0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

🧑‍💻 Simplify endstops config (#25748)

Browse source
This commit is contained in:
Scott Lahteine 2023-04-26 14:56:23 -05:00 committed by GitHub
parent 358a54ecdc
commit 467ab74523
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
40 changed files with 1286 additions and 1987 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

22
Marlin/Configuration.h
View file

@ -1087,28 +1087,6 @@
// @section endstops
// Specify here all the endstop connectors that are connected to any endstop or probe.
// Almost all printers will be using one per axis. Probes will use one or more of the
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
#define USE_XMIN_PLUG
#define USE_YMIN_PLUG
#define USE_ZMIN_PLUG
//#define USE_IMIN_PLUG
//#define USE_JMIN_PLUG
//#define USE_KMIN_PLUG
//#define USE_UMIN_PLUG
//#define USE_VMIN_PLUG
//#define USE_WMIN_PLUG
//#define USE_XMAX_PLUG
//#define USE_YMAX_PLUG
//#define USE_ZMAX_PLUG
//#define USE_IMAX_PLUG
//#define USE_JMAX_PLUG
//#define USE_KMAX_PLUG
//#define USE_UMAX_PLUG
//#define USE_VMAX_PLUG
//#define USE_WMAX_PLUG
// Enable pullup for all endstops to prevent a floating state
#define ENDSTOPPULLUPS
#if DISABLED(ENDSTOPPULLUPS)

12
Marlin/Configuration_adv.h
View file

@ -849,13 +849,13 @@
* Get the offset by homing X and measuring the error.
* Also set with 'M666 X<offset>' and stored to EEPROM with 'M500'.
*
* - Use X2_USE_ENDSTOP to set the endstop plug by name. (_XMIN_, _XMAX_, _YMIN_, _YMAX_, _ZMIN_, _ZMAX_)
* - Define the extra endstop pins here to override defaults. No auto-assignment.
*/
#if HAS_X2_STEPPER && DISABLED(DUAL_X_CARRIAGE)
//#define INVERT_X2_VS_X_DIR // X2 direction signal is the opposite of X
//#define X_DUAL_ENDSTOPS // X2 has its own endstop
#if ENABLED(X_DUAL_ENDSTOPS)
#define X2_USE_ENDSTOP _XMAX_ // X2 endstop board plug. Don't forget to enable USE_*_PLUG.
//#define X2_STOP_PIN X_MAX_PIN // X2 endstop pin override
#define X2_ENDSTOP_ADJUSTMENT 0 // X2 offset relative to X endstop
#endif
#endif
@ -864,7 +864,7 @@
//#define INVERT_Y2_VS_Y_DIR // Y2 direction signal is the opposite of Y
//#define Y_DUAL_ENDSTOPS // Y2 has its own endstop
#if ENABLED(Y_DUAL_ENDSTOPS)
#define Y2_USE_ENDSTOP _YMAX_ // Y2 endstop board plug. Don't forget to enable USE_*_PLUG.
//#define Y2_STOP_PIN Y_MAX_PIN // Y2 endstop pin override
#define Y2_ENDSTOP_ADJUSTMENT 0 // Y2 offset relative to Y endstop
#endif
#endif
@ -877,20 +877,20 @@
//#define Z_MULTI_ENDSTOPS // Other Z axes have their own endstops
#if ENABLED(Z_MULTI_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ // Z2 endstop board plug. Don't forget to enable USE_*_PLUG.
//#define Z2_STOP_PIN X_MAX_PIN // Z2 endstop pin override
#define Z2_ENDSTOP_ADJUSTMENT 0 // Z2 offset relative to Z endstop
#endif
#ifdef Z3_DRIVER_TYPE
//#define INVERT_Z3_VS_Z_DIR // Z3 direction signal is the opposite of Z
#if ENABLED(Z_MULTI_ENDSTOPS)
#define Z3_USE_ENDSTOP _YMAX_ // Z3 endstop board plug. Don't forget to enable USE_*_PLUG.
//#define Z3_STOP_PIN Y_MAX_PIN // Z3 endstop pin override
#define Z3_ENDSTOP_ADJUSTMENT 0 // Z3 offset relative to Z endstop
#endif
#endif
#ifdef Z4_DRIVER_TYPE
//#define INVERT_Z4_VS_Z_DIR // Z4 direction signal is the opposite of Z
#if ENABLED(Z_MULTI_ENDSTOPS)
#define Z4_USE_ENDSTOP _ZMAX_ // Z4 endstop board plug. Don't forget to enable USE_*_PLUG.
//#define Z4_STOP_PIN Z_MAX_PIN // Z4 endstop pin override
#define Z4_ENDSTOP_ADJUSTMENT 0 // Z4 offset relative to Z endstop
#endif
#endif

26
Marlin/src/HAL/AVR/endstop_interrupts.h
View file

@ -160,7 +160,7 @@ void setup_endstop_interrupts() {
pciSetup(Z_MAX_PIN);
#endif
#endif
#if HAS_Z_MIN
#if HAS_Z_MIN_PIN
#if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z_MIN_PIN);
#else
@ -172,14 +172,14 @@ void setup_endstop_interrupts() {
#if (digitalPinToInterrupt(I_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(I_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(I_MAX_PIN), "I_MAX_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(I_MAX_PIN), "I_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(I_MAX_PIN);
#endif
#elif HAS_I_MIN
#if (digitalPinToInterrupt(I_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(I_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(I_MIN_PIN), "I_MIN_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(I_MIN_PIN), "I_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(I_MIN_PIN);
#endif
#endif
@ -187,14 +187,14 @@ void setup_endstop_interrupts() {
#if (digitalPinToInterrupt(J_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(J_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(J_MAX_PIN), "J_MAX_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(J_MAX_PIN), "J_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(J_MAX_PIN);
#endif
#elif HAS_J_MIN
#if (digitalPinToInterrupt(J_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(J_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(J_MIN_PIN), "J_MIN_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(J_MIN_PIN), "J_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(J_MIN_PIN);
#endif
#endif
@ -202,14 +202,14 @@ void setup_endstop_interrupts() {
#if (digitalPinToInterrupt(K_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(K_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(K_MAX_PIN), "K_MAX_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(K_MAX_PIN), "K_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(K_MAX_PIN);
#endif
#elif HAS_K_MIN
#if (digitalPinToInterrupt(K_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(K_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(K_MIN_PIN), "K_MIN_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(K_MIN_PIN), "K_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(K_MIN_PIN);
#endif
#endif
@ -217,14 +217,14 @@ void setup_endstop_interrupts() {
#if (digitalPinToInterrupt(U_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(U_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(U_MAX_PIN), "U_MAX_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(U_MAX_PIN), "U_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(U_MAX_PIN);
#endif
#elif HAS_U_MIN
#if (digitalPinToInterrupt(U_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(U_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(U_MIN_PIN), "U_MIN_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(U_MIN_PIN), "U_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(U_MIN_PIN);
#endif
#endif
@ -232,14 +232,14 @@ void setup_endstop_interrupts() {
#if (digitalPinToInterrupt(V_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(V_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(V_MAX_PIN), "V_MAX_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(V_MAX_PIN), "V_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(V_MAX_PIN);
#endif
#elif HAS_V_MIN
#if (digitalPinToInterrupt(V_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(V_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(V_MIN_PIN), "V_MIN_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(V_MIN_PIN), "V_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(V_MIN_PIN);
#endif
#endif
@ -247,14 +247,14 @@ void setup_endstop_interrupts() {
#if (digitalPinToInterrupt(W_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(W_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(W_MAX_PIN), "W_MAX_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(W_MAX_PIN), "W_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(W_MAX_PIN);
#endif
#elif HAS_W_MIN
#if (digitalPinToInterrupt(W_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(W_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(W_MIN_PIN), "W_MIN_PIN is not interrupt-capable");
static_assert(digitalPinHasPCICR(W_MIN_PIN), "W_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(W_MIN_PIN);
#endif
#endif

56
Marlin/src/HAL/DUE/endstop_interrupts.h
View file

@ -47,33 +47,33 @@ void endstop_ISR() { endstops.update(); }
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN_PIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
}

56
Marlin/src/HAL/ESP32/endstop_interrupts.h
View file

@ -42,33 +42,33 @@ void ICACHE_RAM_ATTR endstop_ISR() { endstops.update(); }
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN_PIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
}

50
Marlin/src/HAL/LPC1768/endstop_interrupts.h
View file

@ -74,12 +74,36 @@ void setup_endstop_interrupts() {
#endif
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
#if HAS_Z_MIN_PIN
#if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PIN)
#error "Z_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_X2_MAX
#if !LPC1768_PIN_INTERRUPT_M(X2_MAX_PIN)
#error "X2_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(X2_MAX_PIN);
#endif
#if HAS_X2_MIN
#if !LPC1768_PIN_INTERRUPT_M(X2_MIN_PIN)
#error "X2_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(X2_MIN_PIN);
#endif
#if HAS_Y2_MAX
#if !LPC1768_PIN_INTERRUPT_M(Y2_MAX_PIN)
#error "Y2_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Y2_MAX_PIN);
#endif
#if HAS_Y2_MIN
#if !LPC1768_PIN_INTERRUPT_M(Y2_MIN_PIN)
#error "Y2_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Y2_MIN_PIN);
#endif
#if HAS_Z2_MAX
#if !LPC1768_PIN_INTERRUPT_M(Z2_MAX_PIN)
#error "Z2_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
@ -124,67 +148,67 @@ void setup_endstop_interrupts() {
#endif
#if HAS_I_MAX
#if !LPC1768_PIN_INTERRUPT_M(I_MAX_PIN)
#error "I_MAX_PIN is not INTERRUPT-capable."
#error "I_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(I_MAX_PIN);
#elif HAS_I_MIN
#if !LPC1768_PIN_INTERRUPT_M(I_MIN_PIN)
#error "I_MIN_PIN is not INTERRUPT-capable."
#error "I_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(I_MIN_PIN);
#endif
#if HAS_J_MAX
#if !LPC1768_PIN_INTERRUPT_M(J_MAX_PIN)
#error "J_MAX_PIN is not INTERRUPT-capable."
#error "J_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(J_MAX_PIN);
#elif HAS_J_MIN
#if !LPC1768_PIN_INTERRUPT_M(J_MIN_PIN)
#error "J_MIN_PIN is not INTERRUPT-capable."
#error "J_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(J_MIN_PIN);
#endif
#if HAS_K_MAX
#if !LPC1768_PIN_INTERRUPT_M(K_MAX_PIN)
#error "K_MAX_PIN is not INTERRUPT-capable."
#error "K_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(K_MAX_PIN);
#elif HAS_K_MIN
#if !LPC1768_PIN_INTERRUPT_M(K_MIN_PIN)
#error "K_MIN_PIN is not INTERRUPT-capable."
#error "K_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(K_MIN_PIN);
#endif
#if HAS_U_MAX
#if !LPC1768_PIN_INTERRUPT_M(U_MAX_PIN)
#error "U_MAX_PIN is not INTERRUPT-capable."
#error "U_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(U_MAX_PIN);
#elif HAS_U_MIN
#if !LPC1768_PIN_INTERRUPT_M(U_MIN_PIN)
#error "U_MIN_PIN is not INTERRUPT-capable."
#error "U_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(U_MIN_PIN);
#endif
#if HAS_V_MAX
#if !LPC1768_PIN_INTERRUPT_M(V_MAX_PIN)
#error "V_MAX_PIN is not INTERRUPT-capable."
#error "V_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(V_MAX_PIN);
#elif HAS_V_MIN
#if !LPC1768_PIN_INTERRUPT_M(V_MIN_PIN)
#error "V_MIN_PIN is not INTERRUPT-capable."
#error "V_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(V_MIN_PIN);
#endif
#if HAS_W_MAX
#if !LPC1768_PIN_INTERRUPT_M(W_MAX_PIN)
#error "W_MAX_PIN is not INTERRUPT-capable."
#error "W_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(W_MAX_PIN);
#elif HAS_W_MIN
#if !LPC1768_PIN_INTERRUPT_M(W_MIN_PIN)
#error "W_MIN_PIN is not INTERRUPT-capable."
#error "W_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(W_MIN_PIN);
#endif

130
Marlin/src/HAL/SAMD21/endstop_interrupts.h
View file

@ -54,30 +54,34 @@
#include "../../module/endstops.h"
#define MATCH_EILINE(P1,P2) (P1 != P2 && PIN_TO_EILINE(P1) == PIN_TO_EILINE(P2))
#define MATCH_X_MAX_EILINE(P) TERN0(HAS_X_MAX, DEFER4(MATCH_EILINE)(P, X_MAX_PIN))
#define MATCH_X_MIN_EILINE(P) TERN0(HAS_X_MIN, DEFER4(MATCH_EILINE)(P, X_MIN_PIN))
#define MATCH_Y_MAX_EILINE(P) TERN0(HAS_Y_MAX, DEFER4(MATCH_EILINE)(P, Y_MAX_PIN))
#define MATCH_Y_MIN_EILINE(P) TERN0(HAS_Y_MIN, DEFER4(MATCH_EILINE)(P, Y_MIN_PIN))
#define MATCH_Z_MAX_EILINE(P) TERN0(HAS_Z_MAX, DEFER4(MATCH_EILINE)(P, Z_MAX_PIN))
#define MATCH_Z_MIN_EILINE(P) TERN0(HAS_Z_MIN, DEFER4(MATCH_EILINE)(P, Z_MIN_PIN))
#define MATCH_I_MAX_EILINE(P) TERN0(HAS_I_MAX, DEFER4(MATCH_EILINE)(P, I_MAX_PIN))
#define MATCH_I_MIN_EILINE(P) TERN0(HAS_I_MIN, DEFER4(MATCH_EILINE)(P, I_MIN_PIN))
#define MATCH_J_MAX_EILINE(P) TERN0(HAS_J_MAX, DEFER4(MATCH_EILINE)(P, J_MAX_PIN))
#define MATCH_J_MIN_EILINE(P) TERN0(HAS_J_MIN, DEFER4(MATCH_EILINE)(P, J_MIN_PIN))
#define MATCH_K_MAX_EILINE(P) TERN0(HAS_K_MAX, DEFER4(MATCH_EILINE)(P, K_MAX_PIN))
#define MATCH_K_MIN_EILINE(P) TERN0(HAS_K_MIN, DEFER4(MATCH_EILINE)(P, K_MIN_PIN))
#define MATCH_U_MAX_EILINE(P) TERN0(HAS_U_MAX, DEFER4(MATCH_EILINE)(P, U_MAX_PIN))
#define MATCH_U_MIN_EILINE(P) TERN0(HAS_U_MIN, DEFER4(MATCH_EILINE)(P, U_MIN_PIN))
#define MATCH_V_MAX_EILINE(P) TERN0(HAS_V_MAX, DEFER4(MATCH_EILINE)(P, V_MAX_PIN))
#define MATCH_V_MIN_EILINE(P) TERN0(HAS_V_MIN, DEFER4(MATCH_EILINE)(P, V_MIN_PIN))
#define MATCH_W_MAX_EILINE(P) TERN0(HAS_W_MAX, DEFER4(MATCH_EILINE)(P, W_MAX_PIN))
#define MATCH_W_MIN_EILINE(P) TERN0(HAS_W_MIN, DEFER4(MATCH_EILINE)(P, W_MIN_PIN))
#define MATCH_Z2_MAX_EILINE(P) TERN0(HAS_Z2_MAX, DEFER4(MATCH_EILINE)(P, Z2_MAX_PIN))
#define MATCH_Z2_MIN_EILINE(P) TERN0(HAS_Z2_MIN, DEFER4(MATCH_EILINE)(P, Z2_MIN_PIN))
#define MATCH_Z3_MAX_EILINE(P) TERN0(HAS_Z3_MAX, DEFER4(MATCH_EILINE)(P, Z3_MAX_PIN))
#define MATCH_Z3_MIN_EILINE(P) TERN0(HAS_Z3_MIN, DEFER4(MATCH_EILINE)(P, Z3_MIN_PIN))
#define MATCH_Z4_MAX_EILINE(P) TERN0(HAS_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
#define MATCH_Z4_MIN_EILINE(P) TERN0(HAS_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
#define MATCH_X_MAX_EILINE(P) TERN0(HAS_X_MAX, DEFER4(MATCH_EILINE)(P, X_MAX_PIN))
#define MATCH_X_MIN_EILINE(P) TERN0(HAS_X_MIN, DEFER4(MATCH_EILINE)(P, X_MIN_PIN))
#define MATCH_Y_MAX_EILINE(P) TERN0(HAS_Y_MAX, DEFER4(MATCH_EILINE)(P, Y_MAX_PIN))
#define MATCH_Y_MIN_EILINE(P) TERN0(HAS_Y_MIN, DEFER4(MATCH_EILINE)(P, Y_MIN_PIN))
#define MATCH_Z_MAX_EILINE(P) TERN0(HAS_Z_MAX, DEFER4(MATCH_EILINE)(P, Z_MAX_PIN))
#define MATCH_Z_MIN_EILINE(P) TERN0(HAS_Z_MIN_PIN, DEFER4(MATCH_EILINE)(P, Z_MIN_PIN))
#define MATCH_I_MAX_EILINE(P) TERN0(HAS_I_MAX, DEFER4(MATCH_EILINE)(P, I_MAX_PIN))
#define MATCH_I_MIN_EILINE(P) TERN0(HAS_I_MIN, DEFER4(MATCH_EILINE)(P, I_MIN_PIN))
#define MATCH_J_MAX_EILINE(P) TERN0(HAS_J_MAX, DEFER4(MATCH_EILINE)(P, J_MAX_PIN))
#define MATCH_J_MIN_EILINE(P) TERN0(HAS_J_MIN, DEFER4(MATCH_EILINE)(P, J_MIN_PIN))
#define MATCH_K_MAX_EILINE(P) TERN0(HAS_K_MAX, DEFER4(MATCH_EILINE)(P, K_MAX_PIN))
#define MATCH_K_MIN_EILINE(P) TERN0(HAS_K_MIN, DEFER4(MATCH_EILINE)(P, K_MIN_PIN))
#define MATCH_U_MAX_EILINE(P) TERN0(HAS_U_MAX, DEFER4(MATCH_EILINE)(P, U_MAX_PIN))
#define MATCH_U_MIN_EILINE(P) TERN0(HAS_U_MIN, DEFER4(MATCH_EILINE)(P, U_MIN_PIN))
#define MATCH_V_MAX_EILINE(P) TERN0(HAS_V_MAX, DEFER4(MATCH_EILINE)(P, V_MAX_PIN))
#define MATCH_V_MIN_EILINE(P) TERN0(HAS_V_MIN, DEFER4(MATCH_EILINE)(P, V_MIN_PIN))
#define MATCH_W_MAX_EILINE(P) TERN0(HAS_W_MAX, DEFER4(MATCH_EILINE)(P, W_MAX_PIN))
#define MATCH_W_MIN_EILINE(P) TERN0(HAS_W_MIN, DEFER4(MATCH_EILINE)(P, W_MIN_PIN))
#define MATCH_X2_MAX_EILINE(P) TERN0(HAS_X2_MAX, DEFER4(MATCH_EILINE)(P, X2_MAX_PIN))
#define MATCH_X2_MIN_EILINE(P) TERN0(HAS_X2_MIN, DEFER4(MATCH_EILINE)(P, X2_MIN_PIN))
#define MATCH_Y2_MAX_EILINE(P) TERN0(HAS_Y2_MAX, DEFER4(MATCH_EILINE)(P, Y2_MAX_PIN))
#define MATCH_Y2_MIN_EILINE(P) TERN0(HAS_Y2_MIN, DEFER4(MATCH_EILINE)(P, Y2_MIN_PIN))
#define MATCH_Z2_MAX_EILINE(P) TERN0(HAS_Z2_MAX, DEFER4(MATCH_EILINE)(P, Z2_MAX_PIN))
#define MATCH_Z2_MIN_EILINE(P) TERN0(HAS_Z2_MIN, DEFER4(MATCH_EILINE)(P, Z2_MIN_PIN))
#define MATCH_Z3_MAX_EILINE(P) TERN0(HAS_Z3_MAX, DEFER4(MATCH_EILINE)(P, Z3_MAX_PIN))
#define MATCH_Z3_MIN_EILINE(P) TERN0(HAS_Z3_MIN, DEFER4(MATCH_EILINE)(P, Z3_MIN_PIN))
#define MATCH_Z4_MAX_EILINE(P) TERN0(HAS_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
#define MATCH_Z4_MIN_EILINE(P) TERN0(HAS_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
#define MATCH_Z_MIN_PROBE_EILINE(P) TERN0(HAS_Z_MIN_PROBE_PIN, DEFER4(MATCH_EILINE)(P, Z_MIN_PROBE_PIN))
#define AVAILABLE_EILINE(P) ( PIN_TO_EILINE(P) != -1 \
@ -90,6 +94,8 @@
&& !MATCH_U_MAX_EILINE(P) && !MATCH_U_MIN_EILINE(P) \
&& !MATCH_V_MAX_EILINE(P) && !MATCH_V_MIN_EILINE(P) \
&& !MATCH_W_MAX_EILINE(P) && !MATCH_W_MIN_EILINE(P) \
&& !MATCH_X2_MAX_EILINE(P) && !MATCH_X2_MIN_EILINE(P) \
&& !MATCH_Y2_MAX_EILINE(P) && !MATCH_Y2_MIN_EILINE(P) \
&& !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P) \
&& !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P) \
&& !MATCH_Z4_MAX_EILINE(P) && !MATCH_Z4_MIN_EILINE(P) \
@ -102,151 +108,175 @@ void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(P, endstop_ISR, CHANGE)
#if HAS_X_MAX
#if !AVAILABLE_EILINE(X_MAX_PIN)
#error "X_MAX_PIN has no EXTINT line available."
#error "X_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
#if !AVAILABLE_EILINE(X_MIN_PIN)
#error "X_MIN_PIN has no EXTINT line available."
#error "X_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
#if !AVAILABLE_EILINE(Y_MAX_PIN)
#error "Y_MAX_PIN has no EXTINT line available."
#error "Y_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
#if !AVAILABLE_EILINE(Y_MIN_PIN)
#error "Y_MIN_PIN has no EXTINT line available."
#error "Y_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
#if !AVAILABLE_EILINE(Z_MAX_PIN)
#error "Z_MAX_PIN has no EXTINT line available."
#error "Z_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
#if HAS_Z_MIN_PIN
#if !AVAILABLE_EILINE(Z_MIN_PIN)
#error "Z_MIN_PIN has no EXTINT line available."
#error "Z_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_X2_MAX
#if !AVAILABLE_EILINE(X2_MAX_PIN)
#error "X2_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(X2_MAX_PIN);
#endif
#if HAS_X2_MIN
#if !AVAILABLE_EILINE(X2_MIN_PIN)
#error "X2_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(X2_MIN_PIN);
#endif
#if HAS_Y2_MAX
#if !AVAILABLE_EILINE(Y2_MAX_PIN)
#error "Y2_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Y2_MAX_PIN);
#endif
#if HAS_Y2_MIN
#if !AVAILABLE_EILINE(Y2_MIN_PIN)
#error "Y2_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Y2_MIN_PIN);
#endif
#if HAS_Z2_MAX
#if !AVAILABLE_EILINE(Z2_MAX_PIN)
#error "Z2_MAX_PIN has no EXTINT line available."
#error "Z2_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
#if !AVAILABLE_EILINE(Z2_MIN_PIN)
#error "Z2_MIN_PIN has no EXTINT line available."
#error "Z2_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z3_MAX
#if !AVAILABLE_EILINE(Z3_MAX_PIN)
#error "Z3_MAX_PIN has no EXTINT line available."
#error "Z3_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z3_MAX_PIN);
#endif
#if HAS_Z3_MIN
#if !AVAILABLE_EILINE(Z3_MIN_PIN)
#error "Z3_MIN_PIN has no EXTINT line available."
#error "Z3_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z3_MIN_PIN);
#endif
#if HAS_Z4_MAX
#if !AVAILABLE_EILINE(Z4_MAX_PIN)
#error "Z4_MAX_PIN has no EXTINT line available."
#error "Z4_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z4_MAX_PIN);
#endif
#if HAS_Z4_MIN
#if !AVAILABLE_EILINE(Z4_MIN_PIN)
#error "Z4_MIN_PIN has no EXTINT line available."
#error "Z4_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z4_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
#if !AVAILABLE_EILINE(Z_MIN_PROBE_PIN)
#error "Z_MIN_PROBE_PIN has no EXTINT line available."
#error "Z_MIN_PROBE_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z_MIN_PROBE_PIN);
#endif
#if HAS_I_MAX
#if !AVAILABLE_EILINE(I_MAX_PIN)
#error "I_MAX_PIN has no EXTINT line available."
#error "I_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(I_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_I_MIN
#if !AVAILABLE_EILINE(I_MIN_PIN)
#error "I_MIN_PIN has no EXTINT line available."
#error "I_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(I_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_J_MAX
#if !AVAILABLE_EILINE(J_MAX_PIN)
#error "J_MAX_PIN has no EXTINT line available."
#error "J_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(J_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_J_MIN
#if !AVAILABLE_EILINE(J_MIN_PIN)
#error "J_MIN_PIN has no EXTINT line available."
#error "J_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(J_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_K_MAX
#if !AVAILABLE_EILINE(K_MAX_PIN)
#error "K_MAX_PIN has no EXTINT line available."
#error "K_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(K_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_K_MIN
#if !AVAILABLE_EILINE(K_MIN_PIN)
#error "K_MIN_PIN has no EXTINT line available."
#error "K_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(K_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_U_MAX
#if !AVAILABLE_EILINE(U_MAX_PIN)
#error "U_MAX_PIN has no EXTINT line available."
#error "U_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(U_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_U_MIN
#if !AVAILABLE_EILINE(U_MIN_PIN)
#error "U_MIN_PIN has no EXTINT line available."
#error "U_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(U_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_V_MAX
#if !AVAILABLE_EILINE(V_MAX_PIN)
#error "V_MAX_PIN has no EXTINT line available."
#error "V_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(V_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_V_MIN
#if !AVAILABLE_EILINE(V_MIN_PIN)
#error "V_MIN_PIN has no EXTINT line available."
#error "V_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(V_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_W_MAX
#if !AVAILABLE_EILINE(W_MAX_PIN)
#error "W_MAX_PIN has no EXTINT line available."
#error "W_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(W_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_W_MIN
#if !AVAILABLE_EILINE(W_MIN_PIN)
#error "W_MIN_PIN has no EXTINT line available."
#error "W_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(W_MIN_PIN, endstop_ISR, CHANGE);
#endif

106
Marlin/src/HAL/SAMD51/endstop_interrupts.h
View file

@ -53,30 +53,34 @@
#include "../../module/endstops.h"
#define MATCH_EILINE(P1,P2) (P1 != P2 && PIN_TO_EILINE(P1) == PIN_TO_EILINE(P2))
#define MATCH_X_MAX_EILINE(P) TERN0(HAS_X_MAX, DEFER4(MATCH_EILINE)(P, X_MAX_PIN))
#define MATCH_X_MIN_EILINE(P) TERN0(HAS_X_MIN, DEFER4(MATCH_EILINE)(P, X_MIN_PIN))
#define MATCH_Y_MAX_EILINE(P) TERN0(HAS_Y_MAX, DEFER4(MATCH_EILINE)(P, Y_MAX_PIN))
#define MATCH_Y_MIN_EILINE(P) TERN0(HAS_Y_MIN, DEFER4(MATCH_EILINE)(P, Y_MIN_PIN))
#define MATCH_Z_MAX_EILINE(P) TERN0(HAS_Z_MAX, DEFER4(MATCH_EILINE)(P, Z_MAX_PIN))
#define MATCH_Z_MIN_EILINE(P) TERN0(HAS_Z_MIN, DEFER4(MATCH_EILINE)(P, Z_MIN_PIN))
#define MATCH_I_MAX_EILINE(P) TERN0(HAS_I_MAX, DEFER4(MATCH_EILINE)(P, I_MAX_PIN))
#define MATCH_I_MIN_EILINE(P) TERN0(HAS_I_MIN, DEFER4(MATCH_EILINE)(P, I_MIN_PIN))
#define MATCH_J_MAX_EILINE(P) TERN0(HAS_J_MAX, DEFER4(MATCH_EILINE)(P, J_MAX_PIN))
#define MATCH_J_MIN_EILINE(P) TERN0(HAS_J_MIN, DEFER4(MATCH_EILINE)(P, J_MIN_PIN))
#define MATCH_K_MAX_EILINE(P) TERN0(HAS_K_MAX, DEFER4(MATCH_EILINE)(P, K_MAX_PIN))
#define MATCH_K_MIN_EILINE(P) TERN0(HAS_K_MIN, DEFER4(MATCH_EILINE)(P, K_MIN_PIN))
#define MATCH_U_MAX_EILINE(P) TERN0(HAS_U_MAX, DEFER4(MATCH_EILINE)(P, U_MAX_PIN))
#define MATCH_U_MIN_EILINE(P) TERN0(HAS_U_MIN, DEFER4(MATCH_EILINE)(P, U_MIN_PIN))
#define MATCH_V_MAX_EILINE(P) TERN0(HAS_V_MAX, DEFER4(MATCH_EILINE)(P, V_MAX_PIN))
#define MATCH_V_MIN_EILINE(P) TERN0(HAS_V_MIN, DEFER4(MATCH_EILINE)(P, V_MIN_PIN))
#define MATCH_W_MAX_EILINE(P) TERN0(HAS_W_MAX, DEFER4(MATCH_EILINE)(P, W_MAX_PIN))
#define MATCH_W_MIN_EILINE(P) TERN0(HAS_W_MIN, DEFER4(MATCH_EILINE)(P, W_MIN_PIN))
#define MATCH_Z2_MAX_EILINE(P) TERN0(HAS_Z2_MAX, DEFER4(MATCH_EILINE)(P, Z2_MAX_PIN))
#define MATCH_Z2_MIN_EILINE(P) TERN0(HAS_Z2_MIN, DEFER4(MATCH_EILINE)(P, Z2_MIN_PIN))
#define MATCH_Z3_MAX_EILINE(P) TERN0(HAS_Z3_MAX, DEFER4(MATCH_EILINE)(P, Z3_MAX_PIN))
#define MATCH_Z3_MIN_EILINE(P) TERN0(HAS_Z3_MIN, DEFER4(MATCH_EILINE)(P, Z3_MIN_PIN))
#define MATCH_Z4_MAX_EILINE(P) TERN0(HAS_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
#define MATCH_Z4_MIN_EILINE(P) TERN0(HAS_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
#define MATCH_X_MAX_EILINE(P) TERN0(HAS_X_MAX, DEFER4(MATCH_EILINE)(P, X_MAX_PIN))
#define MATCH_X_MIN_EILINE(P) TERN0(HAS_X_MIN, DEFER4(MATCH_EILINE)(P, X_MIN_PIN))
#define MATCH_Y_MAX_EILINE(P) TERN0(HAS_Y_MAX, DEFER4(MATCH_EILINE)(P, Y_MAX_PIN))
#define MATCH_Y_MIN_EILINE(P) TERN0(HAS_Y_MIN, DEFER4(MATCH_EILINE)(P, Y_MIN_PIN))
#define MATCH_Z_MAX_EILINE(P) TERN0(HAS_Z_MAX, DEFER4(MATCH_EILINE)(P, Z_MAX_PIN))
#define MATCH_Z_MIN_EILINE(P) TERN0(HAS_Z_MIN_PIN, DEFER4(MATCH_EILINE)(P, Z_MIN_PIN))
#define MATCH_I_MAX_EILINE(P) TERN0(HAS_I_MAX, DEFER4(MATCH_EILINE)(P, I_MAX_PIN))
#define MATCH_I_MIN_EILINE(P) TERN0(HAS_I_MIN, DEFER4(MATCH_EILINE)(P, I_MIN_PIN))
#define MATCH_J_MAX_EILINE(P) TERN0(HAS_J_MAX, DEFER4(MATCH_EILINE)(P, J_MAX_PIN))
#define MATCH_J_MIN_EILINE(P) TERN0(HAS_J_MIN, DEFER4(MATCH_EILINE)(P, J_MIN_PIN))
#define MATCH_K_MAX_EILINE(P) TERN0(HAS_K_MAX, DEFER4(MATCH_EILINE)(P, K_MAX_PIN))
#define MATCH_K_MIN_EILINE(P) TERN0(HAS_K_MIN, DEFER4(MATCH_EILINE)(P, K_MIN_PIN))
#define MATCH_U_MAX_EILINE(P) TERN0(HAS_U_MAX, DEFER4(MATCH_EILINE)(P, U_MAX_PIN))
#define MATCH_U_MIN_EILINE(P) TERN0(HAS_U_MIN, DEFER4(MATCH_EILINE)(P, U_MIN_PIN))
#define MATCH_V_MAX_EILINE(P) TERN0(HAS_V_MAX, DEFER4(MATCH_EILINE)(P, V_MAX_PIN))
#define MATCH_V_MIN_EILINE(P) TERN0(HAS_V_MIN, DEFER4(MATCH_EILINE)(P, V_MIN_PIN))
#define MATCH_W_MAX_EILINE(P) TERN0(HAS_W_MAX, DEFER4(MATCH_EILINE)(P, W_MAX_PIN))
#define MATCH_W_MIN_EILINE(P) TERN0(HAS_W_MIN, DEFER4(MATCH_EILINE)(P, W_MIN_PIN))
#define MATCH_X2_MAX_EILINE(P) TERN0(HAS_X2_MAX, DEFER4(MATCH_EILINE)(P, X2_MAX_PIN))
#define MATCH_X2_MIN_EILINE(P) TERN0(HAS_X2_MIN, DEFER4(MATCH_EILINE)(P, X2_MIN_PIN))
#define MATCH_Y2_MAX_EILINE(P) TERN0(HAS_Y2_MAX, DEFER4(MATCH_EILINE)(P, Y2_MAX_PIN))
#define MATCH_Y2_MIN_EILINE(P) TERN0(HAS_Y2_MIN, DEFER4(MATCH_EILINE)(P, Y2_MIN_PIN))
#define MATCH_Z2_MAX_EILINE(P) TERN0(HAS_Z2_MAX, DEFER4(MATCH_EILINE)(P, Z2_MAX_PIN))
#define MATCH_Z2_MIN_EILINE(P) TERN0(HAS_Z2_MIN, DEFER4(MATCH_EILINE)(P, Z2_MIN_PIN))
#define MATCH_Z3_MAX_EILINE(P) TERN0(HAS_Z3_MAX, DEFER4(MATCH_EILINE)(P, Z3_MAX_PIN))
#define MATCH_Z3_MIN_EILINE(P) TERN0(HAS_Z3_MIN, DEFER4(MATCH_EILINE)(P, Z3_MIN_PIN))
#define MATCH_Z4_MAX_EILINE(P) TERN0(HAS_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
#define MATCH_Z4_MIN_EILINE(P) TERN0(HAS_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
#define MATCH_Z_MIN_PROBE_EILINE(P) TERN0(HAS_Z_MIN_PROBE_PIN, DEFER4(MATCH_EILINE)(P, Z_MIN_PROBE_PIN))
#define AVAILABLE_EILINE(P) ( PIN_TO_EILINE(P) != -1 \
@ -89,6 +93,8 @@
&& !MATCH_U_MAX_EILINE(P) && !MATCH_U_MIN_EILINE(P) \
&& !MATCH_V_MAX_EILINE(P) && !MATCH_V_MIN_EILINE(P) \
&& !MATCH_W_MAX_EILINE(P) && !MATCH_W_MIN_EILINE(P) \
&& !MATCH_X2_MAX_EILINE(P) && !MATCH_X2_MIN_EILINE(P) \
&& !MATCH_Y2_MAX_EILINE(P) && !MATCH_Y2_MIN_EILINE(P) \
&& !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P) \
&& !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P) \
&& !MATCH_Z4_MAX_EILINE(P) && !MATCH_Z4_MIN_EILINE(P) \
@ -101,151 +107,151 @@ void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(P, endstop_ISR, CHANGE)
#if HAS_X_MAX
#if !AVAILABLE_EILINE(X_MAX_PIN)
#error "X_MAX_PIN has no EXTINT line available."
#error "X_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
#if !AVAILABLE_EILINE(X_MIN_PIN)
#error "X_MIN_PIN has no EXTINT line available."
#error "X_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
#if !AVAILABLE_EILINE(Y_MAX_PIN)
#error "Y_MAX_PIN has no EXTINT line available."
#error "Y_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
#if !AVAILABLE_EILINE(Y_MIN_PIN)
#error "Y_MIN_PIN has no EXTINT line available."
#error "Y_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
#if !AVAILABLE_EILINE(Z_MAX_PIN)
#error "Z_MAX_PIN has no EXTINT line available."
#error "Z_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
#if HAS_Z_MIN_PIN
#if !AVAILABLE_EILINE(Z_MIN_PIN)
#error "Z_MIN_PIN has no EXTINT line available."
#error "Z_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_Z2_MAX
#if !AVAILABLE_EILINE(Z2_MAX_PIN)
#error "Z2_MAX_PIN has no EXTINT line available."
#error "Z2_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
#if !AVAILABLE_EILINE(Z2_MIN_PIN)
#error "Z2_MIN_PIN has no EXTINT line available."
#error "Z2_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z3_MAX
#if !AVAILABLE_EILINE(Z3_MAX_PIN)
#error "Z3_MAX_PIN has no EXTINT line available."
#error "Z3_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z3_MAX_PIN);
#endif
#if HAS_Z3_MIN
#if !AVAILABLE_EILINE(Z3_MIN_PIN)
#error "Z3_MIN_PIN has no EXTINT line available."
#error "Z3_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z3_MIN_PIN);
#endif
#if HAS_Z4_MAX
#if !AVAILABLE_EILINE(Z4_MAX_PIN)
#error "Z4_MAX_PIN has no EXTINT line available."
#error "Z4_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z4_MAX_PIN);
#endif
#if HAS_Z4_MIN
#if !AVAILABLE_EILINE(Z4_MIN_PIN)
#error "Z4_MIN_PIN has no EXTINT line available."
#error "Z4_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z4_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
#if !AVAILABLE_EILINE(Z_MIN_PROBE_PIN)
#error "Z_MIN_PROBE_PIN has no EXTINT line available."
#error "Z_MIN_PROBE_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
_ATTACH(Z_MIN_PROBE_PIN);
#endif
#if HAS_I_MAX
#if !AVAILABLE_EILINE(I_MAX_PIN)
#error "I_MAX_PIN has no EXTINT line available."
#error "I_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(I_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_I_MIN
#if !AVAILABLE_EILINE(I_MIN_PIN)
#error "I_MIN_PIN has no EXTINT line available."
#error "I_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(I_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_J_MAX
#if !AVAILABLE_EILINE(J_MAX_PIN)
#error "J_MAX_PIN has no EXTINT line available."
#error "J_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(J_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_J_MIN
#if !AVAILABLE_EILINE(J_MIN_PIN)
#error "J_MIN_PIN has no EXTINT line available."
#error "J_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(J_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_K_MAX
#if !AVAILABLE_EILINE(K_MAX_PIN)
#error "K_MAX_PIN has no EXTINT line available."
#error "K_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(K_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_K_MIN
#if !AVAILABLE_EILINE(K_MIN_PIN)
#error "K_MIN_PIN has no EXTINT line available."
#error "K_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(K_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_U_MAX
#if !AVAILABLE_EILINE(U_MAX_PIN)
#error "U_MAX_PIN has no EXTINT line available."
#error "U_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(U_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_U_MIN
#if !AVAILABLE_EILINE(U_MIN_PIN)
#error "U_MIN_PIN has no EXTINT line available."
#error "U_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(U_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_V_MAX
#if !AVAILABLE_EILINE(V_MAX_PIN)
#error "V_MAX_PIN has no EXTINT line available."
#error "V_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(V_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_V_MIN
#if !AVAILABLE_EILINE(V_MIN_PIN)
#error "V_MIN_PIN has no EXTINT line available."
#error "V_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(V_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_W_MAX
#if !AVAILABLE_EILINE(W_MAX_PIN)
#error "W_MAX_PIN has no EXTINT line available."
#error "W_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(W_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_W_MIN
#if !AVAILABLE_EILINE(W_MIN_PIN)
#error "W_MIN_PIN has no EXTINT line available."
#error "W_MIN_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
attachInterrupt(W_MIN_PIN, endstop_ISR, CHANGE);
#endif

56
Marlin/src/HAL/STM32/endstop_interrupts.h
View file

@ -29,33 +29,33 @@ void endstop_ISR() { endstops.update(); }
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(P, endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN_PIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
}

56
Marlin/src/HAL/STM32F1/endstop_interrupts.h
View file

@ -54,33 +54,33 @@ void endstop_ISR() { endstops.update(); }
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(P, endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN_PIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
}

56
Marlin/src/HAL/TEENSY31_32/endstop_interrupts.h
View file

@ -47,33 +47,33 @@ void endstop_ISR() { endstops.update(); }
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN_PIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
}

56
Marlin/src/HAL/TEENSY35_36/endstop_interrupts.h
View file

@ -46,33 +46,33 @@ void endstop_ISR() { endstops.update(); }
*/
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN_PIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
}

50
Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h
View file

@ -46,27 +46,33 @@ void endstop_ISR() { endstops.update(); }
*/
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN_PIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
}

45
Marlin/src/core/macros.h
View file

@ -33,51 +33,6 @@
#define _AXIS(A) (A##_AXIS)
#define _XSTOP_ 0x01
#define _YSTOP_ 0x02
#define _ZSTOP_ 0x03
#define _ISTOP_ 0x04
#define _JSTOP_ 0x05
#define _KSTOP_ 0x06
#define _USTOP_ 0x07
#define _VSTOP_ 0x08
#define _WSTOP_ 0x09
#define _XMIN_ 0x11
#define _YMIN_ 0x12
#define _ZMIN_ 0x13
#define _IMIN_ 0x14
#define _JMIN_ 0x15
#define _KMIN_ 0x16
#define _UMIN_ 0x17
#define _VMIN_ 0x18
#define _WMIN_ 0x19
#define _XMAX_ 0x21
#define _YMAX_ 0x22
#define _ZMAX_ 0x23
#define _IMAX_ 0x24
#define _JMAX_ 0x25
#define _KMAX_ 0x26
#define _UMAX_ 0x27
#define _VMAX_ 0x28
#define _WMAX_ 0x29
#define _XDIAG_ 0x31
#define _YDIAG_ 0x32
#define _ZDIAG_ 0x33
#define _IDIAG_ 0x34
#define _JDIAG_ 0x35
#define _KDIAG_ 0x36
#define _UDIAG_ 0x37
#define _VDIAG_ 0x38
#define _WDIAG_ 0x39
#define _E0DIAG_ 0xE0
#define _E1DIAG_ 0xE1
#define _E2DIAG_ 0xE2
#define _E3DIAG_ 0xE3
#define _E4DIAG_ 0xE4
#define _E5DIAG_ 0xE5
#define _E6DIAG_ 0xE6
#define _E7DIAG_ 0xE7
#define _FORCE_INLINE_ __attribute__((__always_inline__)) __inline__
#define FORCE_INLINE __attribute__((always_inline)) inline
#define NO_INLINE __attribute__((noinline))

16
Marlin/src/inc/Changes.h
View file

@ -65,7 +65,7 @@
#elif defined(ENDSTOPPULLUP_FIL_RUNOUT)
#error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULLUP."
#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
#error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
#error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Endstops are automatically determined."
#elif defined(LANGUAGE_INCLUDE)
#error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE."
#elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
@ -645,6 +645,20 @@
#error "TFT_SHARED_SPI is now TFT_SHARED_IO."
#elif defined(LCD_PINS_ENABLE)
#error "LCD_PINS_ENABLE is now LCD_PINS_EN."
#elif ANY(USE_XMIN_PLUG, USE_XMAX_PLUG, USE_YMIN_PLUG, USE_YMAX_PLUG, USE_ZMIN_PLUG, USE_ZMAX_PLUG, \
USE_IMIN_PLUG, USE_IMAX_PLUG, USE_JMIN_PLUG, USE_JMAX_PLUG, USE_KMIN_PLUG, USE_KMAX_PLUG, \
USE_UMIN_PLUG, USE_UMAX_PLUG, USE_VMIN_PLUG, USE_VMAX_PLUG, USE_WMIN_PLUG, USE_WMAX_PLUG)
#error "USE_*_PLUG settings are no longer needed and should be removed."
#elif defined(X2_USE_ENDSTOP)
#error "X2_USE_ENDSTOP is obsolete. Instead set X2_STOP_PIN directly. (e.g., 'X2_USE_ENDSTOP _XMAX_' becomes 'X2_STOP_PIN X_MAX_PIN')"
#elif defined(Y2_USE_ENDSTOP)
#error "Y2_USE_ENDSTOP is obsolete. Instead set Y2_STOP_PIN directly. (e.g., 'Y2_USE_ENDSTOP _YMAX_' becomes 'Y2_STOP_PIN Y_MAX_PIN')"
#elif defined(Z2_USE_ENDSTOP)
#error "Z2_USE_ENDSTOP is obsolete. Instead set Z2_STOP_PIN directly. (e.g., 'Z2_USE_ENDSTOP _ZMAX_' becomes 'Z2_STOP_PIN Z_MAX_PIN')"
#elif defined(Z2_USE_ENDSTOP)
#error "Z2_USE_ENDSTOP is obsolete. Instead set Z2_STOP_PIN directly. (e.g., 'Z2_USE_ENDSTOP _ZMAX_' becomes 'Z2_STOP_PIN Z_MAX_PIN')"
#elif defined(Z4_USE_ENDSTOP)
#error "Z4_USE_ENDSTOP is obsolete. Instead set Z4_STOP_PIN directly. (e.g., 'Z4_USE_ENDSTOP _ZMAX_' becomes 'Z4_STOP_PIN Z_MAX_PIN')"
#endif
// L64xx stepper drivers have been removed

404
Marlin/src/inc/Conditionals_post.h
View file

@ -737,17 +737,17 @@
#if ENABLED(X_DUAL_ENDSTOPS)
#if X_HOME_TO_MAX
#ifndef X2_MAX_ENDSTOP_HIT_STATE
#if X2_USE_ENDSTOP == _XMIN_
#if X2_STOP_PIN == X_MIN_PIN
#define X2_MAX_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _XMAX_
#elif X2_STOP_PIN == X_MAX_PIN
#define X2_MAX_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _YMIN_
#elif X2_STOP_PIN == Y_MIN_PIN
#define X2_MAX_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _YMAX_
#elif X2_STOP_PIN == Y_MAX_PIN
#define X2_MAX_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _ZMIN_
#elif X2_STOP_PIN == Z_MIN_PIN
#define X2_MAX_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _ZMAX_
#elif X2_STOP_PIN == Z_MAX_PIN
#define X2_MAX_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -759,17 +759,17 @@
#endif
#else
#ifndef X2_MIN_ENDSTOP_HIT_STATE
#if X2_USE_ENDSTOP == _XMIN_
#if X2_STOP_PIN == X_MIN_PIN
#define X2_MIN_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _XMAX_
#elif X2_STOP_PIN == X_MAX_PIN
#define X2_MIN_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _YMIN_
#elif X2_STOP_PIN == Y_MIN_PIN
#define X2_MIN_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _YMAX_
#elif X2_STOP_PIN == Y_MAX_PIN
#define X2_MIN_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _ZMIN_
#elif X2_STOP_PIN == Z_MIN_PIN
#define X2_MIN_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif X2_USE_ENDSTOP == _ZMAX_
#elif X2_STOP_PIN == Z_MAX_PIN
#define X2_MIN_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -794,17 +794,17 @@
#if ENABLED(Y_DUAL_ENDSTOPS)
#if Y_HOME_TO_MAX
#ifndef Y2_MAX_ENDSTOP_HIT_STATE
#if Y2_USE_ENDSTOP == _XMIN_
#if Y2_STOP_PIN == X_MIN_PIN
#define Y2_MAX_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _XMAX_
#elif Y2_STOP_PIN == X_MAX_PIN
#define Y2_MAX_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _YMIN_
#elif Y2_STOP_PIN == Y_MIN_PIN
#define Y2_MAX_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _YMAX_
#elif Y2_STOP_PIN == Y_MAX_PIN
#define Y2_MAX_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _ZMIN_
#elif Y2_STOP_PIN == Z_MIN_PIN
#define Y2_MAX_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _ZMAX_
#elif Y2_STOP_PIN == Z_MAX_PIN
#define Y2_MAX_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -816,17 +816,17 @@
#endif
#else
#ifndef Y2_MIN_ENDSTOP_HIT_STATE
#if Y2_USE_ENDSTOP == _XMIN_
#if Y2_STOP_PIN == X_MIN_PIN
#define Y2_MIN_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _XMAX_
#elif Y2_STOP_PIN == X_MAX_PIN
#define Y2_MIN_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _YMIN_
#elif Y2_STOP_PIN == Y_MIN_PIN
#define Y2_MIN_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _YMAX_
#elif Y2_STOP_PIN == Y_MAX_PIN
#define Y2_MIN_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _ZMIN_
#elif Y2_STOP_PIN == Z_MIN_PIN
#define Y2_MIN_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif Y2_USE_ENDSTOP == _ZMAX_
#elif Y2_STOP_PIN == Z_MAX_PIN
#define Y2_MIN_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -852,17 +852,17 @@
#if Z_HOME_TO_MAX
#ifndef Z2_MAX_ENDSTOP_HIT_STATE
#if Z2_USE_ENDSTOP == _XMIN_
#if Z2_STOP_PIN == X_MIN_PIN
#define Z2_MAX_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _XMAX_
#elif Z2_STOP_PIN == X_MAX_PIN
#define Z2_MAX_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _YMIN_
#elif Z2_STOP_PIN == Y_MIN_PIN
#define Z2_MAX_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _YMAX_
#elif Z2_STOP_PIN == Y_MAX_PIN
#define Z2_MAX_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _ZMIN_
#elif Z2_STOP_PIN == Z_MIN_PIN
#define Z2_MAX_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _ZMAX_
#elif Z2_STOP_PIN == Z_MAX_PIN
#define Z2_MAX_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -874,17 +874,17 @@
#endif
#else
#ifndef Z2_MIN_ENDSTOP_HIT_STATE
#if Z2_USE_ENDSTOP == _XMIN_
#if Z2_STOP_PIN == X_MIN_PIN
#define Z2_MIN_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _XMAX_
#elif Z2_STOP_PIN == X_MAX_PIN
#define Z2_MIN_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _YMIN_
#elif Z2_STOP_PIN == Y_MIN_PIN
#define Z2_MIN_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _YMAX_
#elif Z2_STOP_PIN == Y_MAX_PIN
#define Z2_MIN_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _ZMIN_
#elif Z2_STOP_PIN == Z_MIN_PIN
#define Z2_MIN_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif Z2_USE_ENDSTOP == _ZMAX_
#elif Z2_STOP_PIN == Z_MAX_PIN
#define Z2_MIN_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -905,17 +905,17 @@
#if NUM_Z_STEPPERS >= 3
#if Z_HOME_TO_MAX
#ifndef Z3_MAX_ENDSTOP_HIT_STATE
#if Z3_USE_ENDSTOP == _XMIN_
#if Z3_STOP_PIN == X_MIN_PIN
#define Z3_MAX_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _XMAX_
#elif Z3_STOP_PIN == X_MAX_PIN
#define Z3_MAX_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _YMIN_
#elif Z3_STOP_PIN == Y_MIN_PIN
#define Z3_MAX_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _YMAX_
#elif Z3_STOP_PIN == Y_MAX_PIN
#define Z3_MAX_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _ZMIN_
#elif Z3_STOP_PIN == Z_MIN_PIN
#define Z3_MAX_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _ZMAX_
#elif Z3_STOP_PIN == Z_MAX_PIN
#define Z3_MAX_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -927,17 +927,17 @@
#endif
#else
#ifndef Z3_MIN_ENDSTOP_HIT_STATE
#if Z3_USE_ENDSTOP == _XMIN_
#if Z3_STOP_PIN == X_MIN_PIN
#define Z3_MIN_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _XMAX_
#elif Z3_STOP_PIN == X_MAX_PIN
#define Z3_MIN_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _YMIN_
#elif Z3_STOP_PIN == Y_MIN_PIN
#define Z3_MIN_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _YMAX_
#elif Z3_STOP_PIN == Y_MAX_PIN
#define Z3_MIN_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _ZMIN_
#elif Z3_STOP_PIN == Z_MIN_PIN
#define Z3_MIN_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif Z3_USE_ENDSTOP == _ZMAX_
#elif Z3_STOP_PIN == Z_MAX_PIN
#define Z3_MIN_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -959,17 +959,17 @@
#if NUM_Z_STEPPERS >= 4
#if Z_HOME_TO_MAX
#ifndef Z4_MAX_ENDSTOP_HIT_STATE
#if Z4_USE_ENDSTOP == _XMIN_
#if Z4_STOP_PIN == X_MIN_PIN
#define Z4_MAX_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _XMAX_
#elif Z4_STOP_PIN == X_MAX_PIN
#define Z4_MAX_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _YMIN_
#elif Z4_STOP_PIN == Y_MIN_PIN
#define Z4_MAX_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _YMAX_
#elif Z4_STOP_PIN == Y_MAX_PIN
#define Z4_MAX_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _ZMIN_
#elif Z4_STOP_PIN == Z_MIN_PIN
#define Z4_MAX_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _ZMAX_
#elif Z4_STOP_PIN == Z_MAX_PIN
#define Z4_MAX_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -981,17 +981,17 @@
#endif
#else
#ifndef Z4_MIN_ENDSTOP_HIT_STATE
#if Z4_USE_ENDSTOP == _XMIN_
#if Z4_STOP_PIN == X_MIN_PIN
#define Z4_MIN_ENDSTOP_HIT_STATE X_MIN_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _XMAX_
#elif Z4_STOP_PIN == X_MAX_PIN
#define Z4_MIN_ENDSTOP_HIT_STATE X_MAX_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _YMIN_
#elif Z4_STOP_PIN == Y_MIN_PIN
#define Z4_MIN_ENDSTOP_HIT_STATE Y_MIN_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _YMAX_
#elif Z4_STOP_PIN == Y_MAX_PIN
#define Z4_MIN_ENDSTOP_HIT_STATE Y_MAX_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _ZMIN_
#elif Z4_STOP_PIN == Z_MIN_PIN
#define Z4_MIN_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
#elif Z4_USE_ENDSTOP == _ZMAX_
#elif Z4_STOP_PIN == Z_MAX_PIN
#define Z4_MIN_ENDSTOP_HIT_STATE Z_MAX_ENDSTOP_HIT_STATE
#endif
#endif
@ -1016,58 +1016,58 @@
* Set ENDSTOPPULLUPS for active endstop switches
*/
#if ENABLED(ENDSTOPPULLUPS)
#if ENABLED(USE_XMAX_PLUG)
#if HAS_X_MAX
#define ENDSTOPPULLUP_XMAX
#endif
#if ENABLED(USE_YMAX_PLUG)
#if HAS_Y_MAX
#define ENDSTOPPULLUP_YMAX
#endif
#if ENABLED(USE_ZMAX_PLUG)
#if HAS_Z_MAX
#define ENDSTOPPULLUP_ZMAX
#endif
#if ENABLED(USE_IMAX_PLUG)
#if HAS_I_MAX
#define ENDSTOPPULLUP_IMAX
#endif
#if ENABLED(USE_JMAX_PLUG)
#if HAS_J_MAX
#define ENDSTOPPULLUP_JMAX
#endif
#if ENABLED(USE_KMAX_PLUG)
#if HAS_K_MAX
#define ENDSTOPPULLUP_KMAX
#endif
#if ENABLED(USE_UMAX_PLUG)
#if HAS_U_MAX
#define ENDSTOPPULLUP_UMAX
#endif
#if ENABLED(USE_VMAX_PLUG)
#if HAS_V_MAX
#define ENDSTOPPULLUP_VMAX
#endif
#if ENABLED(USE_WMAX_PLUG)
#if HAS_W_MAX
#define ENDSTOPPULLUP_WMAX
#endif
#if ENABLED(USE_XMIN_PLUG)
#if HAS_X_MIN
#define ENDSTOPPULLUP_XMIN
#endif
#if ENABLED(USE_YMIN_PLUG)
#if HAS_Y_MIN
#define ENDSTOPPULLUP_YMIN
#endif
#if ENABLED(USE_ZMIN_PLUG)
#if HAS_Z_MIN_PIN
#define ENDSTOPPULLUP_ZMIN
#endif
#if ENABLED(USE_IMIN_PLUG)
#if HAS_I_MIN
#define ENDSTOPPULLUP_IMIN
#endif
#if ENABLED(USE_JMIN_PLUG)
#if HAS_J_MIN
#define ENDSTOPPULLUP_JMIN
#endif
#if ENABLED(USE_KMIN_PLUG)
#if HAS_K_MIN
#define ENDSTOPPULLUP_KMIN
#endif
#if ENABLED(USE_UMIN_PLUG)
#if HAS_U_MIN
#define ENDSTOPPULLUP_UMIN
#endif
#if ENABLED(USE_VMIN_PLUG)
#if HAS_V_MIN
#define ENDSTOPPULLUP_VMIN
#endif
#if ENABLED(USE_WMIN_PLUG)
#if HAS_W_MIN
#define ENDSTOPPULLUP_WMIN
#endif
#endif
@ -1076,58 +1076,58 @@
* Set ENDSTOPPULLDOWNS for active endstop switches
*/
#if ENABLED(ENDSTOPPULLDOWNS)
#if ENABLED(USE_XMAX_PLUG)
#if HAS_X_MAX
#define ENDSTOPPULLDOWN_XMAX
#endif
#if ENABLED(USE_YMAX_PLUG)
#if HAS_Y_MAX
#define ENDSTOPPULLDOWN_YMAX
#endif
#if ENABLED(USE_ZMAX_PLUG)
#if HAS_Z_MAX
#define ENDSTOPPULLDOWN_ZMAX
#endif
#if ENABLED(USE_IMAX_PLUG)
#if HAS_I_MAX
#define ENDSTOPPULLDOWN_IMAX
#endif
#if ENABLED(USE_JMAX_PLUG)
#if HAS_J_MAX
#define ENDSTOPPULLDOWN_JMAX
#endif
#if ENABLED(USE_KMAX_PLUG)
#if HAS_K_MAX
#define ENDSTOPPULLDOWN_KMAX
#endif
#if ENABLED(USE_UMAX_PLUG)
#if HAS_U_MAX
#define ENDSTOPPULLDOWN_UMAX
#endif
#if ENABLED(USE_VMAX_PLUG)
#if HAS_V_MAX
#define ENDSTOPPULLDOWN_VMAX
#endif
#if ENABLED(USE_WMAX_PLUG)
#if HAS_W_MAX
#define ENDSTOPPULLDOWN_WMAX
#endif
#if ENABLED(USE_XMIN_PLUG)
#if HAS_X_MIN
#define ENDSTOPPULLDOWN_XMIN
#endif
#if ENABLED(USE_YMIN_PLUG)
#if HAS_Y_MIN
#define ENDSTOPPULLDOWN_YMIN
#endif
#if ENABLED(USE_ZMIN_PLUG)
#if HAS_Z_MIN_PIN
#define ENDSTOPPULLDOWN_ZMIN
#endif
#if ENABLED(USE_IMIN_PLUG)
#if HAS_I_MIN
#define ENDSTOPPULLDOWN_IMIN
#endif
#if ENABLED(USE_JMIN_PLUG)
#if HAS_J_MIN
#define ENDSTOPPULLDOWN_JMIN
#endif
#if ENABLED(USE_KMIN_PLUG)
#if HAS_K_MIN
#define ENDSTOPPULLDOWN_KMIN
#endif
#if ENABLED(USE_UMIN_PLUG)
#if HAS_U_MIN
#define ENDSTOPPULLDOWN_UMIN
#endif
#if ENABLED(USE_VMIN_PLUG)
#if HAS_V_MIN
#define ENDSTOPPULLDOWN_VMIN
#endif
#if ENABLED(USE_WMIN_PLUG)
#if HAS_W_MIN
#define ENDSTOPPULLDOWN_WMIN
#endif
#endif
@ -2060,154 +2060,152 @@
// Endstops and bed probe
//
// Is an endstop plug used for extra Z endstops or the probe?
#define IS_PROBE_PIN(A,M) (USES_Z_MIN_PROBE_PIN && Z_MIN_PROBE_PIN == A##_##M##_PIN)
#define IS_X2_ENDSTOP(A,M) (ENABLED(X_DUAL_ENDSTOPS) && X2_USE_ENDSTOP == _##A##M##_)
#define IS_Y2_ENDSTOP(A,M) (ENABLED(Y_DUAL_ENDSTOPS) && Y2_USE_ENDSTOP == _##A##M##_)
#define IS_Z2_ENDSTOP(A,M) (ENABLED(Z_MULTI_ENDSTOPS) && Z2_USE_ENDSTOP == _##A##M##_)
#define IS_Z3_ENDSTOP(A,M) (ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPERS >= 3 && Z3_USE_ENDSTOP == _##A##M##_)
#define IS_Z4_ENDSTOP(A,M) (ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPERS >= 4 && Z4_USE_ENDSTOP == _##A##M##_)
#define _HAS_STOP(A,N,M,C) ((A##_HOME_TO_##M || (C+0)) && PIN_EXISTS(A##N##_##M))
#define _HAS_STOP(A,M) (HAS_##A##_AXIS && PIN_EXISTS(A##_##M) && !IS_PROBE_PIN(A,M) && !IS_X2_ENDSTOP(A,M) && !IS_Y2_ENDSTOP(A,M) && !IS_Z2_ENDSTOP(A,M) && !IS_Z3_ENDSTOP(A,M) && !IS_Z4_ENDSTOP(A,M))
#if _HAS_STOP(X,MIN)
#if _HAS_STOP(X,,MIN,)
#define HAS_X_MIN 1
#endif
#if _HAS_STOP(X,MAX)
#if _HAS_STOP(X,,MAX,ENABLED(DUAL_X_CARRIAGE))
#define HAS_X_MAX 1
#endif
#if _HAS_STOP(Y,MIN)
#define HAS_Y_MIN 1
#endif
#if _HAS_STOP(Y,MAX)
#define HAS_Y_MAX 1
#endif
#if _HAS_STOP(Z,MIN)
#define HAS_Z_MIN 1
#endif
#if _HAS_STOP(Z,MAX)
#define HAS_Z_MAX 1
#endif
#if _HAS_STOP(I,MIN)
#define HAS_I_MIN 1
#endif
#if _HAS_STOP(I,MAX)
#define HAS_I_MAX 1
#endif
#if _HAS_STOP(J,MIN)
#define HAS_J_MIN 1
#endif
#if _HAS_STOP(J,MAX)
#define HAS_J_MAX 1
#endif
#if _HAS_STOP(K,MIN)
#define HAS_K_MIN 1
#endif
#if _HAS_STOP(K,MAX)
#define HAS_K_MAX 1
#endif
#if _HAS_STOP(U,MIN)
#define HAS_U_MIN 1
#endif
#if _HAS_STOP(U,MAX)
#define HAS_U_MAX 1
#endif
#if _HAS_STOP(V,MIN)
#define HAS_V_MIN 1
#endif
#if _HAS_STOP(V,MAX)
#define HAS_V_MAX 1
#endif
#if _HAS_STOP(W,MIN)
#define HAS_W_MIN 1
#endif
#if _HAS_STOP(W,MAX)
#define HAS_W_MAX 1
#endif
#if PIN_EXISTS(X2_MIN)
#define HAS_X2_MIN 1
#endif
#if PIN_EXISTS(X2_MAX)
#define HAS_X2_MAX 1
#endif
#if PIN_EXISTS(Y2_MIN)
#define HAS_Y2_MIN 1
#endif
#if PIN_EXISTS(Y2_MAX)
#define HAS_Y2_MAX 1
#endif
#if PIN_EXISTS(Z2_MIN)
#define HAS_Z2_MIN 1
#endif
#if PIN_EXISTS(Z2_MAX)
#define HAS_Z2_MAX 1
#endif
#if PIN_EXISTS(Z3_MIN)
#define HAS_Z3_MIN 1
#endif
#if PIN_EXISTS(Z3_MAX)
#define HAS_Z3_MAX 1
#endif
#if PIN_EXISTS(Z4_MIN)
#define HAS_Z4_MIN 1
#endif
#if PIN_EXISTS(Z4_MAX)
#define HAS_Z4_MAX 1
#endif
#if HAS_X_MIN || HAS_X_MAX
#define HAS_X_ENDSTOP 1
#endif
#if HAS_X2_MIN || HAS_X2_MAX
#define HAS_X2_ENDSTOP 1
#if _HAS_STOP(Y,,MIN,)
#define HAS_Y_MIN 1
#elif _HAS_STOP(Y,,MAX,)
#define HAS_Y_MAX 1
#endif
#if HAS_Y_MIN || HAS_Y_MAX
#define HAS_Y_ENDSTOP 1
#endif
#if HAS_Y2_MIN || HAS_Y2_MAX
#define HAS_Y2_ENDSTOP 1
#if _HAS_STOP(Z,,MIN,EITHER(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, HAS_DELTA_SENSORLESS_PROBING))
#define HAS_Z_MIN 1
#if !HAS_DELTA_SENSORLESS_PROBING
#define HAS_Z_MIN_PIN 1
#endif
#endif
#if _HAS_STOP(Z,,MAX,)
#define HAS_Z_MAX 1
#endif
#if HAS_Z_MIN || HAS_Z_MAX
#define HAS_Z_ENDSTOP 1
#endif
#if HAS_Z2_MIN || HAS_Z2_MAX
#define HAS_Z2_ENDSTOP 1
#endif
#if HAS_Z3_MIN || HAS_Z3_MAX
#define HAS_Z3_ENDSTOP 1
#endif
#if HAS_Z4_MIN || HAS_Z4_MAX
#define HAS_Z4_ENDSTOP 1
#if _HAS_STOP(I,,MIN,)
#define HAS_I_MIN 1
#elif _HAS_STOP(I,,MAX,)
#define HAS_I_MAX 1
#endif
#if HAS_I_MIN || HAS_I_MAX
#define HAS_I_ENDSTOP 1
#endif
#if _HAS_STOP(J,,MIN,)
#define HAS_J_MIN 1
#elif _HAS_STOP(J,,MAX,)
#define HAS_J_MAX 1
#endif
#if HAS_J_MIN || HAS_J_MAX
#define HAS_J_ENDSTOP 1
#endif
#if _HAS_STOP(K,,MIN,)
#define HAS_K_MIN 1
#elif _HAS_STOP(K,,MAX,)
#define HAS_K_MAX 1
#endif
#if HAS_K_MIN || HAS_K_MAX
#define HAS_K_ENDSTOP 1
#endif
#if _HAS_STOP(U,,MIN,)
#define HAS_U_MIN 1
#elif _HAS_STOP(U,,MAX,)
#define HAS_U_MAX 1
#endif
#if HAS_U_MIN || HAS_U_MAX
#define HAS_U_ENDSTOP 1
#endif
#if _HAS_STOP(V,,MIN,)
#define HAS_V_MIN 1
#elif _HAS_STOP(V,,MAX,)
#define HAS_V_MAX 1
#endif
#if HAS_V_MIN || HAS_V_MAX
#define HAS_V_ENDSTOP 1
#endif
#if _HAS_STOP(W,,MIN,)
#define HAS_W_MIN 1
#elif _HAS_STOP(W,,MAX,)
#define HAS_W_MAX 1
#endif
#if HAS_W_MIN || HAS_W_MAX
#define HAS_W_ENDSTOP 1
#endif
#if EITHER(DUAL_X_CARRIAGE, X_DUAL_ENDSTOPS)
#if _HAS_STOP(X,2,MIN,)
#define HAS_X2_MIN 1
#elif _HAS_STOP(X,2,MAX,)
#define HAS_X2_MAX 1
#endif
#if HAS_X2_MIN || HAS_X2_MAX
#define HAS_X2_ENDSTOP 1
#endif
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
#if _HAS_STOP(Y,2,MIN,)
#define HAS_Y2_MIN 1
#elif _HAS_STOP(Y,2,MAX,)
#define HAS_Y2_MAX 1
#endif
#if HAS_Y2_MIN || HAS_Y2_MAX
#define HAS_Y2_ENDSTOP 1
#endif
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
#if _HAS_STOP(Z,2,MIN,)
#define HAS_Z2_MIN 1
#elif _HAS_STOP(Z,2,MAX,)
#define HAS_Z2_MAX 1
#endif
#if HAS_Z2_MIN || HAS_Z2_MAX
#define HAS_Z2_ENDSTOP 1
#endif
#if NUM_Z_STEPPERS >= 3
#if _HAS_STOP(Z,3,MIN,)
#define HAS_Z3_MIN 1
#elif _HAS_STOP(Z,3,MAX,)
#define HAS_Z3_MAX 1
#endif
#if HAS_Z3_MIN || HAS_Z3_MAX
#define HAS_Z3_ENDSTOP 1
#endif
#endif
#if NUM_Z_STEPPERS >= 4
#if _HAS_STOP(Z,4,MIN,)
#define HAS_Z4_MIN 1
#elif _HAS_STOP(Z,4,MAX,)
#define HAS_Z4_MAX 1
#endif
#if HAS_Z4_MIN || HAS_Z4_MAX
#define HAS_Z4_ENDSTOP 1
#endif
#endif
#endif
#if HAS_BED_PROBE && PIN_EXISTS(Z_MIN_PROBE)
#define HAS_Z_MIN_PROBE_PIN 1
#endif
#undef _HAS_STOP
#undef IS_PROBE_PIN
#undef IS_X2_ENDSTOP
#undef IS_Y2_ENDSTOP
#undef IS_Z2_ENDSTOP
#undef IS_Z3_ENDSTOP
#undef IS_Z4_ENDSTOP
//
// ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface)

146
Marlin/src/inc/SanityCheck.h
View file

@ -1379,9 +1379,7 @@ static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _L
#error "SENSORLESS_PROBING requires a TMC2130/2160/2209/5130/5160 driver on Z and Z_STALL_SENSITIVITY."
#endif
#elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#if DISABLED(USE_ZMIN_PLUG)
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
#elif !HAS_Z_MIN
#if !HAS_Z_MIN_PIN
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
#elif Z_MIN_PROBE_ENDSTOP_HIT_STATE != Z_MIN_ENDSTOP_HIT_STATE
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_HIT_STATE to match Z_MIN_PROBE_ENDSTOP_HIT_STATE."
@ -1772,7 +1770,7 @@ static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _L
#elif !GOOD_AXIS_PINS(X2)
#error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
#elif !HAS_X_MAX
#error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
#error "DUAL_X_CARRIAGE requires an X_MAX_PIN in addition to the X_MIN_PIN."
#elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
#error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
#elif X_HOME_TO_MAX || X2_HOME_TO_MIN
@ -2302,90 +2300,49 @@ static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _L
/**
* Endstop Tests
*/
#define _PLUG_UNUSED_TEST(A,P) (DISABLED(USE_##P##MIN_PLUG, USE_##P##MAX_PLUG) \
&& !(ENABLED(A##_DUAL_ENDSTOPS) && WITHIN(A##2_USE_ENDSTOP, _##P##MAX_, _##P##MIN_)) \
&& !(ENABLED(A##_MULTI_ENDSTOPS) && WITHIN(A##2_USE_ENDSTOP, _##P##MAX_, _##P##MIN_)) )
#define _AXIS_PLUG_UNUSED_TEST(A) (HAS_##A##_A NUM_AXIS_GANG(&& _PLUG_UNUSED_TEST(A,X), && _PLUG_UNUSED_TEST(A,Y), && _PLUG_UNUSED_TEST(A,Z), \
&& _PLUG_UNUSED_TEST(A,I), && _PLUG_UNUSED_TEST(A,J), && _PLUG_UNUSED_TEST(A,K), \
&& _PLUG_UNUSED_TEST(A,U), && _PLUG_UNUSED_TEST(A,V), && _PLUG_UNUSED_TEST(A,W) ) )
// A machine with endstops must have a minimum of 3
#if HAS_ENDSTOPS
#if _AXIS_PLUG_UNUSED_TEST(X)
#error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(Y)
#error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(Z)
#error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(I)
#error "You must enable USE_IMIN_PLUG or USE_IMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(J)
#error "You must enable USE_JMIN_PLUG or USE_JMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(K)
#error "You must enable USE_KMIN_PLUG or USE_KMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(U)
#error "You must enable USE_UMIN_PLUG or USE_UMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(V)
#error "You must enable USE_VMIN_PLUG or USE_VMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(W)
#error "You must enable USE_WMIN_PLUG or USE_WMAX_PLUG."
#endif
// Delta and Cartesian use 3 homing endstops
#if NONE(IS_SCARA, SPI_ENDSTOPS)
#if X_HOME_TO_MIN && DISABLED(USE_XMIN_PLUG)
#error "Enable USE_XMIN_PLUG when homing X to MIN."
#elif X_HOME_TO_MAX && DISABLED(USE_XMAX_PLUG)
#error "Enable USE_XMAX_PLUG when homing X to MAX."
#elif Y_HOME_TO_MIN && DISABLED(USE_YMIN_PLUG)
#error "Enable USE_YMIN_PLUG when homing Y to MIN."
#elif Y_HOME_TO_MAX && DISABLED(USE_YMAX_PLUG)
#error "Enable USE_YMAX_PLUG when homing Y to MAX."
#elif I_HOME_TO_MIN && DISABLED(USE_IMIN_PLUG)
#error "Enable USE_IMIN_PLUG when homing I to MIN."
#elif I_HOME_TO_MAX && DISABLED(USE_IMAX_PLUG)
#error "Enable USE_IMAX_PLUG when homing I to MAX."
#elif J_HOME_TO_MIN && DISABLED(USE_JMIN_PLUG)
#error "Enable USE_JMIN_PLUG when homing J to MIN."
#elif J_HOME_TO_MAX && DISABLED(USE_JMAX_PLUG)
#error "Enable USE_JMAX_PLUG when homing J to MAX."
#elif K_HOME_TO_MIN && DISABLED(USE_KMIN_PLUG)
#error "Enable USE_KMIN_PLUG when homing K to MIN."
#elif K_HOME_TO_MAX && DISABLED(USE_KMAX_PLUG)
#error "Enable USE_KMAX_PLUG when homing K to MAX."
#elif U_HOME_TO_MIN && DISABLED(USE_UMIN_PLUG)
#error "Enable USE_UMIN_PLUG when homing U to MIN."
#elif U_HOME_TO_MAX && DISABLED(USE_UMAX_PLUG)
#error "Enable USE_UMAX_PLUG when homing U to MAX."
#elif V_HOME_TO_MIN && DISABLED(USE_VMIN_PLUG)
#error "Enable USE_VMIN_PLUG when homing V to MIN."
#elif V_HOME_TO_MAX && DISABLED(USE_VMAX_PLUG)
#error "Enable USE_VMAX_PLUG when homing V to MAX."
#elif W_HOME_TO_MIN && DISABLED(USE_WMIN_PLUG)
#error "Enable USE_WMIN_PLUG when homing W to MIN."
#elif W_HOME_TO_MAX && DISABLED(USE_WMAX_PLUG)
#error "Enable USE_WMAX_PLUG when homing W to MAX."
#if X_HOME_TO_MIN && !PIN_EXISTS(X_MIN)
#error "X_MIN_PIN (or X_STOP_PIN) is required for X axis homing."
#elif X_HOME_TO_MAX && !PIN_EXISTS(X_MAX)
#error "X_MAX_PIN (or X_STOP_PIN) is required for X axis homing."
#elif Y_HOME_TO_MIN && !PIN_EXISTS(Y_MIN)
#error "Y_MIN_PIN (or Y_STOP_PIN) is required for Y axis homing."
#elif Y_HOME_TO_MAX && !PIN_EXISTS(Y_MAX)
#error "Y_MAX_PIN (or Y_STOP_PIN) is required for Y axis homing."
#elif I_HOME_TO_MIN && !PIN_EXISTS(I_MIN)
#error "I_MIN_PIN (or I_STOP_PIN) is required for I axis homing."
#elif I_HOME_TO_MAX && !PIN_EXISTS(I_MAX)
#error "I_MAX_PIN (or I_STOP_PIN) is required for I axis homing."
#elif J_HOME_TO_MIN && !PIN_EXISTS(J_MIN)
#error "J_MIN_PIN (or J_STOP_PIN) is required for J axis homing."
#elif J_HOME_TO_MAX && !PIN_EXISTS(J_MAX)
#error "J_MAX_PIN (or J_STOP_PIN) is required for J axis homing."
#elif K_HOME_TO_MIN && !PIN_EXISTS(K_MIN)
#error "K_MIN_PIN (or K_STOP_PIN) is required for K axis homing."
#elif K_HOME_TO_MAX && !PIN_EXISTS(K_MAX)
#error "K_MAX_PIN (or K_STOP_PIN) is required for K axis homing."
#elif U_HOME_TO_MIN && !PIN_EXISTS(U_MIN)
#error "U_MIN_PIN (or U_STOP_PIN) is required for U axis homing."
#elif U_HOME_TO_MAX && !PIN_EXISTS(U_MAX)
#error "U_MAX_PIN (or U_STOP_PIN) is required for U axis homing."
#elif V_HOME_TO_MIN && !PIN_EXISTS(V_MIN)
#error "V_MIN_PIN (or V_STOP_PIN) is required for V axis homing."
#elif V_HOME_TO_MAX && !PIN_EXISTS(V_MAX)
#error "V_MAX_PIN (or V_STOP_PIN) is required for V axis homing."
#elif W_HOME_TO_MIN && !PIN_EXISTS(W_MIN)
#error "W_MIN_PIN (or W_STOP_PIN) is required for W axis homing."
#elif W_HOME_TO_MAX && !PIN_EXISTS(W_MAX)
#error "W_MAX_PIN (or W_STOP_PIN) is required for W axis homing."
#endif
#endif
// Z homing direction and plug usage flags
#if Z_HOME_TO_MIN && NONE(USE_ZMIN_PLUG, HOMING_Z_WITH_PROBE)
#error "Enable USE_ZMIN_PLUG when homing Z to MIN."
#elif Z_HOME_TO_MAX && ENABLED(USE_PROBE_FOR_Z_HOMING)
// Z homing requirements
#if Z_HOME_TO_MAX && ENABLED(USE_PROBE_FOR_Z_HOMING)
#error "Z_HOME_DIR must be -1 when homing Z with the probe."
#elif BOTH(HOMING_Z_WITH_PROBE, Z_MULTI_ENDSTOPS)
#error "Z_MULTI_ENDSTOPS is incompatible with USE_PROBE_FOR_Z_HOMING."
#elif Z_HOME_TO_MAX && DISABLED(USE_ZMAX_PLUG)
#error "Enable USE_ZMAX_PLUG when homing Z to MAX."
#endif
#endif
@ -2397,26 +2354,26 @@ static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _L
#if ENABLED(X_DUAL_ENDSTOPS)
#if ENABLED(DELTA)
#error "X_DUAL_ENDSTOPS is not compatible with DELTA."
#elif !X2_USE_ENDSTOP
#error "X2_USE_ENDSTOP must be set with X_DUAL_ENDSTOPS."
#elif !HAS_X2_ENDSTOP
#error "X2 Endstop Pin must be defined for X_DUAL_ENDSTOPS."
#endif
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
#if ENABLED(DELTA)
#error "Y_DUAL_ENDSTOPS is not compatible with DELTA."
#elif !Y2_USE_ENDSTOP
#error "Y2_USE_ENDSTOP must be set with Y_DUAL_ENDSTOPS."
#elif !HAS_Y2_ENDSTOP
#error "Y2 Endstop Pin must be defined for Y_DUAL_ENDSTOPS."
#endif
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
#if ENABLED(DELTA)
#error "Z_MULTI_ENDSTOPS is not compatible with DELTA."
#elif !Z2_USE_ENDSTOP
#error "Z2_USE_ENDSTOP must be set with Z_MULTI_ENDSTOPS."
#elif !Z3_USE_ENDSTOP && NUM_Z_STEPPERS >= 3
#error "Z3_USE_ENDSTOP must be set with Z_MULTI_ENDSTOPS and Z3_DRIVER_TYPE."
#elif !Z4_USE_ENDSTOP && NUM_Z_STEPPERS >= 4
#error "Z4_USE_ENDSTOP must be set with Z_MULTI_ENDSTOPS and Z4_DRIVER_TYPE."
#elif !HAS_Z2_ENDSTOP
#error "Z2 Endstop Pin must be defined for Z_MULTI_ENDSTOPS."
#elif NUM_Z_STEPPERS >= 3 && !HAS_Z3_ENDSTOP
#error "Z3 Endstop Pin must be defined for Z_MULTI_ENDSTOPS and Z3_DRIVER_TYPE."
#elif NUM_Z_STEPPERS >= 4 && !HAS_Z4_ENDSTOP
#error "Z4 Endstop Pin must be defined for Z_MULTI_ENDSTOPS and Z4_DRIVER_TYPE."
#endif
#endif
@ -3310,10 +3267,12 @@ static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _L
* TMC SPI Chaining
*/
#define IN_CHAIN(A) A##_CHAIN_POS > 0
#if IN_CHAIN(X ) || IN_CHAIN(Y ) || IN_CHAIN(Z ) || IN_CHAIN(X2) || IN_CHAIN(Y2) || IN_CHAIN(Z2) || IN_CHAIN(Z3) || IN_CHAIN(Z4) \
#if IN_CHAIN(X) || IN_CHAIN(Y) || IN_CHAIN(Z) || IN_CHAIN(I) || IN_CHAIN(J) || IN_CHAIN(K) || IN_CHAIN(U) || IN_CHAIN(V) || IN_CHAIN(W) \
|| IN_CHAIN(X2) || IN_CHAIN(Y2) || IN_CHAIN(Z2) || IN_CHAIN(Z3) || IN_CHAIN(Z4) \
|| IN_CHAIN(E0) || IN_CHAIN(E1) || IN_CHAIN(E2) || IN_CHAIN(E3) || IN_CHAIN(E4) || IN_CHAIN(E5) || IN_CHAIN(E6) || IN_CHAIN(E7)
#define BAD_CHAIN(A) (IN_CHAIN(A) && !PIN_EXISTS(A##_CS))
#if BAD_CHAIN(X ) || BAD_CHAIN(Y ) || BAD_CHAIN(Z ) || BAD_CHAIN(X2) || BAD_CHAIN(Y2) || BAD_CHAIN(Z2) || BAD_CHAIN(Z3) || BAD_CHAIN(Z4) \
#if BAD_CHAIN(X) || BAD_CHAIN(Y) || BAD_CHAIN(Z) || BAD_CHAIN(I) || BAD_CHAIN(J) || BAD_CHAIN(K) || BAD_CHAIN(U) || BAD_CHAIN(V) || BAD_CHAIN(W) \
|| BAD_CHAIN(X2) || BAD_CHAIN(Y2) || BAD_CHAIN(Z2) || BAD_CHAIN(Z3) || BAD_CHAIN(Z4) \
|| BAD_CHAIN(E0) || BAD_CHAIN(E1) || BAD_CHAIN(E2) || BAD_CHAIN(E3) || BAD_CHAIN(E4) || BAD_CHAIN(E5) || BAD_CHAIN(E6) || BAD_CHAIN(E7)
#error "All chained TMC drivers need a CS pin."
#else
@ -3361,9 +3320,8 @@ static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _L
#define CS_COMPARE E7_CS_PIN
#endif
#define BAD_CS_PIN(A) (IN_CHAIN(A) && A##_CS_PIN != CS_COMPARE)
#if BAD_CS_PIN(X ) || BAD_CS_PIN(Y ) || BAD_CS_PIN(Z ) || BAD_CS_PIN(X2) || BAD_CS_PIN(Y2) || BAD_CS_PIN(Z2) || BAD_CS_PIN(Z3) || BAD_CS_PIN(Z4) \
|| BAD_CS_PIN(I) || BAD_CS_PIN(J) || BAD_CS_PIN(K) \
|| BAD_CS_PIN(U) || BAD_CS_PIN(V) || BAD_CS_PIN(W) \
#if BAD_CS_PIN(X) || BAD_CS_PIN(Y) || BAD_CS_PIN(Z) || BAD_CS_PIN(I) || BAD_CS_PIN(J) || BAD_CS_PIN(K) || BAD_CS_PIN(U) || BAD_CS_PIN(V) || BAD_CS_PIN(W) \
|| BAD_CS_PIN(X2) || BAD_CS_PIN(Y2) || BAD_CS_PIN(Z2) || BAD_CS_PIN(Z3) || BAD_CS_PIN(Z4) \
|| BAD_CS_PIN(E0) || BAD_CS_PIN(E1) || BAD_CS_PIN(E2) || BAD_CS_PIN(E3) || BAD_CS_PIN(E4) || BAD_CS_PIN(E5) || BAD_CS_PIN(E6) || BAD_CS_PIN(E7)
#error "All chained TMC drivers must use the same CS pin."
#endif

778
Marlin/src/inc/Warnings.cpp
View file

@ -95,46 +95,40 @@
#warning "Note: Auto-assigned X2_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_X2_DIAG
#if X2_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned X2_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned X2_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _XSTOP_
#warning "Note: Auto-assigned X2_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned X2_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned X2_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _YSTOP_
#warning "Note: Auto-assigned X2_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned X2_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned X2_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _ZSTOP_
#warning "Note: Auto-assigned X2_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned X2_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if X2_STOP_PIN == X_MIN_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == X_STOP_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == Y_MIN_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == Y_STOP_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == Z_MIN_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == Z_STOP_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif X2_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned X2 sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_Y2_STEPPER
@ -153,46 +147,40 @@
#warning "Note: Auto-assigned Y2_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_Y2_DIAG
#if Y2_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned Y2_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned Y2_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _XSTOP_
#warning "Note: Auto-assigned Y2_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned Y2_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned Y2_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _YSTOP_
#warning "Note: Auto-assigned Y2_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned Y2_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned Y2_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _ZSTOP_
#warning "Note: Auto-assigned Y2_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned Y2_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if Y2_USE_ENDSTOP == X_MIN_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == X_STOP_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == Y_MIN_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == Y_STOP_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_USE_ENDSTOP == Z_MIN_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == Z_STOP_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Y2_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned Y2 sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_Z2_STEPPER
@ -211,46 +199,40 @@
#warning "Note: Auto-assigned Z2_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_Z2_DIAG
#if Z2_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned Z2_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned Z2_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _XSTOP_
#warning "Note: Auto-assigned Z2_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned Z2_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned Z2_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _YSTOP_
#warning "Note: Auto-assigned Z2_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned Z2_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned Z2_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _ZSTOP_
#warning "Note: Auto-assigned Z2_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned Z2_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if Z2_USE_ENDSTOP == X_MIN_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == X_STOP_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == Y_MIN_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == Y_STOP_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_USE_ENDSTOP == Z_MIN_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == Z_STOP_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z2_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned Z2 sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_Z3_STEPPER
@ -269,46 +251,40 @@
#warning "Note: Auto-assigned Z3_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_Z3_DIAG
#if Z3_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned Z3_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned Z3_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _XSTOP_
#warning "Note: Auto-assigned Z3_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned Z3_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned Z3_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _YSTOP_
#warning "Note: Auto-assigned Z3_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned Z3_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned Z3_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _ZSTOP_
#warning "Note: Auto-assigned Z3_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned Z3_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if Z3_USE_ENDSTOP == X_MIN_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == X_STOP_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == Y_MIN_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == Y_STOP_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_USE_ENDSTOP == Z_MIN_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == Z_STOP_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z3_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned Z3 sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_Z4_STEPPER
@ -327,46 +303,40 @@
#warning "Note: Auto-assigned Z4_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_Z4_DIAG
#if Z4_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned Z4_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned Z4_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _XSTOP_
#warning "Note: Auto-assigned Z4_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned Z4_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned Z4_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _YSTOP_
#warning "Note: Auto-assigned Z4_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned Z4_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned Z4_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _ZSTOP_
#warning "Note: Auto-assigned Z4_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned Z4_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if Z4_USE_ENDSTOP == X_MIN_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == X_STOP_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == Y_MIN_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == Y_STOP_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_USE_ENDSTOP == Z_MIN_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == Z_STOP_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif Z4_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned Z4 sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_I_STEPPER
@ -385,46 +355,40 @@
#warning "Note: Auto-assigned I_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_I_DIAG
#if I_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned I_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned I_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _XSTOP_
#warning "Note: Auto-assigned I_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned I_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned I_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _YSTOP_
#warning "Note: Auto-assigned I_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned I_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned I_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _ZSTOP_
#warning "Note: Auto-assigned I_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned I_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if I_STOP_PIN == X_MIN_PIN
#warning "Note: Auto-assigned I sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned I sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == X_STOP_PIN
#warning "Note: Auto-assigned I sensorless endstop to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == Y_MIN_PIN
#warning "Note: Auto-assigned I sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned I sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == Y_STOP_PIN
#warning "Note: Auto-assigned I sensorless endstop to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == Z_MIN_PIN
#warning "Note: Auto-assigned I sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned I sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == Z_STOP_PIN
#warning "Note: Auto-assigned I sensorless endstop to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned I sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned I sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned I sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned I sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned I sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned I sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned I sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif I_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned I sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_J_STEPPER
@ -443,46 +407,40 @@
#warning "Note: Auto-assigned J_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_J_DIAG
#if J_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned J_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned J_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _XSTOP_
#warning "Note: Auto-assigned J_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned J_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned J_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _YSTOP_
#warning "Note: Auto-assigned J_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned J_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned J_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _ZSTOP_
#warning "Note: Auto-assigned J_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned J_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if J_STOP_PIN == X_MIN_PIN
#warning "Note: Auto-assigned J sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned J sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == X_STOP_PIN
#warning "Note: Auto-assigned J sensorless endstop to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == Y_MIN_PIN
#warning "Note: Auto-assigned J sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned J sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == Y_STOP_PIN
#warning "Note: Auto-assigned J sensorless endstop to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == Z_MIN_PIN
#warning "Note: Auto-assigned J sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned J sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == Z_STOP_PIN
#warning "Note: Auto-assigned J sensorless endstop to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned J sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned J sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned J sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned J sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned J sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned J sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned J sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif J_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned J sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_K_STEPPER
@ -501,46 +459,40 @@
#warning "Note: Auto-assigned K_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_K_DIAG
#if K_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned K_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned K_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _XSTOP_
#warning "Note: Auto-assigned K_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned K_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned K_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _YSTOP_
#warning "Note: Auto-assigned K_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned K_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned K_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _ZSTOP_
#warning "Note: Auto-assigned K_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned K_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if K_STOP_PIN == X_MIN_PIN
#warning "Note: Auto-assigned K sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned K sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == X_STOP_PIN
#warning "Note: Auto-assigned K sensorless endstop to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == Y_MIN_PIN
#warning "Note: Auto-assigned K sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned K sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == Y_STOP_PIN
#warning "Note: Auto-assigned K sensorless endstop to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == Z_MIN_PIN
#warning "Note: Auto-assigned K sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned K sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == Z_STOP_PIN
#warning "Note: Auto-assigned K sensorless endstop to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned K sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned K sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned K sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned K sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned K sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned K sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned K sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned K sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
@ -560,40 +512,34 @@
#warning "Note: Auto-assigned U_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_U_DIAG
#if U_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned U_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned U_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned U_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned U_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned U_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned U_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned U_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if U_STOP_PIN == X_MIN_PIN
#warning "Note: Auto-assigned U sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned U sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif K_STOP_PIN == Y_MIN_PIN
#warning "Note: Auto-assigned U sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned U sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == Z_MIN_PIN
#warning "Note: Auto-assigned U sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned U sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned U sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned U sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned U sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned U sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned U sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned U sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned U sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif U_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned U sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_V_STEPPER
@ -612,40 +558,34 @@
#warning "Note: Auto-assigned V_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_V_DIAG
#if V_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned V_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned V_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned V_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned V_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned V_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned V_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned V_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if V_STOP_PIN == X_MIN_PIN
#warning "Note: Auto-assigned V sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned V sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == Y_MIN_PIN
#warning "Note: Auto-assigned V sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned V sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == Z_MIN_PIN
#warning "Note: Auto-assigned V sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned V sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned V sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned V sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned V sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned V sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned V sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned V sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned V sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif V_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned V sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif
#if AUTO_ASSIGNED_W_STEPPER
@ -664,40 +604,34 @@
#warning "Note: Auto-assigned W_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#if AUTO_ASSIGNED_W_DIAG
#if W_USE_ENDSTOP == _XMIN_
#warning "Note: Auto-assigned W_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _XMAX_
#warning "Note: Auto-assigned W_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _YMIN_
#warning "Note: Auto-assigned W_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _YMAX_
#warning "Note: Auto-assigned W_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _ZMIN_
#warning "Note: Auto-assigned W_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _ZMAX_
#warning "Note: Auto-assigned W_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _XDIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _YDIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _ZDIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _E0DIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _E1DIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _E2DIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _E3DIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _E4DIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _E5DIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _E6DIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_USE_ENDSTOP == _E7DIAG_
#warning "Note: Auto-assigned W_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#if W_STOP_PIN == X_MIN_PIN
#warning "Note: Auto-assigned W sensorless endstop to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == X_MAX_PIN
#warning "Note: Auto-assigned W sensorless endstop to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == Y_MIN_PIN
#warning "Note: Auto-assigned W sensorless endstop to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == Y_MAX_PIN
#warning "Note: Auto-assigned W sensorless endstop to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == Z_MIN_PIN
#warning "Note: Auto-assigned W sensorless endstop to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == Z_MAX_PIN
#warning "Note: Auto-assigned W sensorless endstop to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == E0_DIAG_PIN
#warning "Note: Auto-assigned W sensorless endstop to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == E1_DIAG_PIN
#warning "Note: Auto-assigned W sensorless endstop to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == E2_DIAG_PIN
#warning "Note: Auto-assigned W sensorless endstop to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == E3_DIAG_PIN
#warning "Note: Auto-assigned W sensorless endstop to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == E4_DIAG_PIN
#warning "Note: Auto-assigned W sensorless endstop to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == E5_DIAG_PIN
#warning "Note: Auto-assigned W sensorless endstop to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == E6_DIAG_PIN
#warning "Note: Auto-assigned W sensorless endstop to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#elif W_STOP_PIN == E7_DIAG_PIN
#warning "Note: Auto-assigned W sensorless endstop to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
#endif
#endif

12
Marlin/src/lcd/e3v2/proui/endstop_diag.cpp
View file

@ -72,9 +72,9 @@ void ESDiagClass::Draw() {
DWINUI::Draw_Button(BTN_Continue, 86, 250);
DWINUI::cursor.y = 80;
#define ES_LABEL(S) draw_es_label(F(STR_##S))
TERN_(HAS_X_MIN, ES_LABEL(X_MIN)); TERN_(HAS_X_MAX, ES_LABEL(X_MAX));
TERN_(HAS_Y_MIN, ES_LABEL(Y_MIN)); TERN_(HAS_Y_MAX, ES_LABEL(Y_MAX));
TERN_(HAS_Z_MIN, ES_LABEL(Z_MIN)); TERN_(HAS_Z_MAX, ES_LABEL(Z_MAX));
TERN_(HAS_X_MIN, ES_LABEL(X_MIN)); TERN_(HAS_X_MAX, ES_LABEL(X_MAX));
TERN_(HAS_Y_MIN, ES_LABEL(Y_MIN)); TERN_(HAS_Y_MAX, ES_LABEL(Y_MAX));
TERN_(HAS_Z_MIN_PIN, ES_LABEL(Z_MIN)); TERN_(HAS_Z_MAX, ES_LABEL(Z_MAX));
TERN_(HAS_FILAMENT_SENSOR, draw_es_label(F(STR_FILAMENT)));
Update();
}
@ -82,9 +82,9 @@ void ESDiagClass::Draw() {
void ESDiagClass::Update() {
DWINUI::cursor.y = 80;
#define ES_REPORT(S) draw_es_state(READ(S##_PIN) == S##_ENDSTOP_HIT_STATE)
TERN_(HAS_X_MIN, ES_REPORT(X_MIN)); TERN_(HAS_X_MAX, ES_REPORT(X_MAX));
TERN_(HAS_Y_MIN, ES_REPORT(Y_MIN)); TERN_(HAS_Y_MAX, ES_REPORT(Y_MAX));
TERN_(HAS_Z_MIN, ES_REPORT(Z_MIN)); TERN_(HAS_Z_MAX, ES_REPORT(Z_MAX));
TERN_(HAS_X_MIN, ES_REPORT(X_MIN)); TERN_(HAS_X_MAX, ES_REPORT(X_MAX));
TERN_(HAS_Y_MIN, ES_REPORT(Y_MIN)); TERN_(HAS_Y_MAX, ES_REPORT(Y_MAX));
TERN_(HAS_Z_MIN_PIN, ES_REPORT(Z_MIN)); TERN_(HAS_Z_MAX, ES_REPORT(Z_MAX));
TERN_(HAS_FILAMENT_SENSOR, draw_es_state(READ(FIL_RUNOUT1_PIN) != FIL_RUNOUT1_STATE));
DWIN_UpdateLCD();
}

2
Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/endstop_state_screen.cpp
View file

@ -79,7 +79,7 @@ void EndstopStatesScreen::onRedraw(draw_mode_t) {
#else
PIN_DISABLED(3, 3, PSTR(STR_Y_MIN), Y_MIN)
#endif
#if HAS_Z_MIN
#if HAS_Z_MIN_PIN
PIN_ENABLED (5, 3, PSTR(STR_Z_MIN), Z_MIN, Z_MIN_ENDSTOP_HIT_STATE)
#else
PIN_DISABLED(5, 3, PSTR(STR_Z_MIN), Z_MIN)

24
Marlin/src/lcd/extui/mks_ui/mks_hardware.cpp
View file

@ -87,12 +87,12 @@
#if PIN_EXISTS(MT_DET_2)
mt_det2_sta = (READ(MT_DET_2_PIN) == LOW);
#endif
TERN_(HAS_X_ENDSTOP, endstopx1_sta = ESTATE(TERN(HAS_X_MIN, X_MIN, X_MAX)));
TERN_(HAS_X2_ENDSTOP, endstopx2_sta = ESTATE(TERN(HAS_X2_MIN, X2_MIN, X2_MAX)));
TERN_(HAS_Y_ENDSTOP, endstopy1_sta = ESTATE(TERN(HAS_Y_MIN, Y_MIN, Y_MAX)));
TERN_(HAS_Y2_ENDSTOP, endstopy2_sta = ESTATE(TERN(HAS_Y2_MIN, Y2_MIN, Y2_MAX)));
TERN_(HAS_Z_ENDSTOP, endstopz1_sta = ESTATE(TERN(HAS_Z_MIN, Z_MIN, Z_MAX)));
TERN_(HAS_Z2_ENDSTOP, endstopz2_sta = ESTATE(TERN(HAS_Z2_MIN, Z2_MIN, Z2_MAX)));
TERN_(HAS_X_ENDSTOP, endstopx1_sta = ESTATE(TERN(HAS_X_MIN, X_MIN, X_MAX)));
TERN_(HAS_X2_ENDSTOP, endstopx2_sta = ESTATE(TERN(HAS_X2_MIN, X2_MIN, X2_MAX)));
TERN_(HAS_Y_ENDSTOP, endstopy1_sta = ESTATE(TERN(HAS_Y_MIN, Y_MIN, Y_MAX)));
TERN_(HAS_Y2_ENDSTOP, endstopy2_sta = ESTATE(TERN(HAS_Y2_MIN, Y2_MIN, Y2_MAX)));
TERN_(HAS_Z_ENDSTOP, endstopz1_sta = ESTATE(TERN(HAS_Z_MIN_PIN, Z_MIN, Z_MAX)));
TERN_(HAS_Z2_ENDSTOP, endstopz2_sta = ESTATE(TERN(HAS_Z2_MIN, Z2_MIN, Z2_MAX)));
}
void test_gpio_readlevel_H() {
@ -104,12 +104,12 @@
#if PIN_EXISTS(MT_DET_2)
mt_det2_sta = (READ(MT_DET_2_PIN) == HIGH);
#endif
TERN_(HAS_X_ENDSTOP, endstopx1_sta = !ESTATE(TERN(HAS_X_MIN, X_MIN, X_MAX)));
TERN_(HAS_X2_ENDSTOP, endstopx2_sta = !ESTATE(TERN(HAS_X2_MIN, X2_MIN, X2_MAX)));
TERN_(HAS_Y_ENDSTOP, endstopy1_sta = !ESTATE(TERN(HAS_Y_MIN, Y_MIN, Y_MAX)));
TERN_(HAS_Y2_ENDSTOP, endstopy2_sta = !ESTATE(TERN(HAS_Y2_MIN, Y2_MIN, Y2_MAX)));
TERN_(HAS_Z_ENDSTOP, endstopz1_sta = !ESTATE(TERN(HAS_Z_MIN, Z_MIN, Z_MAX)));
TERN_(HAS_Z2_ENDSTOP, endstopz2_sta = !ESTATE(TERN(HAS_Z2_MIN, Z2_MIN, Z2_MAX)));
TERN_(HAS_X_ENDSTOP, endstopx1_sta = !ESTATE(TERN(HAS_X_MIN, X_MIN, X_MAX)));
TERN_(HAS_X2_ENDSTOP, endstopx2_sta = !ESTATE(TERN(HAS_X2_MIN, X2_MIN, X2_MAX)));
TERN_(HAS_Y_ENDSTOP, endstopy1_sta = !ESTATE(TERN(HAS_Y_MIN, Y_MIN, Y_MAX)));
TERN_(HAS_Y2_ENDSTOP, endstopy2_sta = !ESTATE(TERN(HAS_Y2_MIN, Y2_MIN, Y2_MAX)));
TERN_(HAS_Z_ENDSTOP, endstopz1_sta = !ESTATE(TERN(HAS_Z_MIN_PIN, Z_MIN, Z_MAX)));
TERN_(HAS_Z2_ENDSTOP, endstopz2_sta = !ESTATE(TERN(HAS_Z2_MIN, Z2_MIN, Z2_MAX)));
}
#include "../../../libs/buzzer.h"

8
Marlin/src/module/endstops.cpp
View file

@ -134,7 +134,7 @@ void Endstops::init() {
#if HAS_Y2_MAX
_INIT_ENDSTOP(MAX,Y,2);
#endif
#if HAS_Z_MIN
#if HAS_Z_MIN_PIN
_INIT_ENDSTOP(MIN,Z,);
#endif
#if HAS_Z_MAX
@ -598,7 +598,9 @@ void Endstops::update() {
#endif
#if HAS_Z_MIN && NONE(Z_SPI_SENSORLESS, Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
UPDATE_LIVE_STATE(Z, MIN);
#if HAS_Z_MIN_PIN
UPDATE_LIVE_STATE(Z, MIN);
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
#if HAS_Z2_MIN
UPDATE_LIVE_STATE(Z2, MIN);
@ -1179,7 +1181,7 @@ void Endstops::update() {
#if HAS_Y_MAX
ES_GET_STATE(Y_MAX);
#endif
#if HAS_Z_MIN
#if HAS_Z_MIN_PIN
ES_GET_STATE(Z_MIN);
#endif
#if HAS_Z_MAX

51
Marlin/src/pins/pins.h
View file

@ -65,6 +65,57 @@
#define HAS_FREE_AUX2_PINS 1
#endif
//
// Check for additional used endstop pins
//
#ifndef X_MIN_PIN
#define X_MIN_PIN 1001
#endif
#ifndef Y_MIN_PIN
#define Y_MIN_PIN 1002
#endif
#ifndef Z_MIN_PIN
#define Z_MIN_PIN 1003
#endif
#ifndef X_MAX_PIN
#define X_MAX_PIN 1004
#endif
#ifndef Y_MAX_PIN
#define Y_MAX_PIN 1005
#endif
#ifndef Z_MAX_PIN
#define Z_MAX_PIN 1006
#endif
#define _ENDSTOP_IS_ANY(P) (HAS_EXTRA_ENDSTOPS && (X2_STOP_PIN == P || Y2_STOP_PIN == P || Z2_STOP_PIN == P || Z3_STOP_PIN == P || Z4_STOP_PIN == P))
#if ENABLED(DUAL_X_CARRIAGE) || _ENDSTOP_IS_ANY(X_MIN_PIN) || _ENDSTOP_IS_ANY(X_MAX_PIN)
#define NEEDS_X_MINMAX 1
#endif
#if _ENDSTOP_IS_ANY(Y_MIN_PIN) || _ENDSTOP_IS_ANY(Y_MAX_PIN)
#define NEEDS_Y_MINMAX 1
#endif
#if _ENDSTOP_IS_ANY(Z_MIN_PIN) || _ENDSTOP_IS_ANY(Z_MAX_PIN) || BOTH(Z_HOME_TO_MAX, Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define NEEDS_Z_MINMAX 1
#endif
#undef _ENDSTOP_IS_ANY
#if X_MIN_PIN > 1000
#undef X_MIN_PIN
#endif
#if Y_MIN_PIN > 1000
#undef Y_MIN_PIN
#endif
#if Z_MIN_PIN > 1000
#undef Z_MIN_PIN
#endif
#if X_MAX_PIN > 1000
#undef X_MAX_PIN
#endif
#if Y_MAX_PIN > 1000
#undef Y_MAX_PIN
#endif
#if Z_MAX_PIN > 1000
#undef Z_MAX_PIN
#endif
// Test the target within the included pins file
#ifdef __MARLIN_DEPS__
#define NOT_TARGET(V...) 0

910
Marlin/src/pins/pins_postprocess.h
View file

File diff suppressed because it is too large Load diff

1
Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h
View file

@ -190,6 +190,7 @@
#define Z2_DIR_PIN PD0
#endif
// TODO: Use different pin names for auto-remapping
#ifdef OPTION_Z2_ENDSTOP
#define Z2_MIN_PIN PD1
#define Z2_MAX_PIN PB12

1
Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h
View file

@ -156,6 +156,7 @@
#define Y_MAX_PIN PB14
#define Z_MAX_PIN PB13
// TODO: Use different pin names for auto-remapping
#ifdef OPTION_Z2_ENDSTOP
#define Z2_MIN_PIN PD1
#define Z2_MAX_PIN PB12

6
Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
View file

@ -51,11 +51,7 @@
#define Z_STOP_PIN PC2 // Z-STOP
#if ENABLED(BTT_E3_RRF_IDEX_BOARD)
#if X2_USE_ENDSTOP == _XMAX_
#define X_MAX_PIN FPC2_PIN // X2-STOP
#elif X2_USE_ENDSTOP == _XMIN_
#define X_MIN_PIN FPC2_PIN // X2-STOP
#endif
#define X2_STOP_PIN FPC2_PIN // X2-STOP
#endif
//

20
Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h
View file

@ -106,11 +106,21 @@
// Pins on the extender
//
#if ENABLED(M5_EXTENDER)
#define X2_STOP_PIN PI4 // M5 M1_STOP
#define Y2_STOP_PIN PF12 // M5 M5_STOP
#define Z2_STOP_PIN PF4 // M5 M2_STOP
#define Z3_STOP_PIN PI7 // M5 M4_STOP
#define Z4_STOP_PIN PF6 // M5 M3_STOP
#ifndef X2_STOP_PIN
#define X2_STOP_PIN PI4 // M5 M1_STOP
#endif
#ifndef Y2_STOP_PIN
#define Y2_STOP_PIN PF12 // M5 M5_STOP
#endif
#ifndef Z2_STOP_PIN
#define Z2_STOP_PIN PF4 // M5 M2_STOP
#endif
#ifndef Z3_STOP_PIN
#define Z3_STOP_PIN PI7 // M5 M4_STOP
#endif
#ifndef Z4_STOP_PIN
#define Z4_STOP_PIN PF6 // M5 M3_STOP
#endif
#endif
#ifndef Z_MIN_PROBE_PIN

23
Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h
View file

@ -68,23 +68,6 @@
#define Z_MIN_PROBE_PIN PB7
#endif
//
// Check for additional used endstop pins
//
#if HAS_EXTRA_ENDSTOPS
#define _ENDSTOP_IS_ANY(ES) X2_USE_ENDSTOP == ES || Y2_USE_ENDSTOP == ES || Z2_USE_ENDSTOP == ES || Z3_USE_ENDSTOP == ES || Z4_USE_ENDSTOP == ES
#if _ENDSTOP_IS_ANY(_XMIN_) || _ENDSTOP_IS_ANY(_XMAX_)
#define NEEDS_X_MINMAX
#endif
#if _ENDSTOP_IS_ANY(_YMIN_) || _ENDSTOP_IS_ANY(_YMAX_)
#define NEEDS_Y_MINMAX
#endif
#if _ENDSTOP_IS_ANY(_ZMIN_) || _ENDSTOP_IS_ANY(_ZMAX_)
#define NEEDS_Z_MINMAX
#endif
#undef _ENDSTOP_IS_ANY
#endif
//
// Limit Switches
//
@ -95,7 +78,7 @@
#else
#define X_MIN_PIN E0_DIAG_PIN // E0DET
#endif
#elif EITHER(DUAL_X_CARRIAGE, NEEDS_X_MINMAX)
#elif NEEDS_X_MINMAX
#ifndef X_MIN_PIN
#define X_MIN_PIN X_DIAG_PIN // X-STOP
#endif
@ -113,7 +96,7 @@
#else
#define Y_MIN_PIN E1_DIAG_PIN // E1DET
#endif
#elif ENABLED(NEEDS_Y_MINMAX)
#elif NEEDS_Y_MINMAX
#ifndef Y_MIN_PIN
#define Y_MIN_PIN Y_DIAG_PIN // Y-STOP
#endif
@ -131,7 +114,7 @@
#else
#define Z_MIN_PIN E2_DIAG_PIN // PWRDET
#endif
#elif ENABLED(NEEDS_Z_MINMAX)
#elif NEEDS_Z_MINMAX
#ifndef Z_MIN_PIN
#define Z_MIN_PIN Z_DIAG_PIN // Z-STOP
#endif

25
Marlin/src/pins/stm32f4/pins_MKS_SKIPR_V1_0.h
View file

@ -53,29 +53,12 @@
#define E1_DIAG_PIN PC5 // NEOPIXEL
#define E2_DIAG_PIN PB14 // Z+
//
// Check for additional used endstop pins
//
#if HAS_EXTRA_ENDSTOPS
#define _ENDSTOP_IS_ANY(ES) X2_USE_ENDSTOP == ES || Y2_USE_ENDSTOP == ES || Z2_USE_ENDSTOP == ES || Z3_USE_ENDSTOP == ES || Z4_USE_ENDSTOP == ES
#if _ENDSTOP_IS_ANY(_XMIN_) || _ENDSTOP_IS_ANY(_XMAX_)
#define NEEDS_X_MINMAX
#endif
#if _ENDSTOP_IS_ANY(_YMIN_) || _ENDSTOP_IS_ANY(_YMAX_)
#define NEEDS_Y_MINMAX
#endif
#if _ENDSTOP_IS_ANY(_ZMIN_) || _ENDSTOP_IS_ANY(_ZMAX_)
#define NEEDS_Z_MINMAX
#endif
#undef _ENDSTOP_IS_ANY
#endif
//
// Limit Switches
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN // X-
#elif EITHER(DUAL_X_CARRIAGE, NEEDS_X_MINMAX)
#elif NEEDS_X_MINMAX
#ifndef X_MIN_PIN
#define X_MIN_PIN X_DIAG_PIN // X-
#endif
@ -88,7 +71,7 @@
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN // Y-
#elif ENABLED(NEEDS_Y_MINMAX)
#elif NEEDS_Y_MINMAX
#ifndef Y_MIN_PIN
#define Y_MIN_PIN Y_DIAG_PIN // Y-
#endif
@ -101,7 +84,7 @@
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN // Z-
#elif ENABLED(NEEDS_Z_MINMAX)
#elif NEEDS_Z_MINMAX
#ifndef Z_MIN_PIN
#define Z_MIN_PIN Z_DIAG_PIN // Z-
#endif
@ -113,7 +96,7 @@
#endif
#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) || ENABLED(USE_PROBE_FOR_Z_HOMING)
#ifndef Z_MIN_PROBE
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN E2_DIAG_PIN // defaults to 'Z+' connector
#endif
#endif

18
Marlin/src/pins/stm32g0/pins_BTT_MANTA_M8P_common.h
View file

@ -75,20 +75,6 @@
//#define Z_MIN_PROBE_PIN PF6 // IND-PROBE (with adjustable voltage & pullup set via jumpers)
#endif
//
// Check for additional used endstop pins
//
#if HAS_EXTRA_ENDSTOPS
#define _ENDSTOP_IS_ANY(ES) X2_USE_ENDSTOP == ES || Y2_USE_ENDSTOP == ES || Z2_USE_ENDSTOP == ES || Z3_USE_ENDSTOP == ES || Z4_USE_ENDSTOP == ES
#if _ENDSTOP_IS_ANY(_XMIN_) || _ENDSTOP_IS_ANY(_XMAX_)
#define NEEDS_X_MINMAX
#endif
#if _ENDSTOP_IS_ANY(_YMIN_) || _ENDSTOP_IS_ANY(_YMAX_)
#define NEEDS_Y_MINMAX
#endif
#undef _ENDSTOP_IS_ANY
#endif
//
// Limit Switches
//
@ -99,7 +85,7 @@
#else
#define X_MIN_PIN E0_DIAG_PIN // MIN5
#endif
#elif EITHER(DUAL_X_CARRIAGE, NEEDS_X_MINMAX)
#elif NEEDS_X_MINMAX
#ifndef X_MIN_PIN
#define X_MIN_PIN X_DIAG_PIN // MIN1
#endif
@ -117,7 +103,7 @@
#else
#define Y_MIN_PIN E1_DIAG_PIN // MIN6
#endif
#elif ENABLED(NEEDS_Y_MINMAX)
#elif NEEDS_Y_MINMAX
#ifndef Y_MIN_PIN
#define Y_MIN_PIN Y_DIAG_PIN // MIN2
#endif

23
Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h
View file

@ -68,23 +68,6 @@
#define Z_MIN_PROBE_PIN PB15
#endif
//
// Check for additional used endstop pins
//
#if HAS_EXTRA_ENDSTOPS
#define _ENDSTOP_IS_ANY(ES) X2_USE_ENDSTOP == ES || Y2_USE_ENDSTOP == ES || Z2_USE_ENDSTOP == ES || Z3_USE_ENDSTOP == ES || Z4_USE_ENDSTOP == ES
#if _ENDSTOP_IS_ANY(_XMIN_) || _ENDSTOP_IS_ANY(_XMAX_)
#define NEEDS_X_MINMAX
#endif
#if _ENDSTOP_IS_ANY(_YMIN_) || _ENDSTOP_IS_ANY(_YMAX_)
#define NEEDS_Y_MINMAX
#endif
#if _ENDSTOP_IS_ANY(_ZMIN_) || _ENDSTOP_IS_ANY(_ZMAX_)
#define NEEDS_Z_MINMAX
#endif
#undef _ENDSTOP_IS_ANY
#endif
//
// Limit Switches
//
@ -95,7 +78,7 @@
#else
#define X_MIN_PIN E0_DIAG_PIN // E0DET
#endif
#elif EITHER(DUAL_X_CARRIAGE, NEEDS_X_MINMAX)
#elif NEEDS_X_MINMAX
#ifndef X_MIN_PIN
#define X_MIN_PIN X_DIAG_PIN // X-STOP
#endif
@ -113,7 +96,7 @@
#else
#define Y_MIN_PIN E1_DIAG_PIN // E1DET
#endif
#elif ENABLED(NEEDS_Y_MINMAX)
#elif NEEDS_Y_MINMAX
#ifndef Y_MIN_PIN
#define Y_MIN_PIN Y_DIAG_PIN // Y-STOP
#endif
@ -131,7 +114,7 @@
#else
#define Z_MIN_PIN E2_DIAG_PIN // PWRDET
#endif
#elif ENABLED(NEEDS_Z_MINMAX)
#elif NEEDS_Z_MINMAX
#ifndef Z_MIN_PIN
#define Z_MIN_PIN Z_DIAG_PIN // Z-STOP
#endif

2
buildroot/tests/DUE
View file

@ -37,7 +37,7 @@ exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options
#
restore_configs
opt_set MOTHERBOARD BOARD_RADDS Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z3_DRIVER_TYPE A4988
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG ENDSTOPPULLUPS BLTOUCH AUTO_BED_LEVELING_BILINEAR \
opt_enable ENDSTOPPULLUPS BLTOUCH AUTO_BED_LEVELING_BILINEAR \
Z_STEPPER_AUTO_ALIGN Z_STEPPER_ALIGN_STEPPER_XY Z_SAFE_HOMING
pins_set ramps/RAMPS X_MAX_PIN -1
pins_set ramps/RAMPS Y_MAX_PIN -1

4
buildroot/tests/FYSETC_F6
View file

@ -43,7 +43,7 @@ opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \
MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \
USE_ZMIN_PLUG SENSORLESS_HOMING TMC_DEBUG M114_DETAIL
SENSORLESS_HOMING TMC_DEBUG M114_DETAIL
exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games" "$3"
#
@ -62,7 +62,7 @@ opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \
X_MAX_ENDSTOP_HIT_STATE HIGH \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130_STANDALONE E0_DRIVER_TYPE TMC2660 \
X_HARDWARE_SERIAL Serial2
opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \
opt_enable FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \
FYSETC_242_OLED_12864 EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL Z_SAFE_HOMING \
STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD SENSORLESS_HOMING EDGE_STEPPING
exec_test $1 $2 "FYSETC_F6 | SCARA | Mixed TMC | EEPROM" "$3"

4
buildroot/tests/LPC1769
View file

@ -29,7 +29,7 @@ exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3"
#restore_configs
#opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI
#opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \
#opt_enable COREYX DAC_MOTOR_CURRENT_DEFAULT \
# REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING \
# AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
# FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
@ -56,7 +56,7 @@ opt_set MOTHERBOARD BOARD_COHESION3D_REMIX \
opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT MECHANICAL_GANTRY_CALIBRATION \
TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \
SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \
AXIS4_ROTATES I_MIN_POS I_MAX_POS I_HOME_DIR I_ENABLE_ON USE_IMIN_PLUG INVERT_I_DIR \
AXIS4_ROTATES I_MIN_POS I_MAX_POS I_HOME_DIR I_ENABLE_ON INVERT_I_DIR \
EXPERIMENTAL_I2CBUS
opt_disable PSU_CONTROL Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING + I Axis" "$3"

2
buildroot/tests/mega1280
View file

@ -40,7 +40,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_ZRIB_V52 \
LCD_LANGUAGE pt REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 \
EXTRUDERS 2 TEMP_SENSOR_1 1 X2_DRIVER_TYPE A4988
opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD
opt_enable DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD
exec_test $1 $2 "ZRIB_V52 | DUAL_X_CARRIAGE" "$3"
#

7
buildroot/tests/rambo
View file

@ -17,7 +17,7 @@ opt_set MOTHERBOARD BOARD_RAMBO \
GRID_MAX_POINTS_X 16 AUTO_POWER_E_TEMP 80 \
FANMUX0_PIN 53 FIL_MOTION1_PIN 45
opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN USE_WATCHDOG
opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
FIX_MOUNTED_PROBE CODEPENDENT_XY_HOMING PIDTEMPBED PTC_PROBE PTC_BED \
PREHEAT_BEFORE_PROBING PROBING_HEATERS_OFF PROBING_FANS_OFF PROBING_STEPPERS_OFF WAIT_FOR_BED_HEATER \
EEPROM_SETTINGS SDSUPPORT SD_REPRINT_LAST_SELECTED_FILE BINARY_FILE_TRANSFER \
@ -53,8 +53,7 @@ opt_set MOTHERBOARD BOARD_RAMBO \
AXIS_RELATIVE_MODES '{ false, false, false }' \
BED_TRAMMING_LEVELING_ORDER '{ LF, RF }' \
X2_DRIVER_TYPE A4988 Y2_DRIVER_TYPE A4988
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \
S_CURVE_ACCELERATION X_DUAL_ENDSTOPS Y_DUAL_ENDSTOPS \
ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES \
LCD_BED_TRAMMING BED_TRAMMING_INCLUDE_CENTER
@ -115,7 +114,7 @@ opt_set MOTHERBOARD BOARD_RAMBO \
CONTROLLER_FAN_PIN X_MAX_PIN FILWIDTH_PIN 5 \
FAN_MIN_PWM 50 FAN_KICKSTART_TIME 100 \
XY_FREQUENCY_LIMIT 15
opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
opt_enable COREYX MIXING_EXTRUDER GRADIENT_MIX \
BABYSTEPPING BABYSTEP_XY BABYSTEP_DISPLAY_TOTAL FILAMENT_LCD_DISPLAY \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER MENU_ADDAUTOSTART SDSUPPORT SDCARD_SORT_ALPHA \
ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM \

1
buildroot/tests/teensy31
View file

@ -15,7 +15,6 @@ exec_test $1 $2 "Teensy3.1 with default config" "$3"
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY31_32 X_HOME_DIR 0 Y_HOME_DIR 0 Z_HOME_DIR 0
opt_disable USE_XMIN_PLUG USE_YMIN_PLUG USE_ZMIN_PLUG
exec_test $1 $2 "Teensy3.1 with Zero Endstops" "$3"
#

4
buildroot/tests/teensy35
View file

@ -87,7 +87,7 @@ opt_set MOTHERBOARD BOARD_TEENSY35_36 \
X_DRIVER_TYPE TMC5160 Y_DRIVER_TYPE TMC5160 \
X_MIN_ENDSTOP_HIT_STATE LOW Y_MIN_ENDSTOP_HIT_STATE LOW \
X_CS_PIN 46 Y_CS_PIN 47
opt_enable COREXY USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
opt_enable COREXY MONITOR_DRIVER_STATUS SENSORLESS_HOMING
exec_test $1 $2 "Teensy 3.5/3.6 COREXY" "$3"
#
@ -103,7 +103,7 @@ exec_test $1 $2 "Teensy 3.5/3.6 COREXZ | BACKLASH" "$3"
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z2_MIN_PIN 2
opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
opt_enable Z_MULTI_ENDSTOPS
pins_set ramps/RAMPS X_MAX_PIN -1
exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"

4
buildroot/tests/teensy41
View file

@ -90,7 +90,7 @@ opt_set MOTHERBOARD BOARD_TEENSY41 \
X_DRIVER_TYPE TMC5160 Y_DRIVER_TYPE TMC5160 \
X_MIN_ENDSTOP_HIT_STATE LOW Y_MIN_ENDSTOP_HIT_STATE LOW \
X_CS_PIN 46 Y_CS_PIN 47
opt_enable COREXY USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
opt_enable COREXY MONITOR_DRIVER_STATUS SENSORLESS_HOMING
exec_test $1 $2 "Teensy 4.0/4.1 COREXY" "$3"
#
@ -106,7 +106,7 @@ exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" "$3"
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z2_MIN_PIN 2
opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
opt_enable Z_MULTI_ENDSTOPS
pins_set ramps/RAMPS X_MAX_PIN -1
exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"