0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

Include requirements in "Implemented Codes"

Browse source
This commit is contained in:
Scott Lahteine 2016-09-25 07:50:11 -05:00
parent 041d127cd3
commit 570676d265
1 changed files with 108 additions and 109 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

217
Marlin/Marlin_main.cpp
View file

@ -128,124 +128,123 @@
* M1 - Same as M0 * M1 - Same as M0
* M17 - Enable/Power all stepper motors * M17 - Enable/Power all stepper motors
* M18 - Disable all stepper motors; same as M84 * M18 - Disable all stepper motors; same as M84
* M20 - List SD card * M20 - List SD card. (Requires SDSUPPORT)
* M21 - Init SD card * M21 - Init SD card. (Requires SDSUPPORT)
* M22 - Release SD card * M22 - Release SD card. (Requires SDSUPPORT)
* M23 - Select SD file (M23 filename.g) * M23 - Select SD file: "M23 /path/file.gco". (Requires SDSUPPORT)
* M24 - Start/resume SD print * M24 - Start/resume SD print. (Requires SDSUPPORT)
* M25 - Pause SD print * M25 - Pause SD print. (Requires SDSUPPORT)
* M26 - Set SD position in bytes (M26 S12345) * M26 - Set SD position in bytes: "M26 S12345". (Requires SDSUPPORT)
* M27 - Report SD print status * M27 - Report SD print status. (Requires SDSUPPORT)
* M28 - Start SD write (M28 filename.g) * M28 - Start SD write: "M28 /path/file.gco". (Requires SDSUPPORT)
* M29 - Stop SD write * M29 - Stop SD write. (Requires SDSUPPORT)
* M30 - Delete file from SD (M30 filename.g) * M30 - Delete file from SD: "M30 /path/file.gco"
* M31 - Output time since last M109 or SD card start to serial * M31 - Report time since last M109 or SD card start to serial.
* M32 - Select file and start SD print (Can be used _while_ printing from SD card files): * M32 - Select file and start SD print: "M32 [S<bytepos>] !/path/file.gco#". (Requires SDSUPPORT)
* syntax "M32 /path/filename#", or "M32 S<startpos bytes> !filename#" * Use P to run other files as sub-programs: "M32 P !filename#"
* Call gcode file : "M32 P !filename#" and return to caller file after finishing (similar to #include).
* The '#' is necessary when calling from within sd files, as it stops buffer prereading * The '#' is necessary when calling from within sd files, as it stops buffer prereading
* M33 - Get the longname version of a path * M33 - Get the longname version of a path. (Requires LONG_FILENAME_HOST_SUPPORT)
* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. * M42 - Change pin status via gcode: M42 P<pin> S<value>. LED pin assumed if P is omitted.
* M48 - Measure Z_Probe repeatability. M48 [P # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel] * M48 - Measure Z Probe repeatability: M48 P<points> X<pos> Y<pos> V<level> E<engage> L<legs>. (Requires Z_MIN_PROBE_REPEATABILITY_TEST)
* M75 - Start the print job timer * M75 - Start the print job timer.
* M76 - Pause the print job timer * M76 - Pause the print job timer.
* M77 - Stop the print job timer * M77 - Stop the print job timer.
* M78 - Show statistical information about the print jobs * M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER)
* M80 - Turn on Power Supply * M80 - Turn on Power Supply. (Requires POWER_SUPPLY)
* M81 - Turn off Power Supply * M81 - Turn off Power Supply. (Requires POWER_SUPPLY)
* M82 - Set E codes absolute (default) * M82 - Set E codes absolute (default).
* M83 - Set E codes relative while in Absolute Coordinates (G90) mode * M83 - Set E codes relative while in Absolute (G90) mode.
* M84 - Disable steppers until next move, * M84 - Disable steppers until next move, or use S<seconds> to specify an idle
* or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout. * duration after which steppers should turn off. S0 disables the timeout.
* M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default) * M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
* M92 - Set planner.axis_steps_per_mm - same syntax as G92 * M92 - Set planner.axis_steps_per_mm for one or more axes.
* M104 - Set extruder target temp * M104 - Set extruder target temp.
* M105 - Read current temp * M105 - Report current temperatures.
* M106 - Fan on * M106 - Fan on.
* M107 - Fan off * M107 - Fan off.
* M108 - Stop the waiting for heaters in M109, M190, M303. Does not affect the target temperature. * M108 - Break out of heating loops (M109, M190, M303). With no controller, breaks out of M0/M1. (Requires EMERGENCY_PARSER)
* M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating * M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
* Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling * Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
* IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F * IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
* M110 - Set the current line number * M110 - Set the current line number. (Used by host printing)
* M111 - Set debug flags with S<mask>. See flag bits defined in enum.h. * M111 - Set debug flags: "M111 S<flagbits>". See flag bits defined in enum.h.
* M112 - Emergency stop * M112 - Emergency stop.
* M113 - Get or set the timeout interval for Host Keepalive "busy" messages * M113 - Get or set the timeout interval for Host Keepalive "busy" messages. (Requires HOST_KEEPALIVE_FEATURE)
* M114 - Output current position to serial port * M114 - Report current position.
* M115 - Capabilities string * M115 - Report capabilities.
* M117 - Display a message on the controller screen * M117 - Display a message on the controller screen. (Requires an LCD)
* M119 - Output Endstop status to serial port * M119 - Report endstops status.
* M120 - Enable endstop detection * M120 - Enable endstops detection.
* M121 - Disable endstop detection * M121 - Disable endstops detection.
* M126 - Solenoid Air Valve Open (BariCUDA support by jmil) * M126 - Solenoid Air Valve Open. (Requires BARICUDA)
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil) * M127 - Solenoid Air Valve Closed. (Requires BARICUDA)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M128 - EtoP Open. (Requires BARICUDA)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M129 - EtoP Closed. (Requires BARICUDA)
* M140 - Set bed target temp * M140 - Set bed target temp. S<temp>
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS) * M145 - Set heatup values for materials on the LCD. H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M149 - Set temperature units * M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work. * M150 - Set BlinkM Color R<red> U<green> B<blue>. Values 0-255. (Requires BLINKM)
* M163 - Set a single proportion for a mixing extruder. Requires MIXING_EXTRUDER. * M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER)
* M164 - Save the mix as a virtual extruder. Requires MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS. * M164 - Save the mix as a virtual extruder. (Requires MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS)
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires MIXING_EXTRUDER. * M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. (Requires MIXING_EXTRUDER)
* M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating * M190 - Sxxx Wait for bed current temp to reach target temp. ** Waits only when heating! **
* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling * Rxxx Wait for bed current temp to reach target temp. ** Waits for heating or cooling. **
* M200 - Set filament diameter, D<diameter>, setting E axis units to cubic. (Use S0 to revert to linear units.) * M200 - Set filament diameter, D<diameter>, setting E axis units to cubic. (Use S0 to revert to linear units.)
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) * M201 - Set max acceleration in units/s^2 for print moves: "M201 X<accel> Y<accel> Z<accel> E<accel>"
* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! * M202 - Set max acceleration in units/s^2 for travel moves: "M202 X<accel> Y<accel> Z<accel> E<accel>" ** UNUSED IN MARLIN! **
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec * M203 - Set maximum feedrate: "M203 X<fr> Y<fr> Z<fr> E<fr>" in units/sec.
* M204 - Set default acceleration: P for Printing moves, R for Retract only (no X, Y, Z) moves and T for Travel (non printing) moves (ex. M204 P800 T3000 R9000) in units/sec^2 * M204 - Set default acceleration in units/sec^2: P<printing> R<extruder_only> T<travel>
* M205 - Set advanced settings. Current units apply: * M205 - Set advanced settings. Current units apply:
S<print> T<travel> minimum speeds S<print> T<travel> minimum speeds
B<minimum segment time> B<minimum segment time>
X<max xy jerk>, Z<max Z jerk>, E<max E jerk> X<max xy jerk>, Z<max Z jerk>, E<max E jerk>
* M206 - Set additional homing offset * M206 - Set additional homing offset.
* M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance> * M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>. (Requires FWRETRACT)
* M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min> * M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>. (Requires FWRETRACT)
* M209 - Turn Automatic Retract Detection on/off: S<bool> (For slicers that don't support G10/11). * M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT)
Every normal extrude-only move will be classified as retract depending on the direction. Every normal extrude-only move will be classified as retract depending on the direction.
* M211 - Enable, Disable, and/or Report software endstops: [S<bool>] * M211 - Enable, Disable, and/or Report software endstops: S<0|1>
* M218 - Set a tool offset: T<index> X<offset> Y<offset> * M218 - Set a tool offset: "M218 T<index> X<offset> Y<offset>". (Requires 2 or more extruders)
* M220 - Set Feedrate Percentage: S<percent> ("FR" on your LCD) * M220 - Set Feedrate Percentage: "M220 S<percent>" (i.e., "FR" on the LCD)
* M221 - Set Flow Percentage: S<percent> * M221 - Set Flow Percentage: "M221 S<percent>"
* M226 - Wait until the specified pin reaches the state required: P<pin number> S<pin state> * M226 - Wait until a pin is in a given state: "M226 P<pin> S<state>"
* M240 - Trigger a camera to take a photograph * M240 - Trigger a camera to take a photograph. (Requires CHDK or PHOTOGRAPH_PIN)
* M250 - Set LCD contrast C<contrast value> (value 0..63) * M250 - Set LCD contrast: "M250 C<contrast>" (0-63). (Requires LCD support)
* M280 - Set servo position absolute. P: servo index, S: angle or microseconds * M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos)
* M300 - Play beep sound S<frequency Hz> P<duration ms> * M300 - Play beep sound S<frequency Hz> P<duration ms>
* M301 - Set PID parameters P I and D * M301 - Set PID parameters P I and D. (Requires PIDTEMP)
* M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. * M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. (Requires PREVENT_COLD_EXTRUSION)
* M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C) * M303 - PID relay autotune S<temperature> sets the target temperature. Default 150C. (Requires PIDTEMP)
* M304 - Set bed PID parameters P I and D * M304 - Set bed PID parameters P I and D. (Requires PIDTEMPBED)
* M380 - Activate solenoid on active extruder * M380 - Activate solenoid on active extruder. (Requires EXT_SOLENOID)
* M381 - Disable all solenoids * M381 - Disable all solenoids. (Requires EXT_SOLENOID)
* M400 - Finish all moves * M400 - Finish all moves.
* M401 - Lower Z probe if present * M401 - Lower Z probe. (Requires a probe)
* M402 - Raise Z probe if present * M402 - Raise Z probe. (Requires a probe)
* M404 - Display or set the Nominal Filament Width: [ N<diameter> ] * M404 - Display or set the Nominal Filament Width: "W<diameter>". (Requires FILAMENT_WIDTH_SENSOR)
* M405 - Enable Filament Sensor extrusion control. Optional delay between sensor and extruder: D<cm> * M405 - Enable Filament Sensor flow control. "M405 D<delay_cm>". (Requires FILAMENT_WIDTH_SENSOR)
* M406 - Disable Filament Sensor extrusion control * M406 - Disable Filament Sensor flow control. (Requires FILAMENT_WIDTH_SENSOR)
* M407 - Display measured filament diameter in millimeters * M407 - Display measured filament diameter in millimeters. (Requires FILAMENT_WIDTH_SENSOR)
* M410 - Quickstop. Abort all the planned moves * M410 - Quickstop. Abort all planned moves.
* M420 - Enable/Disable Mesh Leveling (with current values) S1=enable S0=disable * M420 - Enable/Disable Mesh Leveling (with current values) S1=enable S0=disable (Requires MESH_BED_LEVELING)
* M421 - Set a single Z coordinate in the Mesh Leveling grid. X<units> Y<units> Z<units> * M421 - Set a single Z coordinate in the Mesh Leveling grid. X<units> Y<units> Z<units> (Requires MESH_BED_LEVELING)
* M428 - Set the home_offset logically based on the current_position * M428 - Set the home_offset based on the current_position. Nearest edge applies.
* M500 - Store parameters in EEPROM * M500 - Store parameters in EEPROM. (Requires EEPROM_SETTINGS)
* M501 - Read parameters from EEPROM (if you need reset them after you changed them temporarily). * M501 - Restore parameters from EEPROM. (Requires EEPROM_SETTINGS)
* M502 - Revert to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. * M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! **
* M503 - Print the current settings (from memory not from EEPROM). Use S0 to leave off headings. * M503 - Print the current settings (in memory): "M503 S<verbose>". S0 specifies compact output.
* M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) * M540 - Enable/disable SD card abort on endstop hit: "M540 S<state>". (Requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] * M600 - Pause for filament change: "M600 X<pos> Y<pos> Z<raise> E<first_retract> L<later_retract>". (Requires FILAMENT_CHANGE_FEATURE)
* M665 - Set delta configurations: L<diagonal rod> R<delta radius> S<segments/s> * M665 - Set delta configurations: "M665 L<diagonal rod> R<delta radius> S<segments/s>" (Requires DELTA)
* M666 - Set delta endstop adjustment * M666 - Set delta endstop adjustment. (Requires DELTA)
* M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ] * M605 - Set dual x-carriage movement mode: "M605 S<mode> [X<x_offset>] [R<temp_offset>]". (Requires DUAL_X_CARRIAGE)
* M851 - Set Z probe's Z offset in current units. (Negative values apply to probes that extend below the nozzle.) * M851 - Set Z probe's Z offset in current units. (Negative = below the nozzle.)
* M907 - Set digital trimpot motor current using axis codes. * M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots)
* M908 - Control digital trimpot directly. * M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN)
* M909 - DAC_STEPPER_CURRENT: Print digipot/DAC current value * M909 - Print digipot/DAC current value. (Requires DAC_STEPPER_CURRENT)
* M910 - DAC_STEPPER_CURRENT: Commit digipot/DAC value to external EEPROM via I2C * M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires DAC_STEPPER_CURRENT)
* M350 - Set microstepping mode. * M350 - Set microstepping mode. (Requires digital microstepping pins.)
* M351 - Toggle MS1 MS2 pins directly. * M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.)
* *
* ************ SCARA Specific - This can change to suit future G-code regulations * ************ SCARA Specific - This can change to suit future G-code regulations
* M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration) * M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration)
@ -256,13 +255,13 @@
* ************* SCARA End *************** * ************* SCARA End ***************
* *
* ************ Custom codes - This can change to suit future G-code regulations * ************ Custom codes - This can change to suit future G-code regulations
* M100 - Watch Free Memory (For Debugging Only) * M100 - Watch Free Memory (For Debugging). (Requires M100_FREE_MEMORY_WATCHER)
* M928 - Start SD logging (M928 filename.g) - ended by M29 * M928 - Start SD logging: "M928 filename.gco". Stop with M29. (Requires SDSUPPORT)
* M999 - Restart after being stopped by error * M999 - Restart after being stopped by error
* *
* "T" Codes * "T" Codes
* *
* T0-T3 - Select a tool by index (usually an extruder) [ F<units/min> ] * T0-T3 - Select an extruder (tool) by index: "T<n> F<units/min>"
* *
*/ */