diff --git a/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp b/Marlin/src/HAL/STM32/sdio.cpp similarity index 98% rename from Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp rename to Marlin/src/HAL/STM32/sdio.cpp index 54e1820c78..18b4434dfa 100644 --- a/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp +++ b/Marlin/src/HAL/STM32/sdio.cpp @@ -28,6 +28,8 @@ #if ENABLED(SDIO_SUPPORT) +#include "sdio.h" + #include #include @@ -49,14 +51,6 @@ #error "SDIO only supported with STM32F103xE, STM32F103xG, STM32F4xx, or STM32F7xx." #endif -// Fixed -#define SDIO_D0_PIN PC8 -#define SDIO_D1_PIN PC9 -#define SDIO_D2_PIN PC10 -#define SDIO_D3_PIN PC11 -#define SDIO_CK_PIN PC12 -#define SDIO_CMD_PIN PD2 - SD_HandleTypeDef hsd; // create SDIO structure // F4 supports one DMA for RX and another for TX, but Marlin will never // do read and write at same time, so we use the same DMA for both. diff --git a/Marlin/src/HAL/STM32/sdio.h b/Marlin/src/HAL/STM32/sdio.h new file mode 100644 index 0000000000..cf5539c3c7 --- /dev/null +++ b/Marlin/src/HAL/STM32/sdio.h @@ -0,0 +1,29 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define SDIO_D0_PIN PC8 +#define SDIO_D1_PIN PC9 +#define SDIO_D2_PIN PC10 +#define SDIO_D3_PIN PC11 +#define SDIO_CK_PIN PC12 +#define SDIO_CMD_PIN PD2 diff --git a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h index eb3af65f32..43aefe97f5 100644 --- a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h +++ b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h @@ -203,19 +203,12 @@ #if ENABLED(SDSUPPORT) - #define SDIO_D0_PIN PC8 - #define SDIO_D1_PIN PC9 - #define SDIO_D2_PIN PC10 - #define SDIO_D3_PIN PC11 - #define SDIO_CK_PIN PC12 - #define SDIO_CMD_PIN PD2 - #if DISABLED(SDIO_SUPPORT) #define SOFTWARE_SPI - #define SDSS SDIO_D3_PIN - #define SD_SCK_PIN SDIO_CK_PIN - #define SD_MISO_PIN SDIO_D0_PIN - #define SD_MOSI_PIN SDIO_CMD_PIN + #define SDSS PC11 + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 #endif #ifndef SD_DETECT_PIN diff --git a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h index d8a83bef3a..061680aa79 100644 --- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h +++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h @@ -140,25 +140,17 @@ // // Onboard SD support // -#define SDIO_D0_PIN PC8 -#define SDIO_D1_PIN PC9 -#define SDIO_D2_PIN PC10 -#define SDIO_D3_PIN PC11 -#define SDIO_CK_PIN PC12 -#define SDIO_CMD_PIN PD2 - #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD #endif #if SD_CONNECTION_IS(ONBOARD) #define SDIO_SUPPORT // Use SDIO for onboard SD - - #ifndef SDIO_SUPPORT + #if DISABLED(SDIO_SUPPORT) #define SOFTWARE_SPI // Use soft SPI for onboard SD - #define SDSS SDIO_D3_PIN - #define SD_SCK_PIN SDIO_CK_PIN - #define SD_MISO_PIN SDIO_D0_PIN - #define SD_MOSI_PIN SDIO_CMD_PIN + #define SDSS PC11 + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h b/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h index d1f38f5c80..e63b534eff 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h @@ -338,13 +338,6 @@ #if SD_CONNECTION_IS(ONBOARD) #define SDIO_SUPPORT // Use SDIO for onboard SD - #define SDIO_D0_PIN PC8 - #define SDIO_D1_PIN PC9 - #define SDIO_D2_PIN PC10 - #define SDIO_D3_PIN PC11 - #define SDIO_CK_PIN PC12 - #define SDIO_CMD_PIN PD2 - //#define SDIO_CLOCK 48000000 #define SD_DETECT_PIN PC4 #elif SD_CONNECTION_IS(CUSTOM_CABLE) diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h index 196ca46319..6d23bc8b20 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h @@ -365,24 +365,14 @@ // Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2 // #if SD_CONNECTION_IS(LCD) - #define SDSS EXP2_07_PIN #define SD_SS_PIN SDSS #define SD_SCK_PIN EXP2_09_PIN #define SD_MISO_PIN EXP2_10_PIN #define SD_MOSI_PIN EXP2_05_PIN #define SD_DETECT_PIN EXP2_04_PIN - #elif SD_CONNECTION_IS(ONBOARD) - #define SDIO_SUPPORT // Use SDIO for onboard SD - #define SDIO_D0_PIN PC8 - #define SDIO_D1_PIN PC9 - #define SDIO_D2_PIN PC10 - #define SDIO_D3_PIN PC11 - #define SDIO_CK_PIN PC12 - #define SDIO_CMD_PIN PD2 - #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." #endif diff --git a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h index 7ccb57e238..98d2220878 100644 --- a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h +++ b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h @@ -48,13 +48,13 @@ // // Limit Switches // -#define X_MIN_PIN 39 // PD8 X_STOP -#define Y_MIN_PIN 40 // PD9 Y_STOP -#define Z_MIN_PIN 41 // PD10 Z_STOP +#define X_MIN_PIN PD8 // X_STOP +#define Y_MIN_PIN PD9 // Y_STOP +#define Z_MIN_PIN PD10 // Z_STOP -#define X_MAX_PIN 44 // PD0 W_STOP -#define Y_MAX_PIN 43 // PA8 V_STOP -#define Z_MAX_PIN 42 // PD11 U_STOP +#define X_MAX_PIN PD0 // W_STOP +#define Y_MAX_PIN PA8 // V_STOP +#define Z_MAX_PIN PD11 // U_STOP // // Z Probe (when not Z_MIN_PIN) @@ -66,64 +66,64 @@ // // Filament runout // -//#define FIL_RUNOUT_PIN 53 // PA3 BED_THE +//#define FIL_RUNOUT_PIN PA3 // BED_THE // // Steppers // -#define X_STEP_PIN 61 // PE14 X_PWM -#define X_DIR_PIN 62 // PE15 X_DIR -#define X_ENABLE_PIN 60 // PE13 X_RES -#define X_CS_PIN 16 // PA4 SPI_CS +#define X_STEP_PIN PE14 // X_PWM +#define X_DIR_PIN PE15 // X_DIR +#define X_ENABLE_PIN PE13 // X_RES +#define X_CS_PIN PA4 // SPI_CS -#define Y_STEP_PIN 64 // PB10 Y_PWM -#define Y_DIR_PIN 65 // PE9 Y_DIR -#define Y_ENABLE_PIN 63 // PE10 Y_RES -#define Y_CS_PIN 16 // PA4 SPI_CS +#define Y_STEP_PIN PB10 // Y_PWM +#define Y_DIR_PIN PE9 // Y_DIR +#define Y_ENABLE_PIN PE10 // Y_RES +#define Y_CS_PIN PA4 // SPI_CS -#define Z_STEP_PIN 67 // PC6 Z_PWM -#define Z_DIR_PIN 68 // PC0 Z_DIR -#define Z_ENABLE_PIN 66 // PC15 Z_RES -#define Z_CS_PIN 16 // PA4 SPI_CS +#define Z_STEP_PIN PC6 // Z_PWM +#define Z_DIR_PIN PC0 // Z_DIR +#define Z_ENABLE_PIN PC15 // Z_RES +#define Z_CS_PIN PA4 // SPI_CS -#define E0_STEP_PIN 71 // PD12 E1_PW -#define E0_DIR_PIN 70 // PC13 E1_DIR -#define E0_ENABLE_PIN 69 // PC14 E1_RE -#define E0_CS_PIN 16 // PA4 SPI_CS +#define E0_STEP_PIN PD12 // E1_PW +#define E0_DIR_PIN PC13 // E1_DIR +#define E0_ENABLE_PIN PC14 // E1_RE +#define E0_CS_PIN PA4 // SPI_CS -#define E1_STEP_PIN 73 // PE5 E2_PWM -#define E1_DIR_PIN 74 // PE6 E2_DIR -#define E1_ENABLE_PIN 72 // PE4 E2_RESE -#define E1_CS_PIN 16 // PA4 SPI_CS +#define E1_STEP_PIN PE5 // E2_PWM +#define E1_DIR_PIN PE6 // E2_DIR +#define E1_ENABLE_PIN PE4 // E2_RESE +#define E1_CS_PIN PA4 // SPI_CS -#define E2_STEP_PIN 77 // PB8 E3_PWM -#define E2_DIR_PIN 76 // PE2 E3_DIR -#define E2_ENABLE_PIN 75 // PE3 E3_RESE -#define E2_CS_PIN 16 // PA4 SPI_CS +#define E2_STEP_PIN PB8 // E3_PWM +#define E2_DIR_PIN PE2 // E3_DIR +#define E2_ENABLE_PIN PE3 // E3_RESE +#define E2_CS_PIN PA4 // SPI_CS // needed to pass a sanity check -#define X2_CS_PIN 16 // PA4 SPI_CS -#define Y2_CS_PIN 16 // PA4 SPI_CS -#define Z2_CS_PIN 16 // PA4 SPI_CS -#define Z3_CS_PIN 16 // PA4 SPI_CS -#define E3_CS_PIN 16 // PA4 SPI_CS -#define E4_CS_PIN 16 // PA4 SPI_CS -#define E5_CS_PIN 16 // PA4 SPI_CS +#define X2_CS_PIN PA4 // SPI_CS +#define Y2_CS_PIN PA4 // SPI_CS +#define Z2_CS_PIN PA4 // SPI_CS +#define Z3_CS_PIN PA4 // SPI_CS +#define E3_CS_PIN PA4 // SPI_CS +#define E4_CS_PIN PA4 // SPI_CS +#define E5_CS_PIN PA4 // SPI_CS #if HAS_L64XX - #define L6470_CHAIN_SCK_PIN 17 // PA5 - #define L6470_CHAIN_MISO_PIN 18 // PA6 - #define L6470_CHAIN_MOSI_PIN 19 // PA7 - #define L6470_CHAIN_SS_PIN 16 // PA4 + #define L6470_CHAIN_SCK_PIN PA5 + #define L6470_CHAIN_MISO_PIN PA6 + #define L6470_CHAIN_MOSI_PIN PA7 + #define L6470_CHAIN_SS_PIN PA4 //#define SD_SCK_PIN L6470_CHAIN_SCK_PIN //#define SD_MISO_PIN L6470_CHAIN_MISO_PIN //#define SD_MOSI_PIN L6470_CHAIN_MOSI_PIN #else - //#define SD_SCK_PIN 13 // PB13 SPI_S - //#define SD_MISO_PIN 12 // PB14 SPI_M - //#define SD_MOSI_PIN 11 // PB15 SPI_M + //#define SD_SCK_PIN PB13 // SPI_S + //#define SD_MISO_PIN PB14 // SPI_M + //#define SD_MOSI_PIN PB15 // SPI_M #endif /** @@ -144,114 +144,109 @@ // // Temperature Sensors // -#define TEMP_0_PIN 3 // Analog input 3, digital pin 54 PA0 E1_THERMISTOR -#define TEMP_1_PIN 4 // Analog input 4, digital pin 55 PA1 E2_THERMISTOR -#define TEMP_2_PIN 5 // Analog input 5, digital pin 56 PA2 E3_THERMISTOR -#define TEMP_BED_PIN 0 // Analog input 0, digital pin 51 PC2 BED_THERMISTOR_1 -#define TEMP_BED_1_PIN 1 // Analog input 1, digital pin 52 PC3 BED_THERMISTOR_2 -#define TEMP_BED_2_PIN 2 // Analog input 2, digital pin 53 PA3 BED_THERMISTOR_3 +#define TEMP_0_PIN PA0 // Analog input 3, digital pin 54 PA0 E1_THERMISTOR +#define TEMP_1_PIN PA1 // Analog input 4, digital pin 55 PA1 E2_THERMISTOR +#define TEMP_2_PIN PA2 // Analog input 5, digital pin 56 PA2 E3_THERMISTOR +#define TEMP_BED_PIN PC2 // Analog input 0, digital pin 51 PC2 BED_THERMISTOR_1 +#define TEMP_BED_1_PIN PC3 // Analog input 1, digital pin 52 PC3 BED_THERMISTOR_2 +#define TEMP_BED_2_PIN PA3 // Analog input 2, digital pin 53 PA3 BED_THERMISTOR_3 // // Heaters / Fans // -#define HEATER_0_PIN 48 // PC7 E1_HEAT_PWM -#define HEATER_1_PIN 49 // PB0 E2_HEAT_PWM -#define HEATER_2_PIN 50 // PB1 E3_HEAT_PWM -#define HEATER_BED_PIN 46 // PD14 (BED_HEAT_1 FET -#define HEATER_BED_1_PIN 45 // PD13 (BED_HEAT_2 FET -#define HEATER_BED_2_PIN 47 // PD15 (BED_HEAT_3 FET +#define HEATER_0_PIN PC7 // E1_HEAT_PWM +#define HEATER_1_PIN PB0 // E2_HEAT_PWM +#define HEATER_2_PIN PB1 // E3_HEAT_PWM +#define HEATER_BED_PIN PD14 // (BED_HEAT_1 FET +#define HEATER_BED_1_PIN PD13 // (BED_HEAT_2 FET +#define HEATER_BED_2_PIN PD15 // (BED_HEAT_3 FET -#define FAN_PIN 57 // PC4 E1_FAN PWM pin, Part cooling fan FET -#define FAN1_PIN 58 // PC5 E2_FAN PWM pin, Extruder fan FET -#define FAN2_PIN 59 // PE8 E3_FAN PWM pin, Controller fan FET +#define FAN_PIN PC4 // E1_FAN PWM pin, Part cooling fan FET +#define FAN1_PIN PC5 // E2_FAN PWM pin, Extruder fan FET +#define FAN2_PIN PE8 // E3_FAN PWM pin, Controller fan FET #ifndef E0_AUTO_FAN_PIN - #define E0_AUTO_FAN_PIN 58 // FAN1_PIN + #define E0_AUTO_FAN_PIN PC5 // FAN1_PIN #endif // // Misc functions // -#define LED_PIN -1 // 9 // PE1 green LED Heart beat -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define POWER_LOSS_PIN -1 // PWR_LOSS / nAC_FAULT +#define LED_PIN -1 // 9 // PE1 green LED Heart beat +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define POWER_LOSS_PIN -1 // PWR_LOSS / nAC_FAULT // // LCD / Controller // -//#define SD_DETECT_PIN 66 // PA15 SD_CA -//#define BEEPER_PIN 24 // PC9 SDIO_D1 -//#define LCD_PINS_RS 65 // PE9 Y_DIR -//#define LCD_PINS_ENABLE 59 // PE8 E3_FAN -//#define LCD_PINS_D4 10 // PB12 SPI_C -//#define LCD_PINS_D5 13 // PB13 SPI_S -//#define LCD_PINS_D6 12 // PB14 SPI_M -//#define LCD_PINS_D7 11 // PB15 SPI_M -//#define BTN_EN1 57 // PC4 E1_FAN -//#define BTN_EN2 58 // PC5 E2_FAN -//#define BTN_ENC 52 // PC3 BED_THE +//#define SD_DETECT_PIN PA15 // SD_CA +//#define BEEPER_PIN PC9 // SDIO_D1 +//#define LCD_PINS_RS PE9 // Y_DIR +//#define LCD_PINS_ENABLE PE8 // E3_FAN +//#define LCD_PINS_D4 PB12 // SPI_C +//#define LCD_PINS_D5 PB13 // SPI_S +//#define LCD_PINS_D6 PB14 // SPI_M +//#define LCD_PINS_D7 PB15 // SPI_M +//#define BTN_EN1 PC4 // E1_FAN +//#define BTN_EN2 PC5 // E2_FAN +//#define BTN_ENC PC3 // BED_THE // // Extension pins // -//#define EXT0_PIN 49 // PB0 E2_HEAT -//#define EXT1_PIN 50 // PB1 E3_HEAT -//#define EXT2_PIN // PB2 not used (tied to ground -//#define EXT3_PIN 39 // PD8 X_STOP -//#define EXT4_PIN 40 // PD9 Y_STOP -//#define EXT5_PIN 41 // PD10 Z_STOP -//#define EXT6_PIN 42 // PD11 -//#define EXT7_PIN 71 // PD12 E1_PW -//#define EXT8_PIN 64 // PB10 Y_PWM +//#define EXT0_PIN PB0 //E2_HEAT +//#define EXT1_PIN PB1 //E3_HEAT +//#define EXT2_PIN PB2 //not used (tied to ground +//#define EXT3_PIN PD8 //X_STOP +//#define EXT4_PIN PD9 //Y_STOP +//#define EXT5_PIN PD10 //Z_STOP +//#define EXT6_PIN PD11 +//#define EXT7_PIN PD12 //E1_PW +//#define EXT8_PIN PB10 //Y_PWM // WIFI -// 2 // PD3 CTS -// 3 // PD4 RTS -// 4 // PD5 TX -// 5 // PD6 RX -// 6 // PB5 WIFI_WAKEUP -// 7 // PE11 WIFI_RESET -// 8 // PE12 WIFI_BOOT +// PD3 CTS +// PD4 RTS +// PD5 TX +// PD6 RX +// PB5 WIFI_WAKEUP +// PE11 WIFI_RESET +// PE12 WIFI_BOOT // I2C USER -// 14 // PB7 SDA -// 15 // PB6 SCL +// PB7 SDA +// PB6 SCL // JTAG -// 20 // PA13 JTAG_TMS/SWDIO -// 21 // PA14 JTAG_TCK/SWCLK -// 22 // PB3 JTAG_TDO/SWO +// PA13 JTAG_TMS/SWDIO +// PA14 JTAG_TCK/SWCLK +// PB3 JTAG_TDO/SWO // // Onboard SD support // -#define SDIO_D0_PIN 23 // PC8 SDIO_D0 -#define SDIO_D1_PIN 24 // PC9 SDIO_D1 -//#define SD_CARD_DETECT_PIN 25 // PA15 SD_CARD_DETECT -#define SDIO_D2_PIN 26 // PC10 SDIO_D2 -#define SDIO_D3_PIN 27 // PC11 SDIO_D3 -#define SDIO_CK_PIN 28 // PC12 SDIO_CK -#define SDIO_CMD_PIN 29 // PD2 SDIO_CMD - #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD #endif #if SD_CONNECTION_IS(ONBOARD) - #define SDIO_SUPPORT // Use SDIO for onboard SD - #ifndef SDIO_SUPPORT + #define SDIO_SUPPORT // Use SDIO for onboard SD + #if DISABLED(SDIO_SUPPORT) #define SOFTWARE_SPI // Use soft SPI for onboard SD - #define SDSS SDIO_D3_PIN - #define SD_SCK_PIN SDIO_CK_PIN - #define SD_MISO_PIN SDIO_D0_PIN - #define SD_MOSI_PIN SDIO_CMD_PIN + #define SDSS PC11 + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 #endif + + //#define SD_CARD_DETECT_PIN PA15 // SD_CARD_DETECT + #endif #ifndef SDSS - #define SDSS 16 // PA4 SPI_CS + #define SDSS PA4 // SPI_CS #endif // OTG