diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp
index e111bcd8aa..728771d580 100644
--- a/Marlin/src/gcode/bedlevel/G26.cpp
+++ b/Marlin/src/gcode/bedlevel/G26.cpp
@@ -520,7 +520,7 @@ void GcodeSuite::G26() {
   g26.keep_heaters_on       = parser.boolval('K');
 
   // Accept 'I' if temperature presets are defined
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     const uint8_t preset_index = parser.seenval('I') ? _MIN(parser.value_byte(), PREHEAT_COUNT - 1) + 1 : 0;
   #endif
 
@@ -530,7 +530,7 @@ void GcodeSuite::G26() {
     celsius_t bedtemp = 0;
 
     // Use the 'I' index if temperature presets are defined
-    #if PREHEAT_COUNT
+    #if HAS_PREHEAT
       if (preset_index) bedtemp = ui.material_preset[preset_index - 1].bed_temp;
     #endif
 
@@ -613,7 +613,7 @@ void GcodeSuite::G26() {
   celsius_t noztemp = 0;
 
   // Accept 'I' if temperature presets are defined
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     if (preset_index) noztemp = ui.material_preset[preset_index - 1].hotend_temp;
   #endif
 
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index 30c7d926e0..fb1669c1ea 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -640,7 +640,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
       case 120: M120(); break;                                    // M120: Enable endstops
       case 121: M121(); break;                                    // M121: Disable endstops
 
-      #if PREHEAT_COUNT
+      #if HAS_PREHEAT
         case 145: M145(); break;                                  // M145: Set material heatup parameters
       #endif
 
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index 5ad4750fe4..8de15fc9c7 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -749,7 +749,7 @@ private:
     static void M193();
   #endif
 
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     static void M145();
     static void M145_report(const bool forReplay=true);
   #endif
diff --git a/Marlin/src/gcode/lcd/M145.cpp b/Marlin/src/gcode/lcd/M145.cpp
index 2dba238d3f..8dbe2fb07e 100644
--- a/Marlin/src/gcode/lcd/M145.cpp
+++ b/Marlin/src/gcode/lcd/M145.cpp
@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if PREHEAT_COUNT
+#if HAS_PREHEAT
 
 #include "../gcode.h"
 #include "../../lcd/marlinui.h"
@@ -79,4 +79,4 @@ void GcodeSuite::M145_report(const bool forReplay/*=true*/) {
   }
 }
 
-#endif // PREHEAT_COUNT
+#endif // HAS_PREHEAT
diff --git a/Marlin/src/gcode/temp/M104_M109.cpp b/Marlin/src/gcode/temp/M104_M109.cpp
index efda04def5..baaac02100 100644
--- a/Marlin/src/gcode/temp/M104_M109.cpp
+++ b/Marlin/src/gcode/temp/M104_M109.cpp
@@ -88,7 +88,7 @@ void GcodeSuite::M104_M109(const bool isM109) {
   celsius_t temp = 0;
 
   // Accept 'I' if temperature presets are defined
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     got_temp = parser.seenval('I');
     if (got_temp) {
       const uint8_t index = parser.value_byte();
diff --git a/Marlin/src/gcode/temp/M106_M107.cpp b/Marlin/src/gcode/temp/M106_M107.cpp
index 3f85c53d78..98e87c415d 100644
--- a/Marlin/src/gcode/temp/M106_M107.cpp
+++ b/Marlin/src/gcode/temp/M106_M107.cpp
@@ -32,7 +32,7 @@
   #include "../../module/planner.h"
 #endif
 
-#if PREHEAT_COUNT
+#if HAS_PREHEAT
   #include "../../lcd/marlinui.h"
 #endif
 
@@ -75,7 +75,7 @@ void GcodeSuite::M106() {
   uint16_t speed = dspeed;
 
   // Accept 'I' if temperature presets are defined
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     const bool got_preset = parser.seenval('I');
     if (got_preset) speed = ui.material_preset[_MIN(parser.value_byte(), PREHEAT_COUNT - 1)].fan_speed;
   #else
diff --git a/Marlin/src/gcode/temp/M140_M190.cpp b/Marlin/src/gcode/temp/M140_M190.cpp
index edc15b9cba..7532defccd 100644
--- a/Marlin/src/gcode/temp/M140_M190.cpp
+++ b/Marlin/src/gcode/temp/M140_M190.cpp
@@ -63,7 +63,7 @@ void GcodeSuite::M140_M190(const bool isM190) {
   celsius_t temp = 0;
 
   // Accept 'I' if temperature presets are defined
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     got_temp = parser.seenval('I');
     if (got_temp) {
       const uint8_t index = parser.value_byte();
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 6a70a5ce54..c8b6d504e2 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -2876,10 +2876,14 @@
   #elif defined(PREHEAT_1_LABEL)
     #define PREHEAT_COUNT 1
   #endif
+  #if PREHEAT_COUNT && ANY(HAS_HOTEND, HAS_HEATED_BED, HAS_FAN)
+    #define HAS_PREHEAT 1
+  #endif
 #endif
 
-#if !PREHEAT_COUNT
+#if !HAS_PREHEAT
   #undef PREHEAT_SHORTCUT_MENU_ITEM
+  #undef DGUS_PREHEAT_UI
 #endif
 
 /**
diff --git a/Marlin/src/lcd/e3v2/creality/dwin.cpp b/Marlin/src/lcd/e3v2/creality/dwin.cpp
index 5114e8a38a..a27762d71e 100644
--- a/Marlin/src/lcd/e3v2/creality/dwin.cpp
+++ b/Marlin/src/lcd/e3v2/creality/dwin.cpp
@@ -165,14 +165,9 @@ typedef struct {
 } select_t;
 
 select_t select_page{0}, select_file{0}, select_print{0}, select_prepare{0}
-         , select_control{0}, select_axis{0}, select_temp{0}, select_motion{0}, select_tune{0}
-         , select_advset{0}, select_PLA{0}, select_ABS{0}
-         , select_speed{0}
-         , select_acc{0}
-         , select_jerk{0}
-         , select_step{0}
-         , select_item{0}
-         ;
+       , select_control{0}, select_axis{0}, select_temp{0}, select_motion{0}, select_tune{0}
+       , select_advset{0}, select_PLA{0}, select_ABS{0}
+       , select_speed{0}, select_acc{0}, select_jerk{0}, select_step{0}, select_item{0};
 
 uint8_t index_file     = MROWS,
         index_prepare  = MROWS,
@@ -700,7 +695,7 @@ void Item_Prepare_Home(const uint8_t row) {
 
 #endif
 
-#if HAS_HOTEND
+#if HAS_PREHEAT
   void Item_Prepare_PLA(const uint8_t row) {
     if (HMI_IsChinese())
       Item_AreaCopy(100, 89, 151, 101, row);
@@ -715,22 +710,22 @@ void Item_Prepare_Home(const uint8_t row) {
     Draw_Menu_Line(row, ICON_PLAPreheat);
   }
 
-  void Item_Prepare_ABS(const uint8_t row) {
-    if (HMI_IsChinese())
-      Item_AreaCopy(180,  89, 233, 100, row);
-    else {
-      #ifdef USE_STRING_TITLES
-        DWIN_Draw_Label(row, F("Preheat " PREHEAT_2_LABEL));
-      #else
-        Item_AreaCopy(108,  76, 155,  87, row); // "Preheat"
-        say_abs_en(52, row);                    // "ABS"
-      #endif
+  #if PREHEAT_COUNT > 1
+    void Item_Prepare_ABS(const uint8_t row) {
+      if (HMI_IsChinese())
+        Item_AreaCopy(180,  89, 233, 100, row);
+      else {
+        #ifdef USE_STRING_TITLES
+          DWIN_Draw_Label(row, F("Preheat " PREHEAT_2_LABEL));
+        #else
+          Item_AreaCopy(108,  76, 155,  87, row); // "Preheat"
+          say_abs_en(52, row);                    // "ABS"
+        #endif
+      }
+      Draw_Menu_Line(row, ICON_ABSPreheat);
     }
-    Draw_Menu_Line(row, ICON_ABSPreheat);
-  }
-#endif
+  #endif
 
-#if HAS_PREHEAT
   void Item_Prepare_Cool(const uint8_t row) {
     if (HMI_IsChinese())
       Item_AreaCopy(1, 104,  56, 117, row);
@@ -785,11 +780,11 @@ void Draw_Prepare_Menu() {
   #if HAS_ZOFFSET_ITEM
     if (PVISI(PREPARE_CASE_ZOFF)) Item_Prepare_Offset(PSCROL(PREPARE_CASE_ZOFF)); // Edit Z-Offset / Babystep / Set Home Offset
   #endif
-  #if HAS_HOTEND
-    if (PVISI(PREPARE_CASE_PLA)) Item_Prepare_PLA(PSCROL(PREPARE_CASE_PLA));      // Preheat PLA
-    if (PVISI(PREPARE_CASE_ABS)) Item_Prepare_ABS(PSCROL(PREPARE_CASE_ABS));      // Preheat ABS
-  #endif
   #if HAS_PREHEAT
+    if (PVISI(PREPARE_CASE_PLA)) Item_Prepare_PLA(PSCROL(PREPARE_CASE_PLA));      // Preheat PLA
+    #if PREHEAT_COUNT > 1
+      if (PVISI(PREPARE_CASE_ABS)) Item_Prepare_ABS(PSCROL(PREPARE_CASE_ABS));    // Preheat ABS
+    #endif
     if (PVISI(PREPARE_CASE_COOL)) Item_Prepare_Cool(PSCROL(PREPARE_CASE_COOL));   // Cooldown
   #endif
   if (PVISI(PREPARE_CASE_LANG)) Item_Prepare_Lang(PSCROL(PREPARE_CASE_LANG));     // Language CN/EN
@@ -1425,25 +1420,34 @@ void HMI_Move_Z() {
     uint8_t temp_line;
     switch (HMI_ValueStruct.show_mode) {
       case -1: temp_line = TEMP_CASE_TEMP; break;
-      case -2: temp_line = PREHEAT_CASE_TEMP; break;
-      case -3: temp_line = PREHEAT_CASE_TEMP; break;
+      #if HAS_PREHEAT
+        case -2: temp_line = PREHEAT_CASE_TEMP; break;
+        #if PREHEAT_COUNT > 1
+          case -3: temp_line = PREHEAT_CASE_TEMP; break;
+        #endif
+      #endif
       default: temp_line = TUNE_CASE_TEMP + MROWS - index_tune;
     }
     if (Apply_Encoder(encoder_diffState, HMI_ValueStruct.E_Temp)) {
       EncoderRate.enabled = false;
-      if (HMI_ValueStruct.show_mode == -2) {
-        checkkey = PLAPreheat;
-        ui.material_preset[0].hotend_temp = HMI_ValueStruct.E_Temp;
-        Draw_Edit_Integer3(temp_line, ui.material_preset[0].hotend_temp);
-        return;
-      }
-      else if (HMI_ValueStruct.show_mode == -3) {
-        checkkey = ABSPreheat;
-        ui.material_preset[1].hotend_temp = HMI_ValueStruct.E_Temp;
-        Draw_Edit_Integer3(temp_line, ui.material_preset[1].hotend_temp);
-        return;
-      }
-      else if (HMI_ValueStruct.show_mode == -1) // Temperature
+      #if HAS_PREHEAT
+        if (HMI_ValueStruct.show_mode == -2) {
+          checkkey = PLAPreheat;
+          ui.material_preset[0].hotend_temp = HMI_ValueStruct.E_Temp;
+          Draw_Edit_Integer3(temp_line, ui.material_preset[0].hotend_temp);
+          return;
+        }
+        #if PREHEAT_COUNT > 1
+          if (HMI_ValueStruct.show_mode == -3) {
+            checkkey = ABSPreheat;
+            ui.material_preset[1].hotend_temp = HMI_ValueStruct.E_Temp;
+            Draw_Edit_Integer3(temp_line, ui.material_preset[1].hotend_temp);
+            return;
+          }
+        #endif
+      #endif
+
+      if (HMI_ValueStruct.show_mode == -1) // Temperature
         checkkey = TemperatureID;
       else
         checkkey = Tune;
@@ -1467,28 +1471,33 @@ void HMI_Move_Z() {
     uint8_t bed_line;
     switch (HMI_ValueStruct.show_mode) {
       case -1: bed_line = TEMP_CASE_BED; break;
-      case -2: bed_line = PREHEAT_CASE_BED; break;
-      case -3: bed_line = PREHEAT_CASE_BED; break;
+      #if HAS_PREHEAT
+        case -2: bed_line = PREHEAT_CASE_BED; break;
+        #if PREHEAT_COUNT > 1
+          case -3: bed_line = PREHEAT_CASE_BED; break;
+        #endif
+      #endif
       default: bed_line = TUNE_CASE_BED + MROWS - index_tune;
     }
     if (Apply_Encoder(encoder_diffState, HMI_ValueStruct.Bed_Temp)) {
       EncoderRate.enabled = false;
-      if (HMI_ValueStruct.show_mode == -2) {
-        checkkey = PLAPreheat;
-        ui.material_preset[0].bed_temp = HMI_ValueStruct.Bed_Temp;
-        Draw_Edit_Integer3(bed_line, ui.material_preset[0].bed_temp);
-        return;
-      }
-      else if (HMI_ValueStruct.show_mode == -3) {
-        checkkey = ABSPreheat;
-        ui.material_preset[1].bed_temp = HMI_ValueStruct.Bed_Temp;
-        Draw_Edit_Integer3(bed_line, ui.material_preset[1].bed_temp);
-        return;
-      }
-      else if (HMI_ValueStruct.show_mode == -1)
-        checkkey = TemperatureID;
-      else
-        checkkey = Tune;
+      #if HAS_PREHEAT
+        if (HMI_ValueStruct.show_mode == -2) {
+          checkkey = PLAPreheat;
+          ui.material_preset[0].bed_temp = HMI_ValueStruct.Bed_Temp;
+          Draw_Edit_Integer3(bed_line, ui.material_preset[0].bed_temp);
+          return;
+        }
+        #if PREHEAT_COUNT > 1
+          if (HMI_ValueStruct.show_mode == -3) {
+            checkkey = ABSPreheat;
+            ui.material_preset[1].bed_temp = HMI_ValueStruct.Bed_Temp;
+            Draw_Edit_Integer3(bed_line, ui.material_preset[1].bed_temp);
+            return;
+          }
+        #endif
+      #endif
+      checkkey = HMI_ValueStruct.show_mode == -1 ? TemperatureID : Tune;
       Draw_Edit_Integer3(bed_line, HMI_ValueStruct.Bed_Temp);
       thermalManager.setTargetBed(HMI_ValueStruct.Bed_Temp);
       return;
@@ -1522,16 +1531,15 @@ void HMI_Move_Z() {
         Draw_Edit_Integer3(fan_line, ui.material_preset[0].fan_speed);
         return;
       }
-      else if (HMI_ValueStruct.show_mode == -3) {
-        checkkey = ABSPreheat;
-        ui.material_preset[1].fan_speed = HMI_ValueStruct.Fan_speed;
-        Draw_Edit_Integer3(fan_line, ui.material_preset[1].fan_speed);
-        return;
-      }
-      else if (HMI_ValueStruct.show_mode == -1)
-        checkkey = TemperatureID;
-      else
-        checkkey = Tune;
+      #if PREHEAT_COUNT > 1
+        if (HMI_ValueStruct.show_mode == -3) {
+          checkkey = ABSPreheat;
+          ui.material_preset[1].fan_speed = HMI_ValueStruct.Fan_speed;
+          Draw_Edit_Integer3(fan_line, ui.material_preset[1].fan_speed);
+          return;
+        }
+      #endif
+      checkkey = HMI_ValueStruct.show_mode == -1 ? TemperatureID : Tune;
       Draw_Edit_Integer3(fan_line, HMI_ValueStruct.Fan_speed);
       thermalManager.set_fan_speed(0, HMI_ValueStruct.Fan_speed);
       return;
@@ -3068,7 +3076,7 @@ void HMI_Temperature() {
           EncoderRate.enabled = true;
           break;
       #endif
-      #if HAS_HOTEND
+      #if HAS_PREHEAT
         case TEMP_CASE_PLA: {
           checkkey = PLAPreheat;
           select_PLA.reset();
@@ -3145,7 +3153,8 @@ void HMI_Temperature() {
             Draw_Menu_Line(++i, ICON_WriteEEPROM);
           #endif
         } break;
-
+      #endif
+      #if PREHEAT_COUNT > 1
         case TEMP_CASE_ABS: { // ABS preheat setting
           checkkey = ABSPreheat;
           select_ABS.reset();
diff --git a/Marlin/src/lcd/e3v2/creality/dwin.h b/Marlin/src/lcd/e3v2/creality/dwin.h
index d9ac0aa5fa..3122a6fcba 100644
--- a/Marlin/src/lcd/e3v2/creality/dwin.h
+++ b/Marlin/src/lcd/e3v2/creality/dwin.h
@@ -31,13 +31,6 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if ANY(HAS_HOTEND, HAS_HEATED_BED, HAS_FAN) && PREHEAT_COUNT
-  #define HAS_PREHEAT 1
-  #if PREHEAT_COUNT < 2
-    #error "Creality DWIN requires two material preheat presets."
-  #endif
-#endif
-
 enum processID : uint8_t {
   // Process ID
   MainMenu,
@@ -53,7 +46,9 @@ enum processID : uint8_t {
   Tune,
   #if HAS_PREHEAT
     PLAPreheat,
-    ABSPreheat,
+    #if PREHEAT_COUNT > 1
+      ABSPreheat,
+    #endif
   #endif
   MaxSpeed,
   MaxSpeed_value,
diff --git a/Marlin/src/lcd/e3v2/enhanced/dwin.cpp b/Marlin/src/lcd/e3v2/enhanced/dwin.cpp
index b861b0274a..22de4d720b 100644
--- a/Marlin/src/lcd/e3v2/enhanced/dwin.cpp
+++ b/Marlin/src/lcd/e3v2/enhanced/dwin.cpp
@@ -3124,12 +3124,14 @@ void Draw_Prepare_Menu() {
         ADDMENUITEM(ICON_SetHome, GET_TEXT_F(MSG_SET_HOME_OFFSETS), onDrawHomeOffset, SetHome);
       #endif
     #endif
-    #if HAS_HOTEND
-      ADDMENUITEM(ICON_PLAPreheat, GET_TEXT_F(MSG_PREHEAT_1), onDrawPreheat1, SetPreheat0);
-      ADDMENUITEM(ICON_ABSPreheat, PSTR("Preheat " PREHEAT_2_LABEL), onDrawPreheat2, SetPreheat1);
-      ADDMENUITEM(ICON_CustomPreheat, GET_TEXT_F(MSG_PREHEAT_CUSTOM), onDrawMenuItem, SetPreheat2);
-    #endif
     #if HAS_PREHEAT
+      ADDMENUITEM(ICON_PLAPreheat, GET_TEXT_F(MSG_PREHEAT_1), onDrawPreheat1, SetPreheat0);
+      #if PREHEAT_COUNT > 1
+        ADDMENUITEM(ICON_ABSPreheat, PSTR("Preheat " PREHEAT_2_LABEL), onDrawPreheat2, SetPreheat1);
+      #endif
+      #if PREHEAT_COUNT > 2
+        ADDMENUITEM(ICON_CustomPreheat, GET_TEXT_F(MSG_PREHEAT_CUSTOM), onDrawMenuItem, SetPreheat2);
+      #endif
       ADDMENUITEM(ICON_Cool, GET_TEXT_F(MSG_COOLDOWN), onDrawCooldown, SetCoolDown);
     #endif
     ADDMENUITEM(ICON_Language, PSTR("UI Language"), onDrawLanguage, SetLanguage);
diff --git a/Marlin/src/lcd/e3v2/enhanced/dwin.h b/Marlin/src/lcd/e3v2/enhanced/dwin.h
index 0908417117..c2220c68a8 100644
--- a/Marlin/src/lcd/e3v2/enhanced/dwin.h
+++ b/Marlin/src/lcd/e3v2/enhanced/dwin.h
@@ -33,13 +33,6 @@
 #include "../common/encoder.h"
 #include "../../../libs/BL24CXX.h"
 
-#if ANY(HAS_HOTEND, HAS_HEATED_BED, HAS_FAN) && PREHEAT_COUNT
-  #define HAS_PREHEAT 1
-  #if PREHEAT_COUNT < 2
-    #error "Creality DWIN requires two material preheat presets."
-  #endif
-#endif
-
 #if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT) && DISABLED(PROBE_MANUALLY)
   #define HAS_ONESTEP_LEVELING 1
 #endif
@@ -123,12 +116,14 @@ typedef struct {
   uint16_t Barfill_Color    = Def_Barfill_Color;
   uint16_t Indicator_Color  = Def_Indicator_Color;
   uint16_t Coordinate_Color = Def_Coordinate_Color;
-  #if HAS_HOTEND
-    int16_t HotendPidT = PREHEAT_1_TEMP_HOTEND;
-    int16_t PidCycles = 10;
-  #endif
-  #ifdef PREHEAT_1_TEMP_BED
-    int16_t BedPidT = PREHEAT_1_TEMP_BED;
+  #if HAS_PREHEAT
+    #ifdef PREHEAT_1_TEMP_HOTEND
+      int16_t HotendPidT = PREHEAT_1_TEMP_HOTEND;
+      int16_t PidCycles = 10;
+    #endif
+    #ifdef PREHEAT_1_TEMP_BED
+      int16_t BedPidT = PREHEAT_1_TEMP_BED;
+    #endif
   #endif
   #if ENABLED(PREVENT_COLD_EXTRUSION)
     int16_t ExtMinT = EXTRUDE_MINTEMP;
diff --git a/Marlin/src/lcd/e3v2/jyersui/dwin.cpp b/Marlin/src/lcd/e3v2/jyersui/dwin.cpp
index 691c03af0d..9cecf202b2 100644
--- a/Marlin/src/lcd/e3v2/jyersui/dwin.cpp
+++ b/Marlin/src/lcd/e3v2/jyersui/dwin.cpp
@@ -76,10 +76,6 @@
   #include "../../../module/probe.h"
 #endif
 
-#if ANY(HAS_HOTEND, HAS_HEATED_BED, HAS_FAN) && PREHEAT_COUNT
-  #define HAS_PREHEAT 1
-#endif
-
 #if ENABLED(POWER_LOSS_RECOVERY)
   #include "../../../feature/powerloss.h"
 #endif
@@ -1593,7 +1589,7 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
 
         #define PREHEAT_BACK 0
         #define PREHEAT_MODE (PREHEAT_BACK + 1)
-        #define PREHEAT_1 (PREHEAT_MODE + (PREHEAT_COUNT >= 1))
+        #define PREHEAT_1 (PREHEAT_MODE + 1)
         #define PREHEAT_2 (PREHEAT_1 + (PREHEAT_COUNT >= 2))
         #define PREHEAT_3 (PREHEAT_2 + (PREHEAT_COUNT >= 3))
         #define PREHEAT_4 (PREHEAT_3 + (PREHEAT_COUNT >= 4))
diff --git a/Marlin/src/lcd/extui/nextion/nextion_tft.cpp b/Marlin/src/lcd/extui/nextion/nextion_tft.cpp
index 99211a220c..2c1bde245c 100644
--- a/Marlin/src/lcd/extui/nextion/nextion_tft.cpp
+++ b/Marlin/src/lcd/extui/nextion/nextion_tft.cpp
@@ -335,7 +335,7 @@ void NextionTFT::PanelInfo(uint8_t req) {
     break;
 
   case 29: // Preheat
-    #if PREHEAT_COUNT
+    #if HAS_PREHEAT
       if (!isPrinting()) {
         // Preheat PLA
         if (nextion_command[4] == 'P') {
@@ -560,7 +560,7 @@ void NextionTFT::PanelAction(uint8_t req) {
       break;
 
     case 63: // Preheat // Temps defined in configuration.h
-      #if PREHEAT_COUNT
+      #if HAS_PREHEAT
         if (!isPrinting()) switch (nextion_command[4]) {
           // Preheat PLA
           case 'P':
diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp
index 72dab6f35e..7358cbce23 100644
--- a/Marlin/src/lcd/extui/ui_api.cpp
+++ b/Marlin/src/lcd/extui/ui_api.cpp
@@ -705,7 +705,7 @@ namespace ExtUI {
     uint8_t getIDEX_Mode() { return dual_x_carriage_mode; }
   #endif
 
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     uint16_t getMaterial_preset_E(const uint16_t index) { return ui.material_preset[index].hotend_temp; }
     #if HAS_HEATED_BED
       uint16_t getMaterial_preset_B(const uint16_t index) { return ui.material_preset[index].bed_temp; }
diff --git a/Marlin/src/lcd/extui/ui_api.h b/Marlin/src/lcd/extui/ui_api.h
index 7e899221ad..04a298ba58 100644
--- a/Marlin/src/lcd/extui/ui_api.h
+++ b/Marlin/src/lcd/extui/ui_api.h
@@ -148,7 +148,7 @@ namespace ExtUI {
 
   uint32_t getProgress_seconds_elapsed();
 
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     uint16_t getMaterial_preset_E(const uint16_t);
     #if HAS_HEATED_BED
       uint16_t getMaterial_preset_B(const uint16_t);
diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h
index 4669f0c233..8e4ff0e95c 100644
--- a/Marlin/src/lcd/language/language_an.h
+++ b/Marlin/src/lcd/language/language_an.h
@@ -56,7 +56,7 @@ namespace Language_an {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Achustar desfases");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Desfase aplicau");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Establir orichen");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Precalentar ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Precalentar ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Precal. ") PREHEAT_1_LABEL _UxGT(" Boquilla");
diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h
index 3d332ca058..05209f7718 100644
--- a/Marlin/src/lcd/language/language_bg.h
+++ b/Marlin/src/lcd/language/language_bg.h
@@ -45,7 +45,7 @@ namespace Language_bg {
   LSTR MSG_AUTO_HOME                      = _UxGT("Паркиране");
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Задай Начало");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Изходна точка");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Подгряване ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Подгряване ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Подгряване ") PREHEAT_1_LABEL _UxGT(" Дюза");
diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h
index c8f0d26a32..6fba76a552 100644
--- a/Marlin/src/lcd/language/language_ca.h
+++ b/Marlin/src/lcd/language/language_ca.h
@@ -54,7 +54,7 @@ namespace Language_ca {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Ajusta decalatge");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Decalatge aplicat");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Estableix origen");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Preescalfa ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Preescalfa ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Preescalfa ") PREHEAT_1_LABEL _UxGT(" End");
diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h
index fd064b0834..596591e0f6 100644
--- a/Marlin/src/lcd/language/language_cz.h
+++ b/Marlin/src/lcd/language/language_cz.h
@@ -78,7 +78,7 @@ namespace Language_cz {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Nastavit ofsety");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Ofsety nastaveny");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Nastavit počátek");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Zahřát ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Zahřát ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Zahřát ") PREHEAT_1_LABEL _UxGT(" end");
@@ -153,7 +153,7 @@ namespace Language_cz {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Konec úprav sítě");
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Vlastní síť");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Vytvořit síť");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Síť bodů $");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Kontrola sítě $");
   #endif
diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h
index ef11906ed6..e032605578 100644
--- a/Marlin/src/lcd/language/language_da.h
+++ b/Marlin/src/lcd/language/language_da.h
@@ -48,7 +48,7 @@ namespace Language_da {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Sæt forsk. af home");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Forsk. er nu aktiv");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Sæt origin");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Forvarm ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Forvarm ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" end");
diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h
index 8160ad4724..613880caa6 100644
--- a/Marlin/src/lcd/language/language_de.h
+++ b/Marlin/src/lcd/language/language_de.h
@@ -69,7 +69,7 @@ namespace Language_de {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Setze Homeversatz");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Homeversatz aktiv");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Setze Nullpunkte"); //"G92 X0 Y0 Z0" commented out in marlinui.cpp
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = PREHEAT_1_LABEL _UxGT(" Vorwärmen");
     LSTR MSG_PREHEAT_1_H                  = PREHEAT_1_LABEL _UxGT(" Vorwärmen ~");
     LSTR MSG_PREHEAT_1_END                = PREHEAT_1_LABEL _UxGT(" Extr. Vorwärmen");
@@ -144,7 +144,7 @@ namespace Language_de {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Bearbeitung beendet");
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Eigenes Netz erst.");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Netz erstellen");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("$ Netz erstellen");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("$ Netz validieren");
   #endif
diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h
index 21f5ca6503..3d1a79ea92 100644
--- a/Marlin/src/lcd/language/language_el.h
+++ b/Marlin/src/lcd/language/language_el.h
@@ -65,7 +65,7 @@ namespace Language_el {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Ορισμός μετατοπίσεων");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Εφαρμογή μετατοπίσεων");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Ορισμός προέλευσης");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" End");
diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h
index 5259962f02..53e3ee3b94 100644
--- a/Marlin/src/lcd/language/language_el_gr.h
+++ b/Marlin/src/lcd/language/language_el_gr.h
@@ -54,7 +54,7 @@ namespace Language_el_gr {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Ορισμός βασικών μετατοπίσεων");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Εφαρμόστηκαν οι μετατοπίσεις");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Ορισμός προέλευσης");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Προθέρμανση ") PREHEAT_1_LABEL _UxGT(" End");
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index c9413d3cea..8af60c1642 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -104,7 +104,7 @@ namespace Language_en {
   LSTR MSG_TRAMMING_WIZARD                = _UxGT("Tramming Wizard");
   LSTR MSG_SELECT_ORIGIN                  = _UxGT("Select Origin");
   LSTR MSG_LAST_VALUE_SP                  = _UxGT("Last value ");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Preheat ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Preheat ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End");
diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h
index 62dd69b526..38f21985ec 100644
--- a/Marlin/src/lcd/language/language_es.h
+++ b/Marlin/src/lcd/language/language_es.h
@@ -73,7 +73,7 @@ namespace Language_es {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Ajustar desfases");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Desfase aplicada");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Establecer origen");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Precal. ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Precal. ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Precal. ") PREHEAT_1_LABEL _UxGT(" Fusor");
@@ -147,7 +147,7 @@ namespace Language_es {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Term. edici. Mallado");
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Crear Mallado Pers.");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Crear Mallado");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Crear Mallado ($)");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Valid. Mall. ($)");
   #endif
diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h
index fc8f2e0f62..adc812f6ff 100644
--- a/Marlin/src/lcd/language/language_eu.h
+++ b/Marlin/src/lcd/language/language_eu.h
@@ -57,7 +57,7 @@ namespace Language_eu {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Etxe. offset eza.");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Offsetak ezarrita");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Hasiera ipini");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Berotu ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Berotu ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Berotu ") PREHEAT_1_LABEL _UxGT(" Amaia");
@@ -100,7 +100,7 @@ namespace Language_eu {
   LSTR MSG_UBL_MESH_EDIT                  = _UxGT("Sarea editatu");
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Sarea editatzea eginda");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Sarea sortu");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("$ sarea sortu");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("$ sarea balioetsi");
   #endif
diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h
index 075b5b2744..62f3aae807 100644
--- a/Marlin/src/lcd/language/language_fi.h
+++ b/Marlin/src/lcd/language/language_fi.h
@@ -44,7 +44,7 @@ namespace Language_fi {
   LSTR MSG_DISABLE_STEPPERS               = _UxGT("Vapauta moottorit");
   LSTR MSG_AUTO_HOME                      = _UxGT("Aja referenssiin");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Aseta origo");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Esilämmitä ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Esilämmitä ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Esilä. ") PREHEAT_1_LABEL _UxGT("Suutin");
diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h
index 77472e4fbb..e9c55ed401 100644
--- a/Marlin/src/lcd/language/language_fr.h
+++ b/Marlin/src/lcd/language/language_fr.h
@@ -82,7 +82,7 @@ namespace Language_fr {
   LSTR MSG_TRAMMING_WIZARD                = _UxGT("Assistant Molettes");
   LSTR MSG_SELECT_ORIGIN                  = _UxGT("Molette du lit"); // Not a selection of the origin
   LSTR MSG_LAST_VALUE_SP                  = _UxGT("Ecart origine ");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Préchauffage ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Préchauffage ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Préch. ") PREHEAT_1_LABEL _UxGT(" buse");
@@ -162,7 +162,7 @@ namespace Language_fr {
   LSTR MSG_UBL_FINE_TUNE_MESH             = _UxGT("Réglage fin");
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Terminer");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Créer la grille");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Créer grille $");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Impr. grille $");
   #endif
diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h
index 0252cf30ec..c17faa7014 100644
--- a/Marlin/src/lcd/language/language_gl.h
+++ b/Marlin/src/lcd/language/language_gl.h
@@ -70,7 +70,7 @@ namespace Language_gl {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Axustar Desfases");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Desfases aplicados");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Fixar orixe");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Prequentar ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Prequentar ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Preque. ") PREHEAT_1_LABEL _UxGT(" Bico");
@@ -144,7 +144,7 @@ namespace Language_gl {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Fin Edición da Malla");
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Crear Malla Person.");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Crear Malla");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Crear Malla ($)");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Validar Malla ($)");
   #endif
diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h
index e828b489f6..23be8abbb1 100644
--- a/Marlin/src/lcd/language/language_hr.h
+++ b/Marlin/src/lcd/language/language_hr.h
@@ -54,7 +54,7 @@ namespace Language_hr {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Postavi home offsete");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Offsets postavljeni");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Postavi ishodište");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Predgrij ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Predgrij ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Predgrij ") PREHEAT_1_LABEL _UxGT(" Dizna");
diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h
index 4028ab10cd..faa313e48a 100644
--- a/Marlin/src/lcd/language/language_hu.h
+++ b/Marlin/src/lcd/language/language_hu.h
@@ -89,7 +89,7 @@ namespace Language_hu {
   LSTR MSG_TRAMMING_WIZARD                = _UxGT("Elektromos varázsló");
   LSTR MSG_SELECT_ORIGIN                  = _UxGT("Eredeti választása");
   LSTR MSG_LAST_VALUE_SP                  = _UxGT("Utolsó érték ");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Fütés ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Fütés ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Fütés ") PREHEAT_1_LABEL _UxGT(" Fej");
diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h
index 2e2529a845..44ae49b519 100644
--- a/Marlin/src/lcd/language/language_it.h
+++ b/Marlin/src/lcd/language/language_it.h
@@ -95,7 +95,7 @@ namespace Language_it {
   LSTR MSG_TRAMMING_WIZARD                = _UxGT("Wizard Tramming");
   LSTR MSG_SELECT_ORIGIN                  = _UxGT("Selez. origine");
   LSTR MSG_LAST_VALUE_SP                  = _UxGT("Ultimo valore ");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Preriscalda ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Preriscalda ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Preris.") PREHEAT_1_LABEL _UxGT(" Ugello");
@@ -186,7 +186,7 @@ namespace Language_it {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Modif.Mesh fatta");
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Crea Mesh personal.");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Crea Mesh");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Crea Mesh ($)");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Valida Mesh ($)");
   #endif
diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h
index 1d291ed3ad..16e605cc25 100644
--- a/Marlin/src/lcd/language/language_jp_kana.h
+++ b/Marlin/src/lcd/language/language_jp_kana.h
@@ -62,7 +62,7 @@ namespace Language_jp_kana {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("キジュンオフセットセッテイ");         // "Set home offsets"
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("オフセットガテキヨウサレマシタ");       // "Offsets applied"
   LSTR MSG_SET_ORIGIN                     = _UxGT("キジュンセット");                 // "Set origin"
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = PREHEAT_1_LABEL _UxGT(" ヨネツ");       // "Preheat " PREHEAT_1_LABEL
     LSTR MSG_PREHEAT_1_H                  = PREHEAT_1_LABEL _UxGT(" ヨネツ ~");       // "Preheat " PREHEAT_1_LABEL
     LSTR MSG_PREHEAT_1_END                = PREHEAT_1_LABEL _UxGT(" ヨネツノズル");  // " Nozzle"
diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h
index 4ecdd5bb2d..50c73f69e9 100644
--- a/Marlin/src/lcd/language/language_ko_KR.h
+++ b/Marlin/src/lcd/language/language_ko_KR.h
@@ -54,7 +54,7 @@ namespace Language_ko_KR {
   LSTR MSG_LEVEL_BED_WAITING              = _UxGT("누르면 시작합니다");
   LSTR MSG_LEVEL_BED_NEXT_POINT           = _UxGT("다음 Point");
   LSTR MSG_LEVEL_BED_DONE                 = _UxGT("레벨링 완료!");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("예열하기 - ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("예열하기 - ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("예열하기 - ") PREHEAT_1_LABEL _UxGT(" 노즐");
diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h
index b44d09d07c..42df92b880 100644
--- a/Marlin/src/lcd/language/language_nl.h
+++ b/Marlin/src/lcd/language/language_nl.h
@@ -54,7 +54,7 @@ namespace Language_nl {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Zet home offsets");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("H offset toegep.");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Nulpunt instellen");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = PREHEAT_1_LABEL _UxGT(" voorverwarmen");
     LSTR MSG_PREHEAT_1_H                  = PREHEAT_1_LABEL _UxGT(" voorverw. ~");
     LSTR MSG_PREHEAT_1_END                = PREHEAT_1_LABEL _UxGT(" voorverw. Einde");
diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h
index 2dde747378..9105f58bdb 100644
--- a/Marlin/src/lcd/language/language_pl.h
+++ b/Marlin/src/lcd/language/language_pl.h
@@ -83,7 +83,7 @@ namespace Language_pl {
   LSTR MSG_SET_ORIGIN                     = _UxGT("Ustaw punkt zero");
   LSTR MSG_SELECT_ORIGIN                  = _UxGT("Wybierz punkt zero");
   LSTR MSG_LAST_VALUE_SP                  = _UxGT("Poprzednia wartość ");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Rozgrzej ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Rozgrzej ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Rozgrzej ") PREHEAT_1_LABEL _UxGT(" Dysza");
diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h
index 13f62f693b..524c2c97d8 100644
--- a/Marlin/src/lcd/language/language_pt.h
+++ b/Marlin/src/lcd/language/language_pt.h
@@ -53,7 +53,7 @@ namespace Language_pt {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Definir desvio");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Offsets aplicados");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Definir origem");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Pre-aquecer ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Pre-aquecer ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Pre-aquecer ") PREHEAT_1_LABEL _UxGT(" Bico");
diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h
index 7d97d48336..c66f717f9d 100644
--- a/Marlin/src/lcd/language/language_pt_br.h
+++ b/Marlin/src/lcd/language/language_pt_br.h
@@ -68,7 +68,7 @@ namespace Language_pt_br {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Compensar origem");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Alteração aplicada");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Ajustar Origem");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Pre-aquecer ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Pre-aquecer ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Extrusora ") PREHEAT_1_LABEL;
@@ -133,7 +133,7 @@ namespace Language_pt_br {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Fim da Edição");
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Montar Malha Custom");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Montar ");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Montar $");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Checar $");
   #endif
diff --git a/Marlin/src/lcd/language/language_ro.h b/Marlin/src/lcd/language/language_ro.h
index 2eb4c0b996..fee63dc2ad 100644
--- a/Marlin/src/lcd/language/language_ro.h
+++ b/Marlin/src/lcd/language/language_ro.h
@@ -69,7 +69,7 @@ namespace Language_ro {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Seteaza Offseturile Acasa");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Offseturi Aplicate");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Seteaza Originea");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Preincalzeste ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Preincalzeste ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Preincalzeste ") PREHEAT_1_LABEL _UxGT(" Capatul");
@@ -143,7 +143,7 @@ namespace Language_ro {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Done Editing Mesh");
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Build Custom Mesh");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Build Mesh");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Build Mesh ($)");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Validate Mesh ($)");
   #endif
diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h
index 2de45e7d8d..e33018b034 100644
--- a/Marlin/src/lcd/language/language_ru.h
+++ b/Marlin/src/lcd/language/language_ru.h
@@ -106,7 +106,7 @@ namespace Language_ru {
   #else
     LSTR MSG_LAST_VALUE_SP                  = _UxGT("Послед. знач. ");
   #endif
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                      = _UxGT("Преднагрев ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                    = _UxGT("Нагрев ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                  = _UxGT("Нагрев ") PREHEAT_1_LABEL _UxGT(" сопло");
diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h
index 81fb9a3d01..76e7f7fbd7 100644
--- a/Marlin/src/lcd/language/language_sk.h
+++ b/Marlin/src/lcd/language/language_sk.h
@@ -107,7 +107,7 @@ namespace Language_sk {
   LSTR MSG_TRAMMING_WIZARD                = _UxGT("Spriev. vyrovn.");
   LSTR MSG_SELECT_ORIGIN                  = _UxGT("Vyberte začiatok");
   LSTR MSG_LAST_VALUE_SP                  = _UxGT("Posl. hodnota ");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Zahriať ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Zahriať ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Zahriať ") PREHEAT_1_LABEL _UxGT(" hotend");
diff --git a/Marlin/src/lcd/language/language_sv.h b/Marlin/src/lcd/language/language_sv.h
index 3b4d6c24c1..cdb902aef0 100644
--- a/Marlin/src/lcd/language/language_sv.h
+++ b/Marlin/src/lcd/language/language_sv.h
@@ -78,7 +78,7 @@ namespace Language_sv {
   LSTR MSG_SELECT_ORIGIN                  = _UxGT("Välj Origo");
   LSTR MSG_LAST_VALUE_SP                  = _UxGT("Senaste värde ");
 
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Förvärmning ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Förvärmning ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Förvärmning ") PREHEAT_1_LABEL _UxGT(" Stoppa");
diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h
index d6f2f52a0c..4c2bbfa0dc 100644
--- a/Marlin/src/lcd/language/language_tr.h
+++ b/Marlin/src/lcd/language/language_tr.h
@@ -73,7 +73,7 @@ namespace Language_tr {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Ofset Ayarla");
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Ofset Tamam");
   LSTR MSG_SET_ORIGIN                     = _UxGT("Sıfır Belirle");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Ön Isınma ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Ön Isınma ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                = _UxGT("Ön Isınma ") PREHEAT_1_LABEL _UxGT(" Nozul");
@@ -146,7 +146,7 @@ namespace Language_tr {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Mesh Düzenleme Tamam");
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Özel Mesh Oluştur");
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Mesh Oluştur");
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Mesh Oluştur ($)");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Doğrulama Mesh ($)");
   #endif
diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h
index 581a501b49..afba537008 100644
--- a/Marlin/src/lcd/language/language_uk.h
+++ b/Marlin/src/lcd/language/language_uk.h
@@ -108,7 +108,7 @@ namespace Language_uk {
   #else
     LSTR MSG_LAST_VALUE_SP                  = _UxGT("Останнє знач. ");
   #endif
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                      = _UxGT("Нагрів ") PREHEAT_1_LABEL;
     LSTR MSG_PREHEAT_1_H                    = _UxGT("Нагрів ") PREHEAT_1_LABEL " ~";
     LSTR MSG_PREHEAT_1_END                  = _UxGT("Нагрів ") PREHEAT_1_LABEL _UxGT(" сопло");
diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h
index 9a4ef464b5..ae0babbf8b 100644
--- a/Marlin/src/lcd/language/language_vi.h
+++ b/Marlin/src/lcd/language/language_vi.h
@@ -64,7 +64,7 @@ namespace Language_vi {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("Đặt bù đắp nhà");                       // Set home offsets
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("Bù đắp được áp dụng");                  // Offsets applied
   LSTR MSG_SET_ORIGIN                     = _UxGT("Đặt nguồn gốc");                        // Set origin
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" trước");      // Preheat
     LSTR MSG_PREHEAT_1_H                  = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" trước ~");    // Preheat
     LSTR MSG_PREHEAT_1_END                = _UxGT("Làm nóng ") PREHEAT_1_LABEL _UxGT(" Đầu");
@@ -126,7 +126,7 @@ namespace Language_vi {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("Chỉnh sửa xong lưới");                  // Done Editing Mesh
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("Xây dựng lưới tự chọn");                // Build Custom Mesh
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("Xây dựng lưới");                        // Build Mesh
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("Xây dựng lưới ($)");
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("Thẩm tra lưới ($)");
   #endif
diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h
index afa51689cf..d61634e431 100644
--- a/Marlin/src/lcd/language/language_zh_CN.h
+++ b/Marlin/src/lcd/language/language_zh_CN.h
@@ -68,7 +68,7 @@ namespace Language_zh_CN {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("设置原点偏移");     // "Set home offsets"
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("偏移已启用");     // "Offsets applied"
   LSTR MSG_SET_ORIGIN                     = _UxGT("设置原点");     // "Set origin"
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("预热 ") PREHEAT_1_LABEL;     // "Preheat PREHEAT_2_LABEL"
     LSTR MSG_PREHEAT_1_H                  = _UxGT("预热 ") PREHEAT_1_LABEL " ~";     // "Preheat PREHEAT_2_LABEL"
     LSTR MSG_PREHEAT_1_END                = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴");     //MSG_PREHEAT_1 " "
@@ -142,7 +142,7 @@ namespace Language_zh_CN {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("完成编辑网格");     // "Done Editing Mesh"
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("创设客户网格");     // "Build Custom Mesh"
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("创设网格");     // "Build Mesh"
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("创设 $ 网格");     // "Build PREHEAT_1_LABEL Mesh"
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("批准 $ 网格");     // "Validate PREHEAT_1_LABEL Mesh"
   #endif
diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h
index 01b11225e3..7680721b00 100644
--- a/Marlin/src/lcd/language/language_zh_TW.h
+++ b/Marlin/src/lcd/language/language_zh_TW.h
@@ -66,7 +66,7 @@ namespace Language_zh_TW {
   LSTR MSG_SET_HOME_OFFSETS               = _UxGT("設置原點偏移");     // "Set home offsets"
   LSTR MSG_HOME_OFFSETS_APPLIED           = _UxGT("偏移已啟用");     // "Offsets applied"
   LSTR MSG_SET_ORIGIN                     = _UxGT("設置原點");     // "Set origin"
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_PREHEAT_1                    = _UxGT("預熱 ") PREHEAT_1_LABEL;     // "Preheat PREHEAT_1_LABEL"
     LSTR MSG_PREHEAT_1_H                  = _UxGT("預熱 ") PREHEAT_1_LABEL " ~";     // "Preheat PREHEAT_1_LABEL"
     LSTR MSG_PREHEAT_1_END                = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴");     //MSG_PREHEAT_1 " "
@@ -139,7 +139,7 @@ namespace Language_zh_TW {
   LSTR MSG_UBL_DONE_EDITING_MESH          = _UxGT("完成編輯網格");     // "Done Editing Mesh"
   LSTR MSG_UBL_BUILD_CUSTOM_MESH          = _UxGT("創設客戶網格");     // "Build Custom Mesh"
   LSTR MSG_UBL_BUILD_MESH_MENU            = _UxGT("創設網格");     // "Build Mesh"
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LSTR MSG_UBL_BUILD_MESH_M             = _UxGT("創設 $ 網格");     // "Build PREHEAT_1_LABEL Mesh"
     LSTR MSG_UBL_VALIDATE_MESH_M          = _UxGT("批准 $ 網格");     // "Validate PREHEAT_1_LABEL Mesh"
   #endif
diff --git a/Marlin/src/lcd/marlinui.cpp b/Marlin/src/lcd/marlinui.cpp
index ae169cdab6..2757e6d47a 100644
--- a/Marlin/src/lcd/marlinui.cpp
+++ b/Marlin/src/lcd/marlinui.cpp
@@ -134,7 +134,7 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
   }
 #endif
 
-#if PREHEAT_COUNT
+#if HAS_PREHEAT
   preheat_t MarlinUI::material_preset[PREHEAT_COUNT];  // Initialized by settings.load()
   PGM_P MarlinUI::get_preheat_label(const uint8_t m) {
     #define _PDEF(N) static PGMSTR(preheat_##N##_label, PREHEAT_##N##_LABEL);
diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h
index 883850d6e0..63e1eb5b0d 100644
--- a/Marlin/src/lcd/marlinui.h
+++ b/Marlin/src/lcd/marlinui.h
@@ -116,7 +116,7 @@
   };
 #endif
 
-#if PREHEAT_COUNT
+#if HAS_PREHEAT
   typedef struct {
     #if HAS_HOTEND
       celsius_t hotend_temp;
@@ -497,7 +497,7 @@ public:
     static const char * scrolled_filename(CardReader &theCard, const uint8_t maxlen, uint8_t hash, const bool doScroll);
   #endif
 
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     static preheat_t material_preset[PREHEAT_COUNT];
     static PGM_P get_preheat_label(const uint8_t m);
   #endif
diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp
index 0e11cd211a..9e1f455a64 100644
--- a/Marlin/src/lcd/menu/menu_configuration.cpp
+++ b/Marlin/src/lcd/menu/menu_configuration.cpp
@@ -310,7 +310,7 @@ void menu_advanced_settings();
 
 #endif
 
-#if PREHEAT_COUNT && DISABLED(SLIM_LCD_MENUS)
+#if HAS_PREHEAT && DISABLED(SLIM_LCD_MENUS)
 
   void _menu_configuration_preheat_settings() {
     #define _MINTEMP_ITEM(N) HEATER_##N##_MINTEMP,
@@ -547,7 +547,7 @@ void menu_configuration() {
   #endif
 
   // Preheat configurations
-  #if PREHEAT_COUNT && DISABLED(SLIM_LCD_MENUS)
+  #if HAS_PREHEAT && DISABLED(SLIM_LCD_MENUS)
     LOOP_L_N(m, PREHEAT_COUNT)
       SUBMENU_N_S(m, ui.get_preheat_label(m), MSG_PREHEAT_M_SETTINGS, _menu_configuration_preheat_settings);
   #endif
diff --git a/Marlin/src/lcd/menu/menu_filament.cpp b/Marlin/src/lcd/menu/menu_filament.cpp
index 7d0d2dc72c..e7365744e9 100644
--- a/Marlin/src/lcd/menu/menu_filament.cpp
+++ b/Marlin/src/lcd/menu/menu_filament.cpp
@@ -90,7 +90,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
   START_MENU();
   if (LCD_HEIGHT >= 4) STATIC_ITEM_P(change_filament_header(mode), SS_DEFAULT|SS_INVERT);
   BACK_ITEM(MSG_BACK);
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     LOOP_L_N(m, PREHEAT_COUNT)
       ACTION_ITEM_N_S(m, ui.get_preheat_label(m), MSG_PREHEAT_M, _change_filament_with_preset);
   #endif
diff --git a/Marlin/src/lcd/menu/menu_temperature.cpp b/Marlin/src/lcd/menu/menu_temperature.cpp
index 3abb2e9c20..5524793b19 100644
--- a/Marlin/src/lcd/menu/menu_temperature.cpp
+++ b/Marlin/src/lcd/menu/menu_temperature.cpp
@@ -69,7 +69,7 @@ void Temperature::lcd_preheat(const uint8_t e, const int8_t indh, const int8_t i
   ui.return_to_status();
 }
 
-#if PREHEAT_COUNT
+#if HAS_PREHEAT
 
   #if HAS_TEMP_HOTEND
     inline void _preheat_end(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, -1); }
@@ -138,7 +138,7 @@ void Temperature::lcd_preheat(const uint8_t e, const int8_t indh, const int8_t i
 
   #endif // HAS_MULTI_HOTEND || HAS_HEATED_BED
 
-#endif // PREHEAT_COUNT
+#endif // HAS_PREHEAT
 
 #if HAS_TEMP_HOTEND || HAS_HEATED_BED
 
@@ -263,7 +263,7 @@ void menu_temperature() {
 
   #endif // HAS_FAN
 
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     //
     // Preheat for all Materials
     //
diff --git a/Marlin/src/lcd/menu/menu_ubl.cpp b/Marlin/src/lcd/menu/menu_ubl.cpp
index 8dea7d943d..a08eceed77 100644
--- a/Marlin/src/lcd/menu/menu_ubl.cpp
+++ b/Marlin/src/lcd/menu/menu_ubl.cpp
@@ -208,7 +208,7 @@ void _lcd_ubl_edit_mesh() {
   void _lcd_ubl_validate_mesh() {
     START_MENU();
     BACK_ITEM(MSG_UBL_TOOLS);
-    #if PREHEAT_COUNT
+    #if HAS_PREHEAT
       #if HAS_HEATED_BED
         #define VALIDATE_MESH_GCODE_ITEM(M) \
           GCODES_ITEM_N_S(M, ui.get_preheat_label(M), MSG_UBL_VALIDATE_MESH_M, PSTR("G28\nG26CPI" STRINGIFY(M)))
@@ -230,7 +230,7 @@ void _lcd_ubl_edit_mesh() {
           #endif
         #endif
       #endif
-    #endif // PREHEAT_COUNT
+    #endif // HAS_PREHEAT
     ACTION_ITEM(MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh);
     ACTION_ITEM(MSG_INFO_SCREEN, ui.return_to_status);
     END_MENU();
@@ -324,7 +324,7 @@ void _lcd_ubl_invalidate() {
 void _lcd_ubl_build_mesh() {
   START_MENU();
   BACK_ITEM(MSG_UBL_TOOLS);
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     #if HAS_HEATED_BED
       #define PREHEAT_BED_GCODE(M) "M190I" STRINGIFY(M) "\n"
     #else
@@ -352,7 +352,7 @@ void _lcd_ubl_build_mesh() {
         #endif
       #endif
     #endif
-  #endif // PREHEAT_COUNT
+  #endif // HAS_PREHEAT
 
   SUBMENU(MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_custom_mesh);
   GCODES_ITEM(MSG_UBL_BUILD_COLD_MESH, PSTR("G29NP1"));
diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
index 6b7143e82a..c82f5aad0d 100644
--- a/Marlin/src/module/settings.cpp
+++ b/Marlin/src/module/settings.cpp
@@ -317,7 +317,7 @@ typedef struct SettingsDataStruct {
   //
   // Material Presets
   //
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     preheat_t ui_material_preset[PREHEAT_COUNT];        // M145 S0 H B F
   #endif
 
@@ -918,7 +918,7 @@ void MarlinSettings::postprocess() {
     //
     // LCD Preheat settings
     //
-    #if PREHEAT_COUNT
+    #if HAS_PREHEAT
       _FIELD_TEST(ui_material_preset);
       EEPROM_WRITE(ui.material_preset);
     #endif
@@ -1786,7 +1786,7 @@ void MarlinSettings::postprocess() {
       //
       // LCD Preheat settings
       //
-      #if PREHEAT_COUNT
+      #if HAS_PREHEAT
         _FIELD_TEST(ui_material_preset);
         EEPROM_READ(ui.material_preset);
       #endif
@@ -2796,7 +2796,7 @@ void MarlinSettings::reset() {
   //
   // Preheat parameters
   //
-  #if PREHEAT_COUNT
+  #if HAS_PREHEAT
     #define _PITEM(N,T) PREHEAT_##N##_##T,
     #if HAS_HOTEND
       constexpr uint16_t hpre[] = { REPEAT2_S(1, INCREMENT(PREHEAT_COUNT), _PITEM, TEMP_HOTEND) };
@@ -3181,7 +3181,7 @@ void MarlinSettings::reset() {
     //
     // LCD Preheat Settings
     //
-    #if PREHEAT_COUNT
+    #if HAS_PREHEAT
       gcode.M145_report(forReplay);
     #endif