From a2572d2854f16bd8a6d41722bd8de18dd54563d4 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 28 Aug 2016 09:51:06 -0500 Subject: [PATCH] Fix Danish encoding and an error message --- Marlin/SanityCheck.h | 2 +- Marlin/language_da.h | 85 ++++++++++++++++++++++---------------------- 2 files changed, 44 insertions(+), 43 deletions(-) diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 78645ea116..e7e9031bbd 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -134,7 +134,7 @@ #elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS) #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT Please update your configuration." #elif !defined(MIN_STEPS_PER_SEGMENT) - #error "\"dropsegments\" is replaced with MIN_STEPS_PER_SEGMENT (and increases by 1). Please update Configuration_adv.h." + #error "dropsegments" is replaced with MIN_STEPS_PER_SEGMENT (and increases by 1). Please update Configuration_adv.h. #elif defined(PREVENT_DANGEROUS_EXTRUDE) #error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration." #endif diff --git a/Marlin/language_da.h b/Marlin/language_da.h index 88fa8bc294..2cf28dec40 100644 --- a/Marlin/language_da.h +++ b/Marlin/language_da.h @@ -39,19 +39,19 @@ #define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters #define MSG_MAIN "Menu" #define MSG_AUTOSTART "Autostart" -#define MSG_DISABLE_STEPPERS "Slå alle steppere fra" +#define MSG_DISABLE_STEPPERS "SlÃ¥ alle steppere fra" #define MSG_AUTO_HOME "Auto Home" // G28 #define MSG_AUTO_HOME_X "Home X" #define MSG_AUTO_HOME_Y "Home Y" #define MSG_AUTO_HOME_Z "Home Z" #define MSG_LEVEL_BED_HOMING "Homing XYZ" -#define MSG_LEVEL_BED_WAITING "Klik når du er klar" -#define MSG_LEVEL_BED_NEXT_POINT "Næste punkt" -#define MSG_LEVEL_BED_DONE "Bed level er færdig!" +#define MSG_LEVEL_BED_WAITING "Klik nÃ¥r du er klar" +#define MSG_LEVEL_BED_NEXT_POINT "Næste punkt" +#define MSG_LEVEL_BED_DONE "Bed level er færdig!" #define MSG_LEVEL_BED_CANCEL "Annuller bed level" -#define MSG_SET_HOME_OFFSETS "Sæt forsk. af home" +#define MSG_SET_HOME_OFFSETS "Sæt forsk. af home" #define MSG_HOME_OFFSETS_APPLIED "Forsk. er nu aktiv" -#define MSG_SET_ORIGIN "Sæt origin" +#define MSG_SET_ORIGIN "Sæt origin" #define MSG_PREHEAT_1 "Forvarm PLA" #define MSG_PREHEAT_1_N "Forvarm PLA " #define MSG_PREHEAT_1_ALL "Forvarm PLA Alle" @@ -62,9 +62,9 @@ #define MSG_PREHEAT_2_ALL "Forvarm ABS Alle" #define MSG_PREHEAT_2_BEDONLY "Forvarm ABS Bed" #define MSG_PREHEAT_2_SETTINGS "Forvarm ABS conf" -#define MSG_COOLDOWN "Afkøl" -#define MSG_SWITCH_PS_ON "Slå strøm til" -#define MSG_SWITCH_PS_OFF "Slå strøm fra" +#define MSG_COOLDOWN "Afkøl" +#define MSG_SWITCH_PS_ON "SlÃ¥ strøm til" +#define MSG_SWITCH_PS_OFF "SlÃ¥ strøm fra" #define MSG_EXTRUDE "Extruder" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Flyt akser" @@ -81,7 +81,7 @@ #define MSG_NOZZLE "Dyse" #define MSG_BED "Plade" -#define MSG_FAN_SPEED "Blæser hastighed" +#define MSG_FAN_SPEED "Blæser hastighed" #define MSG_FLOW "Flow" #define MSG_CONTROL "Kontrol" #define MSG_MIN " \002 Min" @@ -94,7 +94,7 @@ #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" -#define MSG_SELECT "Vælg" +#define MSG_SELECT "Vælg" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" @@ -110,7 +110,7 @@ #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" #define MSG_TEMPERATURE "Temperatur" -#define MSG_MOTION "Bevægelse" +#define MSG_MOTION "Bevægelse" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." @@ -119,24 +119,24 @@ #define MSG_LOAD_EPROM "Hent fra EEPROM" #define MSG_RESTORE_FAILSAFE "Gendan failsafe" #define MSG_REFRESH "Genopfrisk" -#define MSG_WATCH "Info skærm" +#define MSG_WATCH "Info skærm" #define MSG_PREPARE "Forbered" #define MSG_TUNE "Tune" #define MSG_PAUSE_PRINT "Pause printet" -#define MSG_RESUME_PRINT "Forsæt printet" +#define MSG_RESUME_PRINT "Forsæt printet" #define MSG_STOP_PRINT "Stop printet" #define MSG_CARD_MENU "Print fra SD" #define MSG_NO_CARD "Intet SD kort" #define MSG_DWELL "Dvale..." -#define MSG_USERWAIT "Venter på bruger..." -#define MSG_RESUMING "Forsætter printet" +#define MSG_USERWAIT "Venter pÃ¥ bruger..." +#define MSG_RESUMING "Forsætter printet" #define MSG_PRINT_ABORTED "Print annulleret" -#define MSG_NO_MOVE "Ingen bevægelse." -#define MSG_KILLED "DRÆBT. " +#define MSG_NO_MOVE "Ingen bevægelse." +#define MSG_KILLED "DRÆBT. " #define MSG_STOPPED "STOPPET. " -#define MSG_CONTROL_RETRACT "Tilbagetræk mm" +#define MSG_CONTROL_RETRACT "Tilbagetræk mm" #define MSG_CONTROL_RETRACT_SWAP "Skift Re.mm" -#define MSG_CONTROL_RETRACTF "Tilbagetræk V" +#define MSG_CONTROL_RETRACTF "Tilbagetræk V" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm" @@ -147,7 +147,7 @@ #define MSG_CNG_SDCARD "Skift SD kort" #define MSG_ZPROBE_OUT "Probe udenfor plade" #define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST -#define MSG_FIRST "først" +#define MSG_FIRST "først" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" @@ -155,7 +155,7 @@ #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_HEATING_FAILED_LCD "Opvarmning fejlet" #define MSG_ERR_REDUNDANT_TEMP "Fejl: reserve temp" -#define MSG_THERMAL_RUNAWAY "Temp løber løbsk" +#define MSG_THERMAL_RUNAWAY "Temp løber løbsk" #define MSG_ERR_MAXTEMP "Fejl: MAKSTEMP" #define MSG_ERR_MINTEMP "Fejl: MINTEMP" #define MSG_ERR_MAXTEMP_BED "Fejl: MAKSTEMP PLADE" @@ -186,49 +186,50 @@ #if LCD_WIDTH > 19 #define MSG_INFO_PRINT_COUNT "Antal Print" - #define MSG_INFO_COMPLETED_PRINTS "Færdige" + #define MSG_INFO_COMPLETED_PRINTS "Færdige" #define MSG_INFO_PRINT_TIME "Total print tid" - #define MSG_INFO_PRINT_LONGEST "Længste print tid" + #define MSG_INFO_PRINT_LONGEST "Længste print tid" #define MSG_INFO_PRINT_FILAMENT "Total extruderet" #else #define MSG_INFO_PRINT_COUNT "Prints" - #define MSG_INFO_COMPLETED_PRINTS "Færdige" + #define MSG_INFO_COMPLETED_PRINTS "Færdige" #define MSG_INFO_PRINT_TIME "Total" - #define MSG_INFO_PRINT_LONGEST "Længste" + #define MSG_INFO_PRINT_LONGEST "Længste" #define MSG_INFO_PRINT_FILAMENT "Extruderet" #endif #define MSG_INFO_MIN_TEMP "Min Temp" #define MSG_INFO_MAX_TEMP "Max Temp" -#define MSG_INFO_PSU "Strømforsyning" +#define MSG_INFO_PSU "Strømforsyning" #define MSG_FILAMENT_CHANGE_HEADER "SKIFT FILAMENT" #define MSG_FILAMENT_CHANGE_OPTION_HEADER "SKIFTE MULIGHEDER:" #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruder mere" -#define MSG_FILAMENT_CHANGE_OPTION_RESUME "forsæt print" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME "forsæt print" #if LCD_HEIGHT >= 4 - #define MSG_FILAMENT_CHANGE_INIT_1 "Vent på" + #define MSG_FILAMENT_CHANGE_INIT_1 "Vent pÃ¥" #define MSG_FILAMENT_CHANGE_INIT_2 "skift af " #define MSG_FILAMENT_CHANGE_INIT_3 "filament" - #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vent på" - #define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament tømning" - #define MSG_FILAMENT_CHANGE_INSERT_1 "indsæt filament" + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vent pÃ¥" + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament tømning" + #define MSG_FILAMENT_CHANGE_INSERT_1 "indsæt filament" #define MSG_FILAMENT_CHANGE_INSERT_2 "og tryk for" - #define MSG_FILAMENT_CHANGE_INSERT_3 "at fortsætte..." - #define MSG_FILAMENT_CHANGE_LOAD_1 "Vent på" - #define MSG_FILAMENT_CHANGE_LOAD_2 "filament fødning" - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vent på" + #define MSG_FILAMENT_CHANGE_INSERT_3 "at fortsætte..." + #define MSG_FILAMENT_CHANGE_LOAD_1 "Vent pÃ¥" + #define MSG_FILAMENT_CHANGE_LOAD_2 "filament fødning" + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vent pÃ¥" #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrudere" - #define MSG_FILAMENT_CHANGE_RESUME_1 "Vent på at" - #define MSG_FILAMENT_CHANGE_RESUME_2 "print forsætter" + #define MSG_FILAMENT_CHANGE_RESUME_1 "Vent pÃ¥ at" + #define MSG_FILAMENT_CHANGE_RESUME_2 "print forsætter" #else // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_INIT_1 "Vent venligst..." - #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Tømmer..." - #define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt og klik" - #define MSG_FILAMENT_CHANGE_LOAD_1 "Føder..." + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Tømmer..." + #define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt og klik" + #define MSG_FILAMENT_CHANGE_LOAD_1 "Føder..." #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrudere..." - #define MSG_FILAMENT_CHANGE_RESUME_1 "Fortsætter..." + #define MSG_FILAMENT_CHANGE_RESUME_1 "Fortsætter..." #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_DA_H +