More featureful CR-10 configurations

See #7725

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -77,7 +77,7 @@
 #define STRING_CONFIG_H_AUTHOR "(Creality CR-10)" // Who made the changes.
 #define SHOW_BOOTSCREEN
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
-//#define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
+#define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
 //
 // *** VENDORS PLEASE READ *****************************************************
@@ -90,7 +90,7 @@
 // boot image unmodified. For an example have a look at the bq Hephestos 2
 // example configuration folder.
 //
-//#define SHOW_CUSTOM_BOOTSCREEN
+#define SHOW_CUSTOM_BOOTSCREEN
 
 // @section machine
 
@@ -703,7 +703,7 @@
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // Use double touch for probing
-#define PROBE_DOUBLE_TOUCH
+//#define PROBE_DOUBLE_TOUCH
 
 /**
  * Z probes require clearance when deploying, stowing, and moving between
@@ -789,7 +789,7 @@
 #define X_MIN_POS 0
 #define Y_MIN_POS 0
 #define Z_MIN_POS 0
-#define X_MAX_POS X_BED_SIZE
+#define X_MAX_POS X_BED_SIZE + 20
 #define Y_MAX_POS Y_BED_SIZE
 #define Z_MAX_POS 400
 
@@ -940,7 +940,7 @@
   #define UBL_PROBE_PT_3_X 180
   #define UBL_PROBE_PT_3_Y 20
 
-  #define UBL_G26_MESH_VALIDATION   // Enable G26 mesh validation
+  //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
 
 #elif ENABLED(MESH_BED_LEVELING)
@@ -997,6 +997,7 @@
 // - If stepper drivers time out, it will need X and Y homing again before Z homing.
 // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
 // - Prevent Z homing when the Z probe is outside bed area.
+//
 //#define Z_SAFE_HOMING
 
 #if ENABLED(Z_SAFE_HOMING)
@@ -1021,13 +1022,10 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-// Define this to enable EEPROM support
+//
-#define EEPROM_SETTINGS
+#define EEPROM_SETTINGS // Enable for M500 and M501 commands
-
-#if ENABLED(EEPROM_SETTINGS)
 //#define DISABLE_M503    // Saves ~2700 bytes of PROGMEM. Disable for release!
-  #define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
+#define EEPROM_CHITCHAT   // Give feedback on EEPROM commands. Disable to save PROGMEM.
-#endif
 
 //
 // Host Keepalive
@@ -1057,7 +1055,7 @@
 // @section temperature
 
 // Preheat Constants
-#define PREHEAT_1_TEMP_HOTEND 200
+#define PREHEAT_1_TEMP_HOTEND 190
 #define PREHEAT_1_TEMP_BED     70
 #define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
 
@@ -1160,7 +1158,7 @@
  *   M76 - Pause the print job timer
  *   M77 - Stop the print job timer
  */
-//#define PRINTJOB_TIMER_AUTOSTART
+#define PRINTJOB_TIMER_AUTOSTART
 
 /**
  * Print Counter

Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h

@@ -0,0 +1,100 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Tongue-in-cheek placeholder for a more Marlin-specific bitmap
+ * The joke is that every "CR-10" has different branding!
+ * Made using The Gimp and...
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+#include <avr/pgmspace.h>
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  54
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  0x00, 0x00, 0x00, 0x01, 0xE0, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x3F, 0xF8, 0x00, 0x00,
+  0x00, 0x00, 0x03, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0x0F, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0x3F, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0x7F, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0x7F, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x0F, 0xF0,
+  0x00, 0x00, 0xFF, 0xFF, 0xFD, 0xFF, 0xF8,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8,
+  0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
+  0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
+  0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x00,
+  0x7F, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x7F, 0xFC, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x1F, 0x80, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0xFF, 0xFF, 0xFE, 0x3F, 0xF8,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8,
+  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xE0,
+  0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xC0,
+  0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFE, 0x00,
+  0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xE0, 0x00,
+  0x00, 0x00, 0x07, 0xFF, 0xFC, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x00
+};