From 84ab088b4093c997d3a3e005ca90bfd756839299 Mon Sep 17 00:00:00 2001 From: Victor Oliveira Date: Tue, 29 Dec 2020 02:16:38 -0300 Subject: [PATCH] USB FD via native USB Host + MSC (#20571) --- Marlin/Configuration_adv.h | 14 ++- Marlin/src/HAL/STM32/usb_host.cpp | 117 ++++++++++++++++++ Marlin/src/HAL/STM32/usb_host.h | 60 +++++++++ Marlin/src/inc/Conditionals_adv.h | 4 + Marlin/src/inc/SanityCheck.h | 6 +- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h | 12 +- Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h | 3 + .../pins/stm32f4/pins_BTT_SKR_PRO_common.h | 3 + .../src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h | 1 + .../src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h | 4 + .../sd/usb_flashdrive/Sd2Card_FlashDrive.cpp | 18 ++- .../sd/usb_flashdrive/Sd2Card_FlashDrive.h | 41 +++--- platformio.ini | 50 +++++++- 13 files changed, 300 insertions(+), 33 deletions(-) create mode 100644 Marlin/src/HAL/STM32/usb_host.cpp create mode 100644 Marlin/src/HAL/STM32/usb_host.h diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 6b1febc8f5..990eb05144 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1326,9 +1326,6 @@ */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - /** * USB Host Shield Library * @@ -1339,7 +1336,18 @@ * is less tested and is known to interfere with Servos. * [1] This requires USB_INTR_PIN to be interrupt-capable. */ + //#define USE_UHS2_USB //#define USE_UHS3_USB + + /** + * Native USB Host supported by some boards (USB OTG) + */ + //#define USE_OTG_USB_HOST + + #if DISABLED(USE_OTG_USB_HOST) + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + #endif #endif /** diff --git a/Marlin/src/HAL/STM32/usb_host.cpp b/Marlin/src/HAL/STM32/usb_host.cpp new file mode 100644 index 0000000000..ed743361e6 --- /dev/null +++ b/Marlin/src/HAL/STM32/usb_host.cpp @@ -0,0 +1,117 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) + +#include "../../inc/MarlinConfig.h" + +#if BOTH(USE_OTG_USB_HOST, USBHOST) + +#include "usb_host.h" +#include "../shared/Marduino.h" +#include "usbh_core.h" +#include "usbh_msc.h" + +USBH_HandleTypeDef hUsbHost; +USBHost usb; +BulkStorage bulk(&usb); + +static void USBH_UserProcess(USBH_HandleTypeDef *phost, uint8_t id) { + switch(id) { + case HOST_USER_SELECT_CONFIGURATION: + //SERIAL_ECHOLNPGM("APPLICATION_SELECT_CONFIGURATION"); + break; + case HOST_USER_DISCONNECTION: + //SERIAL_ECHOLNPGM("APPLICATION_DISCONNECT"); + //usb.setUsbTaskState(USB_STATE_RUNNING); + break; + case HOST_USER_CLASS_ACTIVE: + //SERIAL_ECHOLNPGM("APPLICATION_READY"); + usb.setUsbTaskState(USB_STATE_RUNNING); + break; + case HOST_USER_CONNECTION: + break; + default: + break; + } +} + +bool USBHost::start() { + if (USBH_Init(&hUsbHost, USBH_UserProcess, TERN(USE_USB_HS_IN_FS, HOST_HS, HOST_FS)) != USBH_OK) { + SERIAL_ECHOLNPGM("Error: USBH_Init"); + return false; + } + if (USBH_RegisterClass(&hUsbHost, USBH_MSC_CLASS) != USBH_OK) { + SERIAL_ECHOLNPGM("Error: USBH_RegisterClass"); + return false; + } + if (USBH_Start(&hUsbHost) != USBH_OK) { + SERIAL_ECHOLNPGM("Error: USBH_Start"); + return false; + } + return true; +} + +void USBHost::Task() { + USBH_Process(&hUsbHost); +} + +uint8_t USBHost::getUsbTaskState() { + return usb_task_state; +} + +void USBHost::setUsbTaskState(uint8_t state) { + usb_task_state = state; + if (usb_task_state == USB_STATE_RUNNING) { + MSC_LUNTypeDef info; + USBH_MSC_GetLUNInfo(&hUsbHost, usb.lun, &info); + capacity = info.capacity.block_nbr / 2000; + block_size = info.capacity.block_size; + block_count = info.capacity.block_nbr; + // SERIAL_ECHOLNPAIR("info.capacity.block_nbr : %ld\n", info.capacity.block_nbr); + // SERIAL_ECHOLNPAIR("info.capacity.block_size: %d\n", info.capacity.block_size); + // SERIAL_ECHOLNPAIR("capacity : %d MB\n", capacity); + } +}; + +bool BulkStorage::LUNIsGood(uint8_t t) { + return USBH_MSC_IsReady(&hUsbHost) && USBH_MSC_UnitIsReady(&hUsbHost, t); +} + +uint32_t BulkStorage::GetCapacity(uint8_t lun) { + return usb->block_count; +} + +uint16_t BulkStorage::GetSectorSize(uint8_t lun) { + return usb->block_size; +} + +uint8_t BulkStorage::Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf) { + return USBH_MSC_Read(&hUsbHost, lun, addr, buf, blocks) != USBH_OK; +} + +uint8_t BulkStorage::Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t * buf) { + return USBH_MSC_Write(&hUsbHost, lun, addr, const_cast (buf), blocks) != USBH_OK; +} + +#endif // USE_OTG_USB_HOST && USBHOST +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC diff --git a/Marlin/src/HAL/STM32/usb_host.h b/Marlin/src/HAL/STM32/usb_host.h new file mode 100644 index 0000000000..c0001c0d75 --- /dev/null +++ b/Marlin/src/HAL/STM32/usb_host.h @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include + +typedef enum { + USB_STATE_INIT, + USB_STATE_ERROR, + USB_STATE_RUNNING, +} usb_state_t; + +class USBHost { +public: + bool start(); + void Task(); + uint8_t getUsbTaskState(); + void setUsbTaskState(uint8_t state); + uint8_t regRd(uint8_t reg) { return 0x0; }; + uint8_t usb_task_state = USB_STATE_INIT; + uint8_t lun = 0; + uint32_t capacity = 0; + uint16_t block_size = 0; + uint32_t block_count = 0; +}; + +class BulkStorage { +public: + BulkStorage(USBHost *usb) : usb(usb) {}; + + bool LUNIsGood(uint8_t t); + uint32_t GetCapacity(uint8_t lun); + uint16_t GetSectorSize(uint8_t lun); + uint8_t Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf); + uint8_t Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t * buf); + + USBHost *usb; +}; + +extern USBHost usb; +extern BulkStorage bulk; diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index 93f912e5c5..dda0298740 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -386,6 +386,10 @@ #define HOMING_BUMP_MM { 0, 0, 0 } #endif +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && NONE(USE_OTG_USB_HOST, USE_UHS3_USB) + #define USE_UHS2_USB +#endif + /** * Driver Timings (in nanoseconds) * NOTE: Driver timing order is longest-to-shortest duration. diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 6121c5ed13..62c954c899 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -2912,10 +2912,14 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #error "PRINTCOUNTER requires EEPROM_SETTINGS." #endif -#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PINS_EXIST(USB_CS, USB_INTR) +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PINS_EXIST(USB_CS, USB_INTR) && DISABLED(USE_OTG_USB_HOST) #error "USB_CS_PIN and USB_INTR_PIN are required for USB_FLASH_DRIVE_SUPPORT." #endif +#if ENABLED(USE_OTG_USB_HOST) && !defined(HAS_OTG_USB_HOST_SUPPORT) + #error "The current board does not support USE_OTG_USB_HOST." +#endif + #if ENABLED(SD_FIRMWARE_UPDATE) && !defined(__AVR_ATmega2560__) #error "SD_FIRMWARE_UPDATE requires an ATmega2560-based (Arduino Mega) board." #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h index e6a1e92999..b3cfe5b6ba 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h @@ -52,6 +52,13 @@ #define SPI_DEVICE 2 +// +// Servos +// +#ifndef SERVO0_PIN + #define SERVO0_PIN PA8 // Enable BLTOUCH support on IO0 (WIFI connector) +#endif + // // Limit Switches // @@ -91,6 +98,7 @@ #ifndef DEFAULT_PWM_MOTOR_CURRENT #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 } #endif + // // Temperature Sensors // @@ -111,10 +119,6 @@ #define POWER_LOSS_PIN PA2 // PW_DET #define PS_ON_PIN PA3 // PW_OFF -#ifndef SERVO0_PIN - #define SERVO0_PIN PA8 // Enable BLTOUCH support on IO0 (WIFI connector) -#endif - #define MT_DET_1_PIN PA4 #define MT_DET_PIN_INVERTING false diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index bfa4007658..d594e3ca49 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -35,6 +35,9 @@ #define I2C_EEPROM #define MARLIN_EEPROM_SIZE 0x2000 // 8KB (24C64 ... 64Kb = 8KB) +// USB Flash Drive support +#define HAS_OTG_USB_HOST_SUPPORT + #define TP // Enable to define servo and probe pins // diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index 235ed1edcc..be05ebcfa9 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -44,6 +44,9 @@ #define FLASH_EEPROM_LEVELING #endif +// USB Flash Drive support +#define HAS_OTG_USB_HOST_SUPPORT + // // Servos // diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h index f0fc99e0c0..81edff6793 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h @@ -41,6 +41,7 @@ //#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation //#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation #define I2C_EEPROM +#define MARLIN_EEPROM_SIZE 0x1000 // 4KB // // Release PB4 (Z_DIR_PIN) from JTAG NRST role diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h index 3336340469..719f8773f5 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h @@ -36,6 +36,10 @@ //#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation //#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation #define I2C_EEPROM +#define MARLIN_EEPROM_SIZE 0x1000 // 4KB + +// USB Flash Drive support +#define HAS_OTG_USB_HOST_SUPPORT // // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp index 539d316542..28a18cd9d8 100644 --- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp +++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp @@ -44,8 +44,9 @@ #include "../../core/serial.h" #include "../../module/temperature.h" -static_assert(USB_CS_PIN != -1, "USB_CS_PIN must be defined"); -static_assert(USB_INTR_PIN != -1, "USB_INTR_PIN must be defined"); +#if DISABLED(USE_OTG_USB_HOST) && !PINS_EXIST(USB_CS, USB_INTR) + #error "USB_FLASH_DRIVE_SUPPORT requires USB_CS_PIN and USB_INTR_PIN to be defined." +#endif #if ENABLED(USE_UHS3_USB) #define NO_AUTO_SPEED @@ -81,6 +82,17 @@ static_assert(USB_INTR_PIN != -1, "USB_INTR_PIN must be defined"); #define UHS_START (usb.Init() == 0) #define UHS_STATE(state) UHS_USB_HOST_STATE_##state +#elif ENABLED(USE_OTG_USB_HOST) + + #if HAS_SD_HOST_DRIVE + #include HAL_PATH(../../HAL, msc_sd.h) + #endif + + #include HAL_PATH(../../HAL, usb_host.h) + + #define UHS_START usb.start() + #define rREVISION 0 + #define UHS_STATE(state) USB_STATE_##state #else #include "lib-uhs2/Usb.h" #include "lib-uhs2/masstorage.h" @@ -250,7 +262,7 @@ bool Sd2Card::isInserted() { return state == MEDIA_READY; } -bool Sd2Card::ready() { +bool Sd2Card::isReady() { return state > DO_STARTUP; } diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h index 8ca95ba706..83245168ab 100644 --- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h +++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h @@ -23,26 +23,27 @@ /** * \file - * \brief Sd2Card class for V2 SD/SDHC cards + * \brief Sd2Card class for USB Flash Drive */ - #include "../SdFatConfig.h" #include "../SdInfo.h" -/** - * Define SOFTWARE_SPI to use bit-bang SPI - */ -#if EITHER(MEGA_SOFT_SPI, USE_SOFTWARE_SPI) - #define SOFTWARE_SPI -#endif +#if DISABLED(USE_OTG_USB_HOST) + /** + * Define SOFTWARE_SPI to use bit-bang SPI + */ + #if EITHER(MEGA_SOFT_SPI, USE_SOFTWARE_SPI) + #define SOFTWARE_SPI + #endif -// SPI pin definitions - do not edit here - change in SdFatConfig.h -#if ENABLED(SOFTWARE_SPI) - #warning "Auto-assigning '10' as the SD_CHIP_SELECT_PIN." - #define SD_CHIP_SELECT_PIN 10 // Software SPI chip select pin for the SD -#else - // hardware pin defs - #define SD_CHIP_SELECT_PIN SS_PIN // The default chip select pin for the SD card is SS. + // SPI pin definitions - do not edit here - change in SdFatConfig.h + #if ENABLED(SOFTWARE_SPI) + #warning "Auto-assigning '10' as the SD_CHIP_SELECT_PIN." + #define SD_CHIP_SELECT_PIN 10 // Software SPI chip select pin for the SD + #else + // hardware pin defs + #define SD_CHIP_SELECT_PIN SS_PIN // The default chip select pin for the SD card is SS. + #endif #endif class Sd2Card { @@ -54,22 +55,24 @@ class Sd2Card { public: static bool usbStartup(); - bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=SD_CHIP_SELECT_PIN); + bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=TERN(USE_OTG_USB_HOST, 0, SD_CHIP_SELECT_PIN)); static void idle(); - inline bool readStart(const uint32_t block) { pos = block; return ready(); } + inline bool readStart(const uint32_t block) { pos = block; return isReady(); } inline bool readData(uint8_t* dst) { return readBlock(pos++, dst); } inline bool readStop() const { return true; } - inline bool writeStart(const uint32_t block, const uint32_t) { pos = block; return ready(); } + inline bool writeStart(const uint32_t block, const uint32_t) { pos = block; return isReady(); } inline bool writeData(uint8_t* src) { return writeBlock(pos++, src); } inline bool writeStop() const { return true; } bool readBlock(uint32_t block, uint8_t* dst); bool writeBlock(uint32_t blockNumber, const uint8_t* src); + bool readCSD(csd_t* csd) { return true; }; + uint32_t cardSize(); static bool isInserted(); - static bool ready(); + bool isReady(); }; diff --git a/platformio.ini b/platformio.ini index 2aff7aad23..3e87968eef 100644 --- a/platformio.ini +++ b/platformio.ini @@ -59,7 +59,7 @@ default_src_filter = + - - + - - - - - - + - - - - - @@ -272,7 +272,8 @@ HAS_DGUS_LCD = src_filter=+ + EXTUI_EXAMPLE = src_filter=+ MALYAN_LCD = src_filter=+ -USB_FLASH_DRIVE_SUPPORT = src_filter=+ +USE_UHS2_USB = src_filter=+ +USE_UHS3_USB = src_filter=+ AUTO_BED_LEVELING_BILINEAR = src_filter=+ AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+ MESH_BED_LEVELING = src_filter=+ + @@ -1278,6 +1279,23 @@ extra_scripts = ${common.extra_scripts} debug_tool = stlink debug_init_break = +# +# USB Flash Drive mix-ins for STM32 +# +[stm32_flash_drive] +platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc.zip +build_flags = ${common_stm32.build_flags} + -DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED + -DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4 + +# +# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) with USB Flash Drive Support +# +[env:BIGTREE_SKR_PRO_usb_flash_drive] +extends = env:BIGTREE_SKR_PRO +platform_packages = ${stm32_flash_drive.platform_packages} +build_flags = ${stm32_flash_drive.build_flags} + # # Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) # @@ -1290,6 +1308,14 @@ extra_scripts = ${common.extra_scripts} build_flags = ${common_stm32.build_flags} -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000 +# +# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) with USB Flash Drive Support +# +[env:BIGTREE_GTR_V1_0_usb_flash_drive] +extends = env:BIGTREE_GTR_V1_0 +platform_packages = ${stm32_flash_drive.platform_packages} +build_flags = ${stm32_flash_drive.build_flags} + # # BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4) # @@ -1392,13 +1418,16 @@ extra_scripts = ${common.extra_scripts} # [env:mks_robin_pro2] platform = ${common_stm32.platform} +platform_packages = ${stm32_flash_drive.platform_packages} extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DHAL_HCD_MODULE_ENABLED -DUSBHOST +build_flags = ${stm32_flash_drive.build_flags} board = genericSTM32F407VET6 board_build.core = stm32 board_build.variant = MARLIN_F4x7Vx board_build.ldscript = ldscript.ld board_build.firmware = firmware.bin +board_build.offset = 0x0000 +board_upload.offset_address = 0x08000000 build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC debug_tool = jlink upload_protocol = jlink @@ -1427,6 +1456,21 @@ extra_scripts = ${common.extra_scripts} pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py buildroot/share/PlatformIO/scripts/stm32_bootloader.py +# +# MKS Robin Nano V3 with USB Flash Drive Support +# Currently, using a STM32duino fork, until USB Host get merged +# +[env:mks_robin_nano_v3_usb_flash_drive] +extends = env:mks_robin_nano_v3 +platform_packages = ${stm32_flash_drive.platform_packages} +build_flags = ${stm32_flash_drive.build_flags} + -DUSBCON + -DUSE_USBHOST_HS + -DUSBD_IRQ_PRIO=5 + -DUSBD_IRQ_SUBPRIO=6 + -DUSE_USB_HS_IN_FS + -DUSBD_USE_CDC + ################################# # # # Other Architectures #