* Fixed Makefile for Marlin 2.0 (#10255) - Makefile now supports the new Marlin 2.0 directory hierarchy. - RELOC_WORKAROUND is now automatically enabled based on avr-gcc version. * Makefile support for U8glib and TMC2130Stepper - Updated paths for oliver's U8glib 1.19.1 - Added option for teemuatlut's TMC2130Stepper 2.2.1
This commit is contained in:
Marcio Teixeira
Scott Lahteine
parent
241996d5d6
commit
4d1a61335c
|
|
@ -4,6 +4,7 @@
|
|||
# Arduino 0011 Makefile
|
||||
# Arduino adaptation by mellis, eighthave, oli.keller
|
||||
# Marlin adaption by Daid
|
||||
# Marlin 2.0 support and RELOC_WORKAROUND by @marcio-ao
|
||||
#
|
||||
# This has been tested with Arduino 0022.
|
||||
#
|
||||
|
|
@ -85,9 +86,22 @@ WIRE ?= 0
|
|||
# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
|
||||
U8GLIB ?= 1
|
||||
|
||||
# this defines whether to add a workaround for the avr-gcc relocation bug
|
||||
# https://www.stix.id.au/wiki/AVR_relocation_truncations_workaround
|
||||
RELOC_WORKAROUND ?= 1
|
||||
# this defines whether to include the Trinamic TMC2630Stepper
|
||||
TMC2630 ?= 1
|
||||
|
||||
############
|
||||
# Try to automatically determine whether RELOC_WORKAROUND is needed based
|
||||
# on GCC versions:
|
||||
# http://www.avrfreaks.net/comment/1789106#comment-1789106
|
||||
|
||||
CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d\ )
|
||||
CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
|
||||
CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d\ )
|
||||
CC_VER:=$(shell echo $$(( $(CC_MAJ) * 10000 + $(CC_MIN) * 100 + $(CC_PATCHLEVEL) )))
|
||||
ifeq ($(shell test $(CC_VER) -lt 40901 && echo 1),1)
|
||||
@echo This version of GCC is likely broken. Enabling relocation workaround.
|
||||
RELOC_WORKAROUND = 1
|
||||
endif
|
||||
|
||||
############################################################################
|
||||
# Below here nothing should be changed...
|
||||
|
|
@ -425,6 +439,10 @@ TARGET = $(notdir $(CURDIR))
|
|||
# there is no need to specify explicit pathnames as long as the
|
||||
# directory is added here
|
||||
|
||||
# The Makefile for previous versions of Marlin used VPATH for all
|
||||
# source files, but for Marlin 2.0, we use VPATH only for arduino
|
||||
# library files.
|
||||
|
||||
VPATH = .
|
||||
VPATH += $(BUILD_DIR)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
|
||||
|
|
@ -446,7 +464,11 @@ VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
|
|||
endif
|
||||
ifeq ($(U8GLIB), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/utility
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/clib
|
||||
endif
|
||||
ifeq ($(TMC2630), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMC2130Stepper/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMC2130Stepper/src/source
|
||||
endif
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), arduino)
|
||||
|
|
@ -460,37 +482,41 @@ HARDWARE_SUB_VARIANT ?= standard
|
|||
VPATH += $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
|
||||
endif
|
||||
endif
|
||||
SRC = wiring.c \
|
||||
LIB_SRC = wiring.c \
|
||||
wiring_analog.c wiring_digital.c \
|
||||
wiring_pulse.c \
|
||||
wiring_shift.c WInterrupts.c hooks.c
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), Teensy)
|
||||
SRC = wiring.c
|
||||
LIB_SRC = wiring.c
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
|
||||
endif
|
||||
|
||||
CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp Tone.cpp
|
||||
CXXSRC += $(wildcard *.cpp)
|
||||
LIB_CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp Tone.cpp
|
||||
|
||||
ifeq ($(NEOPIXEL), 1)
|
||||
CXXSRC += Adafruit_NeoPixel.cpp
|
||||
LIB_CXXSRC += Adafruit_NeoPixel.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(LIQUID_TWI2), 0)
|
||||
CXXSRC += LiquidCrystal.cpp
|
||||
LIB_CXXSRC += LiquidCrystal.cpp
|
||||
else
|
||||
SRC += twi.c
|
||||
CXXSRC += Wire.cpp LiquidTWI2.cpp
|
||||
LIB_SRC += twi.c
|
||||
LIB_CXXSRC += Wire.cpp LiquidTWI2.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(WIRE), 1)
|
||||
SRC += twi.c
|
||||
CXXSRC += Wire.cpp
|
||||
LIB_SRC += twi.c
|
||||
LIB_CXXSRC += Wire.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(U8GLIB), 1)
|
||||
SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_data.c
|
||||
LIB_CXXSRC += U8glib.cpp
|
||||
LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_data.c
|
||||
endif
|
||||
|
||||
ifeq ($(TMC2630), 1)
|
||||
LIB_CXXSRC += TMC2130Stepper.cpp TMC2130Stepper_COOLCONF.cpp TMC2130Stepper_DRV_STATUS.cpp TMC2130Stepper_IHOLD_IRUN.cpp TMC2130Stepper_CHOPCONF.cpp TMC2130Stepper_GCONF.cpp TMC2130Stepper_PWMCONF.cpp SW_SPI.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(RELOC_WORKAROUND), 1)
|
||||
|
|
@ -500,9 +526,9 @@ endif
|
|||
|
||||
#Check for Arduino 1.0.0 or higher and use the correct source files for that version
|
||||
ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
|
||||
CXXSRC += main.cpp
|
||||
LIB_CXXSRC += main.cpp
|
||||
else
|
||||
SRC += pins_arduino.c main.c
|
||||
LIB_SRC += pins_arduino.c main.c
|
||||
endif
|
||||
|
||||
FORMAT = ihex
|
||||
|
|
@ -537,8 +563,8 @@ CXXDEFS = $(CDEFS)
|
|||
|
||||
ifeq ($(HARDWARE_VARIANT), Teensy)
|
||||
CDEFS += -DUSB_SERIAL
|
||||
SRC += usb.c pins_teensy.c
|
||||
CXXSRC += usb_api.cpp
|
||||
LIB_SRC += usb.c pins_teensy.c
|
||||
LIB_CXXSRC += usb_api.cpp
|
||||
endif
|
||||
|
||||
# Add all the source directories as include directories too
|
||||
|
|
@ -578,13 +604,21 @@ AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
|
|||
-p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
|
||||
-b$(UPLOAD_RATE)
|
||||
|
||||
# Since Marlin 2.0, the source files may be distributed into several
|
||||
# different directories, so it is necessary to find them recursively
|
||||
|
||||
SRC = $(shell find src -name '*.c' -type f)
|
||||
CXXSRC = $(shell find src -name '*.cpp' -type f)
|
||||
|
||||
# Define all object files.
|
||||
OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
|
||||
OBJ = ${patsubst %.c, $(BUILD_DIR)/arduino/%.o, ${LIB_SRC}}
|
||||
OBJ += ${patsubst %.cpp, $(BUILD_DIR)/arduino/%.o, ${LIB_CXXSRC}}
|
||||
OBJ += ${patsubst %.S, $(BUILD_DIR)/arduino/%.o, ${LIB_ASRC}}
|
||||
OBJ += ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
|
||||
OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}}
|
||||
OBJ += ${patsubst %.S, $(BUILD_DIR)/%.o, ${ASRC}}
|
||||
|
||||
# Define all listing files.
|
||||
LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
|
||||
LST = $(LIB_ASRC:.S=.lst) $(LIB_CXXSRC:.cpp=.lst) $(LIB_SRC:.c=.lst)
|
||||
|
||||
# Combine all necessary flags and optional flags.
|
||||
# Add target processor to flags.
|
||||
|
|
@ -601,14 +635,14 @@ else
|
|||
P=
|
||||
endif
|
||||
|
||||
# Create required build hierarchy if it does not exist
|
||||
|
||||
$(shell mkdir -p $(dir $(OBJ)))
|
||||
|
||||
# Default target.
|
||||
all: sizeafter
|
||||
|
||||
build: $(BUILD_DIR) elf hex
|
||||
|
||||
# Creates the object directory
|
||||
$(BUILD_DIR):
|
||||
$P mkdir -p $(BUILD_DIR)
|
||||
build: elf hex
|
||||
|
||||
elf: $(BUILD_DIR)/$(TARGET).elf
|
||||
hex: $(BUILD_DIR)/$(TARGET).hex
|
||||
|
|
@ -674,29 +708,34 @@ extcoff: $(TARGET).elf
|
|||
$(NM) -n $< > $@
|
||||
|
||||
# Link: create ELF output file from library.
|
||||
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -Wl,--gc-sections,--relax -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
|
||||
|
||||
# Object files that were found in "src" will be stored in $(BUILD_DIR)
|
||||
# in directories that mirror the structure of "src"
|
||||
|
||||
$(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CC $<"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: $(BUILD_DIR)/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
|
||||
|
||||
# Object files for Arduino libs will be created in $(BUILD_DIR)/arduino
|
||||
|
||||
$(BUILD_DIR)/arduino/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CC $<"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/arduino/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
|
||||
|
||||
# Target: clean project.
|
||||
clean:
|
||||
$(Pecho) " RM $(BUILD_DIR)/*"
|
||||
$P $(REMOVE) $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET).cof $(BUILD_DIR)/$(TARGET).elf \
|
||||
$(BUILD_DIR)/$(TARGET).map $(BUILD_DIR)/$(TARGET).sym $(BUILD_DIR)/$(TARGET).lss $(BUILD_DIR)/$(TARGET).cpp \
|
||||
$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
|
||||
$(Pecho) " RMDIR $(BUILD_DIR)/"
|
||||
$P rm -rf $(BUILD_DIR)
|
||||
|
||||
|
|
@ -704,4 +743,4 @@ clean:
|
|||
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
|
||||
|
||||
# Automaticaly include the dependency files created by gcc
|
||||
-include ${wildcard $(BUILD_DIR)/*.d}
|
||||
-include ${patsubst %.o, %.d, ${OBJ}}
|
||||
Loading…
Reference in a new issue