From 37e669ce93f07f4e8f102af577655162ebfbdadb Mon Sep 17 00:00:00 2001 From: Thomas Lindner Date: Wed, 27 Mar 2024 21:22:48 +0100 Subject: [PATCH] adrians config (rebased) --- Marlin/Configuration.h | 205 ++++++++++++------ Marlin/Configuration_adv.h | 36 +-- Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 4 +- platformio.ini | 2 +- 4 files changed, 158 insertions(+), 89 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 49015aeec5..3a62d7af2a 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -61,14 +61,14 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(adrian, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) // @section machine // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_V1_4 #endif /** @@ -79,7 +79,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Serial Port Baud Rate @@ -92,8 +92,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 - +#define BAUDRATE 115200 //#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate /** @@ -116,7 +115,7 @@ //#define BLUETOOTH // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Adrian's Delta" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -139,9 +138,9 @@ * TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 @@ -153,7 +152,7 @@ //#define U_DRIVER_TYPE A4988 //#define V_DRIVER_TYPE A4988 //#define W_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -863,7 +862,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 300 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -1129,9 +1128,9 @@ //#define ENDSTOPPULLUP_UMIN //#define ENDSTOPPULLUP_VMIN //#define ENDSTOPPULLUP_WMIN - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_IMAX //#define ENDSTOPPULLUP_JMAX //#define ENDSTOPPULLUP_KMAX @@ -1171,11 +1170,11 @@ * Set to the state (HIGH or LOW) that applies to each endstop. */ #define X_MIN_ENDSTOP_HIT_STATE HIGH -#define X_MAX_ENDSTOP_HIT_STATE HIGH +#define X_MAX_ENDSTOP_HIT_STATE LOW #define Y_MIN_ENDSTOP_HIT_STATE HIGH -#define Y_MAX_ENDSTOP_HIT_STATE HIGH +#define Y_MAX_ENDSTOP_HIT_STATE LOW #define Z_MIN_ENDSTOP_HIT_STATE HIGH -#define Z_MAX_ENDSTOP_HIT_STATE HIGH +#define Z_MAX_ENDSTOP_HIT_STATE LOW #define I_MIN_ENDSTOP_HIT_STATE HIGH #define I_MAX_ENDSTOP_HIT_STATE HIGH #define J_MIN_ENDSTOP_HIT_STATE HIGH @@ -1236,7 +1235,16 @@ * Override with M92 (when enabled below) * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 391 } // default steps per unit for PowerWasp /** * Enable support for M92. Disable to save at least ~530 bytes of flash. @@ -1248,11 +1256,11 @@ * Override with M203 * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 300, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 600, 50 } // ...or, set your own edit limits #endif /** @@ -1261,7 +1269,7 @@ * Override with M201 * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -1288,11 +1296,11 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 10.0 #define DEFAULT_EJERK 5.0 //#define DEFAULT_IJERK 0.3 //#define DEFAULT_JJERK 0.3 @@ -1346,7 +1354,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1364,7 +1372,7 @@ * - Normally-closed (NC) also connect to GND. * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN -1 +#define Z_MIN_PROBE_PIN P0_10 /** * Probe Type @@ -1395,9 +1403,9 @@ /** * Z Servo Probe, such as an endstop switch on a rotating arm. */ -//#define Z_PROBE_SERVO_NR 0 +#define Z_PROBE_SERVO_NR 0 #ifdef Z_PROBE_SERVO_NR - //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles + #define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles //#define Z_SERVO_MEASURE_ANGLE 45 // Use if the servo must move to a "free" position for measuring after deploy //#define Z_SERVO_INTERMEDIATE_STOW // Stow the probe between points //#define Z_SERVO_DEACTIVATE_AFTER_STOW // Deactivate the servo when probe is stowed @@ -1406,7 +1414,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * MagLev V4 probe by MDD @@ -1581,7 +1589,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -14, -2.0 } // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 @@ -1591,16 +1599,16 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 30 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (60*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (30*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 20) /** * Probe Activation Switch @@ -1647,7 +1655,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1749,9 +1757,9 @@ // @section motion // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true //#define INVERT_I_DIR false //#define INVERT_J_DIR false //#define INVERT_K_DIR false @@ -1762,8 +1770,8 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1776,6 +1784,66 @@ //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define DELTA +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DEFAULT_SEGMENTS_PER_SECOND 100 + + // After homing move down to a height where XY movement is unconstrained + #define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + #define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + #define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 5 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max 0.9 * PRINTABLE_RADIUS for non-eccentric probes +// #define DELTA_CALIBRATION_RADIUS 110.0 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.025 + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define PRINTABLE_RADIUS 140.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 340.0 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 627.37 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 179.60 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.44, -0.15, -0.29 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + + /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. @@ -1793,9 +1861,9 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 //#define I_HOME_DIR -1 //#define J_HOME_DIR -1 //#define K_HOME_DIR -1 @@ -1821,16 +1889,16 @@ // @section geometry // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE ((PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((PRINTABLE_RADIUS) * 2) // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -(PRINTABLE_RADIUS) +#define Y_MIN_POS -(PRINTABLE_RADIUS) #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS (PRINTABLE_RADIUS) +#define Y_MAX_POS (PRINTABLE_RADIUS) +#define Z_MAX_POS MANUAL_Z_HOME_POS //#define I_MIN_POS 0 //#define I_MAX_POS 50 //#define J_MIN_POS 0 @@ -1898,7 +1966,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -2042,7 +2110,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -2073,7 +2141,7 @@ * Turn on with the command 'M111 S32'. * NOTE: Requires a lot of flash! */ -//#define DEBUG_LEVELING_FEATURE +#define DEBUG_LEVELING_FEATURE #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment @@ -2102,12 +2170,12 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define MESH_TEST_NOZZLE_SIZE 0.6 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.3 // (mm) Default layer height for G26. + #define MESH_TEST_HOTEND_TEMP 200 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_BED_TEMP 70 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. @@ -2151,7 +2219,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -2165,7 +2233,7 @@ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. - //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh + #define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh /** * Probing not allowed within the position of an obstacle. @@ -2193,7 +2261,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -2250,13 +2318,13 @@ // @section homing // The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 +#define BED_CENTER_AT_0_0 // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. //#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT //#define MANUAL_I_HOME_POS 0 //#define MANUAL_J_HOME_POS 0 //#define MANUAL_K_HOME_POS 0 @@ -2280,7 +2348,7 @@ #endif // Homing speeds (linear=mm/min, rotational=°/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (50*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -2358,7 +2426,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -2421,11 +2489,12 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + //#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 0, -100, 10 } #define NOZZLE_PARK_MOVE 0 // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) @@ -2695,7 +2764,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2931,7 +3000,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -3592,7 +3661,7 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands +#define NUM_SERVOS 1 // Note: Servo index starts with 0 for M280-M282 commands // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 299c6418f3..329798c116 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -681,7 +681,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN P2_03 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -690,7 +690,7 @@ #define E6_AUTO_FAN_PIN -1 #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 -#define COOLER_AUTO_FAN_PIN -1 +#define COOLER_AUTO_FAN_PIN P2_04 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed @@ -925,7 +925,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2, 0 } // (linear=mm, rotational=°) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (linear=mm, rotational=°) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing @@ -956,7 +956,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 300 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -1241,9 +1241,9 @@ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout. */ #define DEFAULT_STEPPER_TIMEOUT_SEC 120 -#define DISABLE_IDLE_X -#define DISABLE_IDLE_Y -#define DISABLE_IDLE_Z // Disable if the nozzle could fall onto your printed part! +//#define DISABLE_IDLE_X +//#define DISABLE_IDLE_Y +//#define DISABLE_IDLE_Z // Disable if the nozzle could fall onto your printed part! //#define DISABLE_IDLE_I //#define DISABLE_IDLE_J //#define DISABLE_IDLE_K @@ -1493,7 +1493,7 @@ #endif #if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI) - //#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu + #define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu #if ENABLED(PROBE_OFFSET_WIZARD) /** * Enable to init the Probe Z-Offset when starting the Wizard. @@ -2887,14 +2887,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 300 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -3337,7 +3337,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -4113,15 +4113,15 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PAUSE_M76 // Tell the host to pause in response to M76 - //#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback + #define HOST_PAUSE_M76 // Tell the host to pause in response to M76 + #define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback #if ENABLED(HOST_PROMPT_SUPPORT) - //#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications + #define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications #endif - //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start - //#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down + #define HOST_START_MENU_ITEM // Add a menu item that tells the host to start + #define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down #endif // @section extras @@ -4131,7 +4131,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS +#define CANCEL_OBJECTS #if ENABLED(CANCEL_OBJECTS) #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message #endif diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index e6a2abc0f0..7fbc243de0 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -94,7 +94,7 @@ #endif #if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #ifndef FAN1_PIN - #define FAN1_PIN P2_04 + #define FAN1_PIN P2_03 #endif #else #ifndef HEATER_1_PIN @@ -102,7 +102,7 @@ #endif #endif #ifndef FAN0_PIN - #define FAN0_PIN P2_03 + #define FAN0_PIN P2_04 #endif #ifndef HEATER_BED_PIN #define HEATER_BED_PIN P2_05 diff --git a/platformio.ini b/platformio.ini index 76200cbbd5..265cb03374 100644 --- a/platformio.ini +++ b/platformio.ini @@ -13,7 +13,7 @@ [platformio] src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards -default_envs = mega2560 +default_envs = LPC1768 include_dir = Marlin extra_configs = Marlin/config.ini