Prettier BLTouch menu items (#18682)
This commit is contained in:
parent
afce012960
commit
a3795e3e48
|
@ -645,8 +645,8 @@
|
|||
* Do not activate settings that the probe might not understand. Clones might misunderstand
|
||||
* advanced commands.
|
||||
*
|
||||
* Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
|
||||
* check the wiring of the BROWN, RED and ORANGE wires.
|
||||
* Note: If the probe is not deploying, do a "Reset" and "Self-Test" and then check the
|
||||
* wiring of the BROWN, RED and ORANGE wires.
|
||||
*
|
||||
* Note: If the trigger signal of your probe is not being recognized, it has been very often
|
||||
* because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
|
||||
|
|
|
@ -414,14 +414,14 @@ namespace Language_en {
|
|||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z Probe Past Bed");
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Skew Factor");
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Stow");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Deploy");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Stow");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Deploy");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain");
|
||||
|
|
|
@ -385,14 +385,14 @@ namespace Language_es {
|
|||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonda Z fuera cama");
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Factor de desviación");
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Auto-Prueba");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reiniciar");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Subir pistón");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Bajar pistón");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Modo Software");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Modo 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Modo OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Modo almacenar");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Auto-Prueba");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reiniciar");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Subir pistón");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Bajar pistón");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Modo Software");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Modo 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Modo OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Modo almacenar");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Poner BLTouch a 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Poner BLTouch a OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Informe de drenaje");
|
||||
|
|
|
@ -372,13 +372,13 @@ namespace Language_fr {
|
|||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonde Z hors lit");
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Facteur écart");
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Ranger");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Déployer");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Mode SW");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Mode 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Mode OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Ranger");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Déployer");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Mode SW");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Mode 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Mode OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Appliquer Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Mise en 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Mise en OD");
|
||||
|
|
|
@ -407,14 +407,14 @@ namespace Language_gl {
|
|||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonda-Z fóra Cama");
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Factor de Desviación");
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Auto-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reiniciar");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Recoller");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Estender");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Modo Software");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Modo 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Modo OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Modo Almacenar");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Auto-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reiniciar");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Recoller");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Estender");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Modo Software");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Modo 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Modo OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Modo Almacenar");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Axustar BLTouch a 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Axustar BLTouch a OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Modo de Informe");
|
||||
|
|
|
@ -409,14 +409,14 @@ namespace Language_hu {
|
|||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z szonda tálcán kivül");
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Ferdeség Faktor");
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Önteszt");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Visszaállítás");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Elhelyez");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Telepít");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mód");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mód");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mód");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Módok");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Önteszt");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Visszaállítás");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Elhelyez");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Telepít");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mód");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mód");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mód");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Módok");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("BLTouch 5V Mód");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("BLTouch OD Mód");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Jelentés");
|
||||
|
|
|
@ -360,12 +360,12 @@ namespace Language_pl {
|
|||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Stow");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Deploy");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Stow");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Deploy");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain");
|
||||
|
|
|
@ -412,14 +412,14 @@ namespace Language_ro {
|
|||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z Probe Past Bed");
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Skew Factor");
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Stow");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Deploy");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Stow");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Deploy");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mode");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain");
|
||||
|
|
|
@ -400,14 +400,14 @@ namespace Language_sk {
|
|||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonda Z mimo podl.");
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Faktor skosenia");
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Zasunúť");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Vysunúť");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Režim SW");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Režim 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Režim OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Ulož. režim");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Self-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Zasunúť");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Vysunúť");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Režim SW");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Režim 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Režim OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Ulož. režim");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Prepnúť do 5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Prepnúť do OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Zobraziť režim");
|
||||
|
|
|
@ -385,13 +385,13 @@ namespace Language_tr {
|
|||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Çarpıklık Faktörü");
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch K. Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Kapat");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Aç");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Modu");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Modu");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Modu");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Kapat");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Aç");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW-Modu");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V-Modu");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD-Modu");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("BLTouch 5V Ayarla");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("BLTouch OD Ayarla");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Drenaj Raporu");
|
||||
|
|
|
@ -411,14 +411,14 @@ namespace Language_zh_CN {
|
|||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); //"Z probe out. bed" Z probe is not within the physical limits
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("偏斜因数"); // "Skew Factor"
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch"
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: 自检");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: 重置");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: 装载");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: 部署");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW模式");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V模式");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD模式");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: 模式保存");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("自检");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("重置");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("装载");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("部署");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW模式");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V模式");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD模式");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("模式保存");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("设置BLTouch为5V");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("设置BLTouch为OD");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("报告Drain");
|
||||
|
|
Loading…
Reference in a new issue