UxGT("g"); // h - giờ - One character only + LSTR MSG_SHORT_MINUTE = _UxGT("p"); // m - phút - One character only + LSTR MSG_SHORT_MINUTE = _UxGT("p"); // M - phút - One character only } diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index 7acd0d8e8f..03c8d80bca 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -28,88 +28,88 @@ * See also https://marlinfw.org/docs/development/lcd_language.html */ namespace Language_zh_CN { - using namespace Language_en; // Inherit undefined strings from English + using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 3; LSTR LANGUAGE = _UxGT("Simplified Chinese"); - LSTR WELCOME_MSG = MACHINE_NAME _UxGT("已就绪."); // " ready." + LSTR WELCOME_MSG = MACHINE_NAME _UxGT("已就绪."); // " ready." LSTR MSG_MARLIN = _UxGT("马林"); LSTR MSG_YES = _UxGT("是"); LSTR MSG_NO = _UxGT("否"); - LSTR MSG_BACK = _UxGT("返回"); // ”Back“ + LSTR MSG_BACK = _UxGT("返回"); // ”Back“ LSTR MSG_MEDIA_ABORTING = _UxGT("放弃中..."); - LSTR MSG_MEDIA_INSERTED = _UxGT("存储卡已插入"); // "Card inserted" - LSTR MSG_MEDIA_REMOVED = _UxGT("存储卡被拔出"); // "Card removed" + LSTR MSG_MEDIA_INSERTED = _UxGT("存储卡已插入"); // "Card inserted" + LSTR MSG_MEDIA_REMOVED = _UxGT("存储卡被拔出"); // "Card removed" LSTR MSG_MEDIA_WAITING = _UxGT("等待存储器"); LSTR MSG_MEDIA_READ_ERROR = _UxGT("存储器读取错误"); LSTR MSG_MEDIA_USB_REMOVED = _UxGT("USB设备已弹出"); LSTR MSG_MEDIA_USB_FAILED = _UxGT("USB启动错误"); LSTR MSG_KILL_SUBCALL_OVERFLOW = _UxGT("子响应溢出"); - LSTR MSG_LCD_ENDSTOPS = _UxGT("挡块"); // "Endstops" // Max length 8 characters + LSTR MSG_LCD_ENDSTOPS = _UxGT("挡块"); // "Endstops" // Max length 8 characters LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("软挡块"); - LSTR MSG_MAIN_MENU = _UxGT("主菜单"); // "Main" + LSTR MSG_MAIN_MENU = _UxGT("主菜单"); // "Main" LSTR MSG_ADVANCED_SETTINGS = _UxGT("高级设置"); LSTR MSG_CONFIGURATION = _UxGT("配置"); - LSTR MSG_RUN_AUTO_FILES = _UxGT("自动开始"); // "Autostart" - LSTR MSG_DISABLE_STEPPERS = _UxGT("关闭步进电机"); // "Disable steppers" - LSTR MSG_DEBUG_MENU = _UxGT("调试菜单"); // "Debug Menu" - LSTR MSG_PROGRESS_BAR_TEST = _UxGT("进度条测试"); // "Progress Bar Test" + LSTR MSG_RUN_AUTO_FILES = _UxGT("自动开始"); // "Autostart" + LSTR MSG_DISABLE_STEPPERS = _UxGT("关闭步进电机"); // "Disable steppers" + LSTR MSG_DEBUG_MENU = _UxGT("调试菜单"); // "Debug Menu" + LSTR MSG_PROGRESS_BAR_TEST = _UxGT("进度条测试"); // "Progress Bar Test" LSTR MSG_HOMING = _UxGT("回原点"); - LSTR MSG_AUTO_HOME = _UxGT("自动回原点"); // "Auto home" - LSTR MSG_AUTO_HOME_X = _UxGT("回X原位"); // "Home X" - LSTR MSG_AUTO_HOME_Y = _UxGT("回Y原位"); // "Home Y" - LSTR MSG_AUTO_HOME_Z = _UxGT("回Z原位"); // "Home Z" + LSTR MSG_AUTO_HOME = _UxGT("自动回原点"); // "Auto home" + LSTR MSG_AUTO_HOME_X = _UxGT("回X原位"); // "Home X" + LSTR MSG_AUTO_HOME_Y = _UxGT("回Y原位"); // "Home Y" + LSTR MSG_AUTO_HOME_Z = _UxGT("回Z原位"); // "Home Z" LSTR MSG_AUTO_Z_ALIGN = _UxGT("自动Z对齐"); - LSTR MSG_LEVEL_BED_HOMING = _UxGT("平台调平XYZ归原位"); // "Homing XYZ" - LSTR MSG_LEVEL_BED_WAITING = _UxGT("单击开始热床调平"); // "Click to Begin" - LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("下个热床调平点"); // "Next Point" - LSTR MSG_LEVEL_BED_DONE = _UxGT("完成热床调平"); // "Leveling Done!" - LSTR MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height" - LSTR MSG_SET_HOME_OFFSETS = _UxGT("设置原点偏移"); // "Set home offsets" - LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已启用"); // "Offsets applied" + LSTR MSG_LEVEL_BED_HOMING = _UxGT("平台调平XYZ归原位"); // "Homing XYZ" + LSTR MSG_LEVEL_BED_WAITING = _UxGT("单击开始热床调平"); // "Click to Begin" + LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("下个热床调平点"); // "Next Point" + LSTR MSG_LEVEL_BED_DONE = _UxGT("完成热床调平"); // "Leveling Done!" + LSTR MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height" + LSTR MSG_SET_HOME_OFFSETS = _UxGT("设置原点偏移"); // "Set home offsets" + LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已启用"); // "Offsets applied" #if HAS_PREHEAT - LSTR MSG_PREHEAT_1 = _UxGT("预热 ") PREHEAT_1_LABEL; // "Preheat PREHEAT_2_LABEL" - LSTR MSG_PREHEAT_1_H = _UxGT("预热 ") PREHEAT_1_LABEL " ~"; // "Preheat PREHEAT_2_LABEL" - LSTR MSG_PREHEAT_1_END = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴"); //MSG_PREHEAT_1 " " - LSTR MSG_PREHEAT_1_END_E = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ~"); //MSG_PREHEAT_1 " " - LSTR MSG_PREHEAT_1_ALL = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All" - LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 热床"); //MSG_PREHEAT_1 " Bed" - LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 设置"); //MSG_PREHEAT_1 " conf" + LSTR MSG_PREHEAT_1 = _UxGT("预热 ") PREHEAT_1_LABEL; // "Preheat PREHEAT_2_LABEL" + LSTR MSG_PREHEAT_1_H = _UxGT("预热 ") PREHEAT_1_LABEL " ~"; // "Preheat PREHEAT_2_LABEL" + LSTR MSG_PREHEAT_1_END = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴"); //MSG_PREHEAT_1 " " + LSTR MSG_PREHEAT_1_END_E = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ~"); //MSG_PREHEAT_1 " " + LSTR MSG_PREHEAT_1_ALL = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All" + LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 热床"); //MSG_PREHEAT_1 " Bed" + LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 设置"); //MSG_PREHEAT_1 " conf" - LSTR MSG_PREHEAT_M = _UxGT("预热 $"); // "Preheat PREHEAT_2_LABEL" - LSTR MSG_PREHEAT_M_H = _UxGT("预热 $ ~"); // "Preheat PREHEAT_2_LABEL" - LSTR MSG_PREHEAT_M_END = _UxGT("预热 $ 喷嘴"); //MSG_PREHEAT_1 " " - LSTR MSG_PREHEAT_M_END_E = _UxGT("预热 $ 喷嘴 ~"); //MSG_PREHEAT_1 " " - LSTR MSG_PREHEAT_M_ALL = _UxGT("预热 $ 全部"); //MSG_PREHEAT_1 " All" - LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("预热 $ 热床"); //MSG_PREHEAT_1 " Bed" - LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("预热 $ 设置"); //MSG_PREHEAT_1 " conf" + LSTR MSG_PREHEAT_M = _UxGT("预热 $"); // "Preheat PREHEAT_2_LABEL" + LSTR MSG_PREHEAT_M_H = _UxGT("预热 $ ~"); // "Preheat PREHEAT_2_LABEL" + LSTR MSG_PREHEAT_M_END = _UxGT("预热 $ 喷嘴"); //MSG_PREHEAT_1 " " + LSTR MSG_PREHEAT_M_END_E = _UxGT("预热 $ 喷嘴 ~"); //MSG_PREHEAT_1 " " + LSTR MSG_PREHEAT_M_ALL = _UxGT("预热 $ 全部"); //MSG_PREHEAT_1 " All" + LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("预热 $ 热床"); //MSG_PREHEAT_1 " Bed" + LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("预热 $ 设置"); //MSG_PREHEAT_1 " conf" #endif LSTR MSG_PREHEAT_CUSTOM = _UxGT("预热自定义"); - LSTR MSG_COOLDOWN = _UxGT("降温"); // "Cooldown" + LSTR MSG_COOLDOWN = _UxGT("降温"); // "Cooldown" LSTR MSG_CUTTER_FREQUENCY = _UxGT("切割频率"); LSTR MSG_LASER_MENU = _UxGT("激光控制"); LSTR MSG_LASER_POWER = _UxGT("激光电源"); LSTR MSG_SPINDLE_MENU = _UxGT("主轴控制"); LSTR MSG_SPINDLE_POWER = _UxGT("主轴电源"); LSTR MSG_SPINDLE_REVERSE = _UxGT("主轴反转"); - LSTR MSG_SWITCH_PS_ON = _UxGT("开启电源"); // "Switch power on" - LSTR MSG_SWITCH_PS_OFF = _UxGT("关闭电源"); // "Switch power off" - LSTR MSG_EXTRUDE = _UxGT("挤出"); // "Extrude" - LSTR MSG_RETRACT = _UxGT("回抽"); // "Retract" - LSTR MSG_MOVE_AXIS = _UxGT("移动轴"); // "Move axis" - LSTR MSG_BED_LEVELING = _UxGT("调平热床"); // "Bed leveling" - LSTR MSG_LEVEL_BED = _UxGT("调平热床"); // "Level bed" - LSTR MSG_BED_TRAMMING = _UxGT("调平边角"); // "Bed Tramming" - LSTR MSG_NEXT_CORNER = _UxGT("下个边角"); // "Next corner" + LSTR MSG_SWITCH_PS_ON = _UxGT("开启电源"); // "Switch power on" + LSTR MSG_SWITCH_PS_OFF = _UxGT("关闭电源"); // "Switch power off" + LSTR MSG_EXTRUDE = _UxGT("挤出"); // "Extrude" + LSTR MSG_RETRACT = _UxGT("回抽"); // "Retract" + LSTR MSG_MOVE_AXIS = _UxGT("移动轴"); // "Move axis" + LSTR MSG_BED_LEVELING = _UxGT("调平热床"); // "Bed leveling" + LSTR MSG_LEVEL_BED = _UxGT("调平热床"); // "Level bed" + LSTR MSG_BED_TRAMMING = _UxGT("调平边角"); // "Bed Tramming" + LSTR MSG_NEXT_CORNER = _UxGT("下个边角"); // "Next corner" LSTR MSG_MESH_EDITOR = _UxGT("网格编辑器"); - LSTR MSG_EDIT_MESH = _UxGT("编辑网格"); // "Edit Mesh" - LSTR MSG_EDITING_STOPPED = _UxGT("网格编辑已停止"); // "Mesh Editing Stopped" + LSTR MSG_EDIT_MESH = _UxGT("编辑网格"); // "Edit Mesh" + LSTR MSG_EDITING_STOPPED = _UxGT("网格编辑已停止"); // "Mesh Editing Stopped" LSTR MSG_PROBING_POINT = _UxGT("探测点"); LSTR MSG_MESH_X = _UxGT("索引X"); LSTR MSG_MESH_Y = _UxGT("索引Y"); LSTR MSG_MESH_EDIT_Z = _UxGT("Z 值"); - LSTR MSG_CUSTOM_COMMANDS = _UxGT("定制命令"); // "Custom Commands" + LSTR MSG_CUSTOM_COMMANDS = _UxGT("定制命令"); // "Custom Commands" LSTR MSG_M48_TEST = _UxGT("M48探测"); LSTR MSG_M48_POINT = _UxGT("M48点"); LSTR MSG_M48_DEVIATION = _UxGT("M48偏差"); @@ -121,36 +121,36 @@ namespace Language_zh_CN { LSTR MSG_IDEX_MODE_FULL_CTRL = _UxGT("完全控制"); LSTR MSG_HOTEND_OFFSET_Z = _UxGT("第二喷头是Z"); LSTR MSG_HOTEND_OFFSET_A = _UxGT("第二喷头是@"); - LSTR MSG_UBL_DOING_G29 = _UxGT("执行G29"); // "Doing G29" - LSTR MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools" - LSTR MSG_UBL_LEVEL_BED = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling" + LSTR MSG_UBL_DOING_G29 = _UxGT("执行G29"); // "Doing G29" + LSTR MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools" + LSTR MSG_UBL_LEVEL_BED = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling" LSTR MSG_LCD_TILTING_MESH = _UxGT("倾斜點"); - LSTR MSG_UBL_MANUAL_MESH = _UxGT("手工创设网格"); // "Manually Build Mesh" - LSTR MSG_UBL_BC_INSERT = _UxGT("放置垫片并测量"); // "Place shim & measure" - LSTR MSG_UBL_BC_INSERT2 = _UxGT("测量"); // "Measure" - LSTR MSG_UBL_BC_REMOVE = _UxGT("移除并测量热床"); // "Remove & measure bed" - LSTR MSG_UBL_MOVING_TO_NEXT = _UxGT("移动到下一个"); // "Moving to next" - LSTR MSG_UBL_ACTIVATE_MESH = _UxGT("激活UBL"); // "Activate UBL" - LSTR MSG_UBL_DEACTIVATE_MESH = _UxGT("关闭UBL"); // "Deactivate UBL" - LSTR MSG_UBL_SET_TEMP_BED = _UxGT("热床温度"); // "Bed Temp" + LSTR MSG_UBL_MANUAL_MESH = _UxGT("手工创设网格"); // "Manually Build Mesh" + LSTR MSG_UBL_BC_INSERT = _UxGT("放置垫片并测量"); // "Place shim & measure" + LSTR MSG_UBL_BC_INSERT2 = _UxGT("测量"); // "Measure" + LSTR MSG_UBL_BC_REMOVE = _UxGT("移除并测量热床"); // "Remove & measure bed" + LSTR MSG_UBL_MOVING_TO_NEXT = _UxGT("移动到下一个"); // "Moving to next" + LSTR MSG_UBL_ACTIVATE_MESH = _UxGT("激活UBL"); // "Activate UBL" + LSTR MSG_UBL_DEACTIVATE_MESH = _UxGT("关闭UBL"); // "Deactivate UBL" + LSTR MSG_UBL_SET_TEMP_BED = _UxGT("热床温度"); // "Bed Temp" LSTR MSG_UBL_BED_TEMP_CUSTOM = _UxGT("热床温度"); - LSTR MSG_UBL_SET_TEMP_HOTEND = _UxGT("热端温度"); // "Hotend Temp" + LSTR MSG_UBL_SET_TEMP_HOTEND = _UxGT("热端温度"); // "Hotend Temp" LSTR MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("热端温度"); - LSTR MSG_UBL_MESH_EDIT = _UxGT("网格编辑"); // "Mesh Edit" - LSTR MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("编辑客户网格"); // "Edit Custom Mesh" - LSTR MSG_UBL_FINE_TUNE_MESH = _UxGT("细调网格"); // "Fine Tuning Mesh" - LSTR MSG_UBL_DONE_EDITING_MESH = _UxGT("完成编辑网格"); // "Done Editing Mesh" - LSTR MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("创设客户网格"); // "Build Custom Mesh" - LSTR MSG_UBL_BUILD_MESH_MENU = _UxGT("创设网格"); // "Build Mesh" + LSTR MSG_UBL_MESH_EDIT = _UxGT("网格编辑"); // "Mesh Edit" + LSTR MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("编辑客户网格"); // "Edit Custom Mesh" + LSTR MSG_UBL_FINE_TUNE_MESH = _UxGT("细调网格"); // "Fine Tuning Mesh" + LSTR MSG_UBL_DONE_EDITING_MESH = _UxGT("完成编辑网格"); // "Done Editing Mesh" + LSTR MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("创设客户网格"); // "Build Custom Mesh" + LSTR MSG_UBL_BUILD_MESH_MENU = _UxGT("创设网格"); // "Build Mesh" #if HAS_PREHEAT - LSTR MSG_UBL_BUILD_MESH_M = _UxGT("创设 $ 网格"); // "Build PREHEAT_1_LABEL Mesh" - LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("批准 $ 网格"); // "Validate PREHEAT_1_LABEL Mesh" + LSTR MSG_UBL_BUILD_MESH_M = _UxGT("创设 $ 网格"); // "Build PREHEAT_1_LABEL Mesh" + LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("批准 $ 网格"); // "Validate PREHEAT_1_LABEL Mesh" #endif - LSTR MSG_UBL_BUILD_COLD_MESH = _UxGT("创设冷网格"); // "Build Cold Mesh" - LSTR MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("调整网格高度"); // "Adjust Mesh Height" - LSTR MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("高度合计"); // "Height Amount" - LSTR MSG_UBL_VALIDATE_MESH_MENU = _UxGT("批准网格"); // "Validate Mesh" - LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客户网格"); // "Validate Custom Mesh" + LSTR MSG_UBL_BUILD_COLD_MESH = _UxGT("创设冷网格"); // "Build Cold Mesh" + LSTR MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("调整网格高度"); // "Adjust Mesh Height" + LSTR MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("高度合计"); // "Height Amount" + LSTR MSG_UBL_VALIDATE_MESH_MENU = _UxGT("批准网格"); // "Validate Mesh" + LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客户网格"); // "Validate Custom Mesh" LSTR MSG_G26_HEATING_BED = _UxGT("G26加热热床"); LSTR MSG_G26_HEATING_NOZZLE = _UxGT("G26加热喷嘴"); LSTR MSG_G26_MANUAL_PRIME = _UxGT("手动填装中..."); @@ -158,38 +158,38 @@ namespace Language_zh_CN { LSTR MSG_G26_PRIME_DONE = _UxGT("填装完成"); LSTR MSG_G26_CANCELED = _UxGT("G26已取消"); LSTR MSG_G26_LEAVING = _UxGT("离开G26"); - LSTR MSG_UBL_CONTINUE_MESH = _UxGT("继续热床网格"); // "Continue Bed Mesh" - LSTR MSG_UBL_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling" - LSTR MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三点调平"); // "3-Point Leveling" - LSTR MSG_UBL_GRID_MESH_LEVELING = _UxGT("格子网格调平"); // "Grid Mesh Leveling" - LSTR MSG_UBL_MESH_LEVEL = _UxGT("调平网格"); // "Level Mesh" - LSTR MSG_UBL_SIDE_POINTS = _UxGT("边点"); // "Side Points" - LSTR MSG_UBL_MAP_TYPE = _UxGT("图类型"); // "Map Type" - LSTR MSG_UBL_OUTPUT_MAP = _UxGT("输出网格图"); // "Output Mesh Map" - LSTR MSG_UBL_OUTPUT_MAP_HOST = _UxGT("输出到主机"); // "Output for Host" - LSTR MSG_UBL_OUTPUT_MAP_CSV = _UxGT("输出到CSV"); // "Output for CSV" - LSTR MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("输出到备份"); // "Off Printer Backup" - LSTR MSG_UBL_INFO_UBL = _UxGT("输出UBL信息"); // "Output UBL Info" - LSTR MSG_UBL_FILLIN_AMOUNT = _UxGT("填充合计"); // "Fill-in Amount" - LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("手工填充"); // "Manual Fill-in" - LSTR MSG_UBL_SMART_FILLIN = _UxGT("聪明填充"); // "Smart Fill-in" - LSTR MSG_UBL_FILLIN_MESH = _UxGT("填充网格"); // "Fill-in Mesh" - LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("作废所有的"); // "Invalidate All" - LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("作废最近的"); // "Invalidate Closest" - LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("细调所有的"); // "Fine Tune All" - LSTR MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("细调最近的"); // "Fine Tune Closest" - LSTR MSG_UBL_STORAGE_MESH_MENU = _UxGT("网格存储"); // "Mesh Storage" - LSTR MSG_UBL_STORAGE_SLOT = _UxGT("存储槽"); // "Memory Slot" - LSTR MSG_UBL_LOAD_MESH = _UxGT("装载热床网格"); // "Load Bed Mesh" - LSTR MSG_UBL_SAVE_MESH = _UxGT("保存热床网格"); // "Save Bed Mesh" - LSTR MSG_MESH_LOADED = _UxGT("网格 %i 已装载"); // "Mesh %i loaded" - LSTR MSG_MESH_SAVED = _UxGT("网格 %i 已保存"); // "Mesh %i saved" - LSTR MSG_UBL_NO_STORAGE = _UxGT("没有存储"); // "No storage" - LSTR MSG_UBL_SAVE_ERROR = _UxGT("错误: UBL保存"); // "Err: UBL Save" - LSTR MSG_UBL_RESTORE_ERROR = _UxGT("错误: UBL还原"); // "Err: UBL Restore" + LSTR MSG_UBL_CONTINUE_MESH = _UxGT("继续热床网格"); // "Continue Bed Mesh" + LSTR MSG_UBL_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling" + LSTR MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三点调平"); // "3-Point Leveling" + LSTR MSG_UBL_GRID_MESH_LEVELING = _UxGT("格子网格调平"); // "Grid Mesh Leveling" + LSTR MSG_UBL_MESH_LEVEL = _UxGT("调平网格"); // "Level Mesh" + LSTR MSG_UBL_SIDE_POINTS = _UxGT("边点"); // "Side Points" + LSTR MSG_UBL_MAP_TYPE = _UxGT("图类型"); // "Map Type" + LSTR MSG_UBL_OUTPUT_MAP = _UxGT("输出网格图"); // "Output Mesh Map" + LSTR MSG_UBL_OUTPUT_MAP_HOST = _UxGT("输出到主机"); // "Output for Host" + LSTR MSG_UBL_OUTPUT_MAP_CSV = _UxGT("输出到CSV"); // "Output for CSV" + LSTR MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("输出到备份"); // "Off Printer Backup" + LSTR MSG_UBL_INFO_UBL = _UxGT("输出UBL信息"); // "Output UBL Info" + LSTR MSG_UBL_FILLIN_AMOUNT = _UxGT("填充合计"); // "Fill-in Amount" + LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("手工填充"); // "Manual Fill-in" + LSTR MSG_UBL_SMART_FILLIN = _UxGT("聪明填充"); // "Smart Fill-in" + LSTR MSG_UBL_FILLIN_MESH = _UxGT("填充网格"); // "Fill-in Mesh" + LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("作废所有的"); // "Invalidate All" + LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("作废最近的"); // "Invalidate Closest" + LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("细调所有的"); // "Fine Tune All" + LSTR MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("细调最近的"); // "Fine Tune Closest" + LSTR MSG_UBL_STORAGE_MESH_MENU = _UxGT("网格存储"); // "Mesh Storage" + LSTR MSG_UBL_STORAGE_SLOT = _UxGT("存储槽"); // "Memory Slot" + LSTR MSG_UBL_LOAD_MESH = _UxGT("装载热床网格"); // "Load Bed Mesh" + LSTR MSG_UBL_SAVE_MESH = _UxGT("保存热床网格"); // "Save Bed Mesh" + LSTR MSG_MESH_LOADED = _UxGT("网格 %i 已装载"); // "Mesh %i loaded" + LSTR MSG_MESH_SAVED = _UxGT("网格 %i 已保存"); // "Mesh %i saved" + LSTR MSG_UBL_NO_STORAGE = _UxGT("没有存储"); // "No storage" + LSTR MSG_UBL_SAVE_ERROR = _UxGT("错误: UBL保存"); // "Err: UBL Save" + LSTR MSG_UBL_RESTORE_ERROR = _UxGT("错误: UBL还原"); // "Err: UBL Restore" LSTR MSG_UBL_Z_OFFSET = _UxGT("Z偏移量: "); - LSTR MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped" - LSTR MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL" + LSTR MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped" + LSTR MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL" LSTR MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. 创设冷网格"); LSTR MSG_UBL_2_SMART_FILLIN = _UxGT("2. 聪明填充"); LSTR MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3. 批准网格"); @@ -198,66 +198,66 @@ namespace Language_zh_CN { LSTR MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6. 细调所有的"); LSTR MSG_UBL_7_SAVE_MESH = _UxGT("7. 保存热床网格"); - LSTR MSG_LED_CONTROL = _UxGT("LED控制"); // "LED Control" - LSTR MSG_LEDS = _UxGT("灯"); // "Lights" - LSTR MSG_LED_PRESETS = _UxGT("灯预置"); // "Light Presets" - LSTR MSG_SET_LEDS_RED = _UxGT("红"); // "Red" - LSTR MSG_SET_LEDS_ORANGE = _UxGT("橙"); // "Orange" - LSTR MSG_SET_LEDS_YELLOW = _UxGT("黄"); // "Yellow" - LSTR MSG_SET_LEDS_GREEN = _UxGT("绿"); // "Green" - LSTR MSG_SET_LEDS_BLUE = _UxGT("蓝"); // "Blue" - LSTR MSG_SET_LEDS_INDIGO = _UxGT("青"); // "Indigo" - LSTR MSG_SET_LEDS_VIOLET = _UxGT("紫"); // "Violet" - LSTR MSG_SET_LEDS_WHITE = _UxGT("白"); // "White" - LSTR MSG_SET_LEDS_DEFAULT = _UxGT("缺省"); // "Default" - LSTR MSG_CUSTOM_LEDS = _UxGT("定制灯"); // "Custom Lights" - LSTR MSG_INTENSITY_R = _UxGT("红饱和度"); // "Red Intensity" - LSTR MSG_INTENSITY_G = _UxGT("绿饱和度"); // "Green Intensity" - LSTR MSG_INTENSITY_B = _UxGT("蓝饱和度"); // "Blue Intensity" - LSTR MSG_INTENSITY_W = _UxGT("白饱和度"); // "White Intensity" - LSTR MSG_LED_BRIGHTNESS = _UxGT("亮度"); // "Brightness" + LSTR MSG_LED_CONTROL = _UxGT("LED控制"); // "LED Control" + LSTR MSG_LEDS = _UxGT("灯"); // "Lights" + LSTR MSG_LED_PRESETS = _UxGT("灯预置"); // "Light Presets" + LSTR MSG_SET_LEDS_RED = _UxGT("红"); // "Red" + LSTR MSG_SET_LEDS_ORANGE = _UxGT("橙"); // "Orange" + LSTR MSG_SET_LEDS_YELLOW = _UxGT("黄"); // "Yellow" + LSTR MSG_SET_LEDS_GREEN = _UxGT("绿"); // "Green" + LSTR MSG_SET_LEDS_BLUE = _UxGT("蓝"); // "Blue" + LSTR MSG_SET_LEDS_INDIGO = _UxGT("青"); // "Indigo" + LSTR MSG_SET_LEDS_VIOLET = _UxGT("紫"); // "Violet" + LSTR MSG_SET_LEDS_WHITE = _UxGT("白"); // "White" + LSTR MSG_SET_LEDS_DEFAULT = _UxGT("缺省"); // "Default" + LSTR MSG_CUSTOM_LEDS = _UxGT("定制灯"); // "Custom Lights" + LSTR MSG_INTENSITY_R = _UxGT("红饱和度"); // "Red Intensity" + LSTR MSG_INTENSITY_G = _UxGT("绿饱和度"); // "Green Intensity" + LSTR MSG_INTENSITY_B = _UxGT("蓝饱和度"); // "Blue Intensity" + LSTR MSG_INTENSITY_W = _UxGT("白饱和度"); // "White Intensity" + LSTR MSG_LED_BRIGHTNESS = _UxGT("亮度"); // "Brightness" - LSTR MSG_MOVING = _UxGT("移动..."); // "Moving..." - LSTR MSG_FREE_XY = _UxGT("释放 XY"); // "Free XY" - LSTR MSG_MOVE_X = _UxGT("移动X"); // "Move X" - LSTR MSG_MOVE_Y = _UxGT("移动Y"); // "Move Y" - LSTR MSG_MOVE_Z = _UxGT("移动Z"); // "Move Z" - LSTR MSG_MOVE_N = _UxGT("移动@"); // "Move @" - LSTR MSG_MOVE_E = _UxGT("挤出机"); // "Extruder" - LSTR MSG_MOVE_EN = _UxGT("挤出机 *"); // "Extruder" + LSTR MSG_MOVING = _UxGT("移动..."); // "Moving..." + LSTR MSG_FREE_XY = _UxGT("释放 XY"); // "Free XY" + LSTR MSG_MOVE_X = _UxGT("移动X"); // "Move X" + LSTR MSG_MOVE_Y = _UxGT("移动Y"); // "Move Y" + LSTR MSG_MOVE_Z = _UxGT("移动Z"); // "Move Z" + LSTR MSG_MOVE_N = _UxGT("移动@"); // "Move @" + LSTR MSG_MOVE_E = _UxGT("挤出机"); // "Extruder" + LSTR MSG_MOVE_EN = _UxGT("挤出机 *"); // "Extruder" LSTR MSG_HOTEND_TOO_COLD = _UxGT("热端太冷"); - LSTR MSG_MOVE_N_MM = _UxGT("移动 $ mm"); // "Move 0.025mm" - LSTR MSG_MOVE_01MM = _UxGT("移动 0.1 mm"); // "Move 0.1mm" - LSTR MSG_MOVE_1MM = _UxGT("移动 1 mm"); // "Move 1mm" - LSTR MSG_MOVE_10MM = _UxGT("移动 10 mm"); // "Move 10mm" - LSTR MSG_MOVE_100MM = _UxGT("移动 100 mm"); // "Move 100mm" - LSTR MSG_SPEED = _UxGT("速率"); // "Speed" - LSTR MSG_MESH_Z_OFFSET = _UxGT("热床Z"); // "Bed Z" - LSTR MSG_NOZZLE = _UxGT("喷嘴"); // "Nozzle" 噴嘴 - LSTR MSG_NOZZLE_N = _UxGT("喷嘴 ~"); // "Nozzle" 噴嘴 + LSTR MSG_MOVE_N_MM = _UxGT("移动 $ mm"); // "Move 0.025mm" + LSTR MSG_MOVE_01MM = _UxGT("移动 0.1 mm"); // "Move 0.1mm" + LSTR MSG_MOVE_1MM = _UxGT("移动 1 mm"); // "Move 1mm" + LSTR MSG_MOVE_10MM = _UxGT("移动 10 mm"); // "Move 10mm" + LSTR MSG_MOVE_100MM = _UxGT("移动 100 mm"); // "Move 100mm" + LSTR MSG_SPEED = _UxGT("速率"); // "Speed" + LSTR MSG_MESH_Z_OFFSET = _UxGT("热床Z"); // "Bed Z" + LSTR MSG_NOZZLE = _UxGT("喷嘴"); // "Nozzle" 噴嘴 + LSTR MSG_NOZZLE_N = _UxGT("喷嘴 ~"); // "Nozzle" 噴嘴 LSTR MSG_NOZZLE_PARKED = _UxGT("喷嘴已停靠"); LSTR MSG_NOZZLE_STANDBY = _UxGT("喷嘴待命中"); - LSTR MSG_BED = _UxGT("热床"); // "Bed" + LSTR MSG_BED = _UxGT("热床"); // "Bed" LSTR MSG_CHAMBER = _UxGT("机箱壳"); - LSTR MSG_FAN_SPEED = _UxGT("风扇速率"); // "Fan speed" - LSTR MSG_FAN_SPEED_N = _UxGT("风扇速率 ~"); // "Fan speed" + LSTR MSG_FAN_SPEED = _UxGT("风扇速率"); // "Fan speed" + LSTR MSG_FAN_SPEED_N = _UxGT("风扇速率 ~"); // "Fan speed" LSTR MSG_STORED_FAN_N = _UxGT("存储的风扇 ~"); - LSTR MSG_EXTRA_FAN_SPEED = _UxGT("额外风扇速率"); // "Extra fan speed" - LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ~"); // "Extra fan speed" + LSTR MSG_EXTRA_FAN_SPEED = _UxGT("额外风扇速率"); // "Extra fan speed" + LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ~"); // "Extra fan speed" LSTR MSG_CONTROLLER_FAN = _UxGT("控制器风扇"); LSTR MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("空闲速度"); LSTR MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("自动模式"); LSTR MSG_CONTROLLER_FAN_SPEED = _UxGT("工作速度"); LSTR MSG_CONTROLLER_FAN_DURATION = _UxGT("空闲周期"); - LSTR MSG_FLOW = _UxGT("挤出速率"); // "Flow" - LSTR MSG_FLOW_N = _UxGT("挤出速率 ~"); // "Flow" - LSTR MSG_CONTROL = _UxGT("控制"); // "Control" - LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); // " " LCD_STR_THERMOMETER " Min" - LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); // " " LCD_STR_THERMOMETER " Max" - LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 因数"); // " " LCD_STR_THERMOMETER " Fact" - LSTR MSG_AUTOTEMP = _UxGT("自动控温"); // "Autotemp" - LSTR MSG_LCD_ON = _UxGT("开"); // "On" - LSTR MSG_LCD_OFF = _UxGT("关"); // "Off" + LSTR MSG_FLOW = _UxGT("挤出速率"); // "Flow" + LSTR MSG_FLOW_N = _UxGT("挤出速率 ~"); // "Flow" + LSTR MSG_CONTROL = _UxGT("控制"); // "Control" + LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); // " " LCD_STR_THERMOMETER " Min" + LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); // " " LCD_STR_THERMOMETER " Max" + LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 因数"); // " " LCD_STR_THERMOMETER " Fact" + LSTR MSG_AUTOTEMP = _UxGT("自动控温"); // "Autotemp" + LSTR MSG_LCD_ON = _UxGT("开"); // "On" + LSTR MSG_LCD_OFF = _UxGT("关"); // "Off" LSTR MSG_PID_AUTOTUNE = _UxGT("自动PID"); LSTR MSG_PID_AUTOTUNE_E = _UxGT("自动PID *"); LSTR MSG_PID_AUTOTUNE_DONE = _UxGT("PID调整完成"); @@ -265,58 +265,58 @@ namespace Language_zh_CN { LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("自动调失败! 温度太高"); LSTR MSG_PID_TIMEOUT = _UxGT("自动调失败! 超时"); LSTR MSG_SELECT_E = _UxGT("选择 *"); - LSTR MSG_ACC = _UxGT("加速度"); // "Accel" acceleration - LSTR MSG_JERK = _UxGT("抖动速率"); // "Jerk" - LSTR MSG_VA_JERK = _UxGT("轴抖动速率") STR_A; // "Va-jerk" - LSTR MSG_VB_JERK = _UxGT("轴抖动速率") STR_B; // "Vb-jerk" - LSTR MSG_VC_JERK = _UxGT("轴抖动速率") STR_C; // "Vc-jerk" - LSTR MSG_VN_JERK = _UxGT("轴抖动速率@"); // "V@-jerk" - LSTR MSG_VE_JERK = _UxGT("挤出机抖动速率"); // "Ve-jerk" + LSTR MSG_ACC = _UxGT("加速度"); // "Accel" acceleration + LSTR MSG_JERK = _UxGT("抖动速率"); // "Jerk" + LSTR MSG_VA_JERK = _UxGT("轴抖动速率") STR_A; // "Va-jerk" + LSTR MSG_VB_JERK = _UxGT("轴抖动速率") STR_B; // "Vb-jerk" + LSTR MSG_VC_JERK = _UxGT("轴抖动速率") STR_C; // "Vc-jerk" + LSTR MSG_VN_JERK = _UxGT("轴抖动速率@"); // "V@-jerk" + LSTR MSG_VE_JERK = _UxGT("挤出机抖动速率"); // "Ve-jerk" LSTR MSG_JUNCTION_DEVIATION = _UxGT("接点差"); - LSTR MSG_MAX_SPEED = _UxGT("速度"); // "Velocity" - LSTR MSG_VMAX_A = _UxGT("最大进料速率") STR_A; // "Vmax " max_feedrate_mm_s + LSTR MSG_MAX_SPEED = _UxGT("速度"); // "Velocity" + LSTR MSG_VMAX_A = _UxGT("最大进料速率") STR_A; // "Vmax " max_feedrate_mm_s LSTR MSG_VMAX_B = _UxGT("最大进料速率") STR_B; LSTR MSG_VMAX_C = _UxGT("最大进料速率") STR_C; LSTR MSG_VMAX_N = _UxGT("最大进料速率@"); LSTR MSG_VMAX_E = _UxGT("最大进料速率E"); LSTR MSG_VMAX_EN = _UxGT("最大进料速率 *"); - LSTR MSG_VMIN = _UxGT("最小进料速率"); // "Vmin" min_feedrate_mm_s - LSTR MSG_VTRAV_MIN = _UxGT("最小移动速率"); // "VTrav min" min_travel_feedrate_mm_s, (target) speed of the move - LSTR MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration" - LSTR MSG_AMAX_A = _UxGT("最大打印加速度") STR_A; // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves + LSTR MSG_VMIN = _UxGT("最小进料速率"); // "Vmin" min_feedrate_mm_s + LSTR MSG_VTRAV_MIN = _UxGT("最小移动速率"); // "VTrav min" min_travel_feedrate_mm_s, (target) speed of the move + LSTR MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration" + LSTR MSG_AMAX_A = _UxGT("最大打印加速度") STR_A; // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves LSTR MSG_AMAX_B = _UxGT("最大打印加速度") STR_B; LSTR MSG_AMAX_C = _UxGT("最大打印加速度") STR_C; LSTR MSG_AMAX_N = _UxGT("最大打印加速度@"); LSTR MSG_AMAX_E = _UxGT("最大打印加速度E"); LSTR MSG_AMAX_EN = _UxGT("最大打印加速度 *"); - LSTR MSG_A_RETRACT = _UxGT("收进加速度"); // "A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts - LSTR MSG_A_TRAVEL = _UxGT("非打印移动加速度"); // "A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves + LSTR MSG_A_RETRACT = _UxGT("收进加速度"); // "A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts + LSTR MSG_A_TRAVEL = _UxGT("非打印移动加速度"); // "A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves LSTR MSG_XY_FREQUENCY_LIMIT = _UxGT("频率最大"); LSTR MSG_XY_FREQUENCY_FEEDRATE = _UxGT("进给速度"); - LSTR MSG_STEPS_PER_MM = _UxGT("轴步数/mm"); // "Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 - LSTR MSG_A_STEPS = STR_A _UxGT(" 步数/mm"); // "Asteps/mm" + LSTR MSG_STEPS_PER_MM = _UxGT("轴步数/mm"); // "Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 + LSTR MSG_A_STEPS = STR_A _UxGT(" 步数/mm"); // "Asteps/mm" LSTR MSG_B_STEPS = STR_B _UxGT(" 步数/mm"); LSTR MSG_C_STEPS = STR_C _UxGT(" 步数/mm"); LSTR MSG_N_STEPS = _UxGT("@ 步数/mm"); - LSTR MSG_E_STEPS = _UxGT("E 步数/mm"); // "Esteps/mm" + LSTR MSG_E_STEPS = _UxGT("E 步数/mm"); // "Esteps/mm" LSTR MSG_EN_STEPS = _UxGT("* 步数/mm"); - LSTR MSG_TEMPERATURE = _UxGT("温度"); // "Temperature" - LSTR MSG_MOTION = _UxGT("运动"); // "Motion" - LSTR MSG_FILAMENT = _UxGT("料丝"); // "Filament" menu_advanced_filament - LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E 在 mm") SUPERSCRIPT_THREE; // "E in mm3" volumetric_enabled + LSTR MSG_TEMPERATURE = _UxGT("温度"); // "Temperature" + LSTR MSG_MOTION = _UxGT("运动"); // "Motion" + LSTR MSG_FILAMENT = _UxGT("料丝"); // "Filament" menu_advanced_filament + LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E 在 mm") SUPERSCRIPT_THREE; // "E in mm3" volumetric_enabled LSTR MSG_VOLUMETRIC_LIMIT = _UxGT("E 限制 在 mm") SUPERSCRIPT_THREE; LSTR MSG_VOLUMETRIC_LIMIT_E = _UxGT("E 限制 *"); - LSTR MSG_FILAMENT_DIAM = _UxGT("丝料直径"); // "Fil. Dia." + LSTR MSG_FILAMENT_DIAM = _UxGT("丝料直径"); // "Fil. Dia." LSTR MSG_FILAMENT_DIAM_E = _UxGT("丝料直径 *"); - LSTR MSG_FILAMENT_UNLOAD = _UxGT("卸载 mm"); // "Unload mm" - LSTR MSG_FILAMENT_LOAD = _UxGT("装载 mm"); // "Load mm" + LSTR MSG_FILAMENT_UNLOAD = _UxGT("卸载 mm"); // "Unload mm" + LSTR MSG_FILAMENT_LOAD = _UxGT("装载 mm"); // "Load mm" LSTR MSG_ADVANCE_K = _UxGT("Advance K"); LSTR MSG_ADVANCE_K_E = _UxGT("Advance K *"); - LSTR MSG_CONTRAST = _UxGT("LCD对比度"); // "LCD contrast" - LSTR MSG_STORE_EEPROM = _UxGT("保存设置"); // "Store memory" - LSTR MSG_LOAD_EEPROM = _UxGT("装载设置"); // "Load memory" - LSTR MSG_RESTORE_DEFAULTS = _UxGT("恢复安全值"); // "Restore Defaults" - LSTR MSG_INIT_EEPROM = _UxGT("初始化设置"); // "Initialize EEPROM" + LSTR MSG_CONTRAST = _UxGT("LCD对比度"); // "LCD contrast" + LSTR MSG_STORE_EEPROM = _UxGT("保存设置"); // "Store memory" + LSTR MSG_LOAD_EEPROM = _UxGT("装载设置"); // "Load memory" + LSTR MSG_RESTORE_DEFAULTS = _UxGT("恢复安全值"); // "Restore Defaults" + LSTR MSG_INIT_EEPROM = _UxGT("初始化设置"); // "Initialize EEPROM" LSTR MSG_ERR_EEPROM_CRC = _UxGT("EEPROM 校验和 错误"); LSTR MSG_ERR_EEPROM_SIZE = _UxGT("EEPROM 尺寸 错误"); LSTR MSG_ERR_EEPROM_VERSION = _UxGT("EEPROM 版本 错误"); @@ -324,9 +324,9 @@ namespace Language_zh_CN { LSTR MSG_MEDIA_UPDATE = _UxGT("存储器更新"); LSTR MSG_RESET_PRINTER = _UxGT("复位打印机"); LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("刷新"); - LSTR MSG_INFO_SCREEN = _UxGT("信息屏"); // "Info screen" - LSTR MSG_PREPARE = _UxGT("准备"); // "Prepare" - LSTR MSG_TUNE = _UxGT("调整"); // "Tune" + LSTR MSG_INFO_SCREEN = _UxGT("信息屏"); // "Info screen" + LSTR MSG_PREPARE = _UxGT("准备"); // "Prepare" + LSTR MSG_TUNE = _UxGT("调整"); // "Tune" LSTR MSG_POWER_MONITOR = _UxGT("电源监控"); LSTR MSG_CURRENT = _UxGT("电流"); LSTR MSG_VOLTAGE = _UxGT("电压"); @@ -343,33 +343,33 @@ namespace Language_zh_CN { LSTR MSG_BUTTON_BACK = _UxGT("返回"); LSTR MSG_BUTTON_PROCEED = _UxGT("继续"); LSTR MSG_PAUSING = _UxGT("暂停中..."); - LSTR MSG_PAUSE_PRINT = _UxGT("暂停打印"); // "Pause print" - LSTR MSG_RESUME_PRINT = _UxGT("恢复打印"); // "Resume print" - LSTR MSG_STOP_PRINT = _UxGT("停止打印"); // "Stop print" + LSTR MSG_PAUSE_PRINT = _UxGT("暂停打印"); // "Pause print" + LSTR MSG_RESUME_PRINT = _UxGT("恢复打印"); // "Resume print" + LSTR MSG_STOP_PRINT = _UxGT("停止打印"); // "Stop print" LSTR MSG_PRINTING_OBJECT = _UxGT("打印物体"); LSTR MSG_CANCEL_OBJECT = _UxGT("取消物体"); LSTR MSG_CANCEL_OBJECT_N = _UxGT("取消物体 {"); LSTR MSG_OUTAGE_RECOVERY = _UxGT("中断恢复"); - LSTR MSG_MEDIA_MENU = _UxGT("从存储卡上打印"); // "Print from SD" - LSTR MSG_NO_MEDIA = _UxGT("无存储卡"); // "No SD card" - LSTR MSG_DWELL = _UxGT("休眠中 ..."); // "Sleep..." - LSTR MSG_USERWAIT = _UxGT("点击继续 ..."); // "Click to resume..." - LSTR MSG_PRINT_PAUSED = _UxGT("暫停打印"); // "Print paused" + LSTR MSG_MEDIA_MENU = _UxGT("从存储卡上打印"); // "Print from SD" + LSTR MSG_NO_MEDIA = _UxGT("无存储卡"); // "No SD card" + LSTR MSG_DWELL = _UxGT("休眠中 ..."); // "Sleep..." + LSTR MSG_USERWAIT = _UxGT("点击继续 ..."); // "Click to resume..." + LSTR MSG_PRINT_PAUSED = _UxGT("暫停打印"); // "Print paused" LSTR MSG_PRINTING = _UxGT("打印中..."); - LSTR MSG_PRINT_ABORTED = _UxGT("已取消打印"); // "Print aborted" + LSTR MSG_PRINT_ABORTED = _UxGT("已取消打印"); // "Print aborted" LSTR MSG_PRINT_DONE = _UxGT("打印已完成"); - LSTR MSG_NO_MOVE = _UxGT("无移动"); // "No move." - LSTR MSG_KILLED = _UxGT("已杀掉"); // "KILLED. " - LSTR MSG_STOPPED = _UxGT("已停止"); // "STOPPED. " - LSTR MSG_CONTROL_RETRACT = _UxGT("回抽长度mm"); // "Retract mm" retract_length, retract length (positive mm) - LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("换手回抽长度mm"); // "Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change - LSTR MSG_CONTROL_RETRACTF = _UxGT("回抽速率mm/s"); // "Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) - LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); // "Hop mm" retract_zraise, retract Z-lift - LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("回抽恢复长度mm"); // "UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) - LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("换手回抽恢复长度mm"); // "S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) - LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回抽恢复后进料速率mm/s"); // "Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) - LSTR MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V" - LSTR MSG_AUTORETRACT = _UxGT("自动抽回"); // "Auto-Retract" autoretract_enabled, + LSTR MSG_NO_MOVE = _UxGT("无移动"); // "No move." + LSTR MSG_KILLED = _UxGT("已杀掉"); // "KILLED. " + LSTR MSG_STOPPED = _UxGT("已停止"); // "STOPPED. " + LSTR MSG_CONTROL_RETRACT = _UxGT("回抽长度mm"); // "Retract mm" retract_length, retract length (positive mm) + LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("换手回抽长度mm"); // "Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change + LSTR MSG_CONTROL_RETRACTF = _UxGT("回抽速率mm/s"); // "Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) + LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); // "Hop mm" retract_zraise, retract Z-lift + LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("回抽恢复长度mm"); // "UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) + LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("换手回抽恢复长度mm"); // "S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) + LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回抽恢复后进料速率mm/s"); // "Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) + LSTR MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V" + LSTR MSG_AUTORETRACT = _UxGT("自动抽回"); // "Auto-Retract" autoretract_enabled, LSTR MSG_FILAMENT_SWAP_LENGTH = _UxGT("交换长度"); LSTR MSG_FILAMENT_SWAP_EXTRA = _UxGT("额外的交换"); LSTR MSG_FILAMENT_PURGE_LENGTH = _UxGT("清洗长度"); @@ -387,19 +387,19 @@ namespace Language_zh_CN { LSTR MSG_TOOL_MIGRATION_AUTO = _UxGT("自动迁移"); LSTR MSG_TOOL_MIGRATION_END = _UxGT("上一个挤出机"); LSTR MSG_TOOL_MIGRATION_SWAP = _UxGT("迁移至 *"); - LSTR MSG_FILAMENTCHANGE = _UxGT("更换丝料"); // "Change filament" - LSTR MSG_FILAMENTCHANGE_E = _UxGT("更换丝料 *"); // "Change filament" - LSTR MSG_FILAMENTLOAD = _UxGT("装载丝料"); // "Load filament" - LSTR MSG_FILAMENTLOAD_E = _UxGT("装载丝料 *"); // "Load filament" - LSTR MSG_FILAMENTUNLOAD = _UxGT("卸载丝料"); // "Unload filament" - LSTR MSG_FILAMENTUNLOAD_E = _UxGT("卸载丝料 *"); // "Unload filament" - LSTR MSG_FILAMENTUNLOAD_ALL = _UxGT("卸载全部"); // "Unload All" - LSTR MSG_ATTACH_MEDIA = _UxGT("初始化存储卡"); // "Init. SD card" - LSTR MSG_CHANGE_MEDIA = _UxGT("更换存储卡"); // "Change SD card" + LSTR MSG_FILAMENTCHANGE = _UxGT("更换丝料"); // "Change filament" + LSTR MSG_FILAMENTCHANGE_E = _UxGT("更换丝料 *"); // "Change filament" + LSTR MSG_FILAMENTLOAD = _UxGT("装载丝料"); // "Load filament" + LSTR MSG_FILAMENTLOAD_E = _UxGT("装载丝料 *"); // "Load filament" + LSTR MSG_FILAMENTUNLOAD = _UxGT("卸载丝料"); // "Unload filament" + LSTR MSG_FILAMENTUNLOAD_E = _UxGT("卸载丝料 *"); // "Unload filament" + LSTR MSG_FILAMENTUNLOAD_ALL = _UxGT("卸载全部"); // "Unload All" + LSTR MSG_ATTACH_MEDIA = _UxGT("初始化存储卡"); // "Init. SD card" + LSTR MSG_CHANGE_MEDIA = _UxGT("更换存储卡"); // "Change SD card" LSTR MSG_RELEASE_MEDIA = _UxGT("释放存储卡"); - LSTR MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); // "Z probe out. bed" Z probe is not within the physical limits - LSTR MSG_SKEW_FACTOR = _UxGT("偏斜因数"); // "Skew Factor" - LSTR MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch" + LSTR MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); // "Z probe out. bed" Z probe is not within the physical limits + LSTR MSG_SKEW_FACTOR = _UxGT("偏斜因数"); // "Skew Factor" + LSTR MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch" LSTR MSG_BLTOUCH_SELFTEST = _UxGT("自检"); LSTR MSG_BLTOUCH_RESET = _UxGT("重置"); LSTR MSG_BLTOUCH_STOW = _UxGT("装载"); @@ -419,96 +419,96 @@ namespace Language_zh_CN { LSTR MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("部署TouchMI"); LSTR MSG_MANUAL_DEPLOY = _UxGT("部署Z探针"); LSTR MSG_MANUAL_STOW = _UxGT("收好Z探针"); - LSTR MSG_HOME_FIRST = _UxGT("归位 %s 先"); // "Home ... first" + LSTR MSG_HOME_FIRST = _UxGT("归位 %s 先"); // "Home ... first" LSTR MSG_ZPROBE_OFFSETS = _UxGT("探针偏移量"); LSTR MSG_ZPROBE_XOFFSET = _UxGT("探针X偏移"); LSTR MSG_ZPROBE_YOFFSET = _UxGT("探针Y偏移"); - LSTR MSG_ZPROBE_ZOFFSET = _UxGT("探针Z偏移"); // "Z Offset" - LSTR MSG_BABYSTEP_X = _UxGT("微量调整X轴"); // "Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts - LSTR MSG_BABYSTEP_Y = _UxGT("微量调整Y轴"); // "Babystep Y" - LSTR MSG_BABYSTEP_Z = _UxGT("微量调整Z轴"); // "Babystep Z" + LSTR MSG_ZPROBE_ZOFFSET = _UxGT("探针Z偏移"); // "Z Offset" + LSTR MSG_BABYSTEP_X = _UxGT("微量调整X轴"); // "Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts + LSTR MSG_BABYSTEP_Y = _UxGT("微量调整Y轴"); // "Babystep Y" + LSTR MSG_BABYSTEP_Z = _UxGT("微量调整Z轴"); // "Babystep Z" LSTR MSG_BABYSTEP_TOTAL = _UxGT("总计"); - LSTR MSG_ENDSTOP_ABORT = _UxGT("挡块终止"); // "Endstop abort" - LSTR MSG_HEATING_FAILED_LCD = _UxGT("加热失败"); // "Heating failed" - LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("错误：冗余温度"); // "Err: REDUNDANT TEMP" - LSTR MSG_THERMAL_RUNAWAY = _UxGT("温控失控"); // "THERMAL RUNAWAY" + LSTR MSG_ENDSTOP_ABORT = _UxGT("挡块终止"); // "Endstop abort" + LSTR MSG_HEATING_FAILED_LCD = _UxGT("加热失败"); // "Heating failed" + LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("错误：冗余温度"); // "Err: REDUNDANT TEMP" + LSTR MSG_THERMAL_RUNAWAY = _UxGT("温控失控"); // "THERMAL RUNAWAY" LSTR MSG_THERMAL_RUNAWAY_BED = _UxGT("热床热量失控"); LSTR MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("机箱热量失控"); - LSTR MSG_ERR_MAXTEMP = _UxGT("错误：最高温度"); // "Err: MAXTEMP" - LSTR MSG_ERR_MINTEMP = _UxGT("错误：最低温度"); // "Err: MINTEMP" - LSTR MSG_HALTED = _UxGT("打印停机"); // "PRINTER HALTED" - LSTR MSG_PLEASE_RESET = _UxGT("请重置"); // "Please reset" - LSTR MSG_HEATING = _UxGT("加热中 ..."); // "Heating..." + LSTR MSG_ERR_MAXTEMP = _UxGT("错误：最高温度"); // "Err: MAXTEMP" + LSTR MSG_ERR_MINTEMP = _UxGT("错误：最低温度"); // "Err: MINTEMP" + LSTR MSG_HALTED = _UxGT("打印停机"); // "PRINTER HALTED" + LSTR MSG_PLEASE_RESET = _UxGT("请重置"); // "Please reset" + LSTR MSG_HEATING = _UxGT("加热中 ..."); // "Heating..." LSTR MSG_COOLING = _UxGT("冷却中 ..."); - LSTR MSG_BED_HEATING = _UxGT("加热热床中 ..."); // "Bed Heating..." + LSTR MSG_BED_HEATING = _UxGT("加热热床中 ..."); // "Bed Heating..." LSTR MSG_BED_COOLING = _UxGT("热床冷却中 ..."); LSTR MSG_CHAMBER_HEATING = _UxGT("机箱加热中 ..."); LSTR MSG_CHAMBER_COOLING = _UxGT("机箱冷却中 ..."); - LSTR MSG_DELTA_CALIBRATE = _UxGT("⊿校准"); // "Delta Calibration" - LSTR MSG_DELTA_CALIBRATE_X = _UxGT("⊿校准X"); // "Calibrate X" - LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校准Y"); // "Calibrate Y" - LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校准Z"); // "Calibrate Z" - LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校准中心"); // "Calibrate Center" - LSTR MSG_DELTA_SETTINGS = _UxGT("⊿设置"); // "Delta Settings" - LSTR MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自动校准"); // "Auto Calibration" - LSTR MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod" - LSTR MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height" - LSTR MSG_DELTA_RADIUS = _UxGT("⊿半径"); // "Radius" - LSTR MSG_INFO_MENU = _UxGT("关于打印机"); // "About Printer" - LSTR MSG_INFO_PRINTER_MENU = _UxGT("打印机信息"); // "Printer Info" - LSTR MSG_3POINT_LEVELING = _UxGT("三点调平"); // "3-Point Leveling" - LSTR MSG_LINEAR_LEVELING = _UxGT("线性调平"); // "Linear Leveling" - LSTR MSG_BILINEAR_LEVELING = _UxGT("双线性调平"); // "Bilinear Leveling" - LSTR MSG_UBL_LEVELING = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling" - LSTR MSG_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling" - LSTR MSG_INFO_STATS_MENU = _UxGT("打印机统计"); // "Printer Stats" - LSTR MSG_INFO_BOARD_MENU = _UxGT("主板信息"); // "Board Info" - LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("温度计"); // "Thermistors" - LSTR MSG_INFO_EXTRUDERS = _UxGT("挤出机"); // "Extruders" - LSTR MSG_INFO_BAUDRATE = _UxGT("波特率"); // "Baud" - LSTR MSG_INFO_PROTOCOL = _UxGT("协议"); // "Protocol" + LSTR MSG_DELTA_CALIBRATE = _UxGT("⊿校准"); // "Delta Calibration" + LSTR MSG_DELTA_CALIBRATE_X = _UxGT("⊿校准X"); // "Calibrate X" + LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校准Y"); // "Calibrate Y" + LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校准Z"); // "Calibrate Z" + LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校准中心"); // "Calibrate Center" + LSTR MSG_DELTA_SETTINGS = _UxGT("⊿设置"); // "Delta Settings" + LSTR MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自动校准"); // "Auto Calibration" + LSTR MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod" + LSTR MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height" + LSTR MSG_DELTA_RADIUS = _UxGT("⊿半径"); // "Radius" + LSTR MSG_INFO_MENU = _UxGT("关于打印机"); // "About Printer" + LSTR MSG_INFO_PRINTER_MENU = _UxGT("打印机信息"); // "Printer Info" + LSTR MSG_3POINT_LEVELING = _UxGT("三点调平"); // "3-Point Leveling" + LSTR MSG_LINEAR_LEVELING = _UxGT("线性调平"); // "Linear Leveling" + LSTR MSG_BILINEAR_LEVELING = _UxGT("双线性调平"); // "Bilinear Leveling" + LSTR MSG_UBL_LEVELING = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling" + LSTR MSG_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling" + LSTR MSG_INFO_STATS_MENU = _UxGT("打印机统计"); // "Printer Stats" + LSTR MSG_INFO_BOARD_MENU = _UxGT("主板信息"); // "Board Info" + LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("温度计"); // "Thermistors" + LSTR MSG_INFO_EXTRUDERS = _UxGT("挤出机"); // "Extruders" + LSTR MSG_INFO_BAUDRATE = _UxGT("波特率"); // "Baud" + LSTR MSG_INFO_PROTOCOL = _UxGT("协议"); // "Protocol" LSTR MSG_INFO_RUNAWAY_OFF = _UxGT("监控温度失控:关"); LSTR MSG_INFO_RUNAWAY_ON = _UxGT("监控温度失控:开"); LSTR MSG_HOTEND_IDLE_TIMEOUT = _UxGT("热端空闲超时"); - LSTR MSG_CASE_LIGHT = _UxGT("外壳灯"); // "Case light" - LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("灯亮度"); // "Light BRIGHTNESS" + LSTR MSG_CASE_LIGHT = _UxGT("外壳灯"); // "Case light" + LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("灯亮度"); // "Light BRIGHTNESS" - LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("打印机不正确"); // "The printer is incorrect" + LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("打印机不正确"); // "The printer is incorrect" #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2 - LSTR MSG_INFO_PRINT_COUNT = _UxGT("打印计数"); // "Print Count" - LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("完成了"); // "Completed" - LSTR MSG_INFO_PRINT_TIME = _UxGT("总打印时间"); // "Total print time" - LSTR MSG_INFO_PRINT_LONGEST = _UxGT("最长工作时间"); // "Longest job time" - LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("总计挤出"); // "Extruded total" + LSTR MSG_INFO_PRINT_COUNT = _UxGT("打印计数"); // "Print Count" + LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("完成了"); // "Completed" + LSTR MSG_INFO_PRINT_TIME = _UxGT("总打印时间"); // "Total print time" + LSTR MSG_INFO_PRINT_LONGEST = _UxGT("最长工作时间"); // "Longest job time" + LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("总计挤出"); // "Extruded total" #else - LSTR MSG_INFO_PRINT_COUNT = _UxGT("打印数"); // "Prints" - LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); // "Completed" - LSTR MSG_INFO_PRINT_TIME = _UxGT("总共"); // "Total" - LSTR MSG_INFO_PRINT_LONGEST = _UxGT("最长"); // "Longest" - LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("已挤出"); // "Extruded" + LSTR MSG_INFO_PRINT_COUNT = _UxGT("打印数"); // "Prints" + LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); // "Completed" + LSTR MSG_INFO_PRINT_TIME = _UxGT("总共"); // "Total" + LSTR MSG_INFO_PRINT_LONGEST = _UxGT("最长"); // "Longest" + LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("已挤出"); // "Extruded" #endif - LSTR MSG_INFO_MIN_TEMP = _UxGT("最低温度"); // "Min Temp" - LSTR MSG_INFO_MAX_TEMP = _UxGT("最高温度"); // "Max Temp" - LSTR MSG_INFO_PSU = _UxGT("电源供应"); // "Power Supply" - LSTR MSG_DRIVE_STRENGTH = _UxGT("驱动力度"); // "Drive Strength" - LSTR MSG_DAC_PERCENT_N = _UxGT("@ 驱动 %"); // "E Driver %" + LSTR MSG_INFO_MIN_TEMP = _UxGT("最低温度"); // "Min Temp" + LSTR MSG_INFO_MAX_TEMP = _UxGT("最高温度"); // "Max Temp" + LSTR MSG_INFO_PSU = _UxGT("电源供应"); // "Power Supply" + LSTR MSG_DRIVE_STRENGTH = _UxGT("驱动力度"); // "Drive Strength" + LSTR MSG_DAC_PERCENT_N = _UxGT("@ 驱动 %"); // "E Driver %" LSTR MSG_ERROR_TMC = _UxGT("TMC 连接错误"); - LSTR MSG_DAC_EEPROM_WRITE = _UxGT("保存驱动设置"); // "DAC EEPROM Write" + LSTR MSG_DAC_EEPROM_WRITE = _UxGT("保存驱动设置"); // "DAC EEPROM Write" LSTR MSG_FILAMENT_CHANGE_HEADER = _UxGT("更换料"); - LSTR MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("打印已暂停"); // "PRINT PAUSED" - LSTR MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("装载丝料"); // "LOAD FILAMENT" - LSTR MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸载丝料"); // "UNLOAD FILAMENT" - LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢复选项:"); // "RESUME OPTIONS:" - LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more" - LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢复打印"); // "Resume print" - LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 喷嘴: "); // " Nozzle: " + LSTR MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("打印已暂停"); // "PRINT PAUSED" + LSTR MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("装载丝料"); // "LOAD FILAMENT" + LSTR MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸载丝料"); // "UNLOAD FILAMENT" + LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢复选项:"); // "RESUME OPTIONS:" + LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more" + LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢复打印"); // "Resume print" + LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 喷嘴: "); // " Nozzle: " LSTR MSG_RUNOUT_SENSOR = _UxGT("断料传感器"); LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("断料距离mm"); - LSTR MSG_KILL_HOMING_FAILED = _UxGT("归原位失败"); // "Homing failed" - LSTR MSG_LCD_PROBING_FAILED = _UxGT("探针探测失败"); // "Probing failed" + LSTR MSG_KILL_HOMING_FAILED = _UxGT("归原位失败"); // "Homing failed" + LSTR MSG_LCD_PROBING_FAILED = _UxGT("探针探测失败"); // "Probing failed" LSTR MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("选择料"); LSTR MSG_MMU2_MENU = _UxGT("MMU"); @@ -566,27 +566,27 @@ namespace Language_zh_CN { #if LCD_HEIGHT >= 4 LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("按下按钮", "恢复打印")); LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停靠中...")); - LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待开始", "丝料", "变更")); // "Wait for start of the filament change" + LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待开始", "丝料", "变更")); // "Wait for start of the filament change" LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入料", "并按下", "以继续")); - LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按钮来", "加热喷嘴.")); // "Press button to heat nozzle." - LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加热喷嘴", "请等待 ...")); // "Heating nozzle Please wait..." - LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下丝料")); // "Wait for filament unload" - LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "进料")); // "Wait for filament load" - LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "丝料清除")); // "Wait for filament purge" + LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按钮来", "加热喷嘴.")); // "Press button to heat nozzle." + LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加热喷嘴", "请等待 ...")); // "Heating nozzle Please wait..." + LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下丝料")); // "Wait for filament unload" + LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "进料")); // "Wait for filament load" + LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "丝料清除")); // "Wait for filament purge" LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("按下已完成", "料的清洗")); - LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待打印", "恢复")); // "Wait for print to resume" + LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待打印", "恢复")); // "Wait for print to resume" #else LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("按下继续")); LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停靠中...")); - LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("请等待 ...")); // "Please wait..." - LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入并单击")); // "Insert and Click" + LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("请等待 ...")); // "Please wait..." + LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入并单击")); // "Insert and Click" LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("按下加热")); - LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加热中 ...")); // "Heating..." - LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); // "Ejecting..." - LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("装载中 ...")); // "Loading..." - LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..." + LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加热中 ...")); // "Heating..." + LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); // "Ejecting..." + LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("装载中 ...")); // "Loading..." + LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..." LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("按下完成")); - LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢复中 ...")); // "Resuming..." + LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢复中 ...")); // "Resuming..." #endif LSTR MSG_TMC_DRIVERS = _UxGT("TMC驱动器"); LSTR MSG_TMC_CURRENT = _UxGT("驱动电流"); @@ -606,7 +606,7 @@ namespace Language_zh_CN { LSTR MSG_REHEAT = _UxGT("重新加热"); LSTR MSG_REHEATING = _UxGT("重新加热中..."); - LSTR MSG_SHORT_DAY = _UxGT("天"); // "d" // One character only - LSTR MSG_SHORT_HOUR = _UxGT("时"); // "h" // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("分"); // "m" // One character only + LSTR MSG_SHORT_DAY = _UxGT("天"); // "d" // One character only + LSTR MSG_SHORT_HOUR = _UxGT("时"); // "h" // One character only + LSTR MSG_SHORT_MINUTE = _UxGT("分"); // "m" // One character only } diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index 9365225cae..968ad4424e 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -28,87 +28,87 @@ * See also https://marlinfw.org/docs/development/lcd_language.html */ namespace Language_zh_TW { - using namespace Language_en; // Inherit undefined strings from English + using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 3; LSTR LANGUAGE = _UxGT("Traditional Chinese"); - LSTR WELCOME_MSG = MACHINE_NAME _UxGT("已就緒."); // " ready." - LSTR MSG_YES = _UxGT("是"); // "YES" - LSTR MSG_NO = _UxGT("否"); // "NO" - LSTR MSG_BACK = _UxGT("返回"); // "Back" - LSTR MSG_MEDIA_ABORTING = _UxGT("正在中止..."); // "Aborting..." - LSTR MSG_MEDIA_INSERTED = _UxGT("記憶卡已插入"); // "Card inserted" - LSTR MSG_MEDIA_REMOVED = _UxGT("記憶卡被拔出"); // "Card removed" - LSTR MSG_MEDIA_WAITING = _UxGT("等待記憶卡"); // "Waiting for media" + LSTR WELCOME_MSG = MACHINE_NAME _UxGT("已就緒."); // " ready." + LSTR MSG_YES = _UxGT("是"); // "YES" + LSTR MSG_NO = _UxGT("否"); // "NO" + LSTR MSG_BACK = _UxGT("返回"); // "Back" + LSTR MSG_MEDIA_ABORTING = _UxGT("正在中止..."); // "Aborting..." + LSTR MSG_MEDIA_INSERTED = _UxGT("記憶卡已插入"); // "Card inserted" + LSTR MSG_MEDIA_REMOVED = _UxGT("記憶卡被拔出"); // "Card removed" + LSTR MSG_MEDIA_WAITING = _UxGT("等待記憶卡"); // "Waiting for media" LSTR MSG_MEDIA_READ_ERROR = _UxGT("記憶卡讀取錯誤"); //"Media read error" - LSTR MSG_MEDIA_USB_REMOVED = _UxGT("USB裝置已移除"); // "USB device removed" - LSTR MSG_MEDIA_USB_FAILED = _UxGT("USB啟動失敗"); // "USB start failed" - LSTR MSG_LCD_ENDSTOPS = _UxGT("擋塊"); // "Endstops" // Max length 8 characters - LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("軟體擋塊"); // "Soft Endstops" - LSTR MSG_MAIN_MENU = _UxGT("主選單"); // "Main" - LSTR MSG_ADVANCED_SETTINGS = _UxGT("進階設置"); // "Advanced Settings" - LSTR MSG_CONFIGURATION = _UxGT("設置"); //Configuration - LSTR MSG_RUN_AUTO_FILES = _UxGT("自動開始"); // "Autostart" - LSTR MSG_DISABLE_STEPPERS = _UxGT("關閉步進馬達"); // "Disable steppers" - LSTR MSG_DEBUG_MENU = _UxGT("除錯選單"); // "Debug Menu" - LSTR MSG_PROGRESS_BAR_TEST = _UxGT("進度條測試"); // "Progress Bar Test" - LSTR MSG_AUTO_HOME = _UxGT("自動回原點"); // "Auto home" - LSTR MSG_AUTO_HOME_X = _UxGT("回X原點"); // "Home X" - LSTR MSG_AUTO_HOME_Y = _UxGT("回Y原點"); // "Home Y" - LSTR MSG_AUTO_HOME_Z = _UxGT("回Z原點"); // "Home Z" - LSTR MSG_AUTO_Z_ALIGN = _UxGT("自動Z對齊"); // "Auto Z-Align" - LSTR MSG_LEVEL_BED_HOMING = _UxGT("平台調平XYZ歸原點"); // "Homing XYZ" - LSTR MSG_LEVEL_BED_WAITING = _UxGT("單擊開始熱床調平"); // "Click to Begin" - LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("下個熱床調平點"); // "Next Point" - LSTR MSG_LEVEL_BED_DONE = _UxGT("完成熱床調平"); // "Leveling Done!" - LSTR MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height" - LSTR MSG_SET_HOME_OFFSETS = _UxGT("設置原點偏移"); // "Set home offsets" - LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已啟用"); // "Offsets applied" + LSTR MSG_MEDIA_USB_REMOVED = _UxGT("USB裝置已移除"); // "USB device removed" + LSTR MSG_MEDIA_USB_FAILED = _UxGT("USB啟動失敗"); // "USB start failed" + LSTR MSG_LCD_ENDSTOPS = _UxGT("擋塊"); // "Endstops" // Max length 8 characters + LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("軟體擋塊"); // "Soft Endstops" + LSTR MSG_MAIN_MENU = _UxGT("主選單"); // "Main" + LSTR MSG_ADVANCED_SETTINGS = _UxGT("進階設置"); // "Advanced Settings" + LSTR MSG_CONFIGURATION = _UxGT("設置"); //Configuration + LSTR MSG_RUN_AUTO_FILES = _UxGT("自動開始"); // "Autostart" + LSTR MSG_DISABLE_STEPPERS = _UxGT("關閉步進馬達"); // "Disable steppers" + LSTR MSG_DEBUG_MENU = _UxGT("除錯選單"); // "Debug Menu" + LSTR MSG_PROGRESS_BAR_TEST = _UxGT("進度條測試"); // "Progress Bar Test" + LSTR MSG_AUTO_HOME = _UxGT("自動回原點"); // "Auto home" + LSTR MSG_AUTO_HOME_X = _UxGT("回X原點"); // "Home X" + LSTR MSG_AUTO_HOME_Y = _UxGT("回Y原點"); // "Home Y" + LSTR MSG_AUTO_HOME_Z = _UxGT("回Z原點"); // "Home Z" + LSTR MSG_AUTO_Z_ALIGN = _UxGT("自動Z對齊"); // "Auto Z-Align" + LSTR MSG_LEVEL_BED_HOMING = _UxGT("平台調平XYZ歸原點"); // "Homing XYZ" + LSTR MSG_LEVEL_BED_WAITING = _UxGT("單擊開始熱床調平"); // "Click to Begin" + LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("下個熱床調平點"); // "Next Point" + LSTR MSG_LEVEL_BED_DONE = _UxGT("完成熱床調平"); // "Leveling Done!" + LSTR MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height" + LSTR MSG_SET_HOME_OFFSETS = _UxGT("設置原點偏移"); // "Set home offsets" + LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已啟用"); // "Offsets applied" #if HAS_PREHEAT - LSTR MSG_PREHEAT_1 = _UxGT("預熱 ") PREHEAT_1_LABEL; // "Preheat PREHEAT_1_LABEL" - LSTR MSG_PREHEAT_1_H = _UxGT("預熱 ") PREHEAT_1_LABEL " ~"; // "Preheat PREHEAT_1_LABEL" - LSTR MSG_PREHEAT_1_END = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴"); //MSG_PREHEAT_1 " " - LSTR MSG_PREHEAT_1_END_E = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴 ~"); //MSG_PREHEAT_1 " " - LSTR MSG_PREHEAT_1_ALL = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All" - LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 熱床"); //MSG_PREHEAT_1 " Bed" - LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 設置"); //MSG_PREHEAT_1 " conf" + LSTR MSG_PREHEAT_1 = _UxGT("預熱 ") PREHEAT_1_LABEL; // "Preheat PREHEAT_1_LABEL" + LSTR MSG_PREHEAT_1_H = _UxGT("預熱 ") PREHEAT_1_LABEL " ~"; // "Preheat PREHEAT_1_LABEL" + LSTR MSG_PREHEAT_1_END = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴"); //MSG_PREHEAT_1 " " + LSTR MSG_PREHEAT_1_END_E = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴 ~"); //MSG_PREHEAT_1 " " + LSTR MSG_PREHEAT_1_ALL = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All" + LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 熱床"); //MSG_PREHEAT_1 " Bed" + LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 設置"); //MSG_PREHEAT_1 " conf" - LSTR MSG_PREHEAT_M = _UxGT("預熱 $"); // "Preheat PREHEAT_1_LABEL" - LSTR MSG_PREHEAT_M_H = _UxGT("預熱 $ ~"); // "Preheat PREHEAT_1_LABEL" - LSTR MSG_PREHEAT_M_END = _UxGT("預熱 $ 噴嘴"); //MSG_PREHEAT_1 " " - LSTR MSG_PREHEAT_M_END_E = _UxGT("預熱 $ 噴嘴 ~"); //MSG_PREHEAT_1 " " - LSTR MSG_PREHEAT_M_ALL = _UxGT("預熱 $ 全部"); //MSG_PREHEAT_1 " All" - LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("預熱 $ 熱床"); //MSG_PREHEAT_1 " Bed" - LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("預熱 $ 設置"); //MSG_PREHEAT_1 " conf" + LSTR MSG_PREHEAT_M = _UxGT("預熱 $"); // "Preheat PREHEAT_1_LABEL" + LSTR MSG_PREHEAT_M_H = _UxGT("預熱 $ ~"); // "Preheat PREHEAT_1_LABEL" + LSTR MSG_PREHEAT_M_END = _UxGT("預熱 $ 噴嘴"); //MSG_PREHEAT_1 " " + LSTR MSG_PREHEAT_M_END_E = _UxGT("預熱 $ 噴嘴 ~"); //MSG_PREHEAT_1 " " + LSTR MSG_PREHEAT_M_ALL = _UxGT("預熱 $ 全部"); //MSG_PREHEAT_1 " All" + LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("預熱 $ 熱床"); //MSG_PREHEAT_1 " Bed" + LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("預熱 $ 設置"); //MSG_PREHEAT_1 " conf" #endif - LSTR MSG_PREHEAT_CUSTOM = _UxGT("自定預熱"); // "Preheat Custom" - LSTR MSG_COOLDOWN = _UxGT("降溫"); // "Cooldown" - LSTR MSG_LASER_MENU = _UxGT("激光控制"); // "Laser Control" - LSTR MSG_LASER_POWER = _UxGT("激光電源"); // "Laser Power" - LSTR MSG_SPINDLE_MENU = _UxGT("主軸控告制"); // "Spindle Control" - LSTR MSG_SPINDLE_POWER = _UxGT("主軸電源"); // "Spindle Power" - LSTR MSG_SPINDLE_REVERSE = _UxGT("主軸反轉"); // "Spindle Reverse" - LSTR MSG_SWITCH_PS_ON = _UxGT("電源打開"); // "Switch power on" - LSTR MSG_SWITCH_PS_OFF = _UxGT("電源關閉"); // "Switch power off" - LSTR MSG_EXTRUDE = _UxGT("擠出"); // "Extrude" - LSTR MSG_RETRACT = _UxGT("回縮"); // "Retract" - LSTR MSG_MOVE_AXIS = _UxGT("移動軸"); // "Move axis" - LSTR MSG_BED_LEVELING = _UxGT("調平熱床"); // "Bed leveling" - LSTR MSG_LEVEL_BED = _UxGT("調平熱床"); // "Level bed" - LSTR MSG_BED_TRAMMING = _UxGT("調平邊角"); // "Bed Tramming" - LSTR MSG_NEXT_CORNER = _UxGT("下個邊角"); // "Next corner" - LSTR MSG_MESH_EDITOR = _UxGT("網格編輯器"); // "Mesh Editor" - LSTR MSG_EDIT_MESH = _UxGT("編輯網格"); // "Edit Mesh" - LSTR MSG_EDITING_STOPPED = _UxGT("網格編輯已停止"); // "Mesh Editing Stopped" - LSTR MSG_PROBING_POINT = _UxGT("探測點"); // "Probing Point" - LSTR MSG_MESH_X = _UxGT("索引 X"); // "Index X" - LSTR MSG_MESH_Y = _UxGT("索引 Y"); // "Index Y" - LSTR MSG_MESH_EDIT_Z = _UxGT("Z 值"); // "Z Value" - LSTR MSG_CUSTOM_COMMANDS = _UxGT("自定命令"); // "Custom Commands" - LSTR MSG_M48_TEST = _UxGT("M48 探測測試"); // "M48 Probe Test" - LSTR MSG_M48_POINT = _UxGT("M48 探測點"); // "M48 Point" - LSTR MSG_M48_DEVIATION = _UxGT("偏差"); // "Deviation" + LSTR MSG_PREHEAT_CUSTOM = _UxGT("自定預熱"); // "Preheat Custom" + LSTR MSG_COOLDOWN = _UxGT("降溫"); // "Cooldown" + LSTR MSG_LASER_MENU = _UxGT("激光控制"); // "Laser Control" + LSTR MSG_LASER_POWER = _UxGT("激光電源"); // "Laser Power" + LSTR MSG_SPINDLE_MENU = _UxGT("主軸控告制"); // "Spindle Control" + LSTR MSG_SPINDLE_POWER = _UxGT("主軸電源"); // "Spindle Power" + LSTR MSG_SPINDLE_REVERSE = _UxGT("主軸反轉"); // "Spindle Reverse" + LSTR MSG_SWITCH_PS_ON = _UxGT("電源打開"); // "Switch power on" + LSTR MSG_SWITCH_PS_OFF = _UxGT("電源關閉"); // "Switch power off" + LSTR MSG_EXTRUDE = _UxGT("擠出"); // "Extrude" + LSTR MSG_RETRACT = _UxGT("回縮"); // "Retract" + LSTR MSG_MOVE_AXIS = _UxGT("移動軸"); // "Move axis" + LSTR MSG_BED_LEVELING = _UxGT("調平熱床"); // "Bed leveling" + LSTR MSG_LEVEL_BED = _UxGT("調平熱床"); // "Level bed" + LSTR MSG_BED_TRAMMING = _UxGT("調平邊角"); // "Bed Tramming" + LSTR MSG_NEXT_CORNER = _UxGT("下個邊角"); // "Next corner" + LSTR MSG_MESH_EDITOR = _UxGT("網格編輯器"); // "Mesh Editor" + LSTR MSG_EDIT_MESH = _UxGT("編輯網格"); // "Edit Mesh" + LSTR MSG_EDITING_STOPPED = _UxGT("網格編輯已停止"); // "Mesh Editing Stopped" + LSTR MSG_PROBING_POINT = _UxGT("探測點"); // "Probing Point" + LSTR MSG_MESH_X = _UxGT("索引 X"); // "Index X" + LSTR MSG_MESH_Y = _UxGT("索引 Y"); // "Index Y" + LSTR MSG_MESH_EDIT_Z = _UxGT("Z 值"); // "Z Value" + LSTR MSG_CUSTOM_COMMANDS = _UxGT("自定命令"); // "Custom Commands" + LSTR MSG_M48_TEST = _UxGT("M48 探測測試"); // "M48 Probe Test" + LSTR MSG_M48_POINT = _UxGT("M48 探測點"); // "M48 Point" + LSTR MSG_M48_DEVIATION = _UxGT("偏差"); // "Deviation" LSTR MSG_IDEX_MENU = _UxGT("IDEX Mode"); LSTR MSG_OFFSETS_MENU = _UxGT("Tool Offsets"); LSTR MSG_IDEX_MODE_AUTOPARK = _UxGT("Auto-Park"); @@ -117,75 +117,75 @@ namespace Language_zh_TW { LSTR MSG_IDEX_MODE_FULL_CTRL = _UxGT("Full Control"); LSTR MSG_HOTEND_OFFSET_Z = _UxGT("2nd Nozzle Z"); LSTR MSG_HOTEND_OFFSET_A = _UxGT("2nd Nozzle @"); - LSTR MSG_UBL_DOING_G29 = _UxGT("執行G29"); // "Doing G29" - LSTR MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools" - LSTR MSG_UBL_LEVEL_BED = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling" - LSTR MSG_LCD_TILTING_MESH = _UxGT("傾斜點"); // "Tilting Point" - LSTR MSG_UBL_MANUAL_MESH = _UxGT("手工建網"); // "Manually Build Mesh" - LSTR MSG_UBL_BC_INSERT = _UxGT("放置墊片並測量"); // "Place shim & measure" - LSTR MSG_UBL_BC_INSERT2 = _UxGT("測量"); // "Measure" - LSTR MSG_UBL_BC_REMOVE = _UxGT("移除並測量熱床"); // "Remove & measure bed" - LSTR MSG_UBL_MOVING_TO_NEXT = _UxGT("移動到下一個"); // "Moving to next" - LSTR MSG_UBL_ACTIVATE_MESH = _UxGT("啟動UBL"); // "Activate UBL" - LSTR MSG_UBL_DEACTIVATE_MESH = _UxGT("關閉UBL"); // "Deactivate UBL" - LSTR MSG_UBL_SET_TEMP_BED = _UxGT("置設熱床溫度"); // "Bed Temp" - LSTR MSG_UBL_BED_TEMP_CUSTOM = _UxGT("置設熱床溫度"); // "Bed Temp" - LSTR MSG_UBL_SET_TEMP_HOTEND = _UxGT("置設噴嘴溫度"); // "Hotend Temp" - LSTR MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("熱端溫度"); // "Hotend Temp" - LSTR MSG_UBL_MESH_EDIT = _UxGT("網格編輯"); // "Mesh Edit" - LSTR MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("編輯客戶網格"); // "Edit Custom Mesh" - LSTR MSG_UBL_FINE_TUNE_MESH = _UxGT("細調網格"); // "Fine Tuning Mesh" - LSTR MSG_UBL_DONE_EDITING_MESH = _UxGT("完成編輯網格"); // "Done Editing Mesh" - LSTR MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("創設客戶網格"); // "Build Custom Mesh" - LSTR MSG_UBL_BUILD_MESH_MENU = _UxGT("創設網格"); // "Build Mesh" + LSTR MSG_UBL_DOING_G29 = _UxGT("執行G29"); // "Doing G29" + LSTR MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools" + LSTR MSG_UBL_LEVEL_BED = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling" + LSTR MSG_LCD_TILTING_MESH = _UxGT("傾斜點"); // "Tilting Point" + LSTR MSG_UBL_MANUAL_MESH = _UxGT("手工建網"); // "Manually Build Mesh" + LSTR MSG_UBL_BC_INSERT = _UxGT("放置墊片並測量"); // "Place shim & measure" + LSTR MSG_UBL_BC_INSERT2 = _UxGT("測量"); // "Measure" + LSTR MSG_UBL_BC_REMOVE = _UxGT("移除並測量熱床"); // "Remove & measure bed" + LSTR MSG_UBL_MOVING_TO_NEXT = _UxGT("移動到下一個"); // "Moving to next" + LSTR MSG_UBL_ACTIVATE_MESH = _UxGT("啟動UBL"); // "Activate UBL" + LSTR MSG_UBL_DEACTIVATE_MESH = _UxGT("關閉UBL"); // "Deactivate UBL" + LSTR MSG_UBL_SET_TEMP_BED = _UxGT("置設熱床溫度"); // "Bed Temp" + LSTR MSG_UBL_BED_TEMP_CUSTOM = _UxGT("置設熱床溫度"); // "Bed Temp" + LSTR MSG_UBL_SET_TEMP_HOTEND = _UxGT("置設噴嘴溫度"); // "Hotend Temp" + LSTR MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("熱端溫度"); // "Hotend Temp" + LSTR MSG_UBL_MESH_EDIT = _UxGT("網格編輯"); // "Mesh Edit" + LSTR MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("編輯客戶網格"); // "Edit Custom Mesh" + LSTR MSG_UBL_FINE_TUNE_MESH = _UxGT("細調網格"); // "Fine Tuning Mesh" + LSTR MSG_UBL_DONE_EDITING_MESH = _UxGT("完成編輯網格"); // "Done Editing Mesh" + LSTR MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("創設客戶網格"); // "Build Custom Mesh" + LSTR MSG_UBL_BUILD_MESH_MENU = _UxGT("創設網格"); // "Build Mesh" #if HAS_PREHEAT - LSTR MSG_UBL_BUILD_MESH_M = _UxGT("創設 $ 網格"); // "Build PREHEAT_1_LABEL Mesh" - LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("批准 $ 網格"); // "Validate PREHEAT_1_LABEL Mesh" + LSTR MSG_UBL_BUILD_MESH_M = _UxGT("創設 $ 網格"); // "Build PREHEAT_1_LABEL Mesh" + LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("批准 $ 網格"); // "Validate PREHEAT_1_LABEL Mesh" #endif - LSTR MSG_UBL_BUILD_COLD_MESH = _UxGT("創設冷網格"); // "Build Cold Mesh" - LSTR MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("調整網格高度"); // "Adjust Mesh Height" - LSTR MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("高度合計"); // "Height Amount" - LSTR MSG_UBL_VALIDATE_MESH_MENU = _UxGT("批准網格"); // "Validate Mesh" - LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客戶網格"); // "Validate Custom Mesh" - LSTR MSG_G26_HEATING_BED = _UxGT("G26 加熱熱床"); // "G26 Heating Bed" + LSTR MSG_UBL_BUILD_COLD_MESH = _UxGT("創設冷網格"); // "Build Cold Mesh" + LSTR MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("調整網格高度"); // "Adjust Mesh Height" + LSTR MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("高度合計"); // "Height Amount" + LSTR MSG_UBL_VALIDATE_MESH_MENU = _UxGT("批准網格"); // "Validate Mesh" + LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客戶網格"); // "Validate Custom Mesh" + LSTR MSG_G26_HEATING_BED = _UxGT("G26 加熱熱床"); // "G26 Heating Bed" LSTR MSG_G26_HEATING_NOZZLE = _UxGT("G26 加熱噴嘴"); //"G26 Heating Nozzle" - LSTR MSG_G26_MANUAL_PRIME = _UxGT("手動填裝"); // "Manual priming..." - LSTR MSG_G26_FIXED_LENGTH = _UxGT("固定距離填裝"); // "Fixed Length Prime" - LSTR MSG_G26_PRIME_DONE = _UxGT("完成填裝"); // "Done Priming" - LSTR MSG_G26_CANCELED = _UxGT("G26已取消"); // "G26 Canceled" - LSTR MSG_G26_LEAVING = _UxGT("離開 G26"); // "Leaving G26" - LSTR MSG_UBL_CONTINUE_MESH = _UxGT("繼續熱床網格"); // "Continue Bed Mesh" - LSTR MSG_UBL_MESH_LEVELING = _UxGT("網格調平"); // "Mesh Leveling" - LSTR MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三點調平"); // "3-Point Leveling" - LSTR MSG_UBL_GRID_MESH_LEVELING = _UxGT("格子網格調平"); // "Grid Mesh Leveling" - LSTR MSG_UBL_MESH_LEVEL = _UxGT("調平網格"); // "Level Mesh" - LSTR MSG_UBL_SIDE_POINTS = _UxGT("邊點"); // "Side Points" - LSTR MSG_UBL_MAP_TYPE = _UxGT("圖類型"); // "Map Type" - LSTR MSG_UBL_OUTPUT_MAP = _UxGT("輸出網格圖"); // "Output Mesh Map" - LSTR MSG_UBL_OUTPUT_MAP_HOST = _UxGT("輸出到主機"); // "Output for Host" - LSTR MSG_UBL_OUTPUT_MAP_CSV = _UxGT("輸出到CSV"); // "Output for CSV" - LSTR MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("輸出到備份"); // "Off Printer Backup" - LSTR MSG_UBL_INFO_UBL = _UxGT("輸出UBL信息"); // "Output UBL Info" - LSTR MSG_UBL_FILLIN_AMOUNT = _UxGT("填充合計"); // "Fill-in Amount" - LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("手工填充"); // "Manual Fill-in" - LSTR MSG_UBL_SMART_FILLIN = _UxGT("聰明填充"); // "Smart Fill-in" - LSTR MSG_UBL_FILLIN_MESH = _UxGT("填充網格"); // "Fill-in Mesh" - LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("作廢所有的"); // "Invalidate All" - LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("作廢最近的"); // "Invalidate Closest" - LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("細調所有的"); // "Fine Tune All" - LSTR MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("細調最近的"); // "Fine Tune Closest" - LSTR MSG_UBL_STORAGE_MESH_MENU = _UxGT("網格存儲"); // "Mesh Storage" - LSTR MSG_UBL_STORAGE_SLOT = _UxGT("存儲槽"); // "Memory Slot" - LSTR MSG_UBL_LOAD_MESH = _UxGT("裝載熱床網格"); // "Load Bed Mesh" - LSTR MSG_UBL_SAVE_MESH = _UxGT("保存熱床網格"); // "Save Bed Mesh" - LSTR MSG_MESH_LOADED = _UxGT("網格 %i 已裝載"); // "Mesh %i loaded" - LSTR MSG_MESH_SAVED = _UxGT("網格 %i 已保存"); // "Mesh %i saved" - LSTR MSG_UBL_NO_STORAGE = _UxGT("沒有存儲"); // "No storage" - LSTR MSG_UBL_SAVE_ERROR = _UxGT("錯誤: UBL保存"); // "Err: UBL Save" - LSTR MSG_UBL_RESTORE_ERROR = _UxGT("錯誤: UBL還原"); // "Err: UBL Restore" - LSTR MSG_UBL_Z_OFFSET = _UxGT("Z-偏移:"); // "Z-Offset: " - LSTR MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped" - LSTR MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL" + LSTR MSG_G26_MANUAL_PRIME = _UxGT("手動填裝"); // "Manual priming..." + LSTR MSG_G26_FIXED_LENGTH = _UxGT("固定距離填裝"); // "Fixed Length Prime" + LSTR MSG_G26_PRIME_DONE = _UxGT("完成填裝"); // "Done Priming" + LSTR MSG_G26_CANCELED = _UxGT("G26已取消"); // "G26 Canceled" + LSTR MSG_G26_LEAVING = _UxGT("離開 G26"); // "Leaving G26" + LSTR MSG_UBL_CONTINUE_MESH = _UxGT("繼續熱床網格"); // "Continue Bed Mesh" + LSTR MSG_UBL_MESH_LEVELING = _UxGT("網格調平"); // "Mesh Leveling" + LSTR MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三點調平"); // "3-Point Leveling" + LSTR MSG_UBL_GRID_MESH_LEVELING = _UxGT("格子網格調平"); // "Grid Mesh Leveling" + LSTR MSG_UBL_MESH_LEVEL = _UxGT("調平網格"); // "Level Mesh" + LSTR MSG_UBL_SIDE_POINTS = _UxGT("邊點"); // "Side Points" + LSTR MSG_UBL_MAP_TYPE = _UxGT("圖類型"); // "Map Type" + LSTR MSG_UBL_OUTPUT_MAP = _UxGT("輸出網格圖"); // "Output Mesh Map" + LSTR MSG_UBL_OUTPUT_MAP_HOST = _UxGT("輸出到主機"); // "Output for Host" + LSTR MSG_UBL_OUTPUT_MAP_CSV = _UxGT("輸出到CSV"); // "Output for CSV" + LSTR MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("輸出到備份"); // "Off Printer Backup" + LSTR MSG_UBL_INFO_UBL = _UxGT("輸出UBL信息"); // "Output UBL Info" + LSTR MSG_UBL_FILLIN_AMOUNT = _UxGT("填充合計"); // "Fill-in Amount" + LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("手工填充"); // "Manual Fill-in" + LSTR MSG_UBL_SMART_FILLIN = _UxGT("聰明填充"); // "Smart Fill-in" + LSTR MSG_UBL_FILLIN_MESH = _UxGT("填充網格"); // "Fill-in Mesh" + LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("作廢所有的"); // "Invalidate All" + LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("作廢最近的"); // "Invalidate Closest" + LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("細調所有的"); // "Fine Tune All" + LSTR MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("細調最近的"); // "Fine Tune Closest" + LSTR MSG_UBL_STORAGE_MESH_MENU = _UxGT("網格存儲"); // "Mesh Storage" + LSTR MSG_UBL_STORAGE_SLOT = _UxGT("存儲槽"); // "Memory Slot" + LSTR MSG_UBL_LOAD_MESH = _UxGT("裝載熱床網格"); // "Load Bed Mesh" + LSTR MSG_UBL_SAVE_MESH = _UxGT("保存熱床網格"); // "Save Bed Mesh" + LSTR MSG_MESH_LOADED = _UxGT("網格 %i 已裝載"); // "Mesh %i loaded" + LSTR MSG_MESH_SAVED = _UxGT("網格 %i 已保存"); // "Mesh %i saved" + LSTR MSG_UBL_NO_STORAGE = _UxGT("沒有存儲"); // "No storage" + LSTR MSG_UBL_SAVE_ERROR = _UxGT("錯誤: UBL保存"); // "Err: UBL Save" + LSTR MSG_UBL_RESTORE_ERROR = _UxGT("錯誤: UBL還原"); // "Err: UBL Restore" + LSTR MSG_UBL_Z_OFFSET = _UxGT("Z-偏移:"); // "Z-Offset: " + LSTR MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped" + LSTR MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL" LSTR MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. 創設冷網格"); LSTR MSG_UBL_2_SMART_FILLIN = _UxGT("2. 聰明填充"); LSTR MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3. 批准網格"); @@ -194,269 +194,269 @@ namespace Language_zh_TW { LSTR MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6. 細調所有的"); LSTR MSG_UBL_7_SAVE_MESH = _UxGT("7. 保存熱床網格"); - LSTR MSG_LED_CONTROL = _UxGT("燈管控制"); // "LED Control" - LSTR MSG_LEDS = _UxGT("燈"); // "Lights" - LSTR MSG_LED_PRESETS = _UxGT("燈預置"); // "Light Presets" - LSTR MSG_SET_LEDS_RED = _UxGT("红"); // "Red" - LSTR MSG_SET_LEDS_ORANGE = _UxGT("橙"); // "Orange" - LSTR MSG_SET_LEDS_YELLOW = _UxGT("黃"); // "Yellow" - LSTR MSG_SET_LEDS_GREEN = _UxGT("綠"); // "Green" - LSTR MSG_SET_LEDS_BLUE = _UxGT("藍"); // "Blue" - LSTR MSG_SET_LEDS_INDIGO = _UxGT("青"); // "Indigo" - LSTR MSG_SET_LEDS_VIOLET = _UxGT("紫"); // "Violet" - LSTR MSG_SET_LEDS_WHITE = _UxGT("白"); // "White" - LSTR MSG_SET_LEDS_DEFAULT = _UxGT("復歸"); // "Default" - LSTR MSG_CUSTOM_LEDS = _UxGT("定制燈"); // "Custom Lights" - LSTR MSG_INTENSITY_R = _UxGT("紅飽和度"); // "Red Intensity" - LSTR MSG_INTENSITY_G = _UxGT("綠飽和度"); // "Green Intensity" - LSTR MSG_INTENSITY_B = _UxGT("藍飽和度"); // "Blue Intensity" - LSTR MSG_INTENSITY_W = _UxGT("白飽和度"); // "White Intensity" - LSTR MSG_LED_BRIGHTNESS = _UxGT("亮度"); // "Brightness" + LSTR MSG_LED_CONTROL = _UxGT("燈管控制"); // "LED Control" + LSTR MSG_LEDS = _UxGT("燈"); // "Lights" + LSTR MSG_LED_PRESETS = _UxGT("燈預置"); // "Light Presets" + LSTR MSG_SET_LEDS_RED = _UxGT("红"); // "Red" + LSTR MSG_SET_LEDS_ORANGE = _UxGT("橙"); // "Orange" + LSTR MSG_SET_LEDS_YELLOW = _UxGT("黃"); // "Yellow" + LSTR MSG_SET_LEDS_GREEN = _UxGT("綠"); // "Green" + LSTR MSG_SET_LEDS_BLUE = _UxGT("藍"); // "Blue" + LSTR MSG_SET_LEDS_INDIGO = _UxGT("青"); // "Indigo" + LSTR MSG_SET_LEDS_VIOLET = _UxGT("紫"); // "Violet" + LSTR MSG_SET_LEDS_WHITE = _UxGT("白"); // "White" + LSTR MSG_SET_LEDS_DEFAULT = _UxGT("復歸"); // "Default" + LSTR MSG_CUSTOM_LEDS = _UxGT("定制燈"); // "Custom Lights" + LSTR MSG_INTENSITY_R = _UxGT("紅飽和度"); // "Red Intensity" + LSTR MSG_INTENSITY_G = _UxGT("綠飽和度"); // "Green Intensity" + LSTR MSG_INTENSITY_B = _UxGT("藍飽和度"); // "Blue Intensity" + LSTR MSG_INTENSITY_W = _UxGT("白飽和度"); // "White Intensity" + LSTR MSG_LED_BRIGHTNESS = _UxGT("亮度"); // "Brightness" - LSTR MSG_MOVING = _UxGT("移動 ..."); // "Moving..." - LSTR MSG_FREE_XY = _UxGT("釋放 XY"); // "Free XY" - LSTR MSG_MOVE_X = _UxGT("移動X"); // "Move X" - LSTR MSG_MOVE_Y = _UxGT("移動Y"); // "Move Y" - LSTR MSG_MOVE_Z = _UxGT("移動Z"); // "Move Z" - LSTR MSG_MOVE_N = _UxGT("移動Q"); // "Move @" - LSTR MSG_MOVE_E = _UxGT("擠出機"); // "Extruder" - LSTR MSG_MOVE_EN = _UxGT("擠出機 *"); // "Extruder *" - LSTR MSG_HOTEND_TOO_COLD = _UxGT("噴嘴溫度不夠"); // "Hotend too cold" - LSTR MSG_MOVE_N_MM = _UxGT("移動 $ mm"); // "Move 0.025mm" - LSTR MSG_MOVE_01MM = _UxGT("移動 0.1 mm"); // "Move 0.1mm" - LSTR MSG_MOVE_1MM = _UxGT("移動 1 mm"); // "Move 1mm" - LSTR MSG_MOVE_10MM = _UxGT("移動 10 mm"); // "Move 10mm" - LSTR MSG_MOVE_50MM = _UxGT("移動 50 mm"); // "Move 50mm" - LSTR MSG_MOVE_100MM = _UxGT("移動 100 mm"); // "Move 100mm" - LSTR MSG_SPEED = _UxGT("速率"); // "Speed" - LSTR MSG_MESH_Z_OFFSET = _UxGT("熱床Z"); // "Bed Z" - LSTR MSG_NOZZLE = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴"); // "Nozzle" 噴嘴 + LSTR MSG_MOVING = _UxGT("移動 ..."); // "Moving..." + LSTR MSG_FREE_XY = _UxGT("釋放 XY"); // "Free XY" + LSTR MSG_MOVE_X = _UxGT("移動X"); // "Move X" + LSTR MSG_MOVE_Y = _UxGT("移動Y"); // "Move Y" + LSTR MSG_MOVE_Z = _UxGT("移動Z"); // "Move Z" + LSTR MSG_MOVE_N = _UxGT("移動Q"); // "Move @" + LSTR MSG_MOVE_E = _UxGT("擠出機"); // "Extruder" + LSTR MSG_MOVE_EN = _UxGT("擠出機 *"); // "Extruder *" + LSTR MSG_HOTEND_TOO_COLD = _UxGT("噴嘴溫度不夠"); // "Hotend too cold" + LSTR MSG_MOVE_N_MM = _UxGT("移動 $ mm"); // "Move 0.025mm" + LSTR MSG_MOVE_01MM = _UxGT("移動 0.1 mm"); // "Move 0.1mm" + LSTR MSG_MOVE_1MM = _UxGT("移動 1 mm"); // "Move 1mm" + LSTR MSG_MOVE_10MM = _UxGT("移動 10 mm"); // "Move 10mm" + LSTR MSG_MOVE_50MM = _UxGT("移動 50 mm"); // "Move 50mm" + LSTR MSG_MOVE_100MM = _UxGT("移動 100 mm"); // "Move 100mm" + LSTR MSG_SPEED = _UxGT("速率"); // "Speed" + LSTR MSG_MESH_Z_OFFSET = _UxGT("熱床Z"); // "Bed Z" + LSTR MSG_NOZZLE = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴"); // "Nozzle" 噴嘴 LSTR MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴 ~"); - LSTR MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 熱床"); // "Bed" + LSTR MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 熱床"); // "Bed" LSTR MSG_CHAMBER = _UxGT("Enclosure"); - LSTR MSG_FAN_SPEED = _UxGT("風扇速率"); // "Fan speed" + LSTR MSG_FAN_SPEED = _UxGT("風扇速率"); // "Fan speed" LSTR MSG_FAN_SPEED_N = _UxGT("風扇速率 {"); LSTR MSG_STORED_FAN_N = _UxGT("Stored Fan {"); - LSTR MSG_EXTRA_FAN_SPEED = _UxGT("額外風扇速率"); // "Extra fan speed" + LSTR MSG_EXTRA_FAN_SPEED = _UxGT("額外風扇速率"); // "Extra fan speed" LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("額外風扇速率 {"); LSTR MSG_FLOW = _UxGT("擠出速率"); - LSTR MSG_FLOW_N = _UxGT("擠出速率 ~"); // "Flow" - LSTR MSG_CONTROL = _UxGT("控制"); // "Control" - LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); // " " LCD_STR_THERMOMETER " Min" - LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); // " " LCD_STR_THERMOMETER " Max" - LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 系數"); // " " LCD_STR_THERMOMETER " Fact" - LSTR MSG_AUTOTEMP = _UxGT("自動控溫"); // "Autotemp" - LSTR MSG_LCD_ON = _UxGT("開 "); // "On" - LSTR MSG_LCD_OFF = _UxGT("關 "); // "Off" + LSTR MSG_FLOW_N = _UxGT("擠出速率 ~"); // "Flow" + LSTR MSG_CONTROL = _UxGT("控制"); // "Control" + LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); // " " LCD_STR_THERMOMETER " Min" + LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); // " " LCD_STR_THERMOMETER " Max" + LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 系數"); // " " LCD_STR_THERMOMETER " Fact" + LSTR MSG_AUTOTEMP = _UxGT("自動控溫"); // "Autotemp" + LSTR MSG_LCD_ON = _UxGT("開 "); // "On" + LSTR MSG_LCD_OFF = _UxGT("關 "); // "Off" LSTR MSG_SELECT_E = _UxGT("選擇 *"); - LSTR MSG_ACC = _UxGT("加速度"); // "Accel" acceleration - LSTR MSG_JERK = _UxGT("抖動速率"); // "Jerk" - LSTR MSG_VA_JERK = _UxGT("軸抖動速率") STR_A; // "Va-jerk" + LSTR MSG_ACC = _UxGT("加速度"); // "Accel" acceleration + LSTR MSG_JERK = _UxGT("抖動速率"); // "Jerk" + LSTR MSG_VA_JERK = _UxGT("軸抖動速率") STR_A; // "Va-jerk" LSTR MSG_VB_JERK = _UxGT("軸抖動速率") STR_B; LSTR MSG_VC_JERK = _UxGT("軸抖動速率") STR_C; LSTR MSG_VN_JERK = _UxGT("軸抖動速率@"); LSTR MSG_VE_JERK = _UxGT("擠出機抖動速率"); - LSTR MSG_MAX_SPEED = _UxGT("速度"); // "Velocity" - LSTR MSG_VMAX_A = _UxGT("最大進料速率") STR_A; // "Vmax " max_feedrate_mm_s + LSTR MSG_MAX_SPEED = _UxGT("速度"); // "Velocity" + LSTR MSG_VMAX_A = _UxGT("最大進料速率") STR_A; // "Vmax " max_feedrate_mm_s LSTR MSG_VMAX_B = _UxGT("最大進料速率") STR_B; LSTR MSG_VMAX_C = _UxGT("最大進料速率") STR_C; LSTR MSG_VMAX_N = _UxGT("最大進料速率@"); LSTR MSG_VMAX_E = _UxGT("最大進料速率E"); - LSTR MSG_VMAX_EN = _UxGT("最大進料速率 *"); // "Vmax " max_feedrate_mm_s - LSTR MSG_VMIN = _UxGT("最小進料速率"); // "Vmin" min_feedrate_mm_s - LSTR MSG_VTRAV_MIN = _UxGT("最小移動速率"); // "VTrav min" min_travel_feedrate_mm_s, (target) speed of the move - LSTR MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration" - LSTR MSG_AMAX_A = _UxGT("最大列印加速度") STR_A; // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves + LSTR MSG_VMAX_EN = _UxGT("最大進料速率 *"); // "Vmax " max_feedrate_mm_s + LSTR MSG_VMIN = _UxGT("最小進料速率"); // "Vmin" min_feedrate_mm_s + LSTR MSG_VTRAV_MIN = _UxGT("最小移動速率"); // "VTrav min" min_travel_feedrate_mm_s, (target) speed of the move + LSTR MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration" + LSTR MSG_AMAX_A = _UxGT("最大列印加速度") STR_A; // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves LSTR MSG_AMAX_B = _UxGT("最大列印加速度") STR_B; LSTR MSG_AMAX_C = _UxGT("最大列印加速度") STR_C; LSTR MSG_AMAX_N = _UxGT("最大列印加速度@"); LSTR MSG_AMAX_E = _UxGT("最大列印加速度E"); - LSTR MSG_AMAX_EN = _UxGT("最大列印加速度 *"); // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves - LSTR MSG_A_RETRACT = _UxGT("回縮加速度"); // "A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts - LSTR MSG_A_TRAVEL = _UxGT("非列印移動加速度"); // "A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves - LSTR MSG_STEPS_PER_MM = _UxGT("軸步數/mm"); // "Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 - LSTR MSG_A_STEPS = STR_A _UxGT(" 軸步數/mm"); // "Asteps/mm" axis_steps_per_mm, axis steps-per-unit G92 + LSTR MSG_AMAX_EN = _UxGT("最大列印加速度 *"); // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves + LSTR MSG_A_RETRACT = _UxGT("回縮加速度"); // "A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts + LSTR MSG_A_TRAVEL = _UxGT("非列印移動加速度"); // "A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves + LSTR MSG_STEPS_PER_MM = _UxGT("軸步數/mm"); // "Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 + LSTR MSG_A_STEPS = STR_A _UxGT(" 軸步數/mm"); // "Asteps/mm" axis_steps_per_mm, axis steps-per-unit G92 LSTR MSG_B_STEPS = STR_B _UxGT(" 軸步數/mm"); LSTR MSG_C_STEPS = STR_C _UxGT(" 軸步數/mm"); LSTR MSG_N_STEPS = _UxGT("@ 軸步數/mm"); - LSTR MSG_E_STEPS = _UxGT("擠出機步數/mm"); // "Esteps/mm" + LSTR MSG_E_STEPS = _UxGT("擠出機步數/mm"); // "Esteps/mm" LSTR MSG_EN_STEPS = _UxGT("擠出機~步數/mm"); - LSTR MSG_TEMPERATURE = _UxGT("溫度"); // "Temperature" - LSTR MSG_MOTION = _UxGT("運作"); // "Motion" - LSTR MSG_FILAMENT = _UxGT("絲料測容"); // "Filament" menu_control_volumetric - LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("測容積mm") SUPERSCRIPT_THREE; // "E in mm3" volumetric_enabled - LSTR MSG_FILAMENT_DIAM = _UxGT("絲料直徑"); // "Fil. Dia." + LSTR MSG_TEMPERATURE = _UxGT("溫度"); // "Temperature" + LSTR MSG_MOTION = _UxGT("運作"); // "Motion" + LSTR MSG_FILAMENT = _UxGT("絲料測容"); // "Filament" menu_control_volumetric + LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("測容積mm") SUPERSCRIPT_THREE; // "E in mm3" volumetric_enabled + LSTR MSG_FILAMENT_DIAM = _UxGT("絲料直徑"); // "Fil. Dia." LSTR MSG_FILAMENT_DIAM_E = _UxGT("絲料直徑 *"); - LSTR MSG_FILAMENT_UNLOAD = _UxGT("卸載 mm"); // "Unload mm" - LSTR MSG_FILAMENT_LOAD = _UxGT("装載 mm"); // "Load mm" + LSTR MSG_FILAMENT_UNLOAD = _UxGT("卸載 mm"); // "Unload mm" + LSTR MSG_FILAMENT_LOAD = _UxGT("装載 mm"); // "Load mm" LSTR MSG_ADVANCE_K = _UxGT("Advance K"); LSTR MSG_ADVANCE_K_E = _UxGT("Advance K *"); - LSTR MSG_CONTRAST = _UxGT("LCD對比度"); // "LCD contrast" - LSTR MSG_STORE_EEPROM = _UxGT("保存設置"); // "Store memory" - LSTR MSG_LOAD_EEPROM = _UxGT("載入設置"); // "Load memory" - LSTR MSG_RESTORE_DEFAULTS = _UxGT("恢復安全值"); // "Restore failsafe" - LSTR MSG_INIT_EEPROM = _UxGT("初始化設置"); // "Initialize EEPROM" - LSTR MSG_ERR_EEPROM_CRC = _UxGT("錯誤: EEPROM CRC"); // "Err: EEPROM CRC" - LSTR MSG_ERR_EEPROM_SIZE = _UxGT("錯誤: EEPROM 尺寸"); // "Err: EEPROM Index" - LSTR MSG_ERR_EEPROM_VERSION = _UxGT("錯誤: EEPROM 版本"); // "EEPROM Version" - LSTR MSG_MEDIA_UPDATE = _UxGT("媒體更新"); // "Media Update" - LSTR MSG_RESET_PRINTER = _UxGT("重置打印機"); // "Reset Printer - LSTR MSG_REFRESH = _UxGT("刷新"); // "Refresh" - LSTR MSG_INFO_SCREEN = _UxGT("資訊界面"); // "Info screen" - LSTR MSG_PREPARE = _UxGT("準備"); // "Prepare" - LSTR MSG_TUNE = _UxGT("調整"); // "Tune" - LSTR MSG_START_PRINT = _UxGT("開始列印"); // "Start Print" - LSTR MSG_BUTTON_NEXT = _UxGT("下一個"); // "Next" - LSTR MSG_BUTTON_INIT = _UxGT("初始 "); // "Init" - LSTR MSG_BUTTON_STOP = _UxGT("停止 "); // "Stop" - LSTR MSG_BUTTON_PRINT = _UxGT("列印 "); // "Print" - LSTR MSG_BUTTON_RESET = _UxGT("復歸 "); // "Reset" - LSTR MSG_BUTTON_CANCEL = _UxGT("放棄 "); // "Cancel" - LSTR MSG_BUTTON_DONE = _UxGT("確認 "); // "Done" - LSTR MSG_BUTTON_BACK = _UxGT("返回 "); // "Back" - LSTR MSG_BUTTON_PROCEED = _UxGT("繼續 "); // "Proceed" - LSTR MSG_PAUSE_PRINT = _UxGT("暫停列印"); // "Pause print" - LSTR MSG_RESUME_PRINT = _UxGT("恢復列印"); // "Resume print" - LSTR MSG_STOP_PRINT = _UxGT("停止列印"); // "Stop print" - LSTR MSG_PRINTING_OBJECT = _UxGT("列印物件"); // "Printing Object" - LSTR MSG_CANCEL_OBJECT = _UxGT("中止物件"); // "Cancel Object" - LSTR MSG_CANCEL_OBJECT_N = _UxGT("中止物件 {"); // "Cancel Object {" - LSTR MSG_OUTAGE_RECOVERY = _UxGT("中斷恢復"); // "Outage Recovery" - LSTR MSG_MEDIA_MENU = _UxGT("從記憶卡上列印"); // "Print from SD" - LSTR MSG_NO_MEDIA = _UxGT("無記憶卡"); // "No SD card" - LSTR MSG_DWELL = _UxGT("休眠 ..."); // "Sleep..." - LSTR MSG_USERWAIT = _UxGT("點擊繼續 ..."); // "Click to resume..." - LSTR MSG_PRINT_PAUSED = _UxGT("列印已暫停"); // "Print paused" - LSTR MSG_PRINTING = _UxGT("列印中 ..."); // "Printing..." - LSTR MSG_PRINT_ABORTED = _UxGT("已取消列印"); // "Print aborted" - LSTR MSG_NO_MOVE = _UxGT("無移動"); // "No move." - LSTR MSG_KILLED = _UxGT("已砍掉"); // "KILLED. " - LSTR MSG_STOPPED = _UxGT("已停止"); // "STOPPED. " - LSTR MSG_CONTROL_RETRACT = _UxGT("回縮長度mm"); // "Retract mm" retract_length, retract length (positive mm) - LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("換手回抽長度mm"); // "Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change - LSTR MSG_CONTROL_RETRACTF = _UxGT("回縮速率mm/s"); // "Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) - LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); // "Hop mm" retract_zraise, retract Z-lift - LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("回縮恢復長度mm"); // "UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) - LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("換手回縮恢復長度mm"); // "S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) - LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回縮恢復後進料速率mm/s"); // "Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) - LSTR MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V" - LSTR MSG_AUTORETRACT = _UxGT("自動回縮"); // "Auto-Retract" autoretract_enabled, - LSTR MSG_FILAMENT_SWAP_LENGTH = _UxGT("交換長度"); // "Swap Length" - LSTR MSG_FILAMENT_PURGE_LENGTH = _UxGT("清除長度"); // "Purge Length" + LSTR MSG_CONTRAST = _UxGT("LCD對比度"); // "LCD contrast" + LSTR MSG_STORE_EEPROM = _UxGT("保存設置"); // "Store memory" + LSTR MSG_LOAD_EEPROM = _UxGT("載入設置"); // "Load memory" + LSTR MSG_RESTORE_DEFAULTS = _UxGT("恢復安全值"); // "Restore failsafe" + LSTR MSG_INIT_EEPROM = _UxGT("初始化設置"); // "Initialize EEPROM" + LSTR MSG_ERR_EEPROM_CRC = _UxGT("錯誤: EEPROM CRC"); // "Err: EEPROM CRC" + LSTR MSG_ERR_EEPROM_SIZE = _UxGT("錯誤: EEPROM 尺寸"); // "Err: EEPROM Index" + LSTR MSG_ERR_EEPROM_VERSION = _UxGT("錯誤: EEPROM 版本"); // "EEPROM Version" + LSTR MSG_MEDIA_UPDATE = _UxGT("媒體更新"); // "Media Update" + LSTR MSG_RESET_PRINTER = _UxGT("重置打印機"); // "Reset Printer + LSTR MSG_REFRESH = _UxGT("刷新"); // "Refresh" + LSTR MSG_INFO_SCREEN = _UxGT("資訊界面"); // "Info screen" + LSTR MSG_PREPARE = _UxGT("準備"); // "Prepare" + LSTR MSG_TUNE = _UxGT("調整"); // "Tune" + LSTR MSG_START_PRINT = _UxGT("開始列印"); // "Start Print" + LSTR MSG_BUTTON_NEXT = _UxGT("下一個"); // "Next" + LSTR MSG_BUTTON_INIT = _UxGT("初始 "); // "Init" + LSTR MSG_BUTTON_STOP = _UxGT("停止 "); // "Stop" + LSTR MSG_BUTTON_PRINT = _UxGT("列印 "); // "Print" + LSTR MSG_BUTTON_RESET = _UxGT("復歸 "); // "Reset" + LSTR MSG_BUTTON_CANCEL = _UxGT("放棄 "); // "Cancel" + LSTR MSG_BUTTON_DONE = _UxGT("確認 "); // "Done" + LSTR MSG_BUTTON_BACK = _UxGT("返回 "); // "Back" + LSTR MSG_BUTTON_PROCEED = _UxGT("繼續 "); // "Proceed" + LSTR MSG_PAUSE_PRINT = _UxGT("暫停列印"); // "Pause print" + LSTR MSG_RESUME_PRINT = _UxGT("恢復列印"); // "Resume print" + LSTR MSG_STOP_PRINT = _UxGT("停止列印"); // "Stop print" + LSTR MSG_PRINTING_OBJECT = _UxGT("列印物件"); // "Printing Object" + LSTR MSG_CANCEL_OBJECT = _UxGT("中止物件"); // "Cancel Object" + LSTR MSG_CANCEL_OBJECT_N = _UxGT("中止物件 {"); // "Cancel Object {" + LSTR MSG_OUTAGE_RECOVERY = _UxGT("中斷恢復"); // "Outage Recovery" + LSTR MSG_MEDIA_MENU = _UxGT("從記憶卡上列印"); // "Print from SD" + LSTR MSG_NO_MEDIA = _UxGT("無記憶卡"); // "No SD card" + LSTR MSG_DWELL = _UxGT("休眠 ..."); // "Sleep..." + LSTR MSG_USERWAIT = _UxGT("點擊繼續 ..."); // "Click to resume..." + LSTR MSG_PRINT_PAUSED = _UxGT("列印已暫停"); // "Print paused" + LSTR MSG_PRINTING = _UxGT("列印中 ..."); // "Printing..." + LSTR MSG_PRINT_ABORTED = _UxGT("已取消列印"); // "Print aborted" + LSTR MSG_NO_MOVE = _UxGT("無移動"); // "No move." + LSTR MSG_KILLED = _UxGT("已砍掉"); // "KILLED. " + LSTR MSG_STOPPED = _UxGT("已停止"); // "STOPPED. " + LSTR MSG_CONTROL_RETRACT = _UxGT("回縮長度mm"); // "Retract mm" retract_length, retract length (positive mm) + LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("換手回抽長度mm"); // "Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change + LSTR MSG_CONTROL_RETRACTF = _UxGT("回縮速率mm/s"); // "Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) + LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); // "Hop mm" retract_zraise, retract Z-lift + LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("回縮恢復長度mm"); // "UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) + LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("換手回縮恢復長度mm"); // "S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) + LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回縮恢復後進料速率mm/s"); // "Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) + LSTR MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V" + LSTR MSG_AUTORETRACT = _UxGT("自動回縮"); // "Auto-Retract" autoretract_enabled, + LSTR MSG_FILAMENT_SWAP_LENGTH = _UxGT("交換長度"); // "Swap Length" + LSTR MSG_FILAMENT_PURGE_LENGTH = _UxGT("清除長度"); // "Purge Length" LSTR MSG_TOOL_CHANGE = _UxGT("交換工具"); //"Tool Change" - LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z軸提昇"); // "Z Raise" - LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("最高速度"); // "Prime Speed" - LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("收回速度"); // "Retract Speed" + LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z軸提昇"); // "Z Raise" + LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("最高速度"); // "Prime Speed" + LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("收回速度"); // "Retract Speed" LSTR MSG_NOZZLE_STANDBY = _UxGT("噴嘴待機"); //"Nozzle Standby" - LSTR MSG_FILAMENTCHANGE = _UxGT("更換絲料"); // "Change filament" + LSTR MSG_FILAMENTCHANGE = _UxGT("更換絲料"); // "Change filament" LSTR MSG_FILAMENTCHANGE_E = _UxGT("更換絲料 *"); - LSTR MSG_FILAMENTLOAD = _UxGT("裝載絲料"); // "Load filament" + LSTR MSG_FILAMENTLOAD = _UxGT("裝載絲料"); // "Load filament" LSTR MSG_FILAMENTLOAD_E = _UxGT("裝載絲料 *"); - LSTR MSG_FILAMENTUNLOAD = _UxGT("卸載絲料"); // "Unload filament" - LSTR MSG_FILAMENTUNLOAD_E = _UxGT("卸載絲料 *"); // "Unload filament" - LSTR MSG_FILAMENTUNLOAD_ALL = _UxGT("卸載全部"); // "Unload All" - LSTR MSG_INIT_MEDIA = _UxGT("初始化記憶卡"); // "Init. SD card" - LSTR MSG_ATTACH_MEDIA = _UxGT("連接記憶卡"); // "Attach Media - LSTR MSG_CHANGE_MEDIA = _UxGT("更換記憶卡"); // "Change SD card" - LSTR MSG_RELEASE_MEDIA = _UxGT("釋放媒體"); // "Release Media" - LSTR MSG_ZPROBE_OUT = _UxGT("Z探針在熱床之外"); // "Z probe out. bed" Z probe is not within the physical limits - LSTR MSG_SKEW_FACTOR = _UxGT("偏斜因數"); // "Skew Factor" + LSTR MSG_FILAMENTUNLOAD = _UxGT("卸載絲料"); // "Unload filament" + LSTR MSG_FILAMENTUNLOAD_E = _UxGT("卸載絲料 *"); // "Unload filament" + LSTR MSG_FILAMENTUNLOAD_ALL = _UxGT("卸載全部"); // "Unload All" + LSTR MSG_INIT_MEDIA = _UxGT("初始化記憶卡"); // "Init. SD card" + LSTR MSG_ATTACH_MEDIA = _UxGT("連接記憶卡"); // "Attach Media + LSTR MSG_CHANGE_MEDIA = _UxGT("更換記憶卡"); // "Change SD card" + LSTR MSG_RELEASE_MEDIA = _UxGT("釋放媒體"); // "Release Media" + LSTR MSG_ZPROBE_OUT = _UxGT("Z探針在熱床之外"); // "Z probe out. bed" Z probe is not within the physical limits + LSTR MSG_SKEW_FACTOR = _UxGT("偏斜因數"); // "Skew Factor" - LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch 自檢"); // "BLTouch Self-Test" - LSTR MSG_BLTOUCH_RESET = _UxGT("重置BLTouch"); // "Reset BLTouch" - LSTR MSG_BLTOUCH_STOW = _UxGT("裝載BLTouch"); // "Stow BLTouch" - LSTR MSG_BLTOUCH_DEPLOY = _UxGT("部署BLTouch"); // "Deploy BLTouch" + LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch 自檢"); // "BLTouch Self-Test" + LSTR MSG_BLTOUCH_RESET = _UxGT("重置BLTouch"); // "Reset BLTouch" + LSTR MSG_BLTOUCH_STOW = _UxGT("裝載BLTouch"); // "Stow BLTouch" + LSTR MSG_BLTOUCH_DEPLOY = _UxGT("部署BLTouch"); // "Deploy BLTouch" - LSTR MSG_HOME_FIRST = _UxGT("歸位 %s 先"); // "Home ... first" - LSTR MSG_ZPROBE_OFFSETS = _UxGT("探針偏移"); //Probe Offsets - LSTR MSG_ZPROBE_XOFFSET = _UxGT("探針X偏移量"); //Probe X Offset - LSTR MSG_ZPROBE_YOFFSET = _UxGT("探針Y偏移量"); //Probe Y Offset - LSTR MSG_ZPROBE_ZOFFSET = _UxGT("探針Z偏移量"); //Probe Z Offset - LSTR MSG_BABYSTEP_X = _UxGT("微量調整X軸"); // "Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts - LSTR MSG_BABYSTEP_Y = _UxGT("微量調整Y軸"); // "Babystep Y" - LSTR MSG_BABYSTEP_Z = _UxGT("微量調整Z軸"); // "Babystep Z" - LSTR MSG_BABYSTEP_TOTAL = _UxGT("總計"); // "Total" - LSTR MSG_ENDSTOP_ABORT = _UxGT("擋塊終止"); // "Endstop abort" - LSTR MSG_HEATING_FAILED_LCD = _UxGT("加熱失敗"); // "Heating failed" - LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("錯誤：冗餘溫度"); // "Err: REDUNDANT TEMP" - LSTR MSG_THERMAL_RUNAWAY = _UxGT("溫度失控"); // "THERMAL RUNAWAY" - LSTR MSG_THERMAL_RUNAWAY_BED = _UxGT("熱床溫度失控"); // "BED THERMAL RUNAWAY" - LSTR MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("機箱溫度失控"); // "CHAMBER T. RUNAWAY" - LSTR MSG_ERR_MAXTEMP = _UxGT("錯誤：最高溫度"); // "Err: MAXTEMP" - LSTR MSG_ERR_MINTEMP = _UxGT("錯誤：最低溫度"); // "Err: MINTEMP" - LSTR MSG_HALTED = _UxGT("印表機停機"); // "PRINTER HALTED" - LSTR MSG_PLEASE_RESET = _UxGT("請重置"); // "Please reset" - LSTR MSG_HEATING = _UxGT("加熱中 ..."); // "Heating..." - LSTR MSG_COOLING = _UxGT("冷卻中 ..."); // "Cooling..." - LSTR MSG_BED_HEATING = _UxGT("加熱熱床中 ..."); // "Bed Heating..." - LSTR MSG_BED_COOLING = _UxGT("熱床冷卻中 ..."); // "Bed Cooling..." - LSTR MSG_CHAMBER_HEATING = _UxGT("機箱加熱中 .."); // "Chamber Heating..." - LSTR MSG_CHAMBER_COOLING = _UxGT("機箱冷卻中 ..."); //Chamber Cooling... - LSTR MSG_DELTA_CALIBRATE = _UxGT("⊿校準"); // "Delta Calibration" - LSTR MSG_DELTA_CALIBRATE_X = _UxGT("⊿校準X"); // "Calibrate X" - LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校準Y"); // "Calibrate Y" - LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校準Z"); // "Calibrate Z" - LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校準中心"); // "Calibrate Center" - LSTR MSG_DELTA_SETTINGS = _UxGT("⊿設置"); // "Delta Settings" - LSTR MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自動校準"); // "Auto Calibration" - LSTR MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod" - LSTR MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height" - LSTR MSG_DELTA_RADIUS = _UxGT("⊿半徑"); // "Radius" - LSTR MSG_INFO_MENU = _UxGT("關於印表機"); // "About Printer" - LSTR MSG_INFO_PRINTER_MENU = _UxGT("印表機訊息"); // "Printer Info" - LSTR MSG_3POINT_LEVELING = _UxGT("三點調平"); // "3-Point Leveling" - LSTR MSG_LINEAR_LEVELING = _UxGT("線性調平"); // "Linear Leveling" - LSTR MSG_BILINEAR_LEVELING = _UxGT(" 雙線性調平"); // "Bilinear Leveling" - LSTR MSG_UBL_LEVELING = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling" - LSTR MSG_MESH_LEVELING = _UxGT("網格調平"); // "Mesh Leveling" - LSTR MSG_INFO_STATS_MENU = _UxGT("印表機統計"); // "Printer Stats" - LSTR MSG_INFO_BOARD_MENU = _UxGT("主板訊息"); // "Board Info" - LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("溫度計"); // "Thermistors" - LSTR MSG_INFO_EXTRUDERS = _UxGT(" 擠出機"); // "Extruders" - LSTR MSG_INFO_BAUDRATE = _UxGT("傳輸率"); // "Baud" - LSTR MSG_INFO_PROTOCOL = _UxGT("協議"); // "Protocol" - LSTR MSG_INFO_RUNAWAY_OFF = _UxGT("監測溫度失控:關"); // "Runaway Watch: OFF" - LSTR MSG_INFO_RUNAWAY_ON = _UxGT("監測溫度失控:開"); // "Runaway Watch: ON" + LSTR MSG_HOME_FIRST = _UxGT("歸位 %s 先"); // "Home ... first" + LSTR MSG_ZPROBE_OFFSETS = _UxGT("探針偏移"); //Probe Offsets + LSTR MSG_ZPROBE_XOFFSET = _UxGT("探針X偏移量"); //Probe X Offset + LSTR MSG_ZPROBE_YOFFSET = _UxGT("探針Y偏移量"); //Probe Y Offset + LSTR MSG_ZPROBE_ZOFFSET = _UxGT("探針Z偏移量"); //Probe Z Offset + LSTR MSG_BABYSTEP_X = _UxGT("微量調整X軸"); // "Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts + LSTR MSG_BABYSTEP_Y = _UxGT("微量調整Y軸"); // "Babystep Y" + LSTR MSG_BABYSTEP_Z = _UxGT("微量調整Z軸"); // "Babystep Z" + LSTR MSG_BABYSTEP_TOTAL = _UxGT("總計"); // "Total" + LSTR MSG_ENDSTOP_ABORT = _UxGT("擋塊終止"); // "Endstop abort" + LSTR MSG_HEATING_FAILED_LCD = _UxGT("加熱失敗"); // "Heating failed" + LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("錯誤：冗餘溫度"); // "Err: REDUNDANT TEMP" + LSTR MSG_THERMAL_RUNAWAY = _UxGT("溫度失控"); // "THERMAL RUNAWAY" + LSTR MSG_THERMAL_RUNAWAY_BED = _UxGT("熱床溫度失控"); // "BED THERMAL RUNAWAY" + LSTR MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("機箱溫度失控"); // "CHAMBER T. RUNAWAY" + LSTR MSG_ERR_MAXTEMP = _UxGT("錯誤：最高溫度"); // "Err: MAXTEMP" + LSTR MSG_ERR_MINTEMP = _UxGT("錯誤：最低溫度"); // "Err: MINTEMP" + LSTR MSG_HALTED = _UxGT("印表機停機"); // "PRINTER HALTED" + LSTR MSG_PLEASE_RESET = _UxGT("請重置"); // "Please reset" + LSTR MSG_HEATING = _UxGT("加熱中 ..."); // "Heating..." + LSTR MSG_COOLING = _UxGT("冷卻中 ..."); // "Cooling..." + LSTR MSG_BED_HEATING = _UxGT("加熱熱床中 ..."); // "Bed Heating..." + LSTR MSG_BED_COOLING = _UxGT("熱床冷卻中 ..."); // "Bed Cooling..." + LSTR MSG_CHAMBER_HEATING = _UxGT("機箱加熱中 .."); // "Chamber Heating..." + LSTR MSG_CHAMBER_COOLING = _UxGT("機箱冷卻中 ..."); //Chamber Cooling... + LSTR MSG_DELTA_CALIBRATE = _UxGT("⊿校準"); // "Delta Calibration" + LSTR MSG_DELTA_CALIBRATE_X = _UxGT("⊿校準X"); // "Calibrate X" + LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校準Y"); // "Calibrate Y" + LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校準Z"); // "Calibrate Z" + LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校準中心"); // "Calibrate Center" + LSTR MSG_DELTA_SETTINGS = _UxGT("⊿設置"); // "Delta Settings" + LSTR MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自動校準"); // "Auto Calibration" + LSTR MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod" + LSTR MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height" + LSTR MSG_DELTA_RADIUS = _UxGT("⊿半徑"); // "Radius" + LSTR MSG_INFO_MENU = _UxGT("關於印表機"); // "About Printer" + LSTR MSG_INFO_PRINTER_MENU = _UxGT("印表機訊息"); // "Printer Info" + LSTR MSG_3POINT_LEVELING = _UxGT("三點調平"); // "3-Point Leveling" + LSTR MSG_LINEAR_LEVELING = _UxGT("線性調平"); // "Linear Leveling" + LSTR MSG_BILINEAR_LEVELING = _UxGT(" 雙線性調平"); // "Bilinear Leveling" + LSTR MSG_UBL_LEVELING = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling" + LSTR MSG_MESH_LEVELING = _UxGT("網格調平"); // "Mesh Leveling" + LSTR MSG_INFO_STATS_MENU = _UxGT("印表機統計"); // "Printer Stats" + LSTR MSG_INFO_BOARD_MENU = _UxGT("主板訊息"); // "Board Info" + LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("溫度計"); // "Thermistors" + LSTR MSG_INFO_EXTRUDERS = _UxGT(" 擠出機"); // "Extruders" + LSTR MSG_INFO_BAUDRATE = _UxGT("傳輸率"); // "Baud" + LSTR MSG_INFO_PROTOCOL = _UxGT("協議"); // "Protocol" + LSTR MSG_INFO_RUNAWAY_OFF = _UxGT("監測溫度失控:關"); // "Runaway Watch: OFF" + LSTR MSG_INFO_RUNAWAY_ON = _UxGT("監測溫度失控:開"); // "Runaway Watch: ON" - LSTR MSG_CASE_LIGHT = _UxGT("外殼燈"); // "Case light" - LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("燈亮度"); // "Light BRIGHTNESS" - LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("打印機不正確"); // "The printer is incorrect" + LSTR MSG_CASE_LIGHT = _UxGT("外殼燈"); // "Case light" + LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("燈亮度"); // "Light BRIGHTNESS" + LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("打印機不正確"); // "The printer is incorrect" #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2 - LSTR MSG_INFO_PRINT_COUNT = _UxGT("列印計數"); // "Print Count" - LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("已完成"); // "Completed" - LSTR MSG_INFO_PRINT_TIME = _UxGT("總列印時間"); // "Total print time" - LSTR MSG_INFO_PRINT_LONGEST = _UxGT("最長工作時間"); // "Longest job time" - LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("總計擠出"); // "Extruded total" + LSTR MSG_INFO_PRINT_COUNT = _UxGT("列印計數"); // "Print Count" + LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("已完成"); // "Completed" + LSTR MSG_INFO_PRINT_TIME = _UxGT("總列印時間"); // "Total print time" + LSTR MSG_INFO_PRINT_LONGEST = _UxGT("最長工作時間"); // "Longest job time" + LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("總計擠出"); // "Extruded total" #else - LSTR MSG_INFO_PRINT_COUNT = _UxGT("列印數"); // "Prints" - LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); // "Completed" - LSTR MSG_INFO_PRINT_TIME = _UxGT("總共"); // "Total" - LSTR MSG_INFO_PRINT_LONGEST = _UxGT("最長"); // "Longest" - LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("已擠出"); // "Extruded" + LSTR MSG_INFO_PRINT_COUNT = _UxGT("列印數"); // "Prints" + LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); // "Completed" + LSTR MSG_INFO_PRINT_TIME = _UxGT("總共"); // "Total" + LSTR MSG_INFO_PRINT_LONGEST = _UxGT("最長"); // "Longest" + LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("已擠出"); // "Extruded" #endif - LSTR MSG_INFO_MIN_TEMP = _UxGT("最低溫度"); // "Min Temp" - LSTR MSG_INFO_MAX_TEMP = _UxGT("最高溫度"); // "Max Temp" - LSTR MSG_INFO_PSU = _UxGT("電源供應"); // "Power Supply" - LSTR MSG_DRIVE_STRENGTH = _UxGT("驅動力度"); // "Drive Strength" - LSTR MSG_DAC_PERCENT_N = _UxGT("@ 驅動 %"); //E Driver % - LSTR MSG_ERROR_TMC = _UxGT("TMC連接錯誤"); // "TMC CONNECTION ERROR" - LSTR MSG_DAC_EEPROM_WRITE = _UxGT("保存驅動設置"); // "DAC EEPROM Write" - LSTR MSG_FILAMENT_CHANGE_HEADER = _UxGT("更換絲料"); // "FILAMENT CHANGE" - LSTR MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("列印已暫停"); // "PRINT PAUSED" - LSTR MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("裝載絲料"); // "LOAD FILAMENT" - LSTR MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸載絲料"); // "UNLOAD FILAMENT" - LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢複選項:"); // "RESUME OPTIONS:" - LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more" - LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢復列印"); // "Resume print" - LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 噴嘴: "); // " Nozzle: " - LSTR MSG_RUNOUT_SENSOR = _UxGT("斷絲偵測"); // "Runout Sensor" - LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("絲距離mm"); // "Runout Dist mm" - LSTR MSG_KILL_HOMING_FAILED = _UxGT("歸原位失敗"); // "Homing failed" - LSTR MSG_LCD_PROBING_FAILED = _UxGT("探針探測失敗"); // "Probing failed" + LSTR MSG_INFO_MIN_TEMP = _UxGT("最低溫度"); // "Min Temp" + LSTR MSG_INFO_MAX_TEMP = _UxGT("最高溫度"); // "Max Temp" + LSTR MSG_INFO_PSU = _UxGT("電源供應"); // "Power Supply" + LSTR MSG_DRIVE_STRENGTH = _UxGT("驅動力度"); // "Drive Strength" + LSTR MSG_DAC_PERCENT_N = _UxGT("@ 驅動 %"); //E Driver % + LSTR MSG_ERROR_TMC = _UxGT("TMC連接錯誤"); // "TMC CONNECTION ERROR" + LSTR MSG_DAC_EEPROM_WRITE = _UxGT("保存驅動設置"); // "DAC EEPROM Write" + LSTR MSG_FILAMENT_CHANGE_HEADER = _UxGT("更換絲料"); // "FILAMENT CHANGE" + LSTR MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("列印已暫停"); // "PRINT PAUSED" + LSTR MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("裝載絲料"); // "LOAD FILAMENT" + LSTR MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸載絲料"); // "UNLOAD FILAMENT" + LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢複選項:"); // "RESUME OPTIONS:" + LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more" + LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢復列印"); // "Resume print" + LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 噴嘴: "); // " Nozzle: " + LSTR MSG_RUNOUT_SENSOR = _UxGT("斷絲偵測"); // "Runout Sensor" + LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("絲距離mm"); // "Runout Dist mm" + LSTR MSG_KILL_HOMING_FAILED = _UxGT("歸原位失敗"); // "Homing failed" + LSTR MSG_LCD_PROBING_FAILED = _UxGT("探針探測失敗"); // "Probing failed" // // Filament Change screens show up to 3 lines on a 4-line display @@ -464,31 +464,31 @@ namespace Language_zh_TW { // #if LCD_HEIGHT >= 4 LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("按下按鈕", "恢復列印")); //"Press Button to resume print" - LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停車中 ...")); // "Parking..." - LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待開始", "絲料", "變更")); // "Wait for start of the filament change" - LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下絲料")); // "Wait for filament unload" - LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入絲料", "並按鍵", "繼續 ...")); // "Insert filament and press button to continue..." - LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按鈕", "加熱噴嘴.")); // "Press button to heat nozzle." - LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加熱噴嘴", "請等待 ...")); // "Heating nozzle Please wait..." - LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "進料")); // "Wait for filament load" - LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "絲料清除")); // "Wait for filament purge" + LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停車中 ...")); // "Parking..." + LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待開始", "絲料", "變更")); // "Wait for start of the filament change" + LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下絲料")); // "Wait for filament unload" + LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入絲料", "並按鍵", "繼續 ...")); // "Insert filament and press button to continue..." + LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按鈕", "加熱噴嘴.")); // "Press button to heat nozzle." + LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加熱噴嘴", "請等待 ...")); // "Heating nozzle Please wait..." + LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "進料")); // "Wait for filament load" + LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "絲料清除")); // "Wait for filament purge" LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("按下完成","絲料清除")); //"Press button to filament purge" - LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待列印", "恢復")); // "Wait for print to resume" + LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待列印", "恢復")); // "Wait for print to resume" #else // LCD_HEIGHT < 4 - LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("按下繼續..")); // "Click to continue" - LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停車中 ...")); // "Parking..." - LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("請等待 ...")); // "Please wait..." - LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入並點擊")); // "Insert and Click" - LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("按下加熱..")); // "Click to heat" - LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加熱中 ...")); // "Heating..." - LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); // "Ejecting..." - LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("載入中 ...")); // "Loading..." - LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..." - LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("按下完成..")); // "Click to finish" - LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢復中 ...")); // "Resuming..." + LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("按下繼續..")); // "Click to continue" + LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停車中 ...")); // "Parking..." + LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("請等待 ...")); // "Please wait..." + LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入並點擊")); // "Insert and Click" + LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("按下加熱..")); // "Click to heat" + LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加熱中 ...")); // "Heating..." + LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); // "Ejecting..." + LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("載入中 ...")); // "Loading..." + LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..." + LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("按下完成..")); // "Click to finish" + LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢復中 ...")); // "Resuming..." #endif // LCD_HEIGHT < 4 - LSTR MSG_SHORT_DAY = _UxGT("天"); // "d" // One character only - LSTR MSG_SHORT_HOUR = _UxGT("時"); // "h" // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("分"); // "m" // One character only + LSTR MSG_SHORT_DAY = _UxGT("天"); // "d" // One character only + LSTR MSG_SHORT_HOUR = _UxGT("時"); // "h" // One character only + LSTR MSG_SHORT_MINUTE = _UxGT("分"); // "m" // One character only } diff --git a/Marlin/src/pins/stm32f1/pins_KEDI_CONTROLLER_V1_2.h b/Marlin/src/pins/stm32f1/pins_KEDI_CONTROLLER_V1_2.h index 494af83f59..c2865372c5 100644 --- a/Marlin/src/pins/stm32f1/pins_KEDI_CONTROLLER_V1_2.h +++ b/Marlin/src/pins/stm32f1/pins_KEDI_CONTROLLER_V1_2.h @@ -72,11 +72,11 @@ // L6470 or L6474 on SPI #if HAS_DRIVER(L6470) || HAS_DRIVER(L6474) // Shared with SPI on EXP2 - #define L6470_CHAIN_SCK_PIN PB3 - #define L6470_CHAIN_MISO_PIN PB4 - #define L6470_CHAIN_MOSI_PIN PB5 - #define L6470_CHAIN_SS_PIN PA15 - #define ENABLE_RESET_L64XX_CHIPS + #define L6470_CHAIN_SCK_PIN PB3 + #define L6470_CHAIN_MISO_PIN PB4 + #define L6470_CHAIN_MOSI_PIN PB5 + #define L6470_CHAIN_SS_PIN PA15 + #define ENABLE_RESET_L64XX_CHIPS #endif // TMC2130 on SPI