Merge pull request #1516 from thinkyhead/fixup_ramps
Cleanup ramps boards
This commit is contained in:
Scott Lahteine
commit
5b9e341222
|
|
@ -51,11 +51,10 @@
|
|||
#define BOARD_WITBOX 41 // bq WITBOX
|
||||
#define BOARD_HEPHESTOS 42 // bq Prusa i3 Hephestos
|
||||
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
|
||||
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers and Arduino Mega
|
||||
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||
|
||||
#define BOARD_99 99 // This is in pins.h but...?
|
||||
|
||||
#define MB(board) (MOTHERBOARD==BOARD_##board)
|
||||
#define IS_RAMPS (MB(RAMPS_OLD) || MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(BAM_DICE) )
|
||||
|
||||
#endif //__BOARDS_H
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@
|
|||
#include "pins_SETHI.h"
|
||||
#elif MB(RAMPS_OLD)
|
||||
#include "pins_RAMPS_OLD.h"
|
||||
#elif IS_RAMPS
|
||||
#elif MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF)
|
||||
#include "pins_RAMPS_13.h"
|
||||
#elif MB(DUEMILANOVE_328P)
|
||||
#include "pins_DUEMILANOVE_328P.h"
|
||||
|
|
@ -110,6 +110,8 @@
|
|||
#include "pins_WITBOX.h"
|
||||
#elif MB(HEPHESTOS)
|
||||
#include "pins_HEPHESTOS.h"
|
||||
#elif MB(BAM_DICE)
|
||||
#include "pins_RAMPS_13.h"
|
||||
#elif MB(BAM_DICE_DUE)
|
||||
#include "pins_BAM_DICE_DUE.h"
|
||||
#elif MB(99)
|
||||
|
|
|
|||
|
|
@ -3,3 +3,11 @@
|
|||
*/
|
||||
|
||||
#include "pins_RAMPS_13.h"
|
||||
|
||||
#define FAN_PIN 9 // (Sprinter config)
|
||||
#define HEATER_1_PIN -1
|
||||
|
||||
#ifdef TEMP_STAT_LEDS
|
||||
#define STAT_LED_RED 6
|
||||
#define STAT_LED_BLUE 11
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -4,6 +4,9 @@
|
|||
|
||||
#include "pins_RAMPS_13.h"
|
||||
|
||||
#define FAN_PIN 9 // (Sprinter config)
|
||||
#define BEEPER 33
|
||||
|
||||
#define E2_STEP_PIN 23
|
||||
#define E2_DIR_PIN 25
|
||||
#define E2_ENABLE_PIN 40
|
||||
|
|
@ -16,6 +19,7 @@
|
|||
#define E4_DIR_PIN 37
|
||||
#define E4_ENABLE_PIN 42
|
||||
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN 16
|
||||
#define HEATER_3_PIN 17
|
||||
#define HEATER_4_PIN 4
|
||||
|
|
|
|||
|
|
@ -1,183 +1,11 @@
|
|||
/**
|
||||
* Arduino Mega with BAM&DICE DUE pin assignments
|
||||
*
|
||||
* Applies to the following boards:
|
||||
*
|
||||
* BAM&DICE Due with Arduino Mega
|
||||
* BAM&DICE Due (Arduino Mega) pin assignments
|
||||
*/
|
||||
|
||||
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
|
||||
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
||||
#endif
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 54
|
||||
#define X_DIR_PIN 55
|
||||
#define X_ENABLE_PIN 38
|
||||
#define X_MIN_PIN 3
|
||||
#define X_MAX_PIN 2
|
||||
|
||||
#define Y_STEP_PIN 60
|
||||
#define Y_DIR_PIN 61
|
||||
#define Y_ENABLE_PIN 56
|
||||
#define Y_MIN_PIN 14
|
||||
#define Y_MAX_PIN 15
|
||||
|
||||
#define Z_STEP_PIN 46
|
||||
#define Z_DIR_PIN 48
|
||||
#define Z_ENABLE_PIN 62
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN 19
|
||||
|
||||
#define Y2_STEP_PIN 36
|
||||
#define Y2_DIR_PIN 34
|
||||
#define Y2_ENABLE_PIN 30
|
||||
|
||||
#define Z2_STEP_PIN 36
|
||||
#define Z2_DIR_PIN 34
|
||||
#define Z2_ENABLE_PIN 30
|
||||
|
||||
#define E0_STEP_PIN 26
|
||||
#define E0_DIR_PIN 28
|
||||
#define E0_ENABLE_PIN 24
|
||||
|
||||
#define E1_STEP_PIN 36
|
||||
#define E1_DIR_PIN 34
|
||||
#define E1_ENABLE_PIN 30
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
#include "pins_RAMPS_13.h"
|
||||
|
||||
#define FAN_PIN 9 // (Sprinter config)
|
||||
|
||||
#define PS_ON_PIN 12
|
||||
|
||||
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
|
||||
#define KILL_PIN 41
|
||||
#else
|
||||
#define KILL_PIN -1
|
||||
#endif
|
||||
|
||||
#define HEATER_0_PIN 10
|
||||
|
||||
#define HEATER_1_PIN -1
|
||||
|
||||
#define HEATER_2_PIN -1
|
||||
|
||||
#define TEMP_0_PIN 9 // ANALOG NUMBERING
|
||||
#define TEMP_1_PIN 11 // ANALOG NUMBERING
|
||||
#define TEMP_2_PIN -1 // ANALOG NUMBERING
|
||||
|
||||
#define HEATER_BED_PIN 8 // BED
|
||||
|
||||
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
|
||||
|
||||
#ifdef NUM_SERVOS
|
||||
#define SERVO0_PIN 11
|
||||
|
||||
#if NUM_SERVOS > 1
|
||||
#define SERVO1_PIN 6
|
||||
#endif
|
||||
|
||||
#if NUM_SERVOS > 2
|
||||
#define SERVO2_PIN 5
|
||||
#endif
|
||||
|
||||
#if NUM_SERVOS > 3
|
||||
#define SERVO3_PIN 4
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef ULTRA_LCD
|
||||
|
||||
#ifdef NEWPANEL
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 23
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D6 27
|
||||
#define LCD_PINS_D7 29
|
||||
|
||||
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
#define BEEPER 37
|
||||
|
||||
#define BTN_EN1 31
|
||||
#define BTN_EN2 33
|
||||
#define BTN_ENC 35
|
||||
|
||||
#define SDCARDDETECT 49
|
||||
#elif defined(LCD_I2C_PANELOLU2)
|
||||
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
|
||||
#define BTN_EN2 43
|
||||
#define BTN_ENC 32
|
||||
#define LCD_SDSS 53
|
||||
#define SDCARDDETECT -1
|
||||
#define KILL_PIN 41
|
||||
#elif defined(LCD_I2C_VIKI)
|
||||
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
|
||||
#define BTN_EN2 7
|
||||
#define BTN_ENC -1
|
||||
#define LCD_SDSS 53
|
||||
#define SDCARDDETECT 49
|
||||
#else
|
||||
// arduino pin which triggers an piezzo beeper
|
||||
#define BEEPER 33 // Beeper on AUX-4
|
||||
|
||||
// buttons are directly attached using AUX-2
|
||||
#ifdef REPRAPWORLD_KEYPAD
|
||||
#define BTN_EN1 64 // encoder
|
||||
#define BTN_EN2 59 // encoder
|
||||
#define BTN_ENC 63 // enter button
|
||||
#define SHIFT_OUT 40 // shift register
|
||||
#define SHIFT_CLK 44 // shift register
|
||||
#define SHIFT_LD 42 // shift register
|
||||
#else
|
||||
#define BTN_EN1 37
|
||||
#define BTN_EN2 35
|
||||
#define BTN_ENC 31 // the click
|
||||
#endif
|
||||
|
||||
#ifdef G3D_PANEL
|
||||
#define SDCARDDETECT 49
|
||||
#else
|
||||
#define SDCARDDETECT -1 // Ramps does not use this port
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#else // Old-style panel with shift register
|
||||
// Arduino pin witch triggers an piezzo beeper
|
||||
#define BEEPER 33 // No Beeper added
|
||||
|
||||
// Buttons are attached to a shift register
|
||||
// Not wired yet
|
||||
// #define SHIFT_CLK 38
|
||||
// #define SHIFT_LD 42
|
||||
// #define SHIFT_OUT 40
|
||||
// #define SHIFT_EN 17
|
||||
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 23
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D6 27
|
||||
#define LCD_PINS_D7 29
|
||||
#endif
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
// SPI for Max6675 Thermocouple
|
||||
#ifndef SDSUPPORT
|
||||
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
|
||||
#else
|
||||
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
|
||||
#endif
|
||||
|
||||
#ifndef SDSUPPORT
|
||||
// these pins are defined in the SD library if building with SD support
|
||||
#define SCK_PIN 52
|
||||
#define MISO_PIN 50
|
||||
#define MOSI_PIN 51
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -3,3 +3,6 @@
|
|||
*/
|
||||
|
||||
#include "pins_RAMPS_13.h"
|
||||
|
||||
#define FAN_PIN 9 // (Sprinter config)
|
||||
#define HEATER_1_PIN -1
|
||||
|
|
|
|||
|
|
@ -7,10 +7,8 @@
|
|||
* RAMPS_13_EEB (Extruder, Extruder, Bed)
|
||||
* RAMPS_13_EFF (Extruder, Fan, Fan)
|
||||
* RAMPS_13_EEF (Extruder, Extruder, Fan)
|
||||
* 3DRAG
|
||||
* K8200
|
||||
* AZTEEG_X3
|
||||
* AZTEEG_X3_PRO
|
||||
*
|
||||
* Other pins_MYBOARD.h files may override these defaults
|
||||
*/
|
||||
|
||||
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
|
||||
|
|
@ -63,7 +61,7 @@
|
|||
#define FILWIDTH_PIN 5
|
||||
#endif
|
||||
|
||||
#if MB(RAMPS_13_EFB) || MB(RAMPS_13_EFF) || MB(AZTEEG_X3) || MB(AZTEEG_X3_PRO) || MB(WITBOX) || MB(HEPHESTOS)
|
||||
#if MB(RAMPS_13_EFB) || MB(RAMPS_13_EFF)
|
||||
#define FAN_PIN 9 // (Sprinter config)
|
||||
#if MB(RAMPS_13_EFF)
|
||||
#define CONTROLLERFAN_PIN -1 // Pin used for the fan to cool controller
|
||||
|
|
@ -88,7 +86,7 @@
|
|||
#define HEATER_0_PIN 10 // EXTRUDER 1
|
||||
#endif
|
||||
|
||||
#if MB(RAMPS_13_EFB) || MB(AZTEEG_X3) || MB(WITBOX) || MB(HEPHESTOS)
|
||||
#if MB(RAMPS_13_EFB)
|
||||
#define HEATER_1_PIN -1
|
||||
#else
|
||||
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
|
||||
|
|
@ -110,28 +108,14 @@
|
|||
|
||||
#ifdef NUM_SERVOS
|
||||
#define SERVO0_PIN 11
|
||||
|
||||
#if NUM_SERVOS > 1
|
||||
#define SERVO1_PIN 6
|
||||
#endif
|
||||
|
||||
#if NUM_SERVOS > 2
|
||||
#define SERVO2_PIN 5
|
||||
#endif
|
||||
|
||||
#if NUM_SERVOS > 3
|
||||
#define SERVO3_PIN 4
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if MB(AZTEEG_X3_PRO)
|
||||
#define BEEPER 33
|
||||
#endif
|
||||
|
||||
#ifdef TEMP_STAT_LEDS
|
||||
#if MB(AZTEEG_X3)
|
||||
#define STAT_LED_RED 6
|
||||
#define STAT_LED_BLUE 11
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -3,3 +3,6 @@
|
|||
*/
|
||||
|
||||
#include "pins_RAMPS_13.h"
|
||||
|
||||
#define FAN_PIN 9 // (Sprinter config)
|
||||
#define HEATER_1_PIN -1
|
||||
|
|
|
|||
Loading…
Reference in a new issue