BLTouch v3 / 3DTouch Interoperability & performance (#13814)
This commit is contained in:
InsanityAutomation
Scott Lahteine
parent
40aff7e1f2
commit
6811e2921b
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -35,15 +35,32 @@ void stop();
|
|||
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
#include "../core/debug_out.h"
|
||||
|
||||
void BLTouch::command(const BLTCommand cmd) {
|
||||
//SERIAL_ECHOLNPAIR("BLTouch Command :", cmd);
|
||||
bool BLTouch::command(const BLTCommand cmd, const millis_t &ms) {
|
||||
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("BLTouch Command :", cmd);
|
||||
MOVE_SERVO(Z_PROBE_SERVO_NR, cmd);
|
||||
safe_delay(BLTOUCH_DELAY);
|
||||
safe_delay(MAX(ms, BLTOUCH_DELAY)); // BLTOUCH_DELAY is also the *minimum* delay
|
||||
return triggered();
|
||||
}
|
||||
|
||||
void BLTouch::init() {
|
||||
reset(); // Clear all BLTouch error conditions
|
||||
stow();
|
||||
// This is called by marlin.cpp on initialization
|
||||
// SET_5V_MODE (if enabled). OD_MODE is the default on power on.
|
||||
// This mode will stay active until manual SET_OD_MODE or power cycle
|
||||
#if ENABLED(BLTOUCH_FORCE_5V_MODE)
|
||||
_set_5V_mode(); // Set 5V mode if explicitely demanded (V3 upwards)
|
||||
#endif
|
||||
clear();
|
||||
// There really should be no alarm outstanding now, and no triggered condition. But if there is,
|
||||
// there is no need to worry people here on init right at the start of the printer.
|
||||
}
|
||||
|
||||
void BLTouch::clear() {
|
||||
_reset(); // RESET or RESET_SW will clear an alarm condition but...
|
||||
// ...it will not clear a triggered condition in SW mode when the pin is currently up
|
||||
// ANTClabs <-- CODE ERROR
|
||||
_stow(); // STOW will pull up the pin and clear any triggered condition unless it fails, don't care
|
||||
_deploy(); // DEPLOY to test the probe. Could fail, don't care
|
||||
_stow(); // STOW to be ready for meaningful work. Could fail, don't care
|
||||
}
|
||||
|
||||
bool BLTouch::triggered() {
|
||||
|
|
@ -56,41 +73,92 @@ bool BLTouch::triggered() {
|
|||
);
|
||||
}
|
||||
|
||||
bool BLTouch::set_deployed(const bool in_deploy) {
|
||||
if (in_deploy && triggered()) { // If BLTouch says it's triggered
|
||||
reset(); // try to reset it.
|
||||
_deploy(); _stow(); // Deploy and stow to clear the "triggered" condition.
|
||||
safe_delay(1500); // Wait for internal self-test to complete.
|
||||
// (Measured completion time was 0.65 seconds
|
||||
// after reset, deploy, and stow sequence)
|
||||
if (triggered()) { // If it still claims to be triggered...
|
||||
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH);
|
||||
stop(); // punt!
|
||||
return true;
|
||||
bool BLTouch::deploy_proc() {
|
||||
// Do a DEPLOY
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch DEPLOY requested");
|
||||
|
||||
// Attempt to DEPLOY, wait for DEPLOY_DELAY or ALARM
|
||||
if (_deploy_query_alarm()) {
|
||||
// The deploy might have failed or the probe is already triggered (nozzle too low?)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after DEPLOY, recovering");
|
||||
|
||||
clear(); // Get the probe into start condition
|
||||
|
||||
// Last attempt to DEPLOY
|
||||
if (_deploy_query_alarm()) {
|
||||
// The deploy might have failed or the probe is actually triggered (nozzle too low?) again
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed");
|
||||
|
||||
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); // Tell the user something is wrong, needs action
|
||||
stop(); // but it's not too bad, no need to kill, allow restart
|
||||
|
||||
return true; // Tell our caller we goofed in case he cares to know
|
||||
}
|
||||
}
|
||||
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
#if EITHER(BLTOUCH_FORCE_5V_MODE, ENDSTOPPULLUPS) \
|
||||
|| ALL(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, ENDSTOPPULLUP_ZMIN) \
|
||||
|| (USES_Z_MIN_PROBE_ENDSTOP && ENABLED(ENDSTOPPULLUP_ZMIN_PROBE))
|
||||
set_5V_mode(); // Assume 5V DC logic level if endstop pullup resistors are enabled
|
||||
#elif true || ENABLED(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
|
||||
set_OD_mode();
|
||||
#endif
|
||||
#endif
|
||||
// Now the probe is ready to issue a 10ms pulse when the pin goes up.
|
||||
// The trigger STOW (see motion.cpp for example) will pull up the probes pin as soon as the pulse
|
||||
// is registered.
|
||||
|
||||
if (in_deploy) {
|
||||
_deploy();
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
set_SW_mode();
|
||||
#endif
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.deploy_proc() end");
|
||||
|
||||
return false; // report success to caller
|
||||
}
|
||||
|
||||
bool BLTouch::stow_proc() {
|
||||
// Do a STOW
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STOW requested");
|
||||
|
||||
// A STOW will clear a triggered condition in the probe (10ms pulse).
|
||||
// At the moment that we come in here, we might (pulse) or will (SW mode) see the trigger on the pin.
|
||||
// So even though we know a STOW will be ignored if an ALARM condition is active, we will STOW.
|
||||
// Note: If the probe is deployed AND in an ALARM condition, this STOW will not pull up the pin
|
||||
// and the ALARM condition will still be there. --> ANTClabs should change this behaviour maybe
|
||||
|
||||
// Attempt to STOW, wait for STOW_DELAY or ALARM
|
||||
if (_stow_query_alarm()) {
|
||||
// The stow might have failed
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after STOW, recovering");
|
||||
|
||||
_reset(); // This RESET will then also pull up the pin. If it doesn't
|
||||
// work and the pin is still down, there will no longer be
|
||||
// an ALARM condition though.
|
||||
// But one more STOW will catch that
|
||||
// Last attempt to STOW
|
||||
if (_stow_query_alarm()) { // so if there is now STILL an ALARM condition:
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed");
|
||||
|
||||
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); // Tell the user something is wrong, needs action
|
||||
stop(); // but it's not too bad, no need to kill, allow restart
|
||||
|
||||
return true; // Tell our caller we goofed in case he cares to know
|
||||
}
|
||||
}
|
||||
else _stow();
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("bltouch.set_deployed(", in_deploy, ")");
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.stow_proc() end");
|
||||
|
||||
return false;
|
||||
return false; // report success to caller
|
||||
}
|
||||
|
||||
bool BLTouch::status_proc() {
|
||||
/**
|
||||
* Return a TRUE for "YES, it is DEPLOYED"
|
||||
* This function will ensure switch state is reset after execution
|
||||
* This may change pin position in some scenarios, specifically
|
||||
* if the pin has been triggered but not yet stowed.
|
||||
*/
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STATUS requested");
|
||||
|
||||
_set_SW_mode();
|
||||
const bool tr = triggered(); // If triggered in SW mode, the pin is up, it is STOWED
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("BLTouch is ", (int)tr);
|
||||
|
||||
_reset(); // turn off the SW Mode
|
||||
if (tr) _stow(); else _deploy(); // and reset any triggered signal, restore state
|
||||
return !tr;
|
||||
}
|
||||
|
||||
#endif // BLTOUCH
|
||||
|
|
|
|||
|
|
@ -26,37 +26,75 @@
|
|||
// BLTouch commands are sent as servo angles
|
||||
typedef unsigned char BLTCommand;
|
||||
|
||||
#define BLTOUCH_DEPLOY 10
|
||||
#define BLTOUCH_SW_MODE 60
|
||||
#define BLTOUCH_STOW 90
|
||||
#define BLTOUCH_SELFTEST 120
|
||||
#define BLTOUCH_5V_MODE 140
|
||||
#define BLTOUCH_OD_MODE 150
|
||||
#define BLTOUCH_RESET 160
|
||||
#define BLTOUCH_DEPLOY 10
|
||||
#define BLTOUCH_SW_MODE 60
|
||||
#define BLTOUCH_STOW 90
|
||||
#define BLTOUCH_SELFTEST 120
|
||||
#define BLTOUCH_5V_MODE 140
|
||||
#define BLTOUCH_OD_MODE 150
|
||||
#define BLTOUCH_RESET 160
|
||||
|
||||
/**
|
||||
* The following commands may require different delays.
|
||||
*
|
||||
* ANTClabs recommends 2000ms for 5V/OD commands. However it is
|
||||
* not common for other commands to immediately follow these,
|
||||
* and testing has shown that these complete in 500ms reliably.
|
||||
*
|
||||
* AntClabs recommends 750ms for Deploy/Stow, otherwise you will
|
||||
* not catch an alarm state until the following move command.
|
||||
*/
|
||||
|
||||
#ifndef BLTOUCH_SET5V_DELAY
|
||||
#define BLTOUCH_SET5V_DELAY BLTOUCH_DELAY
|
||||
#endif
|
||||
#ifndef BLTOUCH_SETOD_DELAY
|
||||
#define BLTOUCH_SETOD_DELAY BLTOUCH_DELAY
|
||||
#endif
|
||||
#ifndef BLTOUCH_DEPLOY_DELAY
|
||||
#define BLTOUCH_DEPLOY_DELAY 750
|
||||
#endif
|
||||
#ifndef BLTOUCH_STOW_DELAY
|
||||
#define BLTOUCH_STOW_DELAY 750
|
||||
#endif
|
||||
#ifndef BLTOUCH_RESET_DELAY
|
||||
#define BLTOUCH_RESET_DELAY BLTOUCH_DELAY
|
||||
#endif
|
||||
|
||||
class BLTouch {
|
||||
public:
|
||||
static void init();
|
||||
static void command(const BLTCommand cmd);
|
||||
static bool triggered();
|
||||
static bool triggered(); // used by menu_advanced.cpp
|
||||
static void init(); // used by main.cpp
|
||||
|
||||
FORCE_INLINE static void reset() { command(BLTOUCH_RESET); }
|
||||
FORCE_INLINE static void selftest() { command(BLTOUCH_SELFTEST); }
|
||||
// DEPLOY and STOW are wrapped for error handling - these are used by homing and by probing
|
||||
FORCE_INLINE static bool deploy() { return deploy_proc(); }
|
||||
FORCE_INLINE static bool stow() { return stow_proc(); }
|
||||
FORCE_INLINE static bool status() { return status_proc(); }
|
||||
|
||||
FORCE_INLINE static void set_5V_mode() { command(BLTOUCH_5V_MODE); }
|
||||
FORCE_INLINE static void set_OD_mode() { command(BLTOUCH_OD_MODE); }
|
||||
FORCE_INLINE static void set_SW_mode() { command(BLTOUCH_SW_MODE); }
|
||||
// Native BLTouch commands ("Underscore"...), used in lcd menus and internally
|
||||
FORCE_INLINE static void _reset() { command(BLTOUCH_RESET, BLTOUCH_RESET_DELAY); }
|
||||
|
||||
FORCE_INLINE static bool deploy() { return set_deployed(true); }
|
||||
FORCE_INLINE static bool stow() { return set_deployed(false); }
|
||||
FORCE_INLINE static void _selftest() { command(BLTOUCH_SELFTEST, BLTOUCH_DELAY); }
|
||||
|
||||
FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY); }
|
||||
FORCE_INLINE static void _stow() { command(BLTOUCH_STOW); }
|
||||
FORCE_INLINE static void _set_SW_mode() { command(BLTOUCH_SW_MODE, BLTOUCH_DELAY); }
|
||||
FORCE_INLINE static void _set_5V_mode() { command(BLTOUCH_5V_MODE, BLTOUCH_SET5V_DELAY); }
|
||||
FORCE_INLINE static void _set_OD_mode() { command(BLTOUCH_OD_MODE, BLTOUCH_SETOD_DELAY); }
|
||||
|
||||
FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY, BLTOUCH_DEPLOY_DELAY); }
|
||||
FORCE_INLINE static void _stow() { command(BLTOUCH_STOW, BLTOUCH_STOW_DELAY); }
|
||||
|
||||
private:
|
||||
static bool set_deployed(const bool deploy);
|
||||
FORCE_INLINE static bool _deploy_query_alarm() { return command(BLTOUCH_DEPLOY, BLTOUCH_DEPLOY_DELAY); }
|
||||
FORCE_INLINE static bool _stow_query_alarm() { return command(BLTOUCH_STOW, BLTOUCH_STOW_DELAY); }
|
||||
|
||||
static void clear();
|
||||
static bool command(const BLTCommand cmd, const millis_t &ms);
|
||||
static bool deploy_proc();
|
||||
static bool stow_proc();
|
||||
static bool status_proc();
|
||||
};
|
||||
|
||||
// Deploy/stow angles for use by servo.cpp / servo.h
|
||||
#define BLTOUCH_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
|
||||
|
||||
extern BLTouch bltouch;
|
||||
|
|
|
|||
|
|
@ -112,8 +112,7 @@ void GcodeSuite::G34() {
|
|||
#endif
|
||||
|
||||
#if ENABLED(BLTOUCH)
|
||||
bltouch.reset();
|
||||
bltouch.stow();
|
||||
bltouch.init();
|
||||
#endif
|
||||
|
||||
// Always home with tool 0 active
|
||||
|
|
|
|||
|
|
@ -465,9 +465,6 @@
|
|||
#undef SERVO_DELAY
|
||||
#define SERVO_DELAY { 50 }
|
||||
#endif
|
||||
#ifndef BLTOUCH_DELAY
|
||||
#define BLTOUCH_DELAY 375
|
||||
#endif
|
||||
|
||||
// Always disable probe pin inverting for BLTouch
|
||||
#undef Z_MIN_PROBE_ENDSTOP_INVERTING
|
||||
|
|
|
|||
|
|
@ -1578,6 +1578,9 @@
|
|||
#ifndef Z_CLEARANCE_MULTI_PROBE
|
||||
#define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES
|
||||
#endif
|
||||
#if ENABLED(BLTOUCH) && !defined(BLTOUCH_DELAY)
|
||||
#define BLTOUCH_DELAY 500
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation
|
||||
|
|
|
|||
|
|
@ -210,6 +210,10 @@
|
|||
#error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration."
|
||||
#elif defined(BLTOUCH_HEATERS_OFF)
|
||||
#error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration."
|
||||
#elif defined(BLTOUCH_V3)
|
||||
#error "BLTOUCH_V3 is obsolete. Please update your configuration."
|
||||
#elif defined(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
|
||||
#error "BLTOUCH_FORCE_OPEN_DRAIN_MODE is obsolete. Please update your configuration."
|
||||
#elif defined(BEEPER)
|
||||
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
|
||||
#elif defined(SDCARDDETECT)
|
||||
|
|
@ -1018,6 +1022,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(BLTOUCH)
|
||||
#if BLTOUCH_DELAY < 200
|
||||
#error "BLTOUCH_DELAY less than 200 is unsafe and is not supported."
|
||||
#elif DISABLED(BLTOUCH_FORCE_5V_MODE) && NONE(ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUP_ZMIN_PROBE)
|
||||
#error "BLTOUCH without BLTOUCH_FORCE_5V_MODE requires ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN or ENDSTOPPULLUP_ZMIN_PROBE."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X))
|
||||
#error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X."
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -904,7 +904,7 @@
|
|||
#define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch")
|
||||
#endif
|
||||
#ifndef MSG_BLTOUCH_SW_MODE
|
||||
#define MSG_BLTOUCH_SW_MODE _UxGT("SW Deploy BLTouch")
|
||||
#define MSG_BLTOUCH_SW_MODE _UxGT("BLTouch SW Mode")
|
||||
#endif
|
||||
#ifndef MSG_BLTOUCH_5V_MODE
|
||||
#define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V Mode")
|
||||
|
|
|
|||
|
|
@ -174,15 +174,13 @@ static void lcd_factory_settings() {
|
|||
void menu_bltouch() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MAIN);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch.reset);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch.selftest);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch._reset);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch._selftest);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_DEPLOY, bltouch._deploy);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_STOW, bltouch._stow);
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch.set_SW_mode);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch.set_5V_mode);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch.set_OD_mode);
|
||||
#endif
|
||||
MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch._set_5V_mode);
|
||||
MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch._set_OD_mode);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -40,6 +40,10 @@
|
|||
#include "printcounter.h" // for print_job_timer
|
||||
#endif
|
||||
|
||||
#if ENABLED(BLTOUCH)
|
||||
#include "../feature/bltouch.h"
|
||||
#endif
|
||||
|
||||
Endstops endstops;
|
||||
|
||||
// private:
|
||||
|
|
@ -381,6 +385,9 @@ static void print_es_state(const bool is_hit, PGM_P const label=NULL) {
|
|||
}
|
||||
|
||||
void _O2 Endstops::M119() {
|
||||
#if ENABLED(BLTOUCH)
|
||||
bltouch._set_SW_mode();
|
||||
#endif
|
||||
SERIAL_ECHOLNPGM(MSG_M119_REPORT);
|
||||
#define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S))
|
||||
#if HAS_X_MIN
|
||||
|
|
@ -457,6 +464,10 @@ void _O2 Endstops::M119() {
|
|||
}
|
||||
#endif
|
||||
#endif
|
||||
#if ENABLED(BLTOUCH)
|
||||
bltouch._reset();
|
||||
if (enabled_globally) bltouch._stow();
|
||||
#endif
|
||||
} // Endstops::M119
|
||||
|
||||
// The following routines are called from an ISR context. It could be the temperature ISR, the
|
||||
|
|
|
|||
|
|
@ -283,7 +283,7 @@ float zprobe_zoffset; // Initialized by settings.load()
|
|||
#endif
|
||||
#if ENABLED(PROBING_STEPPERS_OFF)
|
||||
disable_e_steppers();
|
||||
#if DISABLED(DELTA)
|
||||
#if DISABLED(DELTA, HOME_AFTER_DEACTIVATE)
|
||||
disable_X(); disable_Y();
|
||||
#endif
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ exec_test $1 $2 "RAMPS4DUE_EFB with S_CURVE_ACCELERATION, EEPROM_SETTINGS, GCODE
|
|||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RADDS
|
||||
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG BLTOUCH AUTO_BED_LEVELING_BILINEAR \
|
||||
Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN
|
||||
Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN ENDSTOPPULLUPS
|
||||
opt_add Z2_MAX_ENDSTOP_INVERTING false
|
||||
opt_add Z3_MAX_ENDSTOP_INVERTING false
|
||||
pins_set RAMPS X_MAX_PIN -1
|
||||
|
|
|
|||
|
|
@ -273,7 +273,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
|
|||
#
|
||||
# Delta Config (generic) + ABL bilinear + BLTOUCH
|
||||
use_example_configs delta/generic
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_V3
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_FORCE_5V_MODE
|
||||
exec_test $1 $2 "Delta Config (generic) + ABL bilinear + BLTOUCH"
|
||||
#
|
||||
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -834,18 +834,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -848,18 +848,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -839,18 +839,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -875,18 +875,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -841,18 +841,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -838,18 +838,14 @@
|
|||
*/
|
||||
#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -829,18 +829,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -816,18 +816,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -829,18 +829,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -816,18 +816,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -827,18 +827,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -838,18 +838,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -829,18 +829,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -847,18 +847,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -838,18 +838,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -832,18 +832,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -832,18 +832,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -838,18 +838,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -837,18 +837,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -810,18 +810,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -810,18 +810,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -820,18 +820,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -834,18 +834,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -911,18 +911,14 @@
|
|||
*/
|
||||
#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -857,18 +857,14 @@
|
|||
*/
|
||||
#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -844,18 +844,14 @@
|
|||
*/
|
||||
#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -811,18 +811,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -811,18 +811,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -843,18 +843,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,7 +828,7 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -835,18 +835,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -848,18 +848,14 @@
|
|||
*/
|
||||
#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -848,18 +848,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -832,18 +832,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -840,18 +840,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -848,18 +848,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -848,18 +848,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -827,18 +827,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -832,18 +832,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -832,18 +832,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -829,18 +829,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -836,18 +836,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -868,18 +868,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -826,18 +826,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -841,18 +841,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -830,18 +830,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -830,18 +830,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -859,18 +859,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -879,18 +879,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -849,18 +849,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -827,18 +827,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -839,18 +839,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -837,18 +837,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -857,18 +857,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -847,18 +847,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -838,18 +838,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -828,18 +828,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -964,18 +964,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -910,18 +910,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -910,18 +910,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -910,18 +910,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -900,18 +900,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -915,18 +915,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -900,18 +900,14 @@
|
|||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
|
|
@ -904,7 +904,7 @@
|
|||
*/
|
||||
#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
#define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue