diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index ce0bf408ff..b50d01f34d 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -39,55 +39,147 @@ #define MSG_SD_INSERTED _UxGT("SD-Karte erkannt") #define MSG_SD_REMOVED _UxGT("SD-Karte entfernt") #define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters +#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopp") #define MSG_MAIN _UxGT("Hauptmenü") +#define MSG_ADVANCED_SETTINGS _UxGT("Erw. Einstellungen") +#define MSG_CONFIGURATION _UxGT("Konfiguration") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84 #define MSG_DEBUG_MENU _UxGT("Debug Menü") #define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittsb. Test") -#define MSG_AUTO_HOME _UxGT("Home") // G28 +#define MSG_AUTO_HOME _UxGT("Home XYZ") // G28 #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") #define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriere Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home XYZ") -#define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start") +#define MSG_LEVEL_BED_WAITING _UxGT("Klick zum Starten") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate") -#define MSG_LEVEL_BED_DONE _UxGT("Fertig") +#define MSG_LEVEL_BED_DONE _UxGT("Nivellieren Fertig!") #define MSG_Z_FADE_HEIGHT _UxGT("Ausblendhöhe") #define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv") -#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp +#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp #define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA") #define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ") -#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle") +#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alles") #define MSG_PREHEAT_1_END _UxGT("Vorw. PLA Extr.") #define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett") #define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.") #define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS") #define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ") -#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle") +#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alles") #define MSG_PREHEAT_2_END _UxGT("Vorw. ABS Extr.") #define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett") #define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.") +#define MSG_PREHEAT_CUSTOM _UxGT("benutzerdef. Heizen") #define MSG_COOLDOWN _UxGT("Abkühlen") #define MSG_SWITCH_PS_ON _UxGT("Netzteil ein") #define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus") #define MSG_EXTRUDE _UxGT("Extrudieren") -#define MSG_RETRACT _UxGT("Retract") -#define MSG_MOVE_AXIS _UxGT("Bewegen") +#define MSG_RETRACT _UxGT("Rückzug") +#define MSG_MOVE_AXIS _UxGT("Achse Bewegen") #define MSG_BED_LEVELING _UxGT("Bett Nivellierung") #define MSG_LEVEL_BED _UxGT("Bett nivellieren") #define MSG_LEVEL_CORNERS _UxGT("Ecken nivellieren") #define MSG_NEXT_CORNER _UxGT("Nächste Ecke") #define MSG_EDITING_STOPPED _UxGT("Netzbearb. angeh.") #define MSG_USER_MENU _UxGT("Benutzer Menü") - +#define MSG_UBL_DOING_G29 _UxGT("G29 ausführen") +#define MSG_UBL_UNHOMED _UxGT("Home XYZ zuerst") +#define MSG_UBL_TOOLS _UxGT("UBL Werkzeuge") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_IDEX_MENU _UxGT("IDEX Modus") +#define MSG_IDEX_MODE_AUTOPARK _UxGT("Autom. Parken") +#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplizieren") +#define MSG_IDEX_MODE_SCALED_COPY _UxGT("Skalierung kopieren") +#define MSG_IDEX_MODE_FULL_CTRL _UxGT("vollstä. Kontrolle") +#define MSG_IDEX_X_OFFSET _UxGT("2. X Düse") +#define MSG_IDEX_Y_OFFSET _UxGT("2. Y Düse") +#define MSG_IDEX_Z_OFFSET _UxGT("2. Z Düse") +#define MSG_IDEX_SAVE_OFFSETS _UxGT("Versätze speichern") +#define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.") +#define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen") +#define MSG_UBL_BC_INSERT2 _UxGT("Messen") +#define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...") +#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren") +#define MSG_UBL_SET_BED_TEMP _UxGT("Betttemperatur") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp.") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netzhöhe einst.") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren") +#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.") +#define MSG_UBL_MESH_LEVELING _UxGT("Netz-Nivellierung") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt-Nivell.") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz-Nivell.") +#define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren") +#define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte") +#define MSG_UBL_MAP_TYPE _UxGT("Kartentyp") +#define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Externe Sicherung") +#define MSG_UBL_INFO_UBL _UxGT("UBL Info ausgeben") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Füllung") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Füllen") +#define MSG_UBL_SMART_FILLIN _UxGT("Intelligente Füllen") +#define MSG_UBL_FILLIN_MESH _UxGT("Netz Füllen") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinst. Alles") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz Speicherplatz") +#define MSG_UBL_STORAGE_SLOT _UxGT("Speicherort") +#define MSG_UBL_LOAD_MESH _UxGT("Bettnetz laden") +#define MSG_UBL_SAVE_MESH _UxGT("Bettnetz speichern") +#define MSG_MESH_LOADED _UxGT("Netz %i geladen") +#define MSG_MESH_SAVED _UxGT("Netz %i gespeichert") +#define MSG_NO_STORAGE _UxGT("Kein Speicher") +#define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern") +#define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL") +#define MSG_LED_CONTROL _UxGT("LED Steuerung") +#define MSG_LEDS _UxGT("Licht") +#define MSG_LED_PRESETS _UxGT("Licht Einstellungen") +#define MSG_SET_LEDS_RED _UxGT("Rot") +#define MSG_SET_LEDS_ORANGE _UxGT("Orange") +#define MSG_SET_LEDS_YELLOW _UxGT("Gelb") +#define MSG_SET_LEDS_GREEN _UxGT("Grün") +#define MSG_SET_LEDS_BLUE _UxGT("Blau") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Violett") +#define MSG_SET_LEDS_WHITE _UxGT("Weiß") +#define MSG_SET_LEDS_DEFAULT _UxGT("Standard") +#define MSG_CUSTOM_LEDS _UxGT("Benutzerdef.") +#define MSG_INTENSITY_R _UxGT("Intensität Rot") +#define MSG_INTENSITY_G _UxGT("Intensität Grün") +#define MSG_INTENSITY_B _UxGT("Intensität Blau") +#define MSG_INTENSITY_W _UxGT("Intensität Weiß") +#define MSG_LED_BRIGHTNESS _UxGT("Helligkeit") #define MSG_MOVING _UxGT("In Bewegung...") #define MSG_FREE_XY _UxGT("Abstand XY") -#define MSG_MOVE_X _UxGT("X") -#define MSG_MOVE_Y _UxGT("Y") -#define MSG_MOVE_Z _UxGT("Z") -#define MSG_MOVE_E _UxGT("Extruder ") +#define MSG_MOVE_X _UxGT("Bewege X") +#define MSG_MOVE_Y _UxGT("Bewege Y") +#define MSG_MOVE_Z _UxGT("Bewege Z") +#define MSG_MOVE_E _UxGT("Bewege Extruder") #define MSG_MOVE_01MM _UxGT(" 0,1 mm") #define MSG_MOVE_1MM _UxGT(" 1,0 mm") #define MSG_MOVE_10MM _UxGT("10,0 mm") @@ -110,7 +202,7 @@ #define MSG_PID_D _UxGT("PID D") #define MSG_PID_C _UxGT("PID C") #define MSG_SELECT _UxGT("Auswählen") -#define MSG_ACC _UxGT("A") +#define MSG_ACC _UxGT("Beschleunigung") #define MSG_JERK _UxGT("Jerk") #if IS_KINEMATIC #define MSG_VA_JERK _UxGT("V A Jerk") @@ -123,12 +215,12 @@ #endif #define MSG_VE_JERK _UxGT("V E Jerk") #define MSG_VELOCITY _UxGT("Geschwindigkeit") -#define MSG_VMAX _UxGT("V max ") // space by purpose +#define MSG_VMAX _UxGT("V max ") // space intentional #define MSG_VMIN _UxGT("V min") #define MSG_VTRAV_MIN _UxGT("V min Leerfahrt") #define MSG_ACCELERATION _UxGT("Beschleunigung") -#define MSG_AMAX _UxGT("A max ") // space by purpose -#define MSG_A_RETRACT _UxGT("A Retract") +#define MSG_AMAX _UxGT("A max ") // space intentional +#define MSG_A_RETRACT _UxGT("A Rückzug") #define MSG_A_TRAVEL _UxGT("A Leerfahrt") #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #if IS_KINEMATIC @@ -151,66 +243,75 @@ #define MSG_MOTION _UxGT("Bewegung") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") -#define MSG_FILAMENT_DIAM _UxGT("D Fil.") +#define MSG_FILAMENT_DIAM _UxGT("Durchm. Filament") #define MSG_FILAMENT_UNLOAD _UxGT("Entladen mm") #define MSG_FILAMENT_LOAD _UxGT("Laden mm") -#define MSG_ADVANCE_K _UxGT("Advance Faktor") +#define MSG_ADVANCE_K _UxGT("Vorschubfaktor") #define MSG_CONTRAST _UxGT("LCD Kontrast") #define MSG_STORE_EEPROM _UxGT("Konfig. speichern") #define MSG_LOAD_EEPROM _UxGT("Konfig. laden") #define MSG_RESTORE_FAILSAFE _UxGT("Standardwerte laden") #define MSG_INIT_EEPROM _UxGT("Werkseinstellungen") -#define MSG_SD_UPDATE _UxGT("SD Update") + +#define MSG_SD_UPDATE _UxGT("SD Firmware Update") #define MSG_RESET_PRINTER _UxGT("Drucker neustarten") + #define MSG_REFRESH _UxGT("Aktualisieren") #define MSG_WATCH _UxGT("Info") #define MSG_PREPARE _UxGT("Vorbereitung") #define MSG_TUNE _UxGT("Justierung") -#define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause") -#define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung") -#define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch") -#define MSG_CARD_MENU _UxGT("SD-Karte") +#define MSG_PAUSE_PRINT _UxGT("SD-Druck Pausieren") +#define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzen") +#define MSG_STOP_PRINT _UxGT("SD-Druck Abbrechen") +#define MSG_POWER_LOSS_RECOVERY _UxGT("Wiederh. n. Stroma.") +#define MSG_CARD_MENU _UxGT("Druck v. SD-Karte") #define MSG_NO_CARD _UxGT("Keine SD-Karte") #define MSG_DWELL _UxGT("Warten...") -#define MSG_USERWAIT _UxGT("Warte auf Nutzer") +#define MSG_USERWAIT _UxGT("Klick zum fortsetzen") #define MSG_PRINT_PAUSED _UxGT("Druck pausiert") +#define MSG_PRINTING _UxGT("Druckt...") #define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen") -#define MSG_NO_MOVE _UxGT("Motoren eingeschaltet") +#define MSG_NO_MOVE _UxGT("Motoren angeschaltet") #define MSG_KILLED _UxGT("ABGEBROCHEN") #define MSG_STOPPED _UxGT("ANGEHALTEN") -#define MSG_CONTROL_RETRACT _UxGT("Retract mm") -#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm") -#define MSG_CONTROL_RETRACTF _UxGT("Retract V") -#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm") +#define MSG_CONTROL_RETRACT _UxGT("Rückzug mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Rückzug mm") +#define MSG_CONTROL_RETRACTF _UxGT("Rückzug V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Sprung mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") -#define MSG_AUTORETRACT _UxGT("Autom. Retract") +#define MSG_AUTORETRACT _UxGT("Autom. Rückzug") +#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Rückzug Länge") +#define MSG_SINGLENOZZLE_TOOL_CHANGE _UxGT("Werkzeugwechsel") +#define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Prime Geschwin.") +#define MSG_SINGLENOZZLE_RETRACT_SPD _UxGT("Rückzug Geschwin.") #define MSG_FILAMENTCHANGE _UxGT("Filament wechseln") #define MSG_FILAMENTLOAD _UxGT("Filament laden") #define MSG_FILAMENTUNLOAD _UxGT("Filament entladen") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Alles entladen") #define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface #define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21" -#define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb") -#define MSG_SKEW_FACTOR _UxGT("Skew Faktor") +#define MSG_ZPROBE_OUT _UxGT("Z-Sonde ausserhalb") +#define MSG_SKEW_FACTOR _UxGT("Korrekturfaktor") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test") -#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") +#define MSG_BLTOUCH_RESET _UxGT("BLTouch zurücks.") #define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch ausfahren") #define MSG_BLTOUCH_STOW _UxGT("BLTouch einfahren") -#define MSG_MANUAL_DEPLOY _UxGT("Z-Sensor anbringen") -#define MSG_MANUAL_STOW _UxGT("Z-Sensor entfernen") +#define MSG_MANUAL_DEPLOY _UxGT("Z-Sonde ausfahren") +#define MSG_MANUAL_STOW _UxGT("Z-Sonde einfahren") #define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("homen") -#define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz") +#define MSG_ZPROBE_ZOFFSET _UxGT("Sondenversatz Z") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") -#define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.") -#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN") -#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG") +#define MSG_ENDSTOP_ABORT _UxGT("Endstopp Abbr.") +#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN ERFOLGLOS") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Bett heizen fehlge.") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMP-ABWEI.") #define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT") #define MSG_THERMAL_RUNAWAY_BED _UxGT("BETT") MSG_THERMAL_RUNAWAY #define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") @@ -219,12 +320,14 @@ #define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST #define MSG_HALTED _UxGT("DRUCKER STOPP") -#define MSG_PLEASE_RESET _UxGT("Bitte Resetten") +#define MSG_PLEASE_RESET _UxGT("Bitte neustarten") #define MSG_SHORT_DAY _UxGT("t") // One character only #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("Extr. heizt...") +#define MSG_COOLING _UxGT("Extr. kühlt...") #define MSG_BED_HEATING _UxGT("Bett heizt...") +#define MSG_BED_COOLING _UxGT("Bett kühlt...") #define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y") @@ -233,6 +336,7 @@ #define MSG_DELTA_SETTINGS _UxGT("Delta Einst. anzeig.") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen") +#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Sondenversatz Z") #define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod") #define MSG_DELTA_HEIGHT _UxGT("Höhe") #define MSG_DELTA_RADIUS _UxGT("Radius") @@ -252,98 +356,16 @@ #define MSG_CASE_LIGHT _UxGT("Beleuchtung") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit") -#define MSG_UBL_DOING_G29 _UxGT("G29 UBL läuft!") -#define MSG_UBL_UNHOMED _UxGT("Erst XYZ homen") -#define MSG_UBL_TOOLS _UxGT("UBL Werkzeuge") -#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") -#define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.") -#define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen") -#define MSG_UBL_BC_INSERT2 _UxGT("Messen") -#define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen") -#define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...") -#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren") -#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren") -#define MSG_UBL_SET_BED_TEMP _UxGT("Bett Temp.") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp.") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP -#define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten") -#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.") -#define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...") -#define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.") -#define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS") -#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt") -#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netz Höhe einst.") -#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe") -#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren") -#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.") -#define MSG_UBL_MESH_LEVELING _UxGT("Netz Nivellierung") -#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt Nivellierung") -#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz Nivell.") -#define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren") -#define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte") -#define MSG_UBL_MAP_TYPE _UxGT("Kartentyp") -#define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben") -#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host") -#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV") -#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Externe Sicherung") -#define MSG_UBL_INFO_UBL _UxGT("UBL Info ausgeben") -#define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten") -#define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Fill-in") -#define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Fill-in") -#define MSG_UBL_SMART_FILLIN _UxGT("Kluges Fill-in") -#define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Netz") -#define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren") -#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.") -#define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinstellung Alle") -#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.") -#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz Speicherplatz") -#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot") -#define MSG_UBL_LOAD_MESH _UxGT("Bett Netz laden") -#define MSG_UBL_SAVE_MESH _UxGT("Bett Netz speichern") -#define MSG_MESH_LOADED _UxGT("Netz %i geladen") -#define MSG_MESH_SAVED _UxGT("Netz %i gespeichert") -#define MSG_NO_STORAGE _UxGT("Kein Speicher") -#define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern") -#define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.") -#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten") -#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL") - -#define MSG_LED_CONTROL _UxGT("LED Kontrolle") -#define MSG_LEDS _UxGT("Licht") -#define MSG_LED_PRESETS _UxGT("Licht Einstellungen") -#define MSG_SET_LEDS_RED _UxGT("Rot") -#define MSG_SET_LEDS_ORANGE _UxGT("Orange") -#define MSG_SET_LEDS_YELLOW _UxGT("Gelb") -#define MSG_SET_LEDS_GREEN _UxGT("Grün") -#define MSG_SET_LEDS_BLUE _UxGT("Blau") -#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") -#define MSG_SET_LEDS_VIOLET _UxGT("Violett") -#define MSG_SET_LEDS_WHITE _UxGT("Weiß") -#define MSG_SET_LEDS_DEFAULT _UxGT("Standard") -#define MSG_CUSTOM_LEDS _UxGT("Benutzerdef.") -#define MSG_INTENSITY_R _UxGT("Intensität Rot") -#define MSG_INTENSITY_G _UxGT("Intensität Grün") -#define MSG_INTENSITY_B _UxGT("Intensität Blau") -#define MSG_INTENSITY_W _UxGT("Intensität Weiß") -#define MSG_LED_BRIGHTNESS _UxGT("Helligkeit") - #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke") #define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit") - #define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob") + #define MSG_INFO_PRINT_LONGEST _UxGT("Längste Druckzeit") #define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert") #else #define MSG_INFO_PRINT_COUNT _UxGT("Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett") - #define MSG_INFO_PRINT_TIME _UxGT("Gesamt ") + #define MSG_INFO_PRINT_TIME _UxGT("Gesamt") #define MSG_INFO_PRINT_LONGEST _UxGT("Längster") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.") #endif @@ -362,9 +384,11 @@ #define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Mehr entleeren") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ") +#define MSG_RUNOUT_SENSOR_ENABLE _UxGT("Auslaufsensor") #define MSG_ERR_HOMING_FAILED _UxGT("Homing gescheitert") #define MSG_ERR_PROBING_FAILED _UxGT("Probing gescheitert") #define MSG_M600_TOO_COLD _UxGT("M600: Zu kalt") + #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den") @@ -372,20 +396,20 @@ #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme") - #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments...") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filamentes...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen.") - #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf...") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Bitte warten...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des") - #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filamentes") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Entleeren des") - #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("Filaments") + #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("Filamentes") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes...") @@ -394,6 +418,7 @@ #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klick zum Heizen") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Entleeren...")