✨ MINGDA D2 D301 v1.0 (#26340)
This commit is contained in:
Luiz Eduardo Carneiro
GitHub
parent
884a3249fe
commit
7f59b65fc8
|
|
@ -399,6 +399,7 @@
|
|||
#define BOARD_SOVOL_V131 5067 // Sovol V1.3.1 (GD32F103RE)
|
||||
#define BOARD_TRIGORILLA_V006 5068 // Trigorilla V0.0.6 (GD32F103RE)
|
||||
#define BOARD_KEDI_CONTROLLER_V1_2 5069 // EDUTRONICS Kedi Controller V1.2 (STM32F103RC)
|
||||
#define BOARD_MD_D301 5070 // Mingda D2 DZ301 V1.0 (STM32F103ZE)
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
|
|
|||
|
|
@ -698,6 +698,8 @@
|
|||
#include "gd32f1/pins_TRIGORILLA_V006.h" // GD32F1 env:trigorilla_v006
|
||||
#elif MB(KEDI_CONTROLLER_V1_2)
|
||||
#include "stm32f1/pins_KEDI_CONTROLLER_V1_2.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple
|
||||
#elif MB(MD_D301)
|
||||
#include "stm32f1/pins_MD_D301.h" // STM32F1 env:mingda_d301 env:mingda_d301_maple
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
|
|
|||
225
Marlin/src/pins/stm32f1/pins_MD_D301.h
Normal file
225
Marlin/src/pins/stm32f1/pins_MD_D301.h
Normal file
|
|
@ -0,0 +1,225 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
/**
|
||||
* Mingda D2 (DZ301 V1.0 STM32F103ZET6) board pin assignments
|
||||
*/
|
||||
|
||||
#define BOARD_INFO_NAME "MD DZ301 V1.0"
|
||||
|
||||
#define DISABLE_DEBUG
|
||||
#define DISABLE_JTAG
|
||||
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (512) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
|
||||
/**
|
||||
* This board works with this SERIAL_PORT_* configuration
|
||||
* #define SERIAL_PORT 3
|
||||
* #define BAUDRATE 115200
|
||||
* #define SERIAL_PORT_2 -1
|
||||
*/
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PB0
|
||||
|
||||
//
|
||||
// Z Probe must be this pin
|
||||
//
|
||||
#define Z_MIN_PROBE_PIN PB1
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PF12
|
||||
#define X_MAX_PIN PF11
|
||||
#define Y_MIN_PIN PF14
|
||||
#define Y_MAX_PIN PF13
|
||||
#ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
#define Z_MIN_PIN PB1
|
||||
#else
|
||||
#define Z_MIN_PIN PG0
|
||||
#endif
|
||||
#define Z_MAX_PIN PF15
|
||||
|
||||
//
|
||||
// Filament Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PG1
|
||||
#endif
|
||||
|
||||
//
|
||||
// Power Supply Control
|
||||
//
|
||||
#ifndef PS_ON_PIN
|
||||
#define PS_ON_PIN PA1
|
||||
#endif
|
||||
|
||||
//
|
||||
// Backup Power Supply
|
||||
//
|
||||
#ifndef POWER_LOSS_PIN
|
||||
#define POWER_LOSS_PIN PA0
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PD3
|
||||
#define X_STEP_PIN PD2
|
||||
#define X_DIR_PIN PC10
|
||||
|
||||
#define Y_ENABLE_PIN PC12
|
||||
#define Y_STEP_PIN PA10
|
||||
#define Y_DIR_PIN PA9
|
||||
|
||||
#define Z_ENABLE_PIN PC9
|
||||
#define Z_STEP_PIN PG8
|
||||
#define Z_DIR_PIN PG7
|
||||
|
||||
#define E0_ENABLE_PIN PD13
|
||||
#define E0_STEP_PIN PD12
|
||||
#define E0_DIR_PIN PD11
|
||||
|
||||
#define Z2_ENABLE_PIN PG5
|
||||
#define Z2_STEP_PIN PG4
|
||||
#define Z2_DIR_PIN PG3
|
||||
|
||||
/**
|
||||
* TMC2208/TMC2209 stepper drivers
|
||||
*/
|
||||
#if HAS_TMC_UART
|
||||
//
|
||||
// Software serial
|
||||
//
|
||||
#define X_SERIAL_TX_PIN PD6
|
||||
#define X_SERIAL_RX_PIN PD6
|
||||
|
||||
#define Y_SERIAL_TX_PIN PC11
|
||||
#define Y_SERIAL_RX_PIN PC11
|
||||
|
||||
#define Z_SERIAL_TX_PIN PA8
|
||||
#define Z_SERIAL_RX_PIN PA8
|
||||
|
||||
#define E0_SERIAL_TX_PIN PG2
|
||||
#define E0_SERIAL_RX_PIN PG2
|
||||
|
||||
#define Z2_SERIAL_TX_PIN PG6
|
||||
#define Z2_SERIAL_RX_PIN PG6
|
||||
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC4
|
||||
#define TEMP_BED_PIN PC5
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC6
|
||||
#define HEATER_BED_PIN PC8
|
||||
#define FAN0_PIN PC7
|
||||
|
||||
//
|
||||
// USB connect control
|
||||
//
|
||||
#define USB_CONNECT_PIN PA15
|
||||
#define USB_CONNECT_INVERTING false
|
||||
|
||||
//
|
||||
// SD Support
|
||||
//
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION LCD
|
||||
#endif
|
||||
|
||||
#define SD_DETECT_PIN PE3
|
||||
|
||||
#define ONBOARD_SPI_DEVICE 1 // SPI1
|
||||
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
||||
#define SDSS ONBOARD_SD_CS_PIN
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define LED_BLUE_PIN PF11
|
||||
#define LED_RED_PIN PF13
|
||||
|
||||
#define BEEPER_PIN PG11
|
||||
#define LED_PIN PG9
|
||||
|
||||
#define NEOPIXEL_PIN PB9
|
||||
|
||||
/**
|
||||
* Note: Mingda screens use various TFT controllers.
|
||||
* If the screen stays white, disable 'LCD_RESET_PIN'
|
||||
* to let the bootloader init the screen.
|
||||
*/
|
||||
|
||||
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
|
||||
#define DOGLCD_SCK -1
|
||||
|
||||
//
|
||||
// TFT with FSMC interface
|
||||
//
|
||||
#if HAS_FSMC_TFT
|
||||
#define TOUCH_CS_PIN PB6 // SPI2_NSS
|
||||
#define TOUCH_SCK_PIN PB3 // SPI2_SCK
|
||||
#define TOUCH_MOSI_PIN PB5 // SPI2_MOSI
|
||||
#define TOUCH_MISO_PIN PB4 // SPI2_MISO
|
||||
#define TOUCH_INT_PIN PB7 // PenIRQ coming from XPT2046
|
||||
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define LCD_BACKLIGHT_PIN PG10
|
||||
#define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
|
||||
#define FSMC_CS_PIN PD7 // FSMC_NE1
|
||||
#define FSMC_RS_PIN PE2 // A23 Register. Only one address needed
|
||||
#define FSMC_DMA_DEV DMA1
|
||||
#define FSMC_DMA_CHANNEL DMA_CH4
|
||||
|
||||
#define TFT_CS_PIN FSMC_CS_PIN
|
||||
#define TFT_RS_PIN FSMC_RS_PIN
|
||||
|
||||
// Buffer for Color UI
|
||||
#define TFT_BUFFER_WORDS 3200
|
||||
#endif
|
||||
|
||||
#define SPI_FLASH
|
||||
#if ENABLED(SPI_FLASH)
|
||||
#define SPI_FLASH_SIZE 0x1000000 // 16MB
|
||||
#define SPI_FLASH_CS_PIN PB12
|
||||
#define SPI_FLASH_MOSI_PIN PB15
|
||||
#define SPI_FLASH_MISO_PIN PB14
|
||||
#define SPI_FLASH_SCK_PIN PB13
|
||||
#endif
|
||||
14
buildroot/share/PlatformIO/ldscripts/md301.ld
Normal file
14
buildroot/share/PlatformIO/ldscripts/md301.ld
Normal file
|
|
@ -0,0 +1,14 @@
|
|||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40
|
||||
rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
|
|
@ -403,3 +403,19 @@ extra_scripts = ${STM32F1_maple.extra_scripts}
|
|||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
||||
#
|
||||
# Mingda D2 DZ301 V1.0 (STM32F103ZE)
|
||||
#
|
||||
[env:mingda_d301_maple]
|
||||
extends = STM32F1_maple
|
||||
board = genericSTM32F103ZE
|
||||
board_build.address = 0x08007000
|
||||
board_upload.maximum_size = 524288
|
||||
board_build.ldscript = md301.ld
|
||||
board_build.variant = MARLIN_F103Zx
|
||||
build_flags = ${STM32F1_maple.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14
|
||||
-DSTM32_FLASH_SIZE=512 -DHAVE_SW_SERIAL -DSS_TIMER=4
|
||||
-DUSART_RX_BUF_SIZE=256 -DUSART_TX_BUF_SIZE=256 -DUSE_USB_COMPOSITE
|
||||
-DTONE_TIMER=3 -DTONE_CHANNEL=3
|
||||
-DSTM32F1xx -DSTM32_XL_DENSITY
|
||||
|
|
|
|||
|
|
@ -482,3 +482,14 @@ board = genericSTM32F103VE
|
|||
board_build.variant = MARLIN_F103Vx
|
||||
build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=TIM1
|
||||
board_upload.maximum_size = 499712
|
||||
|
||||
#
|
||||
# Mingda D2 DZ301 V1.0 (STM32F103ZE)
|
||||
#
|
||||
[env:mingda_d301]
|
||||
extends = stm32_variant
|
||||
board = genericSTM32F103ZE
|
||||
board_build.variant = MARLIN_F103Zx
|
||||
board_build.offset = 0x7000
|
||||
board_upload.offset_address = 0x08007000
|
||||
build_flags = ${stm32_variant.build_flags} -DSTM32F1xx
|
||||
|
|
|
|||
Loading…
Reference in a new issue