diff --git a/Marlin/Makefile b/Marlin/Makefile index 1a9bb22087..fcd763881e 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -180,88 +180,93 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1105) else ifeq ($(HARDWARE_MOTHERBOARD),1106) # MKS v1.5 with Allegro A4982 stepper drivers else ifeq ($(HARDWARE_MOTHERBOARD),1107) -# MKS BASE 1.0 with Heroic HR4982 stepper drivers +# MKS v1.6 with Allegro A4982 stepper drivers else ifeq ($(HARDWARE_MOTHERBOARD),1108) -# MKS GEN v1.3 or 1.4 + +# MKS BASE 1.0 with Heroic HR4982 stepper drivers else ifeq ($(HARDWARE_MOTHERBOARD),1109) -# MKS GEN L +# MKS GEN v1.3 or 1.4 else ifeq ($(HARDWARE_MOTHERBOARD),1110) -# zrib V2.0 control board (Chinese knock off RAMPS replica) +# MKS GEN L else ifeq ($(HARDWARE_MOTHERBOARD),1111) -# BigTreeTech or BIQU KFB2.0 +# zrib V2.0 control board (Chinese knock off RAMPS replica) else ifeq ($(HARDWARE_MOTHERBOARD),1112) -# Felix 2.0+ Electronics Board (RAMPS like) +# BigTreeTech or BIQU KFB2.0 else ifeq ($(HARDWARE_MOTHERBOARD),1113) -# Invent-A-Part RigidBoard +# Felix 2.0+ Electronics Board (RAMPS like) else ifeq ($(HARDWARE_MOTHERBOARD),1114) -# Invent-A-Part RigidBoard V2 +# Invent-A-Part RigidBoard else ifeq ($(HARDWARE_MOTHERBOARD),1115) -# Sainsmart 2-in-1 board +# Invent-A-Part RigidBoard V2 else ifeq ($(HARDWARE_MOTHERBOARD),1116) -# Ultimaker +# Sainsmart 2-in-1 board else ifeq ($(HARDWARE_MOTHERBOARD),1117) -# Ultimaker (Older electronics. Pre 1.5.4. This is rare) +# Ultimaker else ifeq ($(HARDWARE_MOTHERBOARD),1118) +# Ultimaker (Older electronics. Pre 1.5.4. This is rare) +else ifeq ($(HARDWARE_MOTHERBOARD),1119) MCU ?= atmega1280 # Azteeg X3 -else ifeq ($(HARDWARE_MOTHERBOARD),1119) -# Azteeg X3 Pro else ifeq ($(HARDWARE_MOTHERBOARD),1120) -# Ultimainboard 2.x (Uses TEMP_SENSOR 20) +# Azteeg X3 Pro else ifeq ($(HARDWARE_MOTHERBOARD),1121) -# Rumba +# Ultimainboard 2.x (Uses TEMP_SENSOR 20) else ifeq ($(HARDWARE_MOTHERBOARD),1122) -# Raise3D Rumba +# Rumba else ifeq ($(HARDWARE_MOTHERBOARD),1123) -# Rapide Lite RL200 Rumba +# Raise3D Rumba else ifeq ($(HARDWARE_MOTHERBOARD),1124) -# Formbot T-Rex 2 Plus +# Rapide Lite RL200 Rumba else ifeq ($(HARDWARE_MOTHERBOARD),1125) -# Formbot T-Rex 3 +# Formbot T-Rex 2 Plus else ifeq ($(HARDWARE_MOTHERBOARD),1126) -# Formbot Raptor +# Formbot T-Rex 3 else ifeq ($(HARDWARE_MOTHERBOARD),1127) -# Formbot Raptor 2 +# Formbot Raptor else ifeq ($(HARDWARE_MOTHERBOARD),1128) -# bq ZUM Mega 3D +# Formbot Raptor 2 else ifeq ($(HARDWARE_MOTHERBOARD),1129) -# MakeBoard Mini v2.1.2 is a control board sold by MicroMake +# bq ZUM Mega 3D else ifeq ($(HARDWARE_MOTHERBOARD),1130) -# TriGorilla Anycubic version 1.3 based on RAMPS EFB +# MakeBoard Mini v2.1.2 is a control board sold by MicroMake else ifeq ($(HARDWARE_MOTHERBOARD),1131) -# TriGorilla Anycubic version 1.4 based on RAMPS EFB +# TriGorilla Anycubic version 1.3 based on RAMPS EFB else ifeq ($(HARDWARE_MOTHERBOARD),1132) -# TriGorilla Anycubic version 1.4 Rev 1.1 +# TriGorilla Anycubic version 1.4 based on RAMPS EFB else ifeq ($(HARDWARE_MOTHERBOARD),1133) -# Creality: Ender-4, CR-8 +# TriGorilla Anycubic version 1.4 Rev 1.1 else ifeq ($(HARDWARE_MOTHERBOARD),1134) -# Creality: CR10S, CR20, CR-X +# Creality: Ender-4, CR-8 else ifeq ($(HARDWARE_MOTHERBOARD),1135) -# Dagoma F5 +# Creality: CR10S, CR20, CR-X else ifeq ($(HARDWARE_MOTHERBOARD),1136) -# FYSETC F6 +# Dagoma F5 else ifeq ($(HARDWARE_MOTHERBOARD),1137) -# Duplicator i3 Plus +# FYSETC F6 1.3 else ifeq ($(HARDWARE_MOTHERBOARD),1138) -# VORON +# FYSETC F6 1.5 else ifeq ($(HARDWARE_MOTHERBOARD),1139) -# TRONXY V3 1.0 +# Duplicator i3 Plus else ifeq ($(HARDWARE_MOTHERBOARD),1140) -# Z-Bolt X Series +# VORON else ifeq ($(HARDWARE_MOTHERBOARD),1141) -# TT OSCAR +# TRONXY V3 1.0 else ifeq ($(HARDWARE_MOTHERBOARD),1142) -# Overlord/Overlord Pro +# Z-Bolt X Series else ifeq ($(HARDWARE_MOTHERBOARD),1143) -# ADIMLab Gantry v1 +# TT OSCAR else ifeq ($(HARDWARE_MOTHERBOARD),1144) -# ADIMLab Gantry v2 +# Overlord/Overlord Pro else ifeq ($(HARDWARE_MOTHERBOARD),1145) -# BIQU Tango V1 +# ADIMLab Gantry v1 else ifeq ($(HARDWARE_MOTHERBOARD),1146) -# MKS GEN L V2 +# ADIMLab Gantry v2 else ifeq ($(HARDWARE_MOTHERBOARD),1147) +# BIQU Tango V1 +else ifeq ($(HARDWARE_MOTHERBOARD),1148) +# MKS GEN L V2 +else ifeq ($(HARDWARE_MOTHERBOARD),1149) # # RAMBo and derivatives diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index df79e2e2e1..4e6829342d 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -59,49 +59,50 @@ #define BOARD_BAM_DICE 1103 // 2PrintBeta BAM&DICE with STK drivers #define BOARD_BAM_DICE_DUE 1104 // 2PrintBeta BAM&DICE Due with STK drivers #define BOARD_MKS_BASE 1105 // MKS BASE v1.0 -#define BOARD_MKS_BASE_14 1106 // MKS v1.4 with A4982 stepper drivers -#define BOARD_MKS_BASE_15 1107 // MKS v1.5 with Allegro A4982 stepper drivers -#define BOARD_MKS_BASE_HEROIC 1108 // MKS BASE 1.0 with Heroic HR4982 stepper drivers -#define BOARD_MKS_GEN_13 1109 // MKS GEN v1.3 or 1.4 -#define BOARD_MKS_GEN_L 1110 // MKS GEN L -#define BOARD_KFB_2 1111 // BigTreeTech or BIQU KFB2.0 -#define BOARD_ZRIB_V20 1112 // zrib V2.0 control board (Chinese knock off RAMPS replica) -#define BOARD_FELIX2 1113 // Felix 2.0+ Electronics Board (RAMPS like) -#define BOARD_RIGIDBOARD 1114 // Invent-A-Part RigidBoard -#define BOARD_RIGIDBOARD_V2 1115 // Invent-A-Part RigidBoard V2 -#define BOARD_SAINSMART_2IN1 1116 // Sainsmart 2-in-1 board -#define BOARD_ULTIMAKER 1117 // Ultimaker -#define BOARD_ULTIMAKER_OLD 1118 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) -#define BOARD_AZTEEG_X3 1119 // Azteeg X3 -#define BOARD_AZTEEG_X3_PRO 1120 // Azteeg X3 Pro -#define BOARD_ULTIMAIN_2 1121 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) -#define BOARD_RUMBA 1122 // Rumba -#define BOARD_RUMBA_RAISE3D 1123 // Raise3D N series Rumba derivative -#define BOARD_RL200 1124 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv) -#define BOARD_FORMBOT_TREX2PLUS 1125 // Formbot T-Rex 2 Plus -#define BOARD_FORMBOT_TREX3 1126 // Formbot T-Rex 3 -#define BOARD_FORMBOT_RAPTOR 1127 // Formbot Raptor -#define BOARD_FORMBOT_RAPTOR2 1128 // Formbot Raptor 2 -#define BOARD_BQ_ZUM_MEGA_3D 1129 // bq ZUM Mega 3D -#define BOARD_MAKEBOARD_MINI 1130 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake -#define BOARD_TRIGORILLA_13 1131 // TriGorilla Anycubic version 1.3-based on RAMPS EFB -#define BOARD_TRIGORILLA_14 1132 // ... Ver 1.4 -#define BOARD_TRIGORILLA_14_11 1133 // ... Rev 1.1 (new servo pin order) -#define BOARD_RAMPS_ENDER_4 1134 // Creality: Ender-4, CR-8 -#define BOARD_RAMPS_CREALITY 1135 // Creality: CR10S, CR20, CR-X -#define BOARD_RAMPS_DAGOMA 1136 // Dagoma F5 -#define BOARD_FYSETC_F6_13 1137 // FYSETC F6 1.3 -#define BOARD_FYSETC_F6_14 1138 // FYSETC F6 1.4 -#define BOARD_DUPLICATOR_I3_PLUS 1139 // Wanhao Duplicator i3 Plus -#define BOARD_VORON 1140 // VORON Design -#define BOARD_TRONXY_V3_1_0 1141 // Tronxy TRONXY-V3-1.0 -#define BOARD_Z_BOLT_X_SERIES 1142 // Z-Bolt X Series -#define BOARD_TT_OSCAR 1143 // TT OSCAR -#define BOARD_OVERLORD 1144 // Overlord/Overlord Pro -#define BOARD_HJC2560C_REV1 1145 // ADIMLab Gantry v1 -#define BOARD_HJC2560C_REV2 1146 // ADIMLab Gantry v2 -#define BOARD_TANGO 1147 // BIQU Tango V1 -#define BOARD_MKS_GEN_L_V2 1148 // MKS GEN L V2 +#define BOARD_MKS_BASE_14 1106 // MKS BASE v1.4 with Allegro A4982 stepper drivers +#define BOARD_MKS_BASE_15 1107 // MKS BASE v1.5 with Allegro A4982 stepper drivers +#define BOARD_MKS_BASE_16 1108 // MKS BASE v1.6 with Allegro A4982 stepper drivers +#define BOARD_MKS_BASE_HEROIC 1109 // MKS BASE 1.0 with Heroic HR4982 stepper drivers +#define BOARD_MKS_GEN_13 1110 // MKS GEN v1.3 or 1.4 +#define BOARD_MKS_GEN_L 1111 // MKS GEN L +#define BOARD_KFB_2 1112 // BigTreeTech or BIQU KFB2.0 +#define BOARD_ZRIB_V20 1113 // zrib V2.0 control board (Chinese knock off RAMPS replica) +#define BOARD_FELIX2 1114 // Felix 2.0+ Electronics Board (RAMPS like) +#define BOARD_RIGIDBOARD 1115 // Invent-A-Part RigidBoard +#define BOARD_RIGIDBOARD_V2 1116 // Invent-A-Part RigidBoard V2 +#define BOARD_SAINSMART_2IN1 1117 // Sainsmart 2-in-1 board +#define BOARD_ULTIMAKER 1118 // Ultimaker +#define BOARD_ULTIMAKER_OLD 1119 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) +#define BOARD_AZTEEG_X3 1120 // Azteeg X3 +#define BOARD_AZTEEG_X3_PRO 1121 // Azteeg X3 Pro +#define BOARD_ULTIMAIN_2 1122 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) +#define BOARD_RUMBA 1123 // Rumba +#define BOARD_RUMBA_RAISE3D 1124 // Raise3D N series Rumba derivative +#define BOARD_RL200 1125 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv) +#define BOARD_FORMBOT_TREX2PLUS 1126 // Formbot T-Rex 2 Plus +#define BOARD_FORMBOT_TREX3 1127 // Formbot T-Rex 3 +#define BOARD_FORMBOT_RAPTOR 1128 // Formbot Raptor +#define BOARD_FORMBOT_RAPTOR2 1129 // Formbot Raptor 2 +#define BOARD_BQ_ZUM_MEGA_3D 1130 // bq ZUM Mega 3D +#define BOARD_MAKEBOARD_MINI 1131 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake +#define BOARD_TRIGORILLA_13 1132 // TriGorilla Anycubic version 1.3-based on RAMPS EFB +#define BOARD_TRIGORILLA_14 1133 // ... Ver 1.4 +#define BOARD_TRIGORILLA_14_11 1134 // ... Rev 1.1 (new servo pin order) +#define BOARD_RAMPS_ENDER_4 1135 // Creality: Ender-4, CR-8 +#define BOARD_RAMPS_CREALITY 1136 // Creality: CR10S, CR20, CR-X +#define BOARD_RAMPS_DAGOMA 1137 // Dagoma F5 +#define BOARD_FYSETC_F6_13 1138 // FYSETC F6 1.3 +#define BOARD_FYSETC_F6_14 1139 // FYSETC F6 1.4 +#define BOARD_DUPLICATOR_I3_PLUS 1140 // Wanhao Duplicator i3 Plus +#define BOARD_VORON 1141 // VORON Design +#define BOARD_TRONXY_V3_1_0 1142 // Tronxy TRONXY-V3-1.0 +#define BOARD_Z_BOLT_X_SERIES 1143 // Z-Bolt X Series +#define BOARD_TT_OSCAR 1144 // TT OSCAR +#define BOARD_OVERLORD 1145 // Overlord/Overlord Pro +#define BOARD_HJC2560C_REV1 1146 // ADIMLab Gantry v1 +#define BOARD_HJC2560C_REV2 1147 // ADIMLab Gantry v2 +#define BOARD_TANGO 1148 // BIQU Tango V1 +#define BOARD_MKS_GEN_L_V2 1149 // MKS GEN L V2 // // RAMBo and derivatives diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 1515440e71..def3e2681b 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -110,6 +110,8 @@ #include "ramps/pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560 #elif MB(MKS_BASE_15) #include "ramps/pins_MKS_BASE_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(MKS_BASE_16) + #include "ramps/pins_MKS_BASE_16.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 #elif MB(MKS_BASE_HEROIC) #include "ramps/pins_MKS_BASE_HEROIC.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 #elif MB(MKS_GEN_13) diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE.h b/Marlin/src/pins/ramps/pins_MKS_BASE.h index dc0485e274..72e062e635 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE.h @@ -31,7 +31,9 @@ #error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_INFO_NAME "MKS BASE 1.0" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS BASE 1.0" +#endif // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_14.h b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h index e91b2c2f44..a4fe6f90c1 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE_14.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h @@ -22,7 +22,7 @@ #pragma once /** - * MKS BASE v1.4 + * MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping */ #if HOTENDS > 2 || E_STEPPERS > 2 diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_15.h b/Marlin/src/pins/ramps/pins_MKS_BASE_15.h index fe67e7d789..efb7bb23eb 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE_15.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_15.h @@ -25,6 +25,12 @@ * MKS BASE v1.5 with A4982 stepper drivers and digital micro-stepping */ +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS BASE 1.5 only supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS BASE 1.5" + #include "pins_MKS_BASE.h" /** diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_16.h b/Marlin/src/pins/ramps/pins_MKS_BASE_16.h new file mode 100644 index 0000000000..1cf2345e05 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_16.h @@ -0,0 +1,48 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * MKS BASE v1.6 with A4982 stepper drivers and digital micro-stepping + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS BASE 1.6 only supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS BASE 1.6" + +#include "pins_MKS_BASE.h" + +/** + * Microstepping pins + */ +#define X_MS1_PIN 5 // Digital 3 / Pin 5 / PE3 / SERVO2_PIN +#define X_MS2_PIN 6 // Digital 6 / Pin 14 / PH3 / SERVO1_PIN +#define Y_MS1_PIN 59 // Analog 5 / Pin 92 / PF5 +#define Y_MS2_PIN 58 // Analog 4 / Pin 93 / PF4 +#define Z_MS1_PIN 22 // Digital 22 / Pin 78 / PA0 +#define Z_MS2_PIN 39 // Digital 39 / Pin 70 / PG2 +#define E0_MS1_PIN 63 // Analog 9 / Pin 86 / PK1 +#define E0_MS2_PIN 64 // Analog 10 / Pin 87 / PK2 +#define E1_MS1_PIN 57 // Analog 3 / Pin 93 / PF3 +#define E1_MS2_PIN 4 // Digital 4 / Pin 1 / PG5 / SERVO3_PIN