From 520b97083e52efdd47ab434b97823e48d85ade62 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 27 Sep 2021 11:03:07 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=8E=A8=20Apply=20F()=20to=20serial=20macr?= =?UTF-8?q?os?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp | 8 +- Marlin/src/core/debug_out.h | 8 +- Marlin/src/core/debug_section.h | 16 +-- Marlin/src/core/serial.cpp | 24 ++-- Marlin/src/core/serial.h | 126 ++++++++++++------ Marlin/src/core/utility.cpp | 6 +- Marlin/src/feature/bedlevel/ubl/ubl.cpp | 8 +- Marlin/src/feature/encoder_i2c.cpp | 2 +- Marlin/src/feature/meatpack.cpp | 5 +- Marlin/src/feature/pause.cpp | 2 +- Marlin/src/feature/probe_temp_comp.cpp | 6 +- Marlin/src/feature/runout.h | 4 +- Marlin/src/feature/tmc_util.cpp | 15 +-- Marlin/src/gcode/bedlevel/G35.cpp | 2 +- Marlin/src/gcode/bedlevel/M420.cpp | 8 +- Marlin/src/gcode/config/M217.cpp | 4 +- Marlin/src/gcode/config/M302.cpp | 2 +- Marlin/src/gcode/control/M211.cpp | 4 +- Marlin/src/gcode/control/M80_M81.cpp | 2 +- Marlin/src/gcode/feature/L6470/M122.cpp | 6 +- Marlin/src/gcode/feature/L6470/M906.cpp | 2 +- Marlin/src/gcode/feature/powerloss/M413.cpp | 4 +- Marlin/src/gcode/feature/trinamic/M569.cpp | 2 +- Marlin/src/gcode/geometry/G17-G19.cpp | 8 +- Marlin/src/gcode/parser.h | 4 +- Marlin/src/gcode/units/M149.cpp | 2 +- .../lcd/extui/anycubic_chiron/chiron_tft.cpp | 10 +- Marlin/src/module/temperature.cpp | 38 +++--- Marlin/src/sd/cardreader.cpp | 4 +- docs/Serial.md | 2 +- 30 files changed, 187 insertions(+), 147 deletions(-) diff --git a/Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp b/Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp index 6570a599a4..1991d79719 100644 --- a/Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp +++ b/Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp @@ -90,15 +90,15 @@ bool PersistentStore::access_finish() { // to see errors that are happening in read_data / write_data static void debug_rw(const bool write, int &pos, const uint8_t *value, const size_t size, const FRESULT s, const size_t total=0) { #if ENABLED(DEBUG_SD_EEPROM_EMULATION) - PGM_P const rw_str = write ? PSTR("write") : PSTR("read"); + FSTR_P const rw_str = write ? F("write") : F("read"); SERIAL_CHAR(' '); - SERIAL_ECHOPGM_P(rw_str); + SERIAL_ECHOF(rw_str); SERIAL_ECHOLNPGM("_data(", pos, ",", *value, ",", size, ", ...)"); if (total) { SERIAL_ECHOPGM(" f_"); - SERIAL_ECHOPGM_P(rw_str); + SERIAL_ECHOF(rw_str); SERIAL_ECHOPGM("()=", s, "\n size=", size, "\n bytes_"); - SERIAL_ECHOLNPGM_P(write ? PSTR("written=") : PSTR("read="), total); + SERIAL_ECHOLNF(write ? F("written=") : F("read="), total); } else SERIAL_ECHOLNPGM(" f_lseek()=", s); diff --git a/Marlin/src/core/debug_out.h b/Marlin/src/core/debug_out.h index 4e30a5306e..eb1c91e507 100644 --- a/Marlin/src/core/debug_out.h +++ b/Marlin/src/core/debug_out.h @@ -36,6 +36,8 @@ #undef DEBUG_ECHOLN #undef DEBUG_ECHOPGM #undef DEBUG_ECHOLNPGM +#undef DEBUG_ECHOF +#undef DEBUG_ECHOLNF #undef DEBUG_ECHOPGM_P #undef DEBUG_ECHOLNPGM_P #undef DEBUG_ECHOPAIR_F @@ -54,7 +56,7 @@ #if DEBUG_OUT #include "debug_section.h" - #define DEBUG_SECTION(N,S,D) SectionLog N(PSTR(S),D) + #define DEBUG_SECTION(N,S,D) SectionLog N(F(S),D) #define DEBUG_ECHO_START SERIAL_ECHO_START #define DEBUG_ERROR_START SERIAL_ERROR_START @@ -65,6 +67,8 @@ #define DEBUG_ECHOLN SERIAL_ECHOLN #define DEBUG_ECHOPGM SERIAL_ECHOPGM #define DEBUG_ECHOLNPGM SERIAL_ECHOLNPGM + #define DEBUG_ECHOF SERIAL_ECHOF + #define DEBUG_ECHOLNF SERIAL_ECHOLNF #define DEBUG_ECHOPGM SERIAL_ECHOPGM #define DEBUG_ECHOPGM_P SERIAL_ECHOPGM_P #define DEBUG_ECHOPAIR_F SERIAL_ECHOPAIR_F @@ -94,6 +98,8 @@ #define DEBUG_ECHOLN(...) NOOP #define DEBUG_ECHOPGM(...) NOOP #define DEBUG_ECHOLNPGM(...) NOOP + #define DEBUG_ECHOF(...) NOOP + #define DEBUG_ECHOLNF(...) NOOP #define DEBUG_ECHOPGM_P(...) NOOP #define DEBUG_ECHOLNPGM_P(...) NOOP #define DEBUG_ECHOPAIR_F(...) NOOP diff --git a/Marlin/src/core/debug_section.h b/Marlin/src/core/debug_section.h index ef1511e6f0..6e23d9e4ed 100644 --- a/Marlin/src/core/debug_section.h +++ b/Marlin/src/core/debug_section.h @@ -26,22 +26,22 @@ class SectionLog { public: - SectionLog(PGM_P const msg=nullptr, bool inbug=true) { - the_msg = msg; - if ((debug = inbug)) echo_msg(PSTR(">>>")); + SectionLog(FSTR_P const fmsg=nullptr, bool inbug=true) { + the_msg = fmsg; + if ((debug = inbug)) echo_msg(F(">>>")); } - ~SectionLog() { if (debug) echo_msg(PSTR("<<<")); } + ~SectionLog() { if (debug) echo_msg(F("<<<")); } private: - PGM_P the_msg; + FSTR_P the_msg; bool debug; - void echo_msg(PGM_P const pre) { - SERIAL_ECHOPGM_P(pre); + void echo_msg(FSTR_P const fpre) { + SERIAL_ECHOF(fpre); if (the_msg) { SERIAL_CHAR(' '); - SERIAL_ECHOPGM_P(the_msg); + SERIAL_ECHOF(the_msg); } SERIAL_CHAR(' '); print_pos(current_position); diff --git a/Marlin/src/core/serial.cpp b/Marlin/src/core/serial.cpp index 8c9f4a8e4d..9cd862df70 100644 --- a/Marlin/src/core/serial.cpp +++ b/Marlin/src/core/serial.cpp @@ -69,23 +69,23 @@ PGMSTR(SP_I_LBL, " " AXIS4_STR ":"); PGMSTR(SP_J_LBL, " " AXIS5_STR ":"); PGMSTR #endif -void serialprintPGM(PGM_P str) { +void serial_print_P(PGM_P str) { while (const char c = pgm_read_byte(str++)) SERIAL_CHAR(c); } -void serial_echo_start() { static PGMSTR(echomagic, "echo:"); serialprintPGM(echomagic); } -void serial_error_start() { static PGMSTR(errormagic, "Error:"); serialprintPGM(errormagic); } +void serial_echo_start() { static PGMSTR(echomagic, "echo:"); serial_print_P(echomagic); } +void serial_error_start() { static PGMSTR(errormagic, "Error:"); serial_print_P(errormagic); } void serial_spaces(uint8_t count) { count *= (PROPORTIONAL_FONT_RATIO); while (count--) SERIAL_CHAR(' '); } -void serial_ternary(const bool onoff, PGM_P const pre, PGM_P const on, PGM_P const off, PGM_P const post/*=nullptr*/) { - if (pre) serialprintPGM(pre); - serialprintPGM(onoff ? on : off); - if (post) serialprintPGM(post); +void serial_ternary(const bool onoff, FSTR_P const pre, FSTR_P const on, FSTR_P const off, FSTR_P const post/*=nullptr*/) { + if (pre) serial_print(pre); + serial_print(onoff ? on : off); + if (post) serial_print(post); } -void serialprint_onoff(const bool onoff) { serialprintPGM(onoff ? PSTR(STR_ON) : PSTR(STR_OFF)); } +void serialprint_onoff(const bool onoff) { serial_print(onoff ? F(STR_ON) : F(STR_OFF)); } void serialprintln_onoff(const bool onoff) { serialprint_onoff(onoff); SERIAL_EOL(); } -void serialprint_truefalse(const bool tf) { serialprintPGM(tf ? PSTR("true") : PSTR("false")); } +void serialprint_truefalse(const bool tf) { serial_print(tf ? F("true") : F("false")); } void print_bin(uint16_t val) { for (uint8_t i = 16; i--;) { @@ -94,10 +94,10 @@ void print_bin(uint16_t val) { } } -void print_pos(LINEAR_AXIS_ARGS(const_float_t), PGM_P const prefix/*=nullptr*/, PGM_P const suffix/*=nullptr*/) { - if (prefix) serialprintPGM(prefix); +void print_pos(LINEAR_AXIS_ARGS(const_float_t), FSTR_P const prefix/*=nullptr*/, FSTR_P const suffix/*=nullptr*/) { + if (prefix) serial_print(prefix); SERIAL_ECHOPGM_P( LIST_N(DOUBLE(LINEAR_AXES), SP_X_STR, x, SP_Y_STR, y, SP_Z_STR, z, SP_I_STR, i, SP_J_STR, j, SP_K_STR, k) ); - if (suffix) serialprintPGM(suffix); else SERIAL_EOL(); + if (suffix) serial_print(suffix); else SERIAL_EOL(); } diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h index 05d80a4829..e058f1e5cd 100644 --- a/Marlin/src/core/serial.h +++ b/Marlin/src/core/serial.h @@ -167,13 +167,10 @@ inline void SERIAL_ECHO(serial_char_t x) { SERIAL_IMPL.write(x.c); } #define AS_CHAR(C) serial_char_t(C) #define AS_DIGIT(C) AS_CHAR('0' + (C)) -// SERIAL_ECHO_F prints a floating point value with optional precision -inline void SERIAL_ECHO_F(EnsureDouble x, int digit=2) { SERIAL_IMPL.print(x, digit); } - template void SERIAL_ECHOLN(T x) { SERIAL_IMPL.println(x); } -// SERIAL_PRINT works like SERIAL_ECHO but allow to specify the encoding base of the number printed +// SERIAL_PRINT works like SERIAL_ECHO but also takes the numeric base template void SERIAL_PRINT(T x, U y) { SERIAL_IMPL.print(x, y); } @@ -184,8 +181,20 @@ void SERIAL_PRINTLN(T x, PrintBase y) { SERIAL_IMPL.println(x, y); } inline void SERIAL_FLUSH() { SERIAL_IMPL.flush(); } inline void SERIAL_FLUSHTX() { SERIAL_IMPL.flushTX(); } -// Print a single PROGMEM string to serial -void serialprintPGM(PGM_P str); +// Serial echo and error prefixes +#define SERIAL_ECHO_START() serial_echo_start() +#define SERIAL_ERROR_START() serial_error_start() + +// Serial end-of-line +#define SERIAL_EOL() SERIAL_CHAR('\n') + +// Print a single PROGMEM, PGM_P, or PSTR() string. +void serial_print_P(PGM_P str); +inline void serial_println_P(PGM_P str) { serial_print_P(str); SERIAL_EOL(); } + +// Print a single FSTR_P, F(), or FPSTR() string. +inline void serial_print(FSTR_P const fstr) { serial_print_P(FTOP(fstr)); } +inline void serial_println(FSTR_P const fstr) { serial_println_P(FTOP(fstr)); } // // SERIAL_ECHOPGM... macros are used to output string-value pairs. @@ -195,8 +204,8 @@ void serialprintPGM(PGM_P str); #define __SEP_N(N,V...) _SEP_##N(V) #define _SEP_N(N,V...) __SEP_N(N,V) #define _SEP_N_REF() _SEP_N -#define _SEP_1(s) serialprintPGM(PSTR(s)); -#define _SEP_2(s,v) serial_echopair_PGM(PSTR(s),v); +#define _SEP_1(s) serial_print(F(s)); +#define _SEP_2(s,v) serial_echopair(F(s),v); #define _SEP_3(s,v,V...) _SEP_2(s,v); DEFER2(_SEP_N_REF)()(TWO_ARGS(V),V); #define SERIAL_ECHOPGM(V...) do{ EVAL(_SEP_N(TWO_ARGS(V),V)); }while(0) @@ -204,8 +213,8 @@ void serialprintPGM(PGM_P str); #define __SELP_N(N,V...) _SELP_##N(V) #define _SELP_N(N,V...) __SELP_N(N,V) #define _SELP_N_REF() _SELP_N -#define _SELP_1(s) serialprintPGM(PSTR(s "\n")); -#define _SELP_2(s,v) serial_echopair_PGM(PSTR(s),v); SERIAL_EOL(); +#define _SELP_1(s) serial_print(F(s "\n")); +#define _SELP_2(s,v) serial_echolnpair(F(s),v); #define _SELP_3(s,v,V...) _SEP_2(s,v); DEFER2(_SELP_N_REF)()(TWO_ARGS(V),V); #define SERIAL_ECHOLNPGM(V...) do{ EVAL(_SELP_N(TWO_ARGS(V),V)); }while(0) @@ -213,8 +222,8 @@ void serialprintPGM(PGM_P str); #define __SEP_N_P(N,V...) _SEP_##N##_P(V) #define _SEP_N_P(N,V...) __SEP_N_P(N,V) #define _SEP_N_P_REF() _SEP_N_P -#define _SEP_1_P(p) serialprintPGM(p); -#define _SEP_2_P(p,v) serial_echopair_PGM(p,v); +#define _SEP_1_P(p) serial_print_P(p); +#define _SEP_2_P(p,v) serial_echopair_P(p,v); #define _SEP_3_P(p,v,V...) _SEP_2_P(p,v); DEFER2(_SEP_N_P_REF)()(TWO_ARGS(V),V); #define SERIAL_ECHOPGM_P(V...) do{ EVAL(_SEP_N_P(TWO_ARGS(V),V)); }while(0) @@ -222,11 +231,29 @@ void serialprintPGM(PGM_P str); #define __SELP_N_P(N,V...) _SELP_##N##_P(V) #define _SELP_N_P(N,V...) __SELP_N_P(N,V) #define _SELP_N_P_REF() _SELP_N_P -#define _SELP_1_P(p) { serialprintPGM(p); SERIAL_EOL(); } -#define _SELP_2_P(p,v) { serial_echopair_PGM(p,v); SERIAL_EOL(); } +#define _SELP_1_P(p) serial_println_P(p) +#define _SELP_2_P(p,v) serial_echolnpair_P(p,v) #define _SELP_3_P(p,v,V...) { _SEP_2_P(p,v); DEFER2(_SELP_N_P_REF)()(TWO_ARGS(V),V); } #define SERIAL_ECHOLNPGM_P(V...) do{ EVAL(_SELP_N_P(TWO_ARGS(V),V)); }while(0) +// Print up to 20 pairs of values. Odd elements must be FSTR_P, F(), or FPSTR(). +#define __SEP_N_F(N,V...) _SEP_##N##_F(V) +#define _SEP_N_F(N,V...) __SEP_N_F(N,V) +#define _SEP_N_F_REF() _SEP_N_F +#define _SEP_1_F(p) serial_print(p); +#define _SEP_2_F(p,v) serial_echopair(p,v); +#define _SEP_3_F(p,v,V...) _SEP_2_F(p,v); DEFER2(_SEP_N_F_REF)()(TWO_ARGS(V),V); +#define SERIAL_ECHOF(V...) do{ EVAL(_SEP_N_F(TWO_ARGS(V),V)); }while(0) + +// Print up to 20 pairs of values followed by newline. Odd elements must be FSTR_P, F(), or FPSTR(). +#define __SELP_N_F(N,V...) _SELP_##N##_F(V) +#define _SELP_N_F(N,V...) __SELP_N_F(N,V) +#define _SELP_N_F_REF() _SELP_N_F +#define _SELP_1_F(p) serial_println(p) +#define _SELP_2_F(p,v) serial_echolnpair(p,v) +#define _SELP_3_F(p,v,V...) { _SEP_2_F(p,v); DEFER2(_SELP_N_F_REF)()(TWO_ARGS(V),V); } +#define SERIAL_ECHOLNF(V...) do{ EVAL(_SELP_N_F(TWO_ARGS(V),V)); }while(0) + #ifdef AllowDifferentTypeInList inline void SERIAL_ECHOLIST_IMPL() {} @@ -236,47 +263,49 @@ void serialprintPGM(PGM_P str); template void SERIAL_ECHOLIST_IMPL(T && t, Args && ... args) { SERIAL_IMPL.print(t); - serialprintPGM(PSTR(", ")); + serial_print(F(", ")); SERIAL_ECHOLIST_IMPL(args...); } template - void SERIAL_ECHOLIST(PGM_P const str, Args && ... args) { - SERIAL_IMPL.print(str); + void SERIAL_ECHOLIST(FSTR_P const str, Args && ... args) { + SERIAL_IMPL.print(FTOP(str)); SERIAL_ECHOLIST_IMPL(args...); } #else // Optimization if the listed type are all the same (seems to be the case in the codebase so use that instead) template - void SERIAL_ECHOLIST(PGM_P const str, Args && ... args) { - serialprintPGM(str); + void SERIAL_ECHOLIST(FSTR_P const fstr, Args && ... args) { + serial_print(fstr); typename Private::first_type_of::type values[] = { args... }; constexpr size_t argsSize = sizeof...(args); for (size_t i = 0; i < argsSize; i++) { - if (i) serialprintPGM(PSTR(", ")); + if (i) serial_print(F(", ")); SERIAL_IMPL.print(values[i]); } } #endif -#define SERIAL_ECHOPAIR_F_P(P,V...) do{ serialprintPGM(P); SERIAL_ECHO_F(V); }while(0) -#define SERIAL_ECHOLNPAIR_F_P(V...) do{ SERIAL_ECHOPAIR_F_P(V); SERIAL_EOL(); }while(0) +// SERIAL_ECHO_F prints a floating point value with optional precision +inline void SERIAL_ECHO_F(EnsureDouble x, int digit=2) { SERIAL_IMPL.print(x, digit); } -#define SERIAL_ECHOPAIR_F(S,V...) SERIAL_ECHOPAIR_F_P(PSTR(S),V) -#define SERIAL_ECHOLNPAIR_F(V...) do{ SERIAL_ECHOPAIR_F(V); SERIAL_EOL(); }while(0) +#define SERIAL_ECHOPAIR_F_P(P,V...) do{ serial_print_P(P); SERIAL_ECHO_F(V); }while(0) +#define SERIAL_ECHOLNPAIR_F_P(P,V...) do{ SERIAL_ECHOPAIR_F_P(P,V); SERIAL_EOL(); }while(0) -#define SERIAL_ECHO_START() serial_echo_start() -#define SERIAL_ERROR_START() serial_error_start() -#define SERIAL_EOL() SERIAL_CHAR('\n') +#define SERIAL_ECHOPAIR_F_F(S,V...) do{ serial_print(S); SERIAL_ECHO_F(V); }while(0) +#define SERIAL_ECHOLNPAIR_F_F(S,V...) do{ SERIAL_ECHOPAIR_F_F(S,V); SERIAL_EOL(); }while(0) -#define SERIAL_ECHO_MSG(V...) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(V); }while(0) -#define SERIAL_ERROR_MSG(V...) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(V); }while(0) +#define SERIAL_ECHOPAIR_F(S,V...) SERIAL_ECHOPAIR_F_F(F(S),V) +#define SERIAL_ECHOLNPAIR_F(V...) do{ SERIAL_ECHOPAIR_F(V); SERIAL_EOL(); }while(0) -#define SERIAL_ECHO_SP(C) serial_spaces(C) +#define SERIAL_ECHO_MSG(V...) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(V); }while(0) +#define SERIAL_ERROR_MSG(V...) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(V); }while(0) -#define SERIAL_ECHO_TERNARY(TF, PRE, ON, OFF, POST) serial_ternary(TF, PSTR(PRE), PSTR(ON), PSTR(OFF), PSTR(POST)) +#define SERIAL_ECHO_SP(C) serial_spaces(C) + +#define SERIAL_ECHO_TERNARY(TF, PRE, ON, OFF, POST) serial_ternary(TF, F(PRE), F(ON), F(OFF), F(POST)) #if SERIAL_FLOAT_PRECISION #define SERIAL_DECIMAL(V) SERIAL_PRINT(V, SERIAL_FLOAT_PRECISION) @@ -287,33 +316,42 @@ void serialprintPGM(PGM_P str); // // Functions for serial printing from PROGMEM. (Saves loads of SRAM.) // -inline void serial_echopair_PGM(PGM_P const s_P, serial_char_t v) { serialprintPGM(s_P); SERIAL_CHAR(v.c); } - -inline void serial_echopair_PGM(PGM_P const s_P, float v) { serialprintPGM(s_P); SERIAL_DECIMAL(v); } -inline void serial_echopair_PGM(PGM_P const s_P, double v) { serialprintPGM(s_P); SERIAL_DECIMAL(v); } -inline void serial_echopair_PGM(PGM_P const s_P, const char *v) { serialprintPGM(s_P); SERIAL_ECHO(v); } +inline void serial_echopair_P(PGM_P const pstr, serial_char_t v) { serial_print_P(pstr); SERIAL_CHAR(v.c); } +inline void serial_echopair_P(PGM_P const pstr, float v) { serial_print_P(pstr); SERIAL_DECIMAL(v); } +inline void serial_echopair_P(PGM_P const pstr, double v) { serial_print_P(pstr); SERIAL_DECIMAL(v); } +//inline void serial_echopair_P(PGM_P const pstr, const char *v) { serial_print_P(pstr); SERIAL_ECHO(v); } +inline void serial_echopair_P(PGM_P const pstr, FSTR_P v) { serial_print_P(pstr); SERIAL_ECHOF(v); } // Default implementation for types without a specialization. Handles integers. template -void serial_echopair_PGM(PGM_P const s_P, T v) { serialprintPGM(s_P); SERIAL_ECHO(v); } +inline void serial_echopair_P(PGM_P const pstr, T v) { serial_print_P(pstr); SERIAL_ECHO(v); } -inline void serial_echopair_PGM(PGM_P const s_P, bool v) { serial_echopair_PGM(s_P, (int)v); } -inline void serial_echopair_PGM(PGM_P const s_P, void *v) { serial_echopair_PGM(s_P, (uintptr_t)v); } +// Add a newline. +template +inline void serial_echolnpair_P(PGM_P const pstr, T v) { serial_echopair_P(pstr, v); SERIAL_EOL(); } + +// Catch-all for __FlashStringHelper * +template +inline void serial_echopair(FSTR_P const fstr, T v) { serial_echopair_P(FTOP(fstr), v); } + +// Add a newline to the serial output +template +inline void serial_echolnpair(FSTR_P const fstr, T v) { serial_echolnpair_P(FTOP(fstr), v); } void serial_echo_start(); void serial_error_start(); -void serial_ternary(const bool onoff, PGM_P const pre, PGM_P const on, PGM_P const off, PGM_P const post=nullptr); +void serial_ternary(const bool onoff, FSTR_P const pre, FSTR_P const on, FSTR_P const off, FSTR_P const post=nullptr); void serialprint_onoff(const bool onoff); void serialprintln_onoff(const bool onoff); void serialprint_truefalse(const bool tf); void serial_spaces(uint8_t count); void print_bin(const uint16_t val); -void print_pos(LINEAR_AXIS_ARGS(const_float_t), PGM_P const prefix=nullptr, PGM_P const suffix=nullptr); +void print_pos(LINEAR_AXIS_ARGS(const_float_t), FSTR_P const prefix=nullptr, FSTR_P const suffix=nullptr); -inline void print_pos(const xyz_pos_t &xyz, PGM_P const prefix=nullptr, PGM_P const suffix=nullptr) { +inline void print_pos(const xyz_pos_t &xyz, FSTR_P const prefix=nullptr, FSTR_P const suffix=nullptr) { print_pos(LINEAR_AXIS_ELEM(xyz), prefix, suffix); } -#define SERIAL_POS(SUFFIX,VAR) do { print_pos(VAR, PSTR(" " STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n")); }while(0) -#define SERIAL_XYZ(PREFIX,V...) do { print_pos(V, PSTR(PREFIX), nullptr); }while(0) +#define SERIAL_POS(SUFFIX,VAR) do { print_pos(VAR, F(" " STRINGIFY(VAR) "="), F(" : " SUFFIX "\n")); }while(0) +#define SERIAL_XYZ(PREFIX,V...) do { print_pos(V, F(PREFIX)); }while(0) diff --git a/Marlin/src/core/utility.cpp b/Marlin/src/core/utility.cpp index 8aeec89f02..b70e2fa9a9 100644 --- a/Marlin/src/core/utility.cpp +++ b/Marlin/src/core/utility.cpp @@ -92,9 +92,9 @@ void safe_delay(millis_t ms) { SERIAL_ECHOPGM(" (Aligned With"); if (probe.offset_xy.y > 0) - SERIAL_ECHOPGM_P(ENABLED(IS_SCARA) ? PSTR("-Distal") : PSTR("-Back")); + SERIAL_ECHOF(F(TERN(IS_SCARA, "-Distal", "-Back"))); else if (probe.offset_xy.y < 0) - SERIAL_ECHOPGM_P(ENABLED(IS_SCARA) ? PSTR("-Proximal") : PSTR("-Front")); + SERIAL_ECHOF(F(TERN(IS_SCARA, "-Proximal", "-Front"))); else if (probe.offset_xy.x != 0) SERIAL_ECHOPGM("-Center"); @@ -102,7 +102,7 @@ void safe_delay(millis_t ms) { #endif - SERIAL_ECHOPGM_P(probe.offset.z < 0 ? PSTR("Below") : probe.offset.z > 0 ? PSTR("Above") : PSTR("Same Z as")); + SERIAL_ECHOF(probe.offset.z < 0 ? F("Below") : probe.offset.z > 0 ? F("Above") : F("Same Z as")); SERIAL_ECHOLNPGM(" Nozzle)"); #endif diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.cpp b/Marlin/src/feature/bedlevel/ubl/ubl.cpp index 7b2280fcde..964f1123fe 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl.cpp @@ -180,10 +180,8 @@ void unified_bed_leveling::display_map(const uint8_t map_type) { SERIAL_EOL(); serial_echo_column_labels(eachsp - 2); } - else { - SERIAL_ECHOPGM(" for "); - SERIAL_ECHOPGM_P(csv ? PSTR("CSV:\n") : PSTR("LCD:\n")); - } + else + SERIAL_ECHOPGM(" for ", csv ? F("CSV:\n") : F("LCD:\n")); // Add XY probe offset from extruder because probe.probe_at_point() subtracts them when // moving to the XY position to be measured. This ensures better agreement between @@ -213,7 +211,7 @@ void unified_bed_leveling::display_map(const uint8_t map_type) { // TODO: Display on Graphical LCD } else if (isnan(f)) - SERIAL_ECHOPGM_P(human ? PSTR(" . ") : PSTR("NAN")); + SERIAL_ECHOF(human ? F(" . ") : F("NAN")); else if (human || csv) { if (human && f >= 0.0) SERIAL_CHAR(f > 0 ? '+' : ' '); // Display sign also for positive numbers (' ' for 0) SERIAL_ECHO_F(f, 3); // Positive: 5 digits, Negative: 6 digits diff --git a/Marlin/src/feature/encoder_i2c.cpp b/Marlin/src/feature/encoder_i2c.cpp index bed24f0525..f843011b5d 100644 --- a/Marlin/src/feature/encoder_i2c.cpp +++ b/Marlin/src/feature/encoder_i2c.cpp @@ -232,7 +232,7 @@ bool I2CPositionEncoder::passes_test(const bool report) { if (report) { if (H != I2CPE_MAG_SIG_GOOD) SERIAL_ECHOPGM("Warning. "); SERIAL_CHAR(axis_codes[encoderAxis]); - serial_ternary(H == I2CPE_MAG_SIG_BAD, PSTR(" axis "), PSTR("magnetic strip "), PSTR("encoder ")); + serial_ternary(H == I2CPE_MAG_SIG_BAD, F(" axis "), F("magnetic strip "), F("encoder ")); switch (H) { case I2CPE_MAG_SIG_GOOD: case I2CPE_MAG_SIG_MID: diff --git a/Marlin/src/feature/meatpack.cpp b/Marlin/src/feature/meatpack.cpp index 2edcd7478a..b2899243b2 100644 --- a/Marlin/src/feature/meatpack.cpp +++ b/Marlin/src/feature/meatpack.cpp @@ -169,10 +169,9 @@ void MeatPack::handle_command(const MeatPack_Command c) { void MeatPack::report_state() { // NOTE: if any configuration vars are added below, the outgoing sync text for host plugin // should not contain the "PV' substring, as this is used to indicate protocol version - SERIAL_ECHOPGM("[MP] "); - SERIAL_ECHOPGM(MeatPack_ProtocolVersion " "); + SERIAL_ECHOPGM("[MP] " MeatPack_ProtocolVersion " "); serialprint_onoff(TEST(state, MPConfig_Bit_Active)); - SERIAL_ECHOPGM_P(TEST(state, MPConfig_Bit_NoSpaces) ? PSTR(" NSP\n") : PSTR(" ESP\n")); + SERIAL_ECHOF(TEST(state, MPConfig_Bit_NoSpaces) ? F(" NSP\n") : F(" ESP\n")); } /** diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp index d54326116e..28f5caa3cb 100644 --- a/Marlin/src/feature/pause.cpp +++ b/Marlin/src/feature/pause.cpp @@ -486,7 +486,7 @@ void show_continue_prompt(const bool is_reload) { ui.pause_show_message(is_reload ? PAUSE_MESSAGE_INSERT : PAUSE_MESSAGE_WAITING); SERIAL_ECHO_START(); - SERIAL_ECHOPGM_P(is_reload ? PSTR(_PMSG(STR_FILAMENT_CHANGE_INSERT) "\n") : PSTR(_PMSG(STR_FILAMENT_CHANGE_WAIT) "\n")); + SERIAL_ECHOF(is_reload ? F(_PMSG(STR_FILAMENT_CHANGE_INSERT) "\n") : F(_PMSG(STR_FILAMENT_CHANGE_WAIT) "\n")); } void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep_count/*=0*/ DXC_ARGS) { diff --git a/Marlin/src/feature/probe_temp_comp.cpp b/Marlin/src/feature/probe_temp_comp.cpp index 68984fe756..05b204ae6b 100644 --- a/Marlin/src/feature/probe_temp_comp.cpp +++ b/Marlin/src/feature/probe_temp_comp.cpp @@ -69,11 +69,11 @@ void ProbeTempComp::print_offsets() { LOOP_L_N(s, TSI_COUNT) { celsius_t temp = cali_info[s].start_temp; for (int16_t i = -1; i < cali_info[s].measurements; ++i) { - SERIAL_ECHOPGM_P(s == TSI_BED ? PSTR("Bed") : + SERIAL_ECHOF(s == TSI_BED ? F("Bed") : #if ENABLED(USE_TEMP_EXT_COMPENSATION) - s == TSI_EXT ? PSTR("Extruder") : + s == TSI_EXT ? F("Extruder") : #endif - PSTR("Probe") + F("Probe") ); SERIAL_ECHOLNPGM( " temp: ", temp, diff --git a/Marlin/src/feature/runout.h b/Marlin/src/feature/runout.h index 918e65bb22..8065e51555 100644 --- a/Marlin/src/feature/runout.h +++ b/Marlin/src/feature/runout.h @@ -317,7 +317,7 @@ class FilamentSensorBase { static uint8_t was_out; // = 0 if (out != TEST(was_out, s)) { TBI(was_out, s); - SERIAL_ECHOLNPGM_P(PSTR("Filament Sensor "), '0' + s, out ? PSTR(" OUT") : PSTR(" IN")); + SERIAL_ECHOLNF(F("Filament Sensor "), AS_DIGIT(s), out ? F(" OUT") : F(" IN")); } #endif } @@ -352,7 +352,7 @@ class FilamentSensorBase { if (ELAPSED(ms, t)) { t = millis() + 1000UL; LOOP_L_N(i, NUM_RUNOUT_SENSORS) - SERIAL_ECHOPGM_P(i ? PSTR(", ") : PSTR("Remaining mm: "), runout_mm_countdown[i]); + SERIAL_ECHOF(i ? F(", ") : F("Remaining mm: "), runout_mm_countdown[i]); SERIAL_EOL(); } #endif diff --git a/Marlin/src/feature/tmc_util.cpp b/Marlin/src/feature/tmc_util.cpp index 97fedf13c5..6848d81003 100644 --- a/Marlin/src/feature/tmc_util.cpp +++ b/Marlin/src/feature/tmc_util.cpp @@ -561,7 +561,7 @@ }; template - static void print_vsense(TMC &st) { SERIAL_ECHOPGM_P(st.vsense() ? PSTR("1=.18") : PSTR("0=.325")); } + static void print_vsense(TMC &st) { SERIAL_ECHOF(st.vsense() ? F("1=.18") : F("0=.325")); } #if HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC5130) static void _tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) { @@ -732,7 +732,7 @@ SERIAL_ECHO(st.cs()); SERIAL_ECHOPGM("/31"); break; - case TMC_VSENSE: SERIAL_ECHOPGM_P(st.vsense() ? PSTR("1=.165") : PSTR("0=.310")); break; + case TMC_VSENSE: SERIAL_ECHOF(st.vsense() ? F("1=.165") : F("0=.310")); break; case TMC_MICROSTEPS: SERIAL_ECHO(st.microsteps()); break; //case TMC_OTPW: serialprint_truefalse(st.otpw()); break; //case TMC_OTPW_TRIGGERED: serialprint_truefalse(st.getOTPW()); break; @@ -1256,15 +1256,14 @@ static bool test_connection(TMC &st) { if (test_result > 0) SERIAL_ECHOPGM("Error: All "); - const char *stat; + FSTR_P stat; switch (test_result) { default: - case 0: stat = PSTR("OK"); break; - case 1: stat = PSTR("HIGH"); break; - case 2: stat = PSTR("LOW"); break; + case 0: stat = F("OK"); break; + case 1: stat = F("HIGH"); break; + case 2: stat = F("LOW"); break; } - SERIAL_ECHOPGM_P(stat); - SERIAL_EOL(); + SERIAL_ECHOLNF(stat); return test_result; } diff --git a/Marlin/src/gcode/bedlevel/G35.cpp b/Marlin/src/gcode/bedlevel/G35.cpp index cb634d973b..e45e18b7fb 100644 --- a/Marlin/src/gcode/bedlevel/G35.cpp +++ b/Marlin/src/gcode/bedlevel/G35.cpp @@ -116,7 +116,7 @@ void GcodeSuite::G35() { if (DEBUGGING(LEVELING)) { DEBUG_ECHOPGM("Probing point ", i + 1, " ("); - DEBUG_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i])); + DEBUG_ECHOF(FPSTR(pgm_read_ptr(&tramming_point_name[i]))); DEBUG_CHAR(')'); DEBUG_ECHOLNPGM_P(SP_X_STR, tramming_points[i].x, SP_Y_STR, tramming_points[i].y, SP_Z_STR, z_probed_height); } diff --git a/Marlin/src/gcode/bedlevel/M420.cpp b/Marlin/src/gcode/bedlevel/M420.cpp index d76e08dee6..1240b14fd2 100644 --- a/Marlin/src/gcode/bedlevel/M420.cpp +++ b/Marlin/src/gcode/bedlevel/M420.cpp @@ -246,12 +246,12 @@ void GcodeSuite::M420_report(const bool forReplay/*=true*/) { report_heading_etc(forReplay, PSTR( TERN(MESH_BED_LEVELING, "Mesh Bed Leveling", TERN(AUTO_BED_LEVELING_UBL, "Unified Bed Leveling", "Auto Bed Leveling")) )); - SERIAL_ECHOPGM_P( - PSTR(" M420 S"), planner.leveling_active + SERIAL_ECHOF( + F(" M420 S"), planner.leveling_active #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - , SP_Z_STR, LINEAR_UNIT(planner.z_fade_height) + , FPSTR(SP_Z_STR), LINEAR_UNIT(planner.z_fade_height) #endif - , PSTR(" ; Leveling ") + , F(" ; Leveling ") ); serialprintln_onoff(planner.leveling_active); } diff --git a/Marlin/src/gcode/config/M217.cpp b/Marlin/src/gcode/config/M217.cpp index 923a27d7df..1299259b53 100644 --- a/Marlin/src/gcode/config/M217.cpp +++ b/Marlin/src/gcode/config/M217.cpp @@ -138,8 +138,8 @@ void GcodeSuite::M217_report(const bool forReplay/*=true*/) { #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) SERIAL_ECHOPGM(" S", LINEAR_UNIT(toolchange_settings.swap_length)); SERIAL_ECHOPGM_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume), - SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime), - SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed)); + SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime), + SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed)); SERIAL_ECHOPGM(" R", LINEAR_UNIT(toolchange_settings.retract_speed), " U", LINEAR_UNIT(toolchange_settings.unretract_speed), " F", toolchange_settings.fan_speed, diff --git a/Marlin/src/gcode/config/M302.cpp b/Marlin/src/gcode/config/M302.cpp index 57c049e194..e271dcd469 100644 --- a/Marlin/src/gcode/config/M302.cpp +++ b/Marlin/src/gcode/config/M302.cpp @@ -55,7 +55,7 @@ void GcodeSuite::M302() { // Report current state SERIAL_ECHO_START(); SERIAL_ECHOPGM("Cold extrudes are "); - SERIAL_ECHOPGM_P(thermalManager.allow_cold_extrude ? PSTR("en") : PSTR("dis")); + SERIAL_ECHOF(thermalManager.allow_cold_extrude ? F("en") : F("dis")); SERIAL_ECHOLNPGM("abled (min temp ", thermalManager.extrude_min_temp, "C)"); } } diff --git a/Marlin/src/gcode/control/M211.cpp b/Marlin/src/gcode/control/M211.cpp index a837d79533..d108070279 100644 --- a/Marlin/src/gcode/control/M211.cpp +++ b/Marlin/src/gcode/control/M211.cpp @@ -47,8 +47,8 @@ void GcodeSuite::M211_report(const bool forReplay/*=true*/) { report_echo_start(forReplay); const xyz_pos_t l_soft_min = soft_endstop.min.asLogical(), l_soft_max = soft_endstop.max.asLogical(); - print_pos(l_soft_min, PSTR(STR_SOFT_MIN), PSTR(" ")); - print_pos(l_soft_max, PSTR(STR_SOFT_MAX)); + print_pos(l_soft_min, F(STR_SOFT_MIN), F(" ")); + print_pos(l_soft_max, F(STR_SOFT_MAX)); } #endif // HAS_SOFTWARE_ENDSTOPS diff --git a/Marlin/src/gcode/control/M80_M81.cpp b/Marlin/src/gcode/control/M80_M81.cpp index 149613ee15..c11acb4380 100644 --- a/Marlin/src/gcode/control/M80_M81.cpp +++ b/Marlin/src/gcode/control/M80_M81.cpp @@ -48,7 +48,7 @@ // S: Report the current power supply state and exit if (parser.seen('S')) { - SERIAL_ECHOPGM_P(powerManager.psu_on ? PSTR("PS:1\n") : PSTR("PS:0\n")); + SERIAL_ECHOF(powerManager.psu_on ? F("PS:1\n") : F("PS:0\n")); return; } diff --git a/Marlin/src/gcode/feature/L6470/M122.cpp b/Marlin/src/gcode/feature/L6470/M122.cpp index 1e5b37e4b7..4a5629b049 100644 --- a/Marlin/src/gcode/feature/L6470/M122.cpp +++ b/Marlin/src/gcode/feature/L6470/M122.cpp @@ -47,10 +47,10 @@ inline void L6470_say_status(const L64XX_axis_t axis) { } #endif SERIAL_ECHOPGM("\n...OUTPUT: "); - SERIAL_ECHOPGM_P(sh.STATUS_AXIS & STATUS_HIZ ? PSTR("OFF") : PSTR("ON ")); + SERIAL_ECHOF(sh.STATUS_AXIS & STATUS_HIZ ? F("OFF") : F("ON ")); SERIAL_ECHOPGM(" BUSY: "); echo_yes_no((sh.STATUS_AXIS & STATUS_BUSY) == 0); SERIAL_ECHOPGM(" DIR: "); - SERIAL_ECHOPGM_P((((sh.STATUS_AXIS & STATUS_DIR) >> 4) ^ L64xxManager.index_to_dir[axis]) ? PSTR("FORWARD") : PSTR("REVERSE")); + SERIAL_ECHOF((((sh.STATUS_AXIS & STATUS_DIR) >> 4) ^ L64xxManager.index_to_dir[axis]) ? F("FORWARD") : F("REVERSE")); if (sh.STATUS_AXIS_LAYOUT == L6480_STATUS_LAYOUT) { SERIAL_ECHOPGM(" Last Command: "); if (sh.STATUS_AXIS & sh.STATUS_AXIS_WRONG_CMD) SERIAL_ECHOPGM("VALID"); @@ -67,7 +67,7 @@ inline void L6470_say_status(const L64XX_axis_t axis) { SERIAL_ECHOPGM(" Last Command: "); if (!(sh.STATUS_AXIS & sh.STATUS_AXIS_WRONG_CMD)) SERIAL_ECHOPGM("IN"); SERIAL_ECHOPGM("VALID "); - SERIAL_ECHOPGM_P(sh.STATUS_AXIS & sh.STATUS_AXIS_NOTPERF_CMD ? PSTR("COMPLETED ") : PSTR("Not PERFORMED")); + SERIAL_ECHOF(sh.STATUS_AXIS & sh.STATUS_AXIS_NOTPERF_CMD ? F("COMPLETED ") : F("Not PERFORMED")); SERIAL_ECHOPGM("\n...THERMAL: ", !(sh.STATUS_AXIS & sh.STATUS_AXIS_TH_SD) ? "SHUTDOWN " : !(sh.STATUS_AXIS & sh.STATUS_AXIS_TH_WRN) ? "WARNING " : "OK "); } SERIAL_ECHOPGM(" OVERCURRENT:"); echo_yes_no((sh.STATUS_AXIS & sh.STATUS_AXIS_OCD) == 0); diff --git a/Marlin/src/gcode/feature/L6470/M906.cpp b/Marlin/src/gcode/feature/L6470/M906.cpp index 2ab13f5b5d..a74365e84d 100644 --- a/Marlin/src/gcode/feature/L6470/M906.cpp +++ b/Marlin/src/gcode/feature/L6470/M906.cpp @@ -107,7 +107,7 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) { SERIAL_ECHOPGM("...MicroSteps: ", MicroSteps, " ADC_OUT: ", L6470_ADC_out); SERIAL_ECHOPGM(" Vs_compensation: "); - SERIAL_ECHOPGM_P((motor.GetParam(sh.L6470_AXIS_CONFIG) & CONFIG_EN_VSCOMP) ? PSTR("ENABLED ") : PSTR("DISABLED")); + SERIAL_ECHOF((motor.GetParam(sh.L6470_AXIS_CONFIG) & CONFIG_EN_VSCOMP) ? F("ENABLED ") : F("DISABLED")); SERIAL_ECHOLNPGM(" Compensation coefficient: ~", comp_coef * 0.01f); SERIAL_ECHOPGM("...KVAL_HOLD: ", motor.GetParam(L6470_KVAL_HOLD), diff --git a/Marlin/src/gcode/feature/powerloss/M413.cpp b/Marlin/src/gcode/feature/powerloss/M413.cpp index 7c714dad25..9bf109559f 100644 --- a/Marlin/src/gcode/feature/powerloss/M413.cpp +++ b/Marlin/src/gcode/feature/powerloss/M413.cpp @@ -51,8 +51,8 @@ void GcodeSuite::M413() { #if PIN_EXISTS(POWER_LOSS) if (parser.seen_test('O')) recovery._outage(); #endif - if (parser.seen_test('E')) SERIAL_ECHOPGM_P(recovery.exists() ? PSTR("PLR Exists\n") : PSTR("No PLR\n")); - if (parser.seen_test('V')) SERIAL_ECHOPGM_P(recovery.valid() ? PSTR("Valid\n") : PSTR("Invalid\n")); + if (parser.seen_test('E')) SERIAL_ECHOF(recovery.exists() ? F("PLR Exists\n") : F("No PLR\n")); + if (parser.seen_test('V')) SERIAL_ECHOF(recovery.valid() ? F("Valid\n") : F("Invalid\n")); #endif } diff --git a/Marlin/src/gcode/feature/trinamic/M569.cpp b/Marlin/src/gcode/feature/trinamic/M569.cpp index 5cadd2d45e..e8e3205358 100644 --- a/Marlin/src/gcode/feature/trinamic/M569.cpp +++ b/Marlin/src/gcode/feature/trinamic/M569.cpp @@ -32,7 +32,7 @@ template void tmc_say_stealth_status(TMC &st) { st.printLabel(); SERIAL_ECHOPGM(" driver mode:\t"); - SERIAL_ECHOLNPGM_P(st.get_stealthChop() ? PSTR("stealthChop") : PSTR("spreadCycle")); + SERIAL_ECHOLNF(st.get_stealthChop() ? F("stealthChop") : F("spreadCycle")); } template void tmc_set_stealthChop(TMC &st, const bool enable) { diff --git a/Marlin/src/gcode/geometry/G17-G19.cpp b/Marlin/src/gcode/geometry/G17-G19.cpp index 0154598ccb..fbac7470ca 100644 --- a/Marlin/src/gcode/geometry/G17-G19.cpp +++ b/Marlin/src/gcode/geometry/G17-G19.cpp @@ -29,10 +29,10 @@ inline void report_workspace_plane() { SERIAL_ECHO_START(); SERIAL_ECHOPGM("Workspace Plane "); - SERIAL_ECHOPGM_P( - gcode.workspace_plane == GcodeSuite::PLANE_YZ ? PSTR("YZ\n") - : gcode.workspace_plane == GcodeSuite::PLANE_ZX ? PSTR("ZX\n") - : PSTR("XY\n") + SERIAL_ECHOF( + gcode.workspace_plane == GcodeSuite::PLANE_YZ ? F("YZ\n") + : gcode.workspace_plane == GcodeSuite::PLANE_ZX ? F("ZX\n") + : F("XY\n") ); } diff --git a/Marlin/src/gcode/parser.h b/Marlin/src/gcode/parser.h index ad550765ec..83fda54836 100644 --- a/Marlin/src/gcode/parser.h +++ b/Marlin/src/gcode/parser.h @@ -351,8 +351,8 @@ public: static inline char temp_units_code() { return input_temp_units == TEMPUNIT_K ? 'K' : input_temp_units == TEMPUNIT_F ? 'F' : 'C'; } - static inline PGM_P temp_units_name() { - return input_temp_units == TEMPUNIT_K ? PSTR("Kelvin") : input_temp_units == TEMPUNIT_F ? PSTR("Fahrenheit") : PSTR("Celsius"); + static inline FSTR_P temp_units_name() { + return input_temp_units == TEMPUNIT_K ? F("Kelvin") : input_temp_units == TEMPUNIT_F ? F("Fahrenheit") : F("Celsius"); } #if HAS_LCD_MENU && DISABLED(DISABLE_M503) diff --git a/Marlin/src/gcode/units/M149.cpp b/Marlin/src/gcode/units/M149.cpp index 20b3781ead..b1cfbb2511 100644 --- a/Marlin/src/gcode/units/M149.cpp +++ b/Marlin/src/gcode/units/M149.cpp @@ -39,7 +39,7 @@ void GcodeSuite::M149() { void GcodeSuite::M149_report(const bool forReplay/*=true*/) { report_heading_etc(forReplay, PSTR(STR_TEMPERATURE_UNITS)); SERIAL_ECHOPGM(" M149 ", AS_CHAR(parser.temp_units_code()), " ; Units in "); - SERIAL_ECHOLNPGM_P(parser.temp_units_name()); + SERIAL_ECHOLNF(parser.temp_units_name()); } #endif // TEMPERATURE_UNITS_SUPPORT diff --git a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp index 1b572367f2..e7b3941928 100644 --- a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp +++ b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp @@ -306,7 +306,7 @@ void ChironTFT::PowerLossRecovery() { printer_state = AC_printer_resuming_from_power_outage; // Play tune to notify user we can recover. last_error = AC_error_powerloss; PlayTune(BEEPER_PIN, SOS, 1); - SERIAL_ECHOLNPGM_P(AC_msg_powerloss_recovery); + SERIAL_ECHOLNF(AC_msg_powerloss_recovery); } void ChironTFT::PrintComplete() { @@ -488,7 +488,7 @@ void ChironTFT::ProcessPanelRequest() { if (tpos != -1) { if (panel_command[tpos+1]== 'X' && panel_command[tpos+2]=='Y') { panel_type = AC_panel_standard; - SERIAL_ECHOLNPGM_P(AC_msg_old_panel_detected); + SERIAL_ECHOLNF(AC_msg_old_panel_detected); } } else { @@ -496,7 +496,7 @@ void ChironTFT::ProcessPanelRequest() { if (tpos != -1) { if (panel_command[tpos+1]== '0' && panel_command[tpos+2]==']') { panel_type = AC_panel_new; - SERIAL_ECHOLNPGM_P(AC_msg_new_panel_detected); + SERIAL_ECHOLNF(AC_msg_new_panel_detected); } } } @@ -825,7 +825,7 @@ void ChironTFT::PanelProcess(uint8_t req) { if (!isPrinting()) { injectCommands_P(PSTR("M501\nM420 S1")); selectedmeshpoint.x = selectedmeshpoint.y = 99; - SERIAL_ECHOLNPGM_P(AC_msg_mesh_changes_abandoned); + SERIAL_ECHOLNF(AC_msg_mesh_changes_abandoned); } } @@ -833,7 +833,7 @@ void ChironTFT::PanelProcess(uint8_t req) { if (!isPrinting()) { setAxisPosition_mm(1.0,Z); // Lift nozzle before any further movements are made injectCommands_P(PSTR("M500")); - SERIAL_ECHOLNPGM_P(AC_msg_mesh_changes_saved); + SERIAL_ECHOLNF(AC_msg_mesh_changes_saved); selectedmeshpoint.x = selectedmeshpoint.y = 99; } } diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index d59ebe5695..fbf8481c03 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -755,10 +755,10 @@ volatile bool Temperature::raw_temps_ready = false; SERIAL_ECHOLNPGM(STR_PID_AUTOTUNE_FINISHED); #if EITHER(PIDTEMPBED, PIDTEMPCHAMBER) - PGM_P const estring = GHV(PSTR("chamber"), PSTR("bed"), NUL_STR); - say_default_(); SERIAL_ECHOPGM_P(estring); SERIAL_ECHOLNPGM("Kp ", tune_pid.Kp); - say_default_(); SERIAL_ECHOPGM_P(estring); SERIAL_ECHOLNPGM("Ki ", tune_pid.Ki); - say_default_(); SERIAL_ECHOPGM_P(estring); SERIAL_ECHOLNPGM("Kd ", tune_pid.Kd); + FSTR_P const estring = GHV(F("chamber"), F("bed"), FPSTR(NUL_STR)); + say_default_(); SERIAL_ECHOF(estring); SERIAL_ECHOLNPGM("Kp ", tune_pid.Kp); + say_default_(); SERIAL_ECHOF(estring); SERIAL_ECHOLNPGM("Ki ", tune_pid.Ki); + say_default_(); SERIAL_ECHOF(estring); SERIAL_ECHOLNPGM("Kd ", tune_pid.Kd); #else say_default_(); SERIAL_ECHOLNPGM("Kp ", tune_pid.Kp); say_default_(); SERIAL_ECHOLNPGM("Ki ", tune_pid.Ki); @@ -1737,21 +1737,21 @@ void Temperature::manage_heater() { SERIAL_ECHOPAIR_F_P(SP_B_STR, t.beta, 1); SERIAL_ECHOPAIR_F_P(SP_C_STR, t.sh_c_coeff, 9); SERIAL_ECHOPGM(" ; "); - SERIAL_ECHOPGM_P( - TERN_(TEMP_SENSOR_0_IS_CUSTOM, t_index == CTI_HOTEND_0 ? PSTR("HOTEND 0") :) - TERN_(TEMP_SENSOR_1_IS_CUSTOM, t_index == CTI_HOTEND_1 ? PSTR("HOTEND 1") :) - TERN_(TEMP_SENSOR_2_IS_CUSTOM, t_index == CTI_HOTEND_2 ? PSTR("HOTEND 2") :) - TERN_(TEMP_SENSOR_3_IS_CUSTOM, t_index == CTI_HOTEND_3 ? PSTR("HOTEND 3") :) - TERN_(TEMP_SENSOR_4_IS_CUSTOM, t_index == CTI_HOTEND_4 ? PSTR("HOTEND 4") :) - TERN_(TEMP_SENSOR_5_IS_CUSTOM, t_index == CTI_HOTEND_5 ? PSTR("HOTEND 5") :) - TERN_(TEMP_SENSOR_6_IS_CUSTOM, t_index == CTI_HOTEND_6 ? PSTR("HOTEND 6") :) - TERN_(TEMP_SENSOR_7_IS_CUSTOM, t_index == CTI_HOTEND_7 ? PSTR("HOTEND 7") :) - TERN_(TEMP_SENSOR_BED_IS_CUSTOM, t_index == CTI_BED ? PSTR("BED") :) - TERN_(TEMP_SENSOR_CHAMBER_IS_CUSTOM, t_index == CTI_CHAMBER ? PSTR("CHAMBER") :) - TERN_(TEMP_SENSOR_COOLER_IS_CUSTOM, t_index == CTI_COOLER ? PSTR("COOLER") :) - TERN_(TEMP_SENSOR_PROBE_IS_CUSTOM, t_index == CTI_PROBE ? PSTR("PROBE") :) - TERN_(TEMP_SENSOR_BOARD_IS_CUSTOM, t_index == CTI_BOARD ? PSTR("BOARD") :) - TERN_(TEMP_SENSOR_REDUNDANT_IS_CUSTOM, t_index == CTI_REDUNDANT ? PSTR("REDUNDANT") :) + SERIAL_ECHOF( + TERN_(TEMP_SENSOR_0_IS_CUSTOM, t_index == CTI_HOTEND_0 ? F("HOTEND 0") :) + TERN_(TEMP_SENSOR_1_IS_CUSTOM, t_index == CTI_HOTEND_1 ? F("HOTEND 1") :) + TERN_(TEMP_SENSOR_2_IS_CUSTOM, t_index == CTI_HOTEND_2 ? F("HOTEND 2") :) + TERN_(TEMP_SENSOR_3_IS_CUSTOM, t_index == CTI_HOTEND_3 ? F("HOTEND 3") :) + TERN_(TEMP_SENSOR_4_IS_CUSTOM, t_index == CTI_HOTEND_4 ? F("HOTEND 4") :) + TERN_(TEMP_SENSOR_5_IS_CUSTOM, t_index == CTI_HOTEND_5 ? F("HOTEND 5") :) + TERN_(TEMP_SENSOR_6_IS_CUSTOM, t_index == CTI_HOTEND_6 ? F("HOTEND 6") :) + TERN_(TEMP_SENSOR_7_IS_CUSTOM, t_index == CTI_HOTEND_7 ? F("HOTEND 7") :) + TERN_(TEMP_SENSOR_BED_IS_CUSTOM, t_index == CTI_BED ? F("BED") :) + TERN_(TEMP_SENSOR_CHAMBER_IS_CUSTOM, t_index == CTI_CHAMBER ? F("CHAMBER") :) + TERN_(TEMP_SENSOR_COOLER_IS_CUSTOM, t_index == CTI_COOLER ? F("COOLER") :) + TERN_(TEMP_SENSOR_PROBE_IS_CUSTOM, t_index == CTI_PROBE ? F("PROBE") :) + TERN_(TEMP_SENSOR_BOARD_IS_CUSTOM, t_index == CTI_BOARD ? F("BOARD") :) + TERN_(TEMP_SENSOR_REDUNDANT_IS_CUSTOM, t_index == CTI_REDUNDANT ? F("REDUNDANT") :) nullptr ); SERIAL_EOL(); diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp index 9f8aac634b..26a6d736eb 100644 --- a/Marlin/src/sd/cardreader.cpp +++ b/Marlin/src/sd/cardreader.cpp @@ -614,7 +614,7 @@ void announceOpen(const uint8_t doing, const char * const path) { PORT_REDIRECT(SerialMask::All); SERIAL_ECHO_START(); SERIAL_ECHOPGM("Now "); - SERIAL_ECHOPGM_P(doing == 1 ? PSTR("doing") : PSTR("fresh")); + SERIAL_ECHOF(doing == 1 ? F("doing") : F("fresh")); SERIAL_ECHOLNPGM(" file: ", path); } } @@ -1325,7 +1325,7 @@ void CardReader::fileHasFinished() { removeFile(recovery.filename); #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) SERIAL_ECHOPGM("Power-loss file delete"); - SERIAL_ECHOPGM_P(jobRecoverFileExists() ? PSTR(" failed.\n") : PSTR("d.\n")); + SERIAL_ECHOF(jobRecoverFileExists() ? F(" failed.\n") : F("d.\n")); #endif } } diff --git a/docs/Serial.md b/docs/Serial.md index ff8f84ef99..be3b23e87d 100644 --- a/docs/Serial.md +++ b/docs/Serial.md @@ -62,7 +62,7 @@ The following macros are defined (in `serial.h`) to output data to the serial po | `SERIAL_ECHOLNPGM` | Same as `SERIAL_ECHOPGM` | Do `SERIAL_ECHOPGM`, adding a newline | `SERIAL_ECHOPGM("Alice", 56);` | `alice56` | | `SERIAL_ECHOPGM_P` | Like `SERIAL_ECHOPGM` but takes PGM strings | Print a series of PGM strings and values alternately | `SERIAL_ECHOPGM_P(GET_TEXT(MSG_HELLO), 123);` | `Hello123` | | `SERIAL_ECHOLNPGM_P` | Same as `SERIAL_ECHOPGM_P` | Do `SERIAL_ECHOPGM_P`, adding a newline | `SERIAL_ECHOLNPGM_P(PSTR("Alice"), 78);` | `alice78\n` | -| `SERIAL_ECHOLIST` | String literal, values | Print a string literal and a list of values | `SERIAL_ECHOLIST("Key ", 1, 2, 3);` | `Key 1, 2, 3` | +| `SERIAL_ECHOLIST` | String literal, values | Print a string literal and a list of values | `SERIAL_ECHOLIST(F("Key "), 1, 2, 3);` | `Key 1, 2, 3` | | `SERIAL_ECHO_START` | None | Prefix an echo line | `SERIAL_ECHO_START();` | `echo:` | | `SERIAL_ECHO_MSG` | Same as `SERIAL_ECHOLN_PAIR` | Print a full echo line | `SERIAL_ECHO_MSG("Count is ", count);` | `echo:Count is 3` | | `SERIAL_ERROR_START`| None | Prefix an error line | `SERIAL_ERROR_START();` | `Error:` |