✨ MKS TinyBee board support (#23340)
Co-Authored-By: Sola <42537573+solawc@users.noreply.github.com>
This commit is contained in:
Sola
GitHub
parent
80a537cd13
commit
21cd715506
|
|
@ -433,6 +433,7 @@
|
|||
#define BOARD_FYSETC_E4 6005 // FYSETC E4
|
||||
#define BOARD_PANDA_ZHU 6006 // Panda_ZHU
|
||||
#define BOARD_PANDA_M4 6007 // Panda_M4
|
||||
#define BOARD_MKS_TINYBEE 6008 // MKS TinyBee based on ESP32 (with I2S stepper stream)
|
||||
|
||||
//
|
||||
// SAMD51 ARM Cortex M4
|
||||
|
|
|
|||
207
Marlin/src/pins/esp32/pins_MKS_TINYBEE.h
Normal file
207
Marlin/src/pins/esp32/pins_MKS_TINYBEE.h
Normal file
|
|
@ -0,0 +1,207 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* MRR ESPE pin assignments
|
||||
* MRR ESPE is a 3D printer control board based on the ESP32 microcontroller.
|
||||
* Supports 5 stepper drivers (using I2S stepper stream), heated bed,
|
||||
* single hotend, and LCD controller.
|
||||
*/
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#if EXTRUDERS > 2 || E_STEPPERS > 2
|
||||
#error "MKS ESP Nano only supports two E Steppers. Comment out this line to continue."
|
||||
#elif HOTENDS > 2
|
||||
#error "MKS ESP Nano only supports two hotend / E-stepper. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "MKS TinyBee"
|
||||
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks"
|
||||
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 2
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN 33
|
||||
#define Y_STOP_PIN 32
|
||||
#define Z_STOP_PIN 22
|
||||
//#define FIL_RUNOUT_PIN 35
|
||||
|
||||
//
|
||||
// Enable I2S stepper stream
|
||||
//
|
||||
#define I2S_STEPPER_STREAM
|
||||
#if ENABLED(I2S_STEPPER_STREAM)
|
||||
#define I2S_WS 26
|
||||
#define I2S_BCK 25
|
||||
#define I2S_DATA 27
|
||||
#if ENABLED(LIN_ADVANCE)
|
||||
#error "I2S stream is currently incompatible with LIN_ADVANCE."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 129
|
||||
#define X_DIR_PIN 130
|
||||
#define X_ENABLE_PIN 128
|
||||
|
||||
#define Y_STEP_PIN 132
|
||||
#define Y_DIR_PIN 133
|
||||
#define Y_ENABLE_PIN 131
|
||||
|
||||
#define Z_STEP_PIN 135
|
||||
#define Z_DIR_PIN 136
|
||||
#define Z_ENABLE_PIN 134
|
||||
|
||||
#define E0_STEP_PIN 138
|
||||
#define E0_DIR_PIN 139
|
||||
#define E0_ENABLE_PIN 137
|
||||
|
||||
#define E1_STEP_PIN 141
|
||||
#define E1_DIR_PIN 142
|
||||
#define E1_ENABLE_PIN 140
|
||||
|
||||
#define Z2_STEP_PIN 141
|
||||
#define Z2_DIR_PIN 142
|
||||
#define Z2_ENABLE_PIN 140
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 36 // Analog Input
|
||||
#define TEMP_1_PIN 34 // Analog Input, you need set R6=0Ω and R7=NC
|
||||
#define TEMP_BED_PIN 39 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 145
|
||||
#define HEATER_1_PIN 146
|
||||
#define FAN_PIN 147
|
||||
#define FAN1_PIN 148
|
||||
#define HEATER_BED_PIN 144
|
||||
|
||||
//#define CONTROLLER_FAN_PIN 148
|
||||
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
|
||||
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
|
||||
|
||||
//
|
||||
// MicroSD card
|
||||
//
|
||||
#define SD_MOSI_PIN 23
|
||||
#define SD_MISO_PIN 19
|
||||
#define SD_SCK_PIN 18
|
||||
#define SDSS 5
|
||||
#define SD_DETECT_PIN 34 // IO34 default is SD_DET signal(Jump to SDDET)
|
||||
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
|
||||
|
||||
/**
|
||||
* ------ ------
|
||||
* (BEEPER) 149 |10 9 | 13 (BTN_ENC) (SPI MISO) 19 |10 9 | 18 (SPI SCK)
|
||||
* (LCD_EN) 21 | 8 7 | 4 (LCD_RS) (BTN_EN1) 14 | 8 7 | 5 (SPI CS)
|
||||
* (LCD_D4) 0 | 6 5 16 (LCD_D5) (BTN_EN2) 12 | 6 5 23 (SPI MOSI)
|
||||
* (LCD_D6) 15 | 4 3 | 17 (LCD_D7) (SPI_DET) 34 | 4 3 | RESET
|
||||
* GND | 2 1 | 5V GND | 2 1 | 3.3V
|
||||
* ------ ------
|
||||
* EXP1 EXP2
|
||||
*/
|
||||
|
||||
#define EXP1_03_PIN 17
|
||||
#define EXP1_04_PIN 15
|
||||
#define EXP1_05_PIN 16
|
||||
#define EXP1_06_PIN 0
|
||||
#define EXP1_07_PIN 4
|
||||
#define EXP1_08_PIN 21
|
||||
#define EXP1_09_PIN 13
|
||||
#define EXP1_10_PIN 149
|
||||
|
||||
#define EXP2_03_PIN -1 // RESET
|
||||
#define EXP2_04_PIN 34
|
||||
#define EXP2_05_PIN 23
|
||||
#define EXP2_06_PIN 12
|
||||
#define EXP2_07_PIN 5
|
||||
#define EXP2_08_PIN 14
|
||||
#define EXP2_09_PIN 18
|
||||
#define EXP2_10_PIN 19
|
||||
|
||||
#if HAS_WIRED_LCD
|
||||
|
||||
#define BEEPER_PIN 149
|
||||
#define BTN_ENC 13
|
||||
#define LCD_PINS_ENABLE 21
|
||||
#define LCD_PINS_RS 4
|
||||
#define BTN_EN1 14
|
||||
#define BTN_EN2 12
|
||||
#define LCD_BACKLIGHT_PIN -1
|
||||
|
||||
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
||||
#if ENABLED(MKS_MINI_12864)
|
||||
|
||||
//#define LCD_BACKLIGHT_PIN -1
|
||||
//#define LCD_RESET_PIN -1
|
||||
#define DOGLCD_A0 15
|
||||
#define DOGLCD_CS 16
|
||||
//#define DOGLCD_SCK 19
|
||||
//#define DOGLCD_MOSI 23
|
||||
|
||||
// Required for MKS_MINI_12864 with this board
|
||||
//#define MKS_LCD12864B
|
||||
|
||||
#elif ENABLED(MKS_MINI_12864_V3)
|
||||
|
||||
#define DOGLCD_CS EXP1_08_PIN
|
||||
#define DOGLCD_A0 EXP1_07_PIN
|
||||
#define LCD_PINS_DC DOGLCD_A0
|
||||
#define LCD_BACKLIGHT_PIN -1
|
||||
#define LCD_RESET_PIN EXP1_06_PIN
|
||||
#define NEOPIXEL_PIN EXP1_05_PIN
|
||||
#define DOGLCD_MOSI EXP2_05_PIN
|
||||
#define DOGLCD_SCK EXP2_09_PIN
|
||||
#if SD_CONNECTION_IS(ONBOARD)
|
||||
#define FORCE_SOFT_SPI
|
||||
#endif
|
||||
|
||||
#else // !MKS_MINI_12864
|
||||
|
||||
#define LCD_PINS_D4 0
|
||||
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||
#define LCD_PINS_D5 16
|
||||
#define LCD_PINS_D6 15
|
||||
#define LCD_PINS_D7 17
|
||||
#endif
|
||||
|
||||
#define BOARD_ST7920_DELAY_1 96
|
||||
#define BOARD_ST7920_DELAY_2 48
|
||||
#define BOARD_ST7920_DELAY_3 600
|
||||
|
||||
#endif // !MKS_MINI_12864
|
||||
|
||||
#endif // HAS_WIRED_LCD
|
||||
|
|
@ -711,6 +711,8 @@
|
|||
#include "esp32/pins_PANDA_ZHU.h" // ESP32 env:PANDA
|
||||
#elif MB(PANDA_M4)
|
||||
#include "esp32/pins_PANDA_M4.h" // ESP32 env:PANDA
|
||||
#elif MB(MKS_TINYBEE)
|
||||
#include "esp32/pins_MKS_TINYBEE.h" // ESP32 env:mks_tinybee
|
||||
|
||||
//
|
||||
// Adafruit Grand Central M4 (SAMD51 ARM Cortex-M4)
|
||||
|
|
|
|||
|
|
@ -37,3 +37,8 @@ lib_deps = ${common.lib_deps}
|
|||
board_build.partitions = Marlin/src/HAL/ESP32/esp32.csv
|
||||
upload_speed = 115200
|
||||
monitor_speed = 115200
|
||||
|
||||
[env:mks_tinybee]
|
||||
extends = env:esp32
|
||||
platform = espressif32@2.1.0
|
||||
board_build.partitions = default_8MB.csv
|
||||
|
|
|
|||
Loading…
Reference in a new issue