diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h index 082c0412e3..c9cc8c3c67 100644 --- a/Marlin/src/pins/samd/pins_RAMPS_144.h +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -295,55 +295,55 @@ #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) // TO TEST - // #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - // #define LCD_PINS_ENABLE 51 // SID (MOSI) - // #define LCD_PINS_D4 52 // SCK (CLK) clock + //#define LCD_PINS_RS 49 // CS chip select /SS chip slave select + //#define LCD_PINS_ENABLE 51 // SID (MOSI) + //#define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) // TO TEST - // #define LCD_PINS_RS 40 - // #define LCD_PINS_ENABLE 42 - // #define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57 - // #define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58 - // #define LCD_PINS_D6 44 - // #define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56 + //#define LCD_PINS_RS 40 + //#define LCD_PINS_ENABLE 42 + //#define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57 + //#define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58 + //#define LCD_PINS_D6 44 + //#define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56 #else #if ENABLED(CR10_STOCKDISPLAY) // TO TEST - // #define LCD_PINS_RS 27 - // #define LCD_PINS_ENABLE 29 - // #define LCD_PINS_D4 25 + //#define LCD_PINS_RS 27 + //#define LCD_PINS_ENABLE 29 + //#define LCD_PINS_D4 25 #if DISABLED(NEWPANEL) // TO TEST - // #define BEEPER_PIN 37 + //#define BEEPER_PIN 37 #endif #elif ENABLED(ZONESTAR_LCD) // TO TEST - // #define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56 - // #define LCD_PINS_ENABLE 44 - // #define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55 - // #define LCD_PINS_D5 40 - // #define LCD_PINS_D6 42 - // #define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57 + //#define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56 + //#define LCD_PINS_ENABLE 44 + //#define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55 + //#define LCD_PINS_D5 40 + //#define LCD_PINS_D6 42 + //#define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57 #else #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) // TO TEST - // #define LCD_PINS_DC 25 // Set as output on init - // #define LCD_PINS_RS 27 // Pull low for 1s to init + //#define LCD_PINS_DC 25 // Set as output on init + //#define LCD_PINS_RS 27 // Pull low for 1s to init // DOGM SPI LCD Support - // #define DOGLCD_CS 16 - // #define DOGLCD_MOSI 17 - // #define DOGLCD_SCK 23 - // #define DOGLCD_A0 LCD_PINS_DC + //#define DOGLCD_CS 16 + //#define DOGLCD_MOSI 17 + //#define DOGLCD_SCK 23 + //#define DOGLCD_A0 LCD_PINS_DC #else #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 @@ -382,8 +382,8 @@ #if ENABLED(CR10_STOCKDISPLAY) // TO TEST - // #define BTN_EN1 17 - // #define BTN_EN2 23 + //#define BTN_EN1 17 + //#define BTN_EN2 23 #else #define BTN_EN1 31 #define BTN_EN2 33 @@ -397,70 +397,70 @@ #if ENABLED(BQ_LCD_SMART_CONTROLLER) // TO TEST - // #define LCD_BACKLIGHT_PIN 39 + //#define LCD_BACKLIGHT_PIN 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) // TO TEST - // #define BTN_EN1 56 // Mega/Due:64 - AGCM4:56 - // #define BTN_EN2 72 // Mega/Due:59 - AGCM4:72 - // #define BTN_ENC 55 - // #define SD_DETECT_PIN 42 + //#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56 + //#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72 + //#define BTN_ENC 55 + //#define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) // TO TEST - // #define BTN_EN1 47 - // #define BTN_EN2 43 - // #define BTN_ENC 32 - // #define LCD_SDSS SDSS - // #define KILL_PIN 41 + //#define BTN_EN1 47 + //#define BTN_EN2 43 + //#define BTN_ENC 32 + //#define LCD_SDSS SDSS + //#define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) // TO TEST - // #define BTN_EN1 40 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - // #define BTN_EN2 42 - // #define BTN_ENC -1 + //#define BTN_EN1 40 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + //#define BTN_EN2 42 + //#define BTN_ENC -1 - // #define LCD_SDSS SDSS - // #define SD_DETECT_PIN 49 + //#define LCD_SDSS SDSS + //#define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) // TO TEST - // #define DOGLCD_CS 45 - // #define DOGLCD_A0 44 - // #define LCD_SCREEN_ROT_180 + //#define DOGLCD_CS 45 + //#define DOGLCD_A0 44 + //#define LCD_SCREEN_ROT_180 - // #define BEEPER_PIN 33 - // #define STAT_LED_RED_PIN 32 - // #define STAT_LED_BLUE_PIN 35 + //#define BEEPER_PIN 33 + //#define STAT_LED_RED_PIN 32 + //#define STAT_LED_BLUE_PIN 35 - // #define BTN_EN1 22 - // #define BTN_EN2 7 - // #define BTN_ENC 39 + //#define BTN_EN1 22 + //#define BTN_EN2 7 + //#define BTN_ENC 39 - // #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board - // #define KILL_PIN 31 + //#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board + //#define KILL_PIN 31 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) // TO TEST - // #define DOGLCD_CS 29 - // #define DOGLCD_A0 27 + //#define DOGLCD_CS 29 + //#define DOGLCD_A0 27 - // #define BEEPER_PIN 23 - // #define LCD_BACKLIGHT_PIN 33 + //#define BEEPER_PIN 23 + //#define LCD_BACKLIGHT_PIN 33 - // #define BTN_EN1 35 - // #define BTN_EN2 37 - // #define BTN_ENC 31 + //#define BTN_EN1 35 + //#define BTN_EN2 37 + //#define BTN_ENC 31 - // #define LCD_SDSS SDSS - // #define SD_DETECT_PIN 49 - // #define KILL_PIN 41 + //#define LCD_SDSS SDSS + //#define SD_DETECT_PIN 49 + //#define KILL_PIN 41 #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864) @@ -476,53 +476,53 @@ #if ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 // TO TEST - // #define DOGLCD_A0 27 - // #define DOGLCD_CS 25 + //#define DOGLCD_A0 27 + //#define DOGLCD_CS 25 // GLCD features // Uncomment screen orientation - // #define LCD_SCREEN_ROT_90 - // #define LCD_SCREEN_ROT_180 - // #define LCD_SCREEN_ROT_270 + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 // not connected to a pin - // #define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57) + //#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57) - // #define BTN_EN1 31 - // #define BTN_EN2 33 + //#define BTN_EN1 31 + //#define BTN_EN2 33 #elif ENABLED(FYSETC_MINI_12864) // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 // TO TEST - // #define DOGLCD_A0 16 - // #define DOGLCD_CS 17 + //#define DOGLCD_A0 16 + //#define DOGLCD_CS 17 - // #define BTN_EN1 33 - // #define BTN_EN2 31 + //#define BTN_EN1 33 + //#define BTN_EN2 31 //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems // results in LCD soft SPI mode 3, SD soft SPI mode 0 - // #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + //#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN // TO TEST - // #define RGB_LED_R_PIN 25 + //#define RGB_LED_R_PIN 25 #endif #ifndef RGB_LED_G_PIN // TO TEST - // #define RGB_LED_G_PIN 27 + //#define RGB_LED_G_PIN 27 #endif #ifndef RGB_LED_B_PIN // TO TEST - // #define RGB_LED_B_PIN 29 + //#define RGB_LED_B_PIN 29 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) // TO TEST - // #define NEOPIXEL_PIN 25 + //#define NEOPIXEL_PIN 25 #endif #endif @@ -530,30 +530,30 @@ #elif ENABLED(MINIPANEL) // TO TEST - // #define BEEPER_PIN 42 + //#define BEEPER_PIN 42 // not connected to a pin - // #define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57) + //#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57) - // #define DOGLCD_A0 44 - // #define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58 + //#define DOGLCD_A0 44 + //#define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58 // GLCD features // Uncomment screen orientation - // #define LCD_SCREEN_ROT_90 - // #define LCD_SCREEN_ROT_180 - // #define LCD_SCREEN_ROT_270 + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 - // #define BTN_EN1 40 - // #define BTN_EN2 55 // Mega/Due:63 - AGCM4:55 - // #define BTN_ENC 72 // Mega/Due:59 - AGCM4:72 + //#define BTN_EN1 40 + //#define BTN_EN2 55 // Mega/Due:63 - AGCM4:55 + //#define BTN_ENC 72 // Mega/Due:59 - AGCM4:72 - // #define SD_DETECT_PIN 49 - // #define KILL_PIN 56 // Mega/Due:64 - AGCM4:56 + //#define SD_DETECT_PIN 49 + //#define KILL_PIN 56 // Mega/Due:64 - AGCM4:56 #elif ENABLED(ZONESTAR_LCD) // TO TEST - // #define ADC_KEYPAD_PIN 12 + //#define ADC_KEYPAD_PIN 12 #elif ENABLED(AZSMZ_12864) @@ -562,33 +562,33 @@ #else // Beeper on AUX-4 - // #define BEEPER_PIN 33 + //#define BEEPER_PIN 33 // Buttons are directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) // TO TEST - // #define SHIFT_OUT 40 - // #define SHIFT_CLK 44 - // #define SHIFT_LD 42 - // #define BTN_EN1 56 // Mega/Due:64 - AGCM4:56 - // #define BTN_EN2 72 // Mega/Due:59 - AGCM4:72 - // #define BTN_ENC 55 // Mega/Due:63 - AGCM4:55 + //#define SHIFT_OUT 40 + //#define SHIFT_CLK 44 + //#define SHIFT_LD 42 + //#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56 + //#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72 + //#define BTN_ENC 55 // Mega/Due:63 - AGCM4:55 #elif ENABLED(PANEL_ONE) // TO TEST - // #define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72) - // #define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55) - // #define BTN_ENC 49 // AUX3 PIN 7 + //#define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72) + //#define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55) + //#define BTN_ENC 49 // AUX3 PIN 7 #else // TO TEST - // #define BTN_EN1 37 - // #define BTN_EN2 35 - // #define BTN_ENC 31 + //#define BTN_EN1 37 + //#define BTN_EN2 35 + //#define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) // TO TEST - // #define SD_DETECT_PIN 49 - // #define KILL_PIN 41 + //#define SD_DETECT_PIN 49 + //#define KILL_PIN 41 #endif #endif diff --git a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h index 0f895c9e6b..cdd396bc13 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h @@ -72,7 +72,7 @@ // Heaters / Fans // #define HEATER_0_PIN 20 -// #define HEATER_1_PIN 36 +//#define HEATER_1_PIN 36 #define HEATER_BED_PIN 21 #ifndef FAN_PIN #define FAN_PIN 22