Endstop invert flags as macros instead of const bool
This commit is contained in:
parent
253f843da5
commit
39706f3e57
|
@ -610,35 +610,33 @@
|
||||||
#define _XMAX_ 101
|
#define _XMAX_ 101
|
||||||
#define _YMAX_ 201
|
#define _YMAX_ 201
|
||||||
#define _ZMAX_ 301
|
#define _ZMAX_ 301
|
||||||
const bool Z2_MAX_ENDSTOP_INVERTING =
|
#if Z2_USE_ENDSTOP == _XMAX_
|
||||||
#if Z2_USE_ENDSTOP == _XMAX_
|
#define Z2_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING
|
||||||
X_MAX_ENDSTOP_INVERTING
|
#define Z2_MAX_PIN X_MAX_PIN
|
||||||
#define Z2_MAX_PIN X_MAX_PIN
|
#undef USE_XMAX_PLUG
|
||||||
#undef USE_XMAX_PLUG
|
#elif Z2_USE_ENDSTOP == _YMAX_
|
||||||
#elif Z2_USE_ENDSTOP == _YMAX_
|
#define Z2_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING
|
||||||
Y_MAX_ENDSTOP_INVERTING
|
#define Z2_MAX_PIN Y_MAX_PIN
|
||||||
#define Z2_MAX_PIN Y_MAX_PIN
|
#undef USE_YMAX_PLUG
|
||||||
#undef USE_YMAX_PLUG
|
#elif Z2_USE_ENDSTOP == _ZMAX_
|
||||||
#elif Z2_USE_ENDSTOP == _ZMAX_
|
#define Z2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
|
||||||
Z_MAX_ENDSTOP_INVERTING
|
#define Z2_MAX_PIN Z_MAX_PIN
|
||||||
#define Z2_MAX_PIN Z_MAX_PIN
|
#undef USE_ZMAX_PLUG
|
||||||
#undef USE_ZMAX_PLUG
|
#elif Z2_USE_ENDSTOP == _XMIN_
|
||||||
#elif Z2_USE_ENDSTOP == _XMIN_
|
#define Z2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
|
||||||
X_MIN_ENDSTOP_INVERTING
|
#define Z2_MAX_PIN X_MIN_PIN
|
||||||
#define Z2_MAX_PIN X_MIN_PIN
|
#undef USE_XMIN_PLUG
|
||||||
#undef USE_XMIN_PLUG
|
#elif Z2_USE_ENDSTOP == _YMIN_
|
||||||
#elif Z2_USE_ENDSTOP == _YMIN_
|
#define Z2_MAX_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING
|
||||||
Y_MIN_ENDSTOP_INVERTING
|
#define Z2_MAX_PIN Y_MIN_PIN
|
||||||
#define Z2_MAX_PIN Y_MIN_PIN
|
#undef USE_YMIN_PLUG
|
||||||
#undef USE_YMIN_PLUG
|
#elif Z2_USE_ENDSTOP == _ZMIN_
|
||||||
#elif Z2_USE_ENDSTOP == _ZMIN_
|
#define Z2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
|
||||||
Z_MIN_ENDSTOP_INVERTING
|
#define Z2_MAX_PIN Z_MIN_PIN
|
||||||
#define Z2_MAX_PIN Z_MIN_PIN
|
#undef USE_ZMIN_PLUG
|
||||||
#undef USE_ZMIN_PLUG
|
#else
|
||||||
#else
|
#define Z2_MAX_ENDSTOP_INVERTING false
|
||||||
0
|
#endif
|
||||||
#endif
|
|
||||||
;
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/**
|
/**
|
||||||
|
|
|
@ -437,13 +437,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -437,13 +437,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -419,13 +419,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -417,13 +417,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -429,13 +429,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -431,13 +431,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -454,13 +454,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -414,13 +414,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -414,13 +414,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -437,13 +437,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -434,13 +434,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -445,13 +445,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -458,13 +458,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -429,13 +429,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -437,13 +437,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -479,13 +479,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -479,13 +479,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -479,13 +479,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -468,13 +468,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -477,13 +477,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -440,13 +440,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
|
@ -427,13 +427,13 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Z Probe Options =============================
|
//============================= Z Probe Options =============================
|
||||||
|
|
Loading…
Reference in a new issue