🎨 Misc. cleanup 29-01

Marlin/Marlin.ino

@@ -2,7 +2,7 @@
 
   Marlin Firmware
 
-  (c) 2011-2023 MarlinFirmware
+  (c) 2011-2024 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 

Marlin/src/HAL/AVR/HAL_SPI.cpp

@@ -119,7 +119,6 @@ void spiBegin() {
     while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
   }
 
-
   /** begin spi transaction */
   void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
     // Based on Arduino SPI library
@@ -175,7 +174,6 @@ void spiBegin() {
     SPSR = clockDiv | 0x01;
   }
 
-
 #else // SOFTWARE_SPI || FORCE_SOFT_SPI
 
   // ------------------------

Marlin/src/HAL/AVR/Servo.cpp

@@ -63,7 +63,6 @@
 
 static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)
 
-
 /************ static functions common to all instances ***********************/
 
 static inline void handle_interrupts(const timer16_Sequence_t timer, volatile uint16_t* TCNTn, volatile uint16_t* OCRnA) {

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -91,7 +91,6 @@ void endstop_ISR() { endstops.update(); }
 
 #endif
 
-
 // Install Pin change interrupt for a pin. Can be called multiple times.
 void pciSetup(const int8_t pin) {
   if (digitalPinHasPCICR(pin)) {

Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h

@@ -679,7 +679,6 @@
 #define PF7_PWM     0
 #define PF7_DDR     DDRF
 
-
 /**
  * Some of the pin mapping functions of the Teensduino extension to the Arduino IDE
  * do not function the same as the other Arduino extensions.

Marlin/src/HAL/AVR/pinsDebug.h

@@ -163,7 +163,6 @@ bool pwm_status(uint8_t pin) {
   SERIAL_ECHO_SP(2);
 } // pwm_status
 
-
 const volatile uint8_t* const PWM_other[][3] PROGMEM = {
     { &TCCR0A, &TCCR0B, &TIMSK0 },
     { &TCCR1A, &TCCR1B, &TIMSK1 },
@@ -181,7 +180,6 @@ const volatile uint8_t* const PWM_other[][3] PROGMEM = {
   #endif
 };
 
-
 const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
 
   #ifdef TIMER0A
@@ -217,7 +215,6 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
   #endif
 };
 
-
 #define TCCR_A(T)   pgm_read_word(&PWM_other[T][0])
 #define TCCR_B(T)   pgm_read_word(&PWM_other[T][1])
 #define TIMSK(T)    pgm_read_word(&PWM_other[T][2])

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -120,7 +120,6 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
   U8G_ATOMIC_END();
 }
 
-
 #if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else

Marlin/src/HAL/DUE/MarlinSerial.cpp

@@ -474,7 +474,6 @@ void MarlinSerial<Cfg>::flushTX() {
   }
 }
 
-
 // If not using the USB port as serial port
 #if defined(SERIAL_PORT) && SERIAL_PORT >= 0
   template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;

Marlin/src/HAL/DUE/fastio/G2_PWM.h

@@ -49,7 +49,6 @@ extern volatile uint32_t *SODR_A, *SODR_B, *CODR_A, *CODR_B;
 
 #define PWM_MAP_INIT_ROW(IO,ZZ) { ZZ == 'A' ? SODR_A : SODR_B,  ZZ == 'A' ? CODR_A : CODR_B, 1 << _PIN(IO) }
 
-
 #define PWM_MAP_INIT {  PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_X_PIN, 'B'), \
                         PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Y_PIN, 'B'), \
                         PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Z_PIN, 'B'), \

Marlin/src/HAL/DUE/fastio/G2_pins.h

@@ -168,7 +168,6 @@ const G2_PinDescription G2_g_APinDescription[] = {
   { PIOB, PIO_PB21,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 52
   { PIOB, PIO_PB14,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 53
 
-
   // 54 .. 65 - Analog pins
   // ----------------------
   { PIOA, PIO_PA16X1_AD7,    ID_PIOA, PIO_INPUT,    PIO_DEFAULT, PIN_ATTR_ANALOG,                   ADC0,   ADC7,   NOT_ON_PWM,  NOT_ON_TIMER }, // AD0

Marlin/src/HAL/DUE/usb/compiler.h

@@ -142,7 +142,6 @@
  */
 #define COMPILER_PACK_RESET()          COMPILER_PRAGMA(pack())
 
-
 /**
  * \brief Set aligned boundary.
  */
@@ -283,7 +282,6 @@ typedef double                  F64;  //!< 64-bit floating-point number.
 typedef uint32_t                iram_size_t;
 //! @}
 
-
 /*! \name Status Types
  */
 //! @{
@@ -291,7 +289,6 @@ typedef bool                Status_bool_t;  //!< Boolean status.
 typedef U8                  Status_t;       //!< 8-bit-coded status.
 //! @}
 
-
 /*! \name Aliasing Aggregate Types
  */
 //! @{
@@ -462,7 +459,6 @@ typedef struct
 #endif
 //! @}
 
-
 #ifndef __ASSEMBLY__ // not for assembling.
 
 //! \name Optimization Control
@@ -581,7 +577,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Zero-Bit Counting
  *
  * Under GCC, __builtin_clz and __builtin_ctz behave like macros when
@@ -692,7 +687,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Bit Reversing
  */
 //! @{
@@ -732,7 +726,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Alignment
  */
 //! @{
@@ -798,7 +791,6 @@ typedef struct
  */
 #define Long_call(addr)                   ((*(void (*)(void))(addr))())
 
-
 /*! \name MCU Endianism Handling
  * ARM is MCU little endianism.
  */
@@ -868,7 +860,6 @@ typedef struct
 #define  CPU_TO_BE32(x) swap32(x)
 //! @}
 
-
 /*! \name Endianism Conversion
  *
  * The same considerations as for clz and ctz apply here but GCC's
@@ -955,7 +946,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Target Abstraction
  */
 //! @{
@@ -997,7 +987,6 @@ typedef U8                  Byte;       //!< 8-bit unsigned integer.
 
 #endif  // #ifndef __ASSEMBLY__
 
-
 #ifdef __ICCARM__
 #define SHORTENUM           __packed
 #elif defined(__GNUC__)

Marlin/src/HAL/DUE/usb/conf_access.h

@@ -81,7 +81,6 @@
 #define LUN_0_NAME                              "\"SD/MMC Card\""
 //! @}
 
-
 /*! \name Actions Associated with Memory Accesses
  *
  * Write here the action to associate with each memory access.
@@ -112,5 +111,4 @@
 #define GLOBAL_WR_PROTECT    false   //!< Management of a global write protection.
 //! @}
 
-
 #endif // _CONF_ACCESS_H_

Marlin/src/HAL/DUE/usb/conf_clock.h

@@ -96,5 +96,4 @@
 // - UPLL frequency: 480MHz
 // - USB clock: 480 / 1 = 480MHz
 
-
 #endif /* CONF_CLOCK_H_INCLUDED */

Marlin/src/HAL/DUE/usb/conf_usb.h

@@ -88,7 +88,6 @@
 #endif
 //@}
 
-
 /**
  * USB Device Callbacks definitions (Optional)
  * @{
@@ -150,7 +149,6 @@
 
 //@}
 
-
 /**
  * USB Interface Configuration
  * @{
@@ -210,7 +208,6 @@
   //@}
   //@}
 
-
   /**
    * Configuration of MSC interface
    * @{
@@ -245,7 +242,6 @@
 
   //@}
 
-
   /**
    * Description of Composite Device
    * @{

Marlin/src/HAL/DUE/usb/ctrl_access.c

@@ -68,7 +68,6 @@
 #endif
 #include "ctrl_access.h"
 
-
 //_____ D E F I N I T I O N S ______________________________________________
 
 #ifdef FREERTOS_USED
@@ -112,7 +111,6 @@ static xSemaphoreHandle ctrl_access_semphr = NULL;
 
 #endif  // FREERTOS_USED
 
-
 #if MAX_LUN
 
 /*! \brief Initializes an entry of the LUN descriptor table.
@@ -242,17 +240,14 @@ static const struct
 
 #endif
 
-
 #if GLOBAL_WR_PROTECT == true
 bool g_wr_protect;
 #endif
 
-
 /*! \name Control Interface
  */
 //! @{
 
-
 #ifdef FREERTOS_USED
 
 bool ctrl_access_init(void)
@@ -270,7 +265,6 @@ bool ctrl_access_init(void)
   return true;
 }
 
-
 /*! \brief Locks accesses to LUNs.
  *
  * \return \c true if the access was successfully locked, else \c false.
@@ -288,7 +282,6 @@ static bool ctrl_access_lock(void)
 
 #endif  // FREERTOS_USED
 
-
 U8 get_nb_lun(void)
 {
 #if MEM_USB == ENABLE
@@ -309,13 +302,11 @@ U8 get_nb_lun(void)
 #endif
 }
 
-
 U8 get_cur_lun(void)
 {
   return LUN_ID_0;
 }
 
-
 Ctrl_status mem_test_unit_ready(U8 lun)
 {
   Ctrl_status status;
@@ -337,7 +328,6 @@ Ctrl_status mem_test_unit_ready(U8 lun)
   return status;
 }
 
-
 Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
 {
   Ctrl_status status;
@@ -359,7 +349,6 @@ Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
   return status;
 }
 
-
 U8 mem_sector_size(U8 lun)
 {
   U8 sector_size;
@@ -381,7 +370,6 @@ U8 mem_sector_size(U8 lun)
   return sector_size;
 }
 
-
 bool mem_unload(U8 lun, bool unload)
 {
   bool unloaded;
@@ -433,7 +421,6 @@ bool mem_wr_protect(U8 lun)
   return wr_protect;
 }
 
-
 bool mem_removal(U8 lun)
 {
   bool removal;
@@ -458,7 +445,6 @@ bool mem_removal(U8 lun)
   return removal;
 }
 
-
 const char *mem_name(U8 lun)
 {
 #if MAX_LUN==0
@@ -475,17 +461,14 @@ const char *mem_name(U8 lun)
 #endif
 }
 
-
 //! @}
 
-
 #if ACCESS_USB == true
 
 /*! \name MEM <-> USB Interface
  */
 //! @{
 
-
 Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
 {
   Ctrl_status status;
@@ -505,7 +488,6 @@ Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
   return status;
 }
 
-
 Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
 {
   Ctrl_status status;
@@ -525,19 +507,16 @@ Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
   return status;
 }
 
-
 //! @}
 
 #endif  // ACCESS_USB == true
 
-
 #if ACCESS_MEM_TO_RAM == true
 
 /*! \name MEM <-> RAM Interface
  */
 //! @{
 
-
 Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
 {
   Ctrl_status status;
@@ -564,7 +543,6 @@ Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
   return status;
 }
 
-
 Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
 {
   Ctrl_status status;
@@ -591,19 +569,16 @@ Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
   return status;
 }
 
-
 //! @}
 
 #endif  // ACCESS_MEM_TO_RAM == true
 
-
 #if ACCESS_STREAM == true
 
 /*! \name Streaming MEM <-> MEM Interface
  */
 //! @{
 
-
   #if ACCESS_MEM_TO_MEM == true
 
 #include "fat.h"
@@ -625,21 +600,18 @@ Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_ad
 
   #endif  // ACCESS_MEM_TO_MEM == true
 
-
 Ctrl_status stream_state(U8 id)
 {
   UNUSED(id);
   return CTRL_GOOD;
 }
 
-
 U16 stream_stop(U8 id)
 {
   UNUSED(id);
   return 0;
 }
 
-
 //! @}
 
 #endif // ACCESS_STREAM

Marlin/src/HAL/DUE/usb/ctrl_access.h

@@ -56,7 +56,6 @@
  * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
-
 #ifndef _CTRL_ACCESS_H_
 #define _CTRL_ACCESS_H_
 
@@ -89,7 +88,6 @@ typedef enum
   CTRL_BUSY       = FAIL + 2  //!< Memory not initialized or changed.
 } Ctrl_status;
 
-
 // FYI: Each Logical Unit Number (LUN) corresponds to a memory.
 
 // Check LUN defines.
@@ -136,7 +134,6 @@ typedef enum
 #define LUN_ID_USB      (MAX_LUN)           //!< First dynamic LUN (USB host mass storage).
 //! @}
 
-
 // Include LUN header files.
 #if LUN_0 == ENABLE
   #include LUN_0_INCLUDE
@@ -166,13 +163,11 @@ typedef enum
   #include LUN_USB_INCLUDE
 #endif
 
-
 // Check the configuration of write protection in conf_access.h.
 #ifndef GLOBAL_WR_PROTECT
   #error GLOBAL_WR_PROTECT must be defined as true or false in conf_access.h
 #endif
 
-
 #if GLOBAL_WR_PROTECT == true
 
 //! Write protect.
@@ -180,7 +175,6 @@ extern bool g_wr_protect;
 
 #endif
 
-
 /*! \name Control Interface
  */
 //! @{
@@ -279,7 +273,6 @@ extern const char *mem_name(U8 lun);
 
 //! @}
 
-
 #if ACCESS_USB == true
 
 /*! \name MEM <-> USB Interface
@@ -310,7 +303,6 @@ extern Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector);
 
 #endif  // ACCESS_USB == true
 
-
 #if ACCESS_MEM_TO_RAM == true
 
 /*! \name MEM <-> RAM Interface
@@ -341,7 +333,6 @@ extern Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram);
 
 #endif  // ACCESS_MEM_TO_RAM == true
 
-
 #if ACCESS_STREAM == true
 
 /*! \name Streaming MEM <-> MEM Interface

Marlin/src/HAL/DUE/usb/mrepeat.h

@@ -57,7 +57,6 @@
 
 #include "preprocessor.h"
 
-
 //! Maximal number of repetitions supported by MREPEAT.
 #define MREPEAT_LIMIT   256
 

Marlin/src/HAL/DUE/usb/osc.h

@@ -128,7 +128,6 @@ static inline void osc_enable(uint32_t ul_id) {
     pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS);
     break;
 
-
   case OSC_MAINCK_4M_RC:
     pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz);
     break;
@@ -141,7 +140,6 @@ static inline void osc_enable(uint32_t ul_id) {
     pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz);
     break;
 
-
   case OSC_MAINCK_XTAL:
     pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*,
       pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,

Marlin/src/HAL/DUE/usb/preprocessor.h

@@ -51,5 +51,4 @@
 #include "stringz.h"
 #include "mrepeat.h"
 
-
 #endif  // _PREPROCESSOR_H_

Marlin/src/HAL/DUE/usb/sbc_protocol.h

@@ -86,7 +86,6 @@ enum scsi_sbc_mode {
   SCSI_MS_MODE_CACHING = 0x08,    //!< Caching mode page
 };
 
-
 //! \name SBC-2 Device-Specific Parameter
 //@{
 #define SCSI_MS_SBC_WP              0x80    //!< Write Protected

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h

@@ -45,7 +45,6 @@
  * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
-
 #ifndef _SD_MMC_SPI_MEM_H_
 #define _SD_MMC_SPI_MEM_H_
 
@@ -63,17 +62,14 @@
   #error sd_mmc_spi_mem.h is #included although SD_MMC_SPI_MEM is disabled
 #endif
 
-
 #include "ctrl_access.h"
 
-
 //_____ D E F I N I T I O N S ______________________________________________
 
 #define   SD_MMC_REMOVED       0
 #define   SD_MMC_INSERTED      1
 #define   SD_MMC_REMOVING      2
 
-
 //---- CONTROL FUNCTIONS ----
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
@@ -133,7 +129,6 @@ extern bool           sd_mmc_spi_wr_protect(void);
 //!
 extern bool           sd_mmc_spi_removal(void);
 
-
 //---- ACCESS DATA FUNCTIONS ----
 
 #if ACCESS_USB == true

Marlin/src/HAL/DUE/usb/sysclk.h

@@ -212,7 +212,6 @@ extern "C" {
   #define CONFIG_USBCLK_DIV
 #endif
 
-
 extern void sysclk_enable_usb(void);
 extern void sysclk_disable_usb(void);
 

Marlin/src/HAL/DUE/usb/udc.c

@@ -83,7 +83,6 @@ static usb_iface_desc_t UDC_DESC_STORAGE *udc_ptr_iface;
 
 //! @}
 
-
 //! \name Internal structure to store the USB device main strings
 //! @{
 

Marlin/src/HAL/DUE/usb/udc.h

@@ -685,6 +685,4 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
    } \endcode
  */
 
-
-
 #endif // _UDC_H_

Marlin/src/HAL/DUE/usb/udd.h

@@ -213,7 +213,6 @@ void udd_send_remotewakeup(void);
  */
 void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );
 
-
 /**
  * \name Endpoint Management
  *

Marlin/src/HAL/DUE/usb/udi_cdc.c

@@ -457,7 +457,6 @@ void udi_cdc_data_sof_notify(void)
 #endif
 }
 
-
 // ------------------------
 //------- Internal routines to control serial line
 
@@ -520,7 +519,6 @@ static void udi_cdc_ctrl_state_change(uint8_t port, bool b_set, le16_t bit_mask)
 	udi_cdc_ctrl_state_notify(port, ep_comm);
 }
 
-
 static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 {
 #if UDI_CDC_PORT_NB == 1 // To optimize code
@@ -542,7 +540,6 @@ static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 	}
 }
 
-
 static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -578,11 +575,9 @@ static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n,
 	udi_cdc_ctrl_state_notify(port, ep);
 }
 
-
 // ------------------------
 //------- Internal routines to process data transfer
 
-
 static bool udi_cdc_rx_start(uint8_t port)
 {
 	irqflags_t flags;
@@ -632,7 +627,6 @@ static bool udi_cdc_rx_start(uint8_t port)
 			udi_cdc_data_received);
 }
 
-
 static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t buf_sel_trans;
@@ -668,7 +662,6 @@ static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_
 	udi_cdc_rx_start(port);
 }
 
-
 static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -700,7 +693,6 @@ static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t
 	udi_cdc_tx_send(port);
 }
 
-
 static void udi_cdc_tx_send(uint8_t port)
 {
 	irqflags_t flags;
@@ -780,11 +772,9 @@ static void udi_cdc_tx_send(uint8_t port)
 			udi_cdc_data_sent);
 }
 
-
 // ------------------------
 //------- Application interface
 
-
 //------- Application interface
 
 void udi_cdc_ctrl_signal_dcd(bool b_set)

Marlin/src/HAL/DUE/usb/udi_cdc.h

@@ -106,7 +106,6 @@ typedef struct {
   usb_ep_desc_t ep_notify;
 } udi_cdc_comm_desc_t;
 
-
 /**
  * \brief Data Class interface descriptor
  *
@@ -121,7 +120,6 @@ typedef struct {
   usb_ep_desc_t ep_out;
 } udi_cdc_data_desc_t;
 
-
 //! CDC communication endpoints size for all speeds
 #define UDI_CDC_COMM_EP_SIZE        64
 //! CDC data endpoints size for FS speed (8B, 16B, 32B, 64B)

Marlin/src/HAL/DUE/usb/udi_cdc_desc.c

@@ -109,7 +109,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
   .bNumConfigurations = 1
 };
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED

Marlin/src/HAL/DUE/usb/udi_composite_desc.c

@@ -93,7 +93,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
   .bNumConfigurations        = 1
 };
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED
@@ -147,7 +146,6 @@ UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
 };
 #endif
 
-
 /**
  * \name UDC structures which contains all USB Device definitions
  */

Marlin/src/HAL/DUE/usb/udi_msc.c

@@ -86,7 +86,6 @@ UDC_DESC_STORAGE udi_api_t udi_api_msc = {
 };
 //@}
 
-
 /**
  * \ingroup udi_msc_group
  * \defgroup udi_msc_group_internal Implementation of UDI MSC
@@ -137,7 +136,6 @@ volatile bool udi_msc_b_reset_trans = true;
 
 //@}
 
-
 /**
  * \name Internal routines
  */
@@ -190,7 +188,6 @@ static void udi_msc_cbw_received(udd_ep_status_t status,
 static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag);
 //@}
 
-
 /**
  * \name Routines to process small data packet
  */
@@ -217,7 +214,6 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
     udd_ep_id_t ep);
 //@}
 
-
 /**
  * \name Routines to process CSW packet
  */
@@ -250,7 +246,6 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
     udd_ep_id_t ep);
 //@}
 
-
 /**
  * \name Routines manage sense data
  */
@@ -307,7 +302,6 @@ static void udi_msc_sense_fail_cdb_invalid(void);
 static void udi_msc_sense_command_invalid(void);
 //@}
 
-
 /**
  * \name Routines manage SCSI Commands
  */

Marlin/src/HAL/DUE/usb/uotghs_device_due.c

@@ -293,7 +293,6 @@ do { \
 # endif
 #endif
 
-
 /**
  * \name Power management routine.
  */
@@ -310,7 +309,6 @@ static bool udd_b_idle;
 //! State of sleep manager
 static bool udd_b_sleep_initialized = false;
 
-
 /*! \brief Authorize or not the CPU powerdown mode
  *
  * \param b_enable true to authorize idle mode
@@ -338,7 +336,6 @@ static void udd_sleep_mode(bool b_idle)
 
 //@}
 
-
 /**
  * \name Control endpoint low level management routine.
  *
@@ -410,7 +407,6 @@ static void udd_ctrl_send_zlp_out(void);
 //! \brief Call callback associated to setup request
 static void udd_ctrl_endofrequest(void);
 
-
 /**
  * \brief Main interrupt routine for control endpoint
  *
@@ -422,7 +418,6 @@ static bool udd_ctrl_interrupt(void);
 
 //@}
 
-
 /**
  * \name Management of bulk/interrupt/isochronous endpoints
  *
@@ -460,7 +455,6 @@ typedef struct {
 	uint8_t stall_requested:1;
 } udd_ep_job_t;
 
-
 //! Array to register a job on bulk/interrupt/isochronous endpoint
 static udd_ep_job_t udd_ep_job[USB_DEVICE_MAX_EP];
 
@@ -522,7 +516,6 @@ static bool udd_ep_interrupt(void);
 #endif // (0!=USB_DEVICE_MAX_EP)
 //@}
 
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED GLOBAL EVENTS
 
@@ -671,13 +664,11 @@ udd_interrupt_sof_end:
 	return;
 }
 
-
 bool udd_include_vbus_monitoring(void)
 {
 	return true;
 }
 
-
 void udd_enable(void)
 {
 	irqflags_t flags;
@@ -764,7 +755,6 @@ void udd_enable(void)
 	cpu_irq_restore(flags);
 }
 
-
 void udd_disable(void)
 {
 	irqflags_t flags;
@@ -866,7 +856,6 @@ void udd_attach(void)
 	cpu_irq_restore(flags);
 }
 
-
 void udd_detach(void)
 {
 	otg_unfreeze_clock();
@@ -883,7 +872,6 @@ void udd_detach(void)
 	udd_sleep_mode(false);
 }
 
-
 bool udd_is_high_speed(void)
 {
 #ifdef USB_DEVICE_HS_SUPPORT
@@ -893,7 +881,6 @@ bool udd_is_high_speed(void)
 #endif
 }
 
-
 void udd_set_address(uint8_t address)
 {
 	udd_disable_address();
@@ -901,13 +888,11 @@ void udd_set_address(uint8_t address)
 	udd_enable_address();
 }
 
-
 uint8_t udd_getaddress(void)
 {
 	return udd_get_configured_address();
 }
 
-
 uint16_t udd_get_frame_number(void)
 {
 	return udd_frame_number();
@@ -930,14 +915,12 @@ void udd_send_remotewakeup(void)
 	}
 }
 
-
 void udd_set_setup_payload(uint8_t *payload, uint16_t payload_size)
 {
 	udd_g_ctrlreq.payload = payload;
 	udd_g_ctrlreq.payload_size = payload_size;
 }
 
-
 #if (0 != USB_DEVICE_MAX_EP)
 bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 		uint16_t MaxEndpointSize)
@@ -1061,7 +1044,6 @@ bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 	return true;
 }
 
-
 void udd_ep_free(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1074,14 +1056,12 @@ void udd_ep_free(udd_ep_id_t ep)
 	udd_ep_job[ep_index - 1].stall_requested = false;
 }
 
-
 bool udd_ep_is_halted(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
 	return Is_udd_endpoint_stall_requested(ep_index);
 }
 
-
 bool udd_ep_set_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1122,7 +1102,6 @@ bool udd_ep_set_halt(udd_ep_id_t ep)
 	return true;
 }
 
-
 bool udd_ep_clear_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1163,7 +1142,6 @@ bool udd_ep_clear_halt(udd_ep_id_t ep)
 	return true;
 }
 
-
 bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 		uint8_t * buf, iram_size_t buf_size,
 		udd_callback_trans_t callback)
@@ -1230,7 +1208,6 @@ bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 #endif
 }
 
-
 void udd_ep_abort(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1259,7 +1236,6 @@ void udd_ep_abort(udd_ep_id_t ep)
 	udd_ep_abort_job(ep);
 }
 
-
 bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 		udd_callback_halt_cleared_t callback)
 {
@@ -1294,7 +1270,6 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 }
 #endif // (0 != USB_DEVICE_MAX_EP)
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 
 void udd_test_mode_j(void)
@@ -1303,20 +1278,17 @@ void udd_test_mode_j(void)
 	udd_enable_hs_test_mode_j();
 }
 
-
 void udd_test_mode_k(void)
 {
 	udd_enable_hs_test_mode();
 	udd_enable_hs_test_mode_k();
 }
 
-
 void udd_test_mode_se0_nak(void)
 {
 	udd_enable_hs_test_mode();
 }
 
-
 void udd_test_mode_packet(void)
 {
 	uint8_t i;
@@ -1360,8 +1332,6 @@ void udd_test_mode_packet(void)
 }
 #endif // USB_DEVICE_HS_SUPPORT
 
-
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE CONTROL ENDPOINT
 
@@ -1411,7 +1381,6 @@ static void udd_ctrl_init(void)
 	udd_ep_control_state = UDD_EPCTRL_SETUP;
 }
 
-
 static void udd_ctrl_setup_received(void)
 {
 	irqflags_t flags;
@@ -1473,7 +1442,6 @@ static void udd_ctrl_setup_received(void)
 	}
 }
 
-
 static void udd_ctrl_in_sent(void)
 {
 	static bool b_shortpacket = false;
@@ -1557,7 +1525,6 @@ static void udd_ctrl_in_sent(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_out_received(void)
 {
 	irqflags_t flags;
@@ -1648,7 +1615,6 @@ static void udd_ctrl_out_received(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_underflow(void)
 {
 	if (Is_udd_out_received(0))
@@ -1665,7 +1631,6 @@ static void udd_ctrl_underflow(void)
 	}
 }
 
-
 static void udd_ctrl_overflow(void)
 {
 	if (Is_udd_in_send(0))
@@ -1681,7 +1646,6 @@ static void udd_ctrl_overflow(void)
 	}
 }
 
-
 static void udd_ctrl_stall_data(void)
 {
 	// Stall all packets on IN & OUT control endpoint
@@ -1689,7 +1653,6 @@ static void udd_ctrl_stall_data(void)
 	udd_enable_stall_handshake(0);
 }
 
-
 static void udd_ctrl_send_zlp_in(void)
 {
 	irqflags_t flags;
@@ -1707,7 +1670,6 @@ static void udd_ctrl_send_zlp_in(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_send_zlp_out(void)
 {
 	irqflags_t flags;
@@ -1723,7 +1685,6 @@ static void udd_ctrl_send_zlp_out(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_endofrequest(void)
 {
 	// If a callback is registered then call it
@@ -1732,7 +1693,6 @@ static void udd_ctrl_endofrequest(void)
 	}
 }
 
-
 static bool udd_ctrl_interrupt(void)
 {
 
@@ -1783,7 +1743,6 @@ static bool udd_ctrl_interrupt(void)
 	return false;
 }
 
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE BULK/INTERRUPT/ISOCHRONOUS ENDPOINTS
 
@@ -1798,7 +1757,6 @@ static void udd_ep_job_table_reset(void)
 	}
 }
 
-
 static void udd_ep_job_table_kill(void)
 {
 	uint8_t i;
@@ -1809,7 +1767,6 @@ static void udd_ep_job_table_kill(void)
 	}
 }
 
-
 static void udd_ep_abort_job(udd_ep_id_t ep)
 {
 	ep &= USB_EP_ADDR_MASK;
@@ -1818,7 +1775,6 @@ static void udd_ep_abort_job(udd_ep_id_t ep)
 	udd_ep_finish_job(&udd_ep_job[ep - 1], true, ep);
 }
 
-
 static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_num)
 {
 	if (ptr_job->busy == false) {
@@ -1889,7 +1845,6 @@ static void udd_ep_trans_done(udd_ep_id_t ep)
 		udd_dma_ctrl |= UOTGHS_DEVDMACONTROL_END_BUFFIT |
 				UOTGHS_DEVDMACONTROL_CHANN_ENB;
 
-
 		// Disable IRQs to have a short sequence
 		// between read of EOT_STA and DMA enable
 		flags = cpu_irq_save();

Marlin/src/HAL/DUE/usb/uotghs_device_due.h

@@ -129,7 +129,6 @@ extern "C" {
 #define Is_udd_vbus_transition()          (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUSTI))
 //! @}
 
-
 //! @name UOTGHS device attach control
 //! These macros manage the UOTGHS Device attach.
 //! @{
@@ -141,7 +140,6 @@ extern "C" {
 #define Is_udd_detached()                 (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
 //! @}
 
-
 //! @name UOTGHS device bus events control
 //! These macros manage the UOTGHS Device bus events.
 //! @{
@@ -246,7 +244,6 @@ extern "C" {
 #define udd_get_configured_address()              (Rd_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk))
 //! @}
 
-
 //! @name UOTGHS Device endpoint drivers
 //! These macros manage the common features of the endpoints.
 //! @{
@@ -330,7 +327,6 @@ extern "C" {
 #define udd_data_toggle(ep)                       (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_DTSEQ_Msk))
 //! @}
 
-
 //! @name UOTGHS Device control endpoint
 //! These macros control the endpoints.
 //! @{
@@ -530,7 +526,6 @@ extern "C" {
   //! Tests if IN sending interrupt is enabled
 #define Is_udd_in_send_interrupt_enabled(ep)      (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_TXINE))
 
-
   //! Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected endpoint.
   //! @param ep Endpoint of which to access FIFO data register
   //! @param scale Data scale in bits: 64, 32, 16 or 8
@@ -652,7 +647,6 @@ typedef struct {
 //! @}
 //! @}
 
-
 /// @cond 0
 /**INDENT-OFF**/
 #ifdef __cplusplus

Marlin/src/HAL/DUE/usb/uotghs_otg.h

@@ -53,7 +53,6 @@
 extern "C" {
 #endif
 
-
 //! \ingroup usb_group
 //! \defgroup otg_group UOTGHS OTG Driver
 //! UOTGHS low-level driver for OTG features
@@ -74,7 +73,6 @@ bool otg_dual_enable(void);
  */
 void otg_dual_disable(void);
 
-
 //! @name UOTGHS OTG ID pin management
 //! The ID pin come from the USB OTG connector (A and B receptable) and
 //! allows to select the USB mode host or device.

Marlin/src/HAL/DUE/usb/usb_protocol.h

@@ -374,7 +374,6 @@ typedef struct {
   uint8_t bNumDeviceCaps;
 } usb_dev_bos_desc_t;
 
-
 /**
  * \brief USB Device Capabilities - USB 2.0 Extension Descriptor structure
  *
@@ -411,7 +410,6 @@ typedef struct {
   uint8_t iFunction;        //!< Index of string descriptor
 } usb_association_desc_t;
 
-
 /**
  * \brief Standard USB configuration descriptor structure
  */
@@ -426,7 +424,6 @@ typedef struct {
   uint8_t bMaxPower;
 } usb_conf_desc_t;
 
-
 #define  USB_CONFIG_ATTR_MUST_SET         (1 << 7) //!< Must always be set
 #define  USB_CONFIG_ATTR_BUS_POWERED      (0 << 6) //!< Bus-powered
 #define  USB_CONFIG_ATTR_SELF_POWERED     (1 << 6) //!< Self-powered
@@ -475,7 +472,6 @@ typedef struct {
   uint8_t bInterval;
 } usb_ep_desc_t;
 
-
 /**
  * \brief A standard USB string descriptor structure
  */

Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h

@@ -168,7 +168,6 @@ COMPILER_PACK_SET(1)
 //! \name USB CDC Descriptors
 //@{
 
-
 //! CDC Header Functional Descriptor
 typedef struct {
   uint8_t bFunctionLength;
@@ -203,7 +202,6 @@ typedef struct {
   uint8_t bSlaveInterface0;
 } usb_cdc_union_desc_t;
 
-
 //! \name USB CDC Call Management Capabilities
 //@{
 //! Device handles call management itself
@@ -278,7 +276,6 @@ typedef struct {
 //@}
 //@}
 
-
 //! \name USB CDC notification message
 //@{
 

Marlin/src/HAL/DUE/usb/usb_protocol_msc.h

@@ -47,7 +47,6 @@
 #ifndef _USB_PROTOCOL_MSC_H_
 #define _USB_PROTOCOL_MSC_H_
 
-
 /**
  * \ingroup usb_protocol_group
  * \defgroup usb_msc_protocol USB Mass Storage Class (MSC) protocol definitions
@@ -89,7 +88,6 @@
 #define MSC_PROTOCOL_BULK           0x50  //!< Bulk-only
 //@}
 
-
 /**
  * \brief MSC USB requests (bRequest)
  */
@@ -98,7 +96,6 @@ enum usb_reqid_msc {
   USB_REQ_MSC_GET_MAX_LUN = 0xFE  //!< Get Max LUN
 };
 
-
 COMPILER_PACK_SET(1)
 
 /**
@@ -122,7 +119,6 @@ struct usb_msc_cbw {
 #define USB_CBW_LEN_MASK            0x1F  //!< Valid bits in bCBWCBLength
 //@}
 
-
 /**
  * \name A Command Status Wrapper (CSW).
  */

Marlin/src/HAL/LINUX/servo_private.h

@@ -60,7 +60,6 @@
 
 #define INVALID_SERVO         255     // flag indicating an invalid servo index
 
-
 // Types
 
 typedef struct {

Marlin/src/HAL/LPC1768/win_usb_driver/lpc176x_usb_driver.inf

@@ -8,14 +8,12 @@ DriverVer =04/14/2008, 5.1.2600.5512
 [Manufacturer]
 %PROVIDER%=DeviceList,ntamd64
 
-
 [DeviceList]
 %DESCRIPTION%=LPC1768USB, USB\VID_1D50&PID_6029&MI_00
 
 [DeviceList.ntamd64]
 %DESCRIPTION%=LPC1768USB, USB\VID_1D50&PID_6029&MI_00
 
-
 [LPC1768USB]
 include=mdmcpq.inf
 CopyFiles=FakeModemCopyFileSection
@@ -28,9 +26,8 @@ AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 [SerialPropPageAddReg]
 HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
 
-
 [Strings]
 PROVIDER   = "marlinfw.org"
 DRIVER.SVC = "Marlin USB Driver"
 DESCRIPTION= "Marlin USB Serial"
-COMPOSITE  = "Marlin USB VCOM"
+COMPOSITE  = "Marlin USB VCOM"

Marlin/src/HAL/NATIVE_SIM/servo_private.h

@@ -61,7 +61,6 @@
 
 #define INVALID_SERVO         255     // flag indicating an invalid servo index
 
-
 // Types
 
 typedef struct {

Marlin/src/HAL/NATIVE_SIM/u8g/LCD_pin_routines.h

@@ -31,7 +31,6 @@
  * resulted in using about about 25% of the CPU's time.
  */
 
-
 #ifdef __cplusplus
   extern "C" {
 #endif

Marlin/src/HAL/SAMD21/HAL.cpp

@@ -40,8 +40,6 @@
   DefaultSerial3 MSerial2(false, Serial2);
 #endif
 
-
-
 #define WDT_CONFIG_PER_7_Val 0x9u
 #define WDT_CONFIG_PER_Pos 0
 #define WDT_CONFIG_PER_7 (WDT_CONFIG_PER_7_Val << WDT_CONFIG_PER_Pos)
@@ -165,7 +163,6 @@ void MarlinHAL::adc_init() {
   ADC->REFCTRL.reg = ADC_REFCTRL_REFSEL_INTVCC1;
   ADC->AVGCTRL.reg = ADC_AVGCTRL_SAMPLENUM_32| ADC_AVGCTRL_ADJRES(4);;
 
-
   ADC->CTRLB.reg = ADC_CTRLB_PRESCALER_DIV128 |
                  ADC_CTRLB_RESSEL_16BIT |
                  ADC_CTRLB_FREERUN;

Marlin/src/HAL/SAMD21/HAL.h

@@ -47,7 +47,6 @@ typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
 extern DefaultSerial2 MSerial0;
 extern DefaultSerial3 MSerial1;
 
-
 #define __MSERIAL(X) MSerial##X
 #define _MSERIAL(X) __MSERIAL(X)
 #define MSERIAL(X) _MSERIAL(INCREMENT(X))

Marlin/src/HAL/SAMD21/SAMD21.h

@@ -57,8 +57,6 @@
                                        : (P == 3 && WITHIN(B, 20, 21)) ? 10 + (B) - 20                                        \
                                        : -1)
 
-
-
 #define A2_AIN 3
 #define A3_AIN 4
 #define A4_AIN 5

Marlin/src/HAL/SAMD21/Servo.cpp

@@ -55,7 +55,6 @@
 #define TIMER_TCCHANNEL(t)      ((t) & 1)
 #define TC_COUNTER_START_VAL    0xFFFF
 
-
 static volatile int8_t currentServoIndex[_Nbr_16timers];    // index for the servo being pulsed for each timer (or -1 if refresh interval)
 
 FORCE_INLINE static uint16_t getTimerCount() {

Marlin/src/HAL/SAMD21/u8g/u8g_com_HAL_samd21_shared_hw_spi.cpp

@@ -85,7 +85,6 @@ void u8g_SetPILevel(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
 
 uint8_t u8g_com_samd21_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
 
-
   switch (msg) {
     case U8G_COM_MSG_STOP:
       break;

Marlin/src/HAL/SAMD51/Servo.cpp

@@ -54,7 +54,6 @@
 #define TIMER_TCCHANNEL(t)      ((t) & 1)
 #define TC_COUNTER_START_VAL    0xFFFF
 
-
 static volatile int8_t currentServoIndex[_Nbr_16timers];    // index for the servo being pulsed for each timer (or -1 if refresh interval)
 
 FORCE_INLINE static uint16_t getTimerCount() {

Marlin/src/HAL/STM32/inc/SanityCheck.h

@@ -28,7 +28,6 @@
 //  #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
 //#endif
 
-
 #if ENABLED(SDCARD_EEPROM_EMULATION) && !HAS_MEDIA
   #undef SDCARD_EEPROM_EMULATION // Avoid additional error noise
   #if USE_FALLBACK_EEPROM

Marlin/src/HAL/STM32F1/HAL_N32.h

@@ -850,7 +850,6 @@ typedef struct {
   __IO uint32_t BDCR;       /* compatible */
   __IO uint32_t CSR;        /* compatible */
 
-
   __IO uint32_t AHBRSTR;    /* Not compatible, ADC reset here settings */
   __IO uint32_t CFGR2;      /* Not compatible, ADC clock settings here */
   __IO uint32_t CFGR3;      /* Not compatible, add a new register */

Marlin/src/HAL/STM32F1/SPI.cpp

@@ -517,7 +517,6 @@ uint8_t SPIClass::dmaSendAsync(const void * transmitBuf, uint16_t length, bool m
   return b;
 }
 
-
 /**
  *  New functions added to manage callbacks.
  *  Victor Perez 2017

Marlin/src/HAL/STM32F1/maple_win_usb_driver/maple_serial.inf

@@ -48,7 +48,6 @@ ServiceBinary=%12%\usbser.sys
 ;  String Definitions
 ;------------------------------------------------------------------------------
 
-
 [Strings]
 STM         = "LeafLabs"
 MFGNAME     = "LeafLabs"

Marlin/src/HAL/STM32F1/onboard_sd.h

@@ -47,7 +47,6 @@ typedef enum {
   RES_PARERR      /* 4: Invalid Parameter */
 } DRESULT;
 
-
 #if _DISKIO_ISDIO
 /* Command structure for iSDIO ioctl command */
 typedef struct {

Marlin/src/HAL/STM32F1/sdio.h

@@ -60,7 +60,6 @@
 #define ACMD41_SD_APP_OP_COND                         (uint16_t)(SDMMC_ACMD_SD_APP_OP_COND | SDIO_CMD_WAIT_SHORT_RESP)
 #define ACMD42_SD_APP_SET_CLR_CARD_DETECT             (uint16_t)(SDMMC_ACMD_SD_APP_SET_CLR_CARD_DETECT | SDIO_CMD_WAIT_SHORT_RESP)
 
-
 #define SDMMC_ALLZERO                        0x00000000U
 #define SDMMC_OCR_ERRORBITS                  0xFDFFE008U
 

Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp

@@ -120,7 +120,6 @@ void spiSendBlock(uint8_t token, const uint8_t *buf) {
   SPI.endTransaction();
 }
 
-
 // Begin SPI transaction, set clock, bit order, data mode
 void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
   spiConfig = SPISettings(spiClock, bitOrder, dataMode);

Marlin/src/HAL/shared/Delay.cpp

@@ -161,7 +161,6 @@
     }
   #endif // MARLIN_DEV_MODE
 
-
 #else
 
   void calibrate_delay_loop() {}

Marlin/src/HAL/shared/backtrace/unwarm.cpp

@@ -50,7 +50,6 @@ void UnwInvalidateRegisterFile(RegData *regFile) {
   } while (t < 13);
 }
 
-
 /**
  * Initialize the data used for unwinding.
  */
@@ -129,7 +128,6 @@ bool UnwReportRetAddr(UnwState * const state, uint32_t addr) {
   return state->cb->report((void *)state->reportData, &entry);
 }
 
-
 /**
  * Write some register to memory.
  * This will store some register and meta data onto the virtual stack.

Marlin/src/HAL/shared/backtrace/unwarm.h

@@ -41,7 +41,6 @@ typedef enum {
   REG_VAL_ARITHMETIC  = 0x80
 } RegValOrigin;
 
-
 /** Type for tracking information about a register.
  * This stores the register value, as well as other data that helps unwinding.
  */
@@ -56,7 +55,6 @@ typedef struct {
   int o; /* (RegValOrigin) */
 } RegData;
 
-
 /** Structure used to track reads and writes to memory.
  * This structure is used as a hash to store a small number of writes
  * to memory.
@@ -81,7 +79,6 @@ typedef struct {
   uint8_t tracked[(MEM_HASH_SIZE + 7) / 8];
 } MemData;
 
-
 /** Structure that is used to keep track of unwinding meta-data.
  * This data is passed between all the unwinding functions.
  */

Marlin/src/HAL/shared/cpu_exception/exception_arm.cpp

@@ -26,7 +26,6 @@
 
 #if defined(__arm__) || defined(__thumb__)
 
-
 /*
   On ARM CPUs exception handling is quite powerful.
 

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -615,7 +615,6 @@ void unified_bed_leveling::G29() {
 
   #endif // UBL_DEVEL_DEBUGGING
 
-
   //
   // Load a Mesh from the EEPROM
   //

Marlin/src/feature/encoder_i2c.cpp

@@ -27,7 +27,6 @@
 //todo:  try faster I2C speed; tweak TWI_FREQ (400000L, or faster?); or just TWBR = ((CPU_FREQ / 400000L) - 16) / 2;
 //todo:    consider Marlin-optimized Wire library; i.e. MarlinWire, like MarlinSerial
 
-
 #include "../inc/MarlinConfig.h"
 
 #if ENABLED(I2C_POSITION_ENCODERS)
@@ -462,7 +461,6 @@ void I2CPositionEncoder::reset() {
   TERN_(I2CPE_ERR_ROLLING_AVERAGE, ZERO(err));
 }
 
-
 bool I2CPositionEncodersMgr::I2CPE_anyaxis;
 uint8_t I2CPositionEncodersMgr::I2CPE_addr,
         I2CPositionEncodersMgr::I2CPE_idx;

Marlin/src/feature/fwretract.cpp

@@ -263,5 +263,4 @@ void FWRetract::M208_report() {
 
 #endif // FWRETRACT_AUTORETRACT
 
-
 #endif // FWRETRACT

Marlin/src/feature/meatpack.h

@@ -144,7 +144,6 @@ struct MeatpackSerial : public SerialBase <MeatpackSerial < SerialT >> {
   void flushTX()                      { CALL_IF_EXISTS(void, &out, flushTX); }
   SerialFeature features(serial_index_t index) const  { return SerialFeature::MeatPack | CALL_IF_EXISTS(SerialFeature, &out, features, index);  }
 
-
   int available(serial_index_t index) {
     if (charCount) return charCount;          // The buffer still has data
     if (out.available(index) <= 0) return 0;  // No data to read

Marlin/src/feature/mmu/mmu2-serial-protocol.md

@@ -28,11 +28,8 @@ Now we are sure MMU is available and ready. If there was a timeout or other comm
 - *Build number* is an integer value and has to be >=126, or =>132 if 12V mode is enabled
 - *FINDA status* is 1 if the filament is loaded to the extruder, 0 otherwise
 
-
 *Build number* is checked against the required value, if it does not match, printer is halted.
 
-
-
 Toolchange
 ==========
 
@@ -54,7 +51,6 @@ When done, the MMU sends
 We don't wait for a response here but immediately continue with the next G-code which should
 be one or more extruder moves to feed the filament into the hotend.
 
-
 FINDA status
 ============
 
@@ -63,8 +59,6 @@ FINDA status
 
 *FINDA status* is 1 if the is filament loaded to the extruder, 0 otherwise. This could be used as filament runout sensor if probed regularly.
 
-
-
 Load filament
 =============
 
@@ -74,7 +68,6 @@ MMU will feed filament down to the extruder, when done
 
 - MMU => 'ok\n'
 
-
 Unload filament
 =============
 
@@ -84,8 +77,6 @@ MMU will retract current filament from the extruder, when done
 
 - MMU => 'ok\n'
 
-
-
 Eject filament
 ==============
 

Marlin/src/feature/runout.h

@@ -341,7 +341,6 @@ class FilamentSensorBase {
       }
   };
 
-
 /********************************* RESPONSE TYPE *********************************/
 
 #if HAS_FILAMENT_RUNOUT_DISTANCE

Marlin/src/feature/spindle_laser.h

@@ -38,7 +38,6 @@
 #define PCT_TO_PWM(X) ((X) * 255 / 100)
 #define PCT_TO_SERVO(X) ((X) * 180 / 100)
 
-
 // Laser/Cutter operation mode
 enum CutterMode : int8_t {
   CUTTER_MODE_ERROR = -1,

Marlin/src/feature/stepper_driver_safety.h

@@ -21,7 +21,6 @@
  */
 #pragma once
 
-
 #include "../inc/MarlinConfigPre.h"
 
 void stepper_driver_backward_check();

Marlin/src/feature/twibus.h

@@ -74,7 +74,6 @@ class TWIBus {
      */
     uint8_t buffer[TWIBUS_BUFFER_SIZE];
 
-
   public:
     /**
      * @brief Target device address

Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp

@@ -449,7 +449,6 @@ static const hd44780_charmap_t g_hd44780_charmap_device[] PROGMEM = {
     {IV('⭢'), 0xC7, 0},
     {IV('⭣'), 0xC6, 0},
 
-
     {IV('⯆'), 0xF5, 0},
     {IV('⯇'), 0xF7, 0}, // ⯅
     {IV('⯈'), 0xF6, 0},
@@ -500,7 +499,6 @@ static const hd44780_charmap_t g_hd44780_charmap_device[] PROGMEM = {
     //{IV(''), 0x9E, 0},
     //{IV(''), 0x9F, 0},
 
-
     {IV('¼'), 0xF0, 0}, // 00BC
     {IV('⅓'), 0xF1, 0},
     {IV('½'), 0xF2, 0}, // 00BD

Marlin/src/lcd/TFTGLCD/lcdprint_TFTGLCD.cpp

@@ -446,7 +446,6 @@ static const TFTGLCD_charmap_t g_TFTGLCD_charmap_device[] PROGMEM = {
     {IV('⭢'), 0xC7, 0},
     {IV('⭣'), 0xC6, 0},
 
-
     {IV('⯆'), 0xF5, 0},
     {IV('⯇'), 0xF7, 0}, // ⯅
     {IV('⯈'), 0xF6, 0},

Marlin/src/lcd/dogm/HAL_LCD_class_defines.h

@@ -103,7 +103,6 @@ public:
   void init(uint8_t cs, uint8_t rs, uint8_t reset=U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
 };
 
-
 extern u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, u8g_dev_uc1701_mini12864_HAL_2x_hw_spi;
 
 class U8GLIB_MINI12864_2X_HAL : public U8GLIB {

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -376,7 +376,6 @@ FORCE_INLINE void _draw_centered_temp(const celsius_t temp, const uint8_t tx, co
 
       #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
 
-
       // Draw a heating progress bar, if specified
       #if ANY(STATUS_HEAT_PERCENT, STATUS_HEAT_POWER)
         uint8_t tall = 0;

Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp

@@ -230,12 +230,10 @@ uint8_t u8g_dev_ssd1306_128x64_2x_2_wire_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t
   return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
 }
 
-
 uint8_t u8g_dev_ssd1306_128x64_2x_i2c_2_wire_buf[WIDTH*2] U8G_NOCOMMON ;
 u8g_pb_t u8g_dev_ssd1306_128x64_2x_i2c_2_wire_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1306_128x64_2x_i2c_2_wire_buf};
 u8g_dev_t u8g_dev_ssd1306_128x64_2x_i2c_2_wire = { u8g_dev_ssd1306_128x64_2x_2_wire_fn, &u8g_dev_ssd1306_128x64_2x_i2c_2_wire_pb, U8G_COM_SSD_I2C_HAL };
 
-
 /////////////////////////////////////////////////////////////////////////////////////////////
 
 // This routine adds the instruction byte in between the command bytes.  This makes the init

Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp

@@ -234,7 +234,6 @@ uint8_t u8g_dev_st7565_64128n_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ;
 u8g_pb_t u8g_dev_st7565_64128n_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_st7565_64128n_HAL_2x_buf};
 u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_sw_spi = { u8g_dev_st7565_64128n_HAL_2x_fn, &u8g_dev_st7565_64128n_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN };
 
-
 U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_HW_SPI_FN);
 u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_hw_spi = { u8g_dev_st7565_64128n_HAL_2x_fn, &u8g_dev_st7565_64128n_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN };
 

Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp

@@ -84,19 +84,19 @@ static const uint8_t u8g_dev_st7920_128x64_HAL_init_seq[] PROGMEM = {
 void clear_graphics_DRAM(u8g_t *u8g, u8g_dev_t *dev) {
   u8g_SetChipSelect(u8g, dev, 1);
   u8g_Delay(1);
-  u8g_SetAddress(u8g, dev, 0);         // cmd mode
+  u8g_SetAddress(u8g, dev, 0);                    // Cmd mode
-  u8g_WriteByte(u8g, dev, 0x08);       //display off, cursor+blink off
+  u8g_WriteByte(u8g, dev, 0x08);                  // Display off, cursor+blink off
-  u8g_WriteByte(u8g, dev, 0x3E);       //extended mode + GDRAM active
+  u8g_WriteByte(u8g, dev, 0x3E);                  // Extended mode + GDRAM active
-  for (uint8_t y = 0; y < (LCD_PIXEL_HEIGHT) / 2; ++y) { //clear GDRAM
+  for (uint8_t y = 0; y < (LCD_PIXEL_HEIGHT) / 2; ++y) {  // Clear GDRAM
-    u8g_WriteByte(u8g, dev, 0x80 | y); //set y
+    u8g_WriteByte(u8g, dev, 0x80 | y);            // Set y
-    u8g_WriteByte(u8g, dev, 0x80);     //set x = 0
+    u8g_WriteByte(u8g, dev, 0x80);                // Set x = 0
-    u8g_SetAddress(u8g, dev, 1);                  /* data mode */
+    u8g_SetAddress(u8g, dev, 1);                  // Data mode
-    for (uint8_t i = 0; i < 2 * (LCD_PIXEL_WIDTH) / 8; ++i) //2x width clears both segments
+    for (uint8_t i = 0; i < 2 * (LCD_PIXEL_WIDTH) / 8; ++i) // 2x width clears both segments
       u8g_WriteByte(u8g, dev, 0);
-    u8g_SetAddress(u8g, dev, 0);           /* cmd mode */
+    u8g_SetAddress(u8g, dev, 0);                  // Cmd mode
   }
 
-  u8g_WriteByte(u8g, dev, 0x0C); //display on, cursor+blink off
+  u8g_WriteByte(u8g, dev, 0x0C);                  // Display on, cursor+blink off
 
   u8g_SetChipSelect(u8g, dev, 0);
 }

Marlin/src/lcd/e3v2/common/dwin_api.h

@@ -162,7 +162,6 @@ inline void dwinDrawBox(uint8_t mode, uint16_t color, uint16_t xStart, uint16_t
 void dwinFrameAreaMove(uint8_t mode, uint8_t dir, uint16_t dis,
                          uint16_t color, uint16_t xStart, uint16_t yStart, uint16_t xEnd, uint16_t yEnd);
 
-
 /*---------------------------------------- Text related functions ----------------------------------------*/
 
 // Draw a string

Marlin/src/lcd/e3v2/marlinui/dwin_string.h

@@ -525,7 +525,6 @@ const dwin_charmap_t g_dwin_charmap_device[] PROGMEM = {
     {IV('⭢'), 0xC7, 0},
     {IV('⭣'), 0xC6, 0},
 
-
     {IV('⯆'), 0xF5, 0},
     {IV('⯇'), 0xF7, 0}, // ⯅
     {IV('⯈'), 0xF6, 0},
@@ -576,7 +575,6 @@ const dwin_charmap_t g_dwin_charmap_device[] PROGMEM = {
     //{IV(''), 0x9E, 0},
     //{IV(''), 0x9F, 0},
 
-
     {IV('¼'), 0xF0, 0}, // 00BC
     {IV('⅓'), 0xF1, 0},
     {IV('½'), 0xF2, 0}, // 00BD

Marlin/src/lcd/extui/anycubic_vyper/dgus_tft.h

@@ -281,7 +281,6 @@
 #define KEY_LEVEL_DEC           2
 #define KEY_LEVEL_ENSURE        4
 
-
 #define KEY_PREPARE_TO_PREHEAT  3
 #define KEY_PREHEAT_TO_PREPARE  1
 #define KEY_PREHEAT_PLA         2

Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.h

@@ -241,7 +241,6 @@ enum DGUS_ScreenID : uint8_t {
   DGUS_SCREEN_UNUSED                 = 255
 };
 
-
 // Place for status messages.
 constexpr uint16_t VP_M117 = 0x7020;
 constexpr uint8_t VP_M117_LEN = 0x20;
@@ -299,7 +298,6 @@ constexpr uint16_t SP_T_Bed_Set   = 0x5040;
   constexpr uint16_t VP_MARLIN_VERSION                = 0x1A00;
   constexpr uint8_t VP_MARLIN_VERSION_LEN             = 16;       // there is more space on the display, if needed.
 
-
   constexpr uint16_t VP_SCREENCHANGE_ASK              = 0x1500;
   constexpr uint16_t VP_SCREENCHANGE                  = 0x1501;   // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte.
   constexpr uint16_t VP_TEMP_ALL_OFF                  = 0x1502;   // Turn all heaters off. Value arbitrary ;)=
@@ -515,7 +513,6 @@ constexpr uint16_t SP_T_Bed_Set   = 0x5040;
   constexpr uint16_t VP_TMC_E1_Current                = 0x3442;
   constexpr uint16_t VP_TMC_Z1_Current                = 0x3444;
 
-
   constexpr uint16_t VP_PrintTime_H                   = 0x3500;
   constexpr uint16_t VP_PrintTime_M                   = 0x3502;
   constexpr uint16_t VP_PrintTime_S                   = 0x3504;
@@ -591,7 +588,6 @@ constexpr uint16_t SP_T_Bed_Set   = 0x5040;
   constexpr uint16_t VP_Level_Point_Five_X             = 0x4110;
   constexpr uint16_t VP_Level_Point_Five_Y             = 0x4112;
 
-
   /* H43 Version */
   constexpr uint16_t VP_MKS_H43_VERSION                = 0x4A00;   // MKS H43 V1.0.0
   constexpr uint16_t VP_MKS_H43_VERSION_LEN            = 16;
@@ -630,7 +626,6 @@ constexpr uint16_t SP_T_Bed_Set   = 0x5040;
   constexpr uint16_t VP_E0_Max_Acc_Speed_Dis          = 0x5210;
   constexpr uint16_t VP_E1_Max_Acc_Speed_Dis          = 0x5220;
 
-
   constexpr uint16_t VP_PrintTime_Dis                 = 0x5470;
   constexpr uint16_t VP_E0_Temp_Dis                   = 0x5310;
   constexpr uint16_t VP_E1_Temp_Dis                   = 0x5320;
@@ -641,12 +636,10 @@ constexpr uint16_t SP_T_Bed_Set   = 0x5040;
 
   constexpr uint16_t VP_Min_Ex_Temp_Dis               = 0x5380;
 
-
   constexpr uint16_t VP_X_PARK_POS_Dis                = 0x53E0;
   constexpr uint16_t VP_Y_PARK_POS_Dis                = 0x53F0;
   constexpr uint16_t VP_Z_PARK_POS_Dis                = 0x5400;
 
-
   constexpr uint16_t VP_TravelAcc_Dis                 = 0x5440;
   constexpr uint16_t VP_FeedRateMin_Dis               = 0x5450;
   constexpr uint16_t VP_TravelFeeRateMin_Dis          = 0x5460;

Marlin/src/lcd/extui/dgus_e3s1pro/definition/DGUS_ScreenAddrList.cpp

@@ -153,7 +153,6 @@ constexpr DGUS_Addr LIST_CONTROL[] PROGMEM = {
   DGUS_Addr::END
 };
 
-
 constexpr DGUS_Addr LIST_ADJUST[] PROGMEM = {
   DGUS_Addr::ADJUST_Icon_Adjust,
   DGUS_Addr::IO_Icon_ExtruderTemp,

Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/screens.h

@@ -22,7 +22,6 @@
 
 #pragma once
 
-
 /********************************* DL CACHE SLOTS ******************************/
 
 // In order to reduce SPI traffic, we cache display lists (DL) in RAMG. This

Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/statistics_screen.cpp

@@ -38,7 +38,6 @@ void StatisticsScreen::onRedraw(draw_mode_t what) {
   if (what & BACKGROUND) {
     char buffer[21];
 
-
     cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color))
        .cmd(CLEAR(true,true,true))
        .cmd(COLOR_RGB(bg_text_enabled))

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h

@@ -248,7 +248,6 @@
 
 #endif
 
-
 /* this data is used to patch FT813 displays that use a GT911 as a touch-controller */
 #ifdef PATCH_GT911
   constexpr PROGMEM unsigned char GT911_data[] = {

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp

@@ -71,7 +71,6 @@ void UIData::set_persistent_data(uint8_t value) {
   flags.value = value & get_persistent_data_mask();
 }
 
-
 void UIData::enable_touch_sounds(bool enabled) {
   UIData::flags.bits.touch_start_sound  = enabled;
   UIData::flags.bits.touch_end_sound    = enabled;

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/cyrillic_char_set_bitmap_31.h

@@ -100,7 +100,6 @@ const uint8_t cyrillic_font_widths[] PROGMEM = {
   21, // ё
 };
 
-
 /* This is a dump of "font_bitmaps/cyrillic_char_set_bitmap_31.png"
  * using the tool "bitmap2cpp.py". The tool converts the image into
  * 16-level grayscale and packs two pixels per byte. The resulting

Marlin/src/lcd/extui/ftdi_eve_touch_ui/language/language.cpp

@@ -19,7 +19,6 @@
  *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
-
 #include "../../../../MarlinCore.h"
 #if ENABLED(TOUCH_UI_FTDI_EVE)
   #include "language.h"

Marlin/src/lcd/extui/ftdi_eve_touch_ui/screens.cpp

@@ -26,7 +26,6 @@
 #include "screens.h"
 tiny_timer_t refresh_timer;
 
-
 /**
  * DECL_SCREEN_IF_INCLUDED allows for a concise
  * definition of SCREEN_TABLE:

Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.cpp

@@ -165,7 +165,6 @@ namespace Theme {
     {ORGAN,        NOTE_A4,  4},
     {SILENCE,      REST,     36},
 
-
     {ORGAN,        NOTE_C5S, 4},
     {ORGAN,        NOTE_D5,  2},
     {ORGAN,        NOTE_E5,  2},

Marlin/src/lcd/extui/ia_creality/FileNavigator.cpp

@@ -91,7 +91,6 @@ void FileNavigator::getFiles(uint16_t index) {
   }
   lastindex = index;
 
-
   // Clear currently drawn screen
   for (int i = 0; i < DISPLAY_FILES; i++) {
     for (int j = 0; j < 20; j++)

Marlin/src/lcd/extui/malyan/malyan.cpp

@@ -106,7 +106,6 @@ void set_lcd_error(FSTR_P const error, FSTR_P const component/*=nullptr*/) {
   write_to_lcd(F("}"));
 }
 
-
 /**
  * Process an LCD 'C' command.
  * These are currently all temperature commands

Marlin/src/lcd/extui/mks_ui/SPIFlashStorage.cpp

@@ -158,7 +158,6 @@ void SPIFlashStorage::beginWrite(const uint32_t startAddress) {
   #endif
 }
 
-
 void SPIFlashStorage::endWrite() {
   // Flush remaining data
   #if HAS_SPI_FLASH_COMPRESSION

Marlin/src/lcd/extui/mks_ui/draw_wifi.h

@@ -25,7 +25,6 @@
   extern "C" {
 #endif
 
-
 void lv_draw_wifi();
 void lv_clear_wifi();
 void disp_wifi_state();

Marlin/src/lcd/extui/mks_ui/draw_wifi_tips.h

@@ -25,7 +25,6 @@
   extern "C" {
 #endif
 
-
 void lv_draw_wifi_tips();
 void lv_clear_wifi_tips();
 

Marlin/src/lcd/extui/mks_ui/tft_Language_fr.h

@@ -154,7 +154,6 @@
 #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_FR     "Chargement terminé,\n<confirmez> pour revenir!"
 #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_FR   "Déchargement terminé,\n<confirmez> pour revenir!"
 
-
 #define PRE_HEAT_EXT_TEXT_FR          "E"
 #define PRE_HEAT_BED_TEXT_FR          "Bed"
 

Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.h

@@ -40,11 +40,7 @@ void my_disp_flush(lv_disp_drv_t * disp, const lv_area_t * area, lv_color_t * co
 bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data);
 bool my_mousewheel_read(lv_indev_drv_t * indev_drv, lv_indev_data_t * data);
 
-void LCD_Clear(uint16_t color);
+void lcdClear(uint16_t color);
-void tft_set_point(uint16_t x, uint16_t y, uint16_t point);
-void LCD_setWindowArea(uint16_t StartX, uint16_t StartY, uint16_t width, uint16_t height);
-void LCD_WriteRAM_Prepare();
-void lcd_draw_logo();
 void lv_encoder_pin_init();
 void lv_update_encoder();
 

Marlin/src/lcd/language/language_pl.h

@@ -467,7 +467,6 @@ namespace LanguageNarrow_pl {
 
   LSTR MSG_GAMES                          = _UxGT("Gry");
 
-
   LSTR MSG_EDIT_PASSWORD                  = _UxGT("Zmień hasło");
   LSTR MSG_LOGIN_REQUIRED                 = _UxGT("Wymagane zalogowanie");
   LSTR MSG_PASSWORD_SETTINGS              = _UxGT("Ustawienia hasła");

Marlin/src/lcd/language/language_test.h

@@ -44,22 +44,18 @@
 //   Kanji (an other Japanese symbol set) uses far more than two codepages. So currently I don't see a chance to map the Unicodes. Its not
 //   impossible to have a close to direct mapping but will need giant conversion tables and fonts (we don't want to have in a embedded system).
 
-
 // Select the better font for full graphic displays.
 //#define DISPLAY_CHARSET_ISO10646_1
 //#define DISPLAY_CHARSET_ISO10646_5
 //#define DISPLAY_CHARSET_ISO10646_GREEK
 //#define DISPLAY_CHARSET_ISO10646_KANA
 
-
-
 // next 5 lines select variants in this file only
 #define DISPLAYTEST
 //#define WEST
 //#define CYRIL
 //#define KANA
 
-
 // TESTSTRINGS
 
 #define STRG_ASCII_2 _UxGT(" !\"#$%&'()*+,-./")

Marlin/src/lcd/language/language_uk.h

@@ -638,7 +638,6 @@ namespace LanguageNarrow_uk {
   LSTR MSG_REMINDER_SAVE_SETTINGS           = _UxGT("Не забудь зберегти!");
   LSTR MSG_PASSWORD_REMOVED                 = _UxGT("Пароль видалений");
 
-
   //
   // Filament Change screens show up to 2 lines on a 3-line display
   //

Marlin/src/lcd/menu/game/invaders.cpp

@@ -193,7 +193,6 @@ inline void reset_invaders() {
   reset_bullets();
 }
 
-
 inline void spawn_ufo() {
   idat.ufov = random(0, 2) ? 1 : -1;
   idat.ufox = idat.ufov > 0 ? -(UFO_W) : LCD_PIXEL_WIDTH - 1;

Marlin/src/lcd/tft/fontdata/Helvetica/Helvetica_19.cpp

@@ -45,7 +45,6 @@ extern const uint8_t Helvetica_Symbols_19[45] = {
   8,7,7,9,0,11,60,102,195,195,195,102,60,
 };
 
-
 // Helvetica, capital 'A' height: 19px
 extern const uint8_t Helvetica_19[7298] = {
   129,19,32,0,255,0,24,251, // unifont_t

Marlin/src/lcd/tft/fontdata/Unifont/LICENSE-OFL-1.1

@@ -1,7 +1,6 @@
 The SIL Open Font License version 1.1 is copied below, and is also
 available with a FAQ at http://scripts.sil.org/OFL.
 
-
 -----------------------------------------------------------
 SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
 -----------------------------------------------------------

Marlin/src/lcd/tft/tft_string.cpp

@@ -40,7 +40,6 @@ unifont_t *TFT_String::font_header;
   uint16_t TFT_String::extra_count;
 #endif
 
-
 uint16_t TFT_String::data[];
 uint16_t TFT_String::span;
 uint8_t TFT_String::length;