diff --git a/Marlin/src/HAL/AVR/HAL.h b/Marlin/src/HAL/AVR/HAL.h
index f6adf1bd31..890798a719 100644
--- a/Marlin/src/HAL/AVR/HAL.h
+++ b/Marlin/src/HAL/AVR/HAL.h
@@ -93,13 +93,13 @@ typedef int8_t pin_t;
   #define MYSERIAL1 TERN(BLUETOOTH, btSerial, MSerial0)
 #else
   #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
   #define MYSERIAL1 customizedSerial1
 
   #ifdef SERIAL_PORT_2
     #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+      #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
     #endif
     #define MYSERIAL2 customizedSerial2
   #endif
@@ -107,14 +107,14 @@ typedef int8_t pin_t;
 
 #ifdef MMU2_SERIAL_PORT
   #if !WITHIN(MMU2_SERIAL_PORT, -1, 3)
-    #error "MMU2_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
   #define MMU2_SERIAL mmuSerial
 #endif
 
 #ifdef LCD_SERIAL_PORT
   #if !WITHIN(LCD_SERIAL_PORT, -1, 3)
-    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
   #define LCD_SERIAL lcdSerial
   #if HAS_DGUS_LCD
diff --git a/Marlin/src/HAL/DUE/HAL.h b/Marlin/src/HAL/DUE/HAL.h
index 095538f6a6..501e2f0b06 100644
--- a/Marlin/src/HAL/DUE/HAL.h
+++ b/Marlin/src/HAL/DUE/HAL.h
@@ -56,7 +56,7 @@ extern DefaultSerial4 MSerial3;
 #elif WITHIN(SERIAL_PORT, 0, 3)
   #define MYSERIAL1 MSERIAL(SERIAL_PORT)
 #else
-  #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #error "The required SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
 #endif
 
 #ifdef SERIAL_PORT_2
@@ -65,7 +65,7 @@ extern DefaultSerial4 MSerial3;
   #elif WITHIN(SERIAL_PORT_2, 0, 3)
     #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
   #else
-    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
 #endif
 
@@ -73,7 +73,7 @@ extern DefaultSerial4 MSerial3;
   #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
     #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
   #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3. Please update your configuration."
+    #error "MMU2_SERIAL_PORT must be from 0 to 3."
   #endif
 #endif
 
@@ -83,7 +83,7 @@ extern DefaultSerial4 MSerial3;
   #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
     #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
   #else
-    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
 #endif
 
diff --git a/Marlin/src/HAL/LPC1768/HAL.h b/Marlin/src/HAL/LPC1768/HAL.h
index 828e126d70..07385261da 100644
--- a/Marlin/src/HAL/LPC1768/HAL.h
+++ b/Marlin/src/HAL/LPC1768/HAL.h
@@ -71,7 +71,7 @@ extern DefaultSerial1 USBSerial;
 #elif WITHIN(SERIAL_PORT, 0, 3)
   #define MYSERIAL1 MSERIAL(SERIAL_PORT)
 #else
-  #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #error "SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
 #endif
 
 #ifdef SERIAL_PORT_2
@@ -80,7 +80,7 @@ extern DefaultSerial1 USBSerial;
   #elif WITHIN(SERIAL_PORT_2, 0, 3)
     #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
   #else
-    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
 #endif
 
@@ -90,7 +90,7 @@ extern DefaultSerial1 USBSerial;
   #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
     #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
   #else
-    #error "MMU2_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
 #endif
 
@@ -100,7 +100,7 @@ extern DefaultSerial1 USBSerial;
   #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
     #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
   #else
-    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
   #if HAS_DGUS_LCD
     #define SERIAL_GET_TX_BUFFER_FREE() MSerial0.available()
diff --git a/Marlin/src/HAL/SAMD51/HAL.h b/Marlin/src/HAL/SAMD51/HAL.h
index de72c476e4..3add6c9b69 100644
--- a/Marlin/src/HAL/SAMD51/HAL.h
+++ b/Marlin/src/HAL/SAMD51/HAL.h
@@ -54,7 +54,7 @@
   #elif WITHIN(SERIAL_PORT, 0, 3)
     #define MYSERIAL1 MSERIAL(SERIAL_PORT)
   #else
-    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
 
   #ifdef SERIAL_PORT_2
@@ -63,7 +63,7 @@
     #elif WITHIN(SERIAL_PORT_2, 0, 3)
       #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
     #else
-      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+      #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
     #endif
   #endif
 
@@ -73,7 +73,7 @@
     #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
       #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
     #else
-      #error "MMU2_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+      #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
     #endif
   #endif
 
@@ -83,7 +83,7 @@
     #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
       #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
     #else
-      #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+      #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
     #endif
   #endif
 
diff --git a/Marlin/src/HAL/STM32/HAL.h b/Marlin/src/HAL/STM32/HAL.h
index ad3a9963d7..d8e45670e6 100644
--- a/Marlin/src/HAL/STM32/HAL.h
+++ b/Marlin/src/HAL/STM32/HAL.h
@@ -55,7 +55,7 @@
 #elif WITHIN(SERIAL_PORT, 1, 6)
   #define MYSERIAL1 MSERIAL(SERIAL_PORT)
 #else
-  #error "SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration."
+  #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
 #endif
 
 #ifdef SERIAL_PORT_2
@@ -64,7 +64,7 @@
   #elif WITHIN(SERIAL_PORT_2, 1, 6)
     #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
   #else
-    #error "SERIAL_PORT_2 must be -1 or from 1 to 6. Please update your configuration."
+    #error "SERIAL_PORT_2 must be from 1 to 6. You can also use -1 if the board supports Native USB."
   #endif
 #endif
 
@@ -74,7 +74,7 @@
   #elif WITHIN(MMU2_SERIAL_PORT, 1, 6)
     #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
   #else
-    #error "MMU2_SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration."
+    #error "MMU2_SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   #endif
 #endif
 
@@ -84,7 +84,7 @@
   #elif WITHIN(LCD_SERIAL_PORT, 1, 6)
     #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
   #else
-    #error "LCD_SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   #endif
   #if HAS_DGUS_LCD
     #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
diff --git a/Marlin/src/HAL/STM32F1/HAL.h b/Marlin/src/HAL/STM32F1/HAL.h
index 94b0ad7ead..f37b0f2728 100644
--- a/Marlin/src/HAL/STM32F1/HAL.h
+++ b/Marlin/src/HAL/STM32F1/HAL.h
@@ -87,9 +87,9 @@
 #else
   #define MYSERIAL1 MSERIAL(1) // dummy port
   #if NUM_UARTS == 5
-    #error "SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
+    #error "SERIAL_PORT must be from 1 to 5. You can also use -1 if the board supports Native USB."
   #else
-    #error "SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
+    #error "SERIAL_PORT must be from 1 to 3. You can also use -1 if the board supports Native USB."
   #endif
 #endif
 
@@ -101,9 +101,9 @@
   #else
     #define MYSERIAL2 MSERIAL(1) // dummy port
     #if NUM_UARTS == 5
-      #error "SERIAL_PORT_2 must be -1 or from 1 to 5. Please update your configuration."
+      #error "SERIAL_PORT_2 must be from 1 to 5. You can also use -1 if the board supports Native USB."
     #else
-      #error "SERIAL_PORT_2 must be -1 or from 1 to 3. Please update your configuration."
+      #error "SERIAL_PORT_2 must be from 1 to 3. You can also use -1 if the board supports Native USB."
     #endif
   #endif
 #endif
@@ -116,9 +116,9 @@
   #else
     #define MMU2_SERIAL MSERIAL(1) // dummy port
     #if NUM_UARTS == 5
-      #error "MMU2_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
+      #error "MMU2_SERIAL_PORT must be from 1 to 5. You can also use -1 if the board supports Native USB."
     #else
-      #error "MMU2_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
+      #error "MMU2_SERIAL_PORT must be from 1 to 3. You can also use -1 if the board supports Native USB."
     #endif
   #endif
 #endif
@@ -131,9 +131,9 @@
   #else
     #define LCD_SERIAL MSERIAL(1) // dummy port
     #if NUM_UARTS == 5
-      #error "LCD_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
+      #error "LCD_SERIAL_PORT must be from 1 to 5. You can also use -1 if the board supports Native USB."
     #else
-      #error "LCD_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
+      #error "LCD_SERIAL_PORT must be from 1 to 3. You can also use -1 if the board supports Native USB."
     #endif
   #endif
   #if HAS_DGUS_LCD
diff --git a/Marlin/src/HAL/TEENSY31_32/HAL.cpp b/Marlin/src/HAL/TEENSY31_32/HAL.cpp
index 7b7202547a..67f716c5d3 100644
--- a/Marlin/src/HAL/TEENSY31_32/HAL.cpp
+++ b/Marlin/src/HAL/TEENSY31_32/HAL.cpp
@@ -35,6 +35,8 @@
 #define IMPLEMENT_SERIAL(X)  _IMPLEMENT_SERIAL(X)
 #if WITHIN(SERIAL_PORT, 0, 3)
   IMPLEMENT_SERIAL(SERIAL_PORT);
+#else
+  #error "SERIAL_PORT must be from 0 to 3."
 #endif
 USBSerialType USBSerial(false, SerialUSB);
 
diff --git a/Marlin/src/HAL/TEENSY35_36/HAL.h b/Marlin/src/HAL/TEENSY35_36/HAL.h
index 5b120d852d..50008d72f6 100644
--- a/Marlin/src/HAL/TEENSY35_36/HAL.h
+++ b/Marlin/src/HAL/TEENSY35_36/HAL.h
@@ -72,6 +72,8 @@ extern USBSerialType USBSerial;
 #elif WITHIN(SERIAL_PORT, 0, 3)
   #define MYSERIAL1 MSERIAL(SERIAL_PORT)
   DECLARE_SERIAL(SERIAL_PORT);
+#else
+  #error "SERIAL_PORT must be from 0 to 3, or -1 for Native USB."
 #endif
 
 #define HAL_SERVO_LIB libServo
diff --git a/Marlin/src/HAL/TEENSY40_41/HAL.h b/Marlin/src/HAL/TEENSY40_41/HAL.h
index ce985dadb9..701d690382 100644
--- a/Marlin/src/HAL/TEENSY40_41/HAL.h
+++ b/Marlin/src/HAL/TEENSY40_41/HAL.h
@@ -74,7 +74,7 @@ extern USBSerialType USBSerial;
   DECLARE_SERIAL(SERIAL_PORT);
   #define MYSERIAL1 MSERIAL(SERIAL_PORT)
 #else
-  #error "The required SERIAL_PORT must be from -1 to 8. Please update your configuration."
+  #error "The required SERIAL_PORT must be from 0 to 8, or -1 for Native USB."
 #endif
 
 #ifdef SERIAL_PORT_2
@@ -85,7 +85,7 @@ extern USBSerialType USBSerial;
   #elif WITHIN(SERIAL_PORT_2, 0, 8)
     #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
   #else
-    #error "SERIAL_PORT_2 must be from -2 to 8. Please update your configuration."
+    #error "SERIAL_PORT_2 must be from 0 to 8, or -1 for Native USB, or -2 for Ethernet."
   #endif
 #endif