FYSETC E4 board support (#20032)
This commit is contained in:
George Fu
GitHub
parent
8c052e43f1
commit
4785b04aa1
|
|
@ -378,6 +378,7 @@
|
|||
#define BOARD_MRR_ESPA 6001 // MRR ESPA board based on ESP32 (native pins only)
|
||||
#define BOARD_MRR_ESPE 6002 // MRR ESPE board based on ESP32 (with I2S stepper stream)
|
||||
#define BOARD_E4D_BOX 6003 // E4d@BOX
|
||||
#define BOARD_FYSETC_E4 6004 // FYSETC E4
|
||||
|
||||
//
|
||||
// SAMD51 ARM Cortex M4
|
||||
|
|
|
|||
126
Marlin/src/pins/esp32/pins_FYSETC_E4.h
Normal file
126
Marlin/src/pins/esp32/pins_FYSETC_E4.h
Normal file
|
|
@ -0,0 +1,126 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* FYSETC E4 pin assignments
|
||||
* FYSETC E4 is a 3D printer control board based on the ESP32 microcontroller.
|
||||
* Supports 4 stepper drivers, heated bed, single hotend.
|
||||
*/
|
||||
|
||||
#ifndef ARDUINO_ARCH_ESP32
|
||||
#error "Oops! Select an ESP32 board in 'Tools > Board.'"
|
||||
#elif EXTRUDERS > 1 || E_STEPPERS > 1
|
||||
#error "FYSETC E4 only supports one E Stepper. Comment out this line to continue."
|
||||
#elif HOTENDS > 1
|
||||
#error "FYSETC E4 currently supports only one hotend. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "FYSETC_E4"
|
||||
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||
|
||||
//
|
||||
// Disable I2S stepper stream
|
||||
//
|
||||
#undef I2S_STEPPER_STREAM
|
||||
#define I2S_WS -1
|
||||
#define I2S_BCK -1
|
||||
#define I2S_DATA -1
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN 34
|
||||
#define Y_STOP_PIN 35
|
||||
#define Z_STOP_PIN 15
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 27
|
||||
#define X_DIR_PIN 26
|
||||
#define X_ENABLE_PIN 25
|
||||
|
||||
#define Y_STEP_PIN 33
|
||||
#define Y_DIR_PIN 32
|
||||
#define Y_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#define Z_STEP_PIN 14
|
||||
#define Z_DIR_PIN 12
|
||||
#define Z_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#define E0_STEP_PIN 16
|
||||
#define E0_DIR_PIN 17
|
||||
#define E0_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#if HAS_TMC_UART
|
||||
//
|
||||
// TMC2209 stepper drivers
|
||||
//
|
||||
|
||||
//
|
||||
// Hardware serial 1
|
||||
//
|
||||
#define X_HARDWARE_SERIAL Serial1
|
||||
#define Y_HARDWARE_SERIAL Serial1
|
||||
#define Z_HARDWARE_SERIAL Serial1
|
||||
#define E0_HARDWARE_SERIAL Serial1
|
||||
|
||||
#define TMC_BAUD_RATE 115200
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 36 // Analog Input
|
||||
#define TEMP_BED_PIN 39 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 2
|
||||
#define FAN_PIN 13
|
||||
#define HEATER_BED_PIN 4
|
||||
|
||||
//
|
||||
// MicroSD card
|
||||
//
|
||||
#define MOSI_PIN 23
|
||||
#define MISO_PIN 19
|
||||
#define SCK_PIN 18
|
||||
#define SDSS 5
|
||||
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
|
||||
|
||||
/**
|
||||
* Hardware serial pins
|
||||
*
|
||||
* Override these pins in Configuration.h or Configuration_adv.h if needed.
|
||||
*
|
||||
* Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX
|
||||
* but MRR ESPA does not have enough spare pins for such reassignment.
|
||||
*/
|
||||
#ifndef HARDWARE_SERIAL1_RX
|
||||
#define HARDWARE_SERIAL1_RX 21
|
||||
#endif
|
||||
#ifndef HARDWARE_SERIAL1_TX
|
||||
#define HARDWARE_SERIAL1_TX 22
|
||||
#endif
|
||||
|
|
@ -665,6 +665,8 @@
|
|||
#include "esp32/pins_MRR_ESPE.h" // ESP32 env:esp32
|
||||
#elif MB(E4D_BOX)
|
||||
#include "esp32/pins_E4D.h" // ESP32 env:esp32
|
||||
#elif MB(FYSETC_E4)
|
||||
#include "esp32/pins_FYSETC_E4.h" // ESP32 env:FYSETC_E4
|
||||
|
||||
//
|
||||
// Adafruit Grand Central M4 (SAMD51 ARM Cortex-M4)
|
||||
|
|
|
|||
|
|
@ -1363,6 +1363,11 @@ upload_speed = 115200
|
|||
#upload_port = marlinesp.local
|
||||
#board_build.flash_mode = qio
|
||||
|
||||
[env:FYSETC_E4]
|
||||
platform = espressif32@1.11.2
|
||||
extends = env:esp32
|
||||
board_build.partitions = default_16MB.csv
|
||||
|
||||
#
|
||||
# Teensy 3.1 / 3.2 (ARM Cortex-M4)
|
||||
#
|
||||
|
|
|
|||
Loading…
Reference in a new issue