From a3b098b4bee1c44b59e0ab9195ae1640c938ac44 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Wed, 6 Dec 2017 13:54:58 -0600
Subject: [PATCH] Whitespace clean

---
 Marlin/src/HAL/HAL_LPC1768/spi_pins.h | 16 ++++++++--------
 Marlin/src/pins/pins_MELZI_CREALITY.h |  2 +-
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h
index 3eec6d45d8..4016b1f72d 100644
--- a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h
+++ b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h
@@ -26,22 +26,22 @@
 #include "../../inc/MarlinConfig.h"
 
 #if MB(MKS_SBASE)
-  
-#define LPC_SOFTWARE_SPI  // MKS_SBASE needs a software SPI because the 
+
+#define LPC_SOFTWARE_SPI  // MKS_SBASE needs a software SPI because the
                           // selected pins are not on a hardware SPI controller
 
-// A custom cable is needed. See the README file in the 
+// A custom cable is needed. See the README file in the
 // Marlin\src\config\examples\Mks\Sbase directory
 
 #define SCK_PIN           P1_22  // J8-2 (moved from EXP2 P0.7)
-#define MISO_PIN          P1_23  // J8-3 (moved from EXP2 P0.8)  
-#define MOSI_PIN          P2_12  // J8-4 (moved from EXP2 P0.5)  
-#define SS_PIN            P0_28  
+#define MISO_PIN          P1_23  // J8-3 (moved from EXP2 P0.8)
+#define MOSI_PIN          P2_12  // J8-4 (moved from EXP2 P0.5)
+#define SS_PIN            P0_28
 
 #else
 
-#define LPC_SOFTWARE_SPI  // Re-ARM board needs a software SPI because using the 
-                          // standard LCD adapter results in the LCD and the 
+#define LPC_SOFTWARE_SPI  // Re-ARM board needs a software SPI because using the
+                          // standard LCD adapter results in the LCD and the
                           // SD card sharing a single SPI when the RepRap Full
                           // Graphic Smart Controller is selected
 
diff --git a/Marlin/src/pins/pins_MELZI_CREALITY.h b/Marlin/src/pins/pins_MELZI_CREALITY.h
index 477a9b8e07..02f8491102 100644
--- a/Marlin/src/pins/pins_MELZI_CREALITY.h
+++ b/Marlin/src/pins/pins_MELZI_CREALITY.h
@@ -60,7 +60,7 @@
 #define ST7920_DELAY_3 DELAY_2_NOP
 
 #if ENABLED(MINIPANEL)
-  #undef DOGLCD_CS    
+  #undef DOGLCD_CS
   #define DOGLCD_CS        LCD_PINS_RS
 #endif