0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

Merge pull request #4893 from thinkyhead/rc_stat_led_check

Browse source 
Define status LED pins without condition
This commit is contained in:
Scott Lahteine 2016-09-25 18:50:47 -05:00 committed by GitHub
parent fd64233182 5fff8d148b
commit 9cebbabd05
21 changed files with 1011 additions and 980 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
Marlin/Conditionals_post.h
View file

@ -462,10 +462,13 @@
#define HAS_SOLENOID_1 (PIN_EXISTS(SOL1)) #define HAS_SOLENOID_1 (PIN_EXISTS(SOL1))
#define HAS_SOLENOID_2 (PIN_EXISTS(SOL2)) #define HAS_SOLENOID_2 (PIN_EXISTS(SOL2))
#define HAS_SOLENOID_3 (PIN_EXISTS(SOL3)) #define HAS_SOLENOID_3 (PIN_EXISTS(SOL3))
#define HAS_MICROSTEPS (PIN_EXISTS(X_MS1)) #define HAS_MICROSTEPS_X (PIN_EXISTS(X_MS1))
#define HAS_MICROSTEPS_Y (PIN_EXISTS(Y_MS1))
#define HAS_MICROSTEPS_Z (PIN_EXISTS(Z_MS1))
#define HAS_MICROSTEPS_E0 (PIN_EXISTS(E0_MS1)) #define HAS_MICROSTEPS_E0 (PIN_EXISTS(E0_MS1))
#define HAS_MICROSTEPS_E1 (PIN_EXISTS(E1_MS1)) #define HAS_MICROSTEPS_E1 (PIN_EXISTS(E1_MS1))
#define HAS_MICROSTEPS_E2 (PIN_EXISTS(E2_MS1)) #define HAS_MICROSTEPS_E2 (PIN_EXISTS(E2_MS1))
#define HAS_MICROSTEPS (HAS_MICROSTEPS_X || HAS_MICROSTEPS_Y || HAS_MICROSTEPS_Z || HAS_MICROSTEPS_E0 || HAS_MICROSTEPS_E1 || HAS_MICROSTEPS_E2)
#define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET)) #define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET))
#define HAS_X_ENABLE (PIN_EXISTS(X_ENABLE)) #define HAS_X_ENABLE (PIN_EXISTS(X_ENABLE))
#define HAS_X2_ENABLE (PIN_EXISTS(X2_ENABLE)) #define HAS_X2_ENABLE (PIN_EXISTS(X2_ENABLE))

45
Marlin/Marlin_main.cpp
View file

@ -781,7 +781,7 @@ void setup_killpin() {
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
void setup_filrunoutpin() { void setup_filrunoutpin() {
pinMode(FIL_RUNOUT_PIN, INPUT); SET_INPUT(FIL_RUNOUT_PIN);
#if ENABLED(ENDSTOPPULLUP_FIL_RUNOUT) #if ENABLED(ENDSTOPPULLUP_FIL_RUNOUT)
WRITE(FIL_RUNOUT_PIN, HIGH); WRITE(FIL_RUNOUT_PIN, HIGH);
#endif #endif
@ -859,10 +859,9 @@ void servo_init() {
*/ */
#if HAS_STEPPER_RESET #if HAS_STEPPER_RESET
void disableStepperDrivers() { void disableStepperDrivers() {
pinMode(STEPPER_RESET_PIN, OUTPUT); OUT_WRITE(STEPPER_RESET_PIN, LOW); // drive it down to hold in reset motor driver chips
digitalWrite(STEPPER_RESET_PIN, LOW); // drive it down to hold in reset motor driver chips
} }
void enableStepperDrivers() { pinMode(STEPPER_RESET_PIN, INPUT); } // set to input, which allows it to be pulled high by pullups void enableStepperDrivers() { SET_INPUT(STEPPER_RESET_PIN); } // set to input, which allows it to be pulled high by pullups
#endif #endif
#if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0 #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
@ -6514,18 +6513,19 @@ inline void gcode_M503() {
inline void gcode_M907() { inline void gcode_M907() {
#if HAS_DIGIPOTSS #if HAS_DIGIPOTSS
LOOP_XYZE(i) LOOP_XYZE(i)
if (code_seen(axis_codes[i])) stepper.digipot_current(i, code_value_int()); if (code_seen(axis_codes[i])) stepper.digipot_current(i, code_value_int());
if (code_seen('B')) stepper.digipot_current(4, code_value_int()); if (code_seen('B')) stepper.digipot_current(4, code_value_int());
if (code_seen('S')) for (int i = 0; i <= 4; i++) stepper.digipot_current(i, code_value_int()); if (code_seen('S')) for (int i = 0; i <= 4; i++) stepper.digipot_current(i, code_value_int());
#endif #elif HAS_MOTOR_CURRENT_PWM
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
if (code_seen('X')) stepper.digipot_current(0, code_value_int()); if (code_seen('X')) stepper.digipot_current(0, code_value_int());
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
if (code_seen('Z')) stepper.digipot_current(1, code_value_int()); if (code_seen('Z')) stepper.digipot_current(1, code_value_int());
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E) #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
if (code_seen('E')) stepper.digipot_current(2, code_value_int()); if (code_seen('E')) stepper.digipot_current(2, code_value_int());
#endif
#endif #endif
#if ENABLED(DIGIPOT_I2C) #if ENABLED(DIGIPOT_I2C)
// this one uses actual amps in floating point // this one uses actual amps in floating point
@ -8718,8 +8718,8 @@ void prepare_move_to_destination() {
bool new_led = (max_temp > 55.0) ? true : (max_temp < 54.0) ? false : red_led; bool new_led = (max_temp > 55.0) ? true : (max_temp < 54.0) ? false : red_led;
if (new_led != red_led) { if (new_led != red_led) {
red_led = new_led; red_led = new_led;
digitalWrite(STAT_LED_RED, new_led ? HIGH : LOW); WRITE(STAT_LED_RED_PIN, new_led ? HIGH : LOW);
digitalWrite(STAT_LED_BLUE, new_led ? LOW : HIGH); WRITE(STAT_LED_BLUE_PIN, new_led ? LOW : HIGH);
} }
} }
} }
@ -9193,20 +9193,17 @@ void setup() {
#endif #endif
#if ENABLED(Z_PROBE_SLED) && PIN_EXISTS(SLED) #if ENABLED(Z_PROBE_SLED) && PIN_EXISTS(SLED)
pinMode(SLED_PIN, OUTPUT); OUT_WRITE(SLED_PIN, LOW); // turn it off
digitalWrite(SLED_PIN, LOW); // turn it off
#endif // Z_PROBE_SLED #endif // Z_PROBE_SLED
setup_homepin(); setup_homepin();
#ifdef STAT_LED_RED #if PIN_EXISTS(STAT_LED_RED)
pinMode(STAT_LED_RED, OUTPUT); OUT_WRITE(STAT_LED_RED_PIN, LOW); // turn it off
digitalWrite(STAT_LED_RED, LOW); // turn it off
#endif #endif
#ifdef STAT_LED_BLUE #if PIN_EXISTS(STAT_LED_BLUE)
pinMode(STAT_LED_BLUE, OUTPUT); OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // turn it off
digitalWrite(STAT_LED_BLUE, LOW); // turn it off
#endif #endif
lcd_init(); lcd_init();

21
Marlin/SanityCheck.h
View file

@ -61,10 +61,6 @@
#error "Z_LATE_ENABLE can't be used with COREXZ." #error "Z_LATE_ENABLE can't be used with COREXZ."
#elif defined(X_HOME_RETRACT_MM) #elif defined(X_HOME_RETRACT_MM)
#error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM." #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
#elif defined(BEEPER)
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
#elif defined(SDCARDDETECT)
#error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
#elif defined(SDCARDDETECTINVERTED) #elif defined(SDCARDDETECTINVERTED)
#error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration." #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
#elif defined(BTENABLED) #elif defined(BTENABLED)
@ -143,6 +139,16 @@
#error "SCARA is now MORGAN_SCARA. Please update your configuration." #error "SCARA is now MORGAN_SCARA. Please update your configuration."
#elif defined(AUTO_BED_LEVELING_GRID_POINTS) #elif defined(AUTO_BED_LEVELING_GRID_POINTS)
#error "AUTO_BED_LEVELING_GRID_POINTS is now ABL_GRID_POINTS_X and ABL_GRID_POINTS_Y. Please update your configuration." #error "AUTO_BED_LEVELING_GRID_POINTS is now ABL_GRID_POINTS_X and ABL_GRID_POINTS_Y. Please update your configuration."
#elif defined(BEEPER)
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
#elif defined(SDCARDDETECT)
#error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
#elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE)
#error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN. Please update your pins definitions."
#elif defined(LCD_PIN_BL)
#error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions."
#elif defined(LCD_PIN_RESET)
#error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions."
#endif #endif
/** /**
@ -722,6 +728,13 @@
#error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
#endif #endif
/**
* Temperature status LEDs
*/
#if ENABLED(TEMP_STAT_LEDS) && !(PIN_EXISTS(STAT_LED_RED) && PIN_EXISTS(STAT_LED_BLUE))
#error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN and STAT_LED_BLUE_PIN."
#endif
/** /**
* Basic 2-nozzle duplication mode * Basic 2-nozzle duplication mode
*/ */

10
Marlin/Sd2Card.cpp
View file

@ -302,16 +302,16 @@ bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
// set pin modes // set pin modes
pinMode(chipSelectPin_, OUTPUT); pinMode(chipSelectPin_, OUTPUT);
chipSelectHigh(); chipSelectHigh();
pinMode(SPI_MISO_PIN, INPUT); SET_INPUT(SPI_MISO_PIN);
pinMode(SPI_MOSI_PIN, OUTPUT); SET_OUTPUT(SPI_MOSI_PIN);
pinMode(SPI_SCK_PIN, OUTPUT); SET_OUTPUT(SPI_SCK_PIN);
#if DISABLED(SOFTWARE_SPI) #if DISABLED(SOFTWARE_SPI)
// SS must be in output mode even it is not chip select // SS must be in output mode even it is not chip select
pinMode(SS_PIN, OUTPUT); SET_OUTPUT(SS_PIN);
// set SS high - may be chip select for another SPI device // set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH #if SET_SPI_SS_HIGH
digitalWrite(SS_PIN, HIGH); WRITE(SS_PIN, HIGH);
#endif // SET_SPI_SS_HIGH #endif // SET_SPI_SS_HIGH
// set SCK rate for initialization commands // set SCK rate for initialization commands
spiRate_ = SPI_SD_INIT_RATE; spiRate_ = SPI_SD_INIT_RATE;

1457
Marlin/fastio.h
View file

File diff suppressed because it is too large Load diff

66
Marlin/pins_A4JP.h
View file

@ -104,53 +104,51 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 9 #define HEATER_0_PIN 9
#define HEATER_1_PIN 7 #define HEATER_1_PIN 7
#define HEATER_BED_PIN 3 #define HEATER_BED_PIN 3
#define FAN_PIN 8 #define FAN_PIN 8
#define FAN0_PIN 6 #define FAN0_PIN 6
#define FAN1_PIN 2 #define FAN1_PIN 2
#define TEMP_0_PIN 0 #define TEMP_0_PIN 0
#define TEMP_BED_PIN 7 #define TEMP_BED_PIN 7
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN 4 #define PS_ON_PIN 4
// //
// LCD / Controller // LCD / Controller
// //
#define LCD_PINS_RS 70 //ext2_5 #define LCD_PINS_RS 70 //ext2_5
#define LCD_PINS_ENABLE 71 //ext2_7 #define LCD_PINS_ENABLE 71 //ext2_7
#define LCD_PINS_D4 72 ///////Ext2 9 ? #define LCD_PINS_D4 72 ///////Ext2 9 ?
#define LCD_PINS_D5 73 ///////Ext2 11 ? #define LCD_PINS_D5 73 ///////Ext2 11 ?
#define LCD_PINS_D6 74 //ext2_13 #define LCD_PINS_D6 74 //ext2_13
#define LCD_PINS_D7 75 ///////Ext2 15 ? #define LCD_PINS_D7 75 ///////Ext2 15 ?
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#define BTN_HOME 80 //ext_16 #define BTN_HOME 80 //ext_16
#define BTN_CENTER 81 //ext_14 #define BTN_CENTER 81 //ext_14
#define BTN_ENC BTN_CENTER #define BTN_ENC BTN_CENTER
#define BTN_RIGHT 82 //ext_12 #define BTN_RIGHT 82 //ext_12
#define BTN_LEFT 83 //ext_10 #define BTN_LEFT 83 //ext_10
#define BTN_UP 84 //ext2_8 #define BTN_UP 84 //ext2_8
#define BTN_DOWN 85 //ext2_6 #define BTN_DOWN 85 //ext2_6
#define HOME_PIN BTN_HOME #define HOME_PIN BTN_HOME
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44 #define BEEPER_PIN 44
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70 #define DOGLCD_A0 70
#define DOGLCD_CS 71 #define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#if ENABLED(TEMP_STAT_LEDS) #define STAT_LED_RED_PIN 22
#define STAT_LED_RED 22 #define STAT_LED_BLUE_PIN 32
#define STAT_LED_BLUE 32
#endif
#endif // VIKI2/miniVIKI #endif // VIKI2/miniVIKI

16
Marlin/pins_AZTEEG_X3.h
View file

@ -41,16 +41,14 @@
#define DOGLCD_CS 32 #define DOGLCD_CS 32
#define BTN_ENC 12 #define BTN_ENC 12
#if ENABLED(TEMP_STAT_LEDS) #undef STAT_LED_RED_PIN
#undef STAT_LED_RED #undef STAT_LED_BLUE_PIN
#undef STAT_LED_BLUE #define STAT_LED_RED_PIN 64
#define STAT_LED_RED 64 #define STAT_LED_BLUE_PIN 63
#define STAT_LED_BLUE 63
#endif
#elif ENABLED(TEMP_STAT_LEDS) #else
#define STAT_LED_RED 6 #define STAT_LED_RED_PIN 6
#define STAT_LED_BLUE 11 #define STAT_LED_BLUE_PIN 11
#endif #endif

4
Marlin/pins_AZTEEG_X3_PRO.h
View file

@ -117,6 +117,6 @@
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN 49 // For easy adapter board #define SD_DETECT_PIN 49 // For easy adapter board
#else #else
#define STAT_LED_RED 32 #define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE 35 #define STAT_LED_BLUE_PIN 35
#endif #endif

4
Marlin/pins_CNCONTROLS_11.h
View file

@ -115,5 +115,5 @@
// //
// Misc. Functions // Misc. Functions
// //
#define STAT_LED_BLUE -1 #define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED 31 #define STAT_LED_RED_PIN 31

4
Marlin/pins_CNCONTROLS_12.h
View file

@ -111,8 +111,8 @@
//#define UI1 43 //#define UI1 43
//#define UI2 37 //#define UI2 37
#define STAT_LED_BLUE -1 #define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED 10 // TOOL_0_PWM_PIN #define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN
// //
// SD Card // SD Card

2
Marlin/pins_MEGACONTROLLER.h
View file

@ -134,7 +134,7 @@
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 47 #define DOGLCD_A0 47
#define DOGLCD_CS 45 #define DOGLCD_CS 45
#define LCD_PIN_BL 44 // backlight LED on PA3 #define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3
#define KILL_PIN 12 #define KILL_PIN 12
// GLCD features // GLCD features

4
Marlin/pins_MKS_13.h
View file

@ -120,9 +120,9 @@
#define BEEPER_PIN 25 #define BEEPER_PIN 25
// yellow RED-LED // yellow RED-LED
#define STAT_LED_RED 16 #define STAT_LED_RED_PIN 16
// white BLUE-LED // white BLUE-LED
#define STAT_LED_BLUE 17 #define STAT_LED_BLUE_PIN 17
#endif #endif

8
Marlin/pins_PRINTRBOARD.h
View file

@ -131,8 +131,8 @@
#define SDSS 45 #define SDSS 45
#define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test) #define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 12 //Non-FastIO #define STAT_LED_RED_PIN 12 //Non-FastIO
#define STAT_LED_BLUE 10 //Non-FastIO #define STAT_LED_BLUE_PIN 10 //Non-FastIO
#endif
#endif #endif

11
Marlin/pins_PRINTRBOARD_REVF.h
View file

@ -117,21 +117,18 @@
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 32 //FastIO #define BEEPER_PIN 32 //FastIO
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 42 //Non-FastIO #define DOGLCD_A0 42 //Non-FastIO
#define DOGLCD_CS 43 //Non-FastIO #define DOGLCD_CS 43 //Non-FastIO
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
//The encoder and click button (FastIO Pins) // (FastIO Pins)
#define BTN_EN1 26 #define BTN_EN1 26
#define BTN_EN2 27 #define BTN_EN2 27
#define BTN_ENC 47 #define BTN_ENC 47
#define SDSS 45 #define SDSS 45
#define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test) #define SD_DETECT_PIN -1 // FastIO (Manual says 72)
#if ENABLED(TEMP_STAT_LEDS) #define STAT_LED_RED_PIN 12 //Non-FastIO
#define STAT_LED_RED 12 //Non-FastIO #define STAT_LED_BLUE_PIN 10 //Non-FastIO
#define STAT_LED_BLUE 10 //Non-FastIO
#endif
#endif #endif

6
Marlin/pins_RAMBO.h
View file

@ -169,10 +169,8 @@
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#if ENABLED(TEMP_STAT_LEDS) #define STAT_LED_RED_PIN 22
#define STAT_LED_RED 22 #define STAT_LED_BLUE_PIN 32
#define STAT_LED_BLUE 32
#endif
#else #else

13
Marlin/pins_RAMPS.h
View file

@ -240,7 +240,7 @@
#define KILL_PIN 41 #define KILL_PIN 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER) #if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_PIN_BL 39 #define LCD_BACKLIGHT_PIN 39
#endif #endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
@ -280,10 +280,9 @@
#define KILL_PIN 31 #define KILL_PIN 31
#if ENABLED(TEMP_STAT_LEDS) #define STAT_LED_RED_PIN 32
#define STAT_LED_RED 32 #define STAT_LED_BLUE_PIN 35
#define STAT_LED_BLUE 35
#endif
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way. #define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37 #define BTN_EN2 37
@ -294,13 +293,13 @@
#define BEEPER_PIN 23 #define BEEPER_PIN 23
#define DOGLCD_CS 29 #define DOGLCD_CS 29
#define DOGLCD_A0 27 #define DOGLCD_A0 27
#define LCD_PIN_BL 33 #define LCD_BACKLIGHT_PIN 33
#elif ENABLED(MINIPANEL) #elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42 #define BEEPER_PIN 42
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 66 #define DOGLCD_CS 66
#define LCD_PIN_BL 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define SDSS 53 #define SDSS 53
#define KILL_PIN 64 #define KILL_PIN 64

4
Marlin/pins_SANGUINOLOLU_11.h
View file

@ -56,7 +56,7 @@
#if IS_MELZI #if IS_MELZI
#define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368. #define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
#elif MB(STB_11) #elif MB(STB_11)
#define LCD_PIN_BL 17 // LCD backlight LED #define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
#endif #endif
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
@ -173,7 +173,7 @@
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30 #define DOGLCD_A0 30
#define DOGLCD_CS 17 #define DOGLCD_CS 17
#define LCD_PIN_BL 28 // backlight LED on PA3 #define LCD_BACKLIGHT_PIN 28 // backlight LED on PA3
// GLCD features // GLCD features
#define LCD_CONTRAST 1 #define LCD_CONTRAST 1
// Uncomment screen orientation // Uncomment screen orientation

280
Marlin/stepper.cpp
View file

@ -733,19 +733,27 @@ void Stepper::isr() {
void Stepper::init() { void Stepper::init() {
digipot_init(); //Initialize Digipot Motor Current // Init Digipot Motor Current
microstep_init(); //Initialize Microstepping Pins #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
digipot_init();
#endif
// initialise TMC Steppers // Init Microstepping Pins
#if HAS_MICROSTEPS
microstep_init();
#endif
// Init TMC Steppers
#if ENABLED(HAVE_TMCDRIVER) #if ENABLED(HAVE_TMCDRIVER)
tmc_init(); tmc_init();
#endif #endif
// initialise L6470 Steppers
// Init L6470 Steppers
#if ENABLED(HAVE_L6470DRIVER) #if ENABLED(HAVE_L6470DRIVER)
L6470_init(); L6470_init();
#endif #endif
// Initialize Dir Pins // Init Dir Pins
#if HAS_X_DIR #if HAS_X_DIR
X_DIR_INIT; X_DIR_INIT;
#endif #endif
@ -777,8 +785,7 @@ void Stepper::init() {
E3_DIR_INIT; E3_DIR_INIT;
#endif #endif
//Initialize Enable Pins - steppers default to disabled. // Init Enable Pins - steppers default to disabled.
#if HAS_X_ENABLE #if HAS_X_ENABLE
X_ENABLE_INIT; X_ENABLE_INIT;
if (!X_ENABLE_ON) X_ENABLE_WRITE(HIGH); if (!X_ENABLE_ON) X_ENABLE_WRITE(HIGH);
@ -787,7 +794,6 @@ void Stepper::init() {
if (!X_ENABLE_ON) X2_ENABLE_WRITE(HIGH); if (!X_ENABLE_ON) X2_ENABLE_WRITE(HIGH);
#endif #endif
#endif #endif
#if HAS_Y_ENABLE #if HAS_Y_ENABLE
Y_ENABLE_INIT; Y_ENABLE_INIT;
if (!Y_ENABLE_ON) Y_ENABLE_WRITE(HIGH); if (!Y_ENABLE_ON) Y_ENABLE_WRITE(HIGH);
@ -796,7 +802,6 @@ void Stepper::init() {
if (!Y_ENABLE_ON) Y2_ENABLE_WRITE(HIGH); if (!Y_ENABLE_ON) Y2_ENABLE_WRITE(HIGH);
#endif #endif
#endif #endif
#if HAS_Z_ENABLE #if HAS_Z_ENABLE
Z_ENABLE_INIT; Z_ENABLE_INIT;
if (!Z_ENABLE_ON) Z_ENABLE_WRITE(HIGH); if (!Z_ENABLE_ON) Z_ENABLE_WRITE(HIGH);
@ -805,7 +810,6 @@ void Stepper::init() {
if (!Z_ENABLE_ON) Z2_ENABLE_WRITE(HIGH); if (!Z_ENABLE_ON) Z2_ENABLE_WRITE(HIGH);
#endif #endif
#endif #endif
#if HAS_E0_ENABLE #if HAS_E0_ENABLE
E0_ENABLE_INIT; E0_ENABLE_INIT;
if (!E_ENABLE_ON) E0_ENABLE_WRITE(HIGH); if (!E_ENABLE_ON) E0_ENABLE_WRITE(HIGH);
@ -823,9 +827,7 @@ void Stepper::init() {
if (!E_ENABLE_ON) E3_ENABLE_WRITE(HIGH); if (!E_ENABLE_ON) E3_ENABLE_WRITE(HIGH);
#endif #endif
// // Init endstops and pullups
// Init endstops and pullups here
//
endstops.init(); endstops.init();
#define _STEP_INIT(AXIS) AXIS ##_STEP_INIT #define _STEP_INIT(AXIS) AXIS ##_STEP_INIT
@ -839,7 +841,7 @@ void Stepper::init() {
#define E_AXIS_INIT(NUM) AXIS_INIT(e## NUM, E## NUM, E) #define E_AXIS_INIT(NUM) AXIS_INIT(e## NUM, E## NUM, E)
// Initialize Step Pins // Init Step Pins
#if HAS_X_STEP #if HAS_X_STEP
#if ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE) #if ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)
X2_STEP_INIT; X2_STEP_INIT;
@ -1155,143 +1157,167 @@ void Stepper::report_positions() {
// From Arduino DigitalPotControl example // From Arduino DigitalPotControl example
void Stepper::digitalPotWrite(int address, int value) { void Stepper::digitalPotWrite(int address, int value) {
digitalWrite(DIGIPOTSS_PIN, LOW); // take the SS pin low to select the chip WRITE(DIGIPOTSS_PIN, LOW); // take the SS pin low to select the chip
SPI.transfer(address); // send in the address and value via SPI: SPI.transfer(address); // send in the address and value via SPI:
SPI.transfer(value); SPI.transfer(value);
digitalWrite(DIGIPOTSS_PIN, HIGH); // take the SS pin high to de-select the chip: WRITE(DIGIPOTSS_PIN, HIGH); // take the SS pin high to de-select the chip:
//delay(10); //delay(10);
} }
#endif //HAS_DIGIPOTSS #endif //HAS_DIGIPOTSS
void Stepper::digipot_init() { #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
#if HAS_DIGIPOTSS
const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT;
SPI.begin(); void Stepper::digipot_init() {
pinMode(DIGIPOTSS_PIN, OUTPUT); #if HAS_DIGIPOTSS
for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) { static const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT;
//digitalPotWrite(digipot_ch[i], digipot_motor_current[i]); SPI.begin();
digipot_current(i, digipot_motor_current[i]); SET_OUTPUT(DIGIPOTSS_PIN);
} for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) {
#endif //digitalPotWrite(digipot_ch[i], digipot_motor_current[i]);
#if HAS_MOTOR_CURRENT_PWM digipot_current(i, digipot_motor_current[i]);
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) }
pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT); #elif HAS_MOTOR_CURRENT_PWM
digipot_current(0, motor_current_setting[0]);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
pinMode(MOTOR_CURRENT_PWM_Z_PIN, OUTPUT);
digipot_current(1, motor_current_setting[1]);
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
pinMode(MOTOR_CURRENT_PWM_E_PIN, OUTPUT);
digipot_current(2, motor_current_setting[2]);
#endif
//Set timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
TCCR5B = (TCCR5B & ~(_BV(CS50) | _BV(CS51) | _BV(CS52))) | _BV(CS50);
#endif
}
void Stepper::digipot_current(uint8_t driver, int current) {
#if HAS_DIGIPOTSS
const uint8_t digipot_ch[] = DIGIPOT_CHANNELS;
digitalPotWrite(digipot_ch[driver], current);
#elif HAS_MOTOR_CURRENT_PWM
#define _WRITE_CURRENT_PWM(P) analogWrite(P, 255L * current / (MOTOR_CURRENT_PWM_RANGE))
switch (driver) {
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
case 0: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_XY_PIN); break; SET_OUTPUT(MOTOR_CURRENT_PWM_XY_PIN);
digipot_current(0, motor_current_setting[0]);
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
case 1: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_Z_PIN); break; SET_OUTPUT(MOTOR_CURRENT_PWM_Z_PIN);
digipot_current(1, motor_current_setting[1]);
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E) #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
case 2: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_E_PIN); break; SET_OUTPUT(MOTOR_CURRENT_PWM_E_PIN);
digipot_current(2, motor_current_setting[2]);
#endif #endif
} //Set timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
#else TCCR5B = (TCCR5B & ~(_BV(CS50) | _BV(CS51) | _BV(CS52))) | _BV(CS50);
UNUSED(driver); #endif
UNUSED(current); }
#endif
}
void Stepper::microstep_init() { void Stepper::digipot_current(uint8_t driver, int current) {
#if HAS_MICROSTEPS_E1 #if HAS_DIGIPOTSS
pinMode(E1_MS1_PIN, OUTPUT); const uint8_t digipot_ch[] = DIGIPOT_CHANNELS;
pinMode(E1_MS2_PIN, OUTPUT); digitalPotWrite(digipot_ch[driver], current);
#endif #elif HAS_MOTOR_CURRENT_PWM
#define _WRITE_CURRENT_PWM(P) analogWrite(P, 255L * current / (MOTOR_CURRENT_PWM_RANGE))
switch (driver) {
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
case 0: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_XY_PIN); break;
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
case 1: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_Z_PIN); break;
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
case 2: _WRITE_CURRENT_PWM(MOTOR_CURRENT_PWM_E_PIN); break;
#endif
}
#endif
}
#if HAS_MICROSTEPS #endif
pinMode(X_MS1_PIN, OUTPUT);
pinMode(X_MS2_PIN, OUTPUT); #if HAS_MICROSTEPS
pinMode(Y_MS1_PIN, OUTPUT);
pinMode(Y_MS2_PIN, OUTPUT); /**
pinMode(Z_MS1_PIN, OUTPUT); * Software-controlled Microstepping
pinMode(Z_MS2_PIN, OUTPUT); */
pinMode(E0_MS1_PIN, OUTPUT);
pinMode(E0_MS2_PIN, OUTPUT); void Stepper::microstep_init() {
const uint8_t microstep_modes[] = MICROSTEP_MODES; SET_OUTPUT(X_MS1_PIN);
SET_OUTPUT(X_MS2_PIN);
#if HAS_MICROSTEPS_Y
SET_OUTPUT(Y_MS1_PIN);
SET_OUTPUT(Y_MS2_PIN);
#endif
#if HAS_MICROSTEPS_Z
SET_OUTPUT(Z_MS1_PIN);
SET_OUTPUT(Z_MS2_PIN);
#endif
#if HAS_MICROSTEPS_E0
SET_OUTPUT(E0_MS1_PIN);
SET_OUTPUT(E0_MS2_PIN);
#endif
#if HAS_MICROSTEPS_E1
SET_OUTPUT(E1_MS1_PIN);
SET_OUTPUT(E1_MS2_PIN);
#endif
static const uint8_t microstep_modes[] = MICROSTEP_MODES;
for (uint16_t i = 0; i < COUNT(microstep_modes); i++) for (uint16_t i = 0; i < COUNT(microstep_modes); i++)
microstep_mode(i, microstep_modes[i]); microstep_mode(i, microstep_modes[i]);
#endif }
}
/** void Stepper::microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2) {
* Software-controlled Microstepping if (ms1 >= 0) switch (driver) {
*/ case 0: digitalWrite(X_MS1_PIN, ms1); break;
#if HAS_MICROSTEPS_Y
case 1: digitalWrite(Y_MS1_PIN, ms1); break;
#endif
#if HAS_MICROSTEPS_Z
case 2: digitalWrite(Z_MS1_PIN, ms1); break;
#endif
#if HAS_MICROSTEPS_E0
case 3: digitalWrite(E0_MS1_PIN, ms1); break;
#endif
#if HAS_MICROSTEPS_E1
case 4: digitalWrite(E1_MS1_PIN, ms1); break;
#endif
}
if (ms2 >= 0) switch (driver) {
case 0: digitalWrite(X_MS2_PIN, ms2); break;
#if HAS_MICROSTEPS_Y
case 1: digitalWrite(Y_MS2_PIN, ms2); break;
#endif
#if HAS_MICROSTEPS_Z
case 2: digitalWrite(Z_MS2_PIN, ms2); break;
#endif
#if HAS_MICROSTEPS_E0
case 3: digitalWrite(E0_MS2_PIN, ms2); break;
#endif
#if HAS_MICROSTEPS_E1
case 4: digitalWrite(E1_MS2_PIN, ms2); break;
#endif
}
}
void Stepper::microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2) { void Stepper::microstep_mode(uint8_t driver, uint8_t stepping_mode) {
if (ms1 >= 0) switch (driver) { switch (stepping_mode) {
case 0: digitalWrite(X_MS1_PIN, ms1); break; case 1: microstep_ms(driver, MICROSTEP1); break;
case 1: digitalWrite(Y_MS1_PIN, ms1); break; case 2: microstep_ms(driver, MICROSTEP2); break;
case 2: digitalWrite(Z_MS1_PIN, ms1); break; case 4: microstep_ms(driver, MICROSTEP4); break;
case 3: digitalWrite(E0_MS1_PIN, ms1); break; case 8: microstep_ms(driver, MICROSTEP8); break;
case 16: microstep_ms(driver, MICROSTEP16); break;
}
}
void Stepper::microstep_readings() {
SERIAL_PROTOCOLLNPGM("MS1,MS2 Pins");
SERIAL_PROTOCOLPGM("X: ");
SERIAL_PROTOCOL(READ(X_MS1_PIN));
SERIAL_PROTOCOLLN(READ(X_MS2_PIN));
#if HAS_MICROSTEPS_Y
SERIAL_PROTOCOLPGM("Y: ");
SERIAL_PROTOCOL(READ(Y_MS1_PIN));
SERIAL_PROTOCOLLN(READ(Y_MS2_PIN));
#endif
#if HAS_MICROSTEPS_Z
SERIAL_PROTOCOLPGM("Z: ");
SERIAL_PROTOCOL(READ(Z_MS1_PIN));
SERIAL_PROTOCOLLN(READ(Z_MS2_PIN));
#endif
#if HAS_MICROSTEPS_E0
SERIAL_PROTOCOLPGM("E0: ");
SERIAL_PROTOCOL(READ(E0_MS1_PIN));
SERIAL_PROTOCOLLN(READ(E0_MS2_PIN));
#endif
#if HAS_MICROSTEPS_E1 #if HAS_MICROSTEPS_E1
case 4: digitalWrite(E1_MS1_PIN, ms1); break; SERIAL_PROTOCOLPGM("E1: ");
SERIAL_PROTOCOL(READ(E1_MS1_PIN));
SERIAL_PROTOCOLLN(READ(E1_MS2_PIN));
#endif #endif
} }
if (ms2 >= 0) switch (driver) {
case 0: digitalWrite(X_MS2_PIN, ms2); break;
case 1: digitalWrite(Y_MS2_PIN, ms2); break;
case 2: digitalWrite(Z_MS2_PIN, ms2); break;
case 3: digitalWrite(E0_MS2_PIN, ms2); break;
#if PIN_EXISTS(E1_MS2)
case 4: digitalWrite(E1_MS2_PIN, ms2); break;
#endif
}
}
void Stepper::microstep_mode(uint8_t driver, uint8_t stepping_mode) { #endif // HAS_MICROSTEPS
switch (stepping_mode) {
case 1: microstep_ms(driver, MICROSTEP1); break;
case 2: microstep_ms(driver, MICROSTEP2); break;
case 4: microstep_ms(driver, MICROSTEP4); break;
case 8: microstep_ms(driver, MICROSTEP8); break;
case 16: microstep_ms(driver, MICROSTEP16); break;
}
}
void Stepper::microstep_readings() {
SERIAL_PROTOCOLLNPGM("MS1,MS2 Pins");
SERIAL_PROTOCOLPGM("X: ");
SERIAL_PROTOCOL(digitalRead(X_MS1_PIN));
SERIAL_PROTOCOLLN(digitalRead(X_MS2_PIN));
SERIAL_PROTOCOLPGM("Y: ");
SERIAL_PROTOCOL(digitalRead(Y_MS1_PIN));
SERIAL_PROTOCOLLN(digitalRead(Y_MS2_PIN));
SERIAL_PROTOCOLPGM("Z: ");
SERIAL_PROTOCOL(digitalRead(Z_MS1_PIN));
SERIAL_PROTOCOLLN(digitalRead(Z_MS2_PIN));
SERIAL_PROTOCOLPGM("E0: ");
SERIAL_PROTOCOL(digitalRead(E0_MS1_PIN));
SERIAL_PROTOCOLLN(digitalRead(E0_MS2_PIN));
#if HAS_MICROSTEPS_E1
SERIAL_PROTOCOLPGM("E1: ");
SERIAL_PROTOCOL(digitalRead(E1_MS1_PIN));
SERIAL_PROTOCOLLN(digitalRead(E1_MS2_PIN));
#endif
}
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)

18
Marlin/stepper.h
View file

@ -239,13 +239,16 @@ class Stepper {
// //
static FORCE_INLINE bool motor_direction(AxisEnum axis) { return TEST(last_direction_bits, axis); } static FORCE_INLINE bool motor_direction(AxisEnum axis) { return TEST(last_direction_bits, axis); }
#if HAS_DIGIPOTSS #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
static void digitalPotWrite(int address, int value); static void digitalPotWrite(int address, int value);
static void digipot_current(uint8_t driver, int current);
#endif
#if HAS_MICROSTEPS
static void microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2);
static void microstep_mode(uint8_t driver, uint8_t stepping);
static void microstep_readings();
#endif #endif
static void microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2);
static void digipot_current(uint8_t driver, int current);
static void microstep_mode(uint8_t driver, uint8_t stepping);
static void microstep_readings();
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
static FORCE_INLINE void set_homing_flag(bool state) { performing_homing = state; } static FORCE_INLINE void set_homing_flag(bool state) { performing_homing = state; }
@ -380,7 +383,10 @@ class Stepper {
} }
static void digipot_init(); static void digipot_init();
static void microstep_init();
#if HAS_MICROSTEPS
static void microstep_init();
#endif
}; };

3
Marlin/stepper_dac.cpp
View file

@ -52,8 +52,7 @@
int dac_init() { int dac_init() {
#if PIN_EXISTS(DAC_DISABLE) #if PIN_EXISTS(DAC_DISABLE)
pinMode(DAC_DISABLE_PIN, OUTPUT); OUT_WRITE(DAC_DISABLE_PIN, LOW); // set pin low to enable DAC
digitalWrite(DAC_DISABLE_PIN, LOW); // set pin low to enable DAC
#endif #endif
mcp4728_init(); mcp4728_init();

10
Marlin/ultralcd_impl_DOGM.h
View file

@ -220,14 +220,12 @@ void lcd_printPGM(const char* str) {
// Initialize or re-initializw the LCD // Initialize or re-initializw the LCD
static void lcd_implementation_init() { static void lcd_implementation_init() {
#if defined(LCD_PIN_BL) && LCD_PIN_BL > -1 // Enable LCD backlight #if PIN_EXISTS(LCD_BACKLIGHT) // Enable LCD backlight
pinMode(LCD_PIN_BL, OUTPUT); OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH);
digitalWrite(LCD_PIN_BL, HIGH);
#endif #endif
#if defined(LCD_PIN_RESET) && LCD_PIN_RESET > -1 #if PIN_EXISTS(LCD_RESET)
pinMode(LCD_PIN_RESET, OUTPUT); OUT_WRITE(LCD_RESET_PIN, HIGH);
digitalWrite(LCD_PIN_RESET, HIGH);
#endif #endif
#if DISABLED(MINIPANEL) // setContrast not working for Mini Panel #if DISABLED(MINIPANEL) // setContrast not working for Mini Panel