diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 42f8746aaf..17051b484c 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -355,20 +355,21 @@ #define BOARD_CREALITY_V431_D 4051 // Creality v4.3.1d (STM32F103RC / STM32F103RE) #define BOARD_CREALITY_V452 4052 // Creality v4.5.2 (STM32F103RC / STM32F103RE) #define BOARD_CREALITY_V453 4053 // Creality v4.5.3 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V24S1 4054 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7 -#define BOARD_CREALITY_V24S1_301 4055 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1 -#define BOARD_CREALITY_V25S1 4056 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro -#define BOARD_TRIGORILLA_PRO 4057 // Trigorilla Pro (STM32F103ZE) -#define BOARD_FLY_MINI 4058 // FLYmaker FLY MINI (STM32F103RC) -#define BOARD_FLSUN_HISPEED 4059 // FLSUN HiSpeedV1 (STM32F103VE) -#define BOARD_BEAST 4060 // STM32F103RE Libmaple-based controller -#define BOARD_MINGDA_MPX_ARM_MINI 4061 // STM32F103ZE Mingda MD-16 -#define BOARD_GTM32_PRO_VD 4062 // STM32F103VE controller -#define BOARD_ZONESTAR_ZM3E2 4063 // Zonestar ZM3E2 (STM32F103RC) -#define BOARD_ZONESTAR_ZM3E4 4064 // Zonestar ZM3E4 V1 (STM32F103VC) -#define BOARD_ZONESTAR_ZM3E4V2 4065 // Zonestar ZM3E4 V2 (STM32F103VC) -#define BOARD_ERYONE_ERY32_MINI 4066 // Eryone Ery32 mini (STM32F103VE) -#define BOARD_PANDA_PI_V29 4067 // Panda Pi V2.9 - Standalone (STM32F103RC) +#define BOARD_CREALITY_V521 4054 // SV04 Board +#define BOARD_CREALITY_V24S1 4055 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7 +#define BOARD_CREALITY_V24S1_301 4056 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1 +#define BOARD_CREALITY_V25S1 4057 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro +#define BOARD_TRIGORILLA_PRO 4058 // Trigorilla Pro (STM32F103ZE) +#define BOARD_FLY_MINI 4059 // FLYmaker FLY MINI (STM32F103RC) +#define BOARD_FLSUN_HISPEED 4060 // FLSUN HiSpeedV1 (STM32F103VE) +#define BOARD_BEAST 4061 // STM32F103RE Libmaple-based controller +#define BOARD_MINGDA_MPX_ARM_MINI 4062 // STM32F103ZE Mingda MD-16 +#define BOARD_GTM32_PRO_VD 4063 // STM32F103VE controller +#define BOARD_ZONESTAR_ZM3E2 4064 // Zonestar ZM3E2 (STM32F103RC) +#define BOARD_ZONESTAR_ZM3E4 4065 // Zonestar ZM3E4 V1 (STM32F103VC) +#define BOARD_ZONESTAR_ZM3E4V2 4066 // Zonestar ZM3E4 V2 (STM32F103VC) +#define BOARD_ERYONE_ERY32_MINI 4067 // Eryone Ery32 mini (STM32F103VE) +#define BOARD_PANDA_PI_V29 4068 // Panda Pi V2.9 - Standalone (STM32F103RC) // // ARM Cortex-M4F diff --git a/Marlin/src/module/thermistor/thermistor_504.h b/Marlin/src/module/thermistor/thermistor_504.h index 0724e49b9d..751bea233e 100644 --- a/Marlin/src/module/thermistor/thermistor_504.h +++ b/Marlin/src/module/thermistor/thermistor_504.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/module/thermistor/thermistor_505.h b/Marlin/src/module/thermistor/thermistor_505.h index 1377b43d24..12600f63ae 100644 --- a/Marlin/src/module/thermistor/thermistor_505.h +++ b/Marlin/src/module/thermistor/thermistor_505.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index 209529cbe1..aac8398081 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -43,6 +43,7 @@ #if NO_EEPROM_SELECTED //#define I2C_EEPROM // EEPROM on I2C-0 //#define SDCARD_EEPROM_EMULATION + //#undef NO_EEPROM_SELECTED #endif #if ENABLED(I2C_EEPROM) diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 2bd5d61334..1e7f5ec398 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -611,6 +611,8 @@ #include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F103VET6 env:ERYONE_ERY32_MINI_maple #elif MB(PANDA_PI_V29) #include "stm32f1/pins_PANDA_PI_V29.h" // STM32F103RCT6 env:PANDA_PI_V29 +#elif MB(CREALITY_V521) + #include "stm32f1/pins_CREALITY_V521.h" // STM32F103RET6 env:STM32F103RET6_creality // // ARM Cortex-M4F diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h index 56caa7d35e..ea2cc52f03 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h @@ -161,94 +161,74 @@ #define SDIO_SUPPORT #define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer -#if EITHER(CR10_STOCKDISPLAY, FYSETC_MINI_12864_2_1) +#if ANY(RET6_12864_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI) - #if ENABLED(RET6_12864_LCD) + /** + * RET6 12864 LCD + * ------ + * PC6 | 1 2 | PB2 + * PB10 | 3 4 | PB11 + * PB14 5 6 | PB13 + * PB12 | 7 8 | PB15 + * GND | 9 10 | 5V + * ------ + */ + #define EXP3_01_PIN PC6 + #define EXP3_02_PIN PB2 + #define EXP3_03_PIN PB10 + #define EXP3_04_PIN PB11 + #define EXP3_05_PIN PB14 + #define EXP3_06_PIN PB13 + #define EXP3_07_PIN PB12 + #define EXP3_08_PIN PB15 - /** - * RET6 12864 LCD - * ------ - * PC6 | 1 2 | PB2 - * PB10 | 3 4 | PB11 - * PB14 5 6 | PB13 - * PB12 | 7 8 | PB15 - * GND | 9 10 | 5V - * ------ - * EXP1 - */ - #define EXP1_01_PIN PC6 - #define EXP1_02_PIN PB2 - #define EXP1_03_PIN PB10 - #define EXP1_04_PIN PB11 - #define EXP1_05_PIN PB14 - #define EXP1_06_PIN PB13 - #define EXP1_07_PIN PB12 - #define EXP1_08_PIN PB15 +#elif EITHER(VET6_12864_LCD, DWIN_VET6_CREALITY_LCD) - #elif ENABLED(VET6_12864_LCD) + /** + * VET6 12864 LCD + * ------ + * ? | 1 2 | PC5 + * PB10 | 3 4 | ? + * PA6 5 6 | PA5 + * PA4 | 7 8 | PA7 + * GND | 9 10 | 5V + * ------ + */ + #define EXP3_01_PIN -1 + #define EXP3_02_PIN PC5 + #define EXP3_03_PIN PB10 + #define EXP3_04_PIN -1 + #define EXP3_05_PIN PA6 + #define EXP3_06_PIN PA5 + #define EXP3_07_PIN PA4 + #define EXP3_08_PIN PA7 - /** - * VET6 12864 LCD - * ------ - * ? | 1 2 | PC5 - * PB10 | 3 4 | ? - * PA6 5 6 | PA5 - * PA4 | 7 8 | PA7 - * GND | 9 10 | 5V - * ------ - * EXP1 - */ - #define EXP1_01_PIN -1 - #define EXP1_02_PIN PC5 - #define EXP1_03_PIN PB10 - #define EXP1_04_PIN -1 - #define EXP1_05_PIN PA6 - #define EXP1_06_PIN PA5 - #define EXP1_07_PIN PA4 - #define EXP1_08_PIN PA7 - - #else - #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for the LCD with the Creality V4 controller." - #endif +#elif EITHER(CR10_STOCKDISPLAY, FYSETC_MINI_12864_2_1) + #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for the LCD with the Creality V4 controller." #endif #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS EXP1_07_PIN - #define LCD_PINS_ENABLE EXP1_08_PIN - #define LCD_PINS_D4 EXP1_06_PIN + #define LCD_PINS_RS EXP3_07_PIN + #define LCD_PINS_ENABLE EXP3_08_PIN + #define LCD_PINS_D4 EXP3_06_PIN - #define BTN_ENC EXP1_02_PIN - #define BTN_EN1 EXP1_03_PIN - #define BTN_EN2 EXP1_05_PIN + #define BTN_ENC EXP3_02_PIN + #define BTN_EN1 EXP3_03_PIN + #define BTN_EN2 EXP3_05_PIN #ifndef HAS_PIN_27_BOARD - #define BEEPER_PIN EXP1_01_PIN + #define BEEPER_PIN EXP3_01_PIN #endif #elif ANY(HAS_DWIN_E3V2, IS_DWIN_MARLINUI, DWIN_VET6_CREALITY_LCD) - #if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI - // RET6 DWIN ENCODER LCD - #define EXP1_05_PIN PB14 - #define EXP1_06_PIN PB13 - #define EXP1_07_PIN PB12 - #define EXP1_08_PIN PB15 - //#define LCD_LED_PIN PB2 - #else - // VET6 DWIN ENCODER LCD - #define EXP1_05_PIN PA6 - #define EXP1_06_PIN PA5 - #define EXP1_07_PIN PA4 - #define EXP1_08_PIN PA7 - #endif - - #define BTN_ENC EXP1_05_PIN - #define BTN_EN1 EXP1_08_PIN - #define BTN_EN2 EXP1_07_PIN + #define BTN_ENC EXP3_05_PIN + #define BTN_EN1 EXP3_08_PIN + #define BTN_EN2 EXP3_07_PIN #ifndef BEEPER_PIN - #define BEEPER_PIN EXP1_06_PIN + #define BEEPER_PIN EXP3_06_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) @@ -257,8 +237,8 @@ #error "CAUTION! FYSETC_MINI_12864_2_1 and clones require wiring modifications. See 'pins_CREALITY_V4.h' for details. Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning" #endif - #if SD_CONNECTION_IS(LCD) - #error "The LCD sdcard is not connected with this configuration" + #if SD_CONNECTION_IS(LCD) + #error "The LCD SD Card is not connected with this configuration." #endif /** @@ -283,20 +263,20 @@ * Debug port EXP2 * * Needs custom cable. Connect EN2-EN2, LCD_CS-LCD_CS and so on. - * Debug port is just above EXP1, You need to add pins + * Debug port is just above EXP1. You need to add pins. * */ - #define BTN_ENC EXP1_02_PIN - #define BTN_EN1 EXP1_01_PIN - #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP3_02_PIN + #define BTN_EN1 EXP3_01_PIN + #define BTN_EN2 EXP3_06_PIN #define BEEPER_PIN -1 - #define DOGLCD_CS EXP1_03_PIN - #define DOGLCD_A0 EXP1_05_PIN - #define DOGLCD_SCK EXP1_07_PIN - #define DOGLCD_MOSI EXP1_08_PIN - #define LCD_RESET_PIN EXP1_04_PIN + #define DOGLCD_CS EXP3_03_PIN + #define DOGLCD_A0 EXP3_05_PIN + #define DOGLCD_SCK EXP3_07_PIN + #define DOGLCD_MOSI EXP3_08_PIN + #define LCD_RESET_PIN EXP3_04_PIN #define FORCE_SOFT_SPI #define LCD_BACKLIGHT_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h index 86ede843be..f3b7e4f308 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,7 +22,7 @@ #pragma once /** - * CREALITY 4.2.10 (STM32F103RE / STM32F103RC) board pin assignments + * Creality 4.2.10 (STM32F103RE / STM32F103RC) board pin assignments */ #include "env_validate.h" @@ -143,85 +143,75 @@ #define SDIO_SUPPORT #define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer +#if ANY(RET6_12864_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI) + + /** + * RET6 12864 LCD + * ------ + * PC6 | 1 2 | PB2 + * PB10 | 3 4 | PE8 + * PB14 5 6 | PB13 + * PB12 | 7 8 | PB15 + * GND | 9 10 | 5V + * ------ + */ + #define EXP3_01_PIN PC6 + #define EXP3_02_PIN PB2 + #define EXP3_03_PIN PB10 + #define EXP3_04_PIN PE8 + #define EXP3_05_PIN PB14 + #define EXP3_06_PIN PB13 + #define EXP3_07_PIN PB12 + #define EXP3_08_PIN PB15 + +#elif EITHER(VET6_12864_LCD, DWIN_VET6_CREALITY_LCD) + + /** + * VET6 12864 LCD + * ------ + * ? | 1 2 | PC5 + * PB10 | 3 4 | ? + * PA6 5 6 | PA5 + * PA4 | 7 8 | PA7 + * GND | 9 10 | 5V + * ------ + */ + #define EXP3_01_PIN -1 + #define EXP3_02_PIN PC5 + #define EXP3_03_PIN PB10 + #define EXP3_04_PIN -1 + #define EXP3_05_PIN PA6 + #define EXP3_06_PIN PA5 + #define EXP3_07_PIN PA4 + #define EXP3_08_PIN PA7 + +#endif + #if ENABLED(CR10_STOCKDISPLAY) - - #if ENABLED(RET6_12864_LCD) - - /** - * RET6 12864 LCD - * ------ - * PC6 | 1 2 | PB2 - * PB10 | 3 4 | PE8 - * PB14 5 6 | PB13 - * PB12 | 7 8 | PB15 - * GND | 9 10 | 5V - * ------ - * EXP1 - */ - #define EXP1_01_PIN PC6 - #define EXP1_02_PIN PB2 - #define EXP1_03_PIN PB10 - #define EXP1_04_PIN PE8 - #define EXP1_05_PIN PB14 - #define EXP1_06_PIN PB13 - #define EXP1_07_PIN PB12 - #define EXP1_08_PIN PB15 - - #define BEEPER_PIN EXP1_01_PIN - - #elif ENABLED(VET6_12864_LCD) - - /** - * VET6 12864 LCD - * ------ - * ? | 1 2 | PC5 - * PB10 | 3 4 | ? - * PA6 5 6 | PA5 - * PA4 | 7 8 | PA7 - * GND | 9 10 | 5V - * ------ - * EXP1 - */ - #define EXP1_01_PIN -1 - #define EXP1_02_PIN PC5 - #define EXP1_03_PIN PB10 - #define EXP1_04_PIN -1 - #define EXP1_05_PIN PA6 - #define EXP1_06_PIN PA5 - #define EXP1_07_PIN PA4 - #define EXP1_08_PIN PA7 - - #else + #if NONE(RET6_12864_LCD, VET6_12864_LCD) #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller." #endif - #define LCD_PINS_RS EXP1_07_PIN - #define LCD_PINS_ENABLE EXP1_08_PIN - #define LCD_PINS_D4 EXP1_06_PIN + #define LCD_PINS_RS EXP3_07_PIN + #define LCD_PINS_ENABLE EXP3_08_PIN + #define LCD_PINS_D4 EXP3_06_PIN - #define BTN_ENC EXP1_02_PIN - #define BTN_EN1 EXP1_03_PIN - #define BTN_EN2 EXP1_05_PIN + #define BTN_ENC EXP3_02_PIN + #define BTN_EN1 EXP3_03_PIN + #define BTN_EN2 EXP3_05_PIN -#elif HAS_DWIN_E3V2 || IS_DWIN_MARLINUI + #define BEEPER_PIN EXP3_01_PIN - // RET6 DWIN ENCODER LCD - #define BTN_ENC PB14 - #define BTN_EN1 PB15 - #define BTN_EN2 PB12 +#elif ANY(DWIN_VET6_CREALITY_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI) - //#define LCD_LED_PIN PB2 + // RET6 / VET6 DWIN ENCODER LCD + #define BTN_ENC EXP3_05_PIN + #define BTN_EN1 EXP3_08_PIN + #define BTN_EN2 EXP3_07_PIN + + //#define LCD_LED_PIN EXP3_02_PIN #ifndef BEEPER_PIN - #define BEEPER_PIN PB13 + #define BEEPER_PIN EXP3_06_PIN #endif -#elif ENABLED(DWIN_VET6_CREALITY_LCD) - - // VET6 DWIN ENCODER LCD - #define BTN_ENC PA6 - #define BTN_EN1 PA7 - #define BTN_EN2 PA4 - - #define BEEPER_PIN PA5 - #endif diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h index 46f437ecaf..1c62d19a99 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V521.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V521.h new file mode 100644 index 0000000000..d3d3685531 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V521.h @@ -0,0 +1,226 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Creality 5.2.1 (STM32F103RE) board pin assignments + */ + +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Creality v5.2.1 supports up to 2 hotends / E steppers." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Creality V521" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME "Creality V5.2.1" +#endif + +// +// EEPROM +// +#if NO_EEPROM_SELECTED + // FLASH + //#define FLASH_EEPROM_EMULATION + + // I2C + #define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 used only for display settings + #if ENABLED(IIC_BL24CXX_EEPROM) + #define IIC_EEPROM_SDA PC2 + #define IIC_EEPROM_SCL PC3 + #define MARLIN_EEPROM_SIZE 0x800 // 2K (24C16) + #else + #define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX + #define MARLIN_EEPROM_SIZE 0x800 // 2K + #endif + + #undef NO_EEPROM_SELECTED +#endif + +// +// Servos +// +#define SERVO0_PIN PD13 // BLTouch OUT + +// +// Limit Switches +// +#define X_STOP_PIN PD10 // X +#define X2_STOP_PIN PE15 // X2 +#define Y_STOP_PIN PE0 // Y +#define Z_STOP_PIN PE1 // Z +#define Z2_STOP_PIN PE2 // Z2 + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN PD12 // BLTouch IN +#endif + +// +// Filament Runout Sensor +// +#define FIL_RUNOUT_PIN PE5 // "Pulled-high" +#define FIL_RUNOUT2_PIN PE6 // "Pulled-high" + +// +// Steppers +// +#define X_ENABLE_PIN PC7 +#define X_STEP_PIN PD15 +#define X_DIR_PIN PD14 + +#define Y_ENABLE_PIN PB9 +#define Y_STEP_PIN PB7 +#define Y_DIR_PIN PB6 + +#define Z_ENABLE_PIN PB5 +#define Z_STEP_PIN PB3 +#define Z_DIR_PIN PD7 + +#define E0_ENABLE_PIN PD4 +#define E0_STEP_PIN PD1 +#define E0_DIR_PIN PD0 + +#define E1_ENABLE_PIN PE7 +#define E1_STEP_PIN PB1 +#define E1_DIR_PIN PB0 + +#define X2_ENABLE_PIN PE11 +#define X2_STEP_PIN PE9 +#define X2_DIR_PIN PE8 + +#define Z2_ENABLE_PIN PC5 +#define Z2_STEP_PIN PA7 +#define Z2_DIR_PIN PA6 + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_JTAG + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA4 // TH0 +#define TEMP_1_PIN PA5 // TH1 +#define TEMP_BED_PIN PA3 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA1 // HEATER0 +#define HEATER_1_PIN PA0 // HEATER1 +#define HEATER_BED_PIN PA2 // HOT BED + +#define FAN_PIN PB14 // FAN +#define FAN1_PIN PB12 // FAN +#define FAN_SOFT_PWM + +// +// SD Card +// +#define SD_DETECT_PIN PA8 +#define SDCARD_CONNECTION ONBOARD +#define ONBOARD_SPI_DEVICE 1 +#define ONBOARD_SD_CS_PIN PC11 // SDSS +#define SDIO_SUPPORT +#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer + +#if ANY(RET6_12864_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI) + + /** + * RET6 12864 LCD + * ------ + * PC6 | 1 2 | PB2 + * PB10 | 3 4 | PE8 + * PB14 5 6 | PB13 + * PB12 | 7 8 | PB15 + * GND | 9 10 | 5V + * ------ + */ + #define EXP3_01_PIN PC6 + #define EXP3_02_PIN PB2 + #define EXP3_03_PIN PB10 + #define EXP3_04_PIN PE8 + #define EXP3_05_PIN PB14 + #define EXP3_06_PIN PB13 + #define EXP3_07_PIN PB12 + #define EXP3_08_PIN PB15 + +#elif EITHER(VET6_12864_LCD, DWIN_VET6_CREALITY_LCD) + + /** + * VET6 12864 LCD + * ------ + * ? | 1 2 | PC5 + * PB10 | 3 4 | ? + * PA6 5 6 | PA5 + * PA4 | 7 8 | PA7 + * GND | 9 10 | 5V + * ------ + */ + #define EXP3_01_PIN -1 + #define EXP3_02_PIN PC5 + #define EXP3_03_PIN PB10 + #define EXP3_04_PIN -1 + #define EXP3_05_PIN PA6 + #define EXP3_06_PIN PA5 + #define EXP3_07_PIN PA4 + #define EXP3_08_PIN PA7 + +#endif + +#if ENABLED(CR10_STOCKDISPLAY) + #if NONE(RET6_12864_LCD, VET6_12864_LCD) + #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller." + #endif + + #define LCD_PINS_RS EXP3_07_PIN + #define LCD_PINS_ENABLE EXP3_08_PIN + #define LCD_PINS_D4 EXP3_06_PIN + + #define BTN_ENC EXP3_02_PIN + #define BTN_EN1 EXP3_03_PIN + #define BTN_EN2 EXP3_05_PIN + + #define BEEPER_PIN EXP3_01_PIN + +#elif ANY(DWIN_VET6_CREALITY_LCD, HAS_DWIN_E3V2, IS_DWIN_MARLINUI) + + // RET6 / VET6 DWIN ENCODER LCD + #define BTN_ENC EXP3_05_PIN + #define BTN_EN1 EXP3_08_PIN + #define BTN_EN2 EXP3_07_PIN + + //#define LCD_LED_PIN EXP3_02_PIN + #ifndef BEEPER_PIN + #define BEEPER_PIN EXP3_06_PIN + #endif + +#endif + +// DGUS LCDs +#if HAS_DGUS_LCD + #define LCD_SERIAL_PORT 3 +#endif diff --git a/ini/stm32f1.ini b/ini/stm32f1.ini index 49dac9e476..ecdf554328 100644 --- a/ini/stm32f1.ini +++ b/ini/stm32f1.ini @@ -467,3 +467,24 @@ board = genericSTM32F103VE board_build.variant = MARLIN_F103Vx build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=TIM1 board_upload.maximum_size = 499712 + +# +# Creality (STM32F103RET6) +# +[env:STM32F103RET6_creality] +platform = ${common_stm32f1.platform} +extends = stm32_variant +board = genericSTM32F103VE +board_build.variant = MARLIN_F103Vx +board_build.offset = 0x7000 +board_upload.offset_address = 0x08007000 +build_flags = ${stm32_variant.build_flags} + -DSS_TIMER=4 -DTIMER_SERVO=TIM5 + -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 +build_unflags = ${stm32_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC +extra_scripts = ${stm32_variant.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/random-bin.py +monitor_speed = 115200 +debug_tool = jlink +upload_protocol = jlink