From 74474c8a818745f1324aa5e22e59c361b4dff609 Mon Sep 17 00:00:00 2001 From: ellensp <530024+ellensp@users.noreply.github.com> Date: Sat, 26 Nov 2022 19:21:47 +1300 Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A7=20Fix=20TPARA=20(=E2=80=A6SCARA,?= =?UTF-8?q?=20DELTA)=20settings=20(#25016)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration.h | 32 +++++++++---------- .../src/feature/bedlevel/ubl/ubl_motion.cpp | 4 +-- Marlin/src/inc/Conditionals_post.h | 6 ++-- Marlin/src/inc/SanityCheck.h | 2 ++ Marlin/src/module/scara.cpp | 2 +- Marlin/src/module/settings.cpp | 6 +--- 6 files changed, 26 insertions(+), 26 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 87a98298a5..7f625c04f8 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -879,7 +879,7 @@ //#define POLARGRAPH #if ENABLED(POLARGRAPH) #define POLARGRAPH_MAX_BELT_LEN 1035.0 - #define POLAR_SEGMENTS_PER_SECOND 5 + #define DEFAULT_SEGMENTS_PER_SECOND 5 #endif // @section delta @@ -891,28 +891,28 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DEFAULT_SEGMENTS_PER_SECOND 200 // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu - // uncomment to add three points calibration menu option. + // Add three-point calibration to the MarlinUI menu. // See http://minow.blogspot.com/index.html#4918805519571907051 //#define DELTA_CALIBRATION_MENU - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + // G33 Delta Auto-Calibration. Enable EEPROM_SETTINGS to store results. //#define DELTA_AUTO_CALIBRATION - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) + // Default number of probe points : n*n (1 -> 7) #define DELTA_CALIBRATION_DEFAULT_POINTS 4 #endif + // NOTE: All values for DELTA_* values MUST be floating point, so always have a decimal point in them + #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing + // Step size for paper-test probing #define PROBE_MANUALLY_STEP 0.05 // (mm) #endif @@ -957,7 +957,7 @@ //#define MP_SCARA #if EITHER(MORGAN_SCARA, MP_SCARA) // If movement is choppy try lowering this value - #define SCARA_SEGMENTS_PER_SECOND 200 + #define DEFAULT_SEGMENTS_PER_SECOND 200 // Length of inner and outer support arms. Measure arm lengths precisely. #define SCARA_LINKAGE_1 150 // (mm) @@ -993,18 +993,18 @@ // Enable for TPARA kinematics and configure below //#define AXEL_TPARA #if ENABLED(AXEL_TPARA) - #define DEBUG_ROBOT_KINEMATICS - #define ROBOT_SEGMENTS_PER_SECOND 200 + #define DEBUG_TPARA_KINEMATICS + #define DEFAULT_SEGMENTS_PER_SECOND 200 // Length of inner and outer support arms. Measure arm lengths precisely. - #define ROBOT_LINKAGE_1 120 // (mm) - #define ROBOT_LINKAGE_2 120 // (mm) + #define TPARA_LINKAGE_1 120 // (mm) + #define TPARA_LINKAGE_2 120 // (mm) // SCARA tower offset (position of Tower relative to bed zero position) // This needs to be reasonably accurate as it defines the printbed position in the SCARA space. - #define ROBOT_OFFSET_X 0 // (mm) - #define ROBOT_OFFSET_Y 0 // (mm) - #define ROBOT_OFFSET_Z 0 // (mm) + #define TPARA_OFFSET_X 0 // (mm) + #define TPARA_OFFSET_Y 0 // (mm) + #define TPARA_OFFSET_Z 0 // (mm) #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp index 56c48650f1..96c30a0efd 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp @@ -336,9 +336,9 @@ #if IS_SCARA #define DELTA_SEGMENT_MIN_LENGTH 0.25 // SCARA minimum segment size is 0.25mm #elif ENABLED(DELTA) - #define DELTA_SEGMENT_MIN_LENGTH 0.10 // mm (still subject to DELTA_SEGMENTS_PER_SECOND) + #define DELTA_SEGMENT_MIN_LENGTH 0.10 // mm (still subject to DEFAULT_SEGMENTS_PER_SECOND) #elif ENABLED(POLARGRAPH) - #define DELTA_SEGMENT_MIN_LENGTH 0.10 // mm (still subject to DELTA_SEGMENTS_PER_SECOND) + #define DELTA_SEGMENT_MIN_LENGTH 0.10 // mm (still subject to DEFAULT_SEGMENTS_PER_SECOND) #else // CARTESIAN #ifdef LEVELED_SEGMENT_LENGTH #define DELTA_SEGMENT_MIN_LENGTH LEVELED_SEGMENT_LENGTH diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 1e0daeb567..f6e76d1a6e 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -275,10 +275,12 @@ */ #if IS_SCARA #undef SLOWDOWN - #if DISABLED(AXEL_TPARA) + #if ENABLED(AXEL_TPARA) + #define SCARA_PRINTABLE_RADIUS (TPARA_LINKAGE_1 + TPARA_LINKAGE_2) + #else #define QUICK_HOME + #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif - #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif /** diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 7f663791f8..2d8c7ca1c6 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -654,6 +654,8 @@ #error "SHOW_SD_PERCENT is now SHOW_PROGRESS_PERCENT." #elif defined(EXTRA_LIN_ADVANCE_K) #error "EXTRA_LIN_ADVANCE_K is now ADVANCE_K_EXTRA." +#elif defined(POLAR_SEGMENTS_PER_SECOND) || defined(DELTA_SEGMENTS_PER_SECOND) || defined(SCARA_SEGMENTS_PER_SECOND) || defined(TPARA_SEGMENTS_PER_SECOND) + #error "(POLAR|DELTA|SCARA|TPARA)_SEGMENTS_PER_SECOND is now DEFAULT_SEGMENTS_PER_SECOND." #endif // L64xx stepper drivers have been removed diff --git a/Marlin/src/module/scara.cpp b/Marlin/src/module/scara.cpp index bc42b85fbe..4c42ace884 100644 --- a/Marlin/src/module/scara.cpp +++ b/Marlin/src/module/scara.cpp @@ -37,7 +37,7 @@ #include "../MarlinCore.h" #endif -float segments_per_second = TERN(AXEL_TPARA, TPARA_SEGMENTS_PER_SECOND, SCARA_SEGMENTS_PER_SECOND); +float segments_per_second = DEFAULT_SEGMENTS_PER_SECOND; #if EITHER(MORGAN_SCARA, MP_SCARA) diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp index a090b140ad..5d1ef71d66 100644 --- a/Marlin/src/module/settings.cpp +++ b/Marlin/src/module/settings.cpp @@ -3044,11 +3044,7 @@ void MarlinSettings::reset() { // #if IS_KINEMATIC - segments_per_second = ( - TERN_(DELTA, DELTA_SEGMENTS_PER_SECOND) - TERN_(IS_SCARA, SCARA_SEGMENTS_PER_SECOND) - TERN_(POLARGRAPH, POLAR_SEGMENTS_PER_SECOND) - ); + segments_per_second = DEFAULT_SEGMENTS_PER_SECOND; #if ENABLED(DELTA) const abc_float_t adj = DELTA_ENDSTOP_ADJ, dta = DELTA_TOWER_ANGLE_TRIM, ddr = DELTA_DIAGONAL_ROD_TRIM_TOWER; delta_height = DELTA_HEIGHT;