0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

🎨 Detab C/C++

Browse source
This commit is contained in:
Scott Lahteine 2023-06-05 00:43:31 -05:00
parent 3b681f7b74
commit 70288c6c4f
19 changed files with 1415 additions and 1554 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

264
Marlin/src/HAL/DUE/usb/genclk.h
View file

@ -74,17 +74,17 @@ extern "C" {
//@{
enum genclk_source {
GENCLK_PCK_SRC_SLCK_RC = 0, //!< Internal 32kHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_SLCK_XTAL = 1, //!< External 32kHz crystal oscillator as PCK source clock
GENCLK_PCK_SRC_SLCK_BYPASS = 2, //!< External 32kHz bypass oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_4M_RC = 3, //!< Internal 4MHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_8M_RC = 4, //!< Internal 8MHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_12M_RC = 5, //!< Internal 12MHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_XTAL = 6, //!< External crystal oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_BYPASS = 7, //!< External bypass oscillator as PCK source clock
GENCLK_PCK_SRC_PLLACK = 8, //!< Use PLLACK as PCK source clock
GENCLK_PCK_SRC_PLLBCK = 9, //!< Use PLLBCK as PCK source clock
GENCLK_PCK_SRC_MCK = 10, //!< Use Master Clk as PCK source clock
GENCLK_PCK_SRC_SLCK_RC = 0, //!< Internal 32kHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_SLCK_XTAL = 1, //!< External 32kHz crystal oscillator as PCK source clock
GENCLK_PCK_SRC_SLCK_BYPASS = 2, //!< External 32kHz bypass oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_4M_RC = 3, //!< Internal 4MHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_8M_RC = 4, //!< Internal 8MHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_12M_RC = 5, //!< Internal 12MHz RC oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_XTAL = 6, //!< External crystal oscillator as PCK source clock
GENCLK_PCK_SRC_MAINCK_BYPASS = 7, //!< External bypass oscillator as PCK source clock
GENCLK_PCK_SRC_PLLACK = 8, //!< Use PLLACK as PCK source clock
GENCLK_PCK_SRC_PLLBCK = 9, //!< Use PLLBCK as PCK source clock
GENCLK_PCK_SRC_MCK = 10, //!< Use Master Clk as PCK source clock
};
//@}
@ -93,176 +93,162 @@ enum genclk_source {
//@{
enum genclk_divider {
GENCLK_PCK_PRES_1 = PMC_PCK_PRES_CLK_1, //!< Set PCK clock prescaler to 1
GENCLK_PCK_PRES_2 = PMC_PCK_PRES_CLK_2, //!< Set PCK clock prescaler to 2
GENCLK_PCK_PRES_4 = PMC_PCK_PRES_CLK_4, //!< Set PCK clock prescaler to 4
GENCLK_PCK_PRES_8 = PMC_PCK_PRES_CLK_8, //!< Set PCK clock prescaler to 8
GENCLK_PCK_PRES_16 = PMC_PCK_PRES_CLK_16, //!< Set PCK clock prescaler to 16
GENCLK_PCK_PRES_32 = PMC_PCK_PRES_CLK_32, //!< Set PCK clock prescaler to 32
GENCLK_PCK_PRES_64 = PMC_PCK_PRES_CLK_64, //!< Set PCK clock prescaler to 64
GENCLK_PCK_PRES_1 = PMC_PCK_PRES_CLK_1, //!< Set PCK clock prescaler to 1
GENCLK_PCK_PRES_2 = PMC_PCK_PRES_CLK_2, //!< Set PCK clock prescaler to 2
GENCLK_PCK_PRES_4 = PMC_PCK_PRES_CLK_4, //!< Set PCK clock prescaler to 4
GENCLK_PCK_PRES_8 = PMC_PCK_PRES_CLK_8, //!< Set PCK clock prescaler to 8
GENCLK_PCK_PRES_16 = PMC_PCK_PRES_CLK_16, //!< Set PCK clock prescaler to 16
GENCLK_PCK_PRES_32 = PMC_PCK_PRES_CLK_32, //!< Set PCK clock prescaler to 32
GENCLK_PCK_PRES_64 = PMC_PCK_PRES_CLK_64, //!< Set PCK clock prescaler to 64
};
//@}
struct genclk_config {
uint32_t ctrl;
uint32_t ctrl;
};
static inline void genclk_config_defaults(struct genclk_config *p_cfg,
uint32_t ul_id)
{
ul_id = ul_id;
p_cfg->ctrl = 0;
static inline void genclk_config_defaults(struct genclk_config *p_cfg, uint32_t ul_id) {
ul_id = ul_id;
p_cfg->ctrl = 0;
}
static inline void genclk_config_read(struct genclk_config *p_cfg,
uint32_t ul_id)
{
p_cfg->ctrl = PMC->PMC_PCK[ul_id];
static inline void genclk_config_read(struct genclk_config *p_cfg, uint32_t ul_id) {
p_cfg->ctrl = PMC->PMC_PCK[ul_id];
}
static inline void genclk_config_write(const struct genclk_config *p_cfg,
uint32_t ul_id)
{
PMC->PMC_PCK[ul_id] = p_cfg->ctrl;
static inline void genclk_config_write(const struct genclk_config *p_cfg, uint32_t ul_id) {
PMC->PMC_PCK[ul_id] = p_cfg->ctrl;
}
//! \name Programmable Clock Source and Prescaler configuration
//@{
static inline void genclk_config_set_source(struct genclk_config *p_cfg,
enum genclk_source e_src)
{
p_cfg->ctrl &= (~PMC_PCK_CSS_Msk);
static inline void genclk_config_set_source(struct genclk_config *p_cfg, enum genclk_source e_src) {
p_cfg->ctrl &= (~PMC_PCK_CSS_Msk);
switch (e_src) {
case GENCLK_PCK_SRC_SLCK_RC:
case GENCLK_PCK_SRC_SLCK_XTAL:
case GENCLK_PCK_SRC_SLCK_BYPASS:
p_cfg->ctrl |= (PMC_PCK_CSS_SLOW_CLK);
break;
switch (e_src) {
case GENCLK_PCK_SRC_SLCK_RC:
case GENCLK_PCK_SRC_SLCK_XTAL:
case GENCLK_PCK_SRC_SLCK_BYPASS:
p_cfg->ctrl |= (PMC_PCK_CSS_SLOW_CLK);
break;
case GENCLK_PCK_SRC_MAINCK_4M_RC:
case GENCLK_PCK_SRC_MAINCK_8M_RC:
case GENCLK_PCK_SRC_MAINCK_12M_RC:
case GENCLK_PCK_SRC_MAINCK_XTAL:
case GENCLK_PCK_SRC_MAINCK_BYPASS:
p_cfg->ctrl |= (PMC_PCK_CSS_MAIN_CLK);
break;
case GENCLK_PCK_SRC_MAINCK_4M_RC:
case GENCLK_PCK_SRC_MAINCK_8M_RC:
case GENCLK_PCK_SRC_MAINCK_12M_RC:
case GENCLK_PCK_SRC_MAINCK_XTAL:
case GENCLK_PCK_SRC_MAINCK_BYPASS:
p_cfg->ctrl |= (PMC_PCK_CSS_MAIN_CLK);
break;
case GENCLK_PCK_SRC_PLLACK:
p_cfg->ctrl |= (PMC_PCK_CSS_PLLA_CLK);
break;
case GENCLK_PCK_SRC_PLLACK:
p_cfg->ctrl |= (PMC_PCK_CSS_PLLA_CLK);
break;
case GENCLK_PCK_SRC_PLLBCK:
p_cfg->ctrl |= (PMC_PCK_CSS_UPLL_CLK);
break;
case GENCLK_PCK_SRC_PLLBCK:
p_cfg->ctrl |= (PMC_PCK_CSS_UPLL_CLK);
break;
case GENCLK_PCK_SRC_MCK:
p_cfg->ctrl |= (PMC_PCK_CSS_MCK);
break;
}
case GENCLK_PCK_SRC_MCK:
p_cfg->ctrl |= (PMC_PCK_CSS_MCK);
break;
}
}
static inline void genclk_config_set_divider(struct genclk_config *p_cfg,
uint32_t e_divider)
{
p_cfg->ctrl &= ~PMC_PCK_PRES_Msk;
p_cfg->ctrl |= e_divider;
static inline void genclk_config_set_divider(struct genclk_config *p_cfg, uint32_t e_divider) {
p_cfg->ctrl &= ~PMC_PCK_PRES_Msk;
p_cfg->ctrl |= e_divider;
}
//@}
static inline void genclk_enable(const struct genclk_config *p_cfg,
uint32_t ul_id)
{
PMC->PMC_PCK[ul_id] = p_cfg->ctrl;
pmc_enable_pck(ul_id);
static inline void genclk_enable(const struct genclk_config *p_cfg, uint32_t ul_id) {
PMC->PMC_PCK[ul_id] = p_cfg->ctrl;
pmc_enable_pck(ul_id);
}
static inline void genclk_disable(uint32_t ul_id)
{
pmc_disable_pck(ul_id);
static inline void genclk_disable(uint32_t ul_id) {
pmc_disable_pck(ul_id);
}
static inline void genclk_enable_source(enum genclk_source e_src)
{
switch (e_src) {
case GENCLK_PCK_SRC_SLCK_RC:
if (!osc_is_ready(OSC_SLCK_32K_RC)) {
osc_enable(OSC_SLCK_32K_RC);
osc_wait_ready(OSC_SLCK_32K_RC);
}
break;
static inline void genclk_enable_source(enum genclk_source e_src) {
switch (e_src) {
case GENCLK_PCK_SRC_SLCK_RC:
if (!osc_is_ready(OSC_SLCK_32K_RC)) {
osc_enable(OSC_SLCK_32K_RC);
osc_wait_ready(OSC_SLCK_32K_RC);
}
break;
case GENCLK_PCK_SRC_SLCK_XTAL:
if (!osc_is_ready(OSC_SLCK_32K_XTAL)) {
osc_enable(OSC_SLCK_32K_XTAL);
osc_wait_ready(OSC_SLCK_32K_XTAL);
}
break;
case GENCLK_PCK_SRC_SLCK_XTAL:
if (!osc_is_ready(OSC_SLCK_32K_XTAL)) {
osc_enable(OSC_SLCK_32K_XTAL);
osc_wait_ready(OSC_SLCK_32K_XTAL);
}
break;
case GENCLK_PCK_SRC_SLCK_BYPASS:
if (!osc_is_ready(OSC_SLCK_32K_BYPASS)) {
osc_enable(OSC_SLCK_32K_BYPASS);
osc_wait_ready(OSC_SLCK_32K_BYPASS);
}
break;
case GENCLK_PCK_SRC_SLCK_BYPASS:
if (!osc_is_ready(OSC_SLCK_32K_BYPASS)) {
osc_enable(OSC_SLCK_32K_BYPASS);
osc_wait_ready(OSC_SLCK_32K_BYPASS);
}
break;
case GENCLK_PCK_SRC_MAINCK_4M_RC:
if (!osc_is_ready(OSC_MAINCK_4M_RC)) {
osc_enable(OSC_MAINCK_4M_RC);
osc_wait_ready(OSC_MAINCK_4M_RC);
}
break;
case GENCLK_PCK_SRC_MAINCK_4M_RC:
if (!osc_is_ready(OSC_MAINCK_4M_RC)) {
osc_enable(OSC_MAINCK_4M_RC);
osc_wait_ready(OSC_MAINCK_4M_RC);
}
break;
case GENCLK_PCK_SRC_MAINCK_8M_RC:
if (!osc_is_ready(OSC_MAINCK_8M_RC)) {
osc_enable(OSC_MAINCK_8M_RC);
osc_wait_ready(OSC_MAINCK_8M_RC);
}
break;
case GENCLK_PCK_SRC_MAINCK_8M_RC:
if (!osc_is_ready(OSC_MAINCK_8M_RC)) {
osc_enable(OSC_MAINCK_8M_RC);
osc_wait_ready(OSC_MAINCK_8M_RC);
}
break;
case GENCLK_PCK_SRC_MAINCK_12M_RC:
if (!osc_is_ready(OSC_MAINCK_12M_RC)) {
osc_enable(OSC_MAINCK_12M_RC);
osc_wait_ready(OSC_MAINCK_12M_RC);
}
break;
case GENCLK_PCK_SRC_MAINCK_12M_RC:
if (!osc_is_ready(OSC_MAINCK_12M_RC)) {
osc_enable(OSC_MAINCK_12M_RC);
osc_wait_ready(OSC_MAINCK_12M_RC);
}
break;
case GENCLK_PCK_SRC_MAINCK_XTAL:
if (!osc_is_ready(OSC_MAINCK_XTAL)) {
osc_enable(OSC_MAINCK_XTAL);
osc_wait_ready(OSC_MAINCK_XTAL);
}
break;
case GENCLK_PCK_SRC_MAINCK_XTAL:
if (!osc_is_ready(OSC_MAINCK_XTAL)) {
osc_enable(OSC_MAINCK_XTAL);
osc_wait_ready(OSC_MAINCK_XTAL);
}
break;
case GENCLK_PCK_SRC_MAINCK_BYPASS:
if (!osc_is_ready(OSC_MAINCK_BYPASS)) {
osc_enable(OSC_MAINCK_BYPASS);
osc_wait_ready(OSC_MAINCK_BYPASS);
}
break;
case GENCLK_PCK_SRC_MAINCK_BYPASS:
if (!osc_is_ready(OSC_MAINCK_BYPASS)) {
osc_enable(OSC_MAINCK_BYPASS);
osc_wait_ready(OSC_MAINCK_BYPASS);
}
break;
#ifdef CONFIG_PLL0_SOURCE
case GENCLK_PCK_SRC_PLLACK:
pll_enable_config_defaults(0);
break;
#endif
#ifdef CONFIG_PLL0_SOURCE
case GENCLK_PCK_SRC_PLLACK:
pll_enable_config_defaults(0);
break;
#endif
#ifdef CONFIG_PLL1_SOURCE
case GENCLK_PCK_SRC_PLLBCK:
pll_enable_config_defaults(1);
break;
#endif
#ifdef CONFIG_PLL1_SOURCE
case GENCLK_PCK_SRC_PLLBCK:
pll_enable_config_defaults(1);
break;
#endif
case GENCLK_PCK_SRC_MCK:
break;
case GENCLK_PCK_SRC_MCK:
break;
default:
Assert(false);
break;
}
default:
Assert(false);
break;
}
}
//! @}

199
Marlin/src/HAL/DUE/usb/osc.h
View file

@ -62,28 +62,28 @@ extern "C" {
* should be defined by the board code, otherwise default value are used.
*/
#ifndef BOARD_FREQ_SLCK_XTAL
# warning The board slow clock xtal frequency has not been defined.
# define BOARD_FREQ_SLCK_XTAL (32768UL)
#warning The board slow clock xtal frequency has not been defined.
#define BOARD_FREQ_SLCK_XTAL (32768UL)
#endif
#ifndef BOARD_FREQ_SLCK_BYPASS
# warning The board slow clock bypass frequency has not been defined.
# define BOARD_FREQ_SLCK_BYPASS (32768UL)
#warning The board slow clock bypass frequency has not been defined.
#define BOARD_FREQ_SLCK_BYPASS (32768UL)
#endif
#ifndef BOARD_FREQ_MAINCK_XTAL
# warning The board main clock xtal frequency has not been defined.
# define BOARD_FREQ_MAINCK_XTAL (12000000UL)
#warning The board main clock xtal frequency has not been defined.
#define BOARD_FREQ_MAINCK_XTAL (12000000UL)
#endif
#ifndef BOARD_FREQ_MAINCK_BYPASS
# warning The board main clock bypass frequency has not been defined.
# define BOARD_FREQ_MAINCK_BYPASS (12000000UL)
#warning The board main clock bypass frequency has not been defined.
#define BOARD_FREQ_MAINCK_BYPASS (12000000UL)
#endif
#ifndef BOARD_OSC_STARTUP_US
# warning The board main clock xtal startup time has not been defined.
# define BOARD_OSC_STARTUP_US (15625UL)
#warning The board main clock xtal startup time has not been defined.
#define BOARD_OSC_STARTUP_US (15625UL)
#endif
/**
@ -115,122 +115,118 @@ extern "C" {
#define OSC_MAINCK_BYPASS_HZ BOARD_FREQ_MAINCK_BYPASS //!< External bypass oscillator.
//@}
static inline void osc_enable(uint32_t ul_id)
{
switch (ul_id) {
case OSC_SLCK_32K_RC:
break;
static inline void osc_enable(uint32_t ul_id) {
switch (ul_id) {
case OSC_SLCK_32K_RC:
break;
case OSC_SLCK_32K_XTAL:
pmc_switch_sclk_to_32kxtal(PMC_OSC_XTAL);
break;
case OSC_SLCK_32K_XTAL:
pmc_switch_sclk_to_32kxtal(PMC_OSC_XTAL);
break;
case OSC_SLCK_32K_BYPASS:
pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS);
break;
case OSC_SLCK_32K_BYPASS:
pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS);
break;
case OSC_MAINCK_4M_RC:
pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz);
break;
case OSC_MAINCK_4M_RC:
pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz);
break;
case OSC_MAINCK_8M_RC:
pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_8_MHz);
break;
case OSC_MAINCK_8M_RC:
pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_8_MHz);
break;
case OSC_MAINCK_12M_RC:
pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz);
break;
case OSC_MAINCK_12M_RC:
pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz);
break;
case OSC_MAINCK_XTAL:
pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*,
pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
OSC_SLCK_32K_RC_HZ)*/);
break;
case OSC_MAINCK_XTAL:
pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*,
pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
OSC_SLCK_32K_RC_HZ)*/);
break;
case OSC_MAINCK_BYPASS:
pmc_switch_mainck_to_xtal(PMC_OSC_BYPASS/*,
pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
OSC_SLCK_32K_RC_HZ)*/);
break;
}
case OSC_MAINCK_BYPASS:
pmc_switch_mainck_to_xtal(PMC_OSC_BYPASS/*,
pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
OSC_SLCK_32K_RC_HZ)*/);
break;
}
}
static inline void osc_disable(uint32_t ul_id)
{
switch (ul_id) {
case OSC_SLCK_32K_RC:
case OSC_SLCK_32K_XTAL:
case OSC_SLCK_32K_BYPASS:
break;
static inline void osc_disable(uint32_t ul_id) {
switch (ul_id) {
case OSC_SLCK_32K_RC:
case OSC_SLCK_32K_XTAL:
case OSC_SLCK_32K_BYPASS:
break;
case OSC_MAINCK_4M_RC:
case OSC_MAINCK_8M_RC:
case OSC_MAINCK_12M_RC:
pmc_osc_disable_fastrc();
break;
case OSC_MAINCK_4M_RC:
case OSC_MAINCK_8M_RC:
case OSC_MAINCK_12M_RC:
pmc_osc_disable_fastrc();
break;
case OSC_MAINCK_XTAL:
pmc_osc_disable_xtal(PMC_OSC_XTAL);
break;
case OSC_MAINCK_XTAL:
pmc_osc_disable_xtal(PMC_OSC_XTAL);
break;
case OSC_MAINCK_BYPASS:
pmc_osc_disable_xtal(PMC_OSC_BYPASS);
break;
}
case OSC_MAINCK_BYPASS:
pmc_osc_disable_xtal(PMC_OSC_BYPASS);
break;
}
}
static inline bool osc_is_ready(uint32_t ul_id)
{
switch (ul_id) {
case OSC_SLCK_32K_RC:
return 1;
static inline bool osc_is_ready(uint32_t ul_id) {
switch (ul_id) {
case OSC_SLCK_32K_RC:
return 1;
case OSC_SLCK_32K_XTAL:
case OSC_SLCK_32K_BYPASS:
return pmc_osc_is_ready_32kxtal();
case OSC_SLCK_32K_XTAL:
case OSC_SLCK_32K_BYPASS:
return pmc_osc_is_ready_32kxtal();
case OSC_MAINCK_4M_RC:
case OSC_MAINCK_8M_RC:
case OSC_MAINCK_12M_RC:
case OSC_MAINCK_XTAL:
case OSC_MAINCK_BYPASS:
return pmc_osc_is_ready_mainck();
}
case OSC_MAINCK_4M_RC:
case OSC_MAINCK_8M_RC:
case OSC_MAINCK_12M_RC:
case OSC_MAINCK_XTAL:
case OSC_MAINCK_BYPASS:
return pmc_osc_is_ready_mainck();
}
return 0;
return 0;
}
static inline uint32_t osc_get_rate(uint32_t ul_id)
{
switch (ul_id) {
case OSC_SLCK_32K_RC:
return OSC_SLCK_32K_RC_HZ;
static inline uint32_t osc_get_rate(uint32_t ul_id) {
switch (ul_id) {
case OSC_SLCK_32K_RC:
return OSC_SLCK_32K_RC_HZ;
case OSC_SLCK_32K_XTAL:
return BOARD_FREQ_SLCK_XTAL;
case OSC_SLCK_32K_XTAL:
return BOARD_FREQ_SLCK_XTAL;
case OSC_SLCK_32K_BYPASS:
return BOARD_FREQ_SLCK_BYPASS;
case OSC_SLCK_32K_BYPASS:
return BOARD_FREQ_SLCK_BYPASS;
case OSC_MAINCK_4M_RC:
return OSC_MAINCK_4M_RC_HZ;
case OSC_MAINCK_4M_RC:
return OSC_MAINCK_4M_RC_HZ;
case OSC_MAINCK_8M_RC:
return OSC_MAINCK_8M_RC_HZ;
case OSC_MAINCK_8M_RC:
return OSC_MAINCK_8M_RC_HZ;
case OSC_MAINCK_12M_RC:
return OSC_MAINCK_12M_RC_HZ;
case OSC_MAINCK_12M_RC:
return OSC_MAINCK_12M_RC_HZ;
case OSC_MAINCK_XTAL:
return BOARD_FREQ_MAINCK_XTAL;
case OSC_MAINCK_XTAL:
return BOARD_FREQ_MAINCK_XTAL;
case OSC_MAINCK_BYPASS:
return BOARD_FREQ_MAINCK_BYPASS;
}
case OSC_MAINCK_BYPASS:
return BOARD_FREQ_MAINCK_BYPASS;
}
return 0;
return 0;
}
/**
@ -241,11 +237,10 @@ static inline uint32_t osc_get_rate(uint32_t ul_id)
*
* \param id A number identifying the oscillator to wait for.
*/
static inline void osc_wait_ready(uint8_t id)
{
while (!osc_is_ready(id)) {
/* Do nothing */
}
static inline void osc_wait_ready(uint8_t id) {
while (!osc_is_ready(id)) {
/* Do nothing */
}
}
//! @}

238
Marlin/src/HAL/DUE/usb/pll.h
View file

@ -77,22 +77,22 @@ extern "C" {
#define PLL_COUNT 0x3FU
enum pll_source {
PLL_SRC_MAINCK_4M_RC = OSC_MAINCK_4M_RC, //!< Internal 4MHz RC oscillator.
PLL_SRC_MAINCK_8M_RC = OSC_MAINCK_8M_RC, //!< Internal 8MHz RC oscillator.
PLL_SRC_MAINCK_12M_RC = OSC_MAINCK_12M_RC, //!< Internal 12MHz RC oscillator.
PLL_SRC_MAINCK_XTAL = OSC_MAINCK_XTAL, //!< External crystal oscillator.
PLL_SRC_MAINCK_BYPASS = OSC_MAINCK_BYPASS, //!< External bypass oscillator.
PLL_NR_SOURCES, //!< Number of PLL sources.
PLL_SRC_MAINCK_4M_RC = OSC_MAINCK_4M_RC, //!< Internal 4MHz RC oscillator.
PLL_SRC_MAINCK_8M_RC = OSC_MAINCK_8M_RC, //!< Internal 8MHz RC oscillator.
PLL_SRC_MAINCK_12M_RC = OSC_MAINCK_12M_RC, //!< Internal 12MHz RC oscillator.
PLL_SRC_MAINCK_XTAL = OSC_MAINCK_XTAL, //!< External crystal oscillator.
PLL_SRC_MAINCK_BYPASS = OSC_MAINCK_BYPASS, //!< External bypass oscillator.
PLL_NR_SOURCES, //!< Number of PLL sources.
};
struct pll_config {
uint32_t ctrl;
uint32_t ctrl;
};
#define pll_get_default_rate(pll_id) \
((osc_get_rate(CONFIG_PLL##pll_id##_SOURCE) \
* CONFIG_PLL##pll_id##_MUL) \
/ CONFIG_PLL##pll_id##_DIV)
((osc_get_rate(CONFIG_PLL##pll_id##_SOURCE) \
* CONFIG_PLL##pll_id##_MUL) \
/ CONFIG_PLL##pll_id##_DIV)
/* Force UTMI PLL parameters (Hardware defined) */
#ifdef CONFIG_PLL1_SOURCE
@ -113,145 +113,130 @@ struct pll_config {
* is hidden in this implementation. Use mul as mul effective value.
*/
static inline void pll_config_init(struct pll_config *p_cfg,
enum pll_source e_src, uint32_t ul_div, uint32_t ul_mul)
{
uint32_t vco_hz;
enum pll_source e_src, uint32_t ul_div, uint32_t ul_mul) {
uint32_t vco_hz;
Assert(e_src < PLL_NR_SOURCES);
Assert(e_src < PLL_NR_SOURCES);
if (ul_div == 0 && ul_mul == 0) { /* Must only be true for UTMI PLL */
p_cfg->ctrl = CKGR_UCKR_UPLLCOUNT(PLL_COUNT);
} else { /* PLLA */
/* Calculate internal VCO frequency */
vco_hz = osc_get_rate(e_src) / ul_div;
Assert(vco_hz >= PLL_INPUT_MIN_HZ);
Assert(vco_hz <= PLL_INPUT_MAX_HZ);
if (ul_div == 0 && ul_mul == 0) { /* Must only be true for UTMI PLL */
p_cfg->ctrl = CKGR_UCKR_UPLLCOUNT(PLL_COUNT);
}
else { /* PLLA */
/* Calculate internal VCO frequency */
vco_hz = osc_get_rate(e_src) / ul_div;
Assert(vco_hz >= PLL_INPUT_MIN_HZ);
Assert(vco_hz <= PLL_INPUT_MAX_HZ);
vco_hz *= ul_mul;
Assert(vco_hz >= PLL_OUTPUT_MIN_HZ);
Assert(vco_hz <= PLL_OUTPUT_MAX_HZ);
vco_hz *= ul_mul;
Assert(vco_hz >= PLL_OUTPUT_MIN_HZ);
Assert(vco_hz <= PLL_OUTPUT_MAX_HZ);
/* PMC hardware will automatically make it mul+1 */
p_cfg->ctrl = CKGR_PLLAR_MULA(ul_mul - 1) | CKGR_PLLAR_DIVA(ul_div) | CKGR_PLLAR_PLLACOUNT(PLL_COUNT);
}
/* PMC hardware will automatically make it mul+1 */
p_cfg->ctrl = CKGR_PLLAR_MULA(ul_mul - 1) | CKGR_PLLAR_DIVA(ul_div) | CKGR_PLLAR_PLLACOUNT(PLL_COUNT);
}
}
#define pll_config_defaults(cfg, pll_id) \
pll_config_init(cfg, \
CONFIG_PLL##pll_id##_SOURCE, \
CONFIG_PLL##pll_id##_DIV, \
CONFIG_PLL##pll_id##_MUL)
#define pll_config_defaults(cfg, pll_id) \
pll_config_init(cfg, \
CONFIG_PLL##pll_id##_SOURCE, \
CONFIG_PLL##pll_id##_DIV, \
CONFIG_PLL##pll_id##_MUL)
static inline void pll_config_read(struct pll_config *p_cfg, uint32_t ul_pll_id)
{
Assert(ul_pll_id < NR_PLLS);
if (ul_pll_id == PLLA_ID) {
p_cfg->ctrl = PMC->CKGR_PLLAR;
} else {
p_cfg->ctrl = PMC->CKGR_UCKR;
}
static inline void pll_config_read(struct pll_config *p_cfg, uint32_t ul_pll_id) {
Assert(ul_pll_id < NR_PLLS);
p_cfg->ctrl = ul_pll_id == PLLA_ID ? PMC->CKGR_PLLAR : PMC->CKGR_UCKR;
}
static inline void pll_config_write(const struct pll_config *p_cfg, uint32_t ul_pll_id)
{
Assert(ul_pll_id < NR_PLLS);
static inline void pll_config_write(const struct pll_config *p_cfg, uint32_t ul_pll_id) {
Assert(ul_pll_id < NR_PLLS);
if (ul_pll_id == PLLA_ID) {
pmc_disable_pllack(); // Always stop PLL first!
PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
} else {
PMC->CKGR_UCKR = p_cfg->ctrl;
}
if (ul_pll_id == PLLA_ID) {
pmc_disable_pllack(); // Always stop PLL first!
PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
}
else
PMC->CKGR_UCKR = p_cfg->ctrl;
}
static inline void pll_enable(const struct pll_config *p_cfg, uint32_t ul_pll_id)
{
Assert(ul_pll_id < NR_PLLS);
static inline void pll_enable(const struct pll_config *p_cfg, uint32_t ul_pll_id) {
Assert(ul_pll_id < NR_PLLS);
if (ul_pll_id == PLLA_ID) {
pmc_disable_pllack(); // Always stop PLL first!
PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
} else {
PMC->CKGR_UCKR = p_cfg->ctrl | CKGR_UCKR_UPLLEN;
}
if (ul_pll_id == PLLA_ID) {
pmc_disable_pllack(); // Always stop PLL first!
PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
}
else
PMC->CKGR_UCKR = p_cfg->ctrl | CKGR_UCKR_UPLLEN;
}
/**
* \note This will only disable the selected PLL, not the underlying oscillator (mainck).
*/
static inline void pll_disable(uint32_t ul_pll_id)
{
Assert(ul_pll_id < NR_PLLS);
static inline void pll_disable(uint32_t ul_pll_id) {
Assert(ul_pll_id < NR_PLLS);
if (ul_pll_id == PLLA_ID) {
pmc_disable_pllack();
} else {
PMC->CKGR_UCKR &= ~CKGR_UCKR_UPLLEN;
}
if (ul_pll_id == PLLA_ID)
pmc_disable_pllack();
else
PMC->CKGR_UCKR &= ~CKGR_UCKR_UPLLEN;
}
static inline uint32_t pll_is_locked(uint32_t ul_pll_id)
{
Assert(ul_pll_id < NR_PLLS);
static inline uint32_t pll_is_locked(uint32_t ul_pll_id) {
Assert(ul_pll_id < NR_PLLS);
if (ul_pll_id == PLLA_ID) {
return pmc_is_locked_pllack();
} else {
return pmc_is_locked_upll();
}
if (ul_pll_id == PLLA_ID)
return pmc_is_locked_pllack();
else
return pmc_is_locked_upll();
}
static inline void pll_enable_source(enum pll_source e_src)
{
switch (e_src) {
case PLL_SRC_MAINCK_4M_RC:
case PLL_SRC_MAINCK_8M_RC:
case PLL_SRC_MAINCK_12M_RC:
case PLL_SRC_MAINCK_XTAL:
case PLL_SRC_MAINCK_BYPASS:
osc_enable(e_src);
osc_wait_ready(e_src);
break;
static inline void pll_enable_source(enum pll_source e_src) {
switch (e_src) {
case PLL_SRC_MAINCK_4M_RC:
case PLL_SRC_MAINCK_8M_RC:
case PLL_SRC_MAINCK_12M_RC:
case PLL_SRC_MAINCK_XTAL:
case PLL_SRC_MAINCK_BYPASS:
osc_enable(e_src);
osc_wait_ready(e_src);
break;
default:
Assert(false);
break;
}
default:
Assert(false);
break;
}
}
static inline void pll_enable_config_defaults(unsigned int ul_pll_id)
{
struct pll_config pllcfg;
static inline void pll_enable_config_defaults(unsigned int ul_pll_id) {
struct pll_config pllcfg;
if (pll_is_locked(ul_pll_id)) {
return; // Pll already running
}
switch (ul_pll_id) {
#ifdef CONFIG_PLL0_SOURCE
case 0:
pll_enable_source(CONFIG_PLL0_SOURCE);
pll_config_init(&pllcfg,
CONFIG_PLL0_SOURCE,
CONFIG_PLL0_DIV,
CONFIG_PLL0_MUL);
break;
#endif
#ifdef CONFIG_PLL1_SOURCE
case 1:
pll_enable_source(CONFIG_PLL1_SOURCE);
pll_config_init(&pllcfg,
CONFIG_PLL1_SOURCE,
CONFIG_PLL1_DIV,
CONFIG_PLL1_MUL);
break;
#endif
default:
Assert(false);
break;
}
pll_enable(&pllcfg, ul_pll_id);
while (!pll_is_locked(ul_pll_id));
if (pll_is_locked(ul_pll_id)) return; // Pll already running
switch (ul_pll_id) {
#ifdef CONFIG_PLL0_SOURCE
case 0:
pll_enable_source(CONFIG_PLL0_SOURCE);
pll_config_init(&pllcfg,
CONFIG_PLL0_SOURCE,
CONFIG_PLL0_DIV,
CONFIG_PLL0_MUL);
break;
#endif
#ifdef CONFIG_PLL1_SOURCE
case 1:
pll_enable_source(CONFIG_PLL1_SOURCE);
pll_config_init(&pllcfg,
CONFIG_PLL1_SOURCE,
CONFIG_PLL1_DIV,
CONFIG_PLL1_MUL);
break;
#endif
default:
Assert(false);
break;
}
pll_enable(&pllcfg, ul_pll_id);
while (!pll_is_locked(ul_pll_id));
}
/**
@ -264,15 +249,12 @@ static inline void pll_enable_config_defaults(unsigned int ul_pll_id)
* \retval STATUS_OK The PLL is now locked.
* \retval ERR_TIMEOUT Timed out waiting for PLL to become locked.
*/
static inline int pll_wait_for_lock(unsigned int pll_id)
{
Assert(pll_id < NR_PLLS);
static inline int pll_wait_for_lock(unsigned int pll_id) {
Assert(pll_id < NR_PLLS);
while (!pll_is_locked(pll_id)) {
/* Do nothing */
}
while (!pll_is_locked(pll_id)) { /* Do nothing */ }
return 0;
return 0;
}
//! @}

111
Marlin/src/HAL/DUE/usb/sbc_protocol.h
View file

@ -57,7 +57,6 @@
#ifndef _SBC_PROTOCOL_H_
#define _SBC_PROTOCOL_H_
/**
* \ingroup usb_msc_protocol
* \defgroup usb_sbc_protocol SCSI Block Commands protocol definitions
@ -81,82 +80,82 @@
//@{
enum scsi_sbc_mode {
SCSI_MS_MODE_RW_ERR_RECOV = 0x01, //!< Read-Write Error Recovery mode page
SCSI_MS_MODE_FORMAT_DEVICE = 0x03, //!< Format Device mode page
SCSI_MS_MODE_FLEXIBLE_DISK = 0x05, //!< Flexible Disk mode page
SCSI_MS_MODE_CACHING = 0x08, //!< Caching mode page
SCSI_MS_MODE_RW_ERR_RECOV = 0x01, //!< Read-Write Error Recovery mode page
SCSI_MS_MODE_FORMAT_DEVICE = 0x03, //!< Format Device mode page
SCSI_MS_MODE_FLEXIBLE_DISK = 0x05, //!< Flexible Disk mode page
SCSI_MS_MODE_CACHING = 0x08, //!< Caching mode page
};
//! \name SBC-2 Device-Specific Parameter
//@{
#define SCSI_MS_SBC_WP 0x80 //!< Write Protected
#define SCSI_MS_SBC_DPOFUA 0x10 //!< DPO and FUA supported
#define SCSI_MS_SBC_WP 0x80 //!< Write Protected
#define SCSI_MS_SBC_DPOFUA 0x10 //!< DPO and FUA supported
//@}
/**
* \brief SBC-2 Short LBA mode parameter block descriptor
*/
struct sbc_slba_block_desc {
be32_t nr_blocks; //!< Number of Blocks
be32_t block_len; //!< Block Length
#define SBC_SLBA_BLOCK_LEN_MASK 0x00FFFFFFU //!< Mask reserved bits
be32_t nr_blocks; //!< Number of Blocks
be32_t block_len; //!< Block Length
#define SBC_SLBA_BLOCK_LEN_MASK 0x00FFFFFFU //!< Mask reserved bits
};
/**
* \brief SBC-2 Caching mode page
*/
struct sbc_caching_mode_page {
uint8_t page_code;
uint8_t page_length;
uint8_t flags2;
#define SBC_MP_CACHE_IC (1 << 7) //!< Initiator Control
#define SBC_MP_CACHE_ABPF (1 << 6) //!< Abort Pre-Fetch
#define SBC_MP_CACHE_CAP (1 << 5) //!< Catching Analysis Permitted
#define SBC_MP_CACHE_DISC (1 << 4) //!< Discontinuity
#define SBC_MP_CACHE_SIZE (1 << 3) //!< Size enable
#define SBC_MP_CACHE_WCE (1 << 2) //!< Write back Cache Enable
#define SBC_MP_CACHE_MF (1 << 1) //!< Multiplication Factor
#define SBC_MP_CACHE_RCD (1 << 0) //!< Read Cache Disable
uint8_t retention;
be16_t dis_pf_transfer_len;
be16_t min_prefetch;
be16_t max_prefetch;
be16_t max_prefetch_ceil;
uint8_t flags12;
#define SBC_MP_CACHE_FSW (1 << 7) //!< Force Sequential Write
#define SBC_MP_CACHE_LBCSS (1 << 6) //!< Logical Blk Cache Seg Sz
#define SBC_MP_CACHE_DRA (1 << 5) //!< Disable Read-Ahead
#define SBC_MP_CACHE_NV_DIS (1 << 0) //!< Non-Volatile Cache Disable
uint8_t nr_cache_segments;
be16_t cache_segment_size;
uint8_t reserved[4];
uint8_t page_code;
uint8_t page_length;
uint8_t flags2;
#define SBC_MP_CACHE_IC (1 << 7) //!< Initiator Control
#define SBC_MP_CACHE_ABPF (1 << 6) //!< Abort Pre-Fetch
#define SBC_MP_CACHE_CAP (1 << 5) //!< Catching Analysis Permitted
#define SBC_MP_CACHE_DISC (1 << 4) //!< Discontinuity
#define SBC_MP_CACHE_SIZE (1 << 3) //!< Size enable
#define SBC_MP_CACHE_WCE (1 << 2) //!< Write back Cache Enable
#define SBC_MP_CACHE_MF (1 << 1) //!< Multiplication Factor
#define SBC_MP_CACHE_RCD (1 << 0) //!< Read Cache Disable
uint8_t retention;
be16_t dis_pf_transfer_len;
be16_t min_prefetch;
be16_t max_prefetch;
be16_t max_prefetch_ceil;
uint8_t flags12;
#define SBC_MP_CACHE_FSW (1 << 7) //!< Force Sequential Write
#define SBC_MP_CACHE_LBCSS (1 << 6) //!< Logical Blk Cache Seg Sz
#define SBC_MP_CACHE_DRA (1 << 5) //!< Disable Read-Ahead
#define SBC_MP_CACHE_NV_DIS (1 << 0) //!< Non-Volatile Cache Disable
uint8_t nr_cache_segments;
be16_t cache_segment_size;
uint8_t reserved[4];
};
/**
* \brief SBC-2 Read-Write Error Recovery mode page
*/
struct sbc_rdwr_error_recovery_mode_page {
uint8_t page_code;
uint8_t page_length;
#define SPC_MP_RW_ERR_RECOV_PAGE_LENGTH 0x0A
uint8_t flags1;
#define SBC_MP_RW_ERR_RECOV_AWRE (1 << 7)
#define SBC_MP_RW_ERR_RECOV_ARRE (1 << 6)
#define SBC_MP_RW_ERR_RECOV_TB (1 << 5)
#define SBC_MP_RW_ERR_RECOV_RC (1 << 4)
#define SBC_MP_RW_ERR_RECOV_ERR (1 << 3)
#define SBC_MP_RW_ERR_RECOV_PER (1 << 2)
#define SBC_MP_RW_ERR_RECOV_DTE (1 << 1)
#define SBC_MP_RW_ERR_RECOV_DCR (1 << 0)
uint8_t read_retry_count;
uint8_t correction_span;
uint8_t head_offset_count;
uint8_t data_strobe_offset_count;
uint8_t flags2;
uint8_t write_retry_count;
uint8_t flags3;
be16_t recovery_time_limit;
uint8_t page_code;
uint8_t page_length;
#define SPC_MP_RW_ERR_RECOV_PAGE_LENGTH 0x0A
uint8_t flags1;
#define SBC_MP_RW_ERR_RECOV_AWRE (1 << 7)
#define SBC_MP_RW_ERR_RECOV_ARRE (1 << 6)
#define SBC_MP_RW_ERR_RECOV_TB (1 << 5)
#define SBC_MP_RW_ERR_RECOV_RC (1 << 4)
#define SBC_MP_RW_ERR_RECOV_ERR (1 << 3)
#define SBC_MP_RW_ERR_RECOV_PER (1 << 2)
#define SBC_MP_RW_ERR_RECOV_DTE (1 << 1)
#define SBC_MP_RW_ERR_RECOV_DCR (1 << 0)
uint8_t read_retry_count;
uint8_t correction_span;
uint8_t head_offset_count;
uint8_t data_strobe_offset_count;
uint8_t flags2;
uint8_t write_retry_count;
uint8_t flags3;
be16_t recovery_time_limit;
};
//@}
@ -164,8 +163,8 @@ struct sbc_rdwr_error_recovery_mode_page {
* \brief SBC-2 READ CAPACITY (10) parameter data
*/
struct sbc_read_capacity10_data {
be32_t max_lba; //!< LBA of last logical block
be32_t block_len; //!< Number of bytes in the last logical block
be32_t max_lba; //!< LBA of last logical block
be32_t block_len; //!< Number of bytes in the last logical block
};
//@}

339
Marlin/src/HAL/DUE/usb/spc_protocol.h
View file

@ -59,23 +59,23 @@
//! \name SCSI commands defined by SPC-2
//@{
#define SPC_TEST_UNIT_READY 0x00
#define SPC_REQUEST_SENSE 0x03
#define SPC_INQUIRY 0x12
#define SPC_MODE_SELECT6 0x15
#define SPC_MODE_SENSE6 0x1A
#define SPC_SEND_DIAGNOSTIC 0x1D
#define SPC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
#define SPC_MODE_SENSE10 0x5A
#define SPC_REPORT_LUNS 0xA0
#define SPC_TEST_UNIT_READY 0x00
#define SPC_REQUEST_SENSE 0x03
#define SPC_INQUIRY 0x12
#define SPC_MODE_SELECT6 0x15
#define SPC_MODE_SENSE6 0x1A
#define SPC_SEND_DIAGNOSTIC 0x1D
#define SPC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
#define SPC_MODE_SENSE10 0x5A
#define SPC_REPORT_LUNS 0xA0
//@}
//! \brief May be set in byte 0 of the INQUIRY CDB
//@{
//! Enable Vital Product Data
#define SCSI_INQ_REQ_EVPD 0x01
#define SCSI_INQ_REQ_EVPD 0x01
//! Command Support Data specified by the PAGE OR OPERATION CODE field
#define SCSI_INQ_REQ_CMDT 0x02
#define SCSI_INQ_REQ_CMDT 0x02
//@}
COMPILER_PACK_SET(1)
@ -84,110 +84,110 @@ COMPILER_PACK_SET(1)
* \brief SCSI Standard Inquiry data structure
*/
struct scsi_inquiry_data {
uint8_t pq_pdt; //!< Peripheral Qual / Peripheral Dev Type
#define SCSI_INQ_PQ_CONNECTED 0x00 //!< Peripheral connected
#define SCSI_INQ_PQ_NOT_CONN 0x20 //!< Peripheral not connected
#define SCSI_INQ_PQ_NOT_SUPP 0x60 //!< Peripheral not supported
#define SCSI_INQ_DT_DIR_ACCESS 0x00 //!< Direct Access (SBC)
#define SCSI_INQ_DT_SEQ_ACCESS 0x01 //!< Sequential Access
#define SCSI_INQ_DT_PRINTER 0x02 //!< Printer
#define SCSI_INQ_DT_PROCESSOR 0x03 //!< Processor device
#define SCSI_INQ_DT_WRITE_ONCE 0x04 //!< Write-once device
#define SCSI_INQ_DT_CD_DVD 0x05 //!< CD/DVD device
#define SCSI_INQ_DT_OPTICAL 0x07 //!< Optical Memory
#define SCSI_INQ_DT_MC 0x08 //!< Medium Changer
#define SCSI_INQ_DT_ARRAY 0x0C //!< Storage Array Controller
#define SCSI_INQ_DT_ENCLOSURE 0x0D //!< Enclosure Services
#define SCSI_INQ_DT_RBC 0x0E //!< Simplified Direct Access
#define SCSI_INQ_DT_OCRW 0x0F //!< Optical card reader/writer
#define SCSI_INQ_DT_BCC 0x10 //!< Bridge Controller Commands
#define SCSI_INQ_DT_OSD 0x11 //!< Object-based Storage
#define SCSI_INQ_DT_NONE 0x1F //!< No Peripheral
uint8_t flags1; //!< Flags (byte 1)
#define SCSI_INQ_RMB 0x80 //!< Removable Medium
uint8_t version; //!< Version
#define SCSI_INQ_VER_NONE 0x00 //!< No standards conformance
#define SCSI_INQ_VER_SPC 0x03 //!< SCSI Primary Commands (link to SBC)
#define SCSI_INQ_VER_SPC2 0x04 //!< SCSI Primary Commands - 2 (link to SBC-2)
#define SCSI_INQ_VER_SPC3 0x05 //!< SCSI Primary Commands - 3 (link to SBC-2)
#define SCSI_INQ_VER_SPC4 0x06 //!< SCSI Primary Commands - 4 (link to SBC-3)
uint8_t flags3; //!< Flags (byte 3)
#define SCSI_INQ_NORMACA 0x20 //!< Normal ACA Supported
#define SCSI_INQ_HISUP 0x10 //!< Hierarchal LUN addressing
#define SCSI_INQ_RSP_SPC2 0x02 //!< SPC-2 / SPC-3 response format
uint8_t addl_len; //!< Additional Length (n-4)
#define SCSI_INQ_ADDL_LEN(tot) ((tot)-5) //!< Total length is \a tot
uint8_t flags5; //!< Flags (byte 5)
#define SCSI_INQ_SCCS 0x80
uint8_t flags6; //!< Flags (byte 6)
#define SCSI_INQ_BQUE 0x80
#define SCSI_INQ_ENCSERV 0x40
#define SCSI_INQ_MULTIP 0x10
#define SCSI_INQ_MCHGR 0x08
#define SCSI_INQ_ADDR16 0x01
uint8_t flags7; //!< Flags (byte 7)
#define SCSI_INQ_WBUS16 0x20
#define SCSI_INQ_SYNC 0x10
#define SCSI_INQ_LINKED 0x08
#define SCSI_INQ_CMDQUE 0x02
uint8_t vendor_id[8]; //!< T10 Vendor Identification
uint8_t product_id[16]; //!< Product Identification
uint8_t product_rev[4]; //!< Product Revision Level
uint8_t pq_pdt; //!< Peripheral Qual / Peripheral Dev Type
#define SCSI_INQ_PQ_CONNECTED 0x00 //!< Peripheral connected
#define SCSI_INQ_PQ_NOT_CONN 0x20 //!< Peripheral not connected
#define SCSI_INQ_PQ_NOT_SUPP 0x60 //!< Peripheral not supported
#define SCSI_INQ_DT_DIR_ACCESS 0x00 //!< Direct Access (SBC)
#define SCSI_INQ_DT_SEQ_ACCESS 0x01 //!< Sequential Access
#define SCSI_INQ_DT_PRINTER 0x02 //!< Printer
#define SCSI_INQ_DT_PROCESSOR 0x03 //!< Processor device
#define SCSI_INQ_DT_WRITE_ONCE 0x04 //!< Write-once device
#define SCSI_INQ_DT_CD_DVD 0x05 //!< CD/DVD device
#define SCSI_INQ_DT_OPTICAL 0x07 //!< Optical Memory
#define SCSI_INQ_DT_MC 0x08 //!< Medium Changer
#define SCSI_INQ_DT_ARRAY 0x0C //!< Storage Array Controller
#define SCSI_INQ_DT_ENCLOSURE 0x0D //!< Enclosure Services
#define SCSI_INQ_DT_RBC 0x0E //!< Simplified Direct Access
#define SCSI_INQ_DT_OCRW 0x0F //!< Optical card reader/writer
#define SCSI_INQ_DT_BCC 0x10 //!< Bridge Controller Commands
#define SCSI_INQ_DT_OSD 0x11 //!< Object-based Storage
#define SCSI_INQ_DT_NONE 0x1F //!< No Peripheral
uint8_t flags1; //!< Flags (byte 1)
#define SCSI_INQ_RMB 0x80 //!< Removable Medium
uint8_t version; //!< Version
#define SCSI_INQ_VER_NONE 0x00 //!< No standards conformance
#define SCSI_INQ_VER_SPC 0x03 //!< SCSI Primary Commands (link to SBC)
#define SCSI_INQ_VER_SPC2 0x04 //!< SCSI Primary Commands - 2 (link to SBC-2)
#define SCSI_INQ_VER_SPC3 0x05 //!< SCSI Primary Commands - 3 (link to SBC-2)
#define SCSI_INQ_VER_SPC4 0x06 //!< SCSI Primary Commands - 4 (link to SBC-3)
uint8_t flags3; //!< Flags (byte 3)
#define SCSI_INQ_NORMACA 0x20 //!< Normal ACA Supported
#define SCSI_INQ_HISUP 0x10 //!< Hierarchal LUN addressing
#define SCSI_INQ_RSP_SPC2 0x02 //!< SPC-2 / SPC-3 response format
uint8_t addl_len; //!< Additional Length (n-4)
#define SCSI_INQ_ADDL_LEN(tot) ((tot)-5) //!< Total length is \a tot
uint8_t flags5; //!< Flags (byte 5)
#define SCSI_INQ_SCCS 0x80
uint8_t flags6; //!< Flags (byte 6)
#define SCSI_INQ_BQUE 0x80
#define SCSI_INQ_ENCSERV 0x40
#define SCSI_INQ_MULTIP 0x10
#define SCSI_INQ_MCHGR 0x08
#define SCSI_INQ_ADDR16 0x01
uint8_t flags7; //!< Flags (byte 7)
#define SCSI_INQ_WBUS16 0x20
#define SCSI_INQ_SYNC 0x10
#define SCSI_INQ_LINKED 0x08
#define SCSI_INQ_CMDQUE 0x02
uint8_t vendor_id[8]; //!< T10 Vendor Identification
uint8_t product_id[16]; //!< Product Identification
uint8_t product_rev[4]; //!< Product Revision Level
};
/**
* \brief SCSI Standard Request sense data structure
*/
struct scsi_request_sense_data {
/* 1st byte: REQUEST SENSE response flags*/
uint8_t valid_reponse_code;
#define SCSI_SENSE_VALID 0x80 //!< Indicates the INFORMATION field contains valid information
#define SCSI_SENSE_RESPONSE_CODE_MASK 0x7F
#define SCSI_SENSE_CURRENT 0x70 //!< Response code 70h (current errors)
#define SCSI_SENSE_DEFERRED 0x71
/* 1st byte: REQUEST SENSE response flags*/
uint8_t valid_reponse_code;
#define SCSI_SENSE_VALID 0x80 //!< Indicates the INFORMATION field contains valid information
#define SCSI_SENSE_RESPONSE_CODE_MASK 0x7F
#define SCSI_SENSE_CURRENT 0x70 //!< Response code 70h (current errors)
#define SCSI_SENSE_DEFERRED 0x71
/* 2nd byte */
uint8_t obsolete;
/* 2nd byte */
uint8_t obsolete;
/* 3rd byte */
uint8_t sense_flag_key;
#define SCSI_SENSE_FILEMARK 0x80 //!< Indicates that the current command has read a filemark or setmark.
#define SCSI_SENSE_EOM 0x40 //!< Indicates that an end-of-medium condition exists.
#define SCSI_SENSE_ILI 0x20 //!< Indicates that the requested logical block length did not match the logical block length of the data on the medium.
#define SCSI_SENSE_RESERVED 0x10 //!< Reserved
#define SCSI_SENSE_KEY(x) (x&0x0F) //!< Sense Key
/* 3rd byte */
uint8_t sense_flag_key;
#define SCSI_SENSE_FILEMARK 0x80 //!< Indicates that the current command has read a filemark or setmark.
#define SCSI_SENSE_EOM 0x40 //!< Indicates that an end-of-medium condition exists.
#define SCSI_SENSE_ILI 0x20 //!< Indicates that the requested logical block length did not match the logical block length of the data on the medium.
#define SCSI_SENSE_RESERVED 0x10 //!< Reserved
#define SCSI_SENSE_KEY(x) (x&0x0F) //!< Sense Key
/* 4th to 7th bytes - INFORMATION field */
uint8_t information[4];
/* 4th to 7th bytes - INFORMATION field */
uint8_t information[4];
/* 8th byte - ADDITIONAL SENSE LENGTH field */
uint8_t AddSenseLen;
#define SCSI_SENSE_ADDL_LEN(total_len) ((total_len) - 8)
/* 8th byte - ADDITIONAL SENSE LENGTH field */
uint8_t AddSenseLen;
#define SCSI_SENSE_ADDL_LEN(total_len) ((total_len) - 8)
/* 9th to 12th byte - COMMAND-SPECIFIC INFORMATION field */
uint8_t CmdSpecINFO[4];
/* 9th to 12th byte - COMMAND-SPECIFIC INFORMATION field */
uint8_t CmdSpecINFO[4];
/* 13th byte - ADDITIONAL SENSE CODE field */
uint8_t AddSenseCode;
/* 13th byte - ADDITIONAL SENSE CODE field */
uint8_t AddSenseCode;
/* 14th byte - ADDITIONAL SENSE CODE QUALIFIER field */
uint8_t AddSnsCodeQlfr;
/* 14th byte - ADDITIONAL SENSE CODE QUALIFIER field */
uint8_t AddSnsCodeQlfr;
/* 15th byte - FIELD REPLACEABLE UNIT CODE field */
uint8_t FldReplUnitCode;
/* 15th byte - FIELD REPLACEABLE UNIT CODE field */
uint8_t FldReplUnitCode;
/* 16th byte */
uint8_t SenseKeySpec[3];
#define SCSI_SENSE_SKSV 0x80 //!< Indicates the SENSE-KEY SPECIFIC field contains valid information
/* 16th byte */
uint8_t SenseKeySpec[3];
#define SCSI_SENSE_SKSV 0x80 //!< Indicates the SENSE-KEY SPECIFIC field contains valid information
};
COMPILER_PACK_RESET()
/* Vital Product Data page codes */
enum scsi_vpd_page_code {
SCSI_VPD_SUPPORTED_PAGES = 0x00,
SCSI_VPD_UNIT_SERIAL_NUMBER = 0x80,
SCSI_VPD_DEVICE_IDENTIFICATION = 0x83,
SCSI_VPD_SUPPORTED_PAGES = 0x00,
SCSI_VPD_UNIT_SERIAL_NUMBER = 0x80,
SCSI_VPD_DEVICE_IDENTIFICATION = 0x83,
};
#define SCSI_VPD_HEADER_SIZE 4
@ -200,37 +200,36 @@ enum scsi_vpd_page_code {
#define SCSI_VPD_ID_TYPE_T10 1
/* Sense keys */
enum scsi_sense_key {
SCSI_SK_NO_SENSE = 0x0,
SCSI_SK_RECOVERED_ERROR = 0x1,
SCSI_SK_NOT_READY = 0x2,
SCSI_SK_MEDIUM_ERROR = 0x3,
SCSI_SK_HARDWARE_ERROR = 0x4,
SCSI_SK_ILLEGAL_REQUEST = 0x5,
SCSI_SK_UNIT_ATTENTION = 0x6,
SCSI_SK_DATA_PROTECT = 0x7,
SCSI_SK_BLANK_CHECK = 0x8,
SCSI_SK_VENDOR_SPECIFIC = 0x9,
SCSI_SK_COPY_ABORTED = 0xA,
SCSI_SK_ABORTED_COMMAND = 0xB,
SCSI_SK_VOLUME_OVERFLOW = 0xD,
SCSI_SK_MISCOMPARE = 0xE,
SCSI_SK_NO_SENSE = 0x0,
SCSI_SK_RECOVERED_ERROR = 0x1,
SCSI_SK_NOT_READY = 0x2,
SCSI_SK_MEDIUM_ERROR = 0x3,
SCSI_SK_HARDWARE_ERROR = 0x4,
SCSI_SK_ILLEGAL_REQUEST = 0x5,
SCSI_SK_UNIT_ATTENTION = 0x6,
SCSI_SK_DATA_PROTECT = 0x7,
SCSI_SK_BLANK_CHECK = 0x8,
SCSI_SK_VENDOR_SPECIFIC = 0x9,
SCSI_SK_COPY_ABORTED = 0xA,
SCSI_SK_ABORTED_COMMAND = 0xB,
SCSI_SK_VOLUME_OVERFLOW = 0xD,
SCSI_SK_MISCOMPARE = 0xE,
};
/* Additional Sense Code / Additional Sense Code Qualifier pairs */
enum scsi_asc_ascq {
SCSI_ASC_NO_ADDITIONAL_SENSE_INFO = 0x0000,
SCSI_ASC_LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405,
SCSI_ASC_WRITE_ERROR = 0x0C00,
SCSI_ASC_UNRECOVERED_READ_ERROR = 0x1100,
SCSI_ASC_INVALID_COMMAND_OPERATION_CODE = 0x2000,
SCSI_ASC_INVALID_FIELD_IN_CDB = 0x2400,
SCSI_ASC_WRITE_PROTECTED = 0x2700,
SCSI_ASC_NOT_READY_TO_READY_CHANGE = 0x2800,
SCSI_ASC_MEDIUM_NOT_PRESENT = 0x3A00,
SCSI_ASC_INTERNAL_TARGET_FAILURE = 0x4400,
SCSI_ASC_NO_ADDITIONAL_SENSE_INFO = 0x0000,
SCSI_ASC_LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405,
SCSI_ASC_WRITE_ERROR = 0x0C00,
SCSI_ASC_UNRECOVERED_READ_ERROR = 0x1100,
SCSI_ASC_INVALID_COMMAND_OPERATION_CODE = 0x2000,
SCSI_ASC_INVALID_FIELD_IN_CDB = 0x2400,
SCSI_ASC_WRITE_PROTECTED = 0x2700,
SCSI_ASC_NOT_READY_TO_READY_CHANGE = 0x2800,
SCSI_ASC_MEDIUM_NOT_PRESENT = 0x3A00,
SCSI_ASC_INTERNAL_TARGET_FAILURE = 0x4400,
};
/**
@ -240,9 +239,9 @@ enum scsi_asc_ascq {
* that are applicable to all SCSI devices.
*/
enum scsi_spc_mode {
SCSI_MS_MODE_VENDOR_SPEC = 0x00,
SCSI_MS_MODE_INFEXP = 0x1C, // Informational exceptions control page
SCSI_MS_MODE_ALL = 0x3F,
SCSI_MS_MODE_VENDOR_SPEC = 0x00,
SCSI_MS_MODE_INFEXP = 0x1C, // Informational exceptions control page
SCSI_MS_MODE_ALL = 0x3F,
};
/**
@ -250,51 +249,45 @@ enum scsi_spc_mode {
* See chapter 8.3.8
*/
struct spc_control_page_info_execpt {
uint8_t page_code;
uint8_t page_length;
#define SPC_MP_INFEXP_PAGE_LENGTH 0x0A
uint8_t flags1;
#define SPC_MP_INFEXP_PERF (1<<7) //!< Initiator Control
#define SPC_MP_INFEXP_EBF (1<<5) //!< Caching Analysis Permitted
#define SPC_MP_INFEXP_EWASC (1<<4) //!< Discontinuity
#define SPC_MP_INFEXP_DEXCPT (1<<3) //!< Size enable
#define SPC_MP_INFEXP_TEST (1<<2) //!< Writeback Cache Enable
#define SPC_MP_INFEXP_LOGERR (1<<0) //!< Log errors bit
uint8_t mrie;
#define SPC_MP_INFEXP_MRIE_NO_REPORT 0x00
#define SPC_MP_INFEXP_MRIE_ASYNC_EVENT 0x01
#define SPC_MP_INFEXP_MRIE_GEN_UNIT 0x02
#define SPC_MP_INFEXP_MRIE_COND_RECOV_ERROR 0x03
#define SPC_MP_INFEXP_MRIE_UNCOND_RECOV_ERROR 0x04
#define SPC_MP_INFEXP_MRIE_NO_SENSE 0x05
#define SPC_MP_INFEXP_MRIE_ONLY_REPORT 0x06
be32_t interval_timer;
be32_t report_count;
uint8_t page_code;
uint8_t page_length;
#define SPC_MP_INFEXP_PAGE_LENGTH 0x0A
uint8_t flags1;
#define SPC_MP_INFEXP_PERF (1<<7) //!< Initiator Control
#define SPC_MP_INFEXP_EBF (1<<5) //!< Caching Analysis Permitted
#define SPC_MP_INFEXP_EWASC (1<<4) //!< Discontinuity
#define SPC_MP_INFEXP_DEXCPT (1<<3) //!< Size enable
#define SPC_MP_INFEXP_TEST (1<<2) //!< Writeback Cache Enable
#define SPC_MP_INFEXP_LOGERR (1<<0) //!< Log errors bit
uint8_t mrie;
#define SPC_MP_INFEXP_MRIE_NO_REPORT 0x00
#define SPC_MP_INFEXP_MRIE_ASYNC_EVENT 0x01
#define SPC_MP_INFEXP_MRIE_GEN_UNIT 0x02
#define SPC_MP_INFEXP_MRIE_COND_RECOV_ERROR 0x03
#define SPC_MP_INFEXP_MRIE_UNCOND_RECOV_ERROR 0x04
#define SPC_MP_INFEXP_MRIE_NO_SENSE 0x05
#define SPC_MP_INFEXP_MRIE_ONLY_REPORT 0x06
be32_t interval_timer;
be32_t report_count;
};
enum scsi_spc_mode_sense_pc {
SCSI_MS_SENSE_PC_CURRENT = 0,
SCSI_MS_SENSE_PC_CHANGEABLE = 1,
SCSI_MS_SENSE_PC_DEFAULT = 2,
SCSI_MS_SENSE_PC_SAVED = 3,
SCSI_MS_SENSE_PC_CURRENT = 0,
SCSI_MS_SENSE_PC_CHANGEABLE = 1,
SCSI_MS_SENSE_PC_DEFAULT = 2,
SCSI_MS_SENSE_PC_SAVED = 3,
};
static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb)
{
return (cdb[1] >> 3) & 1;
static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb) {
return (cdb[1] >> 3) & 1;
}
static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb)
{
return cdb[2] & 0x3F;
static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb) {
return cdb[2] & 0x3F;
}
static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb)
{
return cdb[2] >> 6;
static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb) {
return cdb[2] >> 6;
}
/**
@ -302,10 +295,10 @@ static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb)
* SENSE(6)
*/
struct scsi_mode_param_header6 {
uint8_t mode_data_length; //!< Number of bytes after this
uint8_t medium_type; //!< Medium Type
uint8_t device_specific_parameter; //!< Defined by command set
uint8_t block_descriptor_length; //!< Length of block descriptors
uint8_t mode_data_length; //!< Number of bytes after this
uint8_t medium_type; //!< Medium Type
uint8_t device_specific_parameter; //!< Defined by command set
uint8_t block_descriptor_length; //!< Length of block descriptors
};
/**
@ -313,23 +306,23 @@ struct scsi_mode_param_header6 {
* SENSE(10)
*/
struct scsi_mode_param_header10 {
be16_t mode_data_length; //!< Number of bytes after this
uint8_t medium_type; //!< Medium Type
uint8_t device_specific_parameter; //!< Defined by command set
uint8_t flags4; //!< LONGLBA in bit 0
uint8_t reserved;
be16_t block_descriptor_length; //!< Length of block descriptors
be16_t mode_data_length; //!< Number of bytes after this
uint8_t medium_type; //!< Medium Type
uint8_t device_specific_parameter; //!< Defined by command set
uint8_t flags4; //!< LONGLBA in bit 0
uint8_t reserved;
be16_t block_descriptor_length; //!< Length of block descriptors
};
/**
* \brief SCSI Page_0 Mode Page header (SPF not set)
*/
struct scsi_mode_page_0_header {
uint8_t page_code;
#define SCSI_PAGE_CODE_PS (1 << 7) //!< Parameters Saveable
#define SCSI_PAGE_CODE_SPF (1 << 6) //!< SubPage Format
uint8_t page_length; //!< Number of bytes after this
#define SCSI_MS_PAGE_LEN(total) ((total) - 2)
uint8_t page_code;
#define SCSI_PAGE_CODE_PS (1 << 7) //!< Parameters Saveable
#define SCSI_PAGE_CODE_SPF (1 << 6) //!< SubPage Format
uint8_t page_length; //!< Number of bytes after this
#define SCSI_MS_PAGE_LEN(total) ((total) - 2)
};
//@}

30
Marlin/src/HAL/DUE/usb/sysclk.h
View file

@ -71,7 +71,7 @@
* \subsection sysclk_quickstart_use_case_1_setup_steps Initialization code
* Add to the application initialization code:
* \code
sysclk_init();
sysclk_init();
\endcode
*
* \subsection sysclk_quickstart_use_case_1_setup_steps_workflow Workflow
@ -82,15 +82,15 @@
* Add or uncomment the following in your conf_clock.h header file, commenting out all other
* definitions of the same symbol(s):
* \code
#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK
#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK
// Fpll0 = (Fclk * PLL_mul) / PLL_div
#define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL
#define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL)
#define CONFIG_PLL0_DIV 1
// Fpll0 = (Fclk * PLL_mul) / PLL_div
#define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL
#define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL)
#define CONFIG_PLL0_DIV 1
// Fbus = Fsys / BUS_div
#define CONFIG_SYSCLK_PRES SYSCLK_PRES_1
// Fbus = Fsys / BUS_div
#define CONFIG_SYSCLK_PRES SYSCLK_PRES_1
\endcode
*
* \subsection sysclk_quickstart_use_case_1_example_workflow Workflow
@ -100,14 +100,14 @@
* \code #define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL \endcode
* -# Configure the PLL module to multiply the external fast crystal oscillator frequency up to 84MHz:
* \code
#define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL)
#define CONFIG_PLL0_DIV 1
#define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL)
#define CONFIG_PLL0_DIV 1
\endcode
* \note For user boards, \c BOARD_FREQ_MAINCK_XTAL should be defined in the board \c conf_board.h configuration
* file as the frequency of the fast crystal attached to the microcontroller.
* -# Configure the main clock to run at the full 84MHz, disable scaling of the main system clock speed:
* \code
#define CONFIG_SYSCLK_PRES SYSCLK_PRES_1
#define CONFIG_SYSCLK_PRES SYSCLK_PRES_1
\endcode
* \note Some dividers are powers of two, while others are integer division factors. Refer to the
* formulas in the conf_clock.h template commented above each division define.
@ -136,7 +136,7 @@ extern "C" {
* initialization.
*/
#ifndef CONFIG_SYSCLK_SOURCE
# define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_4M_RC
#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_4M_RC
#endif
/**
* \def CONFIG_SYSCLK_PRES
@ -149,7 +149,7 @@ extern "C" {
* after initialization.
*/
#ifndef CONFIG_SYSCLK_PRES
# define CONFIG_SYSCLK_PRES 0
#define CONFIG_SYSCLK_PRES 0
#endif
//@}
@ -197,7 +197,7 @@ extern "C" {
* USB is not required.
*/
#ifdef __DOXYGEN__
# define CONFIG_USBCLK_SOURCE
#define CONFIG_USBCLK_SOURCE
#endif
/**
@ -209,7 +209,7 @@ extern "C" {
* defined.
*/
#ifdef __DOXYGEN__
# define CONFIG_USBCLK_DIV
#define CONFIG_USBCLK_DIV
#endif

401
Marlin/src/HAL/DUE/usb/udc.h
View file

@ -144,15 +144,15 @@ extern "C" {
* \code #define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode
* User C file contains:
* \code
// Authorize VBUS monitoring
if (!udc_include_vbus_monitoring()) {
// Implement custom VBUS monitoring via GPIO or other
}
Event_VBUS_present() // VBUS interrupt or GPIO interrupt or other
{
// Attach USB Device
udc_attach();
}
// Authorize VBUS monitoring
if (!udc_include_vbus_monitoring()) {
// Implement custom VBUS monitoring via GPIO or other
}
Event_VBUS_present() // VBUS interrupt or GPIO interrupt or other
{
// Attach USB Device
udc_attach();
}
\endcode
*
* - Case of battery charging. conf_usb.h file contains define
@ -160,21 +160,20 @@ extern "C" {
* \code #define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode
* User C file contains:
* \code
Event VBUS present() // VBUS interrupt or GPIO interrupt or ..
{
// Authorize battery charging, but wait key press to start USB.
}
Event Key press()
{
// Stop batteries charging
// Start USB
udc_attach();
}
Event VBUS present() // VBUS interrupt or GPIO interrupt or ..
{
// Authorize battery charging, but wait key press to start USB.
}
Event Key press()
{
// Stop batteries charging
// Start USB
udc_attach();
}
\endcode
*/
static inline bool udc_include_vbus_monitoring(void)
{
return udd_include_vbus_monitoring();
static inline bool udc_include_vbus_monitoring(void) {
return udd_include_vbus_monitoring();
}
/*! \brief Start the USB Device stack
@ -192,32 +191,26 @@ void udc_stop(void);
* then it will attach device when an acceptable Vbus
* level from the host is detected.
*/
static inline void udc_attach(void)
{
udd_attach();
static inline void udc_attach(void) {
udd_attach();
}
/**
* \brief Detaches the device from the bus
*
* The driver must remove pull-up on USB line D- or D+.
*/
static inline void udc_detach(void)
{
udd_detach();
static inline void udc_detach(void) {
udd_detach();
}
/*! \brief The USB driver sends a resume signal called \e "Upstream Resume"
* This is authorized only when the remote wakeup feature is enabled by host.
*/
static inline void udc_remotewakeup(void)
{
udd_send_remotewakeup();
static inline void udc_remotewakeup(void) {
udd_send_remotewakeup();
}
/**
* \brief Returns a pointer on the current interface descriptor
*
@ -296,23 +289,23 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
*
* for AVR and SAM3/4 devices, add to the initialization code:
* \code
sysclk_init();
irq_initialize_vectors();
cpu_irq_enable();
board_init();
sleepmgr_init(); // Optional
sysclk_init();
irq_initialize_vectors();
cpu_irq_enable();
board_init();
sleepmgr_init(); // Optional
\endcode
*
* For SAMD devices, add to the initialization code:
* \code
system_init();
irq_initialize_vectors();
cpu_irq_enable();
sleepmgr_init(); // Optional
system_init();
irq_initialize_vectors();
cpu_irq_enable();
sleepmgr_init(); // Optional
\endcode
* Add to the main IDLE loop:
* \code
sleepmgr_enter_sleep(); // Optional
sleepmgr_enter_sleep(); // Optional
\endcode
*
*/
@ -324,20 +317,20 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
*
* Content of conf_usb.h:
* \code
#define USB_DEVICE_VENDOR_ID 0x03EB
#define USB_DEVICE_PRODUCT_ID 0xXXXX
#define USB_DEVICE_MAJOR_VERSION 1
#define USB_DEVICE_MINOR_VERSION 0
#define USB_DEVICE_POWER 100
#define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED
#define USB_DEVICE_VENDOR_ID 0x03EB
#define USB_DEVICE_PRODUCT_ID 0xXXXX
#define USB_DEVICE_MAJOR_VERSION 1
#define USB_DEVICE_MINOR_VERSION 0
#define USB_DEVICE_POWER 100
#define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED
\endcode
*
* Add to application C-file:
* \code
void usb_init(void)
{
udc_start();
}
void usb_init(void)
{
udc_start();
}
\endcode
*/
@ -349,17 +342,17 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
* -# Ensure that conf_usb.h is available and contains the following configuration
* which is the main USB device configuration:
* - \code // Vendor ID provided by USB org (ATMEL 0x03EB)
#define USB_DEVICE_VENDOR_ID 0x03EB // Type Word
// Product ID (Atmel PID referenced in usb_atmel.h)
#define USB_DEVICE_PRODUCT_ID 0xXXXX // Type Word
// Major version of the device
#define USB_DEVICE_MAJOR_VERSION 1 // Type Byte
// Minor version of the device
#define USB_DEVICE_MINOR_VERSION 0 // Type Byte
// Maximum device power (mA)
#define USB_DEVICE_POWER 100 // Type 9-bits
// USB attributes to enable features
#define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED // Flags \endcode
#define USB_DEVICE_VENDOR_ID 0x03EB // Type Word
// Product ID (Atmel PID referenced in usb_atmel.h)
#define USB_DEVICE_PRODUCT_ID 0xXXXX // Type Word
// Major version of the device
#define USB_DEVICE_MAJOR_VERSION 1 // Type Byte
// Minor version of the device
#define USB_DEVICE_MINOR_VERSION 0 // Type Byte
// Maximum device power (mA)
#define USB_DEVICE_POWER 100 // Type 9-bits
// USB attributes to enable features
#define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED // Flags \endcode
* -# Call the USB device stack start function to enable stack and start USB:
* - \code udc_start(); \endcode
* \note In case of USB dual roles (Device and Host) managed through USB OTG connector
@ -372,90 +365,90 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
*
* Content of XMEGA conf_clock.h:
* \code
// Configuration based on internal RC:
// USB clock need of 48Mhz
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_RCOSC
#define CONFIG_OSC_RC32_CAL 48000000UL
#define CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC OSC_ID_USBSOF
// CPU clock need of clock > 12MHz to run with USB (Here 24MHz)
#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_RC32MHZ
#define CONFIG_SYSCLK_PSADIV SYSCLK_PSADIV_2
#define CONFIG_SYSCLK_PSBCDIV SYSCLK_PSBCDIV_1_1
// Configuration based on internal RC:
// USB clock need of 48Mhz
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_RCOSC
#define CONFIG_OSC_RC32_CAL 48000000UL
#define CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC OSC_ID_USBSOF
// CPU clock need of clock > 12MHz to run with USB (Here 24MHz)
#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_RC32MHZ
#define CONFIG_SYSCLK_PSADIV SYSCLK_PSADIV_2
#define CONFIG_SYSCLK_PSBCDIV SYSCLK_PSBCDIV_1_1
\endcode
*
* Content of conf_clock.h for AT32UC3A0, AT32UC3A1, AT32UC3B devices (USBB):
* \code
// Configuration based on 12MHz external OSC:
#define CONFIG_PLL1_SOURCE PLL_SRC_OSC0
#define CONFIG_PLL1_MUL 8
#define CONFIG_PLL1_DIV 2
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
#define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
// Configuration based on 12MHz external OSC:
#define CONFIG_PLL1_SOURCE PLL_SRC_OSC0
#define CONFIG_PLL1_MUL 8
#define CONFIG_PLL1_DIV 2
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
#define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
\endcode
*
* Content of conf_clock.h for AT32UC3A3, AT32UC3A4 devices (USBB with high speed support):
* \code
// Configuration based on 12MHz external OSC:
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_OSC0
#define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
// Configuration based on 12MHz external OSC:
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_OSC0
#define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
\endcode
*
* Content of conf_clock.h for AT32UC3C, ATUCXXD, ATUCXXL3U, ATUCXXL4U devices (USBC):
* \code
// Configuration based on 12MHz external OSC:
#define CONFIG_PLL1_SOURCE PLL_SRC_OSC0
#define CONFIG_PLL1_MUL 8
#define CONFIG_PLL1_DIV 2
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
#define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
// CPU clock need of clock > 25MHz to run with USBC
#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLL1
// Configuration based on 12MHz external OSC:
#define CONFIG_PLL1_SOURCE PLL_SRC_OSC0
#define CONFIG_PLL1_MUL 8
#define CONFIG_PLL1_DIV 2
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
#define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
// CPU clock need of clock > 25MHz to run with USBC
#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLL1
\endcode
*
* Content of conf_clock.h for SAM3S, SAM3SD, SAM4S devices (UPD: USB Peripheral Device):
* \code
// PLL1 (B) Options (Fpll = (Fclk * PLL_mul) / PLL_div)
#define CONFIG_PLL1_SOURCE PLL_SRC_MAINCK_XTAL
#define CONFIG_PLL1_MUL 16
#define CONFIG_PLL1_DIV 2
// USB Clock Source Options (Fusb = FpllX / USB_div)
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
#define CONFIG_USBCLK_DIV 2
// PLL1 (B) Options (Fpll = (Fclk * PLL_mul) / PLL_div)
#define CONFIG_PLL1_SOURCE PLL_SRC_MAINCK_XTAL
#define CONFIG_PLL1_MUL 16
#define CONFIG_PLL1_DIV 2
// USB Clock Source Options (Fusb = FpllX / USB_div)
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
#define CONFIG_USBCLK_DIV 2
\endcode
*
* Content of conf_clock.h for SAM3U device (UPDHS: USB Peripheral Device High Speed):
* \code
// USB Clock Source fixed at UPLL.
// USB Clock Source fixed at UPLL.
\endcode
*
* Content of conf_clock.h for SAM3X, SAM3A devices (UOTGHS: USB OTG High Speed):
* \code
// USB Clock Source fixed at UPLL.
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_UPLL
#define CONFIG_USBCLK_DIV 1
// USB Clock Source fixed at UPLL.
#define CONFIG_USBCLK_SOURCE USBCLK_SRC_UPLL
#define CONFIG_USBCLK_DIV 1
\endcode
*
* Content of conf_clocks.h for SAMD devices (USB):
* \code
// System clock bus configuration
# define CONF_CLOCK_FLASH_WAIT_STATES 2
// System clock bus configuration
# define CONF_CLOCK_FLASH_WAIT_STATES 2
// USB Clock Source fixed at DFLL.
// SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop
# define CONF_CLOCK_DFLL_ENABLE true
# define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_USB_RECOVERY
# define CONF_CLOCK_DFLL_ON_DEMAND true
// USB Clock Source fixed at DFLL.
// SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop
# define CONF_CLOCK_DFLL_ENABLE true
# define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_USB_RECOVERY
# define CONF_CLOCK_DFLL_ON_DEMAND true
// Set this to true to configure the GCLK when running clocks_init.
// If set to false, none of the GCLK generators will be configured in clocks_init().
# define CONF_CLOCK_CONFIGURE_GCLK true
// Set this to true to configure the GCLK when running clocks_init.
// If set to false, none of the GCLK generators will be configured in clocks_init().
# define CONF_CLOCK_CONFIGURE_GCLK true
// Configure GCLK generator 0 (Main Clock)
# define CONF_CLOCK_GCLK_0_ENABLE true
# define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY true
# define CONF_CLOCK_GCLK_0_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_DFLL
# define CONF_CLOCK_GCLK_0_PRESCALER 1
# define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE false
// Configure GCLK generator 0 (Main Clock)
# define CONF_CLOCK_GCLK_0_ENABLE true
# define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY true
# define CONF_CLOCK_GCLK_0_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_DFLL
# define CONF_CLOCK_GCLK_0_PRESCALER 1
# define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE false
\endcode
*/
@ -474,34 +467,34 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
* \subsection udc_use_case_1_usage_code Example code
* Content of conf_usb.h:
* \code
#if // Low speed
#define USB_DEVICE_LOW_SPEED
// #define USB_DEVICE_HS_SUPPORT
#if // Low speed
#define USB_DEVICE_LOW_SPEED
// #define USB_DEVICE_HS_SUPPORT
#elif // Full speed
// #define USB_DEVICE_LOW_SPEED
// #define USB_DEVICE_HS_SUPPORT
#elif // Full speed
// #define USB_DEVICE_LOW_SPEED
// #define USB_DEVICE_HS_SUPPORT
#elif // High speed
// #define USB_DEVICE_LOW_SPEED
#define USB_DEVICE_HS_SUPPORT
#elif // High speed
// #define USB_DEVICE_LOW_SPEED
#define USB_DEVICE_HS_SUPPORT
#endif
#endif
\endcode
*
* \subsection udc_use_case_1_usage_flow Workflow
* -# Ensure that conf_usb.h is available and contains the following parameters
* required for a USB device low speed (1.5Mbit/s):
* - \code #define USB_DEVICE_LOW_SPEED
//#define USB_DEVICE_HS_SUPPORT \endcode
//#define USB_DEVICE_HS_SUPPORT \endcode
* -# Ensure that conf_usb.h contains the following parameters
* required for a USB device full speed (12Mbit/s):
* - \code //#define USB_DEVICE_LOW_SPEED
//#define USB_DEVICE_HS_SUPPORT \endcode
//#define USB_DEVICE_HS_SUPPORT \endcode
* -# Ensure that conf_usb.h contains the following parameters
* required for a USB device high speed (480Mbit/s):
* - \code //#define USB_DEVICE_LOW_SPEED
#define USB_DEVICE_HS_SUPPORT \endcode
#define USB_DEVICE_HS_SUPPORT \endcode
*/
/**
@ -518,20 +511,20 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
* \subsection udc_use_case_2_usage_code Example code
* Content of conf_usb.h:
* \code
#define USB_DEVICE_MANUFACTURE_NAME "Manufacture name"
#define USB_DEVICE_PRODUCT_NAME "Product name"
#define USB_DEVICE_SERIAL_NAME "12...EF"
#define USB_DEVICE_MANUFACTURE_NAME "Manufacture name"
#define USB_DEVICE_PRODUCT_NAME "Product name"
#define USB_DEVICE_SERIAL_NAME "12...EF"
\endcode
*
* \subsection udc_use_case_2_usage_flow Workflow
* -# Ensure that conf_usb.h is available and contains the following parameters
* required to enable different USB strings:
* - \code // Static ASCII name for the manufacture
#define USB_DEVICE_MANUFACTURE_NAME "Manufacture name" \endcode
#define USB_DEVICE_MANUFACTURE_NAME "Manufacture name" \endcode
* - \code // Static ASCII name for the product
#define USB_DEVICE_PRODUCT_NAME "Product name" \endcode
#define USB_DEVICE_PRODUCT_NAME "Product name" \endcode
* - \code // Static ASCII name to enable and set a serial number
#define USB_DEVICE_SERIAL_NAME "12...EF" \endcode
#define USB_DEVICE_SERIAL_NAME "12...EF" \endcode
*/
/**
@ -548,42 +541,42 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
* \subsection udc_use_case_3_usage_code Example code
* Content of conf_usb.h:
* \code
#define USB_DEVICE_ATTR \
(USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED)
#define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable()
extern void my_callback_remotewakeup_enable(void);
#define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable()
extern void my_callback_remotewakeup_disable(void);
#define USB_DEVICE_ATTR \
(USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED)
#define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable()
extern void my_callback_remotewakeup_enable(void);
#define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable()
extern void my_callback_remotewakeup_disable(void);
\endcode
*
* Add to application C-file:
* \code
void my_callback_remotewakeup_enable(void)
{
// Enable application wakeup events (e.g. enable GPIO interrupt)
}
void my_callback_remotewakeup_disable(void)
{
// Disable application wakeup events (e.g. disable GPIO interrupt)
}
void my_callback_remotewakeup_enable(void)
{
// Enable application wakeup events (e.g. enable GPIO interrupt)
}
void my_callback_remotewakeup_disable(void)
{
// Disable application wakeup events (e.g. disable GPIO interrupt)
}
void my_interrupt_event(void)
{
udc_remotewakeup();
}
void my_interrupt_event(void)
{
udc_remotewakeup();
}
\endcode
*
* \subsection udc_use_case_3_usage_flow Workflow
* -# Ensure that conf_usb.h is available and contains the following parameters
* required to enable remote wakeup feature:
* - \code // Authorizes the remote wakeup feature
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED) \endcode
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED) \endcode
* - \code // Define callback called when the host enables the remotewakeup feature
#define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable()
extern void my_callback_remotewakeup_enable(void); \endcode
#define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable()
extern void my_callback_remotewakeup_enable(void); \endcode
* - \code // Define callback called when the host disables the remotewakeup feature
#define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable()
extern void my_callback_remotewakeup_disable(void); \endcode
#define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable()
extern void my_callback_remotewakeup_disable(void); \endcode
* -# Send a remote wakeup (USB upstream):
* - \code udc_remotewakeup(); \endcode
*/
@ -603,40 +596,40 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
* \subsection udc_use_case_5_usage_code Example code
* Content of conf_usb.h:
* \code
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED)
#define UDC_SUSPEND_EVENT() user_callback_suspend_action()
extern void user_callback_suspend_action(void)
#define UDC_RESUME_EVENT() user_callback_resume_action()
extern void user_callback_resume_action(void)
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED)
#define UDC_SUSPEND_EVENT() user_callback_suspend_action()
extern void user_callback_suspend_action(void)
#define UDC_RESUME_EVENT() user_callback_resume_action()
extern void user_callback_resume_action(void)
\endcode
*
* Add to application C-file:
* \code
void user_callback_suspend_action(void)
{
// Disable hardware component to reduce power consumption
}
void user_callback_resume_action(void)
{
// Re-enable hardware component
}
void user_callback_suspend_action(void)
{
// Disable hardware component to reduce power consumption
}
void user_callback_resume_action(void)
{
// Re-enable hardware component
}
\endcode
*
* \subsection udc_use_case_5_usage_flow Workflow
* -# Ensure that conf_usb.h is available and contains the following parameters:
* - \code // Authorizes the BUS power feature
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED) \endcode
#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED) \endcode
* - \code // Define callback called when the host suspend the USB line
#define UDC_SUSPEND_EVENT() user_callback_suspend_action()
extern void user_callback_suspend_action(void); \endcode
#define UDC_SUSPEND_EVENT() user_callback_suspend_action()
extern void user_callback_suspend_action(void); \endcode
* - \code // Define callback called when the host or device resume the USB line
#define UDC_RESUME_EVENT() user_callback_resume_action()
extern void user_callback_resume_action(void); \endcode
#define UDC_RESUME_EVENT() user_callback_resume_action()
extern void user_callback_resume_action(void); \endcode
* -# Reduce power consumption in suspend mode (max. 2.5mA on Vbus):
* - \code void user_callback_suspend_action(void)
{
turn_off_components();
} \endcode
{
turn_off_components();
} \endcode
*/
/**
@ -654,42 +647,42 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
* \subsection udc_use_case_6_usage_code Example code
* Content of conf_usb.h:
* \code
#define USB_DEVICE_SERIAL_NAME
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12
extern uint8_t serial_number[];
#define USB_DEVICE_SERIAL_NAME
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12
extern uint8_t serial_number[];
\endcode
*
* Add to application C-file:
* \code
uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
void init_build_usb_serial_number(void)
{
serial_number[0] = 'A';
serial_number[1] = 'B';
...
serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C';
} \endcode
void init_build_usb_serial_number(void)
{
serial_number[0] = 'A';
serial_number[1] = 'B';
...
serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C';
} \endcode
*
* \subsection udc_use_case_6_usage_flow Workflow
* -# Ensure that conf_usb.h is available and contains the following parameters
* required to enable a USB serial number strings dynamically:
* - \code #define USB_DEVICE_SERIAL_NAME // Define this empty
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number // Give serial array pointer
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12 // Give size of serial array
extern uint8_t serial_number[]; // Declare external serial array \endcode
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number // Give serial array pointer
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12 // Give size of serial array
extern uint8_t serial_number[]; // Declare external serial array \endcode
* -# Before start USB stack, initialize the serial array
* - \code
uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
void init_build_usb_serial_number(void)
{
serial_number[0] = 'A';
serial_number[1] = 'B';
...
serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C';
} \endcode
void init_build_usb_serial_number(void)
{
serial_number[0] = 'A';
serial_number[1] = 'B';
...
serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C';
} \endcode
*/

59
Marlin/src/HAL/DUE/usb/udc_desc.h
View file

@ -78,50 +78,47 @@ extern "C" {
* For Mega application used "code".
*/
#define UDC_DESC_STORAGE
// Descriptor storage in internal RAM
// Descriptor storage in internal RAM
#if (defined UDC_DATA_USE_HRAM_SUPPORT)
# if defined(__GNUC__)
# define UDC_DATA(x) COMPILER_WORD_ALIGNED __attribute__((__section__(".data_hram0")))
# define UDC_BSS(x) COMPILER_ALIGNED(x) __attribute__((__section__(".bss_hram0")))
# elif defined(__ICCAVR32__)
# define UDC_DATA(x) COMPILER_ALIGNED(x) __data32
# define UDC_BSS(x) COMPILER_ALIGNED(x) __data32
# endif
#else
# define UDC_DATA(x) COMPILER_ALIGNED(x)
# define UDC_BSS(x) COMPILER_ALIGNED(x)
#if defined(__GNUC__)
#define UDC_DATA(x) COMPILER_WORD_ALIGNED __attribute__((__section__(".data_hram0")))
#define UDC_BSS(x) COMPILER_ALIGNED(x) __attribute__((__section__(".bss_hram0")))
#elif defined(__ICCAVR32__)
#define UDC_DATA(x) COMPILER_ALIGNED(x) __data32
#define UDC_BSS(x) COMPILER_ALIGNED(x) __data32
#endif
#else
#define UDC_DATA(x) COMPILER_ALIGNED(x)
#define UDC_BSS(x) COMPILER_ALIGNED(x)
#endif
/**
* \brief Configuration descriptor and UDI link for one USB speed
*/
typedef struct {
//! USB configuration descriptor
usb_conf_desc_t UDC_DESC_STORAGE *desc;
//! Array of UDI API pointer
udi_api_t UDC_DESC_STORAGE *UDC_DESC_STORAGE * udi_apis;
//! USB configuration descriptor
usb_conf_desc_t UDC_DESC_STORAGE *desc;
//! Array of UDI API pointer
udi_api_t UDC_DESC_STORAGE *UDC_DESC_STORAGE * udi_apis;
} udc_config_speed_t;
/**
* \brief All information about the USB Device
*/
typedef struct {
//! USB device descriptor for low or full speed
usb_dev_desc_t UDC_DESC_STORAGE *confdev_lsfs;
//! USB configuration descriptor and UDI API pointers for low or full speed
udc_config_speed_t UDC_DESC_STORAGE *conf_lsfs;
#ifdef USB_DEVICE_HS_SUPPORT
//! USB device descriptor for high speed
usb_dev_desc_t UDC_DESC_STORAGE *confdev_hs;
//! USB device qualifier, only use in high speed mode
usb_dev_qual_desc_t UDC_DESC_STORAGE *qualifier;
//! USB configuration descriptor and UDI API pointers for high speed
udc_config_speed_t UDC_DESC_STORAGE *conf_hs;
#endif
usb_dev_bos_desc_t UDC_DESC_STORAGE *conf_bos;
//! USB device descriptor for low or full speed
usb_dev_desc_t UDC_DESC_STORAGE *confdev_lsfs;
//! USB configuration descriptor and UDI API pointers for low or full speed
udc_config_speed_t UDC_DESC_STORAGE *conf_lsfs;
#ifdef USB_DEVICE_HS_SUPPORT
//! USB device descriptor for high speed
usb_dev_desc_t UDC_DESC_STORAGE *confdev_hs;
//! USB device qualifier, only use in high speed mode
usb_dev_qual_desc_t UDC_DESC_STORAGE *qualifier;
//! USB configuration descriptor and UDI API pointers for high speed
udc_config_speed_t UDC_DESC_STORAGE *conf_hs;
#endif
usb_dev_bos_desc_t UDC_DESC_STORAGE *conf_bos;
} udc_config_t;
//! Global variables of USB Device Descriptor and UDI links

58
Marlin/src/HAL/DUE/usb/udd.h
View file

@ -71,8 +71,8 @@ typedef uint8_t udd_ep_id_t;
//! \brief Endpoint transfer status
//! Returned in parameters of callback register via udd_ep_run routine.
typedef enum {
UDD_EP_TRANSFER_OK = 0,
UDD_EP_TRANSFER_ABORT = 1,
UDD_EP_TRANSFER_OK = 0,
UDD_EP_TRANSFER_ABORT = 1,
} udd_ep_status_t;
/**
@ -82,41 +82,37 @@ typedef enum {
* It can be updated by udc_process_setup() from UDC or *setup() from UDIs.
*/
typedef struct {
//! Data received in USB SETUP packet
//! Note: The swap of "req.wValues" from uin16_t to le16_t is done by UDD.
usb_setup_req_t req;
//! Data received in USB SETUP packet
//! Note: The swap of "req.wValues" from uin16_t to le16_t is done by UDD.
usb_setup_req_t req;
//! Point to buffer to send or fill with data following SETUP packet
//! This buffer must be word align for DATA IN phase (use prefix COMPILER_WORD_ALIGNED for buffer)
uint8_t *payload;
//! Point to buffer to send or fill with data following SETUP packet
//! This buffer must be word align for DATA IN phase (use prefix COMPILER_WORD_ALIGNED for buffer)
uint8_t *payload;
//! Size of buffer to send or fill, and content the number of byte transferred
uint16_t payload_size;
//! Size of buffer to send or fill, and content the number of byte transferred
uint16_t payload_size;
//! Callback called after reception of ZLP from setup request
void (*callback)(void);
//! Callback called after reception of ZLP from setup request
void (*callback)(void);
//! Callback called when the buffer given (.payload) is full or empty.
//! This one return false to abort data transfer, or true with a new buffer in .payload.
bool (*over_under_run)(void);
//! Callback called when the buffer given (.payload) is full or empty.
//! This one return false to abort data transfer, or true with a new buffer in .payload.
bool (*over_under_run)(void);
} udd_ctrl_request_t;
extern udd_ctrl_request_t udd_g_ctrlreq;
//! Return true if the setup request \a udd_g_ctrlreq indicates IN data transfer
#define Udd_setup_is_in() \
(USB_REQ_DIR_IN == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
#define Udd_setup_is_in() (USB_REQ_DIR_IN == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
//! Return true if the setup request \a udd_g_ctrlreq indicates OUT data transfer
#define Udd_setup_is_out() \
(USB_REQ_DIR_OUT == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
#define Udd_setup_is_out() (USB_REQ_DIR_OUT == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
//! Return the type of the SETUP request \a udd_g_ctrlreq. \see usb_reqtype.
#define Udd_setup_type() \
(udd_g_ctrlreq.req.bmRequestType & USB_REQ_TYPE_MASK)
#define Udd_setup_type() (udd_g_ctrlreq.req.bmRequestType & USB_REQ_TYPE_MASK)
//! Return the recipient of the SETUP request \a udd_g_ctrlreq. \see usb_recipient
#define Udd_setup_recipient() \
(udd_g_ctrlreq.req.bmRequestType & USB_REQ_RECIP_MASK)
#define Udd_setup_recipient() (udd_g_ctrlreq.req.bmRequestType & USB_REQ_RECIP_MASK)
/**
* \brief End of halt callback function type.
@ -134,8 +130,7 @@ typedef void (*udd_callback_halt_cleared_t)(void);
* \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted
* \param n number of data transferred
*/
typedef void (*udd_callback_trans_t) (udd_ep_status_t status,
iram_size_t nb_transferred, udd_ep_id_t ep);
typedef void (*udd_callback_trans_t) (udd_ep_status_t status, iram_size_t nb_transferred, udd_ep_id_t ep);
/**
* \brief Authorizes the VBUS event
@ -239,8 +234,7 @@ void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );
*
* \return \c 1 if the endpoint is enabled, otherwise \c 0.
*/
bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
uint16_t MaxEndpointSize);
bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes, uint16_t MaxEndpointSize);
/**
* \brief Disables an endpoint
@ -294,8 +288,7 @@ bool udd_ep_clear_halt(udd_ep_id_t ep);
*
* \return \c 1 if the register is accepted, otherwise \c 0.
*/
bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
udd_callback_halt_cleared_t callback);
bool udd_ep_wait_stall_clear(udd_ep_id_t ep, udd_callback_halt_cleared_t callback);
/**
* \brief Allows to receive or send data on an endpoint
@ -321,9 +314,8 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
*
* \return \c 1 if function was successfully done, otherwise \c 0.
*/
bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
uint8_t * buf, iram_size_t buf_size,
udd_callback_trans_t callback);
bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket, uint8_t * buf, iram_size_t buf_size, udd_callback_trans_t callback);
/**
* \brief Aborts transfer on going on endpoint
*
@ -339,7 +331,6 @@ void udd_ep_abort(udd_ep_id_t ep);
//@}
/**
* \name High speed test mode management
*
@ -352,7 +343,6 @@ void udd_test_mode_se0_nak(void);
void udd_test_mode_packet(void);
//@}
/**
* \name UDC callbacks to provide for UDD
*

94
Marlin/src/HAL/DUE/usb/udi.h
View file

@ -72,57 +72,57 @@ extern "C" {
* selected by UDC.
*/
typedef struct {
/**
* \brief Enable the interface.
*
* This function is called when the host selects a configuration
* to which this interface belongs through a Set Configuration
* request, and when the host selects an alternate setting of
* this interface through a Set Interface request.
*
* \return \c 1 if function was successfully done, otherwise \c 0.
*/
bool (*enable)(void);
/**
* \brief Enable the interface.
*
* This function is called when the host selects a configuration
* to which this interface belongs through a Set Configuration
* request, and when the host selects an alternate setting of
* this interface through a Set Interface request.
*
* \return \c 1 if function was successfully done, otherwise \c 0.
*/
bool (*enable)(void);
/**
* \brief Disable the interface.
*
* This function is called when this interface is currently
* active, and
* - the host selects any configuration through a Set
* Configuration request, or
* - the host issues a USB reset, or
* - the device is detached from the host (i.e. Vbus is no
* longer present)
*/
void (*disable)(void);
/**
* \brief Disable the interface.
*
* This function is called when this interface is currently
* active, and
* - the host selects any configuration through a Set
* Configuration request, or
* - the host issues a USB reset, or
* - the device is detached from the host (i.e. Vbus is no
* longer present)
*/
void (*disable)(void);
/**
* \brief Handle a control request directed at an interface.
*
* This function is called when this interface is currently
* active and the host sends a SETUP request
* with this interface as the recipient.
*
* Use udd_g_ctrlreq to decode and response to SETUP request.
*
* \return \c 1 if this interface supports the SETUP request, otherwise \c 0.
*/
bool (*setup)(void);
/**
* \brief Handle a control request directed at an interface.
*
* This function is called when this interface is currently
* active and the host sends a SETUP request
* with this interface as the recipient.
*
* Use udd_g_ctrlreq to decode and response to SETUP request.
*
* \return \c 1 if this interface supports the SETUP request, otherwise \c 0.
*/
bool (*setup)(void);
/**
* \brief Returns the current setting of the selected interface.
*
* This function is called when UDC when know alternate setting of selected interface.
*
* \return alternate setting of selected interface
*/
uint8_t (*getsetting)(void);
/**
* \brief Returns the current setting of the selected interface.
*
* This function is called when UDC when know alternate setting of selected interface.
*
* \return alternate setting of selected interface
*/
uint8_t (*getsetting)(void);
/**
* \brief To signal that a SOF is occurred
*/
void (*sof_notify)(void);
/**
* \brief To signal that a SOF is occurred
*/
void (*sof_notify)(void);
} udi_api_t;
//@}

294
Marlin/src/HAL/DUE/usb/udi_cdc.h
View file

@ -92,18 +92,18 @@ extern UDC_DESC_STORAGE udi_api_t udi_api_cdc_data;
* descriptors for the CDC Communication Class interface.
*/
typedef struct {
//! Standard interface descriptor
usb_iface_desc_t iface;
//! CDC Header functional descriptor
usb_cdc_hdr_desc_t header;
//! CDC Abstract Control Model functional descriptor
usb_cdc_acm_desc_t acm;
//! CDC Union functional descriptor
usb_cdc_union_desc_t union_desc;
//! CDC Call Management functional descriptor
usb_cdc_call_mgmt_desc_t call_mgmt;
//! Notification endpoint descriptor
usb_ep_desc_t ep_notify;
//! Standard interface descriptor
usb_iface_desc_t iface;
//! CDC Header functional descriptor
usb_cdc_hdr_desc_t header;
//! CDC Abstract Control Model functional descriptor
usb_cdc_acm_desc_t acm;
//! CDC Union functional descriptor
usb_cdc_union_desc_t union_desc;
//! CDC Call Management functional descriptor
usb_cdc_call_mgmt_desc_t call_mgmt;
//! Notification endpoint descriptor
usb_ep_desc_t ep_notify;
} udi_cdc_comm_desc_t;
@ -114,11 +114,11 @@ typedef struct {
* CDC Data Class interface.
*/
typedef struct {
//! Standard interface descriptor
usb_iface_desc_t iface;
//! Data IN/OUT endpoint descriptors
usb_ep_desc_t ep_in;
usb_ep_desc_t ep_out;
//! Standard interface descriptor
usb_iface_desc_t iface;
//! Data IN/OUT endpoint descriptors
usb_ep_desc_t ep_in;
usb_ep_desc_t ep_out;
} udi_cdc_data_desc_t;
@ -136,13 +136,13 @@ typedef struct {
//@{
//! By default no string associated to these interfaces
#ifndef UDI_CDC_IAD_STRING_ID_0
#define UDI_CDC_IAD_STRING_ID_0 0
#define UDI_CDC_IAD_STRING_ID_0 0
#endif
#ifndef UDI_CDC_COMM_STRING_ID_0
#define UDI_CDC_COMM_STRING_ID_0 0
#define UDI_CDC_COMM_STRING_ID_0 0
#endif
#ifndef UDI_CDC_DATA_STRING_ID_0
#define UDI_CDC_DATA_STRING_ID_0 0
#define UDI_CDC_DATA_STRING_ID_0 0
#endif
#define UDI_CDC_IAD_DESC_0 UDI_CDC_IAD_DESC(0)
#define UDI_CDC_COMM_DESC_0 UDI_CDC_COMM_DESC(0)
@ -151,13 +151,13 @@ typedef struct {
//! By default no string associated to these interfaces
#ifndef UDI_CDC_IAD_STRING_ID_1
#define UDI_CDC_IAD_STRING_ID_1 0
#define UDI_CDC_IAD_STRING_ID_1 0
#endif
#ifndef UDI_CDC_COMM_STRING_ID_1
#define UDI_CDC_COMM_STRING_ID_1 0
#define UDI_CDC_COMM_STRING_ID_1 0
#endif
#ifndef UDI_CDC_DATA_STRING_ID_1
#define UDI_CDC_DATA_STRING_ID_1 0
#define UDI_CDC_DATA_STRING_ID_1 0
#endif
#define UDI_CDC_IAD_DESC_1 UDI_CDC_IAD_DESC(1)
#define UDI_CDC_COMM_DESC_1 UDI_CDC_COMM_DESC(1)
@ -166,13 +166,13 @@ typedef struct {
//! By default no string associated to these interfaces
#ifndef UDI_CDC_IAD_STRING_ID_2
#define UDI_CDC_IAD_STRING_ID_2 0
#define UDI_CDC_IAD_STRING_ID_2 0
#endif
#ifndef UDI_CDC_COMM_STRING_ID_2
#define UDI_CDC_COMM_STRING_ID_2 0
#define UDI_CDC_COMM_STRING_ID_2 0
#endif
#ifndef UDI_CDC_DATA_STRING_ID_2
#define UDI_CDC_DATA_STRING_ID_2 0
#define UDI_CDC_DATA_STRING_ID_2 0
#endif
#define UDI_CDC_IAD_DESC_2 UDI_CDC_IAD_DESC(2)
#define UDI_CDC_COMM_DESC_2 UDI_CDC_COMM_DESC(2)
@ -181,13 +181,13 @@ typedef struct {
//! By default no string associated to these interfaces
#ifndef UDI_CDC_IAD_STRING_ID_3
#define UDI_CDC_IAD_STRING_ID_3 0
#define UDI_CDC_IAD_STRING_ID_3 0
#endif
#ifndef UDI_CDC_COMM_STRING_ID_3
#define UDI_CDC_COMM_STRING_ID_3 0
#define UDI_CDC_COMM_STRING_ID_3 0
#endif
#ifndef UDI_CDC_DATA_STRING_ID_3
#define UDI_CDC_DATA_STRING_ID_3 0
#define UDI_CDC_DATA_STRING_ID_3 0
#endif
#define UDI_CDC_IAD_DESC_3 UDI_CDC_IAD_DESC(3)
#define UDI_CDC_COMM_DESC_3 UDI_CDC_COMM_DESC(3)
@ -196,13 +196,13 @@ typedef struct {
//! By default no string associated to these interfaces
#ifndef UDI_CDC_IAD_STRING_ID_4
#define UDI_CDC_IAD_STRING_ID_4 0
#define UDI_CDC_IAD_STRING_ID_4 0
#endif
#ifndef UDI_CDC_COMM_STRING_ID_4
#define UDI_CDC_COMM_STRING_ID_4 0
#define UDI_CDC_COMM_STRING_ID_4 0
#endif
#ifndef UDI_CDC_DATA_STRING_ID_4
#define UDI_CDC_DATA_STRING_ID_4 0
#define UDI_CDC_DATA_STRING_ID_4 0
#endif
#define UDI_CDC_IAD_DESC_4 UDI_CDC_IAD_DESC(4)
#define UDI_CDC_COMM_DESC_4 UDI_CDC_COMM_DESC(4)
@ -211,13 +211,13 @@ typedef struct {
//! By default no string associated to these interfaces
#ifndef UDI_CDC_IAD_STRING_ID_5
#define UDI_CDC_IAD_STRING_ID_5 0
#define UDI_CDC_IAD_STRING_ID_5 0
#endif
#ifndef UDI_CDC_COMM_STRING_ID_5
#define UDI_CDC_COMM_STRING_ID_5 0
#define UDI_CDC_COMM_STRING_ID_5 0
#endif
#ifndef UDI_CDC_DATA_STRING_ID_5
#define UDI_CDC_DATA_STRING_ID_5 0
#define UDI_CDC_DATA_STRING_ID_5 0
#endif
#define UDI_CDC_IAD_DESC_5 UDI_CDC_IAD_DESC(5)
#define UDI_CDC_COMM_DESC_5 UDI_CDC_COMM_DESC(5)
@ -226,13 +226,13 @@ typedef struct {
//! By default no string associated to these interfaces
#ifndef UDI_CDC_IAD_STRING_ID_6
#define UDI_CDC_IAD_STRING_ID_6 0
#define UDI_CDC_IAD_STRING_ID_6 0
#endif
#ifndef UDI_CDC_COMM_STRING_ID_6
#define UDI_CDC_COMM_STRING_ID_6 0
#define UDI_CDC_COMM_STRING_ID_6 0
#endif
#ifndef UDI_CDC_DATA_STRING_ID_6
#define UDI_CDC_DATA_STRING_ID_6 0
#define UDI_CDC_DATA_STRING_ID_6 0
#endif
#define UDI_CDC_IAD_DESC_6 UDI_CDC_IAD_DESC(6)
#define UDI_CDC_COMM_DESC_6 UDI_CDC_COMM_DESC(6)
@ -240,7 +240,6 @@ typedef struct {
#define UDI_CDC_DATA_DESC_6_HS UDI_CDC_DATA_DESC_HS(6)
//@}
//! Content of CDC IAD interface descriptor for all speeds
#define UDI_CDC_IAD_DESC(port) { \
.bLength = sizeof(usb_iad_desc_t),\
@ -270,7 +269,7 @@ typedef struct {
.call_mgmt.bDescriptorType = CDC_CS_INTERFACE,\
.call_mgmt.bDescriptorSubtype = CDC_SCS_CALL_MGMT,\
.call_mgmt.bmCapabilities = \
CDC_CALL_MGMT_SUPPORTED | CDC_CALL_MGMT_OVER_DCI,\
CDC_CALL_MGMT_SUPPORTED | CDC_CALL_MGMT_OVER_DCI,\
.acm.bFunctionLength = sizeof(usb_cdc_acm_desc_t),\
.acm.bDescriptorType = CDC_CS_INTERFACE,\
.acm.bDescriptorSubtype = CDC_SCS_ACM,\
@ -610,40 +609,37 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* \subsection udi_cdc_basic_use_case_usage_code Example code
* Content of conf_usb.h:
* \code
#define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
extern bool my_callback_cdc_enable(void);
#define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
extern void my_callback_cdc_disable(void);
#define UDI_CDC_LOW_RATE
#define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
extern bool my_callback_cdc_enable(void);
#define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
extern void my_callback_cdc_disable(void);
#define UDI_CDC_LOW_RATE
#define UDI_CDC_DEFAULT_RATE 115200
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
#define UDI_CDC_DEFAULT_DATABITS 8
#define UDI_CDC_DEFAULT_RATE 115200
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
#define UDI_CDC_DEFAULT_DATABITS 8
#include "udi_cdc_conf.h" // At the end of conf_usb.h file
#include "udi_cdc_conf.h" // At the end of conf_usb.h file
\endcode
*
* Add to application C-file:
* \code
static bool my_flag_autorize_cdc_transfert = false;
bool my_callback_cdc_enable(void)
{
my_flag_autorize_cdc_transfert = true;
return true;
}
void my_callback_cdc_disable(void)
{
my_flag_autorize_cdc_transfert = false;
}
static bool my_flag_autorize_cdc_transfert = false;
bool my_callback_cdc_enable(void) {
my_flag_autorize_cdc_transfert = true;
return true;
}
void my_callback_cdc_disable(void) {
my_flag_autorize_cdc_transfert = false;
}
void task(void)
{
if (my_flag_autorize_cdc_transfert) {
udi_cdc_putc('A');
udi_cdc_getc();
}
}
void task(void) {
if (my_flag_autorize_cdc_transfert) {
udi_cdc_putc('A');
udi_cdc_getc();
}
}
\endcode
*
* \subsection udi_cdc_basic_use_case_setup_flow Workflow
@ -652,14 +648,14 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* - \code #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for CDC \endcode
* \note The USB serial number is mandatory when a CDC interface is used.
* - \code #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
extern bool my_callback_cdc_enable(void); \endcode
extern bool my_callback_cdc_enable(void); \endcode
* \note After the device enumeration (detecting and identifying USB devices),
* the USB host starts the device configuration. When the USB CDC interface
* from the device is accepted by the host, the USB host enables this interface and the
* UDI_CDC_ENABLE_EXT() callback function is called and return true.
* Thus, when this event is received, the data transfer on CDC interface are authorized.
* - \code #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
extern void my_callback_cdc_disable(void); \endcode
extern void my_callback_cdc_disable(void); \endcode
* \note When the USB device is unplugged or is reset by the USB host, the USB
* interface is disabled and the UDI_CDC_DISABLE_EXT() callback function
* is called. Thus, the data transfer must be stopped on CDC interface.
@ -667,19 +663,19 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* \note Define it when the transfer CDC Device to Host is a low rate
* (<512000 bauds) to reduce CDC buffers size.
* - \code #define UDI_CDC_DEFAULT_RATE 115200
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
#define UDI_CDC_DEFAULT_DATABITS 8 \endcode
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
#define UDI_CDC_DEFAULT_DATABITS 8 \endcode
* \note Default configuration of communication port at startup.
* -# Send or wait data on CDC line:
* - \code // Waits and gets a value on CDC line
int udi_cdc_getc(void);
// Reads a RAM buffer on CDC line
iram_size_t udi_cdc_read_buf(int *buf, iram_size_t size);
// Puts a byte on CDC line
int udi_cdc_putc(int value);
// Writes a RAM buffer on CDC line
iram_size_t udi_cdc_write_buf(const int *buf, iram_size_t size); \endcode
int udi_cdc_getc(void);
// Reads a RAM buffer on CDC line
iram_size_t udi_cdc_read_buf(int *buf, iram_size_t size);
// Puts a byte on CDC line
int udi_cdc_putc(int value);
// Writes a RAM buffer on CDC line
iram_size_t udi_cdc_write_buf(const int *buf, iram_size_t size); \endcode
*
* \section udi_cdc_use_cases Advanced use cases
* For more advanced use of the UDI CDC module, see the following use cases:
@ -713,90 +709,90 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* \subsection udi_cdc_use_case_composite_usage_code Example code
* Content of conf_usb.h:
* \code
#define USB_DEVICE_EP_CTRL_SIZE 64
#define USB_DEVICE_NB_INTERFACE (X+2)
#define USB_DEVICE_MAX_EP (X+3)
#define USB_DEVICE_EP_CTRL_SIZE 64
#define USB_DEVICE_NB_INTERFACE (X+2)
#define USB_DEVICE_MAX_EP (X+3)
#define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
#define UDI_CDC_COMM_IFACE_NUMBER_0 X+0
#define UDI_CDC_DATA_IFACE_NUMBER_0 X+1
#define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
#define UDI_CDC_COMM_IFACE_NUMBER_0 X+0
#define UDI_CDC_DATA_IFACE_NUMBER_0 X+1
#define UDI_COMPOSITE_DESC_T \
usb_iad_desc_t udi_cdc_iad; \
udi_cdc_comm_desc_t udi_cdc_comm; \
udi_cdc_data_desc_t udi_cdc_data; \
...
#define UDI_COMPOSITE_DESC_FS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
...
#define UDI_COMPOSITE_DESC_HS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
...
#define UDI_COMPOSITE_API \
&udi_api_cdc_comm, \
&udi_api_cdc_data, \
...
#define UDI_COMPOSITE_DESC_T \
usb_iad_desc_t udi_cdc_iad; \
udi_cdc_comm_desc_t udi_cdc_comm; \
udi_cdc_data_desc_t udi_cdc_data; \
...
#define UDI_COMPOSITE_DESC_FS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
...
#define UDI_COMPOSITE_DESC_HS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
...
#define UDI_COMPOSITE_API \
&udi_api_cdc_comm, \
&udi_api_cdc_data, \
...
\endcode
*
* \subsection udi_cdc_use_case_composite_usage_flow Workflow
* -# Ensure that conf_usb.h is available and contains the following parameters
* required for a USB composite device configuration:
* - \code // Endpoint control size, This must be:
// - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM)
// - 64 for a high speed device
#define USB_DEVICE_EP_CTRL_SIZE 64
// Total Number of interfaces on this USB device.
// Add 2 for CDC.
#define USB_DEVICE_NB_INTERFACE (X+2)
// Total number of endpoints on this USB device.
// This must include each endpoint for each interface.
// Add 3 for CDC.
#define USB_DEVICE_MAX_EP (X+3) \endcode
// - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM)
// - 64 for a high speed device
#define USB_DEVICE_EP_CTRL_SIZE 64
// Total Number of interfaces on this USB device.
// Add 2 for CDC.
#define USB_DEVICE_NB_INTERFACE (X+2)
// Total number of endpoints on this USB device.
// This must include each endpoint for each interface.
// Add 3 for CDC.
#define USB_DEVICE_MAX_EP (X+3) \endcode
* -# Ensure that conf_usb.h contains the description of
* composite device:
* - \code // The endpoint numbers chosen by you for the CDC.
// The endpoint numbers starting from 1.
#define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
// The interface index of an interface starting from 0
#define UDI_CDC_COMM_IFACE_NUMBER_0 X+0
#define UDI_CDC_DATA_IFACE_NUMBER_0 X+1 \endcode
// The endpoint numbers starting from 1.
#define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
// The interface index of an interface starting from 0
#define UDI_CDC_COMM_IFACE_NUMBER_0 X+0
#define UDI_CDC_DATA_IFACE_NUMBER_0 X+1 \endcode
* -# Ensure that conf_usb.h contains the following parameters
* required for a USB composite device configuration:
* - \code // USB Interfaces descriptor structure
#define UDI_COMPOSITE_DESC_T \
...
usb_iad_desc_t udi_cdc_iad; \
udi_cdc_comm_desc_t udi_cdc_comm; \
udi_cdc_data_desc_t udi_cdc_data; \
...
// USB Interfaces descriptor value for Full Speed
#define UDI_COMPOSITE_DESC_FS \
...
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
...
// USB Interfaces descriptor value for High Speed
#define UDI_COMPOSITE_DESC_HS \
...
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
...
// USB Interface APIs
#define UDI_COMPOSITE_API \
...
&udi_api_cdc_comm, \
&udi_api_cdc_data, \
... \endcode
#define UDI_COMPOSITE_DESC_T \
...
usb_iad_desc_t udi_cdc_iad; \
udi_cdc_comm_desc_t udi_cdc_comm; \
udi_cdc_data_desc_t udi_cdc_data; \
...
// USB Interfaces descriptor value for Full Speed
#define UDI_COMPOSITE_DESC_FS \
...
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
...
// USB Interfaces descriptor value for High Speed
#define UDI_COMPOSITE_DESC_HS \
...
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
...
// USB Interface APIs
#define UDI_COMPOSITE_API \
...
&udi_api_cdc_comm, \
&udi_api_cdc_data, \
... \endcode
* - \note The descriptors order given in the four lists above must be the
* same as the order defined by all interface indexes. The interface index
* orders are defined through UDI_X_IFACE_NUMBER defines.\n

142
Marlin/src/HAL/DUE/usb/udi_msc.c
View file

@ -372,9 +372,7 @@ static void udi_msc_sbc_trans(bool b_read);
//@}
bool udi_msc_enable(void)
{
bool udi_msc_enable(void) {
uint8_t lun;
udi_msc_b_trans_req = false;
udi_msc_b_cbw_invalid = false;
@ -397,18 +395,14 @@ bool udi_msc_enable(void)
return true;
}
void udi_msc_disable(void)
{
void udi_msc_disable(void) {
udi_msc_b_trans_req = false;
udi_msc_b_ack_trans = true;
udi_msc_b_reset_trans = true;
UDI_MSC_DISABLE_EXT();
}
bool udi_msc_setup(void)
{
bool udi_msc_setup(void) {
if (Udd_setup_is_in()) {
// Requests Interface GET
if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
@ -451,17 +445,14 @@ bool udi_msc_setup(void)
return false; // Not supported request
}
uint8_t udi_msc_getsetting(void)
{
uint8_t udi_msc_getsetting(void) {
return 0; // MSC don't have multiple alternate setting
}
// ------------------------
//------- Routines to process CBW packet
static void udi_msc_cbw_invalid(void)
{
static void udi_msc_cbw_invalid(void) {
if (!udi_msc_b_cbw_invalid)
return; // Don't re-stall endpoint if error reset by setup
udd_ep_set_halt(UDI_MSC_EP_OUT);
@ -469,8 +460,7 @@ static void udi_msc_cbw_invalid(void)
udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_invalid);
}
static void udi_msc_csw_invalid(void)
{
static void udi_msc_csw_invalid(void) {
if (!udi_msc_b_cbw_invalid)
return; // Don't re-stall endpoint if error reset by setup
udd_ep_set_halt(UDI_MSC_EP_IN);
@ -478,8 +468,7 @@ static void udi_msc_csw_invalid(void)
udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_invalid);
}
static void udi_msc_cbw_wait(void)
{
static void udi_msc_cbw_wait(void) {
// Register buffer and callback on OUT endpoint
if (!udd_ep_run(UDI_MSC_EP_OUT, true,
(uint8_t *) & udi_msc_cbw,
@ -490,10 +479,8 @@ static void udi_msc_cbw_wait(void)
}
}
static void udi_msc_cbw_received(udd_ep_status_t status,
iram_size_t nb_received, udd_ep_id_t ep)
{
iram_size_t nb_received, udd_ep_id_t ep) {
UNUSED(ep);
// Check status of transfer
if (UDD_EP_TRANSFER_OK != status) {
@ -582,9 +569,7 @@ static void udi_msc_cbw_received(udd_ep_status_t status,
}
}
static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag)
{
static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag) {
/*
* The following cases should result in a phase error:
* - Case 2: Hn < Di
@ -612,12 +597,10 @@ static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag)
return true;
}
// ------------------------
//------- Routines to process small data packet
static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size)
{
static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size) {
// Sends data on IN endpoint
if (!udd_ep_run(UDI_MSC_EP_IN, true,
buffer, buf_size, udi_msc_data_sent)) {
@ -627,10 +610,8 @@ static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size)
}
}
static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
udd_ep_id_t ep)
{
udd_ep_id_t ep) {
UNUSED(ep);
if (UDD_EP_TRANSFER_OK != status) {
// Error protocol
@ -644,12 +625,10 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
udi_msc_csw_process();
}
// ------------------------
//------- Routines to process CSW packet
static void udi_msc_csw_process(void)
{
static void udi_msc_csw_process(void) {
if (0 != udi_msc_csw.dCSWDataResidue) {
// Residue not NULL
// then STALL next request from USB host on corresponding endpoint
@ -664,9 +643,7 @@ static void udi_msc_csw_process(void)
udi_msc_csw_send();
}
void udi_msc_csw_send(void)
{
void udi_msc_csw_send(void) {
// Sends CSW on IN endpoint
if (!udd_ep_run(UDI_MSC_EP_IN, false,
(uint8_t *) & udi_msc_csw,
@ -678,10 +655,8 @@ void udi_msc_csw_send(void)
}
}
static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
udd_ep_id_t ep)
{
udd_ep_id_t ep) {
UNUSED(ep);
UNUSED(status);
UNUSED(nb_sent);
@ -690,20 +665,17 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
udi_msc_cbw_wait();
}
// ------------------------
//------- Routines manage sense data
static void udi_msc_clear_sense(void)
{
static void udi_msc_clear_sense(void) {
memset((uint8_t*)&udi_msc_sense, 0, sizeof(struct scsi_request_sense_data));
udi_msc_sense.valid_reponse_code = SCSI_SENSE_VALID | SCSI_SENSE_CURRENT;
udi_msc_sense.AddSenseLen = SCSI_SENSE_ADDL_LEN(sizeof(udi_msc_sense));
}
static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
uint32_t lba)
{
uint32_t lba) {
udi_msc_clear_sense();
udi_msc_csw.bCSWStatus = USB_CSW_STATUS_FAIL;
udi_msc_sense.sense_flag_key = sense_key;
@ -715,53 +687,39 @@ static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
udi_msc_sense.AddSnsCodeQlfr = add_sense;
}
static void udi_msc_sense_pass(void)
{
static void udi_msc_sense_pass(void) {
udi_msc_clear_sense();
udi_msc_csw.bCSWStatus = USB_CSW_STATUS_PASS;
}
static void udi_msc_sense_fail_not_present(void)
{
static void udi_msc_sense_fail_not_present(void) {
udi_msc_sense_fail(SCSI_SK_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT, 0);
}
static void udi_msc_sense_fail_busy_or_change(void)
{
udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION,
SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0);
static void udi_msc_sense_fail_busy_or_change(void) {
udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION, SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0);
}
static void udi_msc_sense_fail_hardware(void)
{
udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR,
SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0);
static void udi_msc_sense_fail_hardware(void) {
udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR, SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0);
}
static void udi_msc_sense_fail_protected(void)
{
static void udi_msc_sense_fail_protected(void) {
udi_msc_sense_fail(SCSI_SK_DATA_PROTECT, SCSI_ASC_WRITE_PROTECTED, 0);
}
static void udi_msc_sense_fail_cdb_invalid(void)
{
udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB, 0);
static void udi_msc_sense_fail_cdb_invalid(void) {
udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST, SCSI_ASC_INVALID_FIELD_IN_CDB, 0);
}
static void udi_msc_sense_command_invalid(void)
{
udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0);
static void udi_msc_sense_command_invalid(void) {
udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST, SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0);
}
// ------------------------
//------- Routines manage SCSI Commands
static void udi_msc_spc_requestsense(void)
{
static void udi_msc_spc_requestsense(void) {
uint8_t length = udi_msc_cbw.CDB[4];
// Can't send more than sense data length
@ -774,9 +732,7 @@ static void udi_msc_spc_requestsense(void)
udi_msc_data_send((uint8_t*)&udi_msc_sense, length);
}
static void udi_msc_spc_inquiry(void)
{
static void udi_msc_spc_inquiry(void) {
uint8_t length, i;
UDC_DATA(4)
// Constant inquiry data for all LUNs
@ -835,9 +791,7 @@ static void udi_msc_spc_inquiry(void)
udi_msc_data_send((uint8_t *) & udi_msc_inquiry_data, length);
}
static bool udi_msc_spc_testunitready_global(void)
{
static bool udi_msc_spc_testunitready_global(void) {
switch (mem_test_unit_ready(udi_msc_cbw.bCBWLUN)) {
case CTRL_GOOD:
return true; // Don't change sense data
@ -855,9 +809,7 @@ static bool udi_msc_spc_testunitready_global(void)
return false;
}
static void udi_msc_spc_testunitready(void)
{
static void udi_msc_spc_testunitready(void) {
if (udi_msc_spc_testunitready_global()) {
// LUN ready, then update sense data with status pass
udi_msc_sense_pass();
@ -866,9 +818,7 @@ static void udi_msc_spc_testunitready(void)
udi_msc_csw_process();
}
static void udi_msc_spc_mode_sense(bool b_sense10)
{
static void udi_msc_spc_mode_sense(bool b_sense10) {
// Union of all mode sense structures
union sense_6_10 {
struct {
@ -943,9 +893,7 @@ static void udi_msc_spc_mode_sense(bool b_sense10)
udi_msc_data_send((uint8_t *) & sense, request_lgt);
}
static void udi_msc_spc_prevent_allow_medium_removal(void)
{
static void udi_msc_spc_prevent_allow_medium_removal(void) {
uint8_t prevent = udi_msc_cbw.CDB[4];
if (0 == prevent) {
udi_msc_sense_pass();
@ -955,9 +903,7 @@ static void udi_msc_spc_prevent_allow_medium_removal(void)
udi_msc_csw_process();
}
static void udi_msc_sbc_start_stop(void)
{
static void udi_msc_sbc_start_stop(void) {
bool start = 0x1 & udi_msc_cbw.CDB[4];
bool loej = 0x2 & udi_msc_cbw.CDB[4];
if (loej) {
@ -967,9 +913,7 @@ static void udi_msc_sbc_start_stop(void)
udi_msc_csw_process();
}
static void udi_msc_sbc_read_capacity(void)
{
static void udi_msc_sbc_read_capacity(void) {
UDC_BSS(4) static struct sbc_read_capacity10_data udi_msc_capacity;
if (!udi_msc_cbw_validate(sizeof(udi_msc_capacity),
@ -1003,9 +947,7 @@ static void udi_msc_sbc_read_capacity(void)
sizeof(udi_msc_capacity));
}
static void udi_msc_sbc_trans(bool b_read)
{
static void udi_msc_sbc_trans(bool b_read) {
uint32_t trans_size;
if (!b_read) {
@ -1038,9 +980,7 @@ static void udi_msc_sbc_trans(bool b_read)
UDI_MSC_NOTIFY_TRANS_EXT();
}
bool udi_msc_process_trans(void)
{
bool udi_msc_process_trans(void) {
Ctrl_status status;
if (!udi_msc_b_trans_req)
@ -1084,10 +1024,8 @@ bool udi_msc_process_trans(void)
return true;
}
static void udi_msc_trans_ack(udd_ep_status_t status, iram_size_t n,
udd_ep_id_t ep)
{
udd_ep_id_t ep) {
UNUSED(ep);
UNUSED(n);
// Update variable to signal the end of transfer
@ -1095,10 +1033,8 @@ static void udi_msc_trans_ack(udd_ep_status_t status, iram_size_t n,
udi_msc_b_ack_trans = true;
}
bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep))
{
void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)) {
if (!udi_msc_b_ack_trans)
return false; // No possible, transfer on going

227
Marlin/src/HAL/DUE/usb/udi_msc.h
View file

@ -77,9 +77,9 @@ extern UDC_DESC_STORAGE udi_api_t udi_api_msc;
//! Interface descriptor structure for MSC
typedef struct {
usb_iface_desc_t iface;
usb_ep_desc_t ep_in;
usb_ep_desc_t ep_out;
usb_iface_desc_t iface;
usb_ep_desc_t ep_in;
usb_ep_desc_t ep_out;
} udi_msc_desc_t;
//! By default no string associated to this interface
@ -94,32 +94,32 @@ typedef struct {
//! Content of MSC interface descriptor for all speeds
#define UDI_MSC_DESC \
.iface.bLength = sizeof(usb_iface_desc_t),\
.iface.bDescriptorType = USB_DT_INTERFACE,\
.iface.bInterfaceNumber = UDI_MSC_IFACE_NUMBER,\
.iface.bAlternateSetting = 0,\
.iface.bNumEndpoints = 2,\
.iface.bInterfaceClass = MSC_CLASS,\
.iface.bInterfaceSubClass = MSC_SUBCLASS_TRANSPARENT,\
.iface.bInterfaceProtocol = MSC_PROTOCOL_BULK,\
.iface.iInterface = UDI_MSC_STRING_ID,\
.ep_in.bLength = sizeof(usb_ep_desc_t),\
.ep_in.bDescriptorType = USB_DT_ENDPOINT,\
.ep_in.bEndpointAddress = UDI_MSC_EP_IN,\
.ep_in.bmAttributes = USB_EP_TYPE_BULK,\
.ep_in.bInterval = 0,\
.ep_out.bLength = sizeof(usb_ep_desc_t),\
.ep_out.bDescriptorType = USB_DT_ENDPOINT,\
.ep_out.bEndpointAddress = UDI_MSC_EP_OUT,\
.ep_out.bmAttributes = USB_EP_TYPE_BULK,\
.ep_out.bInterval = 0,
.iface.bLength = sizeof(usb_iface_desc_t),\
.iface.bDescriptorType = USB_DT_INTERFACE,\
.iface.bInterfaceNumber = UDI_MSC_IFACE_NUMBER,\
.iface.bAlternateSetting = 0,\
.iface.bNumEndpoints = 2,\
.iface.bInterfaceClass = MSC_CLASS,\
.iface.bInterfaceSubClass = MSC_SUBCLASS_TRANSPARENT,\
.iface.bInterfaceProtocol = MSC_PROTOCOL_BULK,\
.iface.iInterface = UDI_MSC_STRING_ID,\
.ep_in.bLength = sizeof(usb_ep_desc_t),\
.ep_in.bDescriptorType = USB_DT_ENDPOINT,\
.ep_in.bEndpointAddress = UDI_MSC_EP_IN,\
.ep_in.bmAttributes = USB_EP_TYPE_BULK,\
.ep_in.bInterval = 0,\
.ep_out.bLength = sizeof(usb_ep_desc_t),\
.ep_out.bDescriptorType = USB_DT_ENDPOINT,\
.ep_out.bEndpointAddress = UDI_MSC_EP_OUT,\
.ep_out.bmAttributes = USB_EP_TYPE_BULK,\
.ep_out.bInterval = 0,
//! Content of MSC interface descriptor for full speed only
#define UDI_MSC_DESC_FS {\
UDI_MSC_DESC \
.ep_in.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\
.ep_out.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\
}
UDI_MSC_DESC \
.ep_in.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\
.ep_out.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\
}
//! Content of MSC interface descriptor for high speed only
#define UDI_MSC_DESC_HS {\
@ -129,7 +129,6 @@ typedef struct {
}
//@}
/**
* \ingroup udi_group
* \defgroup udi_msc_group USB Device Interface (UDI) for Mass Storage Class (MSC)
@ -163,14 +162,13 @@ bool udi_msc_process_trans(void);
* \return \c 1 if function was successfully done, otherwise \c 0.
*/
bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep));
void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep));
//@}
#ifdef __cplusplus
}
#endif
/**
* \page udi_msc_quickstart Quick start guide for USB device Mass Storage module (UDI MSC)
*
@ -200,35 +198,32 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* \subsection udi_msc_basic_use_case_usage_code Example code
* Content of conf_usb.h:
* \code
#define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for MSC
#define UDI_MSC_GLOBAL_VENDOR_ID \
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0'
#define UDI_MSC_ENABLE_EXT() my_callback_msc_enable()
extern bool my_callback_msc_enable(void);
#define UDI_MSC_DISABLE_EXT() my_callback_msc_disable()
extern void my_callback_msc_disable(void);
#include "udi_msc_conf.h" // At the end of conf_usb.h file
#define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for MSC
#define UDI_MSC_GLOBAL_VENDOR_ID \
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0'
#define UDI_MSC_ENABLE_EXT() my_callback_msc_enable()
extern bool my_callback_msc_enable(void);
#define UDI_MSC_DISABLE_EXT() my_callback_msc_disable()
extern void my_callback_msc_disable(void);
#include "udi_msc_conf.h" // At the end of conf_usb.h file
\endcode
*
* Add to application C-file:
* \code
static bool my_flag_autorize_msc_transfert = false;
bool my_callback_msc_enable(void)
{
my_flag_autorize_msc_transfert = true;
return true;
}
void my_callback_msc_disable(void)
{
my_flag_autorize_msc_transfert = false;
}
static bool my_flag_autorize_msc_transfert = false;
bool my_callback_msc_enable(void) {
my_flag_autorize_msc_transfert = true;
return true;
}
void my_callback_msc_disable(void) {
my_flag_autorize_msc_transfert = false;
}
void task(void)
{
udi_msc_process_trans();
}
void task(void) {
udi_msc_process_trans();
}
\endcode
*
* \subsection udi_msc_basic_use_case_setup_flow Workflow
@ -237,14 +232,14 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* - \code #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for MSC \endcode
* \note The USB serial number is mandatory when a MSC interface is used.
* - \code //! Vendor name and Product version of MSC interface
#define UDI_MSC_GLOBAL_VENDOR_ID \
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0' \endcode
#define UDI_MSC_GLOBAL_VENDOR_ID \
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0' \endcode
* \note The USB MSC interface requires a vendor ID (8 ASCII characters)
* and a product version (4 ASCII characters).
* - \code #define UDI_MSC_ENABLE_EXT() my_callback_msc_enable()
extern bool my_callback_msc_enable(void); \endcode
extern bool my_callback_msc_enable(void); \endcode
* \note After the device enumeration (detecting and identifying USB devices),
* the USB host starts the device configuration. When the USB MSC interface
* from the device is accepted by the host, the USB host enables this interface and the
@ -252,7 +247,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* Thus, when this event is received, the tasks which call
* udi_msc_process_trans() must be enabled.
* - \code #define UDI_MSC_DISABLE_EXT() my_callback_msc_disable()
extern void my_callback_msc_disable(void); \endcode
extern void my_callback_msc_disable(void); \endcode
* \note When the USB device is unplugged or is reset by the USB host, the USB
* interface is disabled and the UDI_MSC_DISABLE_EXT() callback function
* is called. Thus, it is recommended to disable the task which is called udi_msc_process_trans().
@ -261,15 +256,15 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* must be done outside USB interrupt routine. This is done in the MSC process
* ("udi_msc_process_trans()") called by main loop:
* - \code * void task(void) {
udi_msc_process_trans();
} \endcode
udi_msc_process_trans();
} \endcode
* -# The MSC speed depends on task periodicity. To get the best speed
* the notification callback "UDI_MSC_NOTIFY_TRANS_EXT" can be used to wakeup
* this task (Example, through a mutex):
* - \code #define UDI_MSC_NOTIFY_TRANS_EXT() msc_notify_trans()
void msc_notify_trans(void) {
wakeup_my_task();
} \endcode
void msc_notify_trans(void) {
wakeup_my_task();
} \endcode
*
* \section udi_msc_use_cases Advanced use cases
* For more advanced use of the UDI MSC module, see the following use cases:
@ -302,72 +297,72 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* \subsection udi_msc_use_case_composite_usage_code Example code
* Content of conf_usb.h:
* \code
#define USB_DEVICE_EP_CTRL_SIZE 64
#define USB_DEVICE_NB_INTERFACE (X+1)
#define USB_DEVICE_MAX_EP (X+2)
#define USB_DEVICE_EP_CTRL_SIZE 64
#define USB_DEVICE_NB_INTERFACE (X+1)
#define USB_DEVICE_MAX_EP (X+2)
#define UDI_MSC_EP_IN (X | USB_EP_DIR_IN)
#define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT)
#define UDI_MSC_IFACE_NUMBER X
#define UDI_MSC_EP_IN (X | USB_EP_DIR_IN)
#define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT)
#define UDI_MSC_IFACE_NUMBER X
#define UDI_COMPOSITE_DESC_T \
udi_msc_desc_t udi_msc; \
...
#define UDI_COMPOSITE_DESC_FS \
.udi_msc = UDI_MSC_DESC, \
...
#define UDI_COMPOSITE_DESC_HS \
.udi_msc = UDI_MSC_DESC, \
...
#define UDI_COMPOSITE_API \
&udi_api_msc, \
...
#define UDI_COMPOSITE_DESC_T \
udi_msc_desc_t udi_msc; \
...
#define UDI_COMPOSITE_DESC_FS \
.udi_msc = UDI_MSC_DESC, \
...
#define UDI_COMPOSITE_DESC_HS \
.udi_msc = UDI_MSC_DESC, \
...
#define UDI_COMPOSITE_API \
&udi_api_msc, \
...
\endcode
*
* \subsection udi_msc_use_case_composite_usage_flow Workflow
* -# Ensure that conf_usb.h is available and contains the following parameters
* required for a USB composite device configuration:
* - \code // Endpoint control size, This must be:
// - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM)
// - 64 for a high speed device
#define USB_DEVICE_EP_CTRL_SIZE 64
// Total Number of interfaces on this USB device.
// Add 1 for MSC.
#define USB_DEVICE_NB_INTERFACE (X+1)
// Total number of endpoints on this USB device.
// This must include each endpoint for each interface.
// Add 2 for MSC.
#define USB_DEVICE_MAX_EP (X+2) \endcode
// - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM)
// - 64 for a high speed device
#define USB_DEVICE_EP_CTRL_SIZE 64
// Total Number of interfaces on this USB device.
// Add 1 for MSC.
#define USB_DEVICE_NB_INTERFACE (X+1)
// Total number of endpoints on this USB device.
// This must include each endpoint for each interface.
// Add 2 for MSC.
#define USB_DEVICE_MAX_EP (X+2) \endcode
* -# Ensure that conf_usb.h contains the description of
* composite device:
* - \code // The endpoint numbers chosen by you for the MSC.
// The endpoint numbers starting from 1.
#define UDI_MSC_EP_IN (X | USB_EP_DIR_IN)
#define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT)
// The interface index of an interface starting from 0
#define UDI_MSC_IFACE_NUMBER X \endcode
// The endpoint numbers starting from 1.
#define UDI_MSC_EP_IN (X | USB_EP_DIR_IN)
#define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT)
// The interface index of an interface starting from 0
#define UDI_MSC_IFACE_NUMBER X \endcode
* -# Ensure that conf_usb.h contains the following parameters
* required for a USB composite device configuration:
* - \code // USB Interfaces descriptor structure
#define UDI_COMPOSITE_DESC_T \
...
udi_msc_desc_t udi_msc; \
...
// USB Interfaces descriptor value for Full Speed
#define UDI_COMPOSITE_DESC_FS \
...
.udi_msc = UDI_MSC_DESC_FS, \
...
// USB Interfaces descriptor value for High Speed
#define UDI_COMPOSITE_DESC_HS \
...
.udi_msc = UDI_MSC_DESC_HS, \
...
// USB Interface APIs
#define UDI_COMPOSITE_API \
...
&udi_api_msc, \
... \endcode
#define UDI_COMPOSITE_DESC_T \
...
udi_msc_desc_t udi_msc; \
...
// USB Interfaces descriptor value for Full Speed
#define UDI_COMPOSITE_DESC_FS \
...
.udi_msc = UDI_MSC_DESC_FS, \
...
// USB Interfaces descriptor value for High Speed
#define UDI_COMPOSITE_DESC_HS \
...
.udi_msc = UDI_MSC_DESC_HS, \
...
// USB Interface APIs
#define UDI_COMPOSITE_API \
...
&udi_api_msc, \
... \endcode
* - \note The descriptors order given in the four lists above must be the
* same as the order defined by all interface indexes. The interface index
* orders are defined through UDI_X_IFACE_NUMBER defines.

27
Marlin/src/HAL/DUE/usb/uotghs_otg.h
View file

@ -127,13 +127,13 @@ void otg_dual_disable(void);
//! These macros allows to enable/disable pad and UOTGHS hardware
//! @{
//! Reset USB macro
#define otg_reset() \
do { \
UOTGHS->UOTGHS_CTRL = 0; \
while( UOTGHS->UOTGHS_SR & 0x3FFF) {\
UOTGHS->UOTGHS_SCR = 0xFFFFFFFF;\
} \
} while (0)
#define otg_reset() \
do { \
UOTGHS->UOTGHS_CTRL = 0; \
while( UOTGHS->UOTGHS_SR & 0x3FFF) { \
UOTGHS->UOTGHS_SCR = 0xFFFFFFFF; \
} \
} while (0)
//! Enable USB macro
#define otg_enable() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_USBE))
//! Disable USB macro
@ -157,15 +157,14 @@ void otg_dual_disable(void);
//! Configure time-out of specified OTG timer
#define otg_configure_timeout(timer, timeout) (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\
Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\
Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk, timeout),\
Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK))
Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\
Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk, timeout),\
Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK))
//! Get configured time-out of specified OTG timer
#define otg_get_timeout(timer) (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\
Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\
Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\
Rd_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk))
Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\
Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\
Rd_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk))
//! Get the dual-role device state of the internal USB finite state machine of the UOTGHS controller
#define otg_get_fsm_drd_state() (Rd_bitfield(UOTGHS->UOTGHS_FSM, UOTGHS_FSM_DRDSTATE_Msk))

266
Marlin/src/HAL/DUE/usb/usb_protocol.h
View file

@ -108,17 +108,17 @@
* \brief Standard USB requests (bRequest)
*/
enum usb_reqid {
USB_REQ_GET_STATUS = 0,
USB_REQ_CLEAR_FEATURE = 1,
USB_REQ_SET_FEATURE = 3,
USB_REQ_SET_ADDRESS = 5,
USB_REQ_GET_DESCRIPTOR = 6,
USB_REQ_SET_DESCRIPTOR = 7,
USB_REQ_GET_CONFIGURATION = 8,
USB_REQ_SET_CONFIGURATION = 9,
USB_REQ_GET_INTERFACE = 10,
USB_REQ_SET_INTERFACE = 11,
USB_REQ_SYNCH_FRAME = 12,
USB_REQ_GET_STATUS = 0,
USB_REQ_CLEAR_FEATURE = 1,
USB_REQ_SET_FEATURE = 3,
USB_REQ_SET_ADDRESS = 5,
USB_REQ_GET_DESCRIPTOR = 6,
USB_REQ_SET_DESCRIPTOR = 7,
USB_REQ_GET_CONFIGURATION = 8,
USB_REQ_SET_CONFIGURATION = 9,
USB_REQ_GET_INTERFACE = 10,
USB_REQ_SET_INTERFACE = 11,
USB_REQ_SYNCH_FRAME = 12,
};
/**
@ -126,9 +126,9 @@ enum usb_reqid {
*
*/
enum usb_device_status {
USB_DEV_STATUS_BUS_POWERED = 0,
USB_DEV_STATUS_SELF_POWERED = 1,
USB_DEV_STATUS_REMOTEWAKEUP = 2
USB_DEV_STATUS_BUS_POWERED = 0,
USB_DEV_STATUS_SELF_POWERED = 1,
USB_DEV_STATUS_REMOTEWAKEUP = 2
};
/**
@ -136,7 +136,7 @@ enum usb_device_status {
*
*/
enum usb_interface_status {
USB_IFACE_STATUS_RESERVED = 0
USB_IFACE_STATUS_RESERVED = 0
};
/**
@ -144,7 +144,7 @@ enum usb_interface_status {
*
*/
enum usb_endpoint_status {
USB_EP_STATUS_HALTED = 1,
USB_EP_STATUS_HALTED = 1,
};
/**
@ -153,11 +153,11 @@ enum usb_endpoint_status {
* \note valid for SetFeature request.
*/
enum usb_device_feature {
USB_DEV_FEATURE_REMOTE_WAKEUP = 1, //!< Remote wakeup enabled
USB_DEV_FEATURE_TEST_MODE = 2, //!< USB test mode
USB_DEV_FEATURE_OTG_B_HNP_ENABLE = 3,
USB_DEV_FEATURE_OTG_A_HNP_SUPPORT = 4,
USB_DEV_FEATURE_OTG_A_ALT_HNP_SUPPORT = 5
USB_DEV_FEATURE_REMOTE_WAKEUP = 1, //!< Remote wakeup enabled
USB_DEV_FEATURE_TEST_MODE = 2, //!< USB test mode
USB_DEV_FEATURE_OTG_B_HNP_ENABLE = 3,
USB_DEV_FEATURE_OTG_A_HNP_SUPPORT = 4,
USB_DEV_FEATURE_OTG_A_ALT_HNP_SUPPORT = 5
};
/**
@ -166,54 +166,54 @@ enum usb_device_feature {
* \note valid for USB_DEV_FEATURE_TEST_MODE request.
*/
enum usb_device_hs_test_mode {
USB_DEV_TEST_MODE_J = 1,
USB_DEV_TEST_MODE_K = 2,
USB_DEV_TEST_MODE_SE0_NAK = 3,
USB_DEV_TEST_MODE_PACKET = 4,
USB_DEV_TEST_MODE_FORCE_ENABLE = 5,
USB_DEV_TEST_MODE_J = 1,
USB_DEV_TEST_MODE_K = 2,
USB_DEV_TEST_MODE_SE0_NAK = 3,
USB_DEV_TEST_MODE_PACKET = 4,
USB_DEV_TEST_MODE_FORCE_ENABLE = 5,
};
/**
* \brief Standard USB endpoint feature/status flags
*/
enum usb_endpoint_feature {
USB_EP_FEATURE_HALT = 0,
USB_EP_FEATURE_HALT = 0,
};
/**
* \brief Standard USB Test Mode Selectors
*/
enum usb_test_mode_selector {
USB_TEST_J = 0x01,
USB_TEST_K = 0x02,
USB_TEST_SE0_NAK = 0x03,
USB_TEST_PACKET = 0x04,
USB_TEST_FORCE_ENABLE = 0x05,
USB_TEST_J = 0x01,
USB_TEST_K = 0x02,
USB_TEST_SE0_NAK = 0x03,
USB_TEST_PACKET = 0x04,
USB_TEST_FORCE_ENABLE = 0x05,
};
/**
* \brief Standard USB descriptor types
*/
enum usb_descriptor_type {
USB_DT_DEVICE = 1,
USB_DT_CONFIGURATION = 2,
USB_DT_STRING = 3,
USB_DT_INTERFACE = 4,
USB_DT_ENDPOINT = 5,
USB_DT_DEVICE_QUALIFIER = 6,
USB_DT_OTHER_SPEED_CONFIGURATION = 7,
USB_DT_INTERFACE_POWER = 8,
USB_DT_OTG = 9,
USB_DT_IAD = 0x0B,
USB_DT_BOS = 0x0F,
USB_DT_DEVICE_CAPABILITY = 0x10,
USB_DT_DEVICE = 1,
USB_DT_CONFIGURATION = 2,
USB_DT_STRING = 3,
USB_DT_INTERFACE = 4,
USB_DT_ENDPOINT = 5,
USB_DT_DEVICE_QUALIFIER = 6,
USB_DT_OTHER_SPEED_CONFIGURATION = 7,
USB_DT_INTERFACE_POWER = 8,
USB_DT_OTG = 9,
USB_DT_IAD = 0x0B,
USB_DT_BOS = 0x0F,
USB_DT_DEVICE_CAPABILITY = 0x10,
};
/**
* \brief USB Device Capability types
*/
enum usb_capability_type {
USB_DC_USB20_EXTENSION = 0x02,
USB_DC_USB20_EXTENSION = 0x02,
};
/**
@ -221,7 +221,7 @@ enum usb_capability_type {
* To fill bmAttributes field of usb_capa_ext_desc_t structure.
*/
enum usb_capability_extension_attr {
USB_DC_EXT_LPM = 0x00000002,
USB_DC_EXT_LPM = 0x00000002,
};
#define HIRD_50_US 0
@ -254,18 +254,18 @@ enum usb_capability_extension_attr {
* \brief Standard USB endpoint transfer types
*/
enum usb_ep_type {
USB_EP_TYPE_CONTROL = 0x00,
USB_EP_TYPE_ISOCHRONOUS = 0x01,
USB_EP_TYPE_BULK = 0x02,
USB_EP_TYPE_INTERRUPT = 0x03,
USB_EP_TYPE_MASK = 0x03,
USB_EP_TYPE_CONTROL = 0x00,
USB_EP_TYPE_ISOCHRONOUS = 0x01,
USB_EP_TYPE_BULK = 0x02,
USB_EP_TYPE_INTERRUPT = 0x03,
USB_EP_TYPE_MASK = 0x03,
};
/**
* \brief Standard USB language IDs for string descriptors
*/
enum usb_langid {
USB_LANGID_EN_US = 0x0409, //!< English (United States)
USB_LANGID_EN_US = 0x0409, //!< English (United States)
};
/**
@ -308,31 +308,31 @@ COMPILER_PACK_SET(1)
* The data payload of SETUP packets always follows this structure.
*/
typedef struct {
uint8_t bmRequestType;
uint8_t bRequest;
le16_t wValue;
le16_t wIndex;
le16_t wLength;
uint8_t bmRequestType;
uint8_t bRequest;
le16_t wValue;
le16_t wIndex;
le16_t wLength;
} usb_setup_req_t;
/**
* \brief Standard USB device descriptor structure
*/
typedef struct {
uint8_t bLength;
uint8_t bDescriptorType;
le16_t bcdUSB;
uint8_t bDeviceClass;
uint8_t bDeviceSubClass;
uint8_t bDeviceProtocol;
uint8_t bMaxPacketSize0;
le16_t idVendor;
le16_t idProduct;
le16_t bcdDevice;
uint8_t iManufacturer;
uint8_t iProduct;
uint8_t iSerialNumber;
uint8_t bNumConfigurations;
uint8_t bLength;
uint8_t bDescriptorType;
le16_t bcdUSB;
uint8_t bDeviceClass;
uint8_t bDeviceSubClass;
uint8_t bDeviceProtocol;
uint8_t bMaxPacketSize0;
le16_t idVendor;
le16_t idProduct;
le16_t bcdDevice;
uint8_t iManufacturer;
uint8_t iProduct;
uint8_t iSerialNumber;
uint8_t bNumConfigurations;
} usb_dev_desc_t;
/**
@ -344,15 +344,15 @@ typedef struct {
* the device was operating at full speed.)
*/
typedef struct {
uint8_t bLength;
uint8_t bDescriptorType;
le16_t bcdUSB;
uint8_t bDeviceClass;
uint8_t bDeviceSubClass;
uint8_t bDeviceProtocol;
uint8_t bMaxPacketSize0;
uint8_t bNumConfigurations;
uint8_t bReserved;
uint8_t bLength;
uint8_t bDescriptorType;
le16_t bcdUSB;
uint8_t bDeviceClass;
uint8_t bDeviceSubClass;
uint8_t bDeviceProtocol;
uint8_t bMaxPacketSize0;
uint8_t bNumConfigurations;
uint8_t bReserved;
} usb_dev_qual_desc_t;
/**
@ -368,10 +368,10 @@ typedef struct {
* The descriptor type in the GetDescriptor() request is set to BOS.
*/
typedef struct {
uint8_t bLength;
uint8_t bDescriptorType;
le16_t wTotalLength;
uint8_t bNumDeviceCaps;
uint8_t bLength;
uint8_t bDescriptorType;
le16_t wTotalLength;
uint8_t bNumDeviceCaps;
} usb_dev_bos_desc_t;
@ -381,10 +381,10 @@ typedef struct {
* Defines the set of USB 1.1-specific device level capabilities.
*/
typedef struct {
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bDevCapabilityType;
le32_t bmAttributes;
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bDevCapabilityType;
le32_t bmAttributes;
} usb_dev_capa_ext_desc_t;
/**
@ -393,22 +393,22 @@ typedef struct {
* The BOS descriptor and capabilities descriptors for LPM.
*/
typedef struct {
usb_dev_bos_desc_t bos;
usb_dev_capa_ext_desc_t capa_ext;
usb_dev_bos_desc_t bos;
usb_dev_capa_ext_desc_t capa_ext;
} usb_dev_lpm_desc_t;
/**
* \brief Standard USB Interface Association Descriptor structure
*/
typedef struct {
uint8_t bLength; //!< size of this descriptor in bytes
uint8_t bDescriptorType; //!< INTERFACE descriptor type
uint8_t bFirstInterface; //!< Number of interface
uint8_t bInterfaceCount; //!< value to select alternate setting
uint8_t bFunctionClass; //!< Class code assigned by the USB
uint8_t bFunctionSubClass;//!< Sub-class code assigned by the USB
uint8_t bFunctionProtocol;//!< Protocol code assigned by the USB
uint8_t iFunction; //!< Index of string descriptor
uint8_t bLength; //!< size of this descriptor in bytes
uint8_t bDescriptorType; //!< INTERFACE descriptor type
uint8_t bFirstInterface; //!< Number of interface
uint8_t bInterfaceCount; //!< value to select alternate setting
uint8_t bFunctionClass; //!< Class code assigned by the USB
uint8_t bFunctionSubClass;//!< Sub-class code assigned by the USB
uint8_t bFunctionProtocol;//!< Protocol code assigned by the USB
uint8_t iFunction; //!< Index of string descriptor
} usb_association_desc_t;
@ -416,14 +416,14 @@ typedef struct {
* \brief Standard USB configuration descriptor structure
*/
typedef struct {
uint8_t bLength;
uint8_t bDescriptorType;
le16_t wTotalLength;
uint8_t bNumInterfaces;
uint8_t bConfigurationValue;
uint8_t iConfiguration;
uint8_t bmAttributes;
uint8_t bMaxPower;
uint8_t bLength;
uint8_t bDescriptorType;
le16_t wTotalLength;
uint8_t bNumInterfaces;
uint8_t bConfigurationValue;
uint8_t iConfiguration;
uint8_t bmAttributes;
uint8_t bMaxPower;
} usb_conf_desc_t;
@ -438,41 +438,41 @@ typedef struct {
* \brief Standard USB association descriptor structure
*/
typedef struct {
uint8_t bLength; //!< Size of this descriptor in bytes
uint8_t bDescriptorType; //!< Interface descriptor type
uint8_t bFirstInterface; //!< Number of interface
uint8_t bInterfaceCount; //!< value to select alternate setting
uint8_t bFunctionClass; //!< Class code assigned by the USB
uint8_t bFunctionSubClass; //!< Sub-class code assigned by the USB
uint8_t bFunctionProtocol; //!< Protocol code assigned by the USB
uint8_t iFunction; //!< Index of string descriptor
uint8_t bLength; //!< Size of this descriptor in bytes
uint8_t bDescriptorType; //!< Interface descriptor type
uint8_t bFirstInterface; //!< Number of interface
uint8_t bInterfaceCount; //!< value to select alternate setting
uint8_t bFunctionClass; //!< Class code assigned by the USB
uint8_t bFunctionSubClass; //!< Sub-class code assigned by the USB
uint8_t bFunctionProtocol; //!< Protocol code assigned by the USB
uint8_t iFunction; //!< Index of string descriptor
} usb_iad_desc_t;
/**
* \brief Standard USB interface descriptor structure
*/
typedef struct {
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bInterfaceNumber;
uint8_t bAlternateSetting;
uint8_t bNumEndpoints;
uint8_t bInterfaceClass;
uint8_t bInterfaceSubClass;
uint8_t bInterfaceProtocol;
uint8_t iInterface;
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bInterfaceNumber;
uint8_t bAlternateSetting;
uint8_t bNumEndpoints;
uint8_t bInterfaceClass;
uint8_t bInterfaceSubClass;
uint8_t bInterfaceProtocol;
uint8_t iInterface;
} usb_iface_desc_t;
/**
* \brief Standard USB endpoint descriptor structure
*/
typedef struct {
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bEndpointAddress;
uint8_t bmAttributes;
le16_t wMaxPacketSize;
uint8_t bInterval;
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bEndpointAddress;
uint8_t bmAttributes;
le16_t wMaxPacketSize;
uint8_t bInterval;
} usb_ep_desc_t;
@ -480,13 +480,13 @@ typedef struct {
* \brief A standard USB string descriptor structure
*/
typedef struct {
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bLength;
uint8_t bDescriptorType;
} usb_str_desc_t;
typedef struct {
usb_str_desc_t desc;
le16_t string[1];
usb_str_desc_t desc;
le16_t string[1];
} usb_str_lgid_desc_t;
COMPILER_PACK_RESET()

132
Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h
View file

@ -58,42 +58,42 @@
* \name Possible values of class
*/
//@{
#define CDC_CLASS_DEVICE 0x02 //!< USB Communication Device Class
#define CDC_CLASS_COMM 0x02 //!< CDC Communication Class Interface
#define CDC_CLASS_DATA 0x0A //!< CDC Data Class Interface
#define CDC_CLASS_DEVICE 0x02 //!< USB Communication Device Class
#define CDC_CLASS_COMM 0x02 //!< CDC Communication Class Interface
#define CDC_CLASS_DATA 0x0A //!< CDC Data Class Interface
#define CDC_CLASS_MULTI 0xEF //!< CDC Multi-interface Function
//@}
//! \name USB CDC Subclass IDs
//@{
#define CDC_SUBCLASS_DLCM 0x01 //!< Direct Line Control Model
#define CDC_SUBCLASS_ACM 0x02 //!< Abstract Control Model
#define CDC_SUBCLASS_TCM 0x03 //!< Telephone Control Model
#define CDC_SUBCLASS_MCCM 0x04 //!< Multi-Channel Control Model
#define CDC_SUBCLASS_CCM 0x05 //!< CAPI Control Model
#define CDC_SUBCLASS_ETH 0x06 //!< Ethernet Networking Control Model
#define CDC_SUBCLASS_ATM 0x07 //!< ATM Networking Control Model
#define CDC_SUBCLASS_DLCM 0x01 //!< Direct Line Control Model
#define CDC_SUBCLASS_ACM 0x02 //!< Abstract Control Model
#define CDC_SUBCLASS_TCM 0x03 //!< Telephone Control Model
#define CDC_SUBCLASS_MCCM 0x04 //!< Multi-Channel Control Model
#define CDC_SUBCLASS_CCM 0x05 //!< CAPI Control Model
#define CDC_SUBCLASS_ETH 0x06 //!< Ethernet Networking Control Model
#define CDC_SUBCLASS_ATM 0x07 //!< ATM Networking Control Model
//@}
//! \name USB CDC Communication Interface Protocol IDs
//@{
#define CDC_PROTOCOL_V25TER 0x01 //!< Common AT commands
#define CDC_PROTOCOL_V25TER 0x01 //!< Common AT commands
//@}
//! \name USB CDC Data Interface Protocol IDs
//@{
#define CDC_PROTOCOL_I430 0x30 //!< ISDN BRI
#define CDC_PROTOCOL_HDLC 0x31 //!< HDLC
#define CDC_PROTOCOL_TRANS 0x32 //!< Transparent
#define CDC_PROTOCOL_Q921M 0x50 //!< Q.921 management protocol
#define CDC_PROTOCOL_Q921 0x51 //!< Q.931 [sic] Data link protocol
#define CDC_PROTOCOL_Q921TM 0x52 //!< Q.921 TEI-multiplexor
#define CDC_PROTOCOL_V42BIS 0x90 //!< Data compression procedures
#define CDC_PROTOCOL_Q931 0x91 //!< Euro-ISDN protocol control
#define CDC_PROTOCOL_V120 0x92 //!< V.24 rate adaption to ISDN
#define CDC_PROTOCOL_CAPI20 0x93 //!< CAPI Commands
#define CDC_PROTOCOL_HOST 0xFD //!< Host based driver
#define CDC_PROTOCOL_I430 0x30 //!< ISDN BRI
#define CDC_PROTOCOL_HDLC 0x31 //!< HDLC
#define CDC_PROTOCOL_TRANS 0x32 //!< Transparent
#define CDC_PROTOCOL_Q921M 0x50 //!< Q.921 management protocol
#define CDC_PROTOCOL_Q921 0x51 //!< Q.931 [sic] Data link protocol
#define CDC_PROTOCOL_Q921TM 0x52 //!< Q.921 TEI-multiplexor
#define CDC_PROTOCOL_V42BIS 0x90 //!< Data compression procedures
#define CDC_PROTOCOL_Q931 0x91 //!< Euro-ISDN protocol control
#define CDC_PROTOCOL_V120 0x92 //!< V.24 rate adaption to ISDN
#define CDC_PROTOCOL_CAPI20 0x93 //!< CAPI Commands
#define CDC_PROTOCOL_HOST 0xFD //!< Host based driver
/**
* \brief Describes the Protocol Unit Functional Descriptors [sic]
* on Communication Class Interface
@ -103,16 +103,16 @@
//! \name USB CDC Functional Descriptor Types
//@{
#define CDC_CS_INTERFACE 0x24 //!< Interface Functional Descriptor
#define CDC_CS_ENDPOINT 0x25 //!< Endpoint Functional Descriptor
#define CDC_CS_INTERFACE 0x24 //!< Interface Functional Descriptor
#define CDC_CS_ENDPOINT 0x25 //!< Endpoint Functional Descriptor
//@}
//! \name USB CDC Functional Descriptor Subtypes
//@{
#define CDC_SCS_HEADER 0x00 //!< Header Functional Descriptor
#define CDC_SCS_CALL_MGMT 0x01 //!< Call Management
#define CDC_SCS_ACM 0x02 //!< Abstract Control Management
#define CDC_SCS_UNION 0x06 //!< Union Functional Descriptor
#define CDC_SCS_HEADER 0x00 //!< Header Functional Descriptor
#define CDC_SCS_CALL_MGMT 0x01 //!< Call Management
#define CDC_SCS_ACM 0x02 //!< Abstract Control Management
#define CDC_SCS_UNION 0x06 //!< Union Functional Descriptor
//@}
//! \name USB CDC Request IDs
@ -171,36 +171,36 @@ COMPILER_PACK_SET(1)
//! CDC Header Functional Descriptor
typedef struct {
uint8_t bFunctionLength;
uint8_t bDescriptorType;
uint8_t bDescriptorSubtype;
le16_t bcdCDC;
uint8_t bFunctionLength;
uint8_t bDescriptorType;
uint8_t bDescriptorSubtype;
le16_t bcdCDC;
} usb_cdc_hdr_desc_t;
//! CDC Call Management Functional Descriptor
typedef struct {
uint8_t bFunctionLength;
uint8_t bDescriptorType;
uint8_t bDescriptorSubtype;
uint8_t bmCapabilities;
uint8_t bDataInterface;
uint8_t bFunctionLength;
uint8_t bDescriptorType;
uint8_t bDescriptorSubtype;
uint8_t bmCapabilities;
uint8_t bDataInterface;
} usb_cdc_call_mgmt_desc_t;
//! CDC ACM Functional Descriptor
typedef struct {
uint8_t bFunctionLength;
uint8_t bDescriptorType;
uint8_t bDescriptorSubtype;
uint8_t bmCapabilities;
uint8_t bFunctionLength;
uint8_t bDescriptorType;
uint8_t bDescriptorSubtype;
uint8_t bmCapabilities;
} usb_cdc_acm_desc_t;
//! CDC Union Functional Descriptor
typedef struct {
uint8_t bFunctionLength;
uint8_t bDescriptorType;
uint8_t bDescriptorSubtype;
uint8_t bMasterInterface;
uint8_t bSlaveInterface0;
uint8_t bFunctionLength;
uint8_t bDescriptorType;
uint8_t bDescriptorSubtype;
uint8_t bMasterInterface;
uint8_t bSlaveInterface0;
} usb_cdc_union_desc_t;
@ -235,24 +235,24 @@ typedef struct {
//@{
//! Line Coding structure
typedef struct {
le32_t dwDTERate;
uint8_t bCharFormat;
uint8_t bParityType;
uint8_t bDataBits;
le32_t dwDTERate;
uint8_t bCharFormat;
uint8_t bParityType;
uint8_t bDataBits;
} usb_cdc_line_coding_t;
//! Possible values of bCharFormat
enum cdc_char_format {
CDC_STOP_BITS_1 = 0, //!< 1 stop bit
CDC_STOP_BITS_1_5 = 1, //!< 1.5 stop bits
CDC_STOP_BITS_2 = 2, //!< 2 stop bits
CDC_STOP_BITS_1 = 0, //!< 1 stop bit
CDC_STOP_BITS_1_5 = 1, //!< 1.5 stop bits
CDC_STOP_BITS_2 = 2, //!< 2 stop bits
};
//! Possible values of bParityType
enum cdc_parity {
CDC_PAR_NONE = 0, //!< No parity
CDC_PAR_ODD = 1, //!< Odd parity
CDC_PAR_EVEN = 2, //!< Even parity
CDC_PAR_MARK = 3, //!< Parity forced to 0 (space)
CDC_PAR_SPACE = 4, //!< Parity forced to 1 (mark)
CDC_PAR_NONE = 0, //!< No parity
CDC_PAR_ODD = 1, //!< Odd parity
CDC_PAR_EVEN = 2, //!< Even parity
CDC_PAR_MARK = 3, //!< Parity forced to 0 (space)
CDC_PAR_SPACE = 4, //!< Parity forced to 1 (mark)
};
//@}
@ -262,7 +262,7 @@ enum cdc_parity {
//! Control signal structure
typedef struct {
uint16_t value;
uint16_t value;
} usb_cdc_control_signal_t;
//! \name Possible values in usb_cdc_control_signal_t
@ -283,11 +283,11 @@ typedef struct {
//@{
typedef struct {
uint8_t bmRequestType;
uint8_t bNotification;
le16_t wValue;
le16_t wIndex;
le16_t wLength;
uint8_t bmRequestType;
uint8_t bNotification;
le16_t wValue;
le16_t wIndex;
le16_t wLength;
} usb_cdc_notify_msg_t;
//! \name USB CDC serial state
@ -295,8 +295,8 @@ typedef struct {
//! Hardware handshake support (cdc spec 1.1 chapter 6.3.5)
typedef struct {
usb_cdc_notify_msg_t header;
le16_t value;
usb_cdc_notify_msg_t header;
le16_t value;
} usb_cdc_notify_serial_state_t;
//! \name Possible values in usb_cdc_notify_serial_state_t

64
Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
View file

@ -59,7 +59,7 @@
* \name Possible Class value
*/
//@{
#define MSC_CLASS 0x08
#define MSC_CLASS 0x08
//@}
/**
@ -71,12 +71,12 @@
* operating systems like Windows XP.
*/
//@{
#define MSC_SUBCLASS_RBC 0x01 //!< Reduced Block Commands
#define MSC_SUBCLASS_ATAPI 0x02 //!< CD/DVD devices
#define MSC_SUBCLASS_QIC_157 0x03 //!< Tape devices
#define MSC_SUBCLASS_UFI 0x04 //!< Floppy disk drives
#define MSC_SUBCLASS_SFF_8070I 0x05 //!< Floppy disk drives
#define MSC_SUBCLASS_TRANSPARENT 0x06 //!< Determined by INQUIRY
#define MSC_SUBCLASS_RBC 0x01 //!< Reduced Block Commands
#define MSC_SUBCLASS_ATAPI 0x02 //!< CD/DVD devices
#define MSC_SUBCLASS_QIC_157 0x03 //!< Tape devices
#define MSC_SUBCLASS_UFI 0x04 //!< Floppy disk drives
#define MSC_SUBCLASS_SFF_8070I 0x05 //!< Floppy disk drives
#define MSC_SUBCLASS_TRANSPARENT 0x06 //!< Determined by INQUIRY
//@}
/**
@ -84,9 +84,9 @@
* \note Only the BULK protocol should be used in new designs.
*/
//@{
#define MSC_PROTOCOL_CBI 0x00 //!< Command/Bulk/Interrupt
#define MSC_PROTOCOL_CBI_ALT 0x01 //!< W/o command completion
#define MSC_PROTOCOL_BULK 0x50 //!< Bulk-only
#define MSC_PROTOCOL_CBI 0x00 //!< Command/Bulk/Interrupt
#define MSC_PROTOCOL_CBI_ALT 0x01 //!< W/o command completion
#define MSC_PROTOCOL_BULK 0x50 //!< Bulk-only
//@}
@ -94,8 +94,8 @@
* \brief MSC USB requests (bRequest)
*/
enum usb_reqid_msc {
USB_REQ_MSC_BULK_RESET = 0xFF, //!< Mass Storage Reset
USB_REQ_MSC_GET_MAX_LUN = 0xFE //!< Get Max LUN
USB_REQ_MSC_BULK_RESET = 0xFF, //!< Mass Storage Reset
USB_REQ_MSC_GET_MAX_LUN = 0xFE //!< Get Max LUN
};
@ -106,20 +106,20 @@ COMPILER_PACK_SET(1)
*/
//@{
struct usb_msc_cbw {
le32_t dCBWSignature; //!< Must contain 'USBC'
le32_t dCBWTag; //!< Unique command ID
le32_t dCBWDataTransferLength; //!< Number of bytes to transfer
uint8_t bmCBWFlags; //!< Direction in bit 7
uint8_t bCBWLUN; //!< Logical Unit Number
uint8_t bCBWCBLength; //!< Number of valid CDB bytes
uint8_t CDB[16]; //!< SCSI Command Descriptor Block
le32_t dCBWSignature; //!< Must contain 'USBC'
le32_t dCBWTag; //!< Unique command ID
le32_t dCBWDataTransferLength; //!< Number of bytes to transfer
uint8_t bmCBWFlags; //!< Direction in bit 7
uint8_t bCBWLUN; //!< Logical Unit Number
uint8_t bCBWCBLength; //!< Number of valid CDB bytes
uint8_t CDB[16]; //!< SCSI Command Descriptor Block
};
#define USB_CBW_SIGNATURE 0x55534243 //!< dCBWSignature value
#define USB_CBW_DIRECTION_IN (1<<7) //!< Data from device to host
#define USB_CBW_DIRECTION_OUT (0<<7) //!< Data from host to device
#define USB_CBW_LUN_MASK 0x0F //!< Valid bits in bCBWLUN
#define USB_CBW_LEN_MASK 0x1F //!< Valid bits in bCBWCBLength
#define USB_CBW_SIGNATURE 0x55534243 //!< dCBWSignature value
#define USB_CBW_DIRECTION_IN (1<<7) //!< Data from device to host
#define USB_CBW_DIRECTION_OUT (0<<7) //!< Data from host to device
#define USB_CBW_LUN_MASK 0x0F //!< Valid bits in bCBWLUN
#define USB_CBW_LEN_MASK 0x1F //!< Valid bits in bCBWCBLength
//@}
@ -128,16 +128,16 @@ struct usb_msc_cbw {
*/
//@{
struct usb_msc_csw {
le32_t dCSWSignature; //!< Must contain 'USBS'
le32_t dCSWTag; //!< Same as dCBWTag
le32_t dCSWDataResidue; //!< Number of bytes not transferred
uint8_t bCSWStatus; //!< Status code
le32_t dCSWSignature; //!< Must contain 'USBS'
le32_t dCSWTag; //!< Same as dCBWTag
le32_t dCSWDataResidue; //!< Number of bytes not transferred
uint8_t bCSWStatus; //!< Status code
};
#define USB_CSW_SIGNATURE 0x55534253 //!< dCSWSignature value
#define USB_CSW_STATUS_PASS 0x00 //!< Command Passed
#define USB_CSW_STATUS_FAIL 0x01 //!< Command Failed
#define USB_CSW_STATUS_PE 0x02 //!< Phase Error
#define USB_CSW_SIGNATURE 0x55534253 //!< dCSWSignature value
#define USB_CSW_STATUS_PASS 0x00 //!< Command Passed
#define USB_CSW_STATUS_FAIL 0x01 //!< Command Failed
#define USB_CSW_STATUS_PE 0x02 //!< Phase Error
//@}
COMPILER_PACK_RESET()

12
buildroot/share/PlatformIO/variants/marlin_maple_CHITU_F103/board/board.h
View file

@ -100,12 +100,12 @@
/*
* SDIO Pins
*/
#define BOARD_SDIO_D0 PC8
#define BOARD_SDIO_D1 PC9
#define BOARD_SDIO_D2 PC10
#define BOARD_SDIO_D3 PC11
#define BOARD_SDIO_CLK PC12
#define BOARD_SDIO_CMD PD2
#define BOARD_SDIO_D0 PC8
#define BOARD_SDIO_D1 PC9
#define BOARD_SDIO_D2 PC10
#define BOARD_SDIO_D3 PC11
#define BOARD_SDIO_CLK PC12
#define BOARD_SDIO_CMD PD2
/* Pin aliases: these give the GPIO port/bit for each pin as an
* enum. These are optional, but recommended. They make it easier to

12
buildroot/share/PlatformIO/variants/marlin_maple_MEEB_3DP/board/board.h
View file

@ -100,12 +100,12 @@
/*
* SDIO Pins
*/
#define BOARD_SDIO_D0 PC8
#define BOARD_SDIO_D1 PC9
#define BOARD_SDIO_D2 PC10
#define BOARD_SDIO_D3 PC11
#define BOARD_SDIO_CLK PC12
#define BOARD_SDIO_CMD PD2
#define BOARD_SDIO_D0 PC8
#define BOARD_SDIO_D1 PC9
#define BOARD_SDIO_D2 PC10
#define BOARD_SDIO_D3 PC11
#define BOARD_SDIO_CLK PC12
#define BOARD_SDIO_CMD PD2
/* Pin aliases: these give the GPIO port/bit for each pin as an
* enum. These are optional, but recommended. They make it easier to