0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

📝 GCode => G-Code

Browse source
This commit is contained in:
Scott Lahteine 2023-10-12 12:14:57 -05:00
parent 5bd39ba73f
commit 4744997c16
11 changed files with 21 additions and 21 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/src/HAL/STM32F1/MarlinSerial.cpp
View file

@ -75,7 +75,7 @@ static __always_inline void my_usart_irq(ring_buffer *rb, ring_buffer *wb, usart
}
// Not every MarlinSerial port should handle emergency parsing.
// It would not make sense to parse GCode from TMC responses, for example.
// It would not make sense to parse G-Code from TMC responses, for example.
constexpr bool serial_handles_emergency(int port) {
return (false
#ifdef SERIAL_PORT

2
Marlin/src/gcode/calibrate/G28.cpp
View file

@ -536,7 +536,7 @@ void GcodeSuite::G28() {
/**
* Preserve DXC mode across a G28 for IDEX printers in DXC_DUPLICATION_MODE.
* This is important because it lets a user use the LCD Panel to set an IDEX Duplication mode, and
* then print a standard GCode file that contains a single print that does a G28 and has no other
* then print a standard G-Code file that contains a single print that does a G28 and has no other
* IDEX specific commands in it.
*/
#if ENABLED(DUAL_X_CARRIAGE)

2
Marlin/src/gcode/control/M42.cpp
View file

@ -44,7 +44,7 @@ void protected_pin_err() {
}
/**
* M42: Change pin status via GCode
* M42: Change pin status via G-Code
*
* P<pin> Pin number (LED if omitted)
* For LPC1768 specify pin P1_02 as M42 P102,

2
Marlin/src/gcode/feature/mixing/M163-M165.cpp
View file

@ -76,7 +76,7 @@ void GcodeSuite::M164() {
* I[factor] Mix factor for extruder stepper 6
*/
void GcodeSuite::M165() {
// Get mixing parameters from the GCode
// Get mixing parameters from the G-Code
// The total "must" be 1.0 (but it will be normalized)
// If no mix factors are given, the old mix is preserved
const char mixing_codes[] = { LIST_N(MIXING_STEPPERS, 'A', 'B', 'C', 'D', 'H', 'I') };

6
Marlin/src/gcode/gcode.cpp
View file

@ -153,7 +153,7 @@ int8_t GcodeSuite::get_target_e_stepper_from_command(const int8_t dval/*=-1*/) {
}
/**
* Set XYZ...E destination and feedrate from the current GCode command
* Set XYZ...E destination and feedrate from the current G-Code command
*
* - Set destination from included axis codes
* - Set to current for missing axis codes
@ -459,7 +459,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
#endif
#if ENABLED(DEBUG_GCODE_PARSER)
case 800: parser.debug(); break; // G800: GCode Parser Test for G
case 800: parser.debug(); break; // G800: G-Code Parser Test for G
#endif
default: parser.unknown_command_warning(); break;
@ -1035,7 +1035,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
#endif
#if ENABLED(DEBUG_GCODE_PARSER)
case 800: parser.debug(); break; // M800: GCode Parser Test for M
case 800: parser.debug(); break; // M800: G-Code Parser Test for M
#endif
#if ENABLED(GCODE_REPEAT_MARKERS)

2
Marlin/src/gcode/gcode.h
View file

@ -462,7 +462,7 @@ public:
*/
enum MarlinBusyState : char {
NOT_BUSY, // Not in a handler
IN_HANDLER, // Processing a GCode
IN_HANDLER, // Processing a G-Code
IN_PROCESS, // Known to be blocking command input (as in G29)
PAUSED_FOR_USER, // Blocking pending any input
PAUSED_FOR_INPUT // Blocking pending text input (concept)

8
Marlin/src/gcode/parser.cpp
View file

@ -21,7 +21,7 @@
*/
/**
* parser.cpp - Parser for a GCode line, providing a parameter interface.
* parser.cpp - Parser for a G-Code line, providing a parameter interface.
*/
#include "parser.h"
@ -66,7 +66,7 @@ uint16_t GCodeParser::codenum;
char *GCodeParser::command_args; // start of parameters
#endif
// Create a global instance of the GCode parser singleton
// Create a global instance of the G-Code parser singleton
GCodeParser parser;
/**
@ -108,7 +108,7 @@ void GCodeParser::reset() {
/**
* Populate the command line state (command_letter, codenum, subcode, and string_arg)
* by parsing a single line of GCode. 58 bytes of SRAM are used to speed up seen/value.
* by parsing a single line of G-Code. 58 bytes of SRAM are used to speed up seen/value.
*/
void GCodeParser::parse(char *p) {
@ -317,7 +317,7 @@ void GCodeParser::parse(char *p) {
#endif
#if ENABLED(FASTER_GCODE_PARSER)
// Arguments MUST be uppercase for fast GCode parsing
// Arguments MUST be uppercase for fast G-Code parsing
#define PARAM_OK(P) WITHIN((P), 'A', 'Z')
#else
#define PARAM_OK(P) true

10
Marlin/src/gcode/parser.h
View file

@ -22,8 +22,8 @@
#pragma once
/**
* parser.h - Parser for a GCode line, providing a parameter interface.
* Codes like M149 control the way the GCode parser behaves,
* parser.h - Parser for a G-Code line, providing a parameter interface.
* Codes like M149 control the way the G-Code parser behaves,
* so settings for these codes are located in this class.
*/
@ -43,7 +43,7 @@
#endif
/**
* GCode parser
* G-Code parser
*
* - Parse a single G-code line for its letter, code, subcode, and parameters
* - FASTER_GCODE_PARSER:
@ -68,7 +68,7 @@ private:
public:
// Global states for GCode-level units features
// Global states for G-Code-level units features
static bool volumetric_enabled;
@ -233,7 +233,7 @@ public:
FORCE_INLINE static char* unescape_string(char* &src) { return src; }
#endif
// Populate all fields by parsing a single line of GCode
// Populate all fields by parsing a single line of G-Code
// This uses 54 bytes of SRAM to speed up seen/value
static void parse(char * p);

4
Marlin/src/gcode/queue.h
View file

@ -35,7 +35,7 @@ public:
*/
struct SerialState {
/**
* GCode line number handling. Hosts may include line numbers when sending
* G-Code line number handling. Hosts may include line numbers when sending
* commands to Marlin, and lines will be checked for sequentiality.
* M110 N<int> sets the current line number.
*/
@ -48,7 +48,7 @@ public:
static SerialState serial_state[NUM_SERIAL]; //!< Serial states for each serial port
/**
* GCode Command Queue
* G-Code Command Queue
* A simple (circular) ring buffer of BUFSIZE command strings.
*
* Commands are copied into this buffer by the command injectors

2
Marlin/src/lcd/e3v2/jyersui/dwin.cpp
View file

@ -4201,7 +4201,7 @@ void JyersDWIN::popupHandler(const PopupID popupid, const bool option/*=false*/)
case Popup_PIDWait: drawPopup(F("PID Autotune"), F("in process"), F("Please wait until done."), Proc_Wait, ICON_BLTouch); break;
case Popup_MPCWait: drawPopup(F("MPC Autotune"), F("in process"), F("Please wait until done."), Proc_Wait, ICON_BLTouch); break;
case Popup_Resuming: drawPopup(F("Resuming Print"), F("Please wait until done."), F(""), Proc_Wait, ICON_BLTouch); break;
case Popup_Custom: drawPopup(F("Running Custom GCode"), F("Please wait until done."), F(""), Proc_Wait, ICON_BLTouch); break;
case Popup_Custom: drawPopup(F("Running Custom G-Code"), F("Please wait until done."), F(""), Proc_Wait, ICON_BLTouch); break;
default: break;
}
}

2
docs/Queue.md
View file

@ -19,7 +19,7 @@ Here's a basic flowchart of Marlin command processing:
| Host | | SerialState RingBuffer | | |
| | Marlin | NUM_SERIAL BUF_SIZE | | Marlin |
+--+---+ R/TX_BUFFER_SIZE | +---+ +------------------+ | | |
| +------------+ | | | | | | | GCode |
| +------------+ | | | | | | | G-Code |
| | | | | | | MAX_CMD_SIZE +-+-----> processor |
| | Platform | | | | On EOL | +--------------+ | r_pos | |
+-------------> serial's +-----------> +--------> | G-code | | | +-----------+