✨ Creality v2.4.S4_170 (Ender 2 Pro, HC32F460KCTA) (#26730)
This commit is contained in:
Cesar Guillermo Montiel
GitHub
parent
04c8a3138e
commit
16acb57b22
|
|
@ -519,7 +519,9 @@
|
|||
//
|
||||
// HC32 ARM Cortex-M4
|
||||
//
|
||||
|
||||
#define BOARD_AQUILA_V101 7200 // Voxelab Aquila V1.0.0/V1.0.1/V1.0.2/V1.0.3 as found in the Voxelab Aquila X2 and C2
|
||||
#define BOARD_CREALITY_ENDER2P_V24S4 7201 // Creality Ender 2 Pro v2.4.S4_170 (HC32f460kcta)
|
||||
|
||||
//
|
||||
// Custom board
|
||||
|
|
|
|||
222
Marlin/src/pins/hc32f4/pins_CREALITY_ENDER2P_V24S4.h
Normal file
222
Marlin/src/pins/hc32f4/pins_CREALITY_ENDER2P_V24S4.h
Normal file
|
|
@ -0,0 +1,222 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
//
|
||||
// Creality Ender 2 Pro v2.4.S4_170 (HC32f460kcta)
|
||||
// Derived from https://github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender2pro-hc32-2022.cfg
|
||||
//
|
||||
#include "env_validate.h"
|
||||
|
||||
#if HAS_MULTI_HOTEND || E_STEPPERS > 1
|
||||
#error "Creality v2.4.S4 only supports one hotend and E-stepper"
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "Creality v2.4.S4"
|
||||
#endif
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME "Ender 2 Pro"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Onboard crystal oscillator
|
||||
//
|
||||
#ifndef BOARD_XTAL_FREQUENCY
|
||||
#define BOARD_XTAL_FREQUENCY 8000000 // 8 MHz XTAL
|
||||
#endif
|
||||
|
||||
//
|
||||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
||||
//
|
||||
//#define DISABLE_DEBUG
|
||||
//#define DISABLE_JTAG
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define IIC_BL24CXX_EEPROM
|
||||
//#define SDCARD_EEPROM_EMULATION
|
||||
#undef NO_EEPROM_SELECTED
|
||||
#endif
|
||||
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
#define IIC_EEPROM_SDA PA12
|
||||
#define IIC_EEPROM_SCL PA11
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2K (24C16)
|
||||
#elif ENABLED(SDCARD_EEPROM_EMULATION)
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2K
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#ifndef SERVO0_PIN
|
||||
#define SERVO0_PIN PB0 // BLTouch OUT *
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PA5
|
||||
#define Y_STOP_PIN PA6
|
||||
#define Z_STOP_PIN PB0 // BLTOUCH *
|
||||
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN PB1 // BLTouch IN *
|
||||
#endif
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC15 // "Pulled-high" *
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC2
|
||||
#define X_STEP_PIN PC1
|
||||
#define X_DIR_PIN PC0
|
||||
|
||||
#define Y_ENABLE_PIN PH2
|
||||
#define Y_STEP_PIN PB9
|
||||
#define Y_DIR_PIN PB8
|
||||
|
||||
#define Z_ENABLE_PIN PB7
|
||||
#define Z_STEP_PIN PB6
|
||||
#define Z_DIR_PIN PB5
|
||||
|
||||
#define E0_ENABLE_PIN PB4
|
||||
#define E0_STEP_PIN PB3
|
||||
#define E0_DIR_PIN PA15
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC5 // HEATER1 ADC1_IN15
|
||||
#define TEMP_BED_PIN PC4 // HOT BED ADC1_IN14
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA1 // HEATER1
|
||||
#define HEATER_BED_PIN PB10 // HOT BED
|
||||
|
||||
#define FAN0_PIN PA0 // FAN0
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SD_DETECT_PIN PA10
|
||||
#define ONBOARD_SPI_DEVICE 1
|
||||
#define ONBOARD_SD_CS_PIN PC3 // SDSS
|
||||
#define ONBOARD_SDIO
|
||||
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
||||
|
||||
#ifndef LCD_SERIAL_PORT
|
||||
#define LCD_SERIAL_PORT 1
|
||||
#endif
|
||||
|
||||
//
|
||||
// SDIO Pins
|
||||
//
|
||||
#define BOARD_SDIO_D0 PC8
|
||||
#define BOARD_SDIO_D1 PC9
|
||||
#define BOARD_SDIO_D2 PC10
|
||||
#define BOARD_SDIO_D3 PC11
|
||||
#define BOARD_SDIO_CLK PC12
|
||||
#define BOARD_SDIO_CMD PD2
|
||||
#define BOARD_SDIO_DET PA10
|
||||
|
||||
//
|
||||
// USART Pins
|
||||
//
|
||||
|
||||
// Display
|
||||
#define BOARD_USART1_TX_PIN PA2 // LCD
|
||||
#define BOARD_USART1_RX_PIN PA3
|
||||
|
||||
// Host
|
||||
#define BOARD_USART2_TX_PIN PA8 // USB
|
||||
#define BOARD_USART2_RX_PIN PA7
|
||||
|
||||
// Onboard LED (HIGH = off, LOW = on)
|
||||
#ifndef LED_BUILTIN
|
||||
#define LED_BUILTIN PC3
|
||||
#endif
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
|
||||
//
|
||||
// SPI3 Pins (LCD)
|
||||
//
|
||||
#define SPI_NSS PB15 // SPI3_NSS
|
||||
#define SPI_SCK PB14 // SPI3_CLK
|
||||
#define SPI_MISO PB13 // SPI3_MISO
|
||||
#define SPI_MOSI PB12 // SPI3_MOSI
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
|
||||
/** ------
|
||||
* PC6 | 1 2 | PC7
|
||||
* PA2 | 3 4 | PC1
|
||||
* PB13 5 6 | PB14
|
||||
* PB15 | 7 8 | PB12
|
||||
* GND | 9 10 | 5V
|
||||
* ------
|
||||
* EXP1
|
||||
*/
|
||||
#define EXP1_01_PIN PC6
|
||||
#define EXP1_02_PIN PC7
|
||||
#define EXP1_03_PIN PA2
|
||||
#define EXP1_04_PIN PC1
|
||||
#define EXP1_05_PIN PB13
|
||||
#define EXP1_06_PIN PB14
|
||||
#define EXP1_07_PIN PB15
|
||||
#define EXP1_08_PIN PB12
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY) // LCD used for C2
|
||||
/** ------
|
||||
* BEEPER | 1 2 | ENC
|
||||
* EN1 | 3 4 | KILL
|
||||
* EN2 5 6 | LCD_D4
|
||||
* LCD_RS | 7 8 | LCD_EN
|
||||
* GND | 9 10 | 5V
|
||||
* ------
|
||||
*/
|
||||
#define BEEPER_PIN EXP1_01_PIN
|
||||
|
||||
#define BTN_ENC EXP1_02_PIN
|
||||
#define BTN_EN1 EXP1_03_PIN
|
||||
#define BTN_EN2 EXP1_05_PIN
|
||||
|
||||
#define LCD_PINS_RS EXP1_07_PIN
|
||||
#define LCD_PINS_EN EXP1_08_PIN
|
||||
#define LCD_PINS_D4 EXP1_06_PIN
|
||||
|
||||
#define KILL_PIN EXP1_04_PIN
|
||||
#endif
|
||||
|
|
@ -900,8 +900,11 @@
|
|||
//
|
||||
// HC32 ARM Cortex-M4
|
||||
//
|
||||
|
||||
#elif MB(AQUILA_V101)
|
||||
#include "hc32f4/pins_AQUILA_101.h" // HC32F460 env:HC32F460C_aquila_101
|
||||
#elif MB(CREALITY_ENDER2P_V24S4)
|
||||
#include "hc32f4/pins_CREALITY_ENDER2P_V24S4.h" // HC32F460 env:HC32F460C_e2p24s4
|
||||
|
||||
//
|
||||
// Custom board (with custom PIO env)
|
||||
|
|
|
|||
|
|
@ -85,3 +85,10 @@ board_build.ld_args.flash_size = 512K
|
|||
extends = HC32F460C_base
|
||||
board_build.ld_args.flash_start = 0xC000 # Bootloader start address, as logged by the bootloader on boot
|
||||
board_build.ld_args.boot_mode = secondary # Save ~1.4k of flash by compiling as secondary firmware
|
||||
|
||||
#
|
||||
# Creality Ender 2 Pro v2.4.S4_170 (HC32f460kcta) (256K Flash, 192K RAM).
|
||||
#
|
||||
[env:HC32F460C_e2p24s4]
|
||||
extends = HC32F460C_base
|
||||
board_build.ld_args.flash_start = 0x8000
|
||||
|
|
|
|||
Loading…
Reference in a new issue