🔧 LEVEL_BED_CORNERS => LCD_BED_TRAMMING
This commit is contained in:
Scott Lahteine
parent
bcd9bb9628
commit
2b3ba02f09
|
|
@ -1806,18 +1806,18 @@
|
|||
#endif
|
||||
|
||||
// Add a menu item to move between bed corners for manual bed adjustment
|
||||
//#define LEVEL_BED_CORNERS
|
||||
//#define LCD_BED_TRAMMING
|
||||
|
||||
#if ENABLED(LEVEL_BED_CORNERS)
|
||||
#define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
|
||||
#define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
|
||||
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
|
||||
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
|
||||
//#define LEVEL_CORNERS_USE_PROBE
|
||||
#if ENABLED(LEVEL_CORNERS_USE_PROBE)
|
||||
#define LEVEL_CORNERS_PROBE_TOLERANCE 0.1
|
||||
#define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify
|
||||
//#define LEVEL_CORNERS_AUDIO_FEEDBACK
|
||||
#if ENABLED(LCD_BED_TRAMMING)
|
||||
#define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
|
||||
#define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
|
||||
#define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
|
||||
//#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
|
||||
//#define BED_TRAMMING_USE_PROBE
|
||||
#if ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
#define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm)
|
||||
#define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify
|
||||
//#define BED_TRAMMING_AUDIO_FEEDBACK
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -1837,7 +1837,7 @@
|
|||
* | 1 2 | | 1 4 | | 1 2 | | 2 |
|
||||
* LF --------- RF LF --------- RF LF --------- RF LF --------- RF
|
||||
*/
|
||||
#define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB }
|
||||
#define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB }
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -266,7 +266,7 @@
|
|||
* No adjustable bed on non-cartesians
|
||||
*/
|
||||
#if IS_KINEMATIC
|
||||
#undef LEVEL_BED_CORNERS
|
||||
#undef LCD_BED_TRAMMING
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -371,7 +371,7 @@
|
|||
#elif defined(FILAMENT_CHANGE_LOAD_LENGTH)
|
||||
#error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH."
|
||||
#elif defined(LEVEL_CORNERS_INSET)
|
||||
#error "LEVEL_CORNERS_INSET is now LEVEL_CORNERS_INSET_LFRB."
|
||||
#error "LEVEL_CORNERS_INSET is now BED_TRAMMING_INSET_LFRB."
|
||||
#elif defined(BEZIER_JERK_CONTROL)
|
||||
#error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION."
|
||||
#elif HAS_JUNCTION_DEVIATION && defined(JUNCTION_DEVIATION_FACTOR)
|
||||
|
|
@ -627,6 +627,12 @@
|
|||
#error "Y_DUAL_STEPPER_DRIVERS is no longer needed and should be removed."
|
||||
#elif defined(NUM_Z_STEPPER_DRIVERS)
|
||||
#error "NUM_Z_STEPPER_DRIVERS is no longer needed and should be removed."
|
||||
#elif defined(LEVEL_BED_CORNERS)
|
||||
#error "LEVEL_BED_CORNERS is now LCD_BED_TRAMMING."
|
||||
#elif defined(LEVEL_CORNERS_INSET_LFRB) || defined(LEVEL_CORNERS_HEIGHT) || defined(LEVEL_CORNERS_Z_HOP) || defined(LEVEL_CORNERS_USE_PROBE) || defined(LEVEL_CORNERS_PROBE_TOLERANCE) || defined(LEVEL_CORNERS_VERIFY_RAISED) || defined(LEVEL_CORNERS_AUDIO_FEEDBACK)
|
||||
#error "LEVEL_CORNERS_* settings have been renamed BED_TRAMMING_*."
|
||||
#elif defined(LEVEL_CENTER_TOO)
|
||||
#error "LEVEL_CENTER_TOO is now BED_TRAMMING_INCLUDE_CENTER."
|
||||
#endif
|
||||
|
||||
constexpr float arm[] = AXIS_RELATIVE_MODES;
|
||||
|
|
@ -1824,14 +1830,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
|
||||
#endif
|
||||
|
||||
#if ENABLED(LEVEL_BED_CORNERS)
|
||||
#ifndef LEVEL_CORNERS_INSET_LFRB
|
||||
#error "LEVEL_BED_CORNERS requires LEVEL_CORNERS_INSET_LFRB values."
|
||||
#elif ENABLED(LEVEL_CORNERS_USE_PROBE)
|
||||
#if ENABLED(LCD_BED_TRAMMING)
|
||||
#ifndef BED_TRAMMING_INSET_LFRB
|
||||
#error "LCD_BED_TRAMMING requires BED_TRAMMING_INSET_LFRB values."
|
||||
#elif ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
#if !HAS_BED_PROBE
|
||||
#error "LEVEL_CORNERS_USE_PROBE requires a real probe."
|
||||
#error "BED_TRAMMING_USE_PROBE requires a real probe."
|
||||
#elif ENABLED(SENSORLESS_PROBING)
|
||||
#error "LEVEL_CORNERS_USE_PROBE is incompatible with SENSORLESS_PROBING."
|
||||
#error "BED_TRAMMING_USE_PROBE is incompatible with SENSORLESS_PROBING."
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -2952,8 +2958,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
#error "DWIN_CREALITY_LCD does not support PID_EDIT_MENU or PID_AUTOTUNE_MENU."
|
||||
#elif EITHER(MPC_EDIT_MENU, MPC_AUTOTUNE_MENU)
|
||||
#error "DWIN_CREALITY_LCD does not support MPC_EDIT_MENU or MPC_AUTOTUNE_MENU."
|
||||
#elif ENABLED(LEVEL_BED_CORNERS)
|
||||
#error "DWIN_CREALITY_LCD does not support LEVEL_BED_CORNERS."
|
||||
#elif ENABLED(LCD_BED_TRAMMING)
|
||||
#error "DWIN_CREALITY_LCD does not support LCD_BED_TRAMMING."
|
||||
#elif BOTH(LCD_BED_LEVELING, PROBE_MANUALLY)
|
||||
#error "DWIN_CREALITY_LCD does not support LCD_BED_LEVELING with PROBE_MANUALLY."
|
||||
#endif
|
||||
|
|
@ -2964,8 +2970,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
#error "DWIN_LCD_PROUI does not support PID_EDIT_MENU or PID_AUTOTUNE_MENU."
|
||||
#elif EITHER(MPC_EDIT_MENU, MPC_AUTOTUNE_MENU)
|
||||
#error "DWIN_LCD_PROUI does not support MPC_EDIT_MENU or MPC_AUTOTUNE_MENU."
|
||||
#elif ENABLED(LEVEL_BED_CORNERS)
|
||||
#error "DWIN_LCD_PROUI does not support LEVEL_BED_CORNERS."
|
||||
#elif ENABLED(LCD_BED_TRAMMING)
|
||||
#error "DWIN_LCD_PROUI does not support LCD_BED_TRAMMING."
|
||||
#elif BOTH(LCD_BED_LEVELING, PROBE_MANUALLY)
|
||||
#error "DWIN_LCD_PROUI does not support LCD_BED_LEVELING with PROBE_MANUALLY."
|
||||
#endif
|
||||
|
|
@ -4121,8 +4127,8 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive.");
|
|||
#error "DGUS_LCD_UI_RELOADED requires a bed probe."
|
||||
#elif !HAS_MESH
|
||||
#error "DGUS_LCD_UI_RELOADED requires mesh leveling."
|
||||
#elif DISABLED(LEVEL_BED_CORNERS)
|
||||
#error "DGUS_LCD_UI_RELOADED requires LEVEL_BED_CORNERS."
|
||||
#elif DISABLED(LCD_BED_TRAMMING)
|
||||
#error "DGUS_LCD_UI_RELOADED requires LCD_BED_TRAMMING."
|
||||
#elif DISABLED(BABYSTEP_ALWAYS_AVAILABLE)
|
||||
#error "DGUS_LCD_UI_RELOADED requires BABYSTEP_ALWAYS_AVAILABLE."
|
||||
#elif DISABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
|
|
|
|||
|
|
@ -466,7 +466,7 @@ void DGUSRxHandler::MoveToPoint(DGUS_VP &vp, void *data_ptr) {
|
|||
}
|
||||
|
||||
const uint8_t point = ((uint8_t*)data_ptr)[1];
|
||||
constexpr float lfrb[4] = LEVEL_CORNERS_INSET_LFRB;
|
||||
constexpr float lfrb[4] = BED_TRAMMING_INSET_LFRB;
|
||||
float x, y;
|
||||
|
||||
switch (point) {
|
||||
|
|
@ -493,12 +493,12 @@ void DGUSRxHandler::MoveToPoint(DGUS_VP &vp, void *data_ptr) {
|
|||
break;
|
||||
}
|
||||
|
||||
if (ExtUI::getAxisPosition_mm(ExtUI::Z) < Z_MIN_POS + LEVEL_CORNERS_Z_HOP) {
|
||||
ExtUI::setAxisPosition_mm(Z_MIN_POS + LEVEL_CORNERS_Z_HOP, ExtUI::Z);
|
||||
if (ExtUI::getAxisPosition_mm(ExtUI::Z) < Z_MIN_POS + BED_TRAMMING_Z_HOP) {
|
||||
ExtUI::setAxisPosition_mm(Z_MIN_POS + BED_TRAMMING_Z_HOP, ExtUI::Z);
|
||||
}
|
||||
ExtUI::setAxisPosition_mm(x, ExtUI::X);
|
||||
ExtUI::setAxisPosition_mm(y, ExtUI::Y);
|
||||
ExtUI::setAxisPosition_mm(Z_MIN_POS + LEVEL_CORNERS_HEIGHT, ExtUI::Z);
|
||||
ExtUI::setAxisPosition_mm(Z_MIN_POS + BED_TRAMMING_HEIGHT, ExtUI::Z);
|
||||
}
|
||||
|
||||
void DGUSRxHandler::Probe(DGUS_VP &vp, void *data_ptr) {
|
||||
|
|
|
|||
|
|
@ -71,15 +71,15 @@ static_assert((DGUS_LEVEL_GRID_SIZE == GRID_MAX_POINTS_X * GRID_MAX_POINTS_Y), "
|
|||
#define DGUS_DEFAULT_FILAMENT_LEN 10
|
||||
#endif
|
||||
|
||||
#ifndef LEVEL_CORNERS_Z_HOP
|
||||
#define LEVEL_CORNERS_Z_HOP 4.0
|
||||
#ifndef BED_TRAMMING_Z_HOP
|
||||
#define BED_TRAMMING_Z_HOP 4.0
|
||||
#endif
|
||||
|
||||
#ifndef LEVEL_CORNERS_HEIGHT
|
||||
#define LEVEL_CORNERS_HEIGHT 0.0
|
||||
#ifndef BED_TRAMMING_HEIGHT
|
||||
#define BED_TRAMMING_HEIGHT 0.0
|
||||
#endif
|
||||
|
||||
static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration.");
|
||||
static_assert(BED_TRAMMING_Z_HOP >= 0, "BED_TRAMMING_Z_HOP must be >= 0. Please update your configuration.");
|
||||
|
||||
#ifndef DGUS_LEVEL_CENTER_X
|
||||
#define DGUS_LEVEL_CENTER_X ((X_BED_SIZE) / 2)
|
||||
|
|
|
|||
|
|
@ -47,7 +47,7 @@
|
|||
///////////// Global Variables /////////////
|
||||
////////////////////////////////////////////
|
||||
|
||||
#if HAS_LEVELING && ANY(LEVEL_BED_CORNERS, PROBE_OFFSET_WIZARD, X_AXIS_TWIST_COMPENSATION)
|
||||
#if HAS_LEVELING && ANY(LCD_BED_TRAMMING, PROBE_OFFSET_WIZARD, X_AXIS_TWIST_COMPENSATION)
|
||||
bool leveling_was_active; // = false
|
||||
#endif
|
||||
#if ANY(PROBE_MANUALLY, MESH_BED_LEVELING, X_AXIS_TWIST_COMPENSATION)
|
||||
|
|
|
|||
|
|
@ -211,7 +211,7 @@ void menu_move();
|
|||
void lcd_move_z();
|
||||
void _lcd_draw_homing();
|
||||
|
||||
#define HAS_LINE_TO_Z ANY(DELTA, PROBE_MANUALLY, MESH_BED_LEVELING, LEVEL_BED_CORNERS)
|
||||
#define HAS_LINE_TO_Z ANY(DELTA, PROBE_MANUALLY, MESH_BED_LEVELING, LCD_BED_TRAMMING)
|
||||
|
||||
#if HAS_LINE_TO_Z
|
||||
void line_to_z(const_float_t z);
|
||||
|
|
@ -258,7 +258,7 @@ inline void clear_menu_history() { screen_history_depth = 0; }
|
|||
|
||||
#define STICKY_SCREEN(S) []{ ui.defer_status_screen(); ui.goto_screen(S); }
|
||||
|
||||
#if HAS_LEVELING && ANY(LEVEL_BED_CORNERS, PROBE_OFFSET_WIZARD, X_AXIS_TWIST_COMPENSATION)
|
||||
#if HAS_LEVELING && ANY(LCD_BED_TRAMMING, PROBE_OFFSET_WIZARD, X_AXIS_TWIST_COMPENSATION)
|
||||
extern bool leveling_was_active;
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -26,7 +26,7 @@
|
|||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if BOTH(HAS_MARLINUI_MENU, LEVEL_BED_CORNERS)
|
||||
#if BOTH(HAS_MARLINUI_MENU, LCD_BED_TRAMMING)
|
||||
|
||||
#include "menu_item.h"
|
||||
#include "../../module/motion.h"
|
||||
|
|
@ -36,21 +36,21 @@
|
|||
#include "../../feature/bedlevel/bedlevel.h"
|
||||
#endif
|
||||
|
||||
#ifndef LEVEL_CORNERS_Z_HOP
|
||||
#define LEVEL_CORNERS_Z_HOP 4.0
|
||||
#ifndef BED_TRAMMING_Z_HOP
|
||||
#define BED_TRAMMING_Z_HOP 4.0
|
||||
#endif
|
||||
#ifndef LEVEL_CORNERS_HEIGHT
|
||||
#define LEVEL_CORNERS_HEIGHT 0.0
|
||||
#ifndef BED_TRAMMING_HEIGHT
|
||||
#define BED_TRAMMING_HEIGHT 0.0
|
||||
#endif
|
||||
|
||||
#if ENABLED(LEVEL_CORNERS_USE_PROBE)
|
||||
#if ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
#include "../../module/probe.h"
|
||||
#include "../../module/endstops.h"
|
||||
#if ENABLED(BLTOUCH)
|
||||
#include "../../feature/bltouch.h"
|
||||
#endif
|
||||
#ifndef LEVEL_CORNERS_PROBE_TOLERANCE
|
||||
#define LEVEL_CORNERS_PROBE_TOLERANCE 0.2
|
||||
#ifndef BED_TRAMMING_PROBE_TOLERANCE
|
||||
#define BED_TRAMMING_PROBE_TOLERANCE 0.2
|
||||
#endif
|
||||
float last_z;
|
||||
int good_points;
|
||||
|
|
@ -64,32 +64,32 @@
|
|||
|
||||
#endif
|
||||
|
||||
static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration.");
|
||||
static_assert(BED_TRAMMING_Z_HOP >= 0, "BED_TRAMMING_Z_HOP must be >= 0. Please update your configuration.");
|
||||
|
||||
#ifndef LEVEL_CORNERS_LEVELING_ORDER
|
||||
#define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, LB, RB } // Default
|
||||
//#define LEVEL_CORNERS_LEVELING_ORDER { LF, LB, RF } // 3 hard-coded points
|
||||
//#define LEVEL_CORNERS_LEVELING_ORDER { LF, RF } // 3-Point tramming - Rear
|
||||
//#define LEVEL_CORNERS_LEVELING_ORDER { LF, LB } // 3-Point tramming - Right
|
||||
//#define LEVEL_CORNERS_LEVELING_ORDER { RF, RB } // 3-Point tramming - Left
|
||||
//#define LEVEL_CORNERS_LEVELING_ORDER { LB, RB } // 3-Point tramming - Front
|
||||
#ifndef BED_TRAMMING_LEVELING_ORDER
|
||||
#define BED_TRAMMING_LEVELING_ORDER { LF, RF, LB, RB } // Default
|
||||
//#define BED_TRAMMING_LEVELING_ORDER { LF, LB, RF } // 3 hard-coded points
|
||||
//#define BED_TRAMMING_LEVELING_ORDER { LF, RF } // 3-Point tramming - Rear
|
||||
//#define BED_TRAMMING_LEVELING_ORDER { LF, LB } // 3-Point tramming - Right
|
||||
//#define BED_TRAMMING_LEVELING_ORDER { RF, RB } // 3-Point tramming - Left
|
||||
//#define BED_TRAMMING_LEVELING_ORDER { LB, RB } // 3-Point tramming - Front
|
||||
#endif
|
||||
|
||||
#define LF 1
|
||||
#define RF 2
|
||||
#define RB 3
|
||||
#define LB 4
|
||||
constexpr int lco[] = LEVEL_CORNERS_LEVELING_ORDER;
|
||||
constexpr int lco[] = BED_TRAMMING_LEVELING_ORDER;
|
||||
constexpr bool level_corners_3_points = COUNT(lco) == 2;
|
||||
static_assert(level_corners_3_points || COUNT(lco) == 4, "LEVEL_CORNERS_LEVELING_ORDER must have exactly 2 or 4 corners.");
|
||||
static_assert(level_corners_3_points || COUNT(lco) == 4, "BED_TRAMMING_LEVELING_ORDER must have exactly 2 or 4 corners.");
|
||||
|
||||
constexpr int lcodiff = ABS(lco[0] - lco[1]);
|
||||
static_assert(COUNT(lco) == 4 || lcodiff == 1 || lcodiff == 3, "The first two LEVEL_CORNERS_LEVELING_ORDER corners must be on the same edge.");
|
||||
static_assert(COUNT(lco) == 4 || lcodiff == 1 || lcodiff == 3, "The first two BED_TRAMMING_LEVELING_ORDER corners must be on the same edge.");
|
||||
|
||||
constexpr int nr_edge_points = level_corners_3_points ? 3 : 4;
|
||||
constexpr int available_points = nr_edge_points + ENABLED(LEVEL_CENTER_TOO);
|
||||
constexpr int center_index = TERN(LEVEL_CENTER_TOO, available_points - 1, -1);
|
||||
constexpr float inset_lfrb[4] = LEVEL_CORNERS_INSET_LFRB;
|
||||
constexpr int available_points = nr_edge_points + ENABLED(BED_TRAMMING_INCLUDE_CENTER);
|
||||
constexpr int center_index = TERN(BED_TRAMMING_INCLUDE_CENTER, available_points - 1, -1);
|
||||
constexpr float inset_lfrb[4] = BED_TRAMMING_INSET_LFRB;
|
||||
constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] },
|
||||
rb { (X_MAX_BED) - inset_lfrb[2], (Y_MAX_BED) - inset_lfrb[3] };
|
||||
|
||||
|
|
@ -120,12 +120,12 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
if ((lco[0] == LF && lco[1] == LB) || (lco[0] == LB && lco[1] == LF)) current_position.x = rb.x; // Center Right
|
||||
if ((lco[0] == RF && lco[1] == RB) || (lco[0] == RB && lco[1] == RF)) current_position.x = lf.x; // Left Center
|
||||
if ((lco[0] == LF && lco[1] == RF) || (lco[0] == RF && lco[1] == LF)) current_position.y = rb.y; // Center Back
|
||||
#if DISABLED(LEVEL_CENTER_TOO) && ENABLED(LEVEL_CORNERS_USE_PROBE)
|
||||
#if DISABLED(BED_TRAMMING_INCLUDE_CENTER) && ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
bed_corner++; // Must increment the count to ensure it resets the loop if the 3rd point is out of tolerance
|
||||
#endif
|
||||
break;
|
||||
|
||||
#if ENABLED(LEVEL_CENTER_TOO)
|
||||
#if ENABLED(BED_TRAMMING_INCLUDE_CENTER)
|
||||
case 3:
|
||||
current_position.set(X_CENTER, Y_CENTER);
|
||||
break;
|
||||
|
|
@ -134,9 +134,9 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
}
|
||||
else {
|
||||
// Four-Corner Bed Tramming with optional center
|
||||
if (TERN0(LEVEL_CENTER_TOO, bed_corner == center_index)) {
|
||||
if (TERN0(BED_TRAMMING_INCLUDE_CENTER, bed_corner == center_index)) {
|
||||
current_position.set(X_CENTER, Y_CENTER);
|
||||
TERN_(LEVEL_CORNERS_USE_PROBE, good_points--); // Decrement to allow one additional probe point
|
||||
TERN_(BED_TRAMMING_USE_PROBE, good_points--); // Decrement to allow one additional probe point
|
||||
}
|
||||
else {
|
||||
current_position = lf; // Left front
|
||||
|
|
@ -152,10 +152,10 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
/**
|
||||
* Level corners, starting in the front-left corner.
|
||||
*/
|
||||
#if ENABLED(LEVEL_CORNERS_USE_PROBE)
|
||||
#if ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
|
||||
#define VALIDATE_POINT(X, Y, STR) static_assert(Probe::build_time::can_reach((X), (Y)), \
|
||||
"LEVEL_CORNERS_INSET_LFRB " STR " inset is not reachable with the default NOZZLE_TO_PROBE offset and PROBING_MARGIN.")
|
||||
"BED_TRAMMING_INSET_LFRB " STR " inset is not reachable with the default NOZZLE_TO_PROBE offset and PROBING_MARGIN.")
|
||||
VALIDATE_POINT(lf.x, Y_CENTER, "left"); VALIDATE_POINT(X_CENTER, lf.y, "front");
|
||||
VALIDATE_POINT(rb.x, Y_CENTER, "right"); VALIDATE_POINT(X_CENTER, rb.y, "back");
|
||||
|
||||
|
|
@ -216,16 +216,16 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
}
|
||||
|
||||
bool _lcd_level_bed_corners_probe(bool verify=false) {
|
||||
if (verify) do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP); // do clearance if needed
|
||||
if (verify) do_blocking_move_to_z(current_position.z + BED_TRAMMING_Z_HOP); // do clearance if needed
|
||||
TERN_(BLTOUCH, if (!bltouch.high_speed_mode) bltouch.deploy()); // Deploy in LOW SPEED MODE on every probe action
|
||||
do_blocking_move_to_z(last_z - LEVEL_CORNERS_PROBE_TOLERANCE, MMM_TO_MMS(Z_PROBE_FEEDRATE_SLOW)); // Move down to lower tolerance
|
||||
do_blocking_move_to_z(last_z - BED_TRAMMING_PROBE_TOLERANCE, MMM_TO_MMS(Z_PROBE_FEEDRATE_SLOW)); // Move down to lower tolerance
|
||||
if (TEST(endstops.trigger_state(), Z_MIN_PROBE)) { // check if probe triggered
|
||||
endstops.hit_on_purpose();
|
||||
set_current_from_steppers_for_axis(Z_AXIS);
|
||||
sync_plan_position();
|
||||
TERN_(BLTOUCH, if (!bltouch.high_speed_mode) bltouch.stow()); // Stow in LOW SPEED MODE on every trigger
|
||||
// Triggered outside tolerance range?
|
||||
if (ABS(current_position.z - last_z) > LEVEL_CORNERS_PROBE_TOLERANCE) {
|
||||
if (ABS(current_position.z - last_z) > BED_TRAMMING_PROBE_TOLERANCE) {
|
||||
last_z = current_position.z; // Above tolerance. Set a new Z for subsequent corners.
|
||||
good_points = 0; // ...and start over
|
||||
}
|
||||
|
|
@ -245,7 +245,7 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
probe_triggered = PROBE_TRIGGERED();
|
||||
if (probe_triggered) {
|
||||
endstops.hit_on_purpose();
|
||||
TERN_(LEVEL_CORNERS_AUDIO_FEEDBACK, BUZZ(200, 600));
|
||||
TERN_(BED_TRAMMING_AUDIO_FEEDBACK, BUZZ(200, 600));
|
||||
}
|
||||
idle();
|
||||
}
|
||||
|
|
@ -255,8 +255,8 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
}
|
||||
|
||||
void _lcd_test_corners() {
|
||||
bed_corner = TERN(LEVEL_CENTER_TOO, center_index, 0);
|
||||
last_z = LEVEL_CORNERS_HEIGHT;
|
||||
bed_corner = TERN(BED_TRAMMING_INCLUDE_CENTER, center_index, 0);
|
||||
last_z = BED_TRAMMING_HEIGHT;
|
||||
endstops.enable_z_probe(true);
|
||||
good_points = 0;
|
||||
ui.goto_screen(_lcd_draw_probing);
|
||||
|
|
@ -264,7 +264,7 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
ui.refresh(LCDVIEW_REDRAW_NOW);
|
||||
_lcd_draw_probing(); // update screen with # of good points
|
||||
|
||||
do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP + TERN0(BLTOUCH, bltouch.z_extra_clearance())); // clearance
|
||||
do_blocking_move_to_z(current_position.z + BED_TRAMMING_Z_HOP + TERN0(BLTOUCH, bltouch.z_extra_clearance())); // clearance
|
||||
|
||||
_lcd_level_bed_corners_get_next_position(); // Select next corner coordinates
|
||||
current_position -= probe.offset_xy; // Account for probe offsets
|
||||
|
|
@ -273,7 +273,7 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
TERN_(BLTOUCH, if (bltouch.high_speed_mode) bltouch.deploy()); // Deploy in HIGH SPEED MODE
|
||||
if (!_lcd_level_bed_corners_probe()) { // Probe down to tolerance
|
||||
if (_lcd_level_bed_corners_raise()) { // Prompt user to raise bed if needed
|
||||
#if ENABLED(LEVEL_CORNERS_VERIFY_RAISED) // Verify
|
||||
#if ENABLED(BED_TRAMMING_VERIFY_RAISED) // Verify
|
||||
while (!_lcd_level_bed_corners_probe(true)) { // Loop while corner verified
|
||||
if (!_lcd_level_bed_corners_raise()) { // Prompt user to raise bed if needed
|
||||
if (corner_probing_done) return; // Done was selected
|
||||
|
|
@ -294,7 +294,7 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
#if ENABLED(BLTOUCH)
|
||||
if (bltouch.high_speed_mode) {
|
||||
// In HIGH SPEED MODE do clearance and stow at the very end
|
||||
do_blocking_move_to_z(current_position.z + LEVEL_CORNERS_Z_HOP);
|
||||
do_blocking_move_to_z(current_position.z + BED_TRAMMING_Z_HOP);
|
||||
bltouch.stow();
|
||||
}
|
||||
#endif
|
||||
|
|
@ -303,25 +303,25 @@ static void _lcd_level_bed_corners_get_next_position() {
|
|||
ui.set_selection(true);
|
||||
}
|
||||
|
||||
#else // !LEVEL_CORNERS_USE_PROBE
|
||||
#else // !BED_TRAMMING_USE_PROBE
|
||||
|
||||
static void _lcd_goto_next_corner() {
|
||||
line_to_z(LEVEL_CORNERS_Z_HOP);
|
||||
line_to_z(BED_TRAMMING_Z_HOP);
|
||||
|
||||
// Select next corner coordinates
|
||||
_lcd_level_bed_corners_get_next_position();
|
||||
|
||||
line_to_current_position(manual_feedrate_mm_s.x);
|
||||
line_to_z(LEVEL_CORNERS_HEIGHT);
|
||||
line_to_z(BED_TRAMMING_HEIGHT);
|
||||
if (++bed_corner >= available_points) bed_corner = 0;
|
||||
}
|
||||
|
||||
#endif // !LEVEL_CORNERS_USE_PROBE
|
||||
#endif // !BED_TRAMMING_USE_PROBE
|
||||
|
||||
static void _lcd_level_bed_corners_homing() {
|
||||
_lcd_draw_homing();
|
||||
if (!all_axes_homed()) return;
|
||||
#if ENABLED(LEVEL_CORNERS_USE_PROBE)
|
||||
#if ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
_lcd_test_corners();
|
||||
if (corner_probing_done) ui.goto_previous_screen_no_defer();
|
||||
TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
|
||||
|
|
@ -333,11 +333,11 @@ static void _lcd_level_bed_corners_homing() {
|
|||
GET_TEXT_F(MSG_BUTTON_NEXT), GET_TEXT_F(MSG_BUTTON_DONE)
|
||||
, _lcd_goto_next_corner
|
||||
, []{
|
||||
line_to_z(LEVEL_CORNERS_Z_HOP); // Raise Z off the bed when done
|
||||
line_to_z(BED_TRAMMING_Z_HOP); // Raise Z off the bed when done
|
||||
TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
|
||||
ui.goto_previous_screen_no_defer();
|
||||
}
|
||||
, GET_TEXT_F(TERN(LEVEL_CENTER_TOO, MSG_LEVEL_BED_NEXT_POINT, MSG_NEXT_CORNER))
|
||||
, GET_TEXT_F(TERN(BED_TRAMMING_INCLUDE_CENTER, MSG_LEVEL_BED_NEXT_POINT, MSG_NEXT_CORNER))
|
||||
, (const char*)nullptr, F("?")
|
||||
);
|
||||
});
|
||||
|
|
@ -362,4 +362,4 @@ void _lcd_level_bed_corners() {
|
|||
ui.goto_screen(_lcd_level_bed_corners_homing);
|
||||
}
|
||||
|
||||
#endif // HAS_MARLINUI_MENU && LEVEL_BED_CORNERS
|
||||
#endif // HAS_MARLINUI_MENU && LCD_BED_TRAMMING
|
||||
|
|
|
|||
|
|
@ -290,7 +290,7 @@ void menu_bed_leveling() {
|
|||
EDIT_ITEM(LCD_Z_OFFSET_TYPE, MSG_ZPROBE_ZOFFSET, &probe.offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
|
||||
#endif
|
||||
|
||||
#if ENABLED(LEVEL_BED_CORNERS)
|
||||
#if ENABLED(LCD_BED_TRAMMING)
|
||||
SUBMENU(MSG_BED_TRAMMING, _lcd_level_bed_corners);
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -466,7 +466,7 @@ class MenuItem_bool : public MenuEditItemBase {
|
|||
#define YESNO_ITEM_N_F(N,FLABEL, V...) CONFIRM_ITEM_N_F(N, FLABEL, MSG_YES, MSG_NO, ##V)
|
||||
#define YESNO_ITEM_N(N,LABEL, V...) YESNO_ITEM_N_F(N, GET_TEXT_F(LABEL), ##V)
|
||||
|
||||
#if ENABLED(LEVEL_BED_CORNERS)
|
||||
#if ENABLED(LCD_BED_TRAMMING)
|
||||
void _lcd_level_bed_corners();
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -491,7 +491,7 @@ void menu_motion() {
|
|||
|
||||
#endif
|
||||
|
||||
#if ENABLED(LEVEL_BED_CORNERS) && DISABLED(LCD_BED_LEVELING)
|
||||
#if ENABLED(LCD_BED_TRAMMING) && DISABLED(LCD_BED_LEVELING)
|
||||
SUBMENU(MSG_BED_TRAMMING, _lcd_level_bed_corners);
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@
|
|||
#if ENABLED(BACKLASH_GCODE)
|
||||
#define HAS_MENU_BACKLASH
|
||||
#endif
|
||||
#if ENABLED(LEVEL_BED_CORNERS)
|
||||
#if ENABLED(LCD_BED_TRAMMING)
|
||||
#define HAS_MENU_BED_CORNERS
|
||||
#endif
|
||||
#if ENABLED(CANCEL_OBJECTS)
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ restore_configs
|
|||
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT 3 \
|
||||
EXTRUDERS 8 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 TEMP_SENSOR_6 1 TEMP_SENSOR_7 1
|
||||
opt_enable SDSUPPORT USB_FLASH_DRIVE_SUPPORT USE_OTG_USB_HOST \
|
||||
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH LEVEL_BED_CORNERS LEVEL_CORNERS_USE_PROBE \
|
||||
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH LCD_BED_TRAMMING BED_TRAMMING_USE_PROBE \
|
||||
NEOPIXEL_LED Z_SAFE_HOMING FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
|
||||
# Not necessary to enable auto-fan for all extruders to hit problematic code paths
|
||||
opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_PIN PF13 \
|
||||
|
|
|
|||
|
|
@ -21,7 +21,7 @@ opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD \
|
|||
opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
|
||||
MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \
|
||||
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET LEVEL_CORNERS_USE_PROBE LEVEL_CORNERS_VERIFY_RAISED \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BED_TRAMMING_USE_PROBE BED_TRAMMING_VERIFY_RAISED \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
|
||||
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
|
||||
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_P
|
|||
BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
|
||||
NEOPIXEL_LED NEOPIXEL_PIN CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
|
||||
PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU LCD_SHOW_E_TOTAL \
|
||||
PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS LEVEL_CENTER_TOO \
|
||||
PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LCD_BED_TRAMMING BED_TRAMMING_INCLUDE_CENTER \
|
||||
NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
|
||||
ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \
|
||||
PASSWORD_FEATURE PASSWORD_ON_STARTUP PASSWORD_ON_SD_PRINT_MENU PASSWORD_AFTER_SD_PRINT_END PASSWORD_AFTER_SD_PRINT_ABORT \
|
||||
|
|
@ -51,13 +51,13 @@ opt_set MOTHERBOARD BOARD_RAMBO \
|
|||
DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
|
||||
MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
|
||||
AXIS_RELATIVE_MODES '{ false, false, false }' \
|
||||
LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }' \
|
||||
BED_TRAMMING_LEVELING_ORDER '{ LF, RF }' \
|
||||
X2_DRIVER_TYPE A4988 Y2_DRIVER_TYPE A4988
|
||||
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
|
||||
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \
|
||||
S_CURVE_ACCELERATION X_DUAL_ENDSTOPS Y_DUAL_ENDSTOPS \
|
||||
ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES \
|
||||
LEVEL_BED_CORNERS LEVEL_CENTER_TOO
|
||||
LCD_BED_TRAMMING BED_TRAMMING_INCLUDE_CENTER
|
||||
opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
|
||||
exec_test $1 $2 "Rambo CNC Configuration" "$3"
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue