Fix and improve Power-Loss Recovery (#21779)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
tobuh
GitHub
parent
4a7f5603de
commit
8e56f9366d
|
|
@ -406,6 +406,15 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
|
|||
// Save current position
|
||||
resume_position = current_position;
|
||||
|
||||
// Will the nozzle be parking?
|
||||
const bool do_park = !axes_should_home();
|
||||
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
// Save PLR info in case the power goes out while parked
|
||||
const float park_raise = do_park ? nozzle.park_mode_0_height(park_point.z) - current_position.z : POWER_LOSS_ZRAISE;
|
||||
if (was_sd_printing && recovery.enabled) recovery.save(true, park_raise, do_park);
|
||||
#endif
|
||||
|
||||
// Wait for buffered blocks to complete
|
||||
planner.synchronize();
|
||||
|
||||
|
|
@ -419,9 +428,8 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
|
|||
unscaled_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE);
|
||||
}
|
||||
|
||||
// Park the nozzle by doing a Minimum Z Raise followed by an XY Move
|
||||
if (!axes_should_home())
|
||||
nozzle.park(0, park_point);
|
||||
// If axes don't need to home then the nozzle can park
|
||||
if (do_park) nozzle.park(0, park_point); // Park the nozzle by doing a Minimum Z Raise followed by an XY Move
|
||||
|
||||
#if ENABLED(DUAL_X_CARRIAGE)
|
||||
const int8_t saved_ext = active_extruder;
|
||||
|
|
@ -429,7 +437,8 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
|
|||
set_duplication_enabled(false, DXC_ext);
|
||||
#endif
|
||||
|
||||
if (unload_length) // Unload the filament
|
||||
// Unload the filament, if specified
|
||||
if (unload_length)
|
||||
unload_filament(unload_length, show_lcd, PAUSE_MODE_CHANGE_FILAMENT);
|
||||
|
||||
#if ENABLED(DUAL_X_CARRIAGE)
|
||||
|
|
|
|||
|
|
@ -144,7 +144,7 @@ void PrintJobRecovery::prepare() {
|
|||
/**
|
||||
* Save the current machine state to the power-loss recovery file
|
||||
*/
|
||||
void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=0*/) {
|
||||
void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=POWER_LOSS_ZRAISE*/, const bool raised/*=false*/) {
|
||||
|
||||
// We don't check IS_SD_PRINTING here so a save may occur during a pause
|
||||
|
||||
|
|
@ -181,14 +181,12 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=0*/
|
|||
info.current_position = current_position;
|
||||
info.feedrate = uint16_t(MMS_TO_MMM(feedrate_mm_s));
|
||||
info.zraise = zraise;
|
||||
info.flag.raised = raised; // Was Z raised before power-off?
|
||||
|
||||
TERN_(GCODE_REPEAT_MARKERS, info.stored_repeat = repeat);
|
||||
TERN_(HAS_HOME_OFFSET, info.home_offset = home_offset);
|
||||
TERN_(HAS_POSITION_SHIFT, info.position_shift = position_shift);
|
||||
|
||||
#if HAS_MULTI_EXTRUDER
|
||||
info.active_extruder = active_extruder;
|
||||
#endif
|
||||
TERN_(HAS_MULTI_EXTRUDER, info.active_extruder = active_extruder);
|
||||
|
||||
#if DISABLED(NO_VOLUMETRICS)
|
||||
info.flag.volumetric_enabled = parser.volumetric_enabled;
|
||||
|
|
@ -289,8 +287,9 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=0*/
|
|||
constexpr float zraise = 0;
|
||||
#endif
|
||||
|
||||
// Save, including the limited Z raise
|
||||
if (IS_SD_PRINTING()) save(true, zraise);
|
||||
// Save the current position, distance that Z was (or should be) raised,
|
||||
// and a flag whether the raise was already done here.
|
||||
if (IS_SD_PRINTING()) save(true, zraise, ENABLED(BACKUP_POWER_SUPPLY));
|
||||
|
||||
// Disable all heaters to reduce power loss
|
||||
thermalManager.disable_all_heaters();
|
||||
|
|
@ -350,10 +349,10 @@ void PrintJobRecovery::resume() {
|
|||
}
|
||||
#endif
|
||||
|
||||
// Restore all hotend temperatures
|
||||
// Heat hotend enough to soften material
|
||||
#if HAS_HOTEND
|
||||
HOTEND_LOOP() {
|
||||
const celsius_t et = info.target_temperature[e];
|
||||
const celsius_t et = _MAX(info.target_temperature[e], 180);
|
||||
if (et) {
|
||||
#if HAS_MULTI_HOTEND
|
||||
sprintf_P(cmd, PSTR("T%iS"), e);
|
||||
|
|
@ -365,37 +364,59 @@ void PrintJobRecovery::resume() {
|
|||
}
|
||||
#endif
|
||||
|
||||
// Interpret the saved Z according to flags
|
||||
const float z_print = info.current_position.z,
|
||||
z_raised = z_print + info.zraise;
|
||||
|
||||
//
|
||||
// Home the axes that can safely be homed, and
|
||||
// establish the current position as best we can.
|
||||
//
|
||||
|
||||
gcode.process_subcommands_now_P(PSTR("G92.9E0")); // Reset E to 0
|
||||
|
||||
#if Z_HOME_DIR > 0
|
||||
|
||||
// If Z homing goes to max...
|
||||
float z_now = z_raised;
|
||||
|
||||
// If Z homing goes to max then just move back to the "raised" position
|
||||
gcode.process_subcommands_now_P(PSTR(
|
||||
"G92.9 E0\n" // Reset E to 0
|
||||
"G28R0" // Home all axes (no raise)
|
||||
));
|
||||
"G28R0\n" // Home all axes (no raise)
|
||||
"G1Z%sF1200" // Move Z down to (raised) height
|
||||
),
|
||||
dtostrf(z_now, 1, 3, str_1)
|
||||
);
|
||||
|
||||
#else
|
||||
|
||||
// If a Z raise occurred at outage restore Z, otherwise raise Z now
|
||||
sprintf_P(cmd, PSTR("G92.9 E0 " TERN(BACKUP_POWER_SUPPLY, "Z%s", "Z0\nG1Z%s")), dtostrf(info.zraise, 1, 3, str_1));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
|
||||
// Home safely with no Z raise
|
||||
gcode.process_subcommands_now_P(PSTR(
|
||||
"G28R0" // No raise during G28
|
||||
#if IS_CARTESIAN && (DISABLED(POWER_LOSS_RECOVER_ZHOME) || defined(POWER_LOSS_ZHOME_POS))
|
||||
"XY" // Don't home Z on Cartesian unless overridden
|
||||
#endif
|
||||
));
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(POWER_LOSS_RECOVER_ZHOME) && defined(POWER_LOSS_ZHOME_POS)
|
||||
// Move to a safe XY position where Z can home while avoiding the print.
|
||||
// If Z_SAFE_HOMING is enabled, its position must also be outside the print area!
|
||||
#define HOMING_Z_DOWN 1
|
||||
#else
|
||||
#define HOME_XY_ONLY 1
|
||||
#endif
|
||||
|
||||
float z_now = info.flag.raised ? z_raised : z_print;
|
||||
|
||||
// Reset E to 0 and set Z to the real position
|
||||
#if HOME_XY_ONLY
|
||||
sprintf_P(cmd, PSTR("G92.9Z%s"), dtostrf(z_now, 1, 3, str_1));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
#endif
|
||||
|
||||
// Does Z need to be raised now? It should be raised before homing XY.
|
||||
if (z_raised > z_now) {
|
||||
z_now = z_raised;
|
||||
sprintf_P(cmd, PSTR("G1Z%sF600"), dtostrf(z_now, 1, 3, str_1));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
}
|
||||
|
||||
// Home XY with no Z raise, and also home Z here if Z isn't homing down below.
|
||||
gcode.process_subcommands_now_P(PSTR("G28R0" TERN_(HOME_XY_ONLY, "XY"))); // No raise during G28
|
||||
|
||||
#endif
|
||||
|
||||
#if HOMING_Z_DOWN
|
||||
// Move to a safe XY position and home Z while avoiding the print.
|
||||
constexpr xy_pos_t p = POWER_LOSS_ZHOME_POS;
|
||||
sprintf_P(cmd, PSTR("G1X%sY%sF1000\nG28Z"), dtostrf(p.x, 1, 3, str_1), dtostrf(p.y, 1, 3, str_2));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
|
|
@ -404,9 +425,24 @@ void PrintJobRecovery::resume() {
|
|||
// Mark all axes as having been homed (no effect on current_position)
|
||||
set_all_homed();
|
||||
|
||||
#if HAS_LEVELING
|
||||
// Restore Z fade and possibly re-enable bed leveling compensation.
|
||||
// Leveling may already be enabled due to the ENABLE_LEVELING_AFTER_G28 option.
|
||||
// TODO: Add a G28 parameter to leave leveling disabled.
|
||||
sprintf_P(cmd, PSTR("M420S%cZ%s"), '0' + (char)info.flag.leveling, dtostrf(info.fade, 1, 1, str_1));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
|
||||
#if HOME_XY_ONLY
|
||||
// The physical Z was adjusted at power-off so undo the M420S1 correction to Z with G92.9.
|
||||
sprintf_P(cmd, PSTR("G92.9Z%s"), dtostrf(z_now, 1, 1, str_1));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(POWER_LOSS_RECOVER_ZHOME)
|
||||
// Z was homed. Now move Z back up to the saved Z height, plus the POWER_LOSS_ZRAISE.
|
||||
sprintf_P(cmd, PSTR("G1Z%sF500"), dtostrf(info.current_position.z + POWER_LOSS_ZRAISE, 1, 3, str_1));
|
||||
// Z was homed down to the bed, so move up to the raised height.
|
||||
z_now = z_raised;
|
||||
sprintf_P(cmd, PSTR("G1Z%sF600"), dtostrf(z_now, 1, 3, str_1));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
#endif
|
||||
|
||||
|
|
@ -429,8 +465,23 @@ void PrintJobRecovery::resume() {
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// Select the previously active tool (with no_move)
|
||||
#if HAS_MULTI_EXTRUDER
|
||||
// Restore all hotend temperatures
|
||||
#if HAS_HOTEND
|
||||
HOTEND_LOOP() {
|
||||
const celsius_t et = info.target_temperature[e];
|
||||
if (et) {
|
||||
#if HAS_MULTI_HOTEND
|
||||
sprintf_P(cmd, PSTR("T%iS"), e);
|
||||
gcode.process_subcommands_now(cmd);
|
||||
#endif
|
||||
sprintf_P(cmd, PSTR("M109S%i"), et);
|
||||
gcode.process_subcommands_now(cmd);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
// Restore the previously active tool (with no_move)
|
||||
#if HAS_MULTI_EXTRUDER || HAS_MULTI_HOTEND
|
||||
sprintf_P(cmd, PSTR("T%i S"), info.active_extruder);
|
||||
gcode.process_subcommands_now(cmd);
|
||||
#endif
|
||||
|
|
@ -457,15 +508,6 @@ void PrintJobRecovery::resume() {
|
|||
fwretract.current_hop = info.retract_hop;
|
||||
#endif
|
||||
|
||||
#if HAS_LEVELING
|
||||
// Restore leveling state before 'G92 Z' to ensure
|
||||
// the Z stepper count corresponds to the native Z.
|
||||
if (info.fade || info.flag.leveling) {
|
||||
sprintf_P(cmd, PSTR("M420S%cZ%s"), '0' + (char)info.flag.leveling, dtostrf(info.fade, 1, 1, str_1));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if ENABLED(GRADIENT_MIX)
|
||||
memcpy(&mixer.gradient, &info.gradient, sizeof(info.gradient));
|
||||
#endif
|
||||
|
|
@ -492,14 +534,8 @@ void PrintJobRecovery::resume() {
|
|||
);
|
||||
gcode.process_subcommands_now(cmd);
|
||||
|
||||
// Move back to the saved Z
|
||||
dtostrf(info.current_position.z, 1, 3, str_1);
|
||||
#if Z_HOME_DIR > 0 || ENABLED(POWER_LOSS_RECOVER_ZHOME)
|
||||
sprintf_P(cmd, PSTR("G1 Z%s F500"), str_1);
|
||||
#else
|
||||
gcode.process_subcommands_now_P(PSTR("G1 Z0 F200"));
|
||||
sprintf_P(cmd, PSTR("G92.9 Z%s"), str_1);
|
||||
#endif
|
||||
// Move back down to the saved Z for printing
|
||||
sprintf_P(cmd, PSTR("G1Z%sF600"), dtostrf(z_print, 1, 3, str_1));
|
||||
gcode.process_subcommands_now(cmd);
|
||||
|
||||
// Restore the feedrate
|
||||
|
|
@ -552,7 +588,15 @@ void PrintJobRecovery::resume() {
|
|||
}
|
||||
DEBUG_EOL();
|
||||
|
||||
DEBUG_ECHOLNPAIR("zraise: ", info.zraise);
|
||||
DEBUG_ECHOLNPAIR("feedrate: ", info.feedrate);
|
||||
|
||||
DEBUG_ECHOLNPAIR("zraise: ", info.zraise, " ", info.flag.raised ? "(before)" : "");
|
||||
|
||||
#if ENABLED(GCODE_REPEAT_MARKERS)
|
||||
DEBUG_ECHOLNPAIR("repeat index: ", info.stored_repeat.index);
|
||||
LOOP_L_N(i, info.stored_repeat.index)
|
||||
DEBUG_ECHOLNPAIR("..... sdpos: ", info.stored_repeat.marker.sdpos, " count: ", info.stored_repeat.marker.counter);
|
||||
#endif
|
||||
|
||||
#if HAS_HOME_OFFSET
|
||||
DEBUG_ECHOPGM("home_offset: ");
|
||||
|
|
@ -572,12 +616,16 @@ void PrintJobRecovery::resume() {
|
|||
DEBUG_EOL();
|
||||
#endif
|
||||
|
||||
DEBUG_ECHOLNPAIR("feedrate: ", info.feedrate);
|
||||
|
||||
#if HAS_MULTI_EXTRUDER
|
||||
DEBUG_ECHOLNPAIR("active_extruder: ", info.active_extruder);
|
||||
#endif
|
||||
|
||||
#if DISABLED(NO_VOLUMETRICS)
|
||||
DEBUG_ECHOPGM("filament_size:");
|
||||
LOOP_L_N(i, EXTRUDERS) DEBUG_ECHOLNPAIR(" ", info.filament_size[i]);
|
||||
DEBUG_EOL();
|
||||
#endif
|
||||
|
||||
#if HAS_HOTEND
|
||||
DEBUG_ECHOPGM("target_temperature: ");
|
||||
HOTEND_LOOP() {
|
||||
|
|
@ -601,8 +649,9 @@ void PrintJobRecovery::resume() {
|
|||
#endif
|
||||
|
||||
#if HAS_LEVELING
|
||||
DEBUG_ECHOLNPAIR("leveling: ", info.flag.leveling, " fade: ", info.fade);
|
||||
DEBUG_ECHOLNPAIR("leveling: ", info.flag.leveling ? "ON" : "OFF", " fade: ", info.fade);
|
||||
#endif
|
||||
|
||||
#if ENABLED(FWRETRACT)
|
||||
DEBUG_ECHOPGM("retract: ");
|
||||
for (int8_t e = 0; e < EXTRUDERS; e++) {
|
||||
|
|
@ -612,11 +661,28 @@ void PrintJobRecovery::resume() {
|
|||
DEBUG_EOL();
|
||||
DEBUG_ECHOLNPAIR("retract_hop: ", info.retract_hop);
|
||||
#endif
|
||||
|
||||
// Mixing extruder and gradient
|
||||
#if BOTH(MIXING_EXTRUDER, GRADIENT_MIX)
|
||||
DEBUG_ECHOLNPAIR("gradient: ", info.gradient.enabled ? "ON" : "OFF");
|
||||
#endif
|
||||
|
||||
DEBUG_ECHOLNPAIR("sd_filename: ", info.sd_filename);
|
||||
DEBUG_ECHOLNPAIR("sdpos: ", info.sdpos);
|
||||
DEBUG_ECHOLNPAIR("print_job_elapsed: ", info.print_job_elapsed);
|
||||
DEBUG_ECHOLNPAIR("dryrun: ", AS_DIGIT(info.flag.dryrun));
|
||||
DEBUG_ECHOLNPAIR("allow_cold_extrusion: ", info.flag.allow_cold_extrusion);
|
||||
|
||||
DEBUG_ECHOPGM("axis_relative:");
|
||||
if (TEST(info.axis_relative, REL_X)) DEBUG_ECHOPGM(" REL_X");
|
||||
if (TEST(info.axis_relative, REL_Y)) DEBUG_ECHOPGM(" REL_Y");
|
||||
if (TEST(info.axis_relative, REL_Z)) DEBUG_ECHOPGM(" REL_Z");
|
||||
if (TEST(info.axis_relative, REL_E)) DEBUG_ECHOPGM(" REL_E");
|
||||
if (TEST(info.axis_relative, E_MODE_ABS)) DEBUG_ECHOPGM(" E_MODE_ABS");
|
||||
if (TEST(info.axis_relative, E_MODE_REL)) DEBUG_ECHOPGM(" E_MODE_REL");
|
||||
DEBUG_EOL();
|
||||
|
||||
DEBUG_ECHOLNPAIR("flag.dryrun: ", AS_DIGIT(info.flag.dryrun));
|
||||
DEBUG_ECHOLNPAIR("flag.allow_cold_extrusion: ", AS_DIGIT(info.flag.allow_cold_extrusion));
|
||||
DEBUG_ECHOLNPAIR("flag.volumetric_enabled: ", AS_DIGIT(info.flag.volumetric_enabled));
|
||||
}
|
||||
else
|
||||
DEBUG_ECHOLNPGM("INVALID DATA");
|
||||
|
|
|
|||
|
|
@ -117,6 +117,7 @@ typedef struct {
|
|||
|
||||
// Misc. Marlin flags
|
||||
struct {
|
||||
bool raised:1; // Raised before saved
|
||||
bool dryrun:1; // M111 S8
|
||||
bool allow_cold_extrusion:1; // M302 P1
|
||||
#if ENABLED(HAS_LEVELING)
|
||||
|
|
@ -182,7 +183,7 @@ class PrintJobRecovery {
|
|||
static inline void cancel() { purge(); IF_DISABLED(NO_SD_AUTOSTART, card.autofile_begin()); }
|
||||
|
||||
static void load();
|
||||
static void save(const bool force=ENABLED(SAVE_EACH_CMD_MODE), const float zraise=0);
|
||||
static void save(const bool force=ENABLED(SAVE_EACH_CMD_MODE), const float zraise=POWER_LOSS_ZRAISE, const bool raised=false);
|
||||
|
||||
#if PIN_EXISTS(POWER_LOSS)
|
||||
static inline void outage() {
|
||||
|
|
|
|||
|
|
@ -78,8 +78,6 @@ void GcodeSuite::M125() {
|
|||
// If possible, show an LCD prompt with the 'P' flag
|
||||
const bool show_lcd = TERN0(HAS_LCD_MENU, parser.boolval('P'));
|
||||
|
||||
TERN_(POWER_LOSS_RECOVERY, if (recovery.enabled) recovery.save(true));
|
||||
|
||||
if (pause_print(retract, park_point, show_lcd, 0)) {
|
||||
if (ENABLED(EXTENSIBLE_UI) || BOTH(EMERGENCY_PARSER, HOST_PROMPT_SUPPORT) || !sd_printing || show_lcd) {
|
||||
wait_for_confirmation(false, 0);
|
||||
|
|
|
|||
|
|
@ -105,7 +105,7 @@ void GcodeSuite::M25() {
|
|||
if (IS_SD_PRINTING()) card.pauseSDPrint();
|
||||
#endif
|
||||
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
#if ENABLED(POWER_LOSS_RECOVERY) && DISABLED(DGUS_LCD_UI_MKS)
|
||||
if (recovery.enabled) recovery.save(true);
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -2903,6 +2903,8 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
|
|||
#error "POWER_LOSS_RECOVER_ZHOME cannot be used with Z_SAFE_HOMING."
|
||||
#elif BOTH(POWER_LOSS_PULLUP, POWER_LOSS_PULLDOWN)
|
||||
#error "You can't enable POWER_LOSS_PULLUP and POWER_LOSS_PULLDOWN at the same time."
|
||||
#elif ENABLED(POWER_LOSS_RECOVER_ZHOME) && Z_HOME_DIR > 0
|
||||
#error "POWER_LOSS_RECOVER_ZHOME is not needed on a machine that homes to ZMAX."
|
||||
#elif BOTH(IS_CARTESIAN, POWER_LOSS_RECOVER_ZHOME) && Z_HOME_DIR < 0 && !defined(POWER_LOSS_ZHOME_POS)
|
||||
#error "POWER_LOSS_RECOVER_ZHOME requires POWER_LOSS_ZHOME_POS for a Cartesian that homes to ZMIN."
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -39,6 +39,10 @@
|
|||
#include "../../../../module/stepper/trinamic.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
#include "../../../../../feature/powerloss.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
|
||||
uint16_t distanceToMove = 10;
|
||||
#endif
|
||||
|
|
@ -78,8 +82,13 @@ constexpr feedRate_t park_speed_xy = TERN(NOZZLE_PARK_FEATURE, NOZZLE_PARK_XY_FE
|
|||
void MKS_pause_print_move() {
|
||||
queue.exhaust();
|
||||
position_before_pause = current_position;
|
||||
|
||||
// Save the current position, the raise amount, and 'already raised'
|
||||
TERN_(POWER_LOSS_RECOVERY, if (recovery.enabled) recovery.save(true, mks_park_pos.z, true));
|
||||
|
||||
destination.z = _MIN(current_position.z + mks_park_pos.z, Z_MAX_POS);
|
||||
prepare_internal_move_to_destination(park_speed_z);
|
||||
|
||||
destination.set(X_MIN_POS + mks_park_pos.x, Y_MIN_POS + mks_park_pos.y);
|
||||
prepare_internal_move_to_destination(park_speed_xy);
|
||||
}
|
||||
|
|
@ -89,6 +98,7 @@ void MKS_resume_print_move() {
|
|||
prepare_internal_move_to_destination(park_speed_xy);
|
||||
destination.z = position_before_pause.z;
|
||||
prepare_internal_move_to_destination(park_speed_z);
|
||||
TERN_(POWER_LOSS_RECOVERY, if (recovery.enabled) recovery.save(true));
|
||||
}
|
||||
|
||||
float z_offset_add = 0;
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ opt_set MOTHERBOARD BOARD_RAMBO \
|
|||
EXTRUDERS 2 TEMP_SENSOR_0 -2 TEMP_SENSOR_1 1 TEMP_SENSOR_BED 2 \
|
||||
TEMP_SENSOR_PROBE 1 TEMP_PROBE_PIN 12 \
|
||||
TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 3 HEATER_CHAMBER_PIN 45 \
|
||||
Z_HOME_DIR 1 GRID_MAX_POINTS_X 16 \
|
||||
GRID_MAX_POINTS_X 16 \
|
||||
FANMUX0_PIN 53
|
||||
opt_disable USE_ZMIN_PLUG Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN USE_WATCHDOG
|
||||
opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN USE_WATCHDOG
|
||||
opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
|
||||
FIX_MOUNTED_PROBE CODEPENDENT_XY_HOMING PIDTEMPBED PROBE_TEMP_COMPENSATION \
|
||||
PREHEAT_BEFORE_PROBING PROBING_HEATERS_OFF PROBING_FANS_OFF PROBING_STEPPERS_OFF WAIT_FOR_BED_HEATER \
|
||||
|
|
@ -32,7 +32,7 @@ opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_P
|
|||
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
|
||||
BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
|
||||
FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
|
||||
PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME \
|
||||
PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME POWER_LOSS_ZHOME_POS \
|
||||
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
|
||||
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
|
||||
opt_add DEBUG_POWER_LOSS_RECOVERY
|
||||
|
|
@ -43,7 +43,7 @@ exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear |
|
|||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMBO \
|
||||
EXTRUDERS 0 TEMP_SENSOR_0 999 DUMMY_THERMISTOR_999_VALUE 170 \
|
||||
EXTRUDERS 0 TEMP_SENSOR_0 999 DUMMY_THERMISTOR_999_VALUE 170 Z_HOME_DIR 1 \
|
||||
DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }' \
|
||||
LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }'
|
||||
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
|
||||
|
|
|
|||
Loading…
Reference in a new issue