✨ Creality E3 Free-runs Silent Motherboard (#25636)
This commit is contained in:
Bob Kuhn
GitHub
parent
b90133813a
commit
7ab63cde62
|
|
@ -454,16 +454,17 @@
|
|||
#define BOARD_ARTILLERY_RUBY 5238 // Artillery Ruby (STM32F401RC)
|
||||
#define BOARD_FYSETC_SPIDER_V2_2 5239 // FYSETC Spider V2.2 (STM32F446VE)
|
||||
#define BOARD_CREALITY_V24S1_301F4 5240 // Creality v2.4.S1_301F4 (STM32F401RC) as found in the Ender-3 S1 F4
|
||||
#define BOARD_OPULO_LUMEN_REV4 5241 // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
|
||||
#define BOARD_FYSETC_SPIDER_KING407 5242 // FYSETC Spider King407 (STM32F407ZG)
|
||||
#define BOARD_MKS_SKIPR_V1 5243 // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
|
||||
#define BOARD_TRONXY_V10 5244 // TRONXY V10 (STM32F446ZE)
|
||||
#define BOARD_CREALITY_F401RE 5245 // Creality CR4NS200141C13 (STM32F401RE) as found in the Ender-5 S1
|
||||
#define BOARD_BLACKPILL_CUSTOM 5246 // Custom board based on STM32F401CDU6.
|
||||
#define BOARD_I3DBEEZ9_V1 5247 // I3DBEEZ9 V1 (STM32F407ZG)
|
||||
#define BOARD_MELLOW_FLY_E3_V2 5248 // Mellow Fly E3 V2 (STM32F407VG)
|
||||
#define BOARD_FYSETC_CHEETAH_V30 5249 // FYSETC Cheetah V3.0 (STM32F446RC)
|
||||
#define BOARD_BLACKBEEZMINI_V1 5250 // BlackBeezMini V1 (STM32F401CCU6)
|
||||
#define BOARD_CREALITY_CR4NTXXC10 5241 // Creality E3 Free-runs Silent Motherboard (STM32F401RET6)
|
||||
#define BOARD_OPULO_LUMEN_REV4 5242 // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
|
||||
#define BOARD_FYSETC_SPIDER_KING407 5243 // FYSETC Spider King407 (STM32F407ZG)
|
||||
#define BOARD_MKS_SKIPR_V1 5244 // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
|
||||
#define BOARD_TRONXY_V10 5245 // TRONXY V10 (STM32F446ZE)
|
||||
#define BOARD_CREALITY_F401RE 5246 // Creality CR4NS200141C13 (STM32F401RE) as found in the Ender-5 S1
|
||||
#define BOARD_BLACKPILL_CUSTOM 5247 // Custom board based on STM32F401CDU6.
|
||||
#define BOARD_I3DBEEZ9_V1 5248 // I3DBEEZ9 V1 (STM32F407ZG)
|
||||
#define BOARD_MELLOW_FLY_E3_V2 5249 // Mellow Fly E3 V2 (STM32F407VG)
|
||||
#define BOARD_FYSETC_CHEETAH_V30 5250 // FYSETC Cheetah V3.0 (STM32F446RC)
|
||||
#define BOARD_BLACKBEEZMINI_V1 5251 // BlackBeezMini V1 (STM32F401CCU6)
|
||||
|
||||
//
|
||||
// ARM Cortex-M7
|
||||
|
|
|
|||
|
|
@ -220,7 +220,7 @@
|
|||
#if HAS_WIRED_LCD
|
||||
|
||||
//#define LCD_PINS_RS 13
|
||||
//#define LCD_PINS_ENABLE 17
|
||||
//#define LCD_PINS_EN 17
|
||||
//#define LCD_PINS_D4 16
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
|
|
|||
|
|
@ -796,6 +796,8 @@
|
|||
#include "stm32f4/pins_ARTILLERY_RUBY.h" // STM32F4 env:Artillery_Ruby
|
||||
#elif MB(CREALITY_V24S1_301F4)
|
||||
#include "stm32f4/pins_CREALITY_V24S1_301F4.h" // STM32F4 env:STM32F401RC_creality env:STM32F401RC_creality_nobootloader env:STM32F401RC_creality_jlink env:STM32F401RC_creality_stlink
|
||||
#elif MB(CREALITY_CR4NTXXC10)
|
||||
#include "stm32f4/pins_CREALITY_CR4NTXXC10.h" // STM32F4 env:STM32F401RE_freeruns env:STM32F401RE_freeruns_jlink env:STM32F401RE_freeruns_stlink
|
||||
#elif MB(OPULO_LUMEN_REV4)
|
||||
#include "stm32f4/pins_OPULO_LUMEN_REV4.h" // STM32F4 env:Opulo_Lumen_REV4
|
||||
#elif MB(FYSETC_SPIDER_KING407)
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@
|
|||
#define SPINDLE_LASER_PWM_PIN PC0 // Bed FET
|
||||
#define SPINDLE_LASER_ENA_PIN PC0 // FET 1
|
||||
#define SPINDLE_DIR_PIN PC0 // FET 4
|
||||
#define LASER_SOFT_PWM_PIN PC0
|
||||
//#define LASER_SOFT_PWM_PIN PC0
|
||||
#endif
|
||||
|
||||
#include "pins_CREALITY_V4.h"
|
||||
|
|
|
|||
261
Marlin/src/pins/stm32f4/pins_CREALITY_CR4NTXXC10.h
Normal file
261
Marlin/src/pins/stm32f4/pins_CREALITY_CR4NTXXC10.h
Normal file
|
|
@ -0,0 +1,261 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Creality CREALITY_CR4NTXXC10 (STM32F401RET6) board pin assignments
|
||||
*
|
||||
* Sold as "E3 Free-runs Silent Motherboard"
|
||||
*/
|
||||
#include "env_validate.h"
|
||||
|
||||
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "CR4NT220622C10 only supports one hotend / E-stepper."
|
||||
#endif
|
||||
|
||||
#if !AXIS_DRIVER_TYPE_X(TMC2209) || !AXIS_DRIVER_TYPE_Y(TMC2209) || !AXIS_DRIVER_TYPE_Z(TMC2209) || !AXIS_DRIVER_TYPE_E0(TMC2209)
|
||||
#error "This board has onboard TMC2209 drivers for X, Y, Z, and E0."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "CR4NT220622C10"
|
||||
#endif
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME "Ender-3 Series"
|
||||
#endif
|
||||
#define BOARD_WEBSITE_URL "www.creality.com"
|
||||
|
||||
#define BOARD_NO_NATIVE_USB
|
||||
//#undef DISABLE_DEBUG // DISABLE_(DEBUG|JTAG) is not supported for STM32F4.
|
||||
//#define DISABLE_JTAG
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
|
||||
//#define SDCARD_EEPROM_EMULATION
|
||||
#undef NO_EEPROM_SELECTED
|
||||
#endif
|
||||
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
#define IIC_EEPROM_SDA PA11
|
||||
#define IIC_EEPROM_SCL PA12
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2K (24C16)
|
||||
#elif ENABLED(SDCARD_EEPROM_EMULATION)
|
||||
#define MARLIN_EEPROM_SIZE 0x800 // 2K
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PB0 // BLTouch PWM-OUT PIN (TOUCH pins in the schematic have changed)
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PA5
|
||||
#define Y_STOP_PIN PA6
|
||||
|
||||
#if ENABLED(BLTOUCH)
|
||||
#define Z_MIN_PIN PB1 // BLTouch IN PIN (TOUCH pins in the schematic have changed)
|
||||
#define Z_MAX_PIN PA7
|
||||
#else
|
||||
#define Z_STOP_PIN PA7 // Z-axis limit switch
|
||||
#endif
|
||||
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN PB1 // BLTouch IN
|
||||
#endif
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PA4 // "Pulled-high"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC3
|
||||
#define X_STEP_PIN PC2
|
||||
#define X_DIR_PIN PB9
|
||||
|
||||
#define Y_ENABLE_PIN PC3
|
||||
#define Y_STEP_PIN PB8
|
||||
#define Y_DIR_PIN PB7
|
||||
|
||||
#define Z_ENABLE_PIN PC3
|
||||
#define Z_STEP_PIN PB6
|
||||
#define Z_DIR_PIN PB5
|
||||
|
||||
#define E0_ENABLE_PIN PC3
|
||||
#define E0_STEP_PIN PB4
|
||||
#define E0_DIR_PIN PB3
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC5 // TH1
|
||||
#define TEMP_BED_PIN PC4 // TB1
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA1 // HEATER1
|
||||
#define HEATER_BED_PIN PB10 // HOT BED
|
||||
|
||||
#ifndef FAN0_PIN
|
||||
#define FAN0_PIN PA0 // FAN
|
||||
#endif
|
||||
#if PIN_EXISTS(FAN0)
|
||||
#define FAN_SOFT_PWM
|
||||
#endif
|
||||
|
||||
#if HAS_TMC_UART
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
|
||||
/**
|
||||
* TMC2208/TMC2209 stepper drivers
|
||||
*
|
||||
* Hardware serial communication ports.
|
||||
* If undefined software serial is used according to the pins below
|
||||
*/
|
||||
#define X_HARDWARE_SERIAL Serial6
|
||||
#define Y_HARDWARE_SERIAL Serial6
|
||||
#define Z_HARDWARE_SERIAL Serial6
|
||||
#define E0_HARDWARE_SERIAL Serial6
|
||||
|
||||
#ifndef X_SLAVE_ADDRESS
|
||||
#define X_SLAVE_ADDRESS 0
|
||||
#endif
|
||||
#ifndef Y_SLAVE_ADDRESS
|
||||
#define Y_SLAVE_ADDRESS 1
|
||||
#endif
|
||||
#ifndef Z_SLAVE_ADDRESS
|
||||
#define Z_SLAVE_ADDRESS 2
|
||||
#endif
|
||||
#ifndef E0_SLAVE_ADDRESS
|
||||
#define E0_SLAVE_ADDRESS 3
|
||||
#endif
|
||||
|
||||
// Software serial
|
||||
|
||||
#define X_SERIAL_TX_PIN PC6
|
||||
#define X_SERIAL_RX_PIN PC7
|
||||
|
||||
#define Y_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||
#define Y_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||
|
||||
#define Z_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||
#define Z_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||
|
||||
#define E0_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||
#define E0_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||
|
||||
#define E1_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||
#define E1_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||
|
||||
#define X_DIAG_PIN PC13
|
||||
#define Y_DIAG_PIN PC14
|
||||
#define Z_DIAG_PIN PC15
|
||||
#define E0_DIAG_PIN PA15
|
||||
|
||||
#endif // HAS_TMC_UART
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SD_DETECT_PIN PC1
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#define ONBOARD_SPI_DEVICE 1
|
||||
//#define ONBOARD_SD_CS_PIN PA4 // SDSS
|
||||
#define SDIO_SUPPORT
|
||||
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
#if ENABLED(RET6_12864_LCD)
|
||||
// RET6 12864 LCD
|
||||
#define LCD_PINS_RS PB12
|
||||
#define LCD_PINS_EN PB15
|
||||
#define LCD_PINS_D4 PB13
|
||||
|
||||
#define BTN_ENC PB2
|
||||
#define BTN_EN1 PA2
|
||||
#define BTN_EN2 PB14
|
||||
|
||||
#ifndef HAS_PIN_27_BOARD
|
||||
#define BEEPER_PIN PC0
|
||||
#endif
|
||||
|
||||
#elif ENABLED(VET6_12864_LCD)
|
||||
// VET6 12864 LCD
|
||||
#define LCD_PINS_RS PA4
|
||||
//#define LCD_PINS_EN PA7
|
||||
#define LCD_PINS_D4 PA5
|
||||
|
||||
#define BTN_ENC PC5
|
||||
#define BTN_EN1 PB10
|
||||
#define BTN_EN2 PA6
|
||||
|
||||
#else
|
||||
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the CREALITY_CR4NTXXC10 controller."
|
||||
#endif
|
||||
|
||||
#elif ENABLED(DWIN_CREALITY_LCD)
|
||||
|
||||
// RET6 DWIN ENCODER LCD
|
||||
#define BTN_ENC PB14
|
||||
#define BTN_EN1 PB15
|
||||
#define BTN_EN2 PB12
|
||||
|
||||
//#define LCD_LED_PIN PB2
|
||||
#ifndef BEEPER_PIN
|
||||
#define BEEPER_PIN PB13
|
||||
#undef SPEAKER
|
||||
#endif
|
||||
|
||||
#elif ENABLED(DWIN_VET6_CREALITY_LCD)
|
||||
|
||||
// VET6 DWIN ENCODER LCD
|
||||
#define BTN_ENC PA6
|
||||
//#define BTN_EN1 PA7
|
||||
#define BTN_EN2 PA4
|
||||
|
||||
#define BEEPER_PIN PA5
|
||||
|
||||
#endif
|
||||
|
||||
//
|
||||
// M3/M4/M5 - Spindle/Laser Control
|
||||
//
|
||||
#if HAS_CUTTER
|
||||
//#undef HEATER_0_PIN
|
||||
//#undef HEATER_BED_PIN
|
||||
//#undef FAN0_PIN
|
||||
#define SPINDLE_LASER_ENA_PIN PC0 // FET 1
|
||||
#define SPINDLE_LASER_PWM_PIN PC0 // Bed FET
|
||||
#define SPINDLE_DIR_PIN PC0 // FET 4
|
||||
//#define LASER_SOFT_PWM_PIN PC0
|
||||
#endif
|
||||
|
|
@ -309,7 +309,7 @@
|
|||
|
||||
#define LCD_SDSS EXP2_07_PIN
|
||||
|
||||
#define LCD_PINS_ENABLE EXP1_08_PIN
|
||||
#define LCD_PINS_EN EXP1_08_PIN
|
||||
#define LCD_PINS_D4 EXP1_06_PIN
|
||||
|
||||
#if ENABLED(FYSETC_MINI_12864)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,65 @@
|
|||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m4",
|
||||
"extra_flags": "-DSTM32F401xx",
|
||||
"f_cpu": "84000000L",
|
||||
"hwids": [
|
||||
[
|
||||
"0x1EAF",
|
||||
"0x0003"
|
||||
],
|
||||
[
|
||||
"0x0483",
|
||||
"0x3748"
|
||||
]
|
||||
],
|
||||
"ldscript": "ldscript.ld",
|
||||
"mcu": "stm32f401ret6",
|
||||
"variant": "MARLIN_STM32F401RE_FREERUNS"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F401RE",
|
||||
"openocd_target": "stm32f4x",
|
||||
"svd_path": "STM32F40x.svd",
|
||||
"tools": {
|
||||
"stlink": {
|
||||
"server": {
|
||||
"arguments": [
|
||||
"-f",
|
||||
"scripts/interface/stlink.cfg",
|
||||
"-c",
|
||||
"transport select hla_swd",
|
||||
"-f",
|
||||
"scripts/target/stm32f4x.cfg",
|
||||
"-c",
|
||||
"reset_config none"
|
||||
],
|
||||
"executable": "bin/openocd",
|
||||
"package": "tool-openocd"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"stm32cube"
|
||||
],
|
||||
"name": "STM32F401RE (96k RAM. 512k Flash)",
|
||||
"upload": {
|
||||
"disable_flushing": false,
|
||||
"maximum_ram_size": 98304,
|
||||
"maximum_size": 524288,
|
||||
"protocol": "stlink",
|
||||
"protocols": [
|
||||
"stlink",
|
||||
"dfu",
|
||||
"jlink"
|
||||
],
|
||||
"require_upload_port": true,
|
||||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f401re.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
@ -0,0 +1,252 @@
|
|||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2019, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
* Automatically generated from STM32F401R[(B-C)|(D-E)]Tx.xml
|
||||
*/
|
||||
#include "Arduino.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
/* =====
|
||||
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||
* If you change them, you will have to know what you do
|
||||
* =====
|
||||
*/
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No DAC ***
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
|
||||
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
|
||||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** PWM ***
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_PWM[] = {
|
||||
//{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
//{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
//{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
//{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
//{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SERIAL ***
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
//{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
//{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
//{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
//{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
//{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No CAN ***
|
||||
|
||||
//*** No ETHERNET ***
|
||||
|
||||
//*** No QUADSPI ***
|
||||
|
||||
//*** USB ***
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_USB_OTG_FS[] = {
|
||||
#ifndef ARDUINO_CoreBoard_F401RC
|
||||
{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||
{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||
{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||
#endif
|
||||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No USB_OTG_HS ***
|
||||
|
||||
//*** SD ***
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SD[] = {
|
||||
{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
|
||||
{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
|
||||
{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
|
||||
{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
|
||||
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
|
||||
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
|
||||
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
|
||||
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
|
||||
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
|
||||
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/* SYS_WKUP */
|
||||
#ifdef PWR_WAKEUP_PIN1
|
||||
SYS_WKUP1 = PA_0,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN2
|
||||
SYS_WKUP2 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN3
|
||||
SYS_WKUP3 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN4
|
||||
SYS_WKUP4 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN5
|
||||
SYS_WKUP5 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN6
|
||||
SYS_WKUP6 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN7
|
||||
SYS_WKUP7 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN8
|
||||
SYS_WKUP8 = NC,
|
||||
#endif
|
||||
/* USB */
|
||||
#ifdef USBCON
|
||||
USB_OTG_FS_SOF = PA_8,
|
||||
USB_OTG_FS_VBUS = PA_9,
|
||||
USB_OTG_FS_ID = PA_10,
|
||||
USB_OTG_FS_DM = PA_11,
|
||||
USB_OTG_FS_DP = PA_12,
|
||||
#endif
|
||||
|
|
@ -0,0 +1,495 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf.h
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_CUSTOM
|
||||
#define __STM32F4xx_HAL_CONF_CUSTOM
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
#define HAL_CRC_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
#define HAL_IWDG_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
//#define HAL_PCD_MODULE_ENABLED // Automatically added if any type of USB is enabled, as in Arduino IDE. (STM32 v3.10700.191028)
|
||||
|
||||
//#define HAL_CAN_MODULE_ENABLED
|
||||
//#define HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
//#define HAL_CEC_MODULE_ENABLED
|
||||
//#define HAL_CRYP_MODULE_ENABLED
|
||||
//#define HAL_DAC_MODULE_ENABLED
|
||||
//#define HAL_DCMI_MODULE_ENABLED
|
||||
//#define HAL_DMA2D_MODULE_ENABLED
|
||||
//#define HAL_ETH_MODULE_ENABLED
|
||||
//#define HAL_NAND_MODULE_ENABLED
|
||||
//#define HAL_NOR_MODULE_ENABLED
|
||||
//#define HAL_PCCARD_MODULE_ENABLED
|
||||
//#define HAL_SRAM_MODULE_ENABLED
|
||||
//#define HAL_SDRAM_MODULE_ENABLED
|
||||
//#define HAL_HASH_MODULE_ENABLED
|
||||
//#define HAL_EXTI_MODULE_ENABLED
|
||||
//#define HAL_SMBUS_MODULE_ENABLED
|
||||
//#define HAL_I2S_MODULE_ENABLED
|
||||
//#define HAL_LTDC_MODULE_ENABLED
|
||||
//#define HAL_DSI_MODULE_ENABLED
|
||||
//#define HAL_QSPI_MODULE_ENABLED
|
||||
//#define HAL_RNG_MODULE_ENABLED
|
||||
//#define HAL_SAI_MODULE_ENABLED
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
//#define HAL_UART_MODULE_ENABLED
|
||||
//#define HAL_USART_MODULE_ENABLED
|
||||
//#define HAL_IRDA_MODULE_ENABLED
|
||||
//#define HAL_SMARTCARD_MODULE_ENABLED
|
||||
//#define HAL_WWDG_MODULE_ENABLED
|
||||
//#define HAL_HCD_MODULE_ENABLED
|
||||
//#define HAL_FMPI2C_MODULE_ENABLED
|
||||
//#define HAL_SPDIFRX_MODULE_ENABLED
|
||||
//#define HAL_DFSDM_MODULE_ENABLED
|
||||
//#define HAL_LPTIM_MODULE_ENABLED
|
||||
//#define HAL_MMC_MODULE_ENABLED
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#ifndef HSE_VALUE
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#ifndef HSE_STARTUP_TIMEOUT
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#ifndef HSI_VALUE
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#ifndef LSI_VALUE
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#ifndef LSE_VALUE
|
||||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#ifndef LSE_STARTUP_TIMEOUT
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#ifndef EXTERNAL_CLOCK_VALUE
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#if !defined (VDD_VALUE)
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#endif
|
||||
#if !defined (TICK_INT_PRIORITY)
|
||||
#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */
|
||||
#endif
|
||||
#if !defined (USE_RTOS)
|
||||
#define USE_RTOS 0U
|
||||
#endif
|
||||
#if !defined (PREFETCH_ENABLE)
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#endif
|
||||
#if !defined (INSTRUCTION_CACHE_ENABLE)
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#endif
|
||||
#if !defined (DATA_CACHE_ENABLE)
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
#endif
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
#ifndef USE_SPI_CRC
|
||||
#define USE_SPI_CRC 0U
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,186 @@
|
|||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
** File : ldscript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F401RETx Device with
|
||||
** 512KByte FLASH, 96KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** Copyright (c) 2014 Ac6
|
||||
**
|
||||
** Redistribution and use in source and binary forms, with or without modification,
|
||||
** are permitted provided that the following conditions are met:
|
||||
** 1. Redistributions of source code must retain the above copyright notice,
|
||||
** this list of conditions and the following disclaimer.
|
||||
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
** this list of conditions and the following disclaimer in the documentation
|
||||
** and/or other materials provided with the distribution.
|
||||
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||
** may be used to endorse or promote products derived from this software
|
||||
** without specific prior written permission.
|
||||
**
|
||||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20017FFB; /* end of RAM */
|
||||
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text ALIGN(4):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
|
@ -0,0 +1,238 @@
|
|||
/*
|
||||
Copyright (c) 2011 Arduino. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "pins_arduino.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// Digital PinName array
|
||||
const PinName digitalPin[] = {
|
||||
PA_0, // Digital pin 0
|
||||
PA_1, // Digital pin 1
|
||||
PA_2, // Digital pin 2
|
||||
PA_3, // Digital pin 3
|
||||
PA_4, // Digital pin 4
|
||||
PA_5, // Digital pin 5
|
||||
PA_6, // Digital pin 6
|
||||
PA_7, // Digital pin 7
|
||||
PA_8, // Digital pin 8
|
||||
PA_9, // Digital pin 9
|
||||
PA_10, // Digital pin 10
|
||||
PA_11, // Digital pin 11
|
||||
PA_12, // Digital pin 12
|
||||
PA_13, // Digital pin 13
|
||||
PA_14, // Digital pin 14
|
||||
PA_15, // Digital pin 15
|
||||
|
||||
PB_0, // Digital pin 16
|
||||
PB_1, // Digital pin 17
|
||||
PB_2, // Digital pin 18
|
||||
PB_3, // Digital pin 19
|
||||
PB_4, // Digital pin 20
|
||||
PB_5, // Digital pin 21
|
||||
PB_6, // Digital pin 22
|
||||
PB_7, // Digital pin 23
|
||||
PB_8, // Digital pin 24
|
||||
PB_9, // Digital pin 25
|
||||
PB_10, // Digital pin 26
|
||||
PB_12, // Digital pin 27
|
||||
PB_13, // Digital pin 28
|
||||
PB_14, // Digital pin 29
|
||||
PB_15, // Digital pin 30
|
||||
|
||||
PC_0, // Digital pin 31
|
||||
PC_1, // Digital pin 32
|
||||
PC_2, // Digital pin 33
|
||||
PC_3, // Digital pin 34
|
||||
PC_4, // Digital pin 35
|
||||
PC_5, // Digital pin 36
|
||||
PC_6, // Digital pin 37
|
||||
PC_7, // Digital pin 38
|
||||
PC_8, // Digital pin 39
|
||||
PC_9, // Digital pin 40
|
||||
PC_10, // Digital pin 41
|
||||
PC_11, // Digital pin 42
|
||||
PC_12, // Digital pin 43
|
||||
PC_13, // Digital pin 44
|
||||
PC_14, // Digital pin 45
|
||||
PC_15, // Digital pin 46
|
||||
|
||||
PD_2, // Digital pin 47
|
||||
|
||||
PH_0, // Digital pin 48, used by the external oscillator
|
||||
PH_1 // Digital pin 49, used by the external oscillator
|
||||
};
|
||||
|
||||
// Analog (Ax) pin number array
|
||||
const uint32_t analogInputPin[] = {
|
||||
0, // A0, PA0
|
||||
1, // A1, PA1
|
||||
2, // A2, PA2
|
||||
3, // A3, PA3
|
||||
4, // A4, PA4
|
||||
5, // A5, PA5
|
||||
6, // A6, PA6
|
||||
7, // A7, PA7
|
||||
16, // A8, PB0
|
||||
17, // A9, PB1
|
||||
31, // A10, PC0
|
||||
32, // A11, PC1
|
||||
33, // A12, PC2
|
||||
34, // A13, PC3
|
||||
35, // A14, PC4
|
||||
36 // A15, PC5
|
||||
};
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
static uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
||||
|
||||
// Enable HSE oscillator and activate PLL with HSE as source
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
if (bypass == 0) {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
|
||||
} else {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
|
||||
}
|
||||
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000L; // Expects an 8 MHz external clock by default. Redefine HSE_VALUE if not
|
||||
RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4)
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> OK for USB
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
/*
|
||||
if (bypass == 0)
|
||||
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
|
||||
else
|
||||
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
|
||||
*/
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSI) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSI(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
||||
|
||||
// Enable HSI oscillator and activate PLL with HSI as source
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
|
||||
RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4)
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> freq is ok but not precise enough
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
|
||||
WEAK void SystemClock_Config(void)
|
||||
{
|
||||
/* 1- If fail try to start with HSE and external xtal */
|
||||
if (SetSysClock_PLL_HSE(0) == 0) {
|
||||
/* 2- Try to start with HSE and external clock */
|
||||
if (SetSysClock_PLL_HSE(1) == 0) {
|
||||
/* 3- If fail start with HSI clock */
|
||||
if (SetSysClock_PLL_HSI() == 0) {
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
}
|
||||
/* Output clock on MCO2 pin(PC9) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4);
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
@ -0,0 +1,154 @@
|
|||
/*
|
||||
Copyright (c) 2011 Arduino. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_ARDUINO_STM32_
|
||||
#define _VARIANT_ARDUINO_STM32_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
|
||||
// | DIGITAL | ANALOG | USART | TWI | SPI | SPECIAL |
|
||||
// |---------|--------|-----------|----------|------------------------|-----------|
|
||||
#define PA0 0 // | 0 | A0 | | | | |
|
||||
#define PA1 1 // | 1 | A1 | | | | |
|
||||
#define PA2 2 // | 2 | A2 | USART2_TX | | | |
|
||||
#define PA3 3 // | 3 | A3 | USART2_RX | | | |
|
||||
#define PA4 4 // | 4 | A4 | | | SPI1_SS, (SPI3_SS) | |
|
||||
#define PA5 5 // | 5 | A5 | | | SPI1_SCK | |
|
||||
#define PA6 6 // | 6 | A6 | | | SPI1_MISO | |
|
||||
#define PA7 7 // | 7 | A7 | | | SPI1_MOSI | |
|
||||
#define PA8 8 // | 8 | | | TWI3_SCL | | |
|
||||
#define PA9 9 // | 9 | | USART1_TX | | | |
|
||||
#define PA10 10 // | 10 | | USART1_RX | | | |
|
||||
#define PA11 11 // | 11 | | USART6_TX | | | |
|
||||
#define PA12 12 // | 12 | | USART6_RX | | | |
|
||||
#define PA13 13 // | 13 | | | | | SWD_SWDIO |
|
||||
#define PA14 14 // | 14 | | | | | SWD_SWCLK |
|
||||
#define PA15 15 // | 15 | | | | SPI3_SS, (SPI1_SS) | |
|
||||
// |---------|--------|-----------|----------|------------------------|-----------|
|
||||
#define PB0 16 // | 16 | A8 | | | | |
|
||||
#define PB1 17 // | 17 | A9 | | | | |
|
||||
#define PB2 18 // | 18 | | | | | BOOT1 |
|
||||
#define PB3 19 // | 19 | | | TWI2_SDA | SPI3_SCK, (SPI1_SCK) | |
|
||||
#define PB4 20 // | 20 | | | TWI3_SDA | SPI3_MISO, (SPI1_MISO) | |
|
||||
#define PB5 21 // | 21 | | | | SPI3_MOSI, (SPI1_MOSI) | |
|
||||
#define PB6 22 // | 22 | | USART1_TX | TWI1_SCL | | |
|
||||
#define PB7 23 // | 23 | | USART1_RX | TWI1_SDA | | |
|
||||
#define PB8 24 // | 24 | | | TWI1_SCL | | |
|
||||
#define PB9 25 // | 25 | | | TWI1_SDA | SPI2_SS | |
|
||||
#define PB10 26 // | 26 | | | TWI2_SCL | SPI2_SCK | |
|
||||
#define PB12 27 // | 27 | | | | SPI2_SS | |
|
||||
#define PB13 28 // | 28 | | | | SPI2_SCK | |
|
||||
#define PB14 29 // | 29 | | | | SPI2_MISO | |
|
||||
#define PB15 30 // | 30 | | | | SPI2_MOSI | |
|
||||
// |---------|--------|-----------|----------|------------------------|-----------|
|
||||
#define PC0 31 // | 31 | A10 | | | | |
|
||||
#define PC1 32 // | 32 | A11 | | | | |
|
||||
#define PC2 33 // | 33 | A12 | | | SPI2_MISO | |
|
||||
#define PC3 34 // | 34 | A13 | | | SPI2_MOSI | |
|
||||
#define PC4 35 // | 35 | A14 | | | | |
|
||||
#define PC5 36 // | 36 | A15 | | | | |
|
||||
#define PC6 37 // | 37 | | USART6_TX | | | |
|
||||
#define PC7 38 // | 38 | | USART6_RX | | | |
|
||||
#define PC8 39 // | 39 | | | | | |
|
||||
#define PC9 40 // | 40 | | | TWI3_SDA | | |
|
||||
#define PC10 41 // | 41 | | | | SPI3_SCK | |
|
||||
#define PC11 42 // | 42 | | | | SPI3_MISO | |
|
||||
#define PC12 43 // | 43 | | | | SPI3_MOSI | |
|
||||
#define PC13 44 // | 44 | | | | | |
|
||||
#define PC14 45 // | 45 | | | | | OSC32_IN |
|
||||
#define PC15 46 // | 46 | | | | | OSC32_OUT |
|
||||
// |---------|--------|-----------|----------|------------------------|-----------|
|
||||
#define PD2 47 // | 47 | | | | | |
|
||||
// |---------|--------|-----------|----------|------------------------|-----------|
|
||||
#define PH0 48 // | 48 | | | | | OSC_IN |
|
||||
#define PH1 49 // | 49 | | | | | OSC_OUT |
|
||||
// |---------|--------|-----------|----------|------------------------|-----------|
|
||||
|
||||
// This must be a literal
|
||||
#define NUM_DIGITAL_PINS 50
|
||||
#define NUM_ANALOG_INPUTS 16
|
||||
|
||||
// SPI definitions
|
||||
#define PIN_SPI_SS PA4
|
||||
#define PIN_SPI_SS1 PA4
|
||||
#define PIN_SPI_MOSI PA7
|
||||
#define PIN_SPI_MISO PA6
|
||||
#define PIN_SPI_SCK PA5
|
||||
|
||||
|
||||
// Timer Definitions
|
||||
#define TIMER_TONE TIM2
|
||||
#define TIMER_SERVO TIM5
|
||||
#define TIMER_SERIAL TIM11
|
||||
|
||||
// UART Definitions
|
||||
//#define ENABLE_HWSERIAL1 done automatically by the #define SERIAL_UART_INSTANCE below
|
||||
#define ENABLE_HWSERIAL2
|
||||
#define ENABLE_HWSERIAL6
|
||||
|
||||
|
||||
// Define here Serial instance number to map on Serial generic name (if not already used by SerialUSB)
|
||||
#define SERIAL_UART_INSTANCE 1 //1 for Serial = Serial1 (USART1)
|
||||
|
||||
// Default pin used for 'Serial' instance
|
||||
// Mandatory for Firmata
|
||||
#define PIN_SERIAL_RX PA10
|
||||
#define PIN_SERIAL_TX PA9
|
||||
|
||||
// Used when the user instantiates a hardware Serial using its peripheral name.
|
||||
// Example: HardwareSerial mySerial(USART3);
|
||||
// will use PIN_SERIAL3_RX and PIN_SERIAL3_TX if defined.
|
||||
#define PIN_SERIAL1_RX PA10
|
||||
#define PIN_SERIAL1_TX PA9
|
||||
#define PIN_SERIAL2_RX PA3
|
||||
#define PIN_SERIAL2_TX PA2
|
||||
#define PIN_SERIAL6_RX PC7
|
||||
#define PIN_SERIAL6_TX PC6
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#define SERIAL_PORT_HARDWARE_OPEN Serial2
|
||||
#endif
|
||||
|
||||
#endif /* _VARIANT_ARDUINO_STM32_ */
|
||||
|
|
@ -737,6 +737,33 @@ extends = env:STM32F401RE_creality
|
|||
debug_tool = stlink
|
||||
upload_protocol = stlink
|
||||
|
||||
#
|
||||
# STM32F401RE_freeruns Creality E3 Free-runs Silent Motherboard
|
||||
#
|
||||
[env:STM32F401RE_freeruns]
|
||||
extends = stm32_variant
|
||||
board = genericSTM32F401RE
|
||||
board_build.variant = marlin_STM32F401RE_freeruns
|
||||
board_build.offset = 0x10000
|
||||
board_upload.offset_address = 0x08010000
|
||||
build_flags = ${stm32_variant.build_flags} -DMCU_STM32F401RE -DSTM32F4
|
||||
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
|
||||
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
|
||||
build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC
|
||||
extra_scripts = ${stm32_variant.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/random-bin.py
|
||||
monitor_speed = 115200
|
||||
|
||||
[env:STM32F401RE_freeruns_jlink]
|
||||
extends = env:STM32F401RE_freeruns
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
||||
[env:STM32F401RE_freeruns_stlink]
|
||||
extends = env:STM32F401RE_freeruns
|
||||
debug_tool = stlink
|
||||
upload_protocol = stlink
|
||||
|
||||
#
|
||||
# BigTree SKR mini E3 V3.0.1 (STM32F401RCT6 ARM Cortex-M4)
|
||||
#
|
||||
|
|
|
|||
Loading…
Reference in a new issue