🔨 Clean up some BTT envs, etc. (#25934)
Followup to #25921 Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Keith Bennett
GitHub
parent
54a82b4337
commit
9d830d7207
|
|
@ -466,7 +466,7 @@
|
|||
#define BOARD_BTT_SKR_SE_BX_V3 6005 // BigTreeTech SKR SE BX V3.0 (STM32H743II)
|
||||
#define BOARD_BTT_SKR_V3_0 6006 // BigTreeTech SKR V3.0 (STM32H743VG)
|
||||
#define BOARD_BTT_SKR_V3_0_EZ 6007 // BigTreeTech SKR V3.0 EZ (STM32H743VG)
|
||||
#define BOARD_BTT_OCTOPUS_MAX_EZ_V1_0 6008 // BigTreeTech Octopus Max EZ V1.0 (STM32H723VE / STM32H723ZE)
|
||||
#define BOARD_BTT_OCTOPUS_MAX_EZ_V1_0 6008 // BigTreeTech Octopus Max EZ V1.0 (STM32H723ZE)
|
||||
|
||||
//
|
||||
// Espressif ESP32 WiFi
|
||||
|
|
|
|||
|
|
@ -540,32 +540,32 @@
|
|||
#elif MB(MALYAN_M200_V2)
|
||||
#include "stm32f0/pins_MALYAN_M200_V2.h" // STM32F0 env:STM32F070RB_malyan env:STM32F070CB_malyan
|
||||
#elif MB(MALYAN_M300)
|
||||
#include "stm32f0/pins_MALYAN_M300.h" // STM32F070 env:malyan_M300
|
||||
#include "stm32f0/pins_MALYAN_M300.h" // STM32F0 env:malyan_M300
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M3
|
||||
//
|
||||
|
||||
#elif MB(STM32F103RE)
|
||||
#include "stm32f1/pins_STM32F1R.h" // STM32F103RE env:STM32F103RE env:STM32F103RE_maple
|
||||
#include "stm32f1/pins_STM32F1R.h" // STM32F1 env:STM32F103RE env:STM32F103RE_maple
|
||||
#elif MB(MALYAN_M200)
|
||||
#include "stm32f1/pins_MALYAN_M200.h" // STM32F103CB env:STM32F103CB_malyan env:STM32F103CB_malyan_maple
|
||||
#include "stm32f1/pins_MALYAN_M200.h" // STM32F1 env:STM32F103CB_malyan env:STM32F103CB_malyan_maple
|
||||
#elif MB(STM3R_MINI)
|
||||
#include "stm32f1/pins_STM3R_MINI.h" // STM32F103VE? env:STM32F103VE env:STM32F103RE_maple
|
||||
#include "stm32f1/pins_STM3R_MINI.h" // STM32F1 env:STM32F103VE env:STM32F103RE_maple
|
||||
#elif MB(GTM32_PRO_VB)
|
||||
#include "stm32f1/pins_GTM32_PRO_VB.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#include "stm32f1/pins_GTM32_PRO_VB.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#elif MB(GTM32_PRO_VD)
|
||||
#include "stm32f1/pins_GTM32_PRO_VD.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#include "stm32f1/pins_GTM32_PRO_VD.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#elif MB(GTM32_MINI)
|
||||
#include "stm32f1/pins_GTM32_MINI.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#include "stm32f1/pins_GTM32_MINI.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#elif MB(GTM32_MINI_A30)
|
||||
#include "stm32f1/pins_GTM32_MINI_A30.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#include "stm32f1/pins_GTM32_MINI_A30.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#elif MB(GTM32_REV_B)
|
||||
#include "stm32f1/pins_GTM32_REV_B.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#include "stm32f1/pins_GTM32_REV_B.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple
|
||||
#elif MB(MORPHEUS)
|
||||
#include "stm32f1/pins_MORPHEUS.h" // STM32F103RE env:STM32F103RE env:STM32F103RE_maple
|
||||
#include "stm32f1/pins_MORPHEUS.h" // STM32F1 env:STM32F103RE env:STM32F103RE_maple
|
||||
#elif MB(CHITU3D)
|
||||
#include "stm32f1/pins_CHITU3D.h" // STM32F103ZE env:STM32F103ZE env:STM32F103RE_maple
|
||||
#include "stm32f1/pins_CHITU3D.h" // STM32F1 env:STM32F103ZE env:STM32F103RE_maple
|
||||
#elif MB(MKS_ROBIN)
|
||||
#include "stm32f1/pins_MKS_ROBIN.h" // STM32F1 env:mks_robin env:mks_robin_maple
|
||||
#elif MB(MKS_ROBIN_MINI)
|
||||
|
|
@ -663,7 +663,7 @@
|
|||
#elif MB(CREALITY_V25S1)
|
||||
#include "stm32f1/pins_CREALITY_V25S1.h" // STM32F1 env:STM32F103RE_creality_smartPro env:STM32F103RE_creality_smartPro_maple
|
||||
#elif MB(CREALITY_V521)
|
||||
#include "stm32f1/pins_CREALITY_V521.h" // STM32F103VE env:STM32F103VE_creality
|
||||
#include "stm32f1/pins_CREALITY_V521.h" // STM32F1 env:STM32F103VE_creality
|
||||
#elif MB(TRIGORILLA_PRO)
|
||||
#include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro env:trigorilla_pro_maple env:trigorilla_pro_disk
|
||||
#elif MB(FLY_MINI)
|
||||
|
|
@ -671,7 +671,7 @@
|
|||
#elif MB(FLSUN_HISPEED)
|
||||
#include "stm32f1/pins_FLSUN_HISPEED.h" // STM32F1 env:flsun_hispeedv1
|
||||
#elif MB(BEAST)
|
||||
#include "stm32f1/pins_BEAST.h" // STM32F103VE? env:STM32F103VE env:STM32F103RE_maple
|
||||
#include "stm32f1/pins_BEAST.h" // STM32F1 env:STM32F103VE env:STM32F103RE_maple
|
||||
#elif MB(MINGDA_MPX_ARM_MINI)
|
||||
#include "stm32f1/pins_MINGDA_MPX_ARM_MINI.h" // STM32F1 env:mingda_mpx_arm_mini
|
||||
#elif MB(ZONESTAR_ZM3E2)
|
||||
|
|
@ -681,13 +681,13 @@
|
|||
#elif MB(ZONESTAR_ZM3E4V2)
|
||||
#include "stm32f1/pins_ZM3E4_V2_0.h" // STM32F1 env:STM32F103VE_ZM3E4V2_USB env:STM32F103VE_ZM3E4V2_USB_maple
|
||||
#elif MB(ERYONE_ERY32_MINI)
|
||||
#include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F103VET6 env:ERYONE_ERY32_MINI_maple
|
||||
#include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F1 env:ERYONE_ERY32_MINI_maple
|
||||
#elif MB(PANDA_PI_V29)
|
||||
#include "stm32f1/pins_PANDA_PI_V29.h" // STM32F103RCT6 env:PANDA_PI_V29
|
||||
#include "stm32f1/pins_PANDA_PI_V29.h" // STM32F1 env:PANDA_PI_V29
|
||||
#elif MB(SOVOL_V131)
|
||||
#include "gd32f1/pins_SOVOL_V131.h" // GD32F1 env:GD32F103RET6_sovol_maple
|
||||
#elif MB(TRIGORILLA_V006)
|
||||
#include "gd32f1/pins_TRIGORILLA_V006.h" // GD32F103 env:trigorilla_v006
|
||||
#include "gd32f1/pins_TRIGORILLA_V006.h" // GD32F1 env:trigorilla_v006
|
||||
#elif MB(KEDI_CONTROLLER_V1_2)
|
||||
#include "stm32f1/pins_KEDI_CONTROLLER_V1_2.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple
|
||||
|
||||
|
|
@ -733,7 +733,7 @@
|
|||
#elif MB(BTT_OCTOPUS_V1_1)
|
||||
#include "stm32f4/pins_BTT_OCTOPUS_V1_1.h" // STM32F4 env:STM32F446ZE_btt env:STM32F446ZE_btt_USB env:STM32F429ZG_btt env:STM32F429ZG_btt_USB env:STM32F407ZE_btt env:STM32F407ZE_btt_USB
|
||||
#elif MB(BTT_OCTOPUS_PRO_V1_0)
|
||||
#include "stm32f4/pins_BTT_OCTOPUS_PRO_V1_0.h" // STM32F4 env:STM32F446ZE_btt env:STM32F446ZE_btt_USB env:STM32F429ZG_btt env:STM32F429ZG_btt_USB env:STM32H723Zx_btt
|
||||
#include "stm32f4/pins_BTT_OCTOPUS_PRO_V1_0.h" // STM32F4 env:STM32F446ZE_btt env:STM32F446ZE_btt_USB env:STM32F429ZG_btt env:STM32F429ZG_btt_USB env:STM32H723ZE_btt
|
||||
#elif MB(LERDGE_K)
|
||||
#include "stm32f4/pins_LERDGE_K.h" // STM32F4 env:LERDGEK env:LERDGEK_usb_flash_drive
|
||||
#elif MB(LERDGE_S)
|
||||
|
|
@ -810,11 +810,11 @@
|
|||
#elif MB(BTT_SKR_SE_BX_V3)
|
||||
#include "stm32h7/pins_BTT_SKR_SE_BX_V3.h" // STM32H7 env:BTT_SKR_SE_BX
|
||||
#elif MB(BTT_SKR_V3_0)
|
||||
#include "stm32h7/pins_BTT_SKR_V3_0.h" // STM32H743Vx/STM32H723VG env:STM32H743Vx_btt env:STM32H723VG_btt
|
||||
#include "stm32h7/pins_BTT_SKR_V3_0.h" // STM32H7 env:STM32H743VI_btt env:STM32H723VG_btt
|
||||
#elif MB(BTT_SKR_V3_0_EZ)
|
||||
#include "stm32h7/pins_BTT_SKR_V3_0_EZ.h" // STM32H743Vx/STM32H723VG env:STM32H743Vx_btt env:STM32H723VG_btt
|
||||
#include "stm32h7/pins_BTT_SKR_V3_0_EZ.h" // STM32H7 env:STM32H743VI_btt env:STM32H723VG_btt
|
||||
#elif MB(BTT_OCTOPUS_MAX_EZ_V1_0)
|
||||
#include "stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h" // STM32H723Zx/STM32H723VE env:STM32H723Zx_btt env:STM32H723VE_btt
|
||||
#include "stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h" // STM32H7 env:STM32H723ZE_btt
|
||||
#elif MB(TEENSY41)
|
||||
#include "teensy4/pins_TEENSY41.h" // Teensy-4.x env:teensy41
|
||||
#elif MB(T41U5XBB)
|
||||
|
|
|
|||
|
|
@ -1,65 +0,0 @@
|
|||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m4",
|
||||
"extra_flags": "-DSTM32F401xx",
|
||||
"f_cpu": "84000000L",
|
||||
"hwids": [
|
||||
[
|
||||
"0x1EAF",
|
||||
"0x0003"
|
||||
],
|
||||
[
|
||||
"0x0483",
|
||||
"0x3748"
|
||||
]
|
||||
],
|
||||
"ldscript": "ldscript.ld",
|
||||
"mcu": "stm32f401rct6",
|
||||
"variant": "MARLIN_CREALITY_STM32F401RC"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F401RC",
|
||||
"openocd_target": "stm32f4x",
|
||||
"svd_path": "STM32F40x.svd",
|
||||
"tools": {
|
||||
"stlink": {
|
||||
"server": {
|
||||
"arguments": [
|
||||
"-f",
|
||||
"scripts/interface/stlink.cfg",
|
||||
"-c",
|
||||
"transport select hla_swd",
|
||||
"-f",
|
||||
"scripts/target/stm32f4x.cfg",
|
||||
"-c",
|
||||
"reset_config none"
|
||||
],
|
||||
"executable": "bin/openocd",
|
||||
"package": "tool-openocd"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"stm32cube"
|
||||
],
|
||||
"name": "STM32F401RC (64k RAM. 256k Flash)",
|
||||
"upload": {
|
||||
"disable_flushing": false,
|
||||
"maximum_ram_size": 65536,
|
||||
"maximum_size": 262144,
|
||||
"protocol": "stlink",
|
||||
"protocols": [
|
||||
"stlink",
|
||||
"dfu",
|
||||
"jlink"
|
||||
],
|
||||
"require_upload_port": true,
|
||||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f401rc.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
@ -1,61 +0,0 @@
|
|||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m7",
|
||||
"extra_flags": "-DSTM32H7xx -DSTM32H723xx",
|
||||
"f_cpu": "550000000L",
|
||||
"mcu": "stm32h723vet6",
|
||||
"product_line": "STM32H723xx",
|
||||
"variant": "MARLIN_H723VE"
|
||||
},
|
||||
"connectivity": [
|
||||
"can",
|
||||
"ethernet"
|
||||
],
|
||||
"debug": {
|
||||
"jlink_device": "STM32H723VE",
|
||||
"openocd_target": "stm32h7x",
|
||||
"svd_path": "STM32H7x3.svd",
|
||||
"tools": {
|
||||
"stlink": {
|
||||
"server": {
|
||||
"arguments": [
|
||||
"-f",
|
||||
"scripts/interface/stlink.cfg",
|
||||
"-c",
|
||||
"transport select hla_swd",
|
||||
"-f",
|
||||
"scripts/target/stm32h7x.cfg",
|
||||
"-c",
|
||||
"reset_config none"
|
||||
],
|
||||
"executable": "bin/openocd",
|
||||
"package": "tool-openocd"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"stm32cube"
|
||||
],
|
||||
"name": "STM32H723VE (564k RAM. 512k Flash)",
|
||||
"upload": {
|
||||
"disable_flushing": false,
|
||||
"maximum_ram_size": 577536,
|
||||
"maximum_size": 524288,
|
||||
"protocol": "stlink",
|
||||
"protocols": [
|
||||
"stlink",
|
||||
"dfu",
|
||||
"jlink",
|
||||
"cmsis-dap"
|
||||
],
|
||||
"offset_address": "0x8020000",
|
||||
"require_upload_port": true,
|
||||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32h723ve.html",
|
||||
"vendor": "ST"
|
||||
}
|
||||
|
|
@ -1,590 +0,0 @@
|
|||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2020, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
/*
|
||||
* Automatically generated from STM32H723VEHx.xml, STM32H723VETx.xml
|
||||
* STM32H723VGHx.xml, STM32H723VGTx.xml
|
||||
* STM32H730VBHx.xml, STM32H730VBTx.xml
|
||||
* STM32H733VGHx.xml, STM32H733VGTx.xml
|
||||
* CubeMX DB release 6.0.60
|
||||
*/
|
||||
#if !defined(CUSTOM_PERIPHERAL_PINS)
|
||||
#include "Arduino.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
/* =====
|
||||
* Notes:
|
||||
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
|
||||
* HW peripheral instances. You can use them the same way as any other "normal"
|
||||
* pin (i.e. analogWrite(PA7_ALT1, 128);).
|
||||
*
|
||||
* - Commented lines are alternative possibilities which are not used per default.
|
||||
* If you change them, you will have to know what you do
|
||||
* =====
|
||||
*/
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_INP16
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_INP17
|
||||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_INP14
|
||||
{PA_2_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_INP14
|
||||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_INP15
|
||||
{PA_3_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_INP15
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_INP18
|
||||
{PA_4_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC2_INP18
|
||||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC1_INP19
|
||||
{PA_5_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC2_INP19
|
||||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_INP3
|
||||
{PA_6_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_INP3
|
||||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_INP7
|
||||
{PA_7_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_INP7
|
||||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_INP9
|
||||
{PB_0_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_INP9
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_INP5
|
||||
{PB_1_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_INP5
|
||||
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_INP10
|
||||
{PC_0_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_INP10
|
||||
{PC_0_ALT2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_INP10
|
||||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_INP11
|
||||
{PC_1_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_INP11
|
||||
{PC_1_ALT2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_INP11
|
||||
{PC_2_C, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_INP0
|
||||
{PC_3_C, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_INP1
|
||||
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_INP4
|
||||
{PC_4_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_INP4
|
||||
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_INP8
|
||||
{PC_5_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_INP8
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** DAC ***
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_DAC[] = {
|
||||
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
|
||||
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_7_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
|
||||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_9_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
|
||||
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PC_9_ALT1, I2C5, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C5)},
|
||||
{PC_10, I2C5, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C5)},
|
||||
{PD_13, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PA_8_ALT1, I2C5, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C5)},
|
||||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_6_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
|
||||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_8_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
|
||||
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{PC_11, I2C5, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C5)},
|
||||
{PD_12, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** TIM ***
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_TIM[] = {
|
||||
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_0_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PA_1_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
{PA_1_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PA_2_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
{PA_2_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1
|
||||
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PA_3_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
{PA_3_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2
|
||||
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_5_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PA_6_ALT1, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PA_7_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
{PA_7_ALT3, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PB_0_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PB_1_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PB_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
|
||||
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PB_7_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
|
||||
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
|
||||
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
|
||||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_14_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
{PB_14_ALT2, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 1, 0)}, // TIM12_CH1
|
||||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_15_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
{PB_15_ALT2, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 2, 0)}, // TIM12_CH2
|
||||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_6_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PC_7_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PC_8_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PC_9_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
|
||||
{PC_12, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 0)}, // TIM15_CH1
|
||||
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PE_4, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
{PE_5, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1
|
||||
{PE_6, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2
|
||||
{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** UART ***
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)},
|
||||
{PA_9_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_12, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)},
|
||||
{PA_15, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
|
||||
{PB_4, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
|
||||
{PB_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
|
||||
{PB_6_ALT1, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
|
||||
{PB_6_ALT2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_9, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PB_13, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
|
||||
{PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_10_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_15, UART9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)},
|
||||
{PE_1, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
|
||||
{PE_3, USART10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_USART10)},
|
||||
{PE_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
|
||||
{PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)},
|
||||
{PA_10_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)},
|
||||
{PB_3, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
|
||||
{PB_5, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
|
||||
{PB_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
|
||||
{PB_7_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_8, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PB_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
|
||||
{PB_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
|
||||
{PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_11_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_14, UART9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)},
|
||||
{PE_0, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
|
||||
{PE_2, USART10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART10)},
|
||||
{PE_7, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)},
|
||||
{PA_12_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PB_14, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PB_14_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_8, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_13, UART9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)},
|
||||
{PD_15, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
|
||||
{PE_9, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)},
|
||||
{PA_11_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PB_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_9, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_0, UART9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)},
|
||||
{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_14, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
|
||||
{PE_10, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_7_ALT1, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
|
||||
{PB_2, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
|
||||
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
|
||||
{PB_5_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_3_C, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PD_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)},
|
||||
{PD_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PE_6, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{PE_14, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_6_ALT1, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
|
||||
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_4_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_2_C, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PE_5, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{PE_13, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_5_ALT1, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
|
||||
{PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PA_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_3_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
|
||||
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PC_12, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
|
||||
{PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PE_2, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{PE_12, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_0, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PA_4_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
|
||||
{PA_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_15_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PA_15_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI6)},
|
||||
{PB_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
|
||||
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PE_4, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{PE_11, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** FDCAN ***
|
||||
|
||||
#ifdef HAL_FDCAN_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_CAN_RD[] = {
|
||||
{PA_11, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{PB_5, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
|
||||
{PB_8, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{PB_12, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
|
||||
{PD_0, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{PD_12, FDCAN3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_FDCAN3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_FDCAN_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_CAN_TD[] = {
|
||||
{PA_12, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{PB_6, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
|
||||
{PB_9, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{PB_13, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
|
||||
{PD_1, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
|
||||
{PD_13, FDCAN3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_FDCAN3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** ETHERNET ***
|
||||
|
||||
#if defined(HAL_ETH_MODULE_ENABLED) || defined(HAL_ETH_LEGACY_MODULE_ENABLED)
|
||||
WEAK const PinMap PinMap_Ethernet[] = {
|
||||
{PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS
|
||||
{PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK
|
||||
{PA_1_ALT1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_CLK
|
||||
{PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO
|
||||
{PA_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL
|
||||
{PA_7, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS_DV
|
||||
{PA_7_ALT1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_DV
|
||||
{PA_9, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_ER
|
||||
{PB_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2
|
||||
{PB_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3
|
||||
{PB_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_ER
|
||||
{PB_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
|
||||
{PB_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
|
||||
{PB_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER
|
||||
{PB_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
|
||||
{PB_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
|
||||
{PB_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
|
||||
{PC_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDC
|
||||
{PC_2_C, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD2
|
||||
{PC_3_C, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_CLK
|
||||
{PC_4, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD0
|
||||
{PC_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD1
|
||||
{PE_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** OCTOSPI ***
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_DATA0[] = {
|
||||
{PA_2, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PB_1, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PB_12, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PC_3_C, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PC_9, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{PD_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_DATA1[] = {
|
||||
{PB_0, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{PC_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{PD_12, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_DATA2[] = {
|
||||
{PA_3, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{PA_7, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{PB_13, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{PC_2_C, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{PE_2, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_DATA3[] = {
|
||||
{PA_1, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{PA_6, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{PD_13, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_DATA4[] = {
|
||||
{PC_1, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4
|
||||
{PD_4, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4
|
||||
{PE_7, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_DATA5[] = {
|
||||
{PC_2_C, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO5
|
||||
{PD_5, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO5
|
||||
{PE_8, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO5
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_DATA6[] = {
|
||||
{PC_3_C, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6
|
||||
{PD_6, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6
|
||||
{PE_9, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_DATA7[] = {
|
||||
{PD_7, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO7
|
||||
{PE_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO7
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_SCLK[] = {
|
||||
{PA_3, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
|
||||
{PB_2, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_OCTOSPI_SSEL[] = {
|
||||
{PB_6, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PB_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PC_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{PE_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** USB ***
|
||||
|
||||
#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
|
||||
WEAK const PinMap PinMap_USB_OTG_HS[] = {
|
||||
#ifdef USE_USB_HS_IN_FS
|
||||
{PA_8, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_SOF
|
||||
{PA_9, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS
|
||||
{PA_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ID
|
||||
{PA_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)}, // USB_OTG_HS_DM
|
||||
{PA_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)}, // USB_OTG_HS_DP
|
||||
#else
|
||||
{PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D0
|
||||
{PA_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_CK
|
||||
{PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D1
|
||||
{PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D2
|
||||
{PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D7
|
||||
{PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D3
|
||||
{PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D4
|
||||
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D5
|
||||
{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D6
|
||||
{PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_STP
|
||||
{PC_2_C, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_DIR
|
||||
{PC_3_C, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_NXT
|
||||
#endif /* USE_USB_HS_IN_FS */
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SD ***
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SD[] = {
|
||||
{PA_0, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_SDMMC2)}, // SDMMC2_CMD
|
||||
{PB_3, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDMMC2)}, // SDMMC2_D2
|
||||
{PB_4, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDMMC2)}, // SDMMC2_D3
|
||||
{PB_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SDMMC1)}, // SDMMC1_CKIN
|
||||
{PB_8_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D4
|
||||
{PB_8_ALT2, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDMMC2)}, // SDMMC2_D4
|
||||
{PB_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SDMMC1)}, // SDMMC1_CDIR
|
||||
{PB_9_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D5
|
||||
{PB_9_ALT2, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDMMC2)}, // SDMMC2_D5
|
||||
{PB_13, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D0
|
||||
{PB_14, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDMMC2)}, // SDMMC2_D0
|
||||
{PB_15, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDMMC2)}, // SDMMC2_D1
|
||||
{PC_1, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_SDMMC2)}, // SDMMC2_CK
|
||||
{PC_4, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_SDMMC2)}, // SDMMC2_CKIN
|
||||
{PC_6, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDMMC1)}, // SDMMC1_D0DIR
|
||||
{PC_6_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D6
|
||||
{PC_6_ALT2, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDMMC2)}, // SDMMC2_D6
|
||||
{PC_7, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDMMC1)}, // SDMMC1_D123DIR
|
||||
{PC_7_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D7
|
||||
{PC_7_ALT2, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDMMC2)}, // SDMMC2_D7
|
||||
{PC_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D0
|
||||
{PC_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D1
|
||||
{PC_10, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D2
|
||||
{PC_11, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D3
|
||||
{PC_12, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDMMC1)}, // SDMMC1_CK
|
||||
{PD_2, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDMMC1)}, // SDMMC1_CMD
|
||||
{PD_6, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_SDMMC2)}, // SDMMC2_CK
|
||||
{PD_7, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_SDMMC2)}, // SDMMC2_CMD
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#endif /* !CUSTOM_PERIPHERAL_PINS */
|
||||
|
|
@ -1,108 +0,0 @@
|
|||
/* Dual pad pin name */
|
||||
PC_2_C = PC_2 | PDUAL,
|
||||
PC_3_C = PC_3 | PDUAL,
|
||||
|
||||
/* Alternate pin name */
|
||||
PA_0_ALT1 = PA_0 | ALT1,
|
||||
PA_1_ALT1 = PA_1 | ALT1,
|
||||
PA_1_ALT2 = PA_1 | ALT2,
|
||||
PA_2_ALT1 = PA_2 | ALT1,
|
||||
PA_2_ALT2 = PA_2 | ALT2,
|
||||
PA_3_ALT1 = PA_3 | ALT1,
|
||||
PA_3_ALT2 = PA_3 | ALT2,
|
||||
PA_4_ALT1 = PA_4 | ALT1,
|
||||
PA_4_ALT2 = PA_4 | ALT2,
|
||||
PA_5_ALT1 = PA_5 | ALT1,
|
||||
PA_6_ALT1 = PA_6 | ALT1,
|
||||
PA_7_ALT1 = PA_7 | ALT1,
|
||||
PA_7_ALT2 = PA_7 | ALT2,
|
||||
PA_7_ALT3 = PA_7 | ALT3,
|
||||
PA_8_ALT1 = PA_8 | ALT1,
|
||||
PA_9_ALT1 = PA_9 | ALT1,
|
||||
PA_10_ALT1 = PA_10 | ALT1,
|
||||
PA_11_ALT1 = PA_11 | ALT1,
|
||||
PA_12_ALT1 = PA_12 | ALT1,
|
||||
PA_15_ALT1 = PA_15 | ALT1,
|
||||
PA_15_ALT2 = PA_15 | ALT2,
|
||||
PB_0_ALT1 = PB_0 | ALT1,
|
||||
PB_0_ALT2 = PB_0 | ALT2,
|
||||
PB_1_ALT1 = PB_1 | ALT1,
|
||||
PB_1_ALT2 = PB_1 | ALT2,
|
||||
PB_3_ALT1 = PB_3 | ALT1,
|
||||
PB_3_ALT2 = PB_3 | ALT2,
|
||||
PB_4_ALT1 = PB_4 | ALT1,
|
||||
PB_4_ALT2 = PB_4 | ALT2,
|
||||
PB_5_ALT1 = PB_5 | ALT1,
|
||||
PB_5_ALT2 = PB_5 | ALT2,
|
||||
PB_6_ALT1 = PB_6 | ALT1,
|
||||
PB_6_ALT2 = PB_6 | ALT2,
|
||||
PB_7_ALT1 = PB_7 | ALT1,
|
||||
PB_8_ALT1 = PB_8 | ALT1,
|
||||
PB_8_ALT2 = PB_8 | ALT2,
|
||||
PB_9_ALT1 = PB_9 | ALT1,
|
||||
PB_9_ALT2 = PB_9 | ALT2,
|
||||
PB_14_ALT1 = PB_14 | ALT1,
|
||||
PB_14_ALT2 = PB_14 | ALT2,
|
||||
PB_15_ALT1 = PB_15 | ALT1,
|
||||
PB_15_ALT2 = PB_15 | ALT2,
|
||||
PC_0_ALT1 = PC_0 | ALT1,
|
||||
PC_0_ALT2 = PC_0 | ALT2,
|
||||
PC_1_ALT1 = PC_1 | ALT1,
|
||||
PC_1_ALT2 = PC_1 | ALT2,
|
||||
PC_4_ALT1 = PC_4 | ALT1,
|
||||
PC_5_ALT1 = PC_5 | ALT1,
|
||||
PC_6_ALT1 = PC_6 | ALT1,
|
||||
PC_6_ALT2 = PC_6 | ALT2,
|
||||
PC_7_ALT1 = PC_7 | ALT1,
|
||||
PC_7_ALT2 = PC_7 | ALT2,
|
||||
PC_8_ALT1 = PC_8 | ALT1,
|
||||
PC_9_ALT1 = PC_9 | ALT1,
|
||||
PC_10_ALT1 = PC_10 | ALT1,
|
||||
PC_11_ALT1 = PC_11 | ALT1,
|
||||
|
||||
/* SYS_WKUP */
|
||||
#ifdef PWR_WAKEUP_PIN1
|
||||
SYS_WKUP1 = PA_0,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN2
|
||||
SYS_WKUP2 = PA_2,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN3
|
||||
SYS_WKUP3 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN4
|
||||
SYS_WKUP4 = PC_13,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN5
|
||||
SYS_WKUP5 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN6
|
||||
SYS_WKUP6 = PC_1,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN7
|
||||
SYS_WKUP7 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN8
|
||||
SYS_WKUP8 = NC,
|
||||
#endif
|
||||
|
||||
/* USB */
|
||||
#ifdef USBCON
|
||||
USB_OTG_HS_DM = PA_11,
|
||||
USB_OTG_HS_DP = PA_12,
|
||||
USB_OTG_HS_ID = PA_10,
|
||||
USB_OTG_HS_SOF = PA_8,
|
||||
USB_OTG_HS_ULPI_CK = PA_5,
|
||||
USB_OTG_HS_ULPI_D0 = PA_3,
|
||||
USB_OTG_HS_ULPI_D1 = PB_0,
|
||||
USB_OTG_HS_ULPI_D2 = PB_1,
|
||||
USB_OTG_HS_ULPI_D3 = PB_10,
|
||||
USB_OTG_HS_ULPI_D4 = PB_11,
|
||||
USB_OTG_HS_ULPI_D5 = PB_12,
|
||||
USB_OTG_HS_ULPI_D6 = PB_13,
|
||||
USB_OTG_HS_ULPI_D7 = PB_5,
|
||||
USB_OTG_HS_ULPI_DIR = PC_2_C,
|
||||
USB_OTG_HS_ULPI_NXT = PC_3_C,
|
||||
USB_OTG_HS_ULPI_STP = PC_0,
|
||||
USB_OTG_HS_VBUS = PA_9,
|
||||
#endif
|
||||
|
|
@ -1,174 +0,0 @@
|
|||
/*
|
||||
******************************************************************************
|
||||
**
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Author : STM32CubeIDE
|
||||
**
|
||||
** Abstract : Linker script for STM32H7 series
|
||||
** 512Kbytes FLASH and 560Kbytes RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** Copyright (c) 2022 STMicroelectronics.
|
||||
** All rights reserved.
|
||||
**
|
||||
** This software is licensed under terms that can be found in the LICENSE file
|
||||
** in the root directory of this software component.
|
||||
** If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
**
|
||||
****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM_D1) + LENGTH(RAM_D1); /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200 ; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400 ; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
|
||||
DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
|
||||
RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 320K
|
||||
RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 32K
|
||||
RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 16K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
*(.RamFunc) /* .RamFunc sections */
|
||||
*(.RamFunc*) /* .RamFunc* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM_D1 AT> FLASH
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM_D1
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM_D1
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
|
@ -1,273 +0,0 @@
|
|||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2020-2021, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
#ifdef STM32H723xx
|
||||
#include "pins_arduino.h"
|
||||
|
||||
// Digital PinName array
|
||||
const PinName digitalPin[] = {
|
||||
PA_0, // D0/A0
|
||||
PA_1, // D1/A1
|
||||
PA_2, // D2/A2
|
||||
PA_3, // D3/A3
|
||||
PA_4, // D4/A4
|
||||
PA_5, // D5/A5
|
||||
PA_6, // D6/A6
|
||||
PA_7, // D7/A7
|
||||
PA_8, // D8
|
||||
PA_9, // D9
|
||||
PA_10, // D10
|
||||
PA_11, // D11
|
||||
PA_12, // D12
|
||||
PA_13, // D13
|
||||
PA_14, // D14
|
||||
PA_15, // D15
|
||||
PB_0, // D16/A8
|
||||
PB_1, // D17/A9
|
||||
PB_2, // D18
|
||||
PB_3, // D19
|
||||
PB_4, // D20
|
||||
PB_5, // D21
|
||||
PB_6, // D22
|
||||
PB_7, // D23
|
||||
PB_8, // D24
|
||||
PB_9, // D25
|
||||
PB_10, // D26
|
||||
PB_11, // D27
|
||||
PB_12, // D28
|
||||
PB_13, // D29
|
||||
PB_14, // D30
|
||||
PB_15, // D31
|
||||
PC_0, // D32/A10
|
||||
PC_1, // D33/A11
|
||||
PC_4, // D34/A12
|
||||
PC_5, // D35/A13
|
||||
PC_6, // D36
|
||||
PC_7, // D37
|
||||
PC_8, // D38
|
||||
PC_9, // D39
|
||||
PC_10, // D40
|
||||
PC_11, // D41
|
||||
PC_12, // D42
|
||||
PC_13, // D43
|
||||
PC_14, // D44
|
||||
PC_15, // D45
|
||||
PD_0, // D46
|
||||
PD_1, // D47
|
||||
PD_2, // D48
|
||||
PD_3, // D49
|
||||
PD_4, // D50
|
||||
PD_5, // D51
|
||||
PD_6, // D52
|
||||
PD_7, // D53
|
||||
PD_8, // D54
|
||||
PD_9, // D55
|
||||
PD_10, // D56
|
||||
PD_11, // D57
|
||||
PD_12, // D58
|
||||
PD_13, // D59
|
||||
PD_14, // D60
|
||||
PD_15, // D61
|
||||
PE_0, // D62
|
||||
PE_1, // D63
|
||||
PE_2, // D64
|
||||
PE_3, // D65
|
||||
PE_4, // D66
|
||||
PE_5, // D67
|
||||
PE_6, // D68
|
||||
PE_7, // D69
|
||||
PE_8, // D70
|
||||
PE_9, // D71
|
||||
PE_10, // D72
|
||||
PE_11, // D73
|
||||
PE_12, // D74
|
||||
PE_13, // D75
|
||||
PE_14, // D76
|
||||
PE_15, // D77
|
||||
PH_0, // D78
|
||||
PH_1, // D79
|
||||
PC_2_C, // D80/A14
|
||||
PC_3_C // D81/A15
|
||||
};
|
||||
|
||||
// Analog (Ax) pin number array
|
||||
const uint32_t analogInputPin[] = {
|
||||
0, // A0, PA0
|
||||
1, // A1, PA1
|
||||
2, // A2, PA2
|
||||
3, // A3, PA3
|
||||
4, // A4, PA4
|
||||
5, // A5, PA5
|
||||
6, // A6, PA6
|
||||
7, // A7, PA7
|
||||
16, // A8, PB0
|
||||
17, // A9, PB1
|
||||
32, // A10, PC0
|
||||
33, // A11, PC1
|
||||
34, // A12, PC4
|
||||
35, // A13, PC5
|
||||
80, // A14, PC2_C
|
||||
81 // A15, PC3_C
|
||||
};
|
||||
|
||||
void MPU_Config(void)
|
||||
{
|
||||
MPU_Region_InitTypeDef MPU_InitStruct = {0};
|
||||
|
||||
/* Disables the MPU */
|
||||
HAL_MPU_Disable();
|
||||
|
||||
/** Initializes and configures the Region and the memory to be protected
|
||||
*/
|
||||
MPU_InitStruct.Enable = MPU_REGION_ENABLE;
|
||||
MPU_InitStruct.Number = MPU_REGION_NUMBER0;
|
||||
MPU_InitStruct.BaseAddress = 0x0;
|
||||
MPU_InitStruct.Size = MPU_REGION_SIZE_4GB;
|
||||
MPU_InitStruct.SubRegionDisable = 0x87;
|
||||
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
|
||||
MPU_InitStruct.AccessPermission = MPU_REGION_NO_ACCESS;
|
||||
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE;
|
||||
MPU_InitStruct.IsShareable = MPU_ACCESS_SHAREABLE;
|
||||
MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
|
||||
MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
|
||||
|
||||
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
||||
/* Enables the MPU */
|
||||
HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT);
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* @brief System Clock Configuration
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
WEAK void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {};
|
||||
|
||||
MPU_Config();
|
||||
|
||||
/** Supply configuration update enable
|
||||
*/
|
||||
HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
|
||||
|
||||
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; // 48Mhz for USB
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 5; // 25Mhz / 5 = 5Mhz
|
||||
RCC_OscInitStruct.PLL.PLLN = 110; // 25Mhz / 5 * 110 = 550Mhz
|
||||
RCC_OscInitStruct.PLL.PLLP = 1; // 550Mhz / 1 = 550Mhz
|
||||
RCC_OscInitStruct.PLL.PLLQ = 10; // 550Mhz / 10 = 55Mhz
|
||||
RCC_OscInitStruct.PLL.PLLR = 10; // unused
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
|
||||
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
||||
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
||||
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB
|
||||
| RCC_PERIPHCLK_SDMMC | RCC_PERIPHCLK_ADC
|
||||
| RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_USART16
|
||||
| RCC_PERIPHCLK_USART234578 | RCC_PERIPHCLK_I2C123
|
||||
| RCC_PERIPHCLK_I2C4 | RCC_PERIPHCLK_SPI123
|
||||
| RCC_PERIPHCLK_SPI45 | RCC_PERIPHCLK_SPI6;
|
||||
|
||||
/* HSI48 used for USB 48 Mhz */
|
||||
/* PLL1 qclk also used for FMC, SDMMC, RNG, SAI */
|
||||
/* PLL2 pclk is needed for adc max 80 Mhz (p,q,r same) */
|
||||
/* PLL2 pclk also used for LP timers 2,3,4,5, SPI 1,2,3 */
|
||||
/* PLL2 qclk is needed for uart, can, spi4,5,6 80 Mhz */
|
||||
/* PLL3 r clk is needed for i2c 80 Mhz (p,q,r same) */
|
||||
PeriphClkInitStruct.PLL2.PLL2M = 15; // M DIV 15 vco 25 / 15 ~ 1.667 Mhz
|
||||
PeriphClkInitStruct.PLL2.PLL2N = 96; // N MUL 96
|
||||
PeriphClkInitStruct.PLL2.PLL2P = 2; // P div 2
|
||||
PeriphClkInitStruct.PLL2.PLL2Q = 2; // Q div 2
|
||||
PeriphClkInitStruct.PLL2.PLL2R = 2; // R div 2
|
||||
// RCC_PLL1VCIRANGE_0 Clock range frequency between 1 and 2 MHz
|
||||
PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_0;
|
||||
PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOMEDIUM;
|
||||
PeriphClkInitStruct.PLL2.PLL2FRACN = 0;
|
||||
PeriphClkInitStruct.PLL3.PLL3M = 15; // M DIV 15 vco 25 / 15 ~ 1.667 Mhz
|
||||
PeriphClkInitStruct.PLL3.PLL3N = 96; // N MUL 96
|
||||
PeriphClkInitStruct.PLL3.PLL3P = 2; // P div 2
|
||||
PeriphClkInitStruct.PLL3.PLL3Q = 2; // Q div 2
|
||||
PeriphClkInitStruct.PLL3.PLL3R = 2; // R div 2
|
||||
// RCC_PLL1VCIRANGE_0 Clock range frequency between 1 and 2 MHz
|
||||
PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_0;
|
||||
PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOMEDIUM;
|
||||
PeriphClkInitStruct.PLL3.PLL3FRACN = 0;
|
||||
// ADC from PLL2 pclk
|
||||
PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLL2;
|
||||
// USB from HSI48
|
||||
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
|
||||
// SDMMC from PLL1 qclk
|
||||
PeriphClkInitStruct.SdmmcClockSelection = 0;
|
||||
//PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL;
|
||||
// LPUART from PLL2 qclk
|
||||
PeriphClkInitStruct.Lpuart1ClockSelection = 0;
|
||||
//PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PLL2;
|
||||
// USART from PLL2 qclk
|
||||
PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_PLL2;
|
||||
// USART from PLL2 qclk
|
||||
PeriphClkInitStruct.Usart234578ClockSelection = 0;
|
||||
//PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_PLL2;
|
||||
// I2C123 from PLL3 rclk
|
||||
PeriphClkInitStruct.I2c123ClockSelection = RCC_I2C123CLKSOURCE_PLL3;
|
||||
// I2C4 from PLL3 rclk
|
||||
PeriphClkInitStruct.I2c4ClockSelection = 0;
|
||||
//PeriphClkInitStruct.I2c4ClockSelection = RCC_I2C4CLKSOURCE_PLL3;
|
||||
// SPI123 from PLL2 pclk
|
||||
PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL2;
|
||||
// SPI45 from PLL2 qclk
|
||||
PeriphClkInitStruct.Spi45ClockSelection = 0;
|
||||
//PeriphClkInitStruct.Spi45ClockSelection = RCC_SPI45CLKSOURCE_PLL2;
|
||||
// SPI6 from PLL2 qclk
|
||||
PeriphClkInitStruct.Spi6ClockSelection = 0;
|
||||
//PeriphClkInitStruct.Spi6ClockSelection = RCC_SPI6CLKSOURCE_PLL2;
|
||||
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* ARDUINO_GENERIC_* */
|
||||
|
|
@ -1,269 +0,0 @@
|
|||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2020, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* STM32 pins number
|
||||
*----------------------------------------------------------------------------*/
|
||||
#define PA0 PIN_A0
|
||||
#define PA1 PIN_A1
|
||||
#define PA2 PIN_A2
|
||||
#define PA3 PIN_A3
|
||||
#define PA4 PIN_A4
|
||||
#define PA5 PIN_A5
|
||||
#define PA6 PIN_A6
|
||||
#define PA7 PIN_A7
|
||||
#define PA8 8
|
||||
#define PA9 9
|
||||
#define PA10 10
|
||||
#define PA11 11
|
||||
#define PA12 12
|
||||
#define PA13 13
|
||||
#define PA14 14
|
||||
#define PA15 15
|
||||
#define PB0 PIN_A8
|
||||
#define PB1 PIN_A9
|
||||
#define PB2 18
|
||||
#define PB3 19
|
||||
#define PB4 20
|
||||
#define PB5 21
|
||||
#define PB6 22
|
||||
#define PB7 23
|
||||
#define PB8 24
|
||||
#define PB9 25
|
||||
#define PB10 26
|
||||
#define PB11 27
|
||||
#define PB12 28
|
||||
#define PB13 29
|
||||
#define PB14 30
|
||||
#define PB15 31
|
||||
#define PC0 PIN_A10
|
||||
#define PC1 PIN_A11
|
||||
#define PC4 PIN_A12
|
||||
#define PC5 PIN_A13
|
||||
#define PC6 36
|
||||
#define PC7 37
|
||||
#define PC8 38
|
||||
#define PC9 39
|
||||
#define PC10 40
|
||||
#define PC11 41
|
||||
#define PC12 42
|
||||
#define PC13 43
|
||||
#define PC14 44
|
||||
#define PC15 45
|
||||
#define PD0 46
|
||||
#define PD1 47
|
||||
#define PD2 48
|
||||
#define PD3 49
|
||||
#define PD4 50
|
||||
#define PD5 51
|
||||
#define PD6 52
|
||||
#define PD7 53
|
||||
#define PD8 54
|
||||
#define PD9 55
|
||||
#define PD10 56
|
||||
#define PD11 57
|
||||
#define PD12 58
|
||||
#define PD13 59
|
||||
#define PD14 60
|
||||
#define PD15 61
|
||||
#define PE0 62
|
||||
#define PE1 63
|
||||
#define PE2 64
|
||||
#define PE3 65
|
||||
#define PE4 66
|
||||
#define PE5 67
|
||||
#define PE6 68
|
||||
#define PE7 69
|
||||
#define PE8 70
|
||||
#define PE9 71
|
||||
#define PE10 72
|
||||
#define PE11 73
|
||||
#define PE12 74
|
||||
#define PE13 75
|
||||
#define PE14 76
|
||||
#define PE15 77
|
||||
#define PH0 78
|
||||
#define PH1 79
|
||||
#define PC2_C PIN_A14
|
||||
#define PC3_C PIN_A15
|
||||
#define PC2 PC2_C
|
||||
#define PC3 PC3_C
|
||||
|
||||
// Alternate pins number
|
||||
#define PA0_ALT1 (PA0 | ALT1)
|
||||
#define PA1_ALT1 (PA1 | ALT1)
|
||||
#define PA1_ALT2 (PA1 | ALT2)
|
||||
#define PA2_ALT1 (PA2 | ALT1)
|
||||
#define PA2_ALT2 (PA2 | ALT2)
|
||||
#define PA3_ALT1 (PA3 | ALT1)
|
||||
#define PA3_ALT2 (PA3 | ALT2)
|
||||
#define PA4_ALT1 (PA4 | ALT1)
|
||||
#define PA4_ALT2 (PA4 | ALT2)
|
||||
#define PA5_ALT1 (PA5 | ALT1)
|
||||
#define PA6_ALT1 (PA6 | ALT1)
|
||||
#define PA7_ALT1 (PA7 | ALT1)
|
||||
#define PA7_ALT2 (PA7 | ALT2)
|
||||
#define PA7_ALT3 (PA7 | ALT3)
|
||||
#define PA8_ALT1 (PA8 | ALT1)
|
||||
#define PA9_ALT1 (PA9 | ALT1)
|
||||
#define PA10_ALT1 (PA10 | ALT1)
|
||||
#define PA11_ALT1 (PA11 | ALT1)
|
||||
#define PA12_ALT1 (PA12 | ALT1)
|
||||
#define PA15_ALT1 (PA15 | ALT1)
|
||||
#define PA15_ALT2 (PA15 | ALT2)
|
||||
#define PB0_ALT1 (PB0 | ALT1)
|
||||
#define PB0_ALT2 (PB0 | ALT2)
|
||||
#define PB1_ALT1 (PB1 | ALT1)
|
||||
#define PB1_ALT2 (PB1 | ALT2)
|
||||
#define PB3_ALT1 (PB3 | ALT1)
|
||||
#define PB3_ALT2 (PB3 | ALT2)
|
||||
#define PB4_ALT1 (PB4 | ALT1)
|
||||
#define PB4_ALT2 (PB4 | ALT2)
|
||||
#define PB5_ALT1 (PB5 | ALT1)
|
||||
#define PB5_ALT2 (PB5 | ALT2)
|
||||
#define PB6_ALT1 (PB6 | ALT1)
|
||||
#define PB6_ALT2 (PB6 | ALT2)
|
||||
#define PB7_ALT1 (PB7 | ALT1)
|
||||
#define PB8_ALT1 (PB8 | ALT1)
|
||||
#define PB8_ALT2 (PB8 | ALT2)
|
||||
#define PB9_ALT1 (PB9 | ALT1)
|
||||
#define PB9_ALT2 (PB9 | ALT2)
|
||||
#define PB14_ALT1 (PB14 | ALT1)
|
||||
#define PB14_ALT2 (PB14 | ALT2)
|
||||
#define PB15_ALT1 (PB15 | ALT1)
|
||||
#define PB15_ALT2 (PB15 | ALT2)
|
||||
#define PC0_ALT1 (PC0 | ALT1)
|
||||
#define PC0_ALT2 (PC0 | ALT2)
|
||||
#define PC1_ALT1 (PC1 | ALT1)
|
||||
#define PC1_ALT2 (PC1 | ALT2)
|
||||
#define PC4_ALT1 (PC4 | ALT1)
|
||||
#define PC5_ALT1 (PC5 | ALT1)
|
||||
#define PC6_ALT1 (PC6 | ALT1)
|
||||
#define PC6_ALT2 (PC6 | ALT2)
|
||||
#define PC7_ALT1 (PC7 | ALT1)
|
||||
#define PC7_ALT2 (PC7 | ALT2)
|
||||
#define PC8_ALT1 (PC8 | ALT1)
|
||||
#define PC9_ALT1 (PC9 | ALT1)
|
||||
#define PC10_ALT1 (PC10 | ALT1)
|
||||
#define PC11_ALT1 (PC11 | ALT1)
|
||||
|
||||
#define NUM_DIGITAL_PINS 82
|
||||
#define NUM_DUALPAD_PINS 2
|
||||
#define NUM_ANALOG_INPUTS 16
|
||||
|
||||
// On-board LED pin number
|
||||
#ifndef LED_BUILTIN
|
||||
#define LED_BUILTIN PNUM_NOT_DEFINED
|
||||
#endif
|
||||
|
||||
// On-board user button
|
||||
#ifndef USER_BTN
|
||||
#define USER_BTN PNUM_NOT_DEFINED
|
||||
#endif
|
||||
|
||||
// SPI definitions
|
||||
#ifndef PIN_SPI_SS
|
||||
#define PIN_SPI_SS PA4
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS1
|
||||
#define PIN_SPI_SS1 PA15
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS2
|
||||
#define PIN_SPI_SS2 PNUM_NOT_DEFINED
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS3
|
||||
#define PIN_SPI_SS3 PNUM_NOT_DEFINED
|
||||
#endif
|
||||
#ifndef PIN_SPI_MOSI
|
||||
#define PIN_SPI_MOSI PA7
|
||||
#endif
|
||||
#ifndef PIN_SPI_MISO
|
||||
#define PIN_SPI_MISO PA6
|
||||
#endif
|
||||
#ifndef PIN_SPI_SCK
|
||||
#define PIN_SPI_SCK PA5
|
||||
#endif
|
||||
|
||||
// I2C definitions
|
||||
#ifndef PIN_WIRE_SDA
|
||||
#define PIN_WIRE_SDA PB7
|
||||
#endif
|
||||
#ifndef PIN_WIRE_SCL
|
||||
#define PIN_WIRE_SCL PB6
|
||||
#endif
|
||||
|
||||
// Timer Definitions
|
||||
// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
|
||||
#ifndef TIMER_TONE
|
||||
#define TIMER_TONE TIM6
|
||||
#endif
|
||||
#ifndef TIMER_SERVO
|
||||
#define TIMER_SERVO TIM7
|
||||
#endif
|
||||
|
||||
// UART Definitions
|
||||
#ifndef SERIAL_UART_INSTANCE
|
||||
#define SERIAL_UART_INSTANCE 4
|
||||
#endif
|
||||
|
||||
// Default pin used for generic 'Serial' instance
|
||||
// Mandatory for Firmata
|
||||
#ifndef PIN_SERIAL_RX
|
||||
#define PIN_SERIAL_RX PA1
|
||||
#endif
|
||||
#ifndef PIN_SERIAL_TX
|
||||
#define PIN_SERIAL_TX PA0
|
||||
#endif
|
||||
|
||||
// Extra HAL modules
|
||||
#if !defined(HAL_DAC_MODULE_DISABLED)
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
#endif
|
||||
#if !defined(HAL_ETH_MODULE_DISABLED)
|
||||
#define HAL_ETH_MODULE_ENABLED
|
||||
#endif
|
||||
#if !defined(HAL_OSPI_MODULE_DISABLED)
|
||||
#define HAL_OSPI_MODULE_ENABLED
|
||||
#endif
|
||||
#if !defined(HAL_SD_MODULE_DISABLED)
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#ifndef SERIAL_PORT_MONITOR
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#endif
|
||||
#ifndef SERIAL_PORT_HARDWARE
|
||||
#define SERIAL_PORT_HARDWARE Serial
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -72,5 +72,11 @@ extends = renamed
|
|||
[env:BIGTREE_OCTOPUS_V1_F407_USB] ;=> STM32F407ZE_btt_USB
|
||||
extends = renamed
|
||||
|
||||
[env:STM32H723Vx_btt] ;=> STM32H723VE_btt or STM32H723VG_btt
|
||||
[env:STM32H723Vx_btt] ;=> STM32H723VG_btt
|
||||
extends = renamed
|
||||
|
||||
[env:STM32H723Zx_btt] ;=> STM32H723ZE_btt
|
||||
extends = renamed
|
||||
|
||||
[env:STM32H743Vx_btt] ;=> STM32H743VI_btt
|
||||
extends = renamed
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
# 7 : Cortex M7 core (0:M0, 1-2:M3, 3-4:M4, 7:M7)
|
||||
# 43 : Line/Features
|
||||
# I : 176 pins (T:36, C:48 or 49, M:81, V:100, Z:144, I:176)
|
||||
# I : 2048KB Flash-memory (C:256KB, D:384KB, E:512KB, G:1024KB)
|
||||
# I : 2048KB Flash-memory (C:256KB, D:384KB, E:512KB, G:1024KB, I:2048KB)
|
||||
# T : LQFP package
|
||||
# 6 : -40...85°C (7: ...105°C)
|
||||
#
|
||||
|
|
@ -40,13 +40,12 @@ upload_protocol = cmsis-dap
|
|||
debug_tool = cmsis-dap
|
||||
|
||||
#
|
||||
# BigTreeTech SKR V3.0 / V3.0 EZ (STM32H743VIT6 ARM Cortex-M7)
|
||||
# BigTreeTech STM32H743Vx ARM Cortex-M7 Common
|
||||
#
|
||||
[env:STM32H743Vx_btt]
|
||||
[STM32H743Vx_btt]
|
||||
extends = stm32_variant
|
||||
platform = ststm32@15.4.1
|
||||
platform_packages = framework-arduinoststm32@~4.20200.220530
|
||||
board = marlin_STM32H743Vx
|
||||
board_build.offset = 0x20000
|
||||
board_upload.offset_address = 0x08020000
|
||||
build_flags = ${stm32_variant.build_flags}
|
||||
|
|
@ -60,6 +59,13 @@ build_flags = ${stm32_variant.build_flags}
|
|||
upload_protocol = cmsis-dap
|
||||
debug_tool = cmsis-dap
|
||||
|
||||
#
|
||||
# BigTreeTech SKR V3.0 / V3.0 EZ (STM32H743VIT6 ARM Cortex-M7)
|
||||
#
|
||||
[env:STM32H743VI_btt]
|
||||
extends = STM32H743Vx_btt
|
||||
board = marlin_STM32H743VI
|
||||
|
||||
#
|
||||
# BigTreeTech STM32H723Vx ARM Cortex-M7 Common
|
||||
#
|
||||
|
|
@ -85,13 +91,6 @@ build_flags = ${stm32_variant.build_flags}
|
|||
upload_protocol = cmsis-dap
|
||||
debug_tool = cmsis-dap
|
||||
|
||||
#
|
||||
# BigTreeTech Octopus Max EZ V1.0 (STM32H723VET6 ARM Cortex-M7)
|
||||
#
|
||||
[env:STM32H723VE_btt]
|
||||
extends = STM32H723Vx_btt
|
||||
board = marlin_STM32H723VE
|
||||
|
||||
#
|
||||
# BigTreeTech SKR V3.0 / SKR V3.0 EZ (STM32H723VGT6 ARM Cortex-M7)
|
||||
#
|
||||
|
|
@ -100,13 +99,12 @@ extends = STM32H723Vx_btt
|
|||
board = marlin_STM32H723VG
|
||||
|
||||
#
|
||||
# BigTreeTech Octopus Pro V1.0 / Octopus Max EZ V1.0 (STM32H723ZET6 ARM Cortex-M7)
|
||||
# BigTreeTech STM32H723Zx ARM Cortex-M7 Common
|
||||
#
|
||||
[env:STM32H723Zx_btt]
|
||||
[STM32H723Zx_btt]
|
||||
extends = stm32_variant
|
||||
platform = ststm32@15.4.1
|
||||
platform_packages = framework-arduinoststm32@~4.20200.220530
|
||||
board = marlin_STM32H723Zx
|
||||
board_build.offset = 0x20000
|
||||
board_upload.offset_address = 0x08020000
|
||||
build_flags = ${stm32_variant.build_flags}
|
||||
|
|
@ -124,3 +122,10 @@ build_flags = ${stm32_variant.build_flags}
|
|||
-UI2C5_BASE
|
||||
upload_protocol = cmsis-dap
|
||||
debug_tool = cmsis-dap
|
||||
|
||||
#
|
||||
# BigTreeTech Octopus Pro V1.0 / Octopus Max EZ V1.0 (STM32H723ZET6 ARM Cortex-M7)
|
||||
#
|
||||
[env:STM32H723ZE_btt]
|
||||
extends = STM32H723Zx_btt
|
||||
board = marlin_STM32H723ZE
|
||||
|
|
|
|||
Loading…
Reference in a new issue