From 21ed43df5f423381e9f5a7a32930e6e9703af044 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 9 Dec 2016 01:33:24 -0800 Subject: [PATCH] New Dutch terms --- Marlin/language_nl.h | 114 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 103 insertions(+), 11 deletions(-) diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index 039b125e27..31498eb5f0 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -35,12 +35,17 @@ #define WELCOME_MSG MACHINE_NAME " gereed." #define MSG_SD_INSERTED "Kaart ingestoken" #define MSG_SD_REMOVED "Kaart verwijderd" +#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters #define MSG_MAIN "Hoofdmenu" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Motoren uit" #define MSG_AUTO_HOME "Auto home" +#define MSG_AUTO_HOME_X "Home X" +#define MSG_AUTO_HOME_Y "Home Y" +#define MSG_AUTO_HOME_Z "Home Z" #define MSG_LEVEL_BED_HOMING "Homing XYZ" #define MSG_LEVEL_BED_WAITING "Klik voor begin" +#define MSG_LEVEL_BED_NEXT_POINT "Volgende Plaats" #define MSG_LEVEL_BED_DONE "Bed level kompl." #define MSG_LEVEL_BED_CANCEL "Bed level afbr." #define MSG_SET_HOME_OFFSETS "Zet home offsets" @@ -48,13 +53,13 @@ #define MSG_SET_ORIGIN "Nulpunt instellen" #define MSG_PREHEAT_1 "PLA voorverwarmen" #define MSG_PREHEAT_1_N "PLA voorverw. " -#define MSG_PREHEAT_1_ALL "PLA voorverw. aan" -#define MSG_PREHEAT_1_BEDONLY "PLA voorverw. Bed" +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N "aan" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N "Bed" #define MSG_PREHEAT_1_SETTINGS "PLA verw. conf" #define MSG_PREHEAT_2 "ABS voorverwarmen" #define MSG_PREHEAT_2_N "ABS voorverw. " -#define MSG_PREHEAT_2_ALL "ABS voorverw. aan" -#define MSG_PREHEAT_2_BEDONLY "ABS voorverw. Bed" +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N "aan" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N "Bed" #define MSG_PREHEAT_2_SETTINGS "ABS verw. conf" #define MSG_COOLDOWN "Afkoelen" #define MSG_SWITCH_PS_ON "Stroom aan" @@ -62,6 +67,7 @@ #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "As verplaatsen" +#define MSG_LEVEL_BED "Level bed" #define MSG_MOVE_X "Verplaats X" #define MSG_MOVE_Y "Verplaats Y" #define MSG_MOVE_Z "Verplaats Z" @@ -76,9 +82,9 @@ #define MSG_FAN_SPEED "Fan snelheid" #define MSG_FLOW "Flow" #define MSG_CONTROL "Control" -#define MSG_MIN LCD_STR_THERMOMETER " Min" -#define MSG_MAX LCD_STR_THERMOMETER " Max" -#define MSG_FACTOR LCD_STR_THERMOMETER " Fact" +#define MSG_MIN " " LCD_STR_THERMOMETER " Min" +#define MSG_MAX " " LCD_STR_THERMOMETER " Max" +#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fact" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "Aan " #define MSG_OFF "Uit" @@ -86,6 +92,7 @@ #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" +#define MSG_SELECT "Selecteer" #define MSG_ACC "Versn" #define MSG_VX_JERK "Vx-jerk" #define MSG_VY_JERK "Vy-jerk" @@ -130,7 +137,7 @@ #define MSG_NO_MOVE "Geen beweging." #define MSG_KILLED "Afgebroken. " #define MSG_STOPPED "Gestopt. " -#define MSG_CONTROL_RETRACT "Retract mm" +#define MSG_CONTROL_RETRACT "Retract mm" //accepted English term in Dutch #define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm" #define MSG_CONTROL_RETRACTF "Retract F" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" @@ -142,20 +149,28 @@ #define MSG_INIT_SDCARD "Init. SD kaart" #define MSG_CNG_SDCARD "Verv. SD Kaart" #define MSG_ZPROBE_OUT "Z probe uit. bed" +#define MSG_BLTOUCH_SELFTEST "BLTouch Zelf-Test" +#define MSG_BLTOUCH_RESET "Reset BLTouch" #define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST -#define MSG_FIRST "first" -#define MSG_ZPROBE_ZOFFSET "Z Offset" +#define MSG_FIRST "Eerst" +#define MSG_ZPROBE_ZOFFSET "Z Offset" //accepted English term in Dutch #define MSG_BABYSTEP_X "Babystap X" #define MSG_BABYSTEP_Y "Babystap Y" #define MSG_BABYSTEP_Z "Babystap Z" #define MSG_ENDSTOP_ABORT "Endstop afbr." -#define MSG_HEATING_FAILED_LCD "voorverw. fout" +#define MSG_HEATING_FAILED_LCD "Voorverw. fout" #define MSG_ERR_REDUNDANT_TEMP "Redun. temp fout" #define MSG_THERMAL_RUNAWAY "Therm. wegloop" #define MSG_ERR_MAXTEMP "Err: Max. temp" #define MSG_ERR_MINTEMP "Err: Min. temp" #define MSG_ERR_MAXTEMP_BED "Err: Max.tmp bed" #define MSG_ERR_MINTEMP_BED "Err: Min.tmp bed" +#define MSG_ERR_Z_HOMING "Fout Z homing" +#define MSG_HALTED "PRINTER GESTOPT" +#define MSG_PLEASE_RESET "Reset A.U.B." +#define MSG_SHORT_DAY "d" // One character only. Keep English standard +#define MSG_SHORT_HOUR "h" // One character only +#define MSG_SHORT_MINUTE "m" // One character only #define MSG_HEATING "Voorwarmen..." #define MSG_HEATING_COMPLETE "Voorverw. kompl." #define MSG_BED_HEATING "Bed voorverw." @@ -166,4 +181,81 @@ #define MSG_DELTA_CALIBRATE_Z "Kalibreer Z" #define MSG_DELTA_CALIBRATE_CENTER "Kalibreer Midden" +#define MSG_INFO_STATS_MENU "Printer Stats" +#define MSG_INFO_BOARD_MENU "Board Info" //accepted English term in Dutch +#define MSG_INFO_THERMISTOR_MENU "Thermistors" +#define MSG_INFO_EXTRUDERS "Extruders" +#define MSG_INFO_BAUDRATE "Baud" +#define MSG_INFO_MENU "Over Printer" +#define MSG_INFO_PRINTER_MENU "Printer Info" +#define MSG_INFO_PROTOCOL "Protocol" +#define MSG_LIGHTS_ON "Case licht aan" +#define MSG_LIGHTS_OFF "Case licht uit" + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT "Printed Aantal" + #define MSG_INFO_COMPLETED_PRINTS "Totaal Voltooid" + #define MSG_INFO_PRINT_TIME "Totale Printtijd" + #define MSG_INFO_PRINT_LONGEST "Langste Printtijd" + #define MSG_INFO_PRINT_FILAMENT "Totaal Extrudeert" +#else + #define MSG_INFO_PRINT_COUNT "Aantal" + #define MSG_INFO_COMPLETED_PRINTS "Voltooid" + #define MSG_INFO_PRINT_TIME "Printtijd " + #define MSG_INFO_PRINT_LONGEST "Langste" + #define MSG_INFO_PRINT_FILAMENT "Extrud." +#endif + +#define MSG_INFO_MIN_TEMP "Min Temp" +#define MSG_INFO_MAX_TEMP "Max Temp" +#define MSG_INFO_PSU "Power Supply" //accepted English term in Dutch + +#define MSG_DRIVE_STRENGTH "Motorstroom" +#define MSG_DAC_PERCENT "Driver %" //accepted English term in Dutch +#define MSG_DAC_EEPROM_WRITE "DAC Opslaan" +#define MSG_FILAMENT_CHANGE_HEADER "WISSEL FILAMENT" +#define MSG_FILAMENT_CHANGE_OPTION_HEADER "WISSEL OPTIES:" +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrudeer meer" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Hervat print" + +// +// Filament Change screens show up to 3 lines on a 4-line display +// ...or up to 2 lines on a 3-line display +// +#if LCD_HEIGHT >= 4 + // Up to 3 lines + #define MSG_FILAMENT_CHANGE_INIT_1 "Wacht voor start" + #define MSG_FILAMENT_CHANGE_INIT_2 "filament te" + #define MSG_FILAMENT_CHANGE_INIT_3 "verwisselen" + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wacht voor" + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament uit" + #define MSG_FILAMENT_CHANGE_UNLOAD_3 "te laden" + #define MSG_FILAMENT_CHANGE_INSERT_1 "Laad filament" + #define MSG_FILAMENT_CHANGE_INSERT_2 "en druk knop" + #define MSG_FILAMENT_CHANGE_INSERT_3 "om verder..." + #define MSG_FILAMENT_CHANGE_LOAD_1 "Wacht voor" + #define MSG_FILAMENT_CHANGE_LOAD_2 "filament te" + #define MSG_FILAMENT_CHANGE_LOAD_3 "laden" + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wacht voor" + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament te" + #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "extruderen" + #define MSG_FILAMENT_CHANGE_RESUME_1 "Wacht voor print" + #define MSG_FILAMENT_CHANGE_RESUME_2 "om verder" + #define MSG_FILAMENT_CHANGE_RESUME_3 "te gaan" +#else // LCD_HEIGHT < 4 + // Up to 2 lines + #define MSG_FILAMENT_CHANGE_INIT_1 "Wacht voor" + #define MSG_FILAMENT_CHANGE_INIT_2 "start..." + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wacht voor" + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "uitladen..." + #define MSG_FILAMENT_CHANGE_INSERT_1 "Laad filament" + #define MSG_FILAMENT_CHANGE_INSERT_2 "en druk knop" + #define MSG_FILAMENT_CHANGE_LOAD_1 "Wacht voor" + #define MSG_FILAMENT_CHANGE_LOAD_2 "inladen..." + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wacht voor" + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrudering" + #define MSG_FILAMENT_CHANGE_RESUME_1 "Wacht voor" + #define MSG_FILAMENT_CHANGE_RESUME_2 "printing..." +#endif // LCD_HEIGHT < 4 + #endif // LANGUAGE_NL_H