Revisited German translation
This commit is contained in:
Torsten Kurbad
parent
5897b58a70
commit
aae2f502e0
|
|
@ -35,37 +35,37 @@
|
|||
//#define SIMULATE_ROMFONT
|
||||
#define DISPLAY_CHARSET_ISO10646_1
|
||||
|
||||
#define WELCOME_MSG MACHINE_NAME " bereit."
|
||||
#define MSG_SD_INSERTED "SDKarte erkannt."
|
||||
#define MSG_SD_REMOVED "SDKarte entfernt."
|
||||
#define WELCOME_MSG MACHINE_NAME " bereit"
|
||||
#define MSG_SD_INSERTED "SD-Karte erkannt"
|
||||
#define MSG_SD_REMOVED "SD-Karte entfernt"
|
||||
#define MSG_MAIN "Hauptmenü"
|
||||
#define MSG_AUTOSTART "Autostart"
|
||||
#define MSG_DISABLE_STEPPERS "Motoren Aus" // M84
|
||||
#define MSG_DISABLE_STEPPERS "Motoren aus" // M84
|
||||
#define MSG_AUTO_HOME "Home" // G28
|
||||
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
||||
#define MSG_LEVEL_BED_WAITING "Klick für Start"
|
||||
#define MSG_LEVEL_BED_DONE "Fertig"
|
||||
#define MSG_LEVEL_BED_CANCEL "Abbruch"
|
||||
#define MSG_SET_HOME_OFFSETS "Setze Home hier"
|
||||
#define MSG_SET_HOME_OFFSETS "Setze Homeoffsets"
|
||||
#define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv"
|
||||
#define MSG_SET_ORIGIN "Setze Null hier" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
|
||||
#define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
|
||||
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
|
||||
#define MSG_PREHEAT_PLA_N "Vorwärmen PLA "
|
||||
#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Vorw. PLA Einst."
|
||||
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
|
||||
#define MSG_PREHEAT_ABS_N "Vorwärmen ABS "
|
||||
#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Vorw. ABS Einst."
|
||||
#define MSG_COOLDOWN "Abkühlen"
|
||||
#define MSG_SWITCH_PS_ON "Netzteil Ein"
|
||||
#define MSG_SWITCH_PS_OFF "Netzteil Aus"
|
||||
#define MSG_SWITCH_PS_ON "Netzteil ein"
|
||||
#define MSG_SWITCH_PS_OFF "Netzteil aus"
|
||||
#define MSG_EXTRUDE "Extrudieren"
|
||||
#define MSG_RETRACT "Retract"
|
||||
#define MSG_MOVE_AXIS "Bewegen"
|
||||
#define MSG_LEVEL_BED "Bett Korrektur"
|
||||
#define MSG_LEVEL_BED "Bett nivellieren"
|
||||
#define MSG_MOVE_X "X"
|
||||
#define MSG_MOVE_Y "Y"
|
||||
#define MSG_MOVE_Z "Z"
|
||||
|
|
@ -77,11 +77,11 @@
|
|||
#define MSG_BED_Z "Bett Z"
|
||||
#define MSG_NOZZLE "Düse"
|
||||
#define MSG_BED "Bett"
|
||||
#define MSG_FAN_SPEED "Lüftergeschw."
|
||||
#define MSG_FLOW "Fluss"
|
||||
#define MSG_FAN_SPEED "Lüfter"
|
||||
#define MSG_FLOW "Durchfluss"
|
||||
#define MSG_CONTROL "Einstellungen"
|
||||
#define MSG_MIN LCD_STR_THERMOMETER " Min"
|
||||
#define MSG_MAX LCD_STR_THERMOMETER " Max"
|
||||
#define MSG_MIN LCD_STR_THERMOMETER " min"
|
||||
#define MSG_MAX LCD_STR_THERMOMETER " max"
|
||||
#define MSG_FACTOR LCD_STR_THERMOMETER " Faktor"
|
||||
#define MSG_AUTOTEMP "AutoTemp"
|
||||
#define MSG_ON "Ein"
|
||||
|
|
@ -91,73 +91,73 @@
|
|||
#define MSG_PID_D "PID D"
|
||||
#define MSG_PID_C "PID C"
|
||||
#define MSG_ACC "A"
|
||||
#define MSG_VXY_JERK "V xy Ruck"
|
||||
#define MSG_VZ_JERK "V z Ruck"
|
||||
#define MSG_VE_JERK "V e Ruck"
|
||||
#define MSG_VXY_JERK "V XY Jerk"
|
||||
#define MSG_VZ_JERK "V Z Jerk"
|
||||
#define MSG_VE_JERK "V E Jerk"
|
||||
#define MSG_VMAX "V max " // space by purpose
|
||||
#define MSG_X "X"
|
||||
#define MSG_Y "Y"
|
||||
#define MSG_Z "Z"
|
||||
#define MSG_E "E"
|
||||
#define MSG_VMIN "V min"
|
||||
#define MSG_VTRAV_MIN "VTrav min"
|
||||
#define MSG_VTRAV_MIN "V min Leerfahrt"
|
||||
#define MSG_AMAX "A max " // space by purpose
|
||||
#define MSG_A_RETRACT "A Rückzug"
|
||||
#define MSG_A_TRAVEL "A Reise"
|
||||
#define MSG_XSTEPS "X steps/mm"
|
||||
#define MSG_YSTEPS "Y steps/mm"
|
||||
#define MSG_ZSTEPS "Z steps/mm"
|
||||
#define MSG_ESTEPS "E steps/mm"
|
||||
#define MSG_A_RETRACT "A Retract"
|
||||
#define MSG_A_TRAVEL "A Leerfahrt"
|
||||
#define MSG_XSTEPS "X Steps/mm"
|
||||
#define MSG_YSTEPS "Y Steps/mm"
|
||||
#define MSG_ZSTEPS "Z Steps/mm"
|
||||
#define MSG_ESTEPS "E Steps/mm"
|
||||
#define MSG_TEMPERATURE "Temperatur"
|
||||
#define MSG_MOTION "Bewegung"
|
||||
#define MSG_VOLUMETRIC "Filament"
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
|
||||
#define MSG_FILAMENT_DIAM "Filament D"
|
||||
#define MSG_FILAMENT_DIAM "D Fil."
|
||||
#define MSG_CONTRAST "LCD Kontrast"
|
||||
#define MSG_STORE_EPROM "EPROM speichern"
|
||||
#define MSG_LOAD_EPROM "EPROM laden"
|
||||
#define MSG_RESTORE_FAILSAFE "Standardkonfig."
|
||||
#define MSG_RESTORE_FAILSAFE "Standardkonfiguration"
|
||||
#define MSG_REFRESH "Aktualisieren"
|
||||
#define MSG_WATCH "Info"
|
||||
#define MSG_PREPARE "Vorbereitung"
|
||||
#define MSG_TUNE "Justierung"
|
||||
#define MSG_PAUSE_PRINT "SD-Druck Pause"
|
||||
#define MSG_RESUME_PRINT "SD-Druck Weiter"
|
||||
#define MSG_RESUME_PRINT "SD-Druck Fortsetzung"
|
||||
#define MSG_STOP_PRINT "SD-Druck Abbruch"
|
||||
#define MSG_CARD_MENU "SDKarte"
|
||||
#define MSG_NO_CARD "Keine SDKarte"
|
||||
#define MSG_CARD_MENU "SD-Karte"
|
||||
#define MSG_NO_CARD "Keine SD-Karte"
|
||||
#define MSG_DWELL "Warten..."
|
||||
#define MSG_USERWAIT "Warte auf Nutzer."
|
||||
#define MSG_RESUMING "Druck geht weiter"
|
||||
#define MSG_USERWAIT "Warte auf Nutzer"
|
||||
#define MSG_RESUMING "Druckfortsetzung"
|
||||
#define MSG_PRINT_ABORTED "Druck abgebrochen"
|
||||
#define MSG_NO_MOVE "Motoren Eingesch."
|
||||
#define MSG_KILLED "BEENDET."
|
||||
#define MSG_STOPPED "ANGEHALTEN."
|
||||
#define MSG_NO_MOVE "Motoren eingeschaltet"
|
||||
#define MSG_KILLED "KILLED"
|
||||
#define MSG_STOPPED "ANGEHALTEN"
|
||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Z-Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_AUTORETRACT "AutoRetract"
|
||||
#define MSG_FILAMENTCHANGE "Filament wechseln"
|
||||
#define MSG_INIT_SDCARD "SDKarte erkennen"// Manually initialize the SD-card via user interface
|
||||
#define MSG_CNG_SDCARD "SDKarte erkennen"// SD-card changed by user. For machines with no autocarddetect. Both send "M21"
|
||||
#define MSG_INIT_SDCARD "SD-Karte erkennen" // Manually initialize the SD-card via user interface
|
||||
#define MSG_CNG_SDCARD "SD-Karte getauscht" // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
|
||||
#define MSG_ZPROBE_OUT "Sensor ausserhalb"
|
||||
#define MSG_YX_UNHOMED "X/Y vor Z homen."
|
||||
#define MSG_YX_UNHOMED "X/Y vor Z homen!"
|
||||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||||
#define MSG_BABYSTEP_X "Babystep X"
|
||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT "Endstop Abbr. Ein"
|
||||
#define MSG_HEATING_FAILED_LCD "Heizen fehlgesch."
|
||||
#define MSG_ERR_REDUNDANT_TEMP "Redund. Temperaturabw."
|
||||
#define MSG_THERMAL_RUNAWAY "Temp. n. erreicht"
|
||||
#define MSG_ERR_MAXTEMP "Temp. überschritten"
|
||||
#define MSG_ERR_MINTEMP "Temp. unterschritten"
|
||||
#define MSG_ERR_MAXTEMP_BED "Temp. Bett überschr."
|
||||
#define MSG_ERR_MINTEMP_BED "Temp. Bett unterschr."
|
||||
#define MSG_ENDSTOP_ABORT "Endstop-Abbr. ein"
|
||||
#define MSG_HEATING_FAILED_LCD "HEIZEN FEHLGESCHLAGEN"
|
||||
#define MSG_ERR_REDUNDANT_TEMP "REDUND. TEMPERATURABWEICHUNG"
|
||||
#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER " NICHT ERREICHT"
|
||||
#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER " ÜBERSCHRITTEN"
|
||||
#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER " UNTERSCHRITTEN"
|
||||
#define MSG_ERR_MAXTEMP_BED "BETT " LCD_STR_THERMOMETER " ÜBERSCHRITTEN"
|
||||
#define MSG_ERR_MINTEMP_BED "BETT " LCD_STR_THERMOMETER " UNTERSCHRITTEN"
|
||||
#define MSG_END_HOUR "Stunden"
|
||||
#define MSG_END_MINUTE "Minuten"
|
||||
#define MSG_HEATING "Aufheizen..."
|
||||
|
|
|
|||
Loading…
Reference in a new issue