📌 PandaPi V2.9 – Standalone mode (#23908)
This commit is contained in:
Mark
GitHub
parent
1f1571f726
commit
a02a1def62
|
|
@ -364,6 +364,7 @@
|
|||
#define BOARD_ZONESTAR_ZM3E4 4061 // Zonestar ZM3E4 V1 (STM32F103VC)
|
||||
#define BOARD_ZONESTAR_ZM3E4V2 4062 // Zonestar ZM3E4 V2 (STM32F103VC)
|
||||
#define BOARD_ERYONE_ERY32_MINI 4063 // Eryone Ery32 mini (STM32F103VE)
|
||||
#define BOARD_PANDA_PI_V29 4064 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
|
|
|||
|
|
@ -601,6 +601,8 @@
|
|||
#include "stm32f1/pins_ZM3E4_V2_0.h" // STM32F1 env:STM32F103VE_ZM3E4V2_USB env:STM32F103VE_ZM3E4V2_USB_maple
|
||||
#elif MB(ERYONE_ERY32_MINI)
|
||||
#include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F103VET6 env:ERYONE_ERY32_MINI_maple
|
||||
#elif MB(PANDA_PI_V29)
|
||||
#include "stm32f1/pins_PANDA_PI_V29.h" // STM32F103RCT6 env:PANDA_PI_V29
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
|
|
|||
222
Marlin/src/pins/stm32f1/pins_PANDA_PI_V29.h
Normal file
222
Marlin/src/pins/stm32f1/pins_PANDA_PI_V29.h
Normal file
|
|
@ -0,0 +1,222 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#define BOARD_INFO_NAME "PANDA PI V2.9"
|
||||
|
||||
// Release PB3/PB4 (TMC_SW Pins) from JTAG pins
|
||||
#define DISABLE_JTAG
|
||||
|
||||
// Ignore temp readings during development.
|
||||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
||||
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PA11 // SERVOS
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PA3 // X-STOP
|
||||
#define Y_STOP_PIN PC9 // Y-STOP
|
||||
#define Z_STOP_PIN PA1 // Z-STOP
|
||||
|
||||
//
|
||||
// Z Probe must be this pin
|
||||
//
|
||||
//#define Z_MIN_PROBE_PIN PA1 // PROBE
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
//#ifndef FIL_RUNOUT_PIN
|
||||
// #define FIL_RUNOUT_PIN PC2 // E0-STOP
|
||||
//#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC12
|
||||
#define X_STEP_PIN PC11
|
||||
#define X_DIR_PIN PB6
|
||||
|
||||
#define Y_ENABLE_PIN PC12
|
||||
#define Y_STEP_PIN PB5
|
||||
#define Y_DIR_PIN PB4
|
||||
|
||||
#define Z_ENABLE_PIN PC12
|
||||
#define Z_STEP_PIN PB3
|
||||
#define Z_DIR_PIN PA15
|
||||
|
||||
#define E0_ENABLE_PIN PC12
|
||||
#define E0_STEP_PIN PB15
|
||||
#define E0_DIR_PIN PB14
|
||||
|
||||
//
|
||||
// Software SPI pins for TMC2130 stepper drivers
|
||||
//
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#ifndef TMC_SW_MOSI
|
||||
#define TMC_SW_MOSI PB5
|
||||
#endif
|
||||
#ifndef TMC_SW_MISO
|
||||
#define TMC_SW_MISO PB4
|
||||
#endif
|
||||
#ifndef TMC_SW_SCK
|
||||
#define TMC_SW_SCK PB3
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_TMC_UART
|
||||
/**
|
||||
* TMC2208/TMC2209 stepper drivers
|
||||
*
|
||||
* Hardware serial communication ports.
|
||||
* If undefined software serial is used according to the pins below
|
||||
*/
|
||||
//#define X_HARDWARE_SERIAL MSerial1
|
||||
//#define Y_HARDWARE_SERIAL MSerial1
|
||||
//#define Z_HARDWARE_SERIAL MSerial1
|
||||
//#define E0_HARDWARE_SERIAL MSerial1
|
||||
|
||||
#define X_SERIAL_TX_PIN PC10
|
||||
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
|
||||
|
||||
#define Y_SERIAL_TX_PIN PC11
|
||||
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
|
||||
|
||||
#define Z_SERIAL_TX_PIN PC12
|
||||
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
|
||||
|
||||
#define E0_SERIAL_TX_PIN PD2
|
||||
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
|
||||
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PB0 // Analog Input "TH0"
|
||||
#define TEMP_BED_PIN PB1 // Analog Input "TB0"
|
||||
#define TEMP_1_PIN PA2
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PB12 // "HE"
|
||||
#define HEATER_BED_PIN PB13 // "HB"
|
||||
#define FAN_PIN PA8 // "FAN0"
|
||||
#define HEATER_1_PIN PA12
|
||||
|
||||
//
|
||||
// SD Support
|
||||
//
|
||||
#define ONBOARD_SPI_DEVICE 1 // SPI1
|
||||
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
||||
#define SDSS ONBOARD_SD_CS_PIN
|
||||
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
#if SD_CONNECTION_IS(ONBOARD)
|
||||
//#define SD_DETECT_PIN PA4
|
||||
#define SD_SCK_PIN PA5
|
||||
#define SD_MISO_PIN PA6
|
||||
#define SD_MOSI_PIN PA7
|
||||
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||
#error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP."
|
||||
#endif
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if HAS_WIRED_LCD
|
||||
#define BTN_ENC PA0
|
||||
#define BTN_EN1 PC4
|
||||
#define BTN_EN2 PC5
|
||||
|
||||
#define LCD_PINS_RS PC0
|
||||
#define LCD_PINS_ENABLE PC2
|
||||
#define LCD_PINS_D4 PC1
|
||||
#endif
|
||||
|
||||
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
||||
|
||||
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. Comment out this line to continue."
|
||||
|
||||
/** FYSETC TFT TFT81050 display pinout
|
||||
*
|
||||
* Board Display
|
||||
* ----- -----
|
||||
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
|
||||
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10)
|
||||
* (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI)
|
||||
* RESET | 7 8 | PA9 (MOD_RESET) (PA15) SD_DET | 7 8 | RESET
|
||||
* (BEEPER) PB6 | 9 10| PA15 (SD_DET) GND | 9 10| 5V
|
||||
* ----- -----
|
||||
* EXP1 EXP1
|
||||
*
|
||||
* Needs custom cable:
|
||||
*
|
||||
* Board Adapter Display
|
||||
* _________
|
||||
* EXP1-1 ----------- EXP1-10
|
||||
* EXP1-2 ----------- EXP1-9
|
||||
* SPI1-4 ----------- EXP1-6
|
||||
* EXP1-4 ----------- EXP1-5
|
||||
* SP11-3 ----------- EXP1-2
|
||||
* EXP1-6 ----------- EXP1-4
|
||||
* EXP1-7 ----------- EXP1-8
|
||||
* EXP1-8 ----------- EXP1-3
|
||||
* SPI1-1 ----------- EXP1-1
|
||||
* EXP1-10 ----------- EXP1-7
|
||||
*/
|
||||
|
||||
#define CLCD_SPI_BUS 1 // SPI1 connector
|
||||
|
||||
#define BEEPER_PIN PB6
|
||||
|
||||
#define CLCD_MOD_RESET PA9
|
||||
#define CLCD_SPI_CS PB8
|
||||
|
||||
#if SD_CONNECTION_IS(LCD) && BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
||||
#define SD_DETECT_PIN PA15
|
||||
#define SD_SS_PIN PA10
|
||||
#endif
|
||||
|
||||
#elif HAS_WIRED_LCD
|
||||
|
||||
#define BEEPER_PIN PC3
|
||||
|
||||
#endif
|
||||
|
|
@ -73,6 +73,17 @@ build_flags = ${env:STM32F103RC_btt.build_flags}
|
|||
-DUSBD_USE_CDC_MSC
|
||||
build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC
|
||||
|
||||
#
|
||||
# Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||
# Headless, without direct Pi control, but potentially hosting OctoPrint, stepdaemon, etc.
|
||||
#
|
||||
[env:PANDA_PI_V29]
|
||||
extends = common_STM32F103RC_variant
|
||||
build_flags = ${common_STM32F103RC_variant.build_flags}
|
||||
-DTIMER_SERVO=TIM1
|
||||
board_build.offset = 0x5000
|
||||
board_upload.offset_address = 0x08005000
|
||||
|
||||
#
|
||||
# MKS Robin (STM32F103ZET6)
|
||||
# Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
|
||||
|
|
|
|||
Loading…
Reference in a new issue