Changes for parity with 1.1.x
This commit is contained in:
Scott Lahteine
parent
6040d4080e
commit
2fde60da12
|
|
@ -64,7 +64,7 @@
|
|||
constexpr float unified_bed_leveling::_mesh_index_to_xpos[16],
|
||||
unified_bed_leveling::_mesh_index_to_ypos[16];
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
#if ENABLED(ULTIPANEL)
|
||||
bool unified_bed_leveling::lcd_map_control = false;
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -76,19 +76,23 @@ class unified_bed_leveling {
|
|||
static int g29_grid_size;
|
||||
#endif
|
||||
|
||||
static float measure_point_with_encoder();
|
||||
static float measure_business_card_thickness(float);
|
||||
#if ENABLED(NEWPANEL)
|
||||
static void move_z_with_encoder(const float &multiplier);
|
||||
static float measure_point_with_encoder();
|
||||
static float measure_business_card_thickness(const float&);
|
||||
static void manually_probe_remaining_mesh(const float&, const float&, const float&, const float&, const bool);
|
||||
static void fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map);
|
||||
#endif
|
||||
|
||||
static bool g29_parameter_parsing();
|
||||
static void find_mean_mesh_height();
|
||||
static void shift_mesh_height();
|
||||
static void probe_entire_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map, const bool stow_probe, bool do_furthest);
|
||||
static void manually_probe_remaining_mesh(const float&, const float&, const float&, const float&, const bool);
|
||||
static void tilt_mesh_based_on_3pts(const float &z1, const float &z2, const float &z3);
|
||||
static void tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map);
|
||||
static void g29_what_command();
|
||||
static void g29_eeprom_dump();
|
||||
static void g29_compare_current_mesh_to_stored_mesh();
|
||||
static void fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map);
|
||||
static bool smart_fill_one(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir);
|
||||
static void smart_fill_mesh();
|
||||
|
||||
|
|
@ -137,7 +141,7 @@ class unified_bed_leveling {
|
|||
MESH_MIN_Y + 14 * (MESH_Y_DIST), MESH_MIN_Y + 15 * (MESH_Y_DIST)
|
||||
};
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
#if ENABLED(ULTIPANEL)
|
||||
static bool lcd_map_control;
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -458,7 +458,7 @@
|
|||
parser.seen('T'), parser.seen('E'), parser.seen('U'));
|
||||
break;
|
||||
|
||||
#endif
|
||||
#endif // HAS_BED_PROBE
|
||||
|
||||
case 2: {
|
||||
#if ENABLED(NEWPANEL)
|
||||
|
|
@ -913,7 +913,7 @@
|
|||
|
||||
static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); }
|
||||
|
||||
float unified_bed_leveling::measure_business_card_thickness(const float in_height) {
|
||||
float unified_bed_leveling::measure_business_card_thickness(const float &in_height) {
|
||||
lcd_external_control = true;
|
||||
save_ubl_active_state_and_disable(); // Disable bed level correction for probing
|
||||
|
||||
|
|
@ -1033,7 +1033,6 @@
|
|||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
do_blocking_move_to(rx, ry, Z_CLEARANCE_DEPLOY_PROBE);
|
||||
}
|
||||
|
||||
#endif // NEWPANEL
|
||||
|
||||
bool unified_bed_leveling::g29_parameter_parsing() {
|
||||
|
|
@ -1078,11 +1077,11 @@
|
|||
#endif
|
||||
{
|
||||
g29_phase_value = pv;
|
||||
if (!WITHIN(g29_phase_value, 0, 6)) {
|
||||
SERIAL_PROTOCOLLNPGM("?(P)hase value invalid (0-6).\n");
|
||||
err_flag = true;
|
||||
}
|
||||
}
|
||||
if (!WITHIN(g29_phase_value, 0, 6)) {
|
||||
SERIAL_PROTOCOLLNPGM("?(P)hase value invalid (0-6).\n");
|
||||
err_flag = true;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (parser.seen('J')) {
|
||||
|
|
@ -1341,11 +1340,10 @@
|
|||
z_values[x][y] -= tmp_z_values[x][y];
|
||||
}
|
||||
|
||||
|
||||
mesh_index_pair unified_bed_leveling::find_furthest_invalid_mesh_point() {
|
||||
|
||||
bool found_a_NAN = false;
|
||||
bool found_a_real = false;
|
||||
bool found_a_NAN = false, found_a_real = false;
|
||||
|
||||
mesh_index_pair out_mesh;
|
||||
out_mesh.x_index = out_mesh.y_index = -1;
|
||||
out_mesh.distance = -99999.99;
|
||||
|
|
@ -1353,12 +1351,12 @@
|
|||
for (int8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
|
||||
for (int8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
|
||||
|
||||
if ( isnan(z_values[i][j])) { // Check to see if this location holds an invalid mesh point
|
||||
if (isnan(z_values[i][j])) { // Check to see if this location holds an invalid mesh point
|
||||
|
||||
const float mx = mesh_index_to_xpos(i),
|
||||
my = mesh_index_to_ypos(j);
|
||||
|
||||
if ( !position_is_reachable_by_probe(mx, my)) // make sure the probe can get to the mesh point
|
||||
if (!position_is_reachable_by_probe(mx, my)) // make sure the probe can get to the mesh point
|
||||
continue;
|
||||
|
||||
found_a_NAN = true;
|
||||
|
|
@ -1452,6 +1450,7 @@
|
|||
}
|
||||
} // for j
|
||||
} // for i
|
||||
|
||||
return out_mesh;
|
||||
}
|
||||
|
||||
|
|
@ -1499,15 +1498,8 @@
|
|||
if (!position_is_reachable(rawx, rawy)) // SHOULD NOT OCCUR because find_closest_mesh_point_of_type will only return reachable
|
||||
break;
|
||||
|
||||
float new_z = z_values[location.x_index][location.y_index];
|
||||
|
||||
if (isnan(new_z)) // if the mesh point is invalid, set it to 0.0 so it can be edited
|
||||
new_z = 0.0;
|
||||
|
||||
do_blocking_move_to(rawx, rawy, Z_CLEARANCE_BETWEEN_PROBES); // Move the nozzle to the edit point
|
||||
|
||||
new_z = FLOOR(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place
|
||||
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
lcd_external_control = true;
|
||||
|
||||
|
|
@ -1515,6 +1507,10 @@
|
|||
|
||||
lcd_refresh();
|
||||
|
||||
float new_z = z_values[location.x_index][location.y_index];
|
||||
if (isnan(new_z)) new_z = 0.0; // Set invalid mesh points to 0.0 so they can be edited
|
||||
new_z = FLOOR(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place
|
||||
|
||||
lcd_mesh_edit_setup(new_z);
|
||||
|
||||
do {
|
||||
|
|
|
|||
|
|
@ -53,6 +53,9 @@
|
|||
#error "SIZE_OF_CROSSHAIRS must be less than SIZE_OF_INTERSECTION_CIRCLES."
|
||||
#endif
|
||||
|
||||
#define G26_OK false
|
||||
#define G26_ERR true
|
||||
|
||||
/**
|
||||
* G26 Mesh Validation Tool
|
||||
*
|
||||
|
|
@ -268,9 +271,7 @@ void move_to(const float &rx, const float &ry, const float &z, const float &e_de
|
|||
set_destination_from_current();
|
||||
}
|
||||
|
||||
FORCE_INLINE void move_to(const float where[XYZE], const float &de) {
|
||||
move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], de);
|
||||
}
|
||||
FORCE_INLINE void move_to(const float where[XYZE], const float &de) { move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], de); }
|
||||
|
||||
void retract_filament(const float where[XYZE]) {
|
||||
if (!g26_retracted) { // Only retract if we are not already retracted!
|
||||
|
|
@ -314,9 +315,8 @@ void print_line_from_here_to_there(const float &sx, const float &sy, const float
|
|||
|
||||
// If the end point of the line is closer to the nozzle, flip the direction,
|
||||
// moving from the end to the start. On very small lines the optimization isn't worth it.
|
||||
if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length)) {
|
||||
if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length))
|
||||
return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz);
|
||||
}
|
||||
|
||||
// Decide whether to retract & bump
|
||||
|
||||
|
|
@ -373,7 +373,6 @@ inline bool look_for_lines_to_connect() {
|
|||
SERIAL_EOL();
|
||||
//debug_current_and_destination(PSTR("Connecting horizontal line."));
|
||||
}
|
||||
|
||||
print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height);
|
||||
}
|
||||
bitmap_set(horizontal_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if we skipped it
|
||||
|
|
@ -405,8 +404,8 @@ inline bool look_for_lines_to_connect() {
|
|||
SERIAL_ECHOPAIR(", ey=", ey);
|
||||
SERIAL_CHAR(')');
|
||||
SERIAL_EOL();
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
void debug_current_and_destination(const char *title);
|
||||
debug_current_and_destination(PSTR("Connecting vertical line."));
|
||||
#endif
|
||||
}
|
||||
|
|
@ -678,9 +677,8 @@ void GcodeSuite::G26() {
|
|||
return;
|
||||
}
|
||||
|
||||
g26_x_pos = parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position[X_AXIS],
|
||||
g26_x_pos = parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position[X_AXIS];
|
||||
g26_y_pos = parser.seenval('Y') ? RAW_Y_POSITION(parser.value_linear_units()) : current_position[Y_AXIS];
|
||||
|
||||
if (!position_is_reachable(g26_x_pos, g26_y_pos)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds.");
|
||||
return;
|
||||
|
|
@ -727,6 +725,7 @@ void GcodeSuite::G26() {
|
|||
#if ENABLED(ULTRA_LCD)
|
||||
lcd_external_control = true;
|
||||
#endif
|
||||
|
||||
//debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern."));
|
||||
|
||||
/**
|
||||
|
|
@ -806,7 +805,7 @@ void GcodeSuite::G26() {
|
|||
#if IS_KINEMATIC
|
||||
// Check to make sure this segment is entirely on the bed, skip if not.
|
||||
if (!position_is_reachable(rx, ry) || !position_is_reachable(xe, ye)) continue;
|
||||
#else // not, we need to skip
|
||||
#else // not, we need to skip
|
||||
rx = constrain(rx, X_MIN_POS + 1, X_MAX_POS - 1); // This keeps us from bumping the endstops
|
||||
ry = constrain(ry, Y_MIN_POS + 1, Y_MAX_POS - 1);
|
||||
xe = constrain(xe, X_MIN_POS + 1, X_MAX_POS - 1);
|
||||
|
|
@ -842,15 +841,15 @@ void GcodeSuite::G26() {
|
|||
move_to(destination, 0); // Raise the nozzle
|
||||
//debug_current_and_destination(PSTR("done doing Z-Raise."));
|
||||
|
||||
destination[X_AXIS] = g26_x_pos; // Move back to the starting position
|
||||
destination[X_AXIS] = g26_x_pos; // Move back to the starting position
|
||||
destination[Y_AXIS] = g26_y_pos;
|
||||
//destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; // Keep the nozzle where it is
|
||||
//destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; // Keep the nozzle where it is
|
||||
|
||||
move_to(destination, 0); // Move back to the starting position
|
||||
//debug_current_and_destination(PSTR("done doing X/Y move."));
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
lcd_external_control = false; // Give back control of the LCD Panel!
|
||||
lcd_external_control = false; // Give back control of the LCD Panel!
|
||||
#endif
|
||||
|
||||
if (!g26_keep_heaters_on) {
|
||||
|
|
|
|||
|
|
@ -313,11 +313,15 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
|||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#if DISABLED(SDSUPPORT)
|
||||
#error "LCD_PROGRESS_BAR requires SDSUPPORT."
|
||||
#elif DISABLED(ULTRA_LCD)
|
||||
#error "LCD_PROGRESS_BAR requires a character LCD."
|
||||
#elif ENABLED(DOGLCD)
|
||||
#error "LCD_PROGRESS_BAR does not apply to graphical displays."
|
||||
#elif ENABLED(FILAMENT_LCD_DISPLAY)
|
||||
#error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
|
||||
#endif
|
||||
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && DISABLED(DOGLCD)
|
||||
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR or Graphical LCD."
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -85,12 +85,13 @@ int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_spe
|
|||
#endif
|
||||
|
||||
uint8_t lcd_status_update_delay = 1, // First update one loop delayed
|
||||
lcd_status_message_level; // Higher level overrides lower
|
||||
lcd_status_message_level; // Higher level blocks lower level
|
||||
char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kana with up to 3*LCD_WIDTH+1
|
||||
|
||||
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
||||
uint8_t status_scroll_pos = 0;
|
||||
#endif
|
||||
|
||||
#if ENABLED(SCROLL_LONG_FILENAMES)
|
||||
uint8_t filename_scroll_pos, filename_scroll_max, filename_scroll_hash;
|
||||
#endif
|
||||
|
|
@ -163,8 +164,6 @@ uint16_t max_display_update_time = 0;
|
|||
extern bool powersupply_on;
|
||||
#endif
|
||||
|
||||
float move_menu_scale;
|
||||
|
||||
////////////////////////////////////////////
|
||||
///////////////// Menu Tree ////////////////
|
||||
////////////////////////////////////////////
|
||||
|
|
@ -244,7 +243,6 @@ uint16_t max_display_update_time = 0;
|
|||
void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live=false); \
|
||||
typedef void _name##_void
|
||||
|
||||
DECLARE_MENU_EDIT_TYPE(uint32_t, long5);
|
||||
DECLARE_MENU_EDIT_TYPE(int16_t, int3);
|
||||
DECLARE_MENU_EDIT_TYPE(uint8_t, int8);
|
||||
DECLARE_MENU_EDIT_TYPE(float, float3);
|
||||
|
|
@ -254,6 +252,7 @@ uint16_t max_display_update_time = 0;
|
|||
DECLARE_MENU_EDIT_TYPE(float, float51);
|
||||
DECLARE_MENU_EDIT_TYPE(float, float52);
|
||||
DECLARE_MENU_EDIT_TYPE(float, float62);
|
||||
DECLARE_MENU_EDIT_TYPE(uint32_t, long5);
|
||||
|
||||
void menu_action_setting_edit_bool(const char* pstr, bool* ptr);
|
||||
void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc);
|
||||
|
|
@ -566,10 +565,9 @@ uint16_t max_display_update_time = 0;
|
|||
static bool no_reentry = false;
|
||||
if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, sync_message);
|
||||
if (no_reentry) return;
|
||||
|
||||
// Make this the current handler till all moves are done
|
||||
no_reentry = true;
|
||||
screenFunc_t old_screen = currentScreen;
|
||||
const screenFunc_t old_screen = currentScreen;
|
||||
lcd_goto_screen(_lcd_synchronize);
|
||||
stepper.synchronize();
|
||||
no_reentry = false;
|
||||
|
|
@ -997,7 +995,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
#if ENABLED(SDSUPPORT)
|
||||
if (card.cardOK) {
|
||||
if (card.isFileOpen()) {
|
||||
if (IS_SD_PRINTING)
|
||||
if (card.sdprinting)
|
||||
MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause);
|
||||
else
|
||||
MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume);
|
||||
|
|
@ -1074,7 +1072,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
if (PAGE_CONTAINS(20, 20)) u8g.drawBitmapP(nozzle + 0, 20, 3, 1, offset_bedline_bmp);
|
||||
|
||||
// Draw cw/ccw indicator and up/down arrows.
|
||||
if (PAGE_CONTAINS(47,62)) {
|
||||
if (PAGE_CONTAINS(47, 62)) {
|
||||
u8g.drawBitmapP(left + 0, 47, 3, 16, rot_down);
|
||||
u8g.drawBitmapP(right + 0, 47, 3, 16, rot_up);
|
||||
u8g.drawBitmapP(right + 20, 48 - dir, 2, 13, up_arrow_bmp);
|
||||
|
|
@ -1115,6 +1113,8 @@ void kill_screen(const char* lcd_msg) {
|
|||
ENCODER_DIRECTION_NORMAL();
|
||||
if (encoderPosition) {
|
||||
const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR);
|
||||
encoderPosition = 0;
|
||||
|
||||
const float new_zoffset = zprobe_zoffset + planner.steps_to_mm[Z_AXIS] * babystep_increment;
|
||||
if (WITHIN(new_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) {
|
||||
|
||||
|
|
@ -1124,7 +1124,6 @@ void kill_screen(const char* lcd_msg) {
|
|||
zprobe_zoffset = new_zoffset;
|
||||
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
||||
}
|
||||
encoderPosition = 0;
|
||||
}
|
||||
if (lcdDrawUpdate) {
|
||||
lcd_implementation_drawedit(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_zoffset));
|
||||
|
|
@ -1164,11 +1163,12 @@ void kill_screen(const char* lcd_msg) {
|
|||
mesh_edit_value = float(rounded - (rounded % 5L)) / 1000.0;
|
||||
}
|
||||
|
||||
if (lcdDrawUpdate)
|
||||
if (lcdDrawUpdate) {
|
||||
lcd_implementation_drawedit(msg, ftostr43sign(mesh_edit_value));
|
||||
#if ENABLED(MESH_EDIT_GFX_OVERLAY)
|
||||
_lcd_zoffset_overlay_gfx(mesh_edit_value);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
void _lcd_mesh_edit_NOP() {
|
||||
|
|
@ -1182,7 +1182,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
return mesh_edit_value;
|
||||
}
|
||||
|
||||
void lcd_mesh_edit_setup(float initial) {
|
||||
void lcd_mesh_edit_setup(const float initial) {
|
||||
mesh_edit_value = mesh_edit_accumulator = initial;
|
||||
lcd_goto_screen(_lcd_mesh_edit_NOP);
|
||||
}
|
||||
|
|
@ -1203,6 +1203,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
|
||||
#endif // AUTO_BED_LEVELING_UBL
|
||||
|
||||
|
||||
/**
|
||||
* Watch temperature callbacks
|
||||
*/
|
||||
|
|
@ -2030,8 +2031,8 @@ void kill_screen(const char* lcd_msg) {
|
|||
*/
|
||||
void _lcd_ubl_adjust_height_cmd() {
|
||||
char UBL_LCD_GCODE[16];
|
||||
const int ind = ubl_height_amount < 0 ? 6 : 7;
|
||||
strcpy_P(UBL_LCD_GCODE, PSTR("G29 P6-"));
|
||||
const int ind = ubl_height_amount > 0 ? 9 : 10;
|
||||
strcpy_P(UBL_LCD_GCODE, PSTR("G29 P6 C -"));
|
||||
sprintf_P(&UBL_LCD_GCODE[ind], PSTR(".%i"), abs(ubl_height_amount));
|
||||
enqueue_and_echo_command(UBL_LCD_GCODE);
|
||||
}
|
||||
|
|
@ -2047,8 +2048,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
void _lcd_ubl_height_adjust_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_UBL_EDIT_MESH_MENU);
|
||||
MENU_ITEM_EDIT(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9);
|
||||
MENU_ITEM(function, MSG_UBL_MESH_HEIGHT_ADJUST, _lcd_ubl_adjust_height_cmd);
|
||||
MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9, _lcd_ubl_adjust_height_cmd);
|
||||
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
|
||||
END_MENU();
|
||||
}
|
||||
|
|
@ -2184,8 +2184,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
void _lcd_ubl_fillin_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_UBL_BUILD_MESH_MENU);
|
||||
MENU_ITEM_EDIT(int3, MSG_UBL_FILLIN_AMOUNT, &ubl_fillin_amount, 0, 9);
|
||||
MENU_ITEM(function, MSG_UBL_FILLIN_MESH, _lcd_ubl_fillin_amount_cmd);
|
||||
MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_FILLIN_AMOUNT, &ubl_fillin_amount, 0, 9, _lcd_ubl_fillin_amount_cmd);
|
||||
MENU_ITEM(function, MSG_UBL_SMART_FILLIN, _lcd_ubl_smart_fillin_cmd);
|
||||
MENU_ITEM(gcode, MSG_UBL_MANUAL_FILLIN, PSTR("G29 P2 B T0"));
|
||||
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
|
||||
|
|
@ -2644,6 +2643,8 @@ void kill_screen(const char* lcd_msg) {
|
|||
END_MENU();
|
||||
}
|
||||
|
||||
float move_menu_scale;
|
||||
|
||||
#if ENABLED(DELTA_CALIBRATION_MENU) || (ENABLED(DELTA_AUTO_CALIBRATION) && !HAS_BED_PROBE)
|
||||
|
||||
void lcd_move_z();
|
||||
|
|
@ -2653,13 +2654,11 @@ void kill_screen(const char* lcd_msg) {
|
|||
reset_bed_level(); // After calibration bed-level data is no longer valid
|
||||
#endif
|
||||
|
||||
float z_dest = (Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5;
|
||||
line_to_z(z_dest);
|
||||
line_to_z((Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5);
|
||||
current_position[X_AXIS] = rx;
|
||||
current_position[Y_AXIS] = ry;
|
||||
line_to_current_z();
|
||||
z_dest = Z_CLEARANCE_BETWEEN_PROBES;
|
||||
line_to_z(z_dest);
|
||||
line_to_z(Z_CLEARANCE_BETWEEN_PROBES);
|
||||
|
||||
lcd_synchronize();
|
||||
move_menu_scale = PROBE_MANUALLY_STEP;
|
||||
|
|
@ -2813,7 +2812,6 @@ void kill_screen(const char* lcd_msg) {
|
|||
#endif
|
||||
manual_move_e_index = eindex >= 0 ? eindex : active_extruder;
|
||||
#endif
|
||||
|
||||
manual_move_start_time = millis() + (move_menu_scale < 0.99 ? 0UL : 250UL); // delay for bigger moves
|
||||
manual_move_axis = (int8_t)axis;
|
||||
}
|
||||
|
|
@ -2830,6 +2828,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
if (encoderPosition && !processing_manual_move) {
|
||||
gcode.refresh_cmd_timeout();
|
||||
|
||||
// Start with no limits to movement
|
||||
float min = current_position[axis] - 1000,
|
||||
max = current_position[axis] + 1000;
|
||||
|
||||
|
|
@ -2867,7 +2866,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
// This assumes the center is 0,0
|
||||
#if ENABLED(DELTA)
|
||||
if (axis != Z_AXIS) {
|
||||
max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis]));
|
||||
max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis])); // (Y_AXIS - axis) == the other axis
|
||||
min = -max;
|
||||
}
|
||||
#endif
|
||||
|
|
@ -3131,7 +3130,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu);
|
||||
|
||||
#if HAS_LCD_CONTRAST
|
||||
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, (int16_t*)&lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
|
||||
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
|
||||
#endif
|
||||
#if ENABLED(FWRETRACT)
|
||||
MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
|
||||
|
|
@ -3724,7 +3723,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
|
||||
lcd_goto_screen(lcd_sdcard_menu, last_sdfile_encoderPosition);
|
||||
defer_return_to_status = true;
|
||||
last_sdfile_encoderPosition == 0xFFFF;
|
||||
last_sdfile_encoderPosition = 0xFFFF;
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
lcd_update();
|
||||
|
|
@ -3749,29 +3748,27 @@ void kill_screen(const char* lcd_msg) {
|
|||
MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
|
||||
}
|
||||
|
||||
if (fileCnt) {
|
||||
for (uint16_t i = 0; i < fileCnt; i++) {
|
||||
if (_menuLineNr == _thisItemNr) {
|
||||
const uint16_t nr =
|
||||
#if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA)
|
||||
fileCnt - 1 -
|
||||
#endif
|
||||
i;
|
||||
|
||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
||||
card.getfilename_sorted(nr);
|
||||
#else
|
||||
card.getfilename(nr);
|
||||
for (uint16_t i = 0; i < fileCnt; i++) {
|
||||
if (_menuLineNr == _thisItemNr) {
|
||||
const uint16_t nr =
|
||||
#if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA)
|
||||
fileCnt - 1 -
|
||||
#endif
|
||||
i;
|
||||
|
||||
if (card.filenameIsDir)
|
||||
MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
|
||||
else
|
||||
MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename);
|
||||
}
|
||||
else {
|
||||
MENU_ITEM_DUMMY();
|
||||
}
|
||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
||||
card.getfilename_sorted(nr);
|
||||
#else
|
||||
card.getfilename(nr);
|
||||
#endif
|
||||
|
||||
if (card.filenameIsDir)
|
||||
MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
|
||||
else
|
||||
MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename);
|
||||
}
|
||||
else {
|
||||
MENU_ITEM_DUMMY();
|
||||
}
|
||||
}
|
||||
END_MENU();
|
||||
|
|
@ -4476,13 +4473,14 @@ void lcd_init() {
|
|||
lcd_implementation_init();
|
||||
|
||||
#if ENABLED(NEWPANEL)
|
||||
|
||||
#if BUTTON_EXISTS(EN1)
|
||||
SET_INPUT_PULLUP(BTN_EN1);
|
||||
#endif
|
||||
|
||||
#if BUTTON_EXISTS(EN2)
|
||||
SET_INPUT_PULLUP(BTN_EN2);
|
||||
#endif
|
||||
|
||||
#if BUTTON_EXISTS(ENC)
|
||||
SET_INPUT_PULLUP(BTN_ENC);
|
||||
#endif
|
||||
|
|
@ -4684,7 +4682,7 @@ void lcd_update() {
|
|||
|
||||
#endif
|
||||
|
||||
bool encoderPastThreshold = (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP);
|
||||
const bool encoderPastThreshold = (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP);
|
||||
if (encoderPastThreshold || lcd_clicked) {
|
||||
if (encoderPastThreshold) {
|
||||
int32_t encoderMultiplier = 1;
|
||||
|
|
@ -4979,11 +4977,6 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
|
|||
if (BUTTON_PRESSED(ENC)) newbutton |= EN_C;
|
||||
#endif
|
||||
|
||||
buttons = newbutton;
|
||||
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
|
||||
buttons |= slow_buttons;
|
||||
#endif
|
||||
|
||||
//
|
||||
// Directional buttons
|
||||
//
|
||||
|
|
@ -5032,6 +5025,11 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
|
|||
|
||||
#endif // LCD_HAS_DIRECTIONAL_BUTTONS
|
||||
|
||||
buttons = newbutton;
|
||||
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
|
||||
buttons |= slow_buttons;
|
||||
#endif
|
||||
|
||||
#if ENABLED(ADC_KEYPAD)
|
||||
|
||||
uint8_t newbutton_reprapworld_keypad = 0;
|
||||
|
|
|
|||
|
|
@ -135,15 +135,20 @@ float Planner::min_feedrate_mm_s,
|
|||
Planner::inverse_z_fade_height,
|
||||
Planner::last_fade_z;
|
||||
#endif
|
||||
#else
|
||||
constexpr bool Planner::leveling_active;
|
||||
#endif
|
||||
|
||||
#if ENABLED(SKEW_CORRECTION)
|
||||
#if ENABLED(SKEW_CORRECTION_GCODE)
|
||||
// Initialized by settings.load()
|
||||
float Planner::xy_skew_factor;
|
||||
#if ENABLED(SKEW_CORRECTION_FOR_Z)
|
||||
float Planner::xz_skew_factor, Planner::yz_skew_factor;
|
||||
#endif
|
||||
#else
|
||||
constexpr float Planner::xy_skew_factor;
|
||||
#endif
|
||||
#if ENABLED(SKEW_CORRECTION_FOR_Z) && ENABLED(SKEW_CORRECTION_GCODE)
|
||||
float Planner::xz_skew_factor, Planner::yz_skew_factor;
|
||||
#else
|
||||
constexpr float Planner::xz_skew_factor, Planner::yz_skew_factor;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -97,18 +97,13 @@ uint8_t Stepper::last_direction_bits = 0; // The next stepping-bits to be
|
|||
int16_t Stepper::cleaning_buffer_counter = 0;
|
||||
|
||||
#if ENABLED(X_DUAL_ENDSTOPS)
|
||||
bool Stepper::locked_x_motor = false;
|
||||
bool Stepper::locked_x2_motor = false;
|
||||
bool Stepper::locked_x_motor = false, Stepper::locked_x2_motor = false;
|
||||
#endif
|
||||
|
||||
#if ENABLED(Y_DUAL_ENDSTOPS)
|
||||
bool Stepper::locked_y_motor = false;
|
||||
bool Stepper::locked_y2_motor = false;
|
||||
bool Stepper::locked_y_motor = false, Stepper::locked_y2_motor = false;
|
||||
#endif
|
||||
|
||||
#if ENABLED(Z_DUAL_ENDSTOPS)
|
||||
bool Stepper::locked_z_motor = false;
|
||||
bool Stepper::locked_z2_motor = false;
|
||||
bool Stepper::locked_z_motor = false, Stepper::locked_z2_motor = false;
|
||||
#endif
|
||||
|
||||
long Stepper::counter_X = 0,
|
||||
|
|
|
|||
Loading…
Reference in a new issue