Unify AVR90USB: Pins cleanup
This commit is contained in:
Scott Lahteine
parent
87d8223251
commit
5426fc1735
|
|
@ -134,9 +134,9 @@
|
||||||
|
|
||||||
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||||
#undef SD_DETECT_PIN
|
#undef SD_DETECT_PIN
|
||||||
#define SD_DETECT_PIN 49 // For easy adapter board
|
#define SD_DETECT_PIN 49 // For easy adapter board
|
||||||
#undef BEEPER_PIN
|
#undef BEEPER_PIN
|
||||||
#define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
|
#define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
|
||||||
#else
|
#else
|
||||||
#define STAT_LED_RED_PIN 32
|
#define STAT_LED_RED_PIN 32
|
||||||
#define STAT_LED_BLUE_PIN 35
|
#define STAT_LED_BLUE_PIN 35
|
||||||
|
|
@ -146,9 +146,9 @@
|
||||||
// Misc. Functions
|
// Misc. Functions
|
||||||
//
|
//
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
|
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
|
||||||
#undef DOGLCD_A0 // steal pin 44 for the case light; if you have a Viki2 and have connected it
|
#undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it
|
||||||
#define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments
|
#define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments
|
||||||
// as the wiring diagram uses pin 44 for DOGLCD_A0
|
// as the wiring diagram uses pin 44 for DOGLCD_A0
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
//
|
//
|
||||||
|
|
|
||||||
|
|
@ -107,7 +107,7 @@
|
||||||
//
|
//
|
||||||
#define SDSS 17
|
#define SDSS 17
|
||||||
#define DEBUG_PIN 0
|
#define DEBUG_PIN 0
|
||||||
#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM
|
#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM
|
||||||
|
|
||||||
// RS485 pins
|
// RS485 pins
|
||||||
#define TX_ENABLE_PIN 12
|
#define TX_ENABLE_PIN 12
|
||||||
|
|
@ -116,6 +116,6 @@
|
||||||
//
|
//
|
||||||
// M3/M4/M5 - Spindle/Laser Control
|
// M3/M4/M5 - Spindle/Laser Control
|
||||||
//
|
//
|
||||||
#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
|
#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
|
||||||
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
|
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
|
||||||
#define SPINDLE_DIR_PIN 6
|
#define SPINDLE_DIR_PIN 6
|
||||||
|
|
|
||||||
|
|
@ -96,14 +96,14 @@
|
||||||
// Heaters
|
// Heaters
|
||||||
//
|
//
|
||||||
#define HEATER_0_PIN 4
|
#define HEATER_0_PIN 4
|
||||||
#define HEATER_BED_PIN 3 // (bed)
|
#define HEATER_BED_PIN 3 // (bed)
|
||||||
|
|
||||||
//
|
//
|
||||||
// Misc. Functions
|
// Misc. Functions
|
||||||
//
|
//
|
||||||
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
|
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
|
||||||
#define PS_ON_PIN 19
|
#define PS_ON_PIN 19
|
||||||
#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM
|
#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM
|
||||||
|
|
||||||
// A pin for debugging
|
// A pin for debugging
|
||||||
#define DEBUG_PIN -1
|
#define DEBUG_PIN -1
|
||||||
|
|
|
||||||
|
|
@ -131,7 +131,7 @@
|
||||||
#define SDSS 53
|
#define SDSS 53
|
||||||
#define LED_PIN 13
|
#define LED_PIN 13
|
||||||
#define PS_ON_PIN 12
|
#define PS_ON_PIN 12
|
||||||
#define CASE_LIGHT_PIN 45 // try the keypad connector
|
#define CASE_LIGHT_PIN 45 // Try the keypad connector
|
||||||
|
|
||||||
//
|
//
|
||||||
// LCD / Controller
|
// LCD / Controller
|
||||||
|
|
@ -144,9 +144,9 @@
|
||||||
|
|
||||||
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||||
|
|
||||||
#define LCD_PINS_RS 56 // CS chip select / SS chip slave select
|
#define LCD_PINS_RS 56 // CS chip select / SS chip slave select
|
||||||
#define LCD_PINS_ENABLE 51 // SID (MOSI)
|
#define LCD_PINS_ENABLE 51 // SID (MOSI)
|
||||||
#define LCD_PINS_D4 52 // SCK (CLK) clock
|
#define LCD_PINS_D4 52 // SCK (CLK) clock
|
||||||
#define SD_DETECT_PIN 35
|
#define SD_DETECT_PIN 35
|
||||||
|
|
||||||
#else
|
#else
|
||||||
|
|
|
||||||
|
|
@ -64,20 +64,20 @@
|
||||||
//
|
//
|
||||||
// Servos
|
// Servos
|
||||||
//
|
//
|
||||||
#define SERVO0_PIN 36 // C1 (1280-EX1)
|
#define SERVO0_PIN 36 // C1 (1280-EX1)
|
||||||
#define SERVO1_PIN 37 // C0 (1280-EX2)
|
#define SERVO1_PIN 37 // C0 (1280-EX2)
|
||||||
#define SERVO2_PIN 40 // G1 (1280-EX3)
|
#define SERVO2_PIN 40 // G1 (1280-EX3)
|
||||||
#define SERVO3_PIN 41 // G0 (1280-EX4)
|
#define SERVO3_PIN 41 // G0 (1280-EX4)
|
||||||
|
|
||||||
//
|
//
|
||||||
// Limit Switches
|
// Limit Switches
|
||||||
//
|
//
|
||||||
#define X_MIN_PIN 49 // L0
|
#define X_MIN_PIN 49 // L0
|
||||||
#define X_MAX_PIN 48 // L1
|
#define X_MAX_PIN 48 // L1
|
||||||
#define Y_MIN_PIN 47 // L2
|
#define Y_MIN_PIN 47 // L2
|
||||||
#define Y_MAX_PIN 46 // L3
|
#define Y_MAX_PIN 46 // L3
|
||||||
#define Z_MIN_PIN 43 // L6
|
#define Z_MIN_PIN 43 // L6
|
||||||
#define Z_MAX_PIN 42 // L7
|
#define Z_MAX_PIN 42 // L7
|
||||||
|
|
||||||
//
|
//
|
||||||
// Z Probe (when not Z_MIN_PIN)
|
// Z Probe (when not Z_MIN_PIN)
|
||||||
|
|
@ -89,25 +89,25 @@
|
||||||
//
|
//
|
||||||
// Steppers
|
// Steppers
|
||||||
//
|
//
|
||||||
#define X_STEP_PIN 55 // F1
|
#define X_STEP_PIN 55 // F1
|
||||||
#define X_DIR_PIN 54 // F0
|
#define X_DIR_PIN 54 // F0
|
||||||
#define X_ENABLE_PIN 56 // F2
|
#define X_ENABLE_PIN 56 // F2
|
||||||
|
|
||||||
#define Y_STEP_PIN 59 // F5
|
#define Y_STEP_PIN 59 // F5
|
||||||
#define Y_DIR_PIN 58 // F4
|
#define Y_DIR_PIN 58 // F4
|
||||||
#define Y_ENABLE_PIN 60 // F6
|
#define Y_ENABLE_PIN 60 // F6
|
||||||
|
|
||||||
#define Z_STEP_PIN 63 // K1
|
#define Z_STEP_PIN 63 // K1
|
||||||
#define Z_DIR_PIN 62 // K0
|
#define Z_DIR_PIN 62 // K0
|
||||||
#define Z_ENABLE_PIN 64 // K2
|
#define Z_ENABLE_PIN 64 // K2
|
||||||
|
|
||||||
#define E0_STEP_PIN 25 // A3
|
#define E0_STEP_PIN 25 // A3
|
||||||
#define E0_DIR_PIN 24 // A2
|
#define E0_DIR_PIN 24 // A2
|
||||||
#define E0_ENABLE_PIN 26 // A4
|
#define E0_ENABLE_PIN 26 // A4
|
||||||
|
|
||||||
#define E1_STEP_PIN 29 // A7
|
#define E1_STEP_PIN 29 // A7
|
||||||
#define E1_DIR_PIN 28 // A6
|
#define E1_DIR_PIN 28 // A6
|
||||||
#define E1_ENABLE_PIN 39 // G2
|
#define E1_ENABLE_PIN 39 // G2
|
||||||
|
|
||||||
//
|
//
|
||||||
// I2C Digipots - MCP4018
|
// I2C Digipots - MCP4018
|
||||||
|
|
@ -115,17 +115,17 @@
|
||||||
// Set from 0 - 127 with stop bit.
|
// Set from 0 - 127 with stop bit.
|
||||||
// (Ex. 3F << 1 | 1)
|
// (Ex. 3F << 1 | 1)
|
||||||
//
|
//
|
||||||
#define DIGIPOTS_I2C_SCL 76 // J5
|
#define DIGIPOTS_I2C_SCL 76 // J5
|
||||||
#define DIGIPOTS_I2C_SDA_X 57 // F3
|
#define DIGIPOTS_I2C_SDA_X 57 // F3
|
||||||
#define DIGIPOTS_I2C_SDA_Y 61 // F7
|
#define DIGIPOTS_I2C_SDA_Y 61 // F7
|
||||||
#define DIGIPOTS_I2C_SDA_Z 65 // K3
|
#define DIGIPOTS_I2C_SDA_Z 65 // K3
|
||||||
#define DIGIPOTS_I2C_SDA_E0 27 // A5
|
#define DIGIPOTS_I2C_SDA_E0 27 // A5
|
||||||
#define DIGIPOTS_I2C_SDA_E1 77 // J6
|
#define DIGIPOTS_I2C_SDA_E1 77 // J6
|
||||||
|
|
||||||
//
|
//
|
||||||
// Temperature Sensors
|
// Temperature Sensors
|
||||||
//
|
//
|
||||||
#define TEMP_BED_PIN 69 // K7
|
#define TEMP_BED_PIN 69 // K7
|
||||||
|
|
||||||
// SPI for Max6675 or Max31855 Thermocouple
|
// SPI for Max6675 or Max31855 Thermocouple
|
||||||
// Uses a separate SPI bus
|
// Uses a separate SPI bus
|
||||||
|
|
@ -135,10 +135,10 @@
|
||||||
// 2 E4 CS2
|
// 2 E4 CS2
|
||||||
// 78 E2 SCK
|
// 78 E2 SCK
|
||||||
//
|
//
|
||||||
#define THERMO_SCK_PIN 78 // E2
|
#define THERMO_SCK_PIN 78 // E2
|
||||||
#define THERMO_DO_PIN 3 // E5
|
#define THERMO_DO_PIN 3 // E5
|
||||||
#define THERMO_CS1 5 // E3
|
#define THERMO_CS1 5 // E3
|
||||||
#define THERMO_CS2 2 // E4
|
#define THERMO_CS2 2 // E4
|
||||||
|
|
||||||
#define MAX6675_SS THERMO_CS1
|
#define MAX6675_SS THERMO_CS1
|
||||||
#define MAX6675_SCK_PIN THERMO_SCK_PIN
|
#define MAX6675_SCK_PIN THERMO_SCK_PIN
|
||||||
|
|
@ -150,10 +150,10 @@
|
||||||
// 2 extruders or 1 extruder and a heated bed.
|
// 2 extruders or 1 extruder and a heated bed.
|
||||||
// With no heated bed, an additional 24V fan is possible.
|
// With no heated bed, an additional 24V fan is possible.
|
||||||
//
|
//
|
||||||
#define MOSFET_A_PIN 6 // H3
|
#define MOSFET_A_PIN 6 // H3
|
||||||
#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9
|
#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9
|
||||||
#define MOSFET_C_PIN 45 // L4
|
#define MOSFET_C_PIN 45 // L4
|
||||||
#define MOSFET_D_PIN 44 // L5
|
#define MOSFET_D_PIN 44 // L5
|
||||||
|
|
||||||
#if HOTENDS > 1
|
#if HOTENDS > 1
|
||||||
#if TEMP_SENSOR_BED
|
#if TEMP_SENSOR_BED
|
||||||
|
|
@ -195,43 +195,43 @@
|
||||||
//
|
//
|
||||||
// Extruder Auto Fan Pins
|
// Extruder Auto Fan Pins
|
||||||
//
|
//
|
||||||
#define ORIG_E0_AUTO_FAN_PIN 7 // H4
|
#define ORIG_E0_AUTO_FAN_PIN 7 // H4
|
||||||
#define ORIG_E1_AUTO_FAN_PIN 12 // B6
|
#define ORIG_E1_AUTO_FAN_PIN 12 // B6
|
||||||
|
|
||||||
//
|
//
|
||||||
// Misc. Functions
|
// Misc. Functions
|
||||||
//
|
//
|
||||||
#define LED_PIN 13 // B7
|
#define LED_PIN 13 // B7
|
||||||
#define CUTOFF_RESET_PIN 16 // H1
|
#define CUTOFF_RESET_PIN 16 // H1
|
||||||
#define CUTOFF_TEST_PIN 17 // H0
|
#define CUTOFF_TEST_PIN 17 // H0
|
||||||
#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
|
#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
|
||||||
|
|
||||||
//
|
//
|
||||||
// LCD / Controller
|
// LCD / Controller
|
||||||
//
|
//
|
||||||
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||||
|
|
||||||
#define LCD_PINS_RS 33 // C4, LCD-STROBE
|
#define LCD_PINS_RS 33 // C4: LCD-STROBE
|
||||||
#define LCD_PINS_ENABLE 72 // J2, LEFT
|
#define LCD_PINS_ENABLE 72 // J2: LEFT
|
||||||
#define LCD_PINS_D4 35 // C2, LCD-CLK
|
#define LCD_PINS_D4 35 // C2: LCD-CLK
|
||||||
#define LCD_PINS_D5 32 // C5, RLED
|
#define LCD_PINS_D5 32 // C5: RLED
|
||||||
#define LCD_PINS_D6 34 // C3, LCD-DATA
|
#define LCD_PINS_D6 34 // C3: LCD-DATA
|
||||||
#define LCD_PINS_D7 31 // C6, GLED
|
#define LCD_PINS_D7 31 // C6: GLED
|
||||||
|
|
||||||
#define BTN_EN2 75 // J4, UP
|
#define BTN_EN2 75 // J4, UP
|
||||||
#define BTN_EN1 73 // J3, DOWN
|
#define BTN_EN1 73 // J3, DOWN
|
||||||
//STOP button connected as KILL_PIN
|
//STOP button connected as KILL_PIN
|
||||||
#define KILL_PIN 14 // J1, RIGHT
|
#define KILL_PIN 14 // J1, RIGHT
|
||||||
//KILL - not connected
|
//KILL - not connected
|
||||||
|
|
||||||
#define BEEPER_PIN 8 // H5, SD_WP
|
#define BEEPER_PIN 8 // H5, SD_WP
|
||||||
|
|
||||||
#define BTN_CENTER 15 // J0
|
#define BTN_CENTER 15 // J0
|
||||||
#define BTN_ENC BTN_CENTER
|
#define BTN_ENC BTN_CENTER
|
||||||
|
|
||||||
//on board leds
|
//on board leds
|
||||||
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
|
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
|
||||||
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
|
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
|
||||||
|
|
||||||
#else
|
#else
|
||||||
// Replicator uses a 3-wire SR controller with HD44780
|
// Replicator uses a 3-wire SR controller with HD44780
|
||||||
|
|
@ -239,29 +239,29 @@
|
||||||
//
|
//
|
||||||
|
|
||||||
#define SAV_3DLCD
|
#define SAV_3DLCD
|
||||||
#define SR_DATA_PIN 34 // C3
|
#define SR_DATA_PIN 34 // C3
|
||||||
#define SR_CLK_PIN 35 // C2
|
#define SR_CLK_PIN 35 // C2
|
||||||
#define SR_STROBE_PIN 33 // C4
|
#define SR_STROBE_PIN 33 // C4
|
||||||
|
|
||||||
#define BTN_UP 75 // J4
|
#define BTN_UP 75 // J4
|
||||||
#define BTN_DOWN 73 // J3
|
#define BTN_DOWN 73 // J3
|
||||||
#define BTN_LEFT 72 // J2
|
#define BTN_LEFT 72 // J2
|
||||||
#define BTN_RIGHT 14 // J1
|
#define BTN_RIGHT 14 // J1
|
||||||
#define BTN_CENTER 15 // J0
|
#define BTN_CENTER 15 // J0
|
||||||
#define BTN_ENC BTN_CENTER
|
#define BTN_ENC BTN_CENTER
|
||||||
|
|
||||||
#define BEEPER_PIN 4 // G5
|
#define BEEPER_PIN 4 // G5
|
||||||
|
|
||||||
#define STAT_LED_RED_PIN 32 // C5
|
#define STAT_LED_RED_PIN 32 // C5
|
||||||
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
|
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
//
|
//
|
||||||
// SD Card
|
// SD Card
|
||||||
//
|
//
|
||||||
#define SDSS 53 // B0
|
#define SDSS 53 // B0
|
||||||
#define SD_DETECT_PIN 9 // H6
|
#define SD_DETECT_PIN 9 // H6
|
||||||
|
|
||||||
#define MAX_PIN THERMO_SCK_PIN
|
#define MAX_PIN THERMO_SCK_PIN
|
||||||
|
|
||||||
|
|
@ -275,9 +275,6 @@
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// Check if all pins are defined in mega/pins_arduino.h
|
// Check if all pins are defined in mega/pins_arduino.h
|
||||||
#include <Arduino.h>
|
#include <Arduino.h>
|
||||||
static_assert(NUM_DIGITAL_PINS > MAX_PIN, "add missing pins to [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h based on fastio.h"
|
static_assert(NUM_DIGITAL_PINS > MAX_PIN, "add missing pins to [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h based on fastio.h"
|
||||||
|
|
|
||||||
|
|
@ -104,9 +104,9 @@
|
||||||
|
|
||||||
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||||
|
|
||||||
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select
|
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select
|
||||||
#define LCD_PINS_ENABLE 11 // SID (MOSI)
|
#define LCD_PINS_ENABLE 11 // SID (MOSI)
|
||||||
#define LCD_PINS_D4 10 // SCK (CLK) clock
|
#define LCD_PINS_D4 10 // SCK (CLK) clock
|
||||||
|
|
||||||
#define BTN_EN1 18
|
#define BTN_EN1 18
|
||||||
#define BTN_EN2 17
|
#define BTN_EN2 17
|
||||||
|
|
|
||||||
|
|
@ -151,12 +151,12 @@
|
||||||
|
|
||||||
#if ENABLED(NEWPANEL)
|
#if ENABLED(NEWPANEL)
|
||||||
|
|
||||||
#define LCD_PINS_RS 70
|
#define LCD_PINS_RS 70
|
||||||
#define LCD_PINS_ENABLE 71
|
#define LCD_PINS_ENABLE 71
|
||||||
#define LCD_PINS_D4 72
|
#define LCD_PINS_D4 72
|
||||||
#define LCD_PINS_D5 73
|
#define LCD_PINS_D5 73
|
||||||
#define LCD_PINS_D6 74
|
#define LCD_PINS_D6 74
|
||||||
#define LCD_PINS_D7 75
|
#define LCD_PINS_D7 75
|
||||||
|
|
||||||
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||||
#define BEEPER_PIN 44
|
#define BEEPER_PIN 44
|
||||||
|
|
@ -202,12 +202,12 @@
|
||||||
//#define SHIFT_OUT 40
|
//#define SHIFT_OUT 40
|
||||||
//#define SHIFT_EN 17
|
//#define SHIFT_EN 17
|
||||||
|
|
||||||
#define LCD_PINS_RS 75
|
#define LCD_PINS_RS 75
|
||||||
#define LCD_PINS_ENABLE 17
|
#define LCD_PINS_ENABLE 17
|
||||||
#define LCD_PINS_D4 23
|
#define LCD_PINS_D4 23
|
||||||
#define LCD_PINS_D5 25
|
#define LCD_PINS_D5 25
|
||||||
#define LCD_PINS_D6 27
|
#define LCD_PINS_D6 27
|
||||||
#define LCD_PINS_D7 29
|
#define LCD_PINS_D7 29
|
||||||
|
|
||||||
#endif // !NEWPANEL
|
#endif // !NEWPANEL
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -220,25 +220,25 @@
|
||||||
#if ENABLED(ULTRA_LCD)
|
#if ENABLED(ULTRA_LCD)
|
||||||
|
|
||||||
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||||
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
|
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
|
||||||
#define LCD_PINS_ENABLE 51 // SID (MOSI)
|
#define LCD_PINS_ENABLE 51 // SID (MOSI)
|
||||||
#define LCD_PINS_D4 52 // SCK (CLK) clock
|
#define LCD_PINS_D4 52 // SCK (CLK) clock
|
||||||
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
|
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
|
||||||
#define LCD_PINS_RS 40
|
#define LCD_PINS_RS 40
|
||||||
#define LCD_PINS_ENABLE 42
|
#define LCD_PINS_ENABLE 42
|
||||||
#define LCD_PINS_D4 65
|
#define LCD_PINS_D4 65
|
||||||
#define LCD_PINS_D5 66
|
#define LCD_PINS_D5 66
|
||||||
#define LCD_PINS_D6 44
|
#define LCD_PINS_D6 44
|
||||||
#define LCD_PINS_D7 64
|
#define LCD_PINS_D7 64
|
||||||
#else
|
#else
|
||||||
#define LCD_PINS_RS 16
|
#define LCD_PINS_RS 16
|
||||||
#define LCD_PINS_ENABLE 17
|
#define LCD_PINS_ENABLE 17
|
||||||
#define LCD_PINS_D4 23
|
#define LCD_PINS_D4 23
|
||||||
#define LCD_PINS_D5 25
|
#define LCD_PINS_D5 25
|
||||||
#define LCD_PINS_D6 27
|
#define LCD_PINS_D6 27
|
||||||
#define LCD_PINS_D7 29
|
#define LCD_PINS_D7 29
|
||||||
#if DISABLED(NEWPANEL)
|
#if DISABLED(NEWPANEL)
|
||||||
#define BEEPER_PIN 33
|
#define BEEPER_PIN 33
|
||||||
// Buttons are attached to a shift register
|
// Buttons are attached to a shift register
|
||||||
// Not wired yet
|
// Not wired yet
|
||||||
//#define SHIFT_CLK 38
|
//#define SHIFT_CLK 38
|
||||||
|
|
@ -251,118 +251,125 @@
|
||||||
#if ENABLED(NEWPANEL)
|
#if ENABLED(NEWPANEL)
|
||||||
|
|
||||||
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||||
#define BEEPER_PIN 37
|
|
||||||
|
|
||||||
#define BTN_EN1 31
|
#define BEEPER_PIN 37
|
||||||
#define BTN_EN2 33
|
|
||||||
#define BTN_ENC 35
|
|
||||||
|
|
||||||
#define SD_DETECT_PIN 49
|
#define BTN_EN1 31
|
||||||
#define KILL_PIN 41
|
#define BTN_EN2 33
|
||||||
|
#define BTN_ENC 35
|
||||||
|
|
||||||
|
#define SD_DETECT_PIN 49
|
||||||
|
#define KILL_PIN 41
|
||||||
|
|
||||||
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
||||||
#define LCD_BACKLIGHT_PIN 39
|
#define LCD_BACKLIGHT_PIN 39
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||||
#define BTN_EN1 64
|
|
||||||
#define BTN_EN2 59
|
#define BTN_EN1 64
|
||||||
#define BTN_ENC 63
|
#define BTN_EN2 59
|
||||||
#define SD_DETECT_PIN 42
|
#define BTN_ENC 63
|
||||||
|
#define SD_DETECT_PIN 42
|
||||||
|
|
||||||
#elif ENABLED(LCD_I2C_PANELOLU2)
|
#elif ENABLED(LCD_I2C_PANELOLU2)
|
||||||
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
|
|
||||||
#define BTN_EN2 43
|
#define BTN_EN1 47
|
||||||
#define BTN_ENC 32
|
#define BTN_EN2 43
|
||||||
#define LCD_SDSS 53
|
#define BTN_ENC 32
|
||||||
#define SD_DETECT_PIN -1
|
#define LCD_SDSS 53
|
||||||
#define KILL_PIN 41
|
#define SD_DETECT_PIN -1
|
||||||
|
#define KILL_PIN 41
|
||||||
|
|
||||||
#elif ENABLED(LCD_I2C_VIKI)
|
#elif ENABLED(LCD_I2C_VIKI)
|
||||||
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
|
|
||||||
#define BTN_EN2 7 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf
|
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
|
||||||
// tells about 40/42.
|
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
|
||||||
// 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
|
|
||||||
#define BTN_ENC -1
|
#define BTN_ENC -1
|
||||||
#define LCD_SDSS 53
|
#define LCD_SDSS 53
|
||||||
#define SD_DETECT_PIN 49
|
#define SD_DETECT_PIN 49
|
||||||
|
|
||||||
#elif ENABLED(VIKI2) || ENABLED(miniVIKI)
|
#elif ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||||
#define BEEPER_PIN 33
|
|
||||||
|
#define BEEPER_PIN 33
|
||||||
|
|
||||||
// Pins for DOGM SPI LCD Support
|
// Pins for DOGM SPI LCD Support
|
||||||
#define DOGLCD_A0 44
|
#define DOGLCD_A0 44
|
||||||
#define DOGLCD_CS 45
|
#define DOGLCD_CS 45
|
||||||
#define LCD_SCREEN_ROT_180
|
#define LCD_SCREEN_ROT_180
|
||||||
|
|
||||||
#define BTN_EN1 22
|
#define BTN_EN1 22
|
||||||
#define BTN_EN2 7
|
#define BTN_EN2 7
|
||||||
#define BTN_ENC 39
|
#define BTN_ENC 39
|
||||||
|
|
||||||
#define SDSS 53
|
#define SDSS 53
|
||||||
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
|
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
|
||||||
|
|
||||||
#define KILL_PIN 31
|
#define KILL_PIN 31
|
||||||
|
|
||||||
#define STAT_LED_RED_PIN 32
|
#define STAT_LED_RED_PIN 32
|
||||||
#define STAT_LED_BLUE_PIN 35
|
#define STAT_LED_BLUE_PIN 35
|
||||||
|
|
||||||
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
||||||
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
|
#define BTN_EN1 35
|
||||||
#define BTN_EN2 37
|
#define BTN_EN2 37
|
||||||
#define BTN_ENC 31
|
#define BTN_ENC 31
|
||||||
#define SD_DETECT_PIN 49
|
#define SD_DETECT_PIN 49
|
||||||
#define LCD_SDSS 53
|
#define LCD_SDSS 53
|
||||||
#define KILL_PIN 41
|
#define KILL_PIN 41
|
||||||
#define BEEPER_PIN 23
|
#define BEEPER_PIN 23
|
||||||
#define DOGLCD_CS 29
|
#define DOGLCD_CS 29
|
||||||
#define DOGLCD_A0 27
|
#define DOGLCD_A0 27
|
||||||
#define LCD_BACKLIGHT_PIN 33
|
#define LCD_BACKLIGHT_PIN 33
|
||||||
#elif ENABLED(MINIPANEL)
|
#elif ENABLED(MINIPANEL)
|
||||||
#define BEEPER_PIN 42
|
#define BEEPER_PIN 42
|
||||||
// Pins for DOGM SPI LCD Support
|
// Pins for DOGM SPI LCD Support
|
||||||
#define DOGLCD_A0 44
|
#define DOGLCD_A0 44
|
||||||
#define DOGLCD_CS 66
|
#define DOGLCD_CS 66
|
||||||
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
|
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
|
||||||
#define SDSS 53
|
#define SDSS 53
|
||||||
|
|
||||||
#define KILL_PIN 64
|
#define KILL_PIN 64
|
||||||
// GLCD features
|
// GLCD features
|
||||||
//#define LCD_CONTRAST 190
|
//#define LCD_CONTRAST 190
|
||||||
// Uncomment screen orientation
|
// Uncomment screen orientation
|
||||||
//#define LCD_SCREEN_ROT_90
|
//#define LCD_SCREEN_ROT_90
|
||||||
//#define LCD_SCREEN_ROT_180
|
//#define LCD_SCREEN_ROT_180
|
||||||
//#define LCD_SCREEN_ROT_270
|
//#define LCD_SCREEN_ROT_270
|
||||||
// The encoder and click button
|
// The encoder and click button
|
||||||
#define BTN_EN1 40
|
#define BTN_EN1 40
|
||||||
#define BTN_EN2 63
|
#define BTN_EN2 63
|
||||||
#define BTN_ENC 59
|
#define BTN_ENC 59
|
||||||
// not connected to a pin
|
// not connected to a pin
|
||||||
#define SD_DETECT_PIN 49
|
#define SD_DETECT_PIN 49
|
||||||
|
|
||||||
#else
|
#else
|
||||||
|
|
||||||
// Beeper on AUX-4
|
// Beeper on AUX-4
|
||||||
#define BEEPER_PIN 33
|
#define BEEPER_PIN 33
|
||||||
|
|
||||||
// buttons are directly attached using AUX-2
|
// buttons are directly attached using AUX-2
|
||||||
#if ENABLED(REPRAPWORLD_KEYPAD)
|
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||||||
#define BTN_EN1 64 // encoder
|
#define BTN_EN1 64
|
||||||
#define BTN_EN2 59 // encoder
|
#define BTN_EN2 59
|
||||||
#define BTN_ENC 63 // enter button
|
#define BTN_ENC 63
|
||||||
#define SHIFT_OUT 40 // shift register
|
#define SHIFT_OUT 40
|
||||||
#define SHIFT_CLK 44 // shift register
|
#define SHIFT_CLK 44
|
||||||
#define SHIFT_LD 42 // shift register
|
#define SHIFT_LD 42
|
||||||
#elif ENABLED(PANEL_ONE)
|
#elif ENABLED(PANEL_ONE)
|
||||||
#define BTN_EN1 59 // AUX2 PIN 3
|
#define BTN_EN1 59 // AUX2 PIN 3
|
||||||
#define BTN_EN2 63 // AUX2 PIN 4
|
#define BTN_EN2 63 // AUX2 PIN 4
|
||||||
#define BTN_ENC 49 // AUX3 PIN 7
|
#define BTN_ENC 49 // AUX3 PIN 7
|
||||||
#else
|
#else
|
||||||
#define BTN_EN1 37
|
#define BTN_EN1 37
|
||||||
#define BTN_EN2 35
|
#define BTN_EN2 35
|
||||||
#define BTN_ENC 31 // the click
|
#define BTN_ENC 31
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if ENABLED(G3D_PANEL)
|
#if ENABLED(G3D_PANEL)
|
||||||
#define SD_DETECT_PIN 49
|
#define SD_DETECT_PIN 49
|
||||||
#define KILL_PIN 41
|
#define KILL_PIN 41
|
||||||
#else
|
#else
|
||||||
//#define SD_DETECT_PIN -1 // Ramps doesn't use this
|
//#define SD_DETECT_PIN -1 // Ramps doesn't use this
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -126,21 +126,21 @@
|
||||||
//
|
//
|
||||||
// LCD / Controller
|
// LCD / Controller
|
||||||
//
|
//
|
||||||
#define LCD_PINS_RS 70 // Ext2_5
|
#define LCD_PINS_RS 70 // Ext2_5
|
||||||
#define LCD_PINS_ENABLE 71 // Ext2_7
|
#define LCD_PINS_ENABLE 71 // Ext2_7
|
||||||
#define LCD_PINS_D4 72 // Ext2_9 ?
|
#define LCD_PINS_D4 72 // Ext2_9 ?
|
||||||
#define LCD_PINS_D5 73 // Ext2_11 ?
|
#define LCD_PINS_D5 73 // Ext2_11 ?
|
||||||
#define LCD_PINS_D6 74 // Ext2_13
|
#define LCD_PINS_D6 74 // Ext2_13
|
||||||
#define LCD_PINS_D7 75 // Ext2_15 ?
|
#define LCD_PINS_D7 75 // Ext2_15 ?
|
||||||
#define BEEPER_PIN -1
|
#define BEEPER_PIN -1
|
||||||
|
|
||||||
#define BTN_HOME 80 // Ext_16
|
#define BTN_HOME 80 // Ext_16
|
||||||
#define BTN_CENTER 81 // Ext_14
|
#define BTN_CENTER 81 // Ext_14
|
||||||
#define BTN_ENC BTN_CENTER
|
#define BTN_ENC BTN_CENTER
|
||||||
#define BTN_RIGHT 82 // Ext_12
|
#define BTN_RIGHT 82 // Ext_12
|
||||||
#define BTN_LEFT 83 // Ext_10
|
#define BTN_LEFT 83 // Ext_10
|
||||||
#define BTN_UP 84 // Ext2_8
|
#define BTN_UP 84 // Ext2_8
|
||||||
#define BTN_DOWN 85 // Ext2_6
|
#define BTN_DOWN 85 // Ext2_6
|
||||||
|
|
||||||
#define HOME_PIN BTN_HOME
|
#define HOME_PIN BTN_HOME
|
||||||
|
|
||||||
|
|
@ -151,7 +151,7 @@
|
||||||
#define DOGLCD_CS 71
|
#define DOGLCD_CS 71
|
||||||
#define LCD_SCREEN_ROT_180
|
#define LCD_SCREEN_ROT_180
|
||||||
|
|
||||||
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
|
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
|
||||||
|
|
||||||
#define STAT_LED_RED_PIN 22
|
#define STAT_LED_RED_PIN 22
|
||||||
#define STAT_LED_BLUE_PIN 32
|
#define STAT_LED_BLUE_PIN 32
|
||||||
|
|
|
||||||
|
|
@ -109,7 +109,7 @@
|
||||||
#define SDSS 53
|
#define SDSS 53
|
||||||
#define LED_PIN 13
|
#define LED_PIN 13
|
||||||
#define PS_ON_PIN 12
|
#define PS_ON_PIN 12
|
||||||
#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing.
|
#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing.
|
||||||
#define CASE_LIGHT_PIN 8
|
#define CASE_LIGHT_PIN 8
|
||||||
|
|
||||||
//
|
//
|
||||||
|
|
@ -121,12 +121,12 @@
|
||||||
|
|
||||||
#if ENABLED(NEWPANEL)
|
#if ENABLED(NEWPANEL)
|
||||||
|
|
||||||
#define LCD_PINS_RS 20
|
#define LCD_PINS_RS 20
|
||||||
#define LCD_PINS_ENABLE 17
|
#define LCD_PINS_ENABLE 17
|
||||||
#define LCD_PINS_D4 16
|
#define LCD_PINS_D4 16
|
||||||
#define LCD_PINS_D5 21
|
#define LCD_PINS_D5 21
|
||||||
#define LCD_PINS_D6 5
|
#define LCD_PINS_D6 5
|
||||||
#define LCD_PINS_D7 6
|
#define LCD_PINS_D7 6
|
||||||
|
|
||||||
// buttons are directly attached
|
// buttons are directly attached
|
||||||
#define BTN_EN1 40
|
#define BTN_EN1 40
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue