Latest upstream commits, plus fixes
- Also add Manual Bed Leveling to the rest of the configs
This commit is contained in:
Scott Lahteine
commit
88e81a4804
|
|
@ -374,6 +374,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
|||
//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -20,6 +20,12 @@
|
|||
* max_e_jerk
|
||||
* add_homing (x3)
|
||||
*
|
||||
* Mesh bed leveling:
|
||||
* active
|
||||
* mesh_num_x
|
||||
* mesh_num_y
|
||||
* z_values[][]
|
||||
*
|
||||
* DELTA:
|
||||
* endstop_adj (x3)
|
||||
* delta_radius
|
||||
|
|
@ -69,6 +75,10 @@
|
|||
#include "ultralcd.h"
|
||||
#include "ConfigurationStore.h"
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#include "mesh_bed_leveling.h"
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size) {
|
||||
uint8_t c;
|
||||
while(size--) {
|
||||
|
|
@ -105,7 +115,7 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) {
|
|||
// wrong data being written to the variables.
|
||||
// ALSO: always make sure the variables in the Store and retrieve sections are in the same order.
|
||||
|
||||
#define EEPROM_VERSION "V16"
|
||||
#define EEPROM_VERSION "V17"
|
||||
|
||||
#ifdef EEPROM_SETTINGS
|
||||
|
||||
|
|
@ -128,6 +138,28 @@ void Config_StoreSettings() {
|
|||
EEPROM_WRITE_VAR(i, max_e_jerk);
|
||||
EEPROM_WRITE_VAR(i, add_homing);
|
||||
|
||||
uint8_t mesh_num_x = 3;
|
||||
uint8_t mesh_num_y = 3;
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
// Compile time test that sizeof(mbl.z_values) is as expected
|
||||
typedef char c_assert[(sizeof(mbl.z_values) == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS*sizeof(dummy)) ? 1 : -1];
|
||||
mesh_num_x = MESH_NUM_X_POINTS;
|
||||
mesh_num_y = MESH_NUM_Y_POINTS;
|
||||
EEPROM_WRITE_VAR(i, mbl.active);
|
||||
EEPROM_WRITE_VAR(i, mesh_num_x);
|
||||
EEPROM_WRITE_VAR(i, mesh_num_y);
|
||||
EEPROM_WRITE_VAR(i, mbl.z_values);
|
||||
#else
|
||||
uint8_t dummy_uint8 = 0;
|
||||
EEPROM_WRITE_VAR(i, dummy_uint8);
|
||||
EEPROM_WRITE_VAR(i, mesh_num_x);
|
||||
EEPROM_WRITE_VAR(i, mesh_num_y);
|
||||
dummy = 0.0f;
|
||||
for (int q=0; q<mesh_num_x*mesh_num_y; q++) {
|
||||
EEPROM_WRITE_VAR(i, dummy);
|
||||
}
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
#ifdef DELTA
|
||||
EEPROM_WRITE_VAR(i, endstop_adj); // 3 floats
|
||||
EEPROM_WRITE_VAR(i, delta_radius); // 1 float
|
||||
|
|
@ -250,7 +282,7 @@ void Config_RetrieveSettings() {
|
|||
EEPROM_READ_VAR(i, max_feedrate);
|
||||
EEPROM_READ_VAR(i, max_acceleration_units_per_sq_second);
|
||||
|
||||
// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
|
||||
// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
|
||||
reset_acceleration_rates();
|
||||
|
||||
EEPROM_READ_VAR(i, acceleration);
|
||||
|
|
@ -264,6 +296,31 @@ void Config_RetrieveSettings() {
|
|||
EEPROM_READ_VAR(i, max_e_jerk);
|
||||
EEPROM_READ_VAR(i, add_homing);
|
||||
|
||||
uint8_t mesh_num_x = 0;
|
||||
uint8_t mesh_num_y = 0;
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
EEPROM_READ_VAR(i, mbl.active);
|
||||
EEPROM_READ_VAR(i, mesh_num_x);
|
||||
EEPROM_READ_VAR(i, mesh_num_y);
|
||||
if (mesh_num_x != MESH_NUM_X_POINTS ||
|
||||
mesh_num_y != MESH_NUM_Y_POINTS) {
|
||||
mbl.reset();
|
||||
for (int q=0; q<mesh_num_x*mesh_num_y; q++) {
|
||||
EEPROM_READ_VAR(i, dummy);
|
||||
}
|
||||
} else {
|
||||
EEPROM_READ_VAR(i, mbl.z_values);
|
||||
}
|
||||
#else
|
||||
uint8_t dummy_uint8 = 0;
|
||||
EEPROM_READ_VAR(i, dummy_uint8);
|
||||
EEPROM_READ_VAR(i, mesh_num_x);
|
||||
EEPROM_READ_VAR(i, mesh_num_y);
|
||||
for (int q=0; q<mesh_num_x*mesh_num_y; q++) {
|
||||
EEPROM_READ_VAR(i, dummy);
|
||||
}
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
#ifdef DELTA
|
||||
EEPROM_READ_VAR(i, endstop_adj); // 3 floats
|
||||
EEPROM_READ_VAR(i, delta_radius); // 1 float
|
||||
|
|
@ -392,6 +449,10 @@ void Config_ResetDefault() {
|
|||
max_e_jerk = DEFAULT_EJERK;
|
||||
add_homing[X_AXIS] = add_homing[Y_AXIS] = add_homing[Z_AXIS] = 0;
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
mbl.active = 0;
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
#ifdef DELTA
|
||||
endstop_adj[X_AXIS] = endstop_adj[Y_AXIS] = endstop_adj[Z_AXIS] = 0;
|
||||
delta_radius = DELTA_RADIUS;
|
||||
|
|
|
|||
|
|
@ -41,6 +41,10 @@
|
|||
|
||||
#define SERVO_LEVELING defined(ENABLE_AUTO_BED_LEVELING) && PROBE_SERVO_DEACTIVATION_DELAY > 0
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#include "mesh_bed_leveling.h"
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
#include "ultralcd.h"
|
||||
#include "planner.h"
|
||||
#include "stepper.h"
|
||||
|
|
@ -1737,6 +1741,11 @@ inline void gcode_G28() {
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
uint8_t mbl_was_active = mbl.active;
|
||||
mbl.active = 0;
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
saved_feedrate = feedrate;
|
||||
saved_feedmultiply = feedmultiply;
|
||||
feedmultiply = 100;
|
||||
|
|
@ -1951,12 +1960,112 @@ inline void gcode_G28() {
|
|||
enable_endstops(false);
|
||||
#endif
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
if (mbl_was_active) {
|
||||
current_position[X_AXIS] = mbl.get_x(0);
|
||||
current_position[Y_AXIS] = mbl.get_y(0);
|
||||
destination[X_AXIS] = current_position[X_AXIS];
|
||||
destination[Y_AXIS] = current_position[Y_AXIS];
|
||||
destination[Z_AXIS] = current_position[Z_AXIS];
|
||||
destination[E_AXIS] = current_position[E_AXIS];
|
||||
feedrate = homing_feedrate[X_AXIS];
|
||||
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate, active_extruder);
|
||||
st_synchronize();
|
||||
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
|
||||
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
||||
mbl.active = 1;
|
||||
}
|
||||
#endif
|
||||
|
||||
feedrate = saved_feedrate;
|
||||
feedmultiply = saved_feedmultiply;
|
||||
previous_millis_cmd = millis();
|
||||
endstops_hit_on_purpose();
|
||||
}
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
|
||||
inline void gcode_G29() {
|
||||
static int probe_point = -1;
|
||||
int state = 0;
|
||||
if (code_seen('S') || code_seen('s')) {
|
||||
state = code_value_long();
|
||||
if (state < 0 || state > 2) {
|
||||
SERIAL_PROTOCOLPGM("S out of range (0-2).\n");
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
if (state == 0) { // Dump mesh_bed_leveling
|
||||
if (mbl.active) {
|
||||
SERIAL_PROTOCOLPGM("Num X,Y: ");
|
||||
SERIAL_PROTOCOL(MESH_NUM_X_POINTS);
|
||||
SERIAL_PROTOCOLPGM(",");
|
||||
SERIAL_PROTOCOL(MESH_NUM_Y_POINTS);
|
||||
SERIAL_PROTOCOLPGM("\nZ search height: ");
|
||||
SERIAL_PROTOCOL(MESH_HOME_SEARCH_Z);
|
||||
SERIAL_PROTOCOLPGM("\nMeasured points:\n");
|
||||
for (int y=0; y<MESH_NUM_Y_POINTS; y++) {
|
||||
for (int x=0; x<MESH_NUM_X_POINTS; x++) {
|
||||
SERIAL_PROTOCOLPGM(" ");
|
||||
SERIAL_PROTOCOL_F(mbl.z_values[y][x], 5);
|
||||
}
|
||||
SERIAL_EOL;
|
||||
}
|
||||
} else {
|
||||
SERIAL_PROTOCOLPGM("Mesh bed leveling not active.\n");
|
||||
}
|
||||
|
||||
} else if (state == 1) { // Begin probing mesh points
|
||||
|
||||
mbl.reset();
|
||||
probe_point = 0;
|
||||
enquecommands_P(PSTR("G28"));
|
||||
enquecommands_P(PSTR("G29 S2"));
|
||||
|
||||
} else if (state == 2) { // Goto next point
|
||||
|
||||
if (probe_point < 0) {
|
||||
SERIAL_PROTOCOLPGM("Mesh probing not started.\n");
|
||||
return;
|
||||
}
|
||||
int ix, iy;
|
||||
if (probe_point == 0) {
|
||||
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
|
||||
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
||||
} else {
|
||||
ix = (probe_point-1) % MESH_NUM_X_POINTS;
|
||||
iy = (probe_point-1) / MESH_NUM_X_POINTS;
|
||||
if (iy&1) { // Zig zag
|
||||
ix = (MESH_NUM_X_POINTS - 1) - ix;
|
||||
}
|
||||
mbl.set_z(ix, iy, current_position[Z_AXIS]);
|
||||
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder);
|
||||
st_synchronize();
|
||||
}
|
||||
if (probe_point == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS) {
|
||||
SERIAL_PROTOCOLPGM("Mesh done.\n");
|
||||
probe_point = -1;
|
||||
mbl.active = 1;
|
||||
enquecommands_P(PSTR("G28"));
|
||||
return;
|
||||
}
|
||||
ix = probe_point % MESH_NUM_X_POINTS;
|
||||
iy = probe_point / MESH_NUM_X_POINTS;
|
||||
if (iy&1) { // Zig zag
|
||||
ix = (MESH_NUM_X_POINTS - 1) - ix;
|
||||
}
|
||||
current_position[X_AXIS] = mbl.get_x(ix);
|
||||
current_position[Y_AXIS] = mbl.get_y(iy);
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder);
|
||||
st_synchronize();
|
||||
probe_point++;
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
|
||||
// Define the possible boundaries for probing based on set limits
|
||||
|
|
@ -2118,9 +2227,10 @@ inline void gcode_G28() {
|
|||
|
||||
st_synchronize();
|
||||
|
||||
#ifdef DELTA
|
||||
reset_bed_level();
|
||||
#else
|
||||
#ifdef DELTA
|
||||
reset_bed_level();
|
||||
#else
|
||||
|
||||
// make sure the bed_level_rotation_matrix is identity or the planner will get it incorectly
|
||||
//vector_3 corrected_position = plan_get_position_mm();
|
||||
//corrected_position.debug("position before G29");
|
||||
|
|
@ -4661,6 +4771,12 @@ void process_commands() {
|
|||
gcode_G28();
|
||||
break;
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
case 29: // G29 Handle mesh based leveling
|
||||
gcode_G29();
|
||||
break;
|
||||
#endif
|
||||
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
|
||||
case 29: // G29 Detailed Z-Probe, probes the bed at 3 or more points.
|
||||
|
|
@ -5280,6 +5396,81 @@ void prepare_move_raw()
|
|||
}
|
||||
#endif //DELTA
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#if !defined(MIN)
|
||||
#define MIN(_v1, _v2) (((_v1) < (_v2)) ? (_v1) : (_v2))
|
||||
#endif // ! MIN
|
||||
// This function is used to split lines on mesh borders so each segment is only part of one mesh area
|
||||
void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_rate, const uint8_t &extruder, uint8_t x_splits=0xff, uint8_t y_splits=0xff)
|
||||
{
|
||||
if (!mbl.active) {
|
||||
plan_buffer_line(x, y, z, e, feed_rate, extruder);
|
||||
for(int8_t i=0; i < NUM_AXIS; i++) {
|
||||
current_position[i] = destination[i];
|
||||
}
|
||||
return;
|
||||
}
|
||||
int pix = mbl.select_x_index(current_position[X_AXIS]);
|
||||
int piy = mbl.select_y_index(current_position[Y_AXIS]);
|
||||
int ix = mbl.select_x_index(x);
|
||||
int iy = mbl.select_y_index(y);
|
||||
pix = MIN(pix, MESH_NUM_X_POINTS-2);
|
||||
piy = MIN(piy, MESH_NUM_Y_POINTS-2);
|
||||
ix = MIN(ix, MESH_NUM_X_POINTS-2);
|
||||
iy = MIN(iy, MESH_NUM_Y_POINTS-2);
|
||||
if (pix == ix && piy == iy) {
|
||||
// Start and end on same mesh square
|
||||
plan_buffer_line(x, y, z, e, feed_rate, extruder);
|
||||
for(int8_t i=0; i < NUM_AXIS; i++) {
|
||||
current_position[i] = destination[i];
|
||||
}
|
||||
return;
|
||||
}
|
||||
float nx, ny, ne, normalized_dist;
|
||||
if (ix > pix && (x_splits) & BIT(ix)) {
|
||||
nx = mbl.get_x(ix);
|
||||
normalized_dist = (nx - current_position[X_AXIS])/(x - current_position[X_AXIS]);
|
||||
ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist;
|
||||
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
|
||||
x_splits ^= BIT(ix);
|
||||
} else if (ix < pix && (x_splits) & BIT(pix)) {
|
||||
nx = mbl.get_x(pix);
|
||||
normalized_dist = (nx - current_position[X_AXIS])/(x - current_position[X_AXIS]);
|
||||
ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist;
|
||||
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
|
||||
x_splits ^= BIT(pix);
|
||||
} else if (iy > piy && (y_splits) & BIT(iy)) {
|
||||
ny = mbl.get_y(iy);
|
||||
normalized_dist = (ny - current_position[Y_AXIS])/(y - current_position[Y_AXIS]);
|
||||
nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist;
|
||||
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
|
||||
y_splits ^= BIT(iy);
|
||||
} else if (iy < piy && (y_splits) & BIT(piy)) {
|
||||
ny = mbl.get_y(piy);
|
||||
normalized_dist = (ny - current_position[Y_AXIS])/(y - current_position[Y_AXIS]);
|
||||
nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist;
|
||||
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
|
||||
y_splits ^= BIT(piy);
|
||||
} else {
|
||||
// Already split on a border
|
||||
plan_buffer_line(x, y, z, e, feed_rate, extruder);
|
||||
for(int8_t i=0; i < NUM_AXIS; i++) {
|
||||
current_position[i] = destination[i];
|
||||
}
|
||||
return;
|
||||
}
|
||||
// Do the split and look for more borders
|
||||
destination[X_AXIS] = nx;
|
||||
destination[Y_AXIS] = ny;
|
||||
destination[E_AXIS] = ne;
|
||||
mesh_plan_buffer_line(nx, ny, z, ne, feed_rate, extruder, x_splits, y_splits);
|
||||
destination[X_AXIS] = x;
|
||||
destination[Y_AXIS] = y;
|
||||
destination[E_AXIS] = e;
|
||||
mesh_plan_buffer_line(x, y, z, e, feed_rate, extruder, x_splits, y_splits);
|
||||
}
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
void prepare_move()
|
||||
{
|
||||
clamp_to_software_endstops(destination);
|
||||
|
|
@ -5395,10 +5586,14 @@ for (int s = 1; s <= steps; s++) {
|
|||
#if ! (defined DELTA || defined SCARA)
|
||||
// Do not use feedmultiply for E or Z only moves
|
||||
if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) {
|
||||
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
|
||||
}
|
||||
else {
|
||||
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
|
||||
} else {
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder);
|
||||
return;
|
||||
#else
|
||||
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder);
|
||||
#endif // MESH_BED_LEVELING
|
||||
}
|
||||
#endif // !(DELTA || SCARA)
|
||||
|
||||
|
|
|
|||
|
|
@ -412,6 +412,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -358,6 +358,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -358,6 +358,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -384,6 +384,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -389,6 +389,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -413,6 +413,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -383,6 +383,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -413,6 +413,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -414,6 +414,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -381,6 +381,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -383,6 +383,23 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================ Manual Bed Leveling ==========================
|
||||
//===========================================================================
|
||||
|
||||
// #define MANUAL_BED_LEVELING // Add display menu option for bed leveling
|
||||
// #define MESH_BED_LEVELING // Enable mesh bed leveling
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#define MESH_MIN_X 10
|
||||
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
|
||||
#define MESH_MIN_Y 10
|
||||
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
//===========================================================================
|
||||
|
|
|
|||
|
|
@ -95,6 +95,9 @@
|
|||
#ifndef MSG_MOVE_AXIS
|
||||
#define MSG_MOVE_AXIS "Move axis"
|
||||
#endif
|
||||
#ifndef MSG_LEVEL_BED
|
||||
#define MSG_LEVEL_BED "Level bed"
|
||||
#endif
|
||||
#ifndef MSG_MOVE_X
|
||||
#define MSG_MOVE_X "Move X"
|
||||
#endif
|
||||
|
|
|
|||
20
Marlin/mesh_bed_leveling.cpp
Normal file
20
Marlin/mesh_bed_leveling.cpp
Normal file
|
|
@ -0,0 +1,20 @@
|
|||
#include "mesh_bed_leveling.h"
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
|
||||
mesh_bed_leveling mbl;
|
||||
|
||||
mesh_bed_leveling::mesh_bed_leveling() {
|
||||
reset();
|
||||
}
|
||||
|
||||
void mesh_bed_leveling::reset() {
|
||||
for (int y=0; y<MESH_NUM_Y_POINTS; y++) {
|
||||
for (int x=0; x<MESH_NUM_X_POINTS; x++) {
|
||||
z_values[y][x] = 0;
|
||||
}
|
||||
}
|
||||
active = 0;
|
||||
}
|
||||
|
||||
#endif // MESH_BED_LEVELING
|
||||
61
Marlin/mesh_bed_leveling.h
Normal file
61
Marlin/mesh_bed_leveling.h
Normal file
|
|
@ -0,0 +1,61 @@
|
|||
#include "Marlin.h"
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
|
||||
#define MESH_X_DIST ((MESH_MAX_X - MESH_MIN_X)/(MESH_NUM_X_POINTS - 1))
|
||||
#define MESH_Y_DIST ((MESH_MAX_Y - MESH_MIN_Y)/(MESH_NUM_Y_POINTS - 1))
|
||||
|
||||
class mesh_bed_leveling {
|
||||
public:
|
||||
uint8_t active;
|
||||
float z_values[MESH_NUM_Y_POINTS][MESH_NUM_X_POINTS];
|
||||
|
||||
mesh_bed_leveling();
|
||||
|
||||
void reset();
|
||||
|
||||
float get_x(int i) { return MESH_MIN_X + MESH_X_DIST*i; }
|
||||
float get_y(int i) { return MESH_MIN_Y + MESH_Y_DIST*i; }
|
||||
void set_z(int ix, int iy, float z) { z_values[iy][ix] = z; }
|
||||
|
||||
int select_x_index(float x) {
|
||||
int i = 1;
|
||||
while (x > get_x(i) && i < MESH_NUM_X_POINTS-1) {
|
||||
i++;
|
||||
}
|
||||
return i-1;
|
||||
}
|
||||
|
||||
int select_y_index(float y) {
|
||||
int i = 1;
|
||||
while (y > get_y(i) && i < MESH_NUM_Y_POINTS-1) {
|
||||
i++;
|
||||
}
|
||||
return i-1;
|
||||
}
|
||||
|
||||
float calc_z0(float a0, float a1, float z1, float a2, float z2) {
|
||||
float delta_z = (z2 - z1)/(a2 - a1);
|
||||
float delta_a = a0 - a1;
|
||||
return z1 + delta_a * delta_z;
|
||||
}
|
||||
|
||||
float get_z(float x0, float y0) {
|
||||
int x_index = select_x_index(x0);
|
||||
int y_index = select_y_index(y0);
|
||||
float z1 = calc_z0(x0,
|
||||
get_x(x_index), z_values[y_index][x_index],
|
||||
get_x(x_index+1), z_values[y_index][x_index+1]);
|
||||
float z2 = calc_z0(x0,
|
||||
get_x(x_index), z_values[y_index+1][x_index],
|
||||
get_x(x_index+1), z_values[y_index+1][x_index+1]);
|
||||
float z0 = calc_z0(y0,
|
||||
get_y(y_index), z1,
|
||||
get_y(y_index+1), z2);
|
||||
return z0;
|
||||
}
|
||||
};
|
||||
|
||||
extern mesh_bed_leveling mbl;
|
||||
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
|
@ -58,6 +58,10 @@
|
|||
#include "ultralcd.h"
|
||||
#include "language.h"
|
||||
|
||||
#if defined(MESH_BED_LEVELING)
|
||||
#include "mesh_bed_leveling.h"
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
//===========================================================================
|
||||
//============================= public variables ============================
|
||||
//===========================================================================
|
||||
|
|
@ -464,7 +468,7 @@ float junction_deviation = 0.1;
|
|||
// Add a new linear movement to the buffer. steps[X_AXIS], _y and _z is the absolute position in
|
||||
// mm. Microseconds specify how many microseconds the move should take to perform. To aid acceleration
|
||||
// calculation the caller must also provide the physical length of the line in millimeters.
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
#if defined(ENABLE_AUTO_BED_LEVELING) || defined(MESH_BED_LEVELING)
|
||||
void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, const uint8_t &extruder)
|
||||
#else
|
||||
void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder)
|
||||
|
|
@ -481,6 +485,10 @@ float junction_deviation = 0.1;
|
|||
lcd_update();
|
||||
}
|
||||
|
||||
#ifdef MESH_BED_LEVELING
|
||||
if (mbl.active) z += mbl.get_z(x, y);
|
||||
#endif
|
||||
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
apply_rotation_xyz(plan_bed_level_matrix, x, y, z);
|
||||
#endif
|
||||
|
|
@ -948,30 +956,31 @@ float junction_deviation = 0.1;
|
|||
|
||||
} // plan_buffer_line()
|
||||
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
#if defined(ENABLE_AUTO_BED_LEVELING) && !defined(DELTA)
|
||||
vector_3 plan_get_position() {
|
||||
vector_3 position = vector_3(st_get_position_mm(X_AXIS), st_get_position_mm(Y_AXIS), st_get_position_mm(Z_AXIS));
|
||||
|
||||
#ifndef DELTA
|
||||
vector_3 plan_get_position() {
|
||||
vector_3 position = vector_3(st_get_position_mm(X_AXIS), st_get_position_mm(Y_AXIS), st_get_position_mm(Z_AXIS));
|
||||
//position.debug("in plan_get position");
|
||||
//plan_bed_level_matrix.debug("in plan_get bed_level");
|
||||
matrix_3x3 inverse = matrix_3x3::transpose(plan_bed_level_matrix);
|
||||
//inverse.debug("in plan_get inverse");
|
||||
position.apply_rotation(inverse);
|
||||
//position.debug("after rotation");
|
||||
|
||||
//position.debug("in plan_get position");
|
||||
//plan_bed_level_matrix.debug("in plan_get bed_level");
|
||||
matrix_3x3 inverse = matrix_3x3::transpose(plan_bed_level_matrix);
|
||||
//inverse.debug("in plan_get inverse");
|
||||
position.apply_rotation(inverse);
|
||||
//position.debug("after rotation");
|
||||
|
||||
return position;
|
||||
}
|
||||
#endif //!DELTA
|
||||
return position;
|
||||
}
|
||||
#endif // ENABLE_AUTO_BED_LEVELING && !DELTA
|
||||
|
||||
#if defined(ENABLE_AUTO_BED_LEVELING) || defined(MESH_BED_LEVELING)
|
||||
void plan_set_position(float x, float y, float z, const float &e)
|
||||
#else
|
||||
void plan_set_position(const float &x, const float &y, const float &z, const float &e)
|
||||
#endif // ENABLE_AUTO_BED_LEVELING
|
||||
#endif // ENABLE_AUTO_BED_LEVELING || MESH_BED_LEVELING
|
||||
{
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
apply_rotation_xyz(plan_bed_level_matrix, x, y, z);
|
||||
#elif defined(MESH_BED_LEVELING)
|
||||
if (mbl.active) z += mbl.get_z(x, y);
|
||||
#endif
|
||||
|
||||
float nx = position[X_AXIS] = lround(x * axis_steps_per_unit[X_AXIS]);
|
||||
|
|
|
|||
|
|
@ -79,23 +79,23 @@ extern volatile unsigned char block_buffer_head;
|
|||
extern volatile unsigned char block_buffer_tail;
|
||||
FORCE_INLINE uint8_t movesplanned() { return BLOCK_MOD(block_buffer_head - block_buffer_tail + BLOCK_BUFFER_SIZE); }
|
||||
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
#include "vector_3.h"
|
||||
// this holds the required transform to compensate for bed level
|
||||
extern matrix_3x3 plan_bed_level_matrix;
|
||||
#if defined(ENABLE_AUTO_BED_LEVELING) || defined(MESH_BED_LEVELING)
|
||||
#if defined(ENABLE_AUTO_BED_LEVELING)
|
||||
#include "vector_3.h"
|
||||
// this holds the required transform to compensate for bed level
|
||||
extern matrix_3x3 plan_bed_level_matrix;
|
||||
// Get the position applying the bed level matrix if enabled
|
||||
vector_3 plan_get_position();
|
||||
#endif // ENABLE_AUTO_BED_LEVELING
|
||||
// Add a new linear movement to the buffer. x, y and z is the signed, absolute target position in
|
||||
// millimaters. Feed rate specifies the speed of the motion.
|
||||
// millimeters. Feed rate specifies the speed of the motion.
|
||||
void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, const uint8_t &extruder);
|
||||
// Set position. Used for G92 instructions.
|
||||
void plan_set_position(float x, float y, float z, const float &e);
|
||||
#ifndef DELTA
|
||||
// Get the position applying the bed level matrix if enabled
|
||||
vector_3 plan_get_position();
|
||||
#endif
|
||||
#else //!ENABLE_AUTO_BED_LEVELING
|
||||
#else
|
||||
void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder);
|
||||
void plan_set_position(const float &x, const float &y, const float &z, const float &e);
|
||||
#endif //!ENABLE_AUTO_BED_LEVELING
|
||||
#endif // ENABLE_AUTO_BED_LEVELING || MESH_BED_LEVELING
|
||||
|
||||
void plan_set_e_position(const float &e);
|
||||
|
||||
|
|
|
|||
|
|
@ -145,7 +145,7 @@ static volatile bool temp_meas_ready = false;
|
|||
static float temp_iState_min_bed;
|
||||
static float temp_iState_max_bed;
|
||||
#else //PIDTEMPBED
|
||||
static unsigned long previous_millis_bed_heater;
|
||||
static unsigned long previous_millis_bed_heater;
|
||||
#endif //PIDTEMPBED
|
||||
static unsigned char soft_pwm[EXTRUDERS];
|
||||
|
||||
|
|
@ -243,7 +243,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
|||
SERIAL_ECHOLN(MSG_PID_BAD_EXTRUDER_NUM);
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
SERIAL_ECHOLN(MSG_PID_AUTOTUNE_START);
|
||||
|
||||
disable_heater(); // switch off all heaters.
|
||||
|
|
@ -755,8 +755,8 @@ void manage_heater() {
|
|||
#ifdef FILAMENT_SENSOR
|
||||
if (filament_sensor) {
|
||||
meas_shift_index = delay_index1 - meas_delay_cm;
|
||||
if (meas_shift_index < 0) meas_shift_index += MAX_MEASUREMENT_DELAY + 1; //loop around buffer if needed
|
||||
|
||||
if (meas_shift_index < 0) meas_shift_index += MAX_MEASUREMENT_DELAY + 1; //loop around buffer if needed
|
||||
|
||||
// Get the delayed info and add 100 to reconstitute to a percent of
|
||||
// the nominal filament diameter then square it to get an area
|
||||
meas_shift_index = constrain(meas_shift_index, 0, MAX_MEASUREMENT_DELAY);
|
||||
|
|
@ -1259,10 +1259,7 @@ enum TempState {
|
|||
ISR(TIMER0_COMPB_vect) {
|
||||
//these variables are only accesible from the ISR, but static, so they don't lose their value
|
||||
static unsigned char temp_count = 0;
|
||||
static unsigned long raw_temp_0_value = 0;
|
||||
static unsigned long raw_temp_1_value = 0;
|
||||
static unsigned long raw_temp_2_value = 0;
|
||||
static unsigned long raw_temp_3_value = 0;
|
||||
static unsigned long raw_temp_value[EXTRUDERS] = { 0 };
|
||||
static unsigned long raw_temp_bed_value = 0;
|
||||
static TempState temp_state = StartupDelay;
|
||||
static unsigned char pwm_count = BIT(SOFT_PWM_SCALE);
|
||||
|
|
@ -1474,7 +1471,7 @@ ISR(TIMER0_COMPB_vect) {
|
|||
break;
|
||||
case MeasureTemp_0:
|
||||
#if HAS_TEMP_0
|
||||
raw_temp_0_value += ADC;
|
||||
raw_temp_value[0] += ADC;
|
||||
#endif
|
||||
temp_state = PrepareTemp_BED;
|
||||
break;
|
||||
|
|
@ -1500,7 +1497,7 @@ ISR(TIMER0_COMPB_vect) {
|
|||
break;
|
||||
case MeasureTemp_1:
|
||||
#if HAS_TEMP_1
|
||||
raw_temp_1_value += ADC;
|
||||
raw_temp_value[1] += ADC;
|
||||
#endif
|
||||
temp_state = PrepareTemp_2;
|
||||
break;
|
||||
|
|
@ -1513,7 +1510,7 @@ ISR(TIMER0_COMPB_vect) {
|
|||
break;
|
||||
case MeasureTemp_2:
|
||||
#if HAS_TEMP_2
|
||||
raw_temp_2_value += ADC;
|
||||
raw_temp_value[2] += ADC;
|
||||
#endif
|
||||
temp_state = PrepareTemp_3;
|
||||
break;
|
||||
|
|
@ -1526,7 +1523,7 @@ ISR(TIMER0_COMPB_vect) {
|
|||
break;
|
||||
case MeasureTemp_3:
|
||||
#if HAS_TEMP_3
|
||||
raw_temp_3_value += ADC;
|
||||
raw_temp_value[3] += ADC;
|
||||
#endif
|
||||
temp_state = Prepare_FILWIDTH;
|
||||
break;
|
||||
|
|
@ -1561,19 +1558,19 @@ ISR(TIMER0_COMPB_vect) {
|
|||
if (temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms.
|
||||
if (!temp_meas_ready) { //Only update the raw values if they have been read. Else we could be updating them during reading.
|
||||
#ifndef HEATER_0_USES_MAX6675
|
||||
current_temperature_raw[0] = raw_temp_0_value;
|
||||
current_temperature_raw[0] = raw_temp_value[0];
|
||||
#endif
|
||||
#if EXTRUDERS > 1
|
||||
current_temperature_raw[1] = raw_temp_1_value;
|
||||
current_temperature_raw[1] = raw_temp_value[1];
|
||||
#if EXTRUDERS > 2
|
||||
current_temperature_raw[2] = raw_temp_2_value;
|
||||
current_temperature_raw[2] = raw_temp_value[2];
|
||||
#if EXTRUDERS > 3
|
||||
current_temperature_raw[3] = raw_temp_3_value;
|
||||
current_temperature_raw[3] = raw_temp_value[3];
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
|
||||
redundant_temperature_raw = raw_temp_1_value;
|
||||
redundant_temperature_raw = raw_temp_value[1];
|
||||
#endif
|
||||
current_temperature_bed_raw = raw_temp_bed_value;
|
||||
} //!temp_meas_ready
|
||||
|
|
@ -1585,31 +1582,67 @@ ISR(TIMER0_COMPB_vect) {
|
|||
|
||||
temp_meas_ready = true;
|
||||
temp_count = 0;
|
||||
raw_temp_0_value = 0;
|
||||
raw_temp_1_value = 0;
|
||||
raw_temp_2_value = 0;
|
||||
raw_temp_3_value = 0;
|
||||
for (int i = 0; i < EXTRUDERS; i++) raw_temp_value[i] = 0;
|
||||
raw_temp_bed_value = 0;
|
||||
|
||||
#if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP
|
||||
#define MAXTEST <=
|
||||
#define MINTEST >=
|
||||
#define GE0 <=
|
||||
#define LE0 >=
|
||||
#else
|
||||
#define MAXTEST >=
|
||||
#define MINTEST <=
|
||||
#define GE0 >=
|
||||
#define LE0 <=
|
||||
#endif
|
||||
if (current_temperature_raw[0] GE0 maxttemp_raw[0]) max_temp_error(0);
|
||||
if (current_temperature_raw[0] LE0 minttemp_raw[0]) min_temp_error(0);
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
#if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP
|
||||
#define GE1 <=
|
||||
#define LE1 >=
|
||||
#else
|
||||
#define GE1 >=
|
||||
#define LE1 <=
|
||||
#endif
|
||||
if (current_temperature_raw[1] GE1 maxttemp_raw[1]) max_temp_error(1);
|
||||
if (current_temperature_raw[1] LE1 minttemp_raw[1]) min_temp_error(1);
|
||||
#if EXTRUDERS > 2
|
||||
#if HEATER_2_RAW_LO_TEMP > HEATER_2_RAW_HI_TEMP
|
||||
#define GE2 <=
|
||||
#define LE2 >=
|
||||
#else
|
||||
#define GE2 >=
|
||||
#define LE2 <=
|
||||
#endif
|
||||
if (current_temperature_raw[2] GE2 maxttemp_raw[2]) max_temp_error(2);
|
||||
if (current_temperature_raw[2] LE2 minttemp_raw[2]) min_temp_error(2);
|
||||
#if EXTRUDERS > 3
|
||||
#if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP
|
||||
#define GE3 <=
|
||||
#define LE3 >=
|
||||
#else
|
||||
#define GE3 >=
|
||||
#define LE3 <=
|
||||
#endif
|
||||
if (current_temperature_raw[3] GE3 maxttemp_raw[3]) max_temp_error(3);
|
||||
if (current_temperature_raw[3] LE3 minttemp_raw[3]) min_temp_error(3);
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
#endif // EXTRUDERS > 1
|
||||
|
||||
#if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0)
|
||||
#if HEATER_BED_RAW_LO_TEMP > HEATER_BED_RAW_HI_TEMP
|
||||
#define GEBED <=
|
||||
#define LEBED >=
|
||||
#else
|
||||
#define GEBED >=
|
||||
#define LEBED <=
|
||||
#endif
|
||||
if (current_temperature_bed_raw GEBED bed_maxttemp_raw) {
|
||||
target_temperature_bed = 0;
|
||||
bed_max_temp_error();
|
||||
}
|
||||
#endif
|
||||
|
||||
for (int i=0; i<EXTRUDERS; i++) {
|
||||
if (current_temperature_raw[i] MAXTEST maxttemp_raw[i]) max_temp_error(i);
|
||||
else if (current_temperature_raw[i] MINTEST minttemp_raw[i]) min_temp_error(i);
|
||||
}
|
||||
/* No bed MINTEMP error? */
|
||||
#if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0)
|
||||
if (current_temperature_bed_raw MAXTEST bed_maxttemp_raw) {
|
||||
target_temperature_bed = 0;
|
||||
bed_max_temp_error();
|
||||
}
|
||||
#endif
|
||||
} // temp_count >= OVERSAMPLENR
|
||||
|
||||
#ifdef BABYSTEPPING
|
||||
|
|
|
|||
|
|
@ -70,6 +70,13 @@ static void lcd_sdcard_menu();
|
|||
static void lcd_delta_calibrate_menu();
|
||||
#endif // DELTA_CALIBRATION_MENU
|
||||
|
||||
#if defined(MANUAL_BED_LEVELING)
|
||||
#include "mesh_bed_leveling.h"
|
||||
static void _lcd_level_bed();
|
||||
static void _lcd_level_bed_homing();
|
||||
static void lcd_level_bed();
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
|
||||
static void lcd_quick_feedback();//Cause an LCD refresh, and give the user visual or audible feedback that something has happened
|
||||
|
||||
/* Different types of actions that can be used in menu items. */
|
||||
|
|
@ -198,8 +205,8 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
|
|||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## args)
|
||||
#endif //!ENCODER_RATE_MULTIPLIER
|
||||
#define END_MENU() \
|
||||
if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \
|
||||
if ((uint8_t)(encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) >= currentMenuViewOffset + LCD_HEIGHT) { currentMenuViewOffset = (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) - LCD_HEIGHT + 1; lcdDrawUpdate = 1; _lineNr = currentMenuViewOffset - 1; _drawLineNr = -1; } \
|
||||
if (encoderLine >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; encoderLine = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM;\
|
||||
if (encoderLine >= currentMenuViewOffset + LCD_HEIGHT) { currentMenuViewOffset = encoderLine - LCD_HEIGHT + 1; lcdDrawUpdate = 1; _lineNr = currentMenuViewOffset - 1; _drawLineNr = -1; } \
|
||||
} } while(0)
|
||||
|
||||
/** Used variables to keep track of the menu */
|
||||
|
|
@ -630,6 +637,10 @@ static void lcd_prepare_menu() {
|
|||
}
|
||||
#endif
|
||||
MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
|
||||
|
||||
#if defined(MANUAL_BED_LEVELING)
|
||||
MENU_ITEM(submenu, MSG_LEVEL_BED, lcd_level_bed);
|
||||
#endif
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
|
@ -1341,7 +1352,12 @@ void lcd_update() {
|
|||
#endif
|
||||
|
||||
#ifdef ULTIPANEL
|
||||
if (currentMenu != lcd_status_screen && millis() > timeoutToStatus) {
|
||||
if (currentMenu != lcd_status_screen &&
|
||||
#if defined(MANUAL_BED_LEVELING)
|
||||
currentMenu != _lcd_level_bed &&
|
||||
currentMenu != _lcd_level_bed_homing &&
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
millis() > timeoutToStatus) {
|
||||
lcd_return_to_status();
|
||||
lcdDrawUpdate = 2;
|
||||
}
|
||||
|
|
@ -1760,4 +1776,75 @@ char *ftostr52(const float &x)
|
|||
return conv;
|
||||
}
|
||||
|
||||
#if defined(MANUAL_BED_LEVELING)
|
||||
static int _lcd_level_bed_position;
|
||||
static void _lcd_level_bed()
|
||||
{
|
||||
if (encoderPosition != 0) {
|
||||
refresh_cmd_timeout();
|
||||
current_position[Z_AXIS] += float((int)encoderPosition) * 0.05;
|
||||
if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS) current_position[Z_AXIS] = Z_MIN_POS;
|
||||
if (max_software_endstops && current_position[Z_AXIS] > Z_MAX_POS) current_position[Z_AXIS] = Z_MAX_POS;
|
||||
encoderPosition = 0;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[Z_AXIS]/60, active_extruder);
|
||||
lcdDrawUpdate = 1;
|
||||
}
|
||||
if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR("Z"), ftostr32(current_position[Z_AXIS]));
|
||||
static bool debounce_click = false;
|
||||
if (LCD_CLICKED) {
|
||||
if (!debounce_click) {
|
||||
debounce_click = true;
|
||||
int ix = _lcd_level_bed_position % MESH_NUM_X_POINTS;
|
||||
int iy = _lcd_level_bed_position / MESH_NUM_X_POINTS;
|
||||
mbl.set_z(ix, iy, current_position[Z_AXIS]);
|
||||
_lcd_level_bed_position++;
|
||||
if (_lcd_level_bed_position == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS) {
|
||||
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
|
||||
mbl.active = 1;
|
||||
enquecommands_P(PSTR("G28"));
|
||||
lcd_return_to_status();
|
||||
} else {
|
||||
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
|
||||
ix = _lcd_level_bed_position % MESH_NUM_X_POINTS;
|
||||
iy = _lcd_level_bed_position / MESH_NUM_X_POINTS;
|
||||
if (iy&1) { // Zig zag
|
||||
ix = (MESH_NUM_X_POINTS - 1) - ix;
|
||||
}
|
||||
current_position[X_AXIS] = mbl.get_x(ix);
|
||||
current_position[Y_AXIS] = mbl.get_y(iy);
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
|
||||
lcdDrawUpdate = 1;
|
||||
}
|
||||
}
|
||||
} else {
|
||||
debounce_click = false;
|
||||
}
|
||||
}
|
||||
static void _lcd_level_bed_homing()
|
||||
{
|
||||
if (axis_known_position[X_AXIS] &&
|
||||
axis_known_position[Y_AXIS] &&
|
||||
axis_known_position[Z_AXIS]) {
|
||||
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
|
||||
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
||||
current_position[X_AXIS] = MESH_MIN_X;
|
||||
current_position[Y_AXIS] = MESH_MIN_Y;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
|
||||
_lcd_level_bed_position = 0;
|
||||
lcd_goto_menu(_lcd_level_bed);
|
||||
}
|
||||
}
|
||||
static void lcd_level_bed()
|
||||
{
|
||||
axis_known_position[X_AXIS] = false;
|
||||
axis_known_position[Y_AXIS] = false;
|
||||
axis_known_position[Z_AXIS] = false;
|
||||
mbl.reset();
|
||||
enquecommands_P(PSTR("G28"));
|
||||
lcd_goto_menu(_lcd_level_bed_homing);
|
||||
}
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
|
||||
#endif //ULTRA_LCD
|
||||
|
|
|
|||
Loading…
Reference in a new issue