0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

Store servo angles in EEPROM

Browse source
This commit is contained in:
Jan 2018-08-07 17:04:46 +02:00 committed by Scott Lahteine
parent 9953213513
commit aa80e448e2
10 changed files with 141 additions and 19 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

56
Marlin/src/gcode/config/M281.cpp Normal file
View file

@ -0,0 +1,56 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS
#include "../gcode.h"
#include "../../module/servo.h"
void GcodeSuite::M281() {
if (!parser.seen('P')) return;
const int servo_index = parser.value_int();
if (WITHIN(servo_index, 0, NUM_SERVOS - 1)) {
bool angle_change = false;
if (parser.seen('L')) {
servo_angles[servo_index][0] = parser.value_int();
angle_change = true;
}
if (parser.seen('U')) {
servo_angles[servo_index][1] = parser.value_int();
angle_change = true;
}
if (!angle_change) {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" Servo ", servo_index);
SERIAL_ECHOPAIR(" L", servo_angles[servo_index][0]);
SERIAL_ECHOLNPAIR(" U", servo_angles[servo_index][1]);
}
}
else {
SERIAL_ERROR_START();
SERIAL_ECHOPAIR("Servo ", servo_index);
SERIAL_ECHOLNPGM(" out of range");
}
}
#endif

12
Marlin/src/gcode/config/M43.cpp
View file

@ -103,8 +103,8 @@ inline void servo_probe_test() {
SERIAL_PROTOCOLLNPGM("Servo probe test");
SERIAL_PROTOCOLLNPAIR(". using index: ", probe_index);
SERIAL_PROTOCOLLNPAIR(". deploy angle: ", z_servo_angle[0]);
SERIAL_PROTOCOLLNPAIR(". stow angle: ", z_servo_angle[1]);
SERIAL_PROTOCOLLNPAIR(". deploy angle: ", servo_angles[probe_index][0]);
SERIAL_PROTOCOLLNPAIR(". stow angle: ", servo_angles[probe_index][1]);
bool probe_inverting;
@ -146,10 +146,10 @@ inline void servo_probe_test() {
uint8_t i = 0;
bool deploy_state, stow_state;
do {
MOVE_SERVO(probe_index, z_servo_angle[0]); //deploy
MOVE_SERVO(probe_index, servo_angles[Z_PROBE_SERVO_NR][0]); //deploy
safe_delay(500);
deploy_state = READ(PROBE_TEST_PIN);
MOVE_SERVO(probe_index, z_servo_angle[1]); //stow
MOVE_SERVO(probe_index, servo_angles[Z_PROBE_SERVO_NR][1]); //stow
safe_delay(500);
stow_state = READ(PROBE_TEST_PIN);
} while (++i < 4);
@ -170,7 +170,7 @@ inline void servo_probe_test() {
#endif
}
else { // measure active signal length
MOVE_SERVO(probe_index, z_servo_angle[0]); // deploy
MOVE_SERVO(probe_index, servo_angles[Z_PROBE_SERVO_NR][0]); // deploy
safe_delay(500);
SERIAL_PROTOCOLLNPGM("please trigger probe");
uint16_t probe_counter = 0;
@ -194,7 +194,7 @@ inline void servo_probe_test() {
else
SERIAL_PROTOCOLLNPGM("noise detected - please re-run test"); // less than 2mS pulse
MOVE_SERVO(probe_index, z_servo_angle[1]); //stow
MOVE_SERVO(probe_index, servo_angles[Z_PROBE_SERVO_NR][1]); //stow
} // pulse detected

1
Marlin/src/gcode/gcode.cpp
View file

@ -487,6 +487,7 @@ void GcodeSuite::process_parsed_command(
#if HAS_SERVOS
case 280: M280(); break; // M280: Set servo position absolute
case 281: M281(); break;
#endif
#if ENABLED(BABYSTEPPING)

2
Marlin/src/gcode/gcode.h
View file

@ -172,6 +172,7 @@
* M260 - i2c Send Data (Requires EXPERIMENTAL_I2CBUS)
* M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS)
* M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos)
* M281 - Set servo min|max position: "M281 P<index> L<min> U<max>". (Requires servos)
* M290 - Babystepping (Requires BABYSTEPPING)
* M300 - Play beep sound S<frequency Hz> P<duration ms>
* M301 - Set PID parameters P I and D. (Requires PIDTEMP)
@ -627,6 +628,7 @@ private:
#if HAS_SERVOS
static void M280();
static void M281();
#endif
#if ENABLED(BABYSTEPPING)

70
Marlin/src/module/configuration_store.cpp
View file

@ -37,7 +37,7 @@
*/
// Change EEPROM version if the structure changes
#define EEPROM_VERSION "V55"
#define EEPROM_VERSION "V56"
#define EEPROM_OFFSET 100
// Check the integrity of data offsets.
@ -70,6 +70,10 @@
#include "../feature/bedlevel/bedlevel.h"
#endif
#if HAS_SERVOS
#include "servo.h"
#endif
#if HAS_BED_PROBE
#include "../module/probe.h"
#endif
@ -174,6 +178,13 @@ typedef struct SettingsDataStruct {
bool planner_leveling_active; // M420 S planner.leveling_active
int8_t ubl_storage_slot; // ubl.storage_slot
//
// SERVO_ANGLES
//
#if HAS_SERVOS
uint8_t servo_angles[NUM_SERVOS][2];
#endif
//
// DELTA / [XYZ]_DUAL_ENDSTOPS
//
@ -532,6 +543,10 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(storage_slot);
#endif // AUTO_BED_LEVELING_UBL
#if HAS_SERVOS
EEPROM_WRITE(servo_angles);
#endif
// 11 floats for DELTA / [XYZ]_DUAL_ENDSTOPS
#if ENABLED(DELTA)
@ -1135,6 +1150,14 @@ void MarlinSettings::postprocess() {
EEPROM_READ(dummyui8);
#endif // AUTO_BED_LEVELING_UBL
//
// SERVO_ANGLES
//
#if HAS_SERVOS
EEPROM_READ(servo_angles);
#endif
//
// DELTA Geometry or Dual Endstops offsets
//
@ -1774,6 +1797,37 @@ void MarlinSettings::reset(PORTARG_SOLO) {
zprobe_zoffset = Z_PROBE_OFFSET_FROM_EXTRUDER;
#endif
//
// Servo Angles
//
#if HAS_SERVOS
#if ENABLED(SWITCHING_EXTRUDER)
#if EXTRUDERS > 3
#define REQ_ANGLES 4
#else
#define REQ_ANGLES 2
#endif
const uint8_t extruder_angles[2] = SWITCHING_EXTRUDER_SERVO_ANGLES;
static_assert(COUNT(extruder_angles) == REQ_ANGLES, "SWITCHING_EXTRUDER_SERVO_ANGLES needs " STRINGIFY(REQ_ANGLES) " angles.");
servo_angles[SWITCHING_EXTRUDER_SERVO_NR][0] = extruder_angles[0];
servo_angles[SWITCHING_EXTRUDER_SERVO_NR][1] = extruder_angles[1];
#endif
#if ENABLED(SWITCHING_NOZZLE)
const uint8_t nozzel_angles[2] = SWITCHING_NOZZLE_SERVO_ANGLES;
servo_angles[SWITCHING_NOZZLE_SERVO_NR][0] = nozzel_angles[0];
servo_angles[SWITCHING_NOZZLE_SERVO_NR][1] = nozzel_angles[1];
#endif
#if defined(Z_SERVO_ANGLES) && defined(Z_PROBE_SERVO_NR)
const uint8_t z_probe_angles[2] = Z_SERVO_ANGLES;
servo_angles[Z_PROBE_SERVO_NR][0] = z_probe_angles[0];
servo_angles[Z_PROBE_SERVO_NR][1] = z_probe_angles[1];
#endif
#endif
#if ENABLED(DELTA)
const float adj[ABC] = DELTA_ENDSTOP_ADJ,
dta[ABC] = DELTA_TOWER_ANGLE_TRIM;
@ -2252,6 +2306,20 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#endif // HAS_LEVELING
#if HAS_SERVOS
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM_P(port, "Servo Angles:");
}
for (uint8_t i = 0; i < NUM_SERVOS; i++) {
CONFIG_ECHO_START;
SERIAL_ECHOPAIR_P(port, " M281 P", i);
SERIAL_ECHOPAIR_P(port, " L",servo_angles[i][0]);
SERIAL_ECHOPAIR_P(port, " U",servo_angles[i][1]);
SERIAL_EOL_P(port);
}
#endif
#if ENABLED(DELTA)
if (!forReplay) {

3
Marlin/src/module/probe.cpp
View file

@ -54,7 +54,6 @@ float zprobe_zoffset; // Initialized by settings.load()
#if HAS_Z_SERVO_PROBE
#include "../module/servo.h"
const int z_servo_angle[2] = Z_SERVO_ANGLES;
#endif
#if ENABLED(Z_PROBE_SLED)
@ -435,7 +434,7 @@ bool set_probe_deployed(const bool deploy) {
#elif HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH)
MOVE_SERVO(Z_PROBE_SERVO_NR, z_servo_angle[deploy ? 0 : 1]);
MOVE_SERVO(Z_PROBE_SERVO_NR, servo_angles[Z_PROBE_SERVO_NR][(deploy ? 0 : 1)]);
#elif ENABLED(Z_PROBE_ALLEN_KEY)

1
Marlin/src/module/probe.h
View file

@ -53,7 +53,6 @@
#endif
#if HAS_Z_SERVO_PROBE
extern const int z_servo_angle[2];
void servo_probe_init();
#endif

1
Marlin/src/module/servo.cpp
View file

@ -31,6 +31,7 @@
#include "servo.h"
HAL_SERVO_LIB servo[NUM_SERVOS];
uint8_t servo_angles[NUM_SERVOS][2];
void servo_init() {
#if NUM_SERVOS >= 1 && HAS_SERVO_0

5
Marlin/src/module/servo.h
View file

@ -30,6 +30,7 @@
#include "../HAL/shared/servo.h"
extern HAL_SERVO_LIB servo[NUM_SERVOS];
extern uint8_t servo_angles[NUM_SERVOS][2];
extern void servo_init();
#define MOVE_SERVO(I, P) servo[I].move(P)
@ -37,8 +38,8 @@ extern void servo_init();
#include "../inc/MarlinConfig.h"
#if HAS_Z_SERVO_PROBE
#define DEPLOY_Z_SERVO() MOVE_SERVO(Z_PROBE_SERVO_NR, z_servo_angle[0])
#define STOW_Z_SERVO() MOVE_SERVO(Z_PROBE_SERVO_NR, z_servo_angle[1])
#define DEPLOY_Z_SERVO() MOVE_SERVO(Z_PROBE_SERVO_NR, servo_angles[Z_PROBE_SERVO_NR][0])
#define STOW_Z_SERVO() MOVE_SERVO(Z_PROBE_SERVO_NR, servo_angles[Z_PROBE_SERVO_NR][1])
#endif
#endif // _SERVO_H_

9
Marlin/src/module/tool_change.cpp
View file

@ -60,22 +60,18 @@
#if DO_SWITCH_EXTRUDER
#if EXTRUDERS > 3
#define REQ_ANGLES 4
#define _SERVO_NR (e < 2 ? SWITCHING_EXTRUDER_SERVO_NR : SWITCHING_EXTRUDER_E23_SERVO_NR)
#else
#define REQ_ANGLES 2
#define _SERVO_NR SWITCHING_EXTRUDER_SERVO_NR
#endif
void move_extruder_servo(const uint8_t e) {
constexpr int16_t angles[] = SWITCHING_EXTRUDER_SERVO_ANGLES;
static_assert(COUNT(angles) == REQ_ANGLES, "SWITCHING_EXTRUDER_SERVO_ANGLES needs " STRINGIFY(REQ_ANGLES) " angles.");
planner.synchronize();
#if EXTRUDERS & 1
if (e < EXTRUDERS - 1)
#endif
{
MOVE_SERVO(_SERVO_NR, angles[e]);
MOVE_SERVO(_SERVO_NR, servo_angles[_SERVO_NR][e]);
safe_delay(500);
}
}
@ -85,9 +81,8 @@
#if ENABLED(SWITCHING_NOZZLE)
void move_nozzle_servo(const uint8_t e) {
const int16_t angles[2] = SWITCHING_NOZZLE_SERVO_ANGLES;
planner.synchronize();
MOVE_SERVO(SWITCHING_NOZZLE_SERVO_NR, angles[e]);
MOVE_SERVO(SWITCHING_NOZZLE_SERVO_NR, servo_angles[SWITCHING_EXTRUDER_SERVO_NR][e]);
safe_delay(500);
}