New HardwareTimer for STM32 5.7.0 (#15655)
This commit is contained in:
Lino Barreca
Scott Lahteine
parent
4762dfe797
commit
ac71cdc265
19
.travis.yml
19
.travis.yml
|
|
@ -25,23 +25,27 @@ env:
|
|||
- TEST_PLATFORM="sanguino_atmega1284p"
|
||||
- TEST_PLATFORM="sanguino_atmega644p"
|
||||
|
||||
# Broken Extended STM32 Environments
|
||||
#- TEST_PLATFORM="ARMED"
|
||||
#- TEST_PLATFORM="BIGTREE_BTT002"
|
||||
#- TEST_PLATFORM="BIGTREE_SKR_PRO"
|
||||
|
||||
# Extended STM32 Environments
|
||||
- TEST_PLATFORM="STM32F103RC_bigtree"
|
||||
- TEST_PLATFORM="STM32F103RC_bigtree_USB"
|
||||
- TEST_PLATFORM="STM32F103RC_fysetc"
|
||||
- TEST_PLATFORM="jgaurora_a5s_a1"
|
||||
- TEST_PLATFORM="STM32F103VE_longer"
|
||||
- TEST_PLATFORM="STM32F407VE_black"
|
||||
- TEST_PLATFORM="BIGTREE_SKR_PRO"
|
||||
- TEST_PLATFORM="mks_robin"
|
||||
- TEST_PLATFORM="ARMED"
|
||||
|
||||
# STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working.
|
||||
#- TEST_PLATFORM="STM32F4"
|
||||
#- TEST_PLATFORM="STM32F7"
|
||||
|
||||
# Put lengthy tests last
|
||||
- TEST_PLATFORM="LPC1768"
|
||||
- TEST_PLATFORM="LPC1769"
|
||||
|
||||
# Non-working environment tests
|
||||
#- TEST_PLATFORM="BIGTREE_BTT002" this board isn't released yet. we need pinout to be sure about what we do
|
||||
#- TEST_PLATFORM="at90usb1286_cdc"
|
||||
#- TEST_PLATFORM="at90usb1286_dfu"
|
||||
#- TEST_PLATFORM="STM32F103CB_malyan"
|
||||
|
|
@ -49,11 +53,6 @@ env:
|
|||
#- TEST_PLATFORM="mks_robin_mini"
|
||||
#- TEST_PLATFORM="mks_robin_nano"
|
||||
#- TEST_PLATFORM="SAMD51_grandcentral_m4"
|
||||
#- TEST_PLATFORM="STM32F103RC_bigtree"
|
||||
#- TEST_PLATFORM="STM32F103RC_bigtree_USB"
|
||||
#- TEST_PLATFORM="STM32F103RC_fysetc"
|
||||
#- TEST_PLATFORM="STM32F4"
|
||||
#- TEST_PLATFORM="STM32F7"
|
||||
|
||||
before_install:
|
||||
#
|
||||
|
|
|
|||
|
|
@ -51,8 +51,8 @@ typedef uint64_t hal_timer_t;
|
|||
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs // wrong would be 0.25
|
||||
#else
|
||||
#define STEPPER_TIMER_PRESCALE 40
|
||||
#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // frequency of stepper timer, 2MHz
|
||||
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
|
||||
#define STEPPER_TIMER_RATE ((HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE)) // frequency of stepper timer, 2MHz
|
||||
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
|
||||
#endif
|
||||
|
||||
#define STEP_TIMER_MIN_INTERVAL 8 // minimum time in µs between stepper interrupts
|
||||
|
|
|
|||
|
|
@ -99,7 +99,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
|
|||
SYNC(tc->COUNT32.SYNCBUSY.bit.CTRLB);
|
||||
|
||||
// Set compare value
|
||||
tc->COUNT32.COUNT.reg = tc->COUNT32.CC[0].reg = HAL_TIMER_RATE / frequency;
|
||||
tc->COUNT32.COUNT.reg = tc->COUNT32.CC[0].reg = (HAL_TIMER_RATE) / frequency;
|
||||
|
||||
// And start timer
|
||||
tc->COUNT32.CTRLA.bit.ENABLE = true;
|
||||
|
|
|
|||
|
|
@ -28,6 +28,16 @@
|
|||
#include "../../inc/MarlinConfig.h"
|
||||
#include "../shared/Delay.h"
|
||||
|
||||
#if (__cplusplus == 201703L) && defined(__has_include)
|
||||
#define HAS_SWSERIAL __has_include(<SoftwareSerial.h>)
|
||||
#else
|
||||
#define HAS_SWSERIAL HAS_TMC220x
|
||||
#endif
|
||||
|
||||
#if HAS_SWSERIAL
|
||||
#include "SoftwareSerial.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(SRAM_EEPROM_EMULATION)
|
||||
#if STM32F7xx
|
||||
#include "stm32f7xx_ll_pwr.h"
|
||||
|
|
@ -82,6 +92,10 @@ void HAL_init() {
|
|||
// Wait until backup regulator is initialized
|
||||
while (!LL_PWR_IsActiveFlag_BRR());
|
||||
#endif // EEPROM_EMULATED_SRAM
|
||||
|
||||
#if HAS_SWSERIAL
|
||||
SoftwareSerial::setInterruptPriority(SWSERIAL_TIMER_IRQ_PRIO, 0);
|
||||
#endif
|
||||
}
|
||||
|
||||
void HAL_clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); }
|
||||
|
|
|
|||
391
Marlin/src/HAL/HAL_STM32/SoftwareSerial.cpp
Normal file
391
Marlin/src/HAL/HAL_STM32/SoftwareSerial.cpp
Normal file
|
|
@ -0,0 +1,391 @@
|
|||
/*
|
||||
* SoftwareSerial.cpp (formerly NewSoftSerial.cpp)
|
||||
*
|
||||
* Multi-instance software serial library for Arduino/Wiring
|
||||
* -- Interrupt-driven receive and other improvements by ladyada
|
||||
* (http://ladyada.net)
|
||||
* -- Tuning, circular buffer, derivation from class Print/Stream,
|
||||
* multi-instance support, porting to 8MHz processors,
|
||||
* various optimizations, PROGMEM delay tables, inverse logic and
|
||||
* direct port writing by Mikal Hart (http://www.arduiniana.org)
|
||||
* -- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
|
||||
* -- 20MHz processor support by Garrett Mace (http://www.macetech.com)
|
||||
* -- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
|
||||
* -- STM32 support by Armin van der Togt
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* The latest version of this library can always be found at
|
||||
* http://arduiniana.org.
|
||||
*/
|
||||
|
||||
//
|
||||
// Includes
|
||||
//
|
||||
#include "SoftwareSerial.h"
|
||||
#include <timer.h>
|
||||
|
||||
#define OVERSAMPLE 3 // in RX, Timer will generate interruption OVERSAMPLE time during a bit. Thus OVERSAMPLE ticks in a bit. (interrupt not synchonized with edge).
|
||||
|
||||
// defined in bit-periods
|
||||
#define HALFDUPLEX_SWITCH_DELAY 5
|
||||
// It's best to define TIMER_SERIAL in variant.h. If not defined, we choose one here
|
||||
// The order is based on (lack of) features and compare channels, we choose the simplest available
|
||||
// because we only need an update interrupt
|
||||
#if !defined(TIMER_SERIAL)
|
||||
#if defined (TIM18_BASE)
|
||||
#define TIMER_SERIAL TIM18
|
||||
#elif defined (TIM7_BASE)
|
||||
#define TIMER_SERIAL TIM7
|
||||
#elif defined (TIM6_BASE)
|
||||
#define TIMER_SERIAL TIM6
|
||||
#elif defined (TIM22_BASE)
|
||||
#define TIMER_SERIAL TIM22
|
||||
#elif defined (TIM21_BASE)
|
||||
#define TIMER_SERIAL TIM21
|
||||
#elif defined (TIM17_BASE)
|
||||
#define TIMER_SERIAL TIM17
|
||||
#elif defined (TIM16_BASE)
|
||||
#define TIMER_SERIAL TIM16
|
||||
#elif defined (TIM15_BASE)
|
||||
#define TIMER_SERIAL TIM15
|
||||
#elif defined (TIM14_BASE)
|
||||
#define TIMER_SERIAL TIM14
|
||||
#elif defined (TIM13_BASE)
|
||||
#define TIMER_SERIAL TIM13
|
||||
#elif defined (TIM11_BASE)
|
||||
#define TIMER_SERIAL TIM11
|
||||
#elif defined (TIM10_BASE)
|
||||
#define TIMER_SERIAL TIM10
|
||||
#elif defined (TIM12_BASE)
|
||||
#define TIMER_SERIAL TIM12
|
||||
#elif defined (TIM19_BASE)
|
||||
#define TIMER_SERIAL TIM19
|
||||
#elif defined (TIM9_BASE)
|
||||
#define TIMER_SERIAL TIM9
|
||||
#elif defined (TIM5_BASE)
|
||||
#define TIMER_SERIAL TIM5
|
||||
#elif defined (TIM4_BASE)
|
||||
#define TIMER_SERIAL TIM4
|
||||
#elif defined (TIM3_BASE)
|
||||
#define TIMER_SERIAL TIM3
|
||||
#elif defined (TIM2_BASE)
|
||||
#define TIMER_SERIAL TIM2
|
||||
#elif defined (TIM20_BASE)
|
||||
#define TIMER_SERIAL TIM20
|
||||
#elif defined (TIM8_BASE)
|
||||
#define TIMER_SERIAL TIM8
|
||||
#elif defined (TIM1_BASE)
|
||||
#define TIMER_SERIAL TIM1
|
||||
#else
|
||||
#error No suitable timer found for SoftwareSerial, define TIMER_SERIAL in variant.h
|
||||
#endif
|
||||
#endif
|
||||
//
|
||||
// Statics
|
||||
//
|
||||
HardwareTimer SoftwareSerial::timer(TIMER_SERIAL);
|
||||
const IRQn_Type SoftwareSerial::timer_interrupt_number = static_cast<IRQn_Type>(getTimerUpIrq(TIMER_SERIAL));
|
||||
uint32_t SoftwareSerial::timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), TIM_IRQ_PRIO, TIM_IRQ_SUBPRIO);
|
||||
SoftwareSerial *SoftwareSerial::active_listener = nullptr;
|
||||
SoftwareSerial *volatile SoftwareSerial::active_out = nullptr;
|
||||
SoftwareSerial *volatile SoftwareSerial::active_in = nullptr;
|
||||
int32_t SoftwareSerial::tx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit
|
||||
int32_t volatile SoftwareSerial::rx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit
|
||||
uint32_t SoftwareSerial::tx_buffer = 0;
|
||||
int32_t SoftwareSerial::tx_bit_cnt = 0;
|
||||
uint32_t SoftwareSerial::rx_buffer = 0;
|
||||
int32_t SoftwareSerial::rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
|
||||
uint32_t SoftwareSerial::cur_speed = 0;
|
||||
|
||||
void SoftwareSerial::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority) {
|
||||
timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preemptPriority, subPriority);
|
||||
}
|
||||
|
||||
//
|
||||
// Private methods
|
||||
//
|
||||
|
||||
void SoftwareSerial::setSpeed(uint32_t speed) {
|
||||
if (speed != cur_speed) {
|
||||
timer.pause();
|
||||
if (speed != 0) {
|
||||
// Disable the timer
|
||||
uint32_t clock_rate, cmp_value;
|
||||
// Get timer clock
|
||||
clock_rate = timer.getTimerClkFreq();
|
||||
int pre = 1;
|
||||
// Calculate prescale an compare value
|
||||
do {
|
||||
cmp_value = clock_rate / (speed * OVERSAMPLE);
|
||||
if (cmp_value >= UINT16_MAX) {
|
||||
clock_rate /= 2;
|
||||
pre *= 2;
|
||||
}
|
||||
} while (cmp_value >= UINT16_MAX);
|
||||
timer.setPrescaleFactor(pre);
|
||||
timer.setOverflow(cmp_value);
|
||||
timer.setCount(0);
|
||||
timer.attachInterrupt(&handleInterrupt);
|
||||
timer.resume();
|
||||
NVIC_SetPriority(timer_interrupt_number, timer_interrupt_priority);
|
||||
}
|
||||
else
|
||||
timer.detachInterrupt();
|
||||
cur_speed = speed;
|
||||
}
|
||||
}
|
||||
|
||||
// This function sets the current object as the "listening"
|
||||
// one and returns true if it replaces another
|
||||
bool SoftwareSerial::listen() {
|
||||
if (active_listener != this) {
|
||||
// wait for any transmit to complete as we may change speed
|
||||
while (active_out);
|
||||
active_listener->stopListening();
|
||||
rx_tick_cnt = 1; // 1 : next interrupt will decrease rx_tick_cnt to 0 which means RX pin level will be considered.
|
||||
rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
|
||||
setSpeed(_speed);
|
||||
active_listener = this;
|
||||
if (!_half_duplex) active_in = this;
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
// Stop listening. Returns true if we were actually listening.
|
||||
bool SoftwareSerial::stopListening() {
|
||||
if (active_listener == this) {
|
||||
// wait for any output to complete
|
||||
while (active_out);
|
||||
if (_half_duplex) setRXTX(false);
|
||||
active_listener = nullptr;
|
||||
active_in = nullptr;
|
||||
// turn off ints
|
||||
setSpeed(0);
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
inline void SoftwareSerial::setTX() {
|
||||
if (_inverse_logic)
|
||||
LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber);
|
||||
else
|
||||
LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber);
|
||||
pinMode(_transmitPin, OUTPUT);
|
||||
}
|
||||
|
||||
inline void SoftwareSerial::setRX() {
|
||||
pinMode(_receivePin, _inverse_logic ? INPUT_PULLDOWN : INPUT_PULLUP); // pullup for normal logic!
|
||||
}
|
||||
|
||||
inline void SoftwareSerial::setRXTX(bool input) {
|
||||
if (_half_duplex) {
|
||||
if (input) {
|
||||
if (active_in != this) {
|
||||
setRX();
|
||||
rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
|
||||
rx_tick_cnt = 2; // 2 : next interrupt will be discarded. 2 interrupts required to consider RX pin level
|
||||
active_in = this;
|
||||
}
|
||||
}
|
||||
else {
|
||||
if (active_in == this) {
|
||||
setTX();
|
||||
active_in = nullptr;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
inline void SoftwareSerial::send() {
|
||||
if (--tx_tick_cnt <= 0) { // if tx_tick_cnt > 0 interrupt is discarded. Only when tx_tick_cnt reaches 0 is TX pin set.
|
||||
if (tx_bit_cnt++ < 10) { // tx_bit_cnt < 10 transmission is not finished (10 = 1 start +8 bits + 1 stop)
|
||||
// Send data (including start and stop bits)
|
||||
if (tx_buffer & 1)
|
||||
LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber);
|
||||
else
|
||||
LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber);
|
||||
tx_buffer >>= 1;
|
||||
tx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks to send next bit
|
||||
}
|
||||
else { // Transmission finished
|
||||
tx_tick_cnt = 1;
|
||||
if (_output_pending) {
|
||||
active_out = nullptr;
|
||||
|
||||
// In half-duplex mode wait HALFDUPLEX_SWITCH_DELAY bit-periods after the byte has
|
||||
// been transmitted before allowing the switch to RX mode
|
||||
}
|
||||
else if (tx_bit_cnt > 10 + OVERSAMPLE * HALFDUPLEX_SWITCH_DELAY) {
|
||||
if (_half_duplex && active_listener == this) setRXTX(true);
|
||||
active_out = nullptr;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//
|
||||
// The receive routine called by the interrupt handler
|
||||
//
|
||||
inline void SoftwareSerial::recv() {
|
||||
if (--rx_tick_cnt <= 0) { // if rx_tick_cnt > 0 interrupt is discarded. Only when rx_tick_cnt reaches 0 is RX pin considered
|
||||
bool inbit = LL_GPIO_IsInputPinSet(_receivePinPort, _receivePinNumber) ^ _inverse_logic;
|
||||
if (rx_bit_cnt == -1) { // rx_bit_cnt = -1 : waiting for start bit
|
||||
if (!inbit) {
|
||||
// got start bit
|
||||
rx_bit_cnt = 0; // rx_bit_cnt == 0 : start bit received
|
||||
rx_tick_cnt = OVERSAMPLE + 1; // Wait 1 bit (OVERSAMPLE ticks) + 1 tick in order to sample RX pin in the middle of the edge (and not too close to the edge)
|
||||
rx_buffer = 0;
|
||||
}
|
||||
else
|
||||
rx_tick_cnt = 1; // Waiting for start bit, but wrong level. Wait for next Interrupt to check RX pin level
|
||||
}
|
||||
else if (rx_bit_cnt >= 8) { // rx_bit_cnt >= 8 : waiting for stop bit
|
||||
if (inbit) {
|
||||
// Stop-bit read complete. Add to buffer.
|
||||
uint8_t next = (_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF;
|
||||
if (next != _receive_buffer_head) {
|
||||
// save new data in buffer: tail points to byte destination
|
||||
_receive_buffer[_receive_buffer_tail] = rx_buffer; // save new byte
|
||||
_receive_buffer_tail = next;
|
||||
}
|
||||
else // rx_bit_cnt = x with x = [0..7] correspond to new bit x received
|
||||
_buffer_overflow = true;
|
||||
}
|
||||
// Full trame received. Restart waiting for start bit at next interrupt
|
||||
rx_tick_cnt = 1;
|
||||
rx_bit_cnt = -1;
|
||||
}
|
||||
else {
|
||||
// data bits
|
||||
rx_buffer >>= 1;
|
||||
if (inbit) rx_buffer |= 0x80;
|
||||
rx_bit_cnt++; // Prepare for next bit
|
||||
rx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks before sampling next bit
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//
|
||||
// Interrupt handling
|
||||
//
|
||||
|
||||
/* static */
|
||||
inline void SoftwareSerial::handleInterrupt(HardwareTimer*) {
|
||||
if (active_in) active_in->recv();
|
||||
if (active_out) active_out->send();
|
||||
}
|
||||
|
||||
//
|
||||
// Constructor
|
||||
//
|
||||
SoftwareSerial::SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic /* = false */) :
|
||||
_receivePin(receivePin),
|
||||
_transmitPin(transmitPin),
|
||||
_receivePinPort(digitalPinToPort(receivePin)),
|
||||
_receivePinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(receivePin))),
|
||||
_transmitPinPort(digitalPinToPort(transmitPin)),
|
||||
_transmitPinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(transmitPin))),
|
||||
_speed(0),
|
||||
_buffer_overflow(false),
|
||||
_inverse_logic(inverse_logic),
|
||||
_half_duplex(receivePin == transmitPin),
|
||||
_output_pending(0),
|
||||
_receive_buffer_tail(0),
|
||||
_receive_buffer_head(0)
|
||||
{
|
||||
if ((receivePin < NUM_DIGITAL_PINS) || (transmitPin < NUM_DIGITAL_PINS)) {
|
||||
/* Enable GPIO clock for tx and rx pin*/
|
||||
set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(transmitPin)));
|
||||
set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(receivePin)));
|
||||
}
|
||||
else
|
||||
_Error_Handler("ERROR: invalid pin number\n", -1);
|
||||
}
|
||||
|
||||
//
|
||||
// Destructor
|
||||
//
|
||||
SoftwareSerial::~SoftwareSerial() { end(); }
|
||||
|
||||
//
|
||||
// Public methods
|
||||
//
|
||||
|
||||
void SoftwareSerial::begin(long speed) {
|
||||
#ifdef FORCE_BAUD_RATE
|
||||
speed = FORCE_BAUD_RATE;
|
||||
#endif
|
||||
_speed = speed;
|
||||
if (!_half_duplex) {
|
||||
setTX();
|
||||
setRX();
|
||||
listen();
|
||||
}
|
||||
else
|
||||
setTX();
|
||||
}
|
||||
|
||||
void SoftwareSerial::end() {
|
||||
stopListening();
|
||||
}
|
||||
|
||||
// Read data from buffer
|
||||
int SoftwareSerial::read() {
|
||||
// Empty buffer?
|
||||
if (_receive_buffer_head == _receive_buffer_tail) return -1;
|
||||
|
||||
// Read from "head"
|
||||
uint8_t d = _receive_buffer[_receive_buffer_head]; // grab next byte
|
||||
_receive_buffer_head = (_receive_buffer_head + 1) % _SS_MAX_RX_BUFF;
|
||||
return d;
|
||||
}
|
||||
|
||||
int SoftwareSerial::available() {
|
||||
return (_receive_buffer_tail + _SS_MAX_RX_BUFF - _receive_buffer_head) % _SS_MAX_RX_BUFF;
|
||||
}
|
||||
|
||||
size_t SoftwareSerial::write(uint8_t b) {
|
||||
// wait for previous transmit to complete
|
||||
_output_pending = 1;
|
||||
while (active_out) { /* nada */ }
|
||||
// add start and stop bits.
|
||||
tx_buffer = b << 1 | 0x200;
|
||||
if (_inverse_logic) tx_buffer = ~tx_buffer;
|
||||
tx_bit_cnt = 0;
|
||||
tx_tick_cnt = OVERSAMPLE;
|
||||
setSpeed(_speed);
|
||||
if (_half_duplex) setRXTX(false);
|
||||
_output_pending = 0;
|
||||
// make us active
|
||||
active_out = this;
|
||||
return 1;
|
||||
}
|
||||
|
||||
void SoftwareSerial::flush() {
|
||||
noInterrupts();
|
||||
_receive_buffer_head = _receive_buffer_tail = 0;
|
||||
interrupts();
|
||||
}
|
||||
|
||||
int SoftwareSerial::peek() {
|
||||
// Empty buffer?
|
||||
if (_receive_buffer_head == _receive_buffer_tail) return -1;
|
||||
|
||||
// Read from "head"
|
||||
return _receive_buffer[_receive_buffer_head];
|
||||
}
|
||||
119
Marlin/src/HAL/HAL_STM32/SoftwareSerial.h
Normal file
119
Marlin/src/HAL/HAL_STM32/SoftwareSerial.h
Normal file
|
|
@ -0,0 +1,119 @@
|
|||
/**
|
||||
* SoftwareSerial.h (formerly NewSoftSerial.h)
|
||||
*
|
||||
* Multi-instance software serial library for Arduino/Wiring
|
||||
* -- Interrupt-driven receive and other improvements by ladyada
|
||||
* (http://ladyada.net)
|
||||
* -- Tuning, circular buffer, derivation from class Print/Stream,
|
||||
* multi-instance support, porting to 8MHz processors,
|
||||
* various optimizations, PROGMEM delay tables, inverse logic and
|
||||
* direct port writing by Mikal Hart (http://www.arduiniana.org)
|
||||
* -- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
|
||||
* -- 20MHz processor support by Garrett Mace (http://www.macetech.com)
|
||||
* -- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* The latest version of this library can always be found at
|
||||
* http://arduiniana.org.
|
||||
*/
|
||||
|
||||
#ifndef SOFTWARESERIAL_H
|
||||
#define SOFTWARESERIAL_H
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
/******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
#define _SS_MAX_RX_BUFF 64 // RX buffer size
|
||||
|
||||
class SoftwareSerial : public Stream {
|
||||
private:
|
||||
// per object data
|
||||
uint16_t _receivePin;
|
||||
uint16_t _transmitPin;
|
||||
GPIO_TypeDef *_receivePinPort;
|
||||
uint32_t _receivePinNumber;
|
||||
GPIO_TypeDef *_transmitPinPort;
|
||||
uint32_t _transmitPinNumber;
|
||||
uint32_t _speed;
|
||||
|
||||
uint16_t _buffer_overflow: 1;
|
||||
uint16_t _inverse_logic: 1;
|
||||
uint16_t _half_duplex: 1;
|
||||
uint16_t _output_pending: 1;
|
||||
|
||||
unsigned char _receive_buffer[_SS_MAX_RX_BUFF];
|
||||
volatile uint8_t _receive_buffer_tail;
|
||||
volatile uint8_t _receive_buffer_head;
|
||||
|
||||
uint32_t delta_start = 0;
|
||||
|
||||
// static data
|
||||
static bool initialised;
|
||||
static HardwareTimer timer;
|
||||
static const IRQn_Type timer_interrupt_number;
|
||||
static uint32_t timer_interrupt_priority;
|
||||
static SoftwareSerial *active_listener;
|
||||
static SoftwareSerial *volatile active_out;
|
||||
static SoftwareSerial *volatile active_in;
|
||||
static int32_t tx_tick_cnt;
|
||||
static volatile int32_t rx_tick_cnt;
|
||||
static uint32_t tx_buffer;
|
||||
static int32_t tx_bit_cnt;
|
||||
static uint32_t rx_buffer;
|
||||
static int32_t rx_bit_cnt;
|
||||
static uint32_t cur_speed;
|
||||
|
||||
// private methods
|
||||
void send();
|
||||
void recv();
|
||||
void setTX();
|
||||
void setRX();
|
||||
void setSpeed(uint32_t speed);
|
||||
void setRXTX(bool input);
|
||||
static void handleInterrupt(HardwareTimer *timer);
|
||||
|
||||
public:
|
||||
// public methods
|
||||
|
||||
SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic = false);
|
||||
virtual ~SoftwareSerial();
|
||||
void begin(long speed);
|
||||
bool listen();
|
||||
void end();
|
||||
bool isListening() { return active_listener == this; }
|
||||
bool stopListening();
|
||||
bool overflow() {
|
||||
bool ret = _buffer_overflow;
|
||||
if (ret) _buffer_overflow = false;
|
||||
return ret;
|
||||
}
|
||||
int peek();
|
||||
|
||||
virtual size_t write(uint8_t byte);
|
||||
virtual int read();
|
||||
virtual int available();
|
||||
virtual void flush();
|
||||
operator bool() { return true; }
|
||||
|
||||
static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority);
|
||||
|
||||
using Print::write;
|
||||
};
|
||||
|
||||
#endif // SOFTWARESERIAL_H
|
||||
|
|
@ -32,62 +32,108 @@
|
|||
|
||||
#define NUM_HARDWARE_TIMERS 2
|
||||
|
||||
#define __TIMER_DEV(X) TIM##X
|
||||
#define _TIMER_DEV(X) __TIMER_DEV(X)
|
||||
#define STEP_TIMER_DEV _TIMER_DEV(STEP_TIMER)
|
||||
#define TEMP_TIMER_DEV _TIMER_DEV(TEMP_TIMER)
|
||||
|
||||
// ------------------------
|
||||
// Private Variables
|
||||
// ------------------------
|
||||
|
||||
stm32_timer_t TimerHandle[NUM_HARDWARE_TIMERS];
|
||||
HardwareTimer *timer_instance[NUM_HARDWARE_TIMERS] = { NULL };
|
||||
bool timer_enabled[NUM_HARDWARE_TIMERS] = { false };
|
||||
|
||||
// ------------------------
|
||||
// Public functions
|
||||
// ------------------------
|
||||
|
||||
bool timers_initialized[NUM_HARDWARE_TIMERS] = { false };
|
||||
|
||||
// frequency is in Hertz
|
||||
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
|
||||
if (!HAL_timer_initialized(timer_num)) {
|
||||
switch (timer_num) {
|
||||
case STEP_TIMER_NUM: // STEPPER TIMER - use a 32bit timer if possible
|
||||
timer_instance[timer_num] = new HardwareTimer(STEP_TIMER_DEV);
|
||||
/* Set the prescaler to the final desired value.
|
||||
* This will change the effective ISR callback frequency but when
|
||||
* HAL_timer_start(timer_num=0) is called in the core for the first time
|
||||
* the real frequency isn't important as long as, after boot, the ISR
|
||||
* gets called with the correct prescaler and count register. So here
|
||||
* we set the prescaler to the correct, final value and ignore the frequency
|
||||
* asked. We will call back the ISR in 1 second to start at full speed.
|
||||
*
|
||||
* The proper fix, however, would be a correct initialization OR a
|
||||
* HAL_timer_change(const uint8_t timer_num, const uint32_t frequency)
|
||||
* which changes the prescaler when an IRQ frequency change is needed
|
||||
* (for example when steppers are turned on)
|
||||
*/
|
||||
timer_instance[timer_num]->setPrescaleFactor(STEPPER_TIMER_PRESCALE); //the -1 is done internally
|
||||
timer_instance[timer_num]->setOverflow(_MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE) /* /frequency */), TICK_FORMAT);
|
||||
break;
|
||||
case TEMP_TIMER_NUM: // TEMP TIMER - any available 16bit timer
|
||||
timer_instance[timer_num] = new HardwareTimer(TEMP_TIMER_DEV);
|
||||
// The prescale factor is computed automatically for HERTZ_FORMAT
|
||||
timer_instance[timer_num]->setOverflow(frequency, HERTZ_FORMAT);
|
||||
break;
|
||||
}
|
||||
|
||||
if (!timers_initialized[timer_num]) {
|
||||
uint32_t step_prescaler = STEPPER_TIMER_PRESCALE - 1,
|
||||
temp_prescaler = TEMP_TIMER_PRESCALE - 1;
|
||||
HAL_timer_enable_interrupt(timer_num);
|
||||
|
||||
/*
|
||||
* Initializes (and unfortunately starts) the timer.
|
||||
* This is needed to set correct IRQ priority at the moment but causes
|
||||
* no harm since every call to HAL_timer_start() is actually followed by
|
||||
* a call to HAL_timer_enable_interrupt() which means that there isn't
|
||||
* a case in which you want the timer to run without a callback.
|
||||
*/
|
||||
timer_instance[timer_num]->resume(); // First call to resume() MUST follow the attachInterrupt()
|
||||
|
||||
// This is fixed in Arduino_Core_STM32 1.8.
|
||||
// These calls can be removed and replaced with
|
||||
// timer_instance[timer_num]->setInterruptPriority
|
||||
switch (timer_num) {
|
||||
case STEP_TIMER_NUM:
|
||||
// STEPPER TIMER - use a 32bit timer if possible
|
||||
TimerHandle[timer_num].timer = STEP_TIMER_DEV;
|
||||
TimerHandle[timer_num].irqHandle = Step_Handler;
|
||||
TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / step_prescaler) / frequency) - 1, step_prescaler);
|
||||
HAL_NVIC_SetPriority(STEP_TIMER_IRQ_NAME, STEP_TIMER_IRQ_PRIO, 0);
|
||||
break;
|
||||
|
||||
case TEMP_TIMER_NUM:
|
||||
// TEMP TIMER - any available 16bit Timer
|
||||
TimerHandle[timer_num].timer = TEMP_TIMER_DEV;
|
||||
TimerHandle[timer_num].irqHandle = Temp_Handler;
|
||||
TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / temp_prescaler) / frequency) - 1, temp_prescaler);
|
||||
HAL_NVIC_SetPriority(TEMP_TIMER_IRQ_NAME, TEMP_TIMER_IRQ_PRIO, 0);
|
||||
break;
|
||||
}
|
||||
timers_initialized[timer_num] = true;
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
|
||||
const IRQn_Type IRQ_Id = IRQn_Type(getTimerIrq(TimerHandle[timer_num].timer));
|
||||
HAL_NVIC_EnableIRQ(IRQ_Id);
|
||||
if (HAL_timer_initialized(timer_num) && !timer_enabled[timer_num]) {
|
||||
timer_enabled[timer_num] = true;
|
||||
switch (timer_num) {
|
||||
case STEP_TIMER_NUM:
|
||||
timer_instance[timer_num]->attachInterrupt(Step_Handler);
|
||||
break;
|
||||
case TEMP_TIMER_NUM:
|
||||
timer_instance[timer_num]->attachInterrupt(Temp_Handler);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
|
||||
const IRQn_Type IRQ_Id = IRQn_Type(getTimerIrq(TimerHandle[timer_num].timer));
|
||||
HAL_NVIC_DisableIRQ(IRQ_Id);
|
||||
|
||||
// We NEED memory barriers to ensure Interrupts are actually disabled!
|
||||
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
|
||||
__DSB();
|
||||
__ISB();
|
||||
if (HAL_timer_interrupt_enabled(timer_num)) {
|
||||
timer_instance[timer_num]->detachInterrupt();
|
||||
timer_enabled[timer_num] = false;
|
||||
}
|
||||
}
|
||||
|
||||
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
|
||||
const uint32_t IRQ_Id = getTimerIrq(TimerHandle[timer_num].timer);
|
||||
return NVIC->ISER[IRQ_Id >> 5] & _BV32(IRQ_Id & 0x1F);
|
||||
return HAL_timer_initialized(timer_num) && timer_enabled[timer_num];
|
||||
}
|
||||
|
||||
// Only for use within the HAL
|
||||
TIM_TypeDef * HAL_timer_device(const uint8_t timer_num) {
|
||||
switch (timer_num) {
|
||||
case STEP_TIMER_NUM: return STEP_TIMER_DEV;
|
||||
case TEMP_TIMER_NUM: return TEMP_TIMER_DEV;
|
||||
}
|
||||
return nullptr;
|
||||
}
|
||||
|
||||
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@
|
|||
#define hal_timer_t uint32_t
|
||||
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFF // Timers can be 16 or 32 bit
|
||||
|
||||
|
||||
#ifdef STM32F0xx
|
||||
|
||||
#define HAL_TIMER_RATE (F_CPU) // frequency of timer peripherals
|
||||
|
|
@ -66,27 +67,30 @@
|
|||
#endif
|
||||
|
||||
#ifndef TEMP_TIMER
|
||||
#define TEMP_TIMER 7
|
||||
#define TEMP_TIMER 14 // TIM7 is consumed by Software Serial if used.
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#ifndef SWSERIAL_TIMER_IRQ_PRIO
|
||||
#define SWSERIAL_TIMER_IRQ_PRIO 1
|
||||
#endif
|
||||
|
||||
#ifndef STEP_TIMER_IRQ_PRIO
|
||||
#define STEP_TIMER_IRQ_PRIO 1
|
||||
#define STEP_TIMER_IRQ_PRIO 2
|
||||
#endif
|
||||
|
||||
#ifndef TEMP_TIMER_IRQ_PRIO
|
||||
#define TEMP_TIMER_IRQ_PRIO 2
|
||||
#define TEMP_TIMER_IRQ_PRIO 14 //14 = after hardware ISRs
|
||||
#endif
|
||||
|
||||
#define STEP_TIMER_NUM 0 // index of timer to use for stepper
|
||||
#define TEMP_TIMER_NUM 1 // index of timer to use for temperature
|
||||
#define PULSE_TIMER_NUM STEP_TIMER_NUM
|
||||
|
||||
#define TEMP_TIMER_RATE 72000 // 72 Khz
|
||||
#define TEMP_TIMER_PRESCALE ((HAL_TIMER_RATE)/(TEMP_TIMER_RATE))
|
||||
#define TEMP_TIMER_FREQUENCY 1000
|
||||
#define TEMP_TIMER_FREQUENCY 1000 //Temperature::isr() is expected to be called at around 1kHz
|
||||
|
||||
//TODO: get rid of manual rate/prescale/ticks/cycles taken for procedures in stepper.cpp
|
||||
#define STEPPER_TIMER_RATE 2000000 // 2 Mhz
|
||||
#define STEPPER_TIMER_PRESCALE ((HAL_TIMER_RATE)/(STEPPER_TIMER_RATE))
|
||||
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
|
||||
|
|
@ -95,17 +99,6 @@
|
|||
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
|
||||
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
|
||||
|
||||
#define __TIMER_DEV(X) TIM##X
|
||||
#define _TIMER_DEV(X) __TIMER_DEV(X)
|
||||
#define STEP_TIMER_DEV _TIMER_DEV(STEP_TIMER)
|
||||
#define TEMP_TIMER_DEV _TIMER_DEV(TEMP_TIMER)
|
||||
|
||||
#define __TIMER_CALLBACK(X) TIM##X##_IRQHandler
|
||||
#define _TIMER_CALLBACK(X) __TIMER_CALLBACK(X)
|
||||
|
||||
#define STEP_TIMER_CALLBACK _TIMER_CALLBACK(STEP_TIMER)
|
||||
#define TEMP_TIMER_CALLBACK _TIMER_CALLBACK(TEMP_TIMER)
|
||||
|
||||
#define __TIMER_IRQ_NAME(X) TIM##X##_IRQn
|
||||
#define _TIMER_IRQ_NAME(X) __TIMER_IRQ_NAME(X)
|
||||
|
||||
|
|
@ -119,22 +112,16 @@
|
|||
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
|
||||
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
|
||||
|
||||
extern void Step_Handler(stimer_t *htim);
|
||||
extern void Temp_Handler(stimer_t *htim);
|
||||
#define HAL_STEP_TIMER_ISR() void Step_Handler(stimer_t *htim)
|
||||
#define HAL_TEMP_TIMER_ISR() void Temp_Handler(stimer_t *htim)
|
||||
|
||||
// ------------------------
|
||||
// Types
|
||||
// ------------------------
|
||||
|
||||
typedef stimer_t stm32_timer_t;
|
||||
extern void Step_Handler(HardwareTimer *htim);
|
||||
extern void Temp_Handler(HardwareTimer *htim);
|
||||
#define HAL_STEP_TIMER_ISR() void Step_Handler(HardwareTimer *htim)
|
||||
#define HAL_TEMP_TIMER_ISR() void Temp_Handler(HardwareTimer *htim)
|
||||
|
||||
// ------------------------
|
||||
// Public Variables
|
||||
// ------------------------
|
||||
|
||||
extern stm32_timer_t TimerHandle[];
|
||||
extern HardwareTimer *timer_instance[];
|
||||
|
||||
// ------------------------
|
||||
// Public functions
|
||||
|
|
@ -145,18 +132,26 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num);
|
|||
void HAL_timer_disable_interrupt(const uint8_t timer_num);
|
||||
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
|
||||
|
||||
FORCE_INLINE static uint32_t HAL_timer_get_count(const uint8_t timer_num) {
|
||||
return __HAL_TIM_GET_COUNTER(&TimerHandle[timer_num].handle);
|
||||
//TIM_TypeDef* HAL_timer_device(const uint8_t timer_num); no need to be public for now. not public = not used externally
|
||||
|
||||
// FORCE_INLINE because these are used in performance-critical situations
|
||||
FORCE_INLINE bool HAL_timer_initialized(const uint8_t timer_num) {
|
||||
return timer_instance[timer_num] != NULL;
|
||||
}
|
||||
FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
|
||||
return HAL_timer_initialized(timer_num) ? timer_instance[timer_num]->getCount() : 0;
|
||||
}
|
||||
|
||||
FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const uint32_t compare) {
|
||||
__HAL_TIM_SET_AUTORELOAD(&TimerHandle[timer_num].handle, compare);
|
||||
if (HAL_timer_get_count(timer_num) >= compare)
|
||||
TimerHandle[timer_num].handle.Instance->EGR |= TIM_EGR_UG; // Generate an immediate update interrupt
|
||||
}
|
||||
|
||||
FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
|
||||
return __HAL_TIM_GET_AUTORELOAD(&TimerHandle[timer_num].handle);
|
||||
// NOTE: Method name may be misleading.
|
||||
// STM32 has an Auto-Reload Register (ARR) as opposed to a "compare" register
|
||||
FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t overflow) {
|
||||
if (HAL_timer_initialized(timer_num)) {
|
||||
timer_instance[timer_num]->setOverflow(overflow + 1, TICK_FORMAT); // Value decremented by setOverflow()
|
||||
// wiki: "force all registers (Autoreload, prescaler, compare) to be taken into account"
|
||||
// So, if the new overflow value is less than the count it will trigger a rollover interrupt.
|
||||
if (overflow < timer_instance[timer_num]->getCount()) // Added 'if' here because reports say it won't boot without it
|
||||
timer_instance[timer_num]->refresh();
|
||||
}
|
||||
}
|
||||
|
||||
#define HAL_timer_isr_prologue(TIMER_NUM)
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
|
|||
timer_set_prescaler(STEP_TIMER_DEV, (uint16_t)(STEPPER_TIMER_PRESCALE - 1));
|
||||
timer_set_reload(STEP_TIMER_DEV, 0xFFFF);
|
||||
timer_oc_set_mode(STEP_TIMER_DEV, STEP_TIMER_CHAN, TIMER_OC_MODE_FROZEN, TIMER_OC_NO_PRELOAD); // no output pin change
|
||||
timer_set_compare(STEP_TIMER_DEV, STEP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (STEPPER_TIMER_RATE / frequency)));
|
||||
timer_set_compare(STEP_TIMER_DEV, STEP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (STEPPER_TIMER_RATE) / frequency));
|
||||
timer_no_ARR_preload_ARPE(STEP_TIMER_DEV); // Need to be sure no preload on ARR register
|
||||
timer_attach_interrupt(STEP_TIMER_DEV, STEP_TIMER_CHAN, stepTC_Handler);
|
||||
nvic_irq_set_priority(irq_num, STEP_TIMER_IRQ_PRIO);
|
||||
|
|
@ -95,7 +95,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
|
|||
timer_set_count(TEMP_TIMER_DEV, 0);
|
||||
timer_set_prescaler(TEMP_TIMER_DEV, (uint16_t)(TEMP_TIMER_PRESCALE - 1));
|
||||
timer_set_reload(TEMP_TIMER_DEV, 0xFFFF);
|
||||
timer_set_compare(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), ((F_CPU / TEMP_TIMER_PRESCALE) / frequency)));
|
||||
timer_set_compare(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (F_CPU) / (TEMP_TIMER_PRESCALE) / frequency));
|
||||
timer_attach_interrupt(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, tempTC_Handler);
|
||||
nvic_irq_set_priority(irq_num, TEMP_TIMER_IRQ_PRIO);
|
||||
timer_generate_update(TEMP_TIMER_DEV);
|
||||
|
|
|
|||
|
|
@ -24,16 +24,15 @@
|
|||
|
||||
#define CPU_32_BIT
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#include "../shared/Marduino.h"
|
||||
#include "../shared/math_32bit.h"
|
||||
#include "../shared/HAL_SPI.h"
|
||||
|
||||
#include "fastio.h"
|
||||
#include "watchdog.h"
|
||||
|
||||
#include "timers.h"
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
#include "watchdog.h"
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
|
|||
FTM0_SC = 0x00; // Set this to zero before changing the modulus
|
||||
FTM0_CNT = 0x0000; // Reset the count to zero
|
||||
FTM0_MOD = 0xFFFF; // max modulus = 65535
|
||||
FTM0_C0V = FTM0_TIMER_RATE / frequency; // Initial FTM Channel 0 compare value
|
||||
FTM0_C0V = (FTM0_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value
|
||||
FTM0_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM0_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 8
|
||||
FTM0_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA;
|
||||
break;
|
||||
|
|
@ -62,7 +62,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
|
|||
FTM1_SC = 0x00; // Set this to zero before changing the modulus
|
||||
FTM1_CNT = 0x0000; // Reset the count to zero
|
||||
FTM1_MOD = 0xFFFF; // max modulus = 65535
|
||||
FTM1_C0V = FTM1_TIMER_RATE / frequency; // Initial FTM Channel 0 compare value 65535
|
||||
FTM1_C0V = (FTM1_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value 65535
|
||||
FTM1_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM1_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 4
|
||||
FTM1_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA;
|
||||
break;
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
|
|||
FTM0_SC = 0x00; // Set this to zero before changing the modulus
|
||||
FTM0_CNT = 0x0000; // Reset the count to zero
|
||||
FTM0_MOD = 0xFFFF; // max modulus = 65535
|
||||
FTM0_C0V = FTM0_TIMER_RATE / frequency; // Initial FTM Channel 0 compare value
|
||||
FTM0_C0V = (FTM0_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value
|
||||
FTM0_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM0_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 8
|
||||
FTM0_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA;
|
||||
break;
|
||||
|
|
@ -63,7 +63,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
|
|||
FTM1_SC = 0x00; // Set this to zero before changing the modulus
|
||||
FTM1_CNT = 0x0000; // Reset the count to zero
|
||||
FTM1_MOD = 0xFFFF; // max modulus = 65535
|
||||
FTM1_C0V = FTM1_TIMER_RATE / frequency; // Initial FTM Channel 0 compare value 65535
|
||||
FTM1_C0V = (FTM1_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value 65535
|
||||
FTM1_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM1_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 4
|
||||
FTM1_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA;
|
||||
break;
|
||||
|
|
|
|||
|
|
@ -1537,7 +1537,7 @@ void Stepper::stepper_pulse_phase_isr() {
|
|||
uint32_t Stepper::stepper_block_phase_isr() {
|
||||
|
||||
// If no queued movements, just wait 1ms for the next move
|
||||
uint32_t interval = (STEPPER_TIMER_RATE / 1000);
|
||||
uint32_t interval = (STEPPER_TIMER_RATE) / 1000;
|
||||
|
||||
// If there is a current block
|
||||
if (current_block) {
|
||||
|
|
|
|||
|
|
@ -2290,7 +2290,7 @@ void Temperature::readings_ready() {
|
|||
HAL_TEMP_TIMER_ISR() {
|
||||
HAL_timer_isr_prologue(TEMP_TIMER_NUM);
|
||||
|
||||
Temperature::isr();
|
||||
Temperature::tick();
|
||||
|
||||
HAL_timer_isr_epilogue(TEMP_TIMER_NUM);
|
||||
}
|
||||
|
|
@ -2320,11 +2320,21 @@ public:
|
|||
#endif
|
||||
};
|
||||
|
||||
void Temperature::isr() {
|
||||
/**
|
||||
* Handle various ~1KHz tasks associated with temperature
|
||||
* - Heater PWM (~1KHz with scaler)
|
||||
* - LCD Button polling (~500Hz)
|
||||
* - Start / Read one ADC sensor
|
||||
* - Advance Babysteps
|
||||
* - Endstop polling
|
||||
* - Planner clean buffer
|
||||
*/
|
||||
void Temperature::tick() {
|
||||
|
||||
static int8_t temp_count = -1;
|
||||
static ADCSensorState adc_sensor_state = StartupDelay;
|
||||
static uint8_t pwm_count = _BV(SOFT_PWM_SCALE);
|
||||
|
||||
// avoid multiple loads of pwm_count
|
||||
uint8_t pwm_count_tmp = pwm_count;
|
||||
|
||||
|
|
|
|||
|
|
@ -217,8 +217,8 @@ typedef struct { int16_t raw_min, raw_max; } raw_range_t;
|
|||
typedef struct { int16_t mintemp, maxtemp; } celsius_range_t;
|
||||
typedef struct { int16_t raw_min, raw_max, mintemp, maxtemp; } temp_range_t;
|
||||
|
||||
#define THERMISTOR_ABS_ZERO_C -273.15f // bbbbrrrrr cold !
|
||||
#define THERMISTOR_RESISTANCE_NOMINAL_C 25.0f // mmmmm comfortable
|
||||
#define THERMISTOR_ABS_ZERO_C -273.15f // bbbbrrrrr cold !
|
||||
#define THERMISTOR_RESISTANCE_NOMINAL_C 25.0f // mmmmm comfortable
|
||||
|
||||
#if HAS_USER_THERMISTORS
|
||||
|
||||
|
|
@ -267,8 +267,6 @@ class Temperature {
|
|||
|
||||
public:
|
||||
|
||||
static volatile bool in_temp_isr;
|
||||
|
||||
#if HOTENDS
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
#define HOTEND_TEMPS (HOTENDS + 1)
|
||||
|
|
@ -513,7 +511,7 @@ class Temperature {
|
|||
* Called from the Temperature ISR
|
||||
*/
|
||||
static void readings_ready();
|
||||
static void isr();
|
||||
static void tick();
|
||||
|
||||
/**
|
||||
* Call periodically to manage heaters
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@
|
|||
],
|
||||
"ldscript": "stm32f407xg.ld",
|
||||
"mcu": "stm32f407vet6",
|
||||
"variant": "BIGTREE_GENERIC_STM32F407_5X"
|
||||
"variant": "BIGTREE_TBD"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F407VE",
|
||||
|
|
@ -24,9 +24,7 @@
|
|||
"svd_path": "STM32F40x.svd"
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"cmsis",
|
||||
"stm32cube"
|
||||
"arduino"
|
||||
],
|
||||
"name": "STM32F407VE (192k RAM. 512k Flash)",
|
||||
"upload": {
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@
|
|||
],
|
||||
"ldscript": "stm32f407xg.ld",
|
||||
"mcu": "stm32f407zgt6",
|
||||
"variant": "BIGTREE_GENERIC_STM32F407_5X"
|
||||
"variant": "BIGTREE_SKR_PRO_1v1"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F407ZG",
|
||||
|
|
@ -24,9 +24,7 @@
|
|||
"svd_path": "STM32F40x.svd"
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"cmsis",
|
||||
"stm32cube"
|
||||
"arduino"
|
||||
],
|
||||
"name": "STM32F407ZG (192k RAM. 1024k Flash)",
|
||||
"upload": {
|
||||
|
|
|
|||
|
|
@ -1,29 +0,0 @@
|
|||
import os,shutil
|
||||
from SCons.Script import DefaultEnvironment
|
||||
from platformio import util
|
||||
|
||||
env = DefaultEnvironment()
|
||||
platform = env.PioPlatform()
|
||||
board = env.BoardConfig()
|
||||
|
||||
FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32")
|
||||
CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS")
|
||||
assert os.path.isdir(FRAMEWORK_DIR)
|
||||
assert os.path.isdir(CMSIS_DIR)
|
||||
assert os.path.isdir("buildroot/share/PlatformIO/variants")
|
||||
|
||||
mcu_type = board.get("build.mcu")[:-2]
|
||||
variant = board.get("build.variant")
|
||||
series = mcu_type[:7].upper() + "xx"
|
||||
variant_dir = os.path.join(FRAMEWORK_DIR, "variants", variant)
|
||||
|
||||
source_dir = os.path.join("buildroot/share/PlatformIO/variants", variant)
|
||||
assert os.path.isdir(source_dir)
|
||||
|
||||
if not os.path.isdir(variant_dir):
|
||||
os.mkdir(variant_dir)
|
||||
|
||||
for file_name in os.listdir(source_dir):
|
||||
full_file_name = os.path.join(source_dir, file_name)
|
||||
if os.path.isfile(full_file_name):
|
||||
shutil.copy(full_file_name, variant_dir)
|
||||
|
|
@ -7,9 +7,7 @@ platform = env.PioPlatform()
|
|||
board = env.BoardConfig()
|
||||
|
||||
FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32")
|
||||
CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS")
|
||||
assert os.path.isdir(FRAMEWORK_DIR)
|
||||
assert os.path.isdir(CMSIS_DIR)
|
||||
assert os.path.isdir("buildroot/share/PlatformIO/variants")
|
||||
|
||||
mcu_type = board.get("build.mcu")[:-2]
|
||||
|
|
|
|||
|
|
@ -41,56 +41,32 @@
|
|||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
//{PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||||
//{PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
//{PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||||
//{PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
//{PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
|
||||
//{PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
//{PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||||
//{PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
//{PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
//{PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
|
||||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
//{PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
//{PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
//{PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
//{PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||||
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
//{PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||||
//{PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
|
||||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
//{PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||||
//{PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
|
||||
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
//{PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
|
||||
//{PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
|
||||
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
//{PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||||
//{PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
|
||||
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
//{PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
|
||||
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
//{PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 E0_DIR
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 BLTOUCH_2
|
||||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 BLTOUCH_4
|
||||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 E1_EN
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 TF_SS
|
||||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 TF_SCLK
|
||||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 TF_MISO
|
||||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 LED
|
||||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 HEATER2
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 HEATER0
|
||||
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 Z_EN
|
||||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 EXP_14
|
||||
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 Z_DIR
|
||||
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 E0_EN
|
||||
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 EXP_8
|
||||
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 EXP_7
|
||||
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio, 24 ADC
|
||||
{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9
|
||||
{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14
|
||||
{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15
|
||||
{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
|
||||
{PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
|
||||
{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6
|
||||
{PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
|
||||
{PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8
|
||||
{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 TH_0
|
||||
{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 TH_1
|
||||
{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 TH_2
|
||||
{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 TH_3
|
||||
{PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 EXP_13
|
||||
{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 EXP_3
|
||||
{PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 EXP_6
|
||||
{PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 EXP_5
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
|
@ -138,79 +114,81 @@ const PinMap PinMap_I2C_SCL[] = {
|
|||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
const PinMap PinMap_PWM[] = {
|
||||
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 HEATER0
|
||||
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 HEATER1
|
||||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 HEATER2
|
||||
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 BED
|
||||
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 FAN0
|
||||
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 FAN1
|
||||
{PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 FAN2
|
||||
{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 EXTENSION1-4
|
||||
|
||||
//probably unused on SKR-Pro. confirmation needed, please.
|
||||
//{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog?
|
||||
//{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog?
|
||||
//{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
//{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
//{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
//{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
//{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
//{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
//{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
//{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
//{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
//{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
//{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
//{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
//{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
//{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
//{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
//{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
//{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
//{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
|
||||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
|
||||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||
//{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
//{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
//{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
//{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
//{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
//{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
//{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
|
||||
//{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
//{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
//{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
|
||||
//{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
//{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
//{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||
//{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
//{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
|
||||
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
{PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
//{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
//{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
//{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
//{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
//{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
//{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
//{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
//{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
//{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
//{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
//{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
//{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
//{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
|
@ -236,9 +214,7 @@ const PinMap PinMap_UART_TX[] = {
|
|||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_RX[] = {
|
||||
{PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
|
|
@ -256,9 +232,7 @@ const PinMap PinMap_UART_RX[] = {
|
|||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
|
|
@ -271,9 +245,7 @@ const PinMap PinMap_UART_RTS[] = {
|
|||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
|
|
@ -292,48 +264,30 @@ const PinMap PinMap_UART_CTS[] = {
|
|||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
|
@ -341,91 +295,40 @@ const PinMap PinMap_SPI_SSEL[] = {
|
|||
//*** CAN ***
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
const PinMap PinMap_CAN_RD[] = {
|
||||
{PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_5, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_12, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PD_0, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
const PinMap PinMap_CAN_TD[] = {
|
||||
{PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_6, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_13, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PD_1, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#error "CAN bus isn't available on this board. Driver should be disabled."
|
||||
#endif
|
||||
|
||||
//*** ETHERNET ***
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
const PinMap PinMap_Ethernet[] = {
|
||||
{PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS
|
||||
{PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK|ETH_RX_CLK
|
||||
{PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO
|
||||
{PA_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL
|
||||
{PA_7, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS_DV|ETH_RX_DV
|
||||
{PB_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2
|
||||
{PB_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3
|
||||
{PB_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
|
||||
{PB_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
|
||||
{PB_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER
|
||||
{PB_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
|
||||
{PB_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
|
||||
{PB_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
|
||||
{PC_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDC
|
||||
{PC_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD2
|
||||
{PC_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_CLK
|
||||
{PC_4, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD0
|
||||
{PC_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD1
|
||||
{PE_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
|
||||
{PG_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
|
||||
{PG_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
|
||||
{PG_14, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#error "Ethernet port isn't available on this board. Driver should be disabled."
|
||||
#endif
|
||||
|
||||
//*** No QUADSPI ***
|
||||
|
||||
//*** USB ***
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
const PinMap PinMap_USB_OTG_FS[] = {
|
||||
//{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||
//{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||
//{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||
//{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF used by LCD
|
||||
//{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS available on wifi port, if empty
|
||||
//{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID available on UART1_RX if not used
|
||||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
const PinMap PinMap_USB_OTG_HS[] = {
|
||||
const PinMap PinMap_USB_OTG_HS[] = { /*
|
||||
#ifdef USE_USB_HS_IN_FS
|
||||
{PA_4, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_SOF
|
||||
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
|
||||
{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS
|
||||
{PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM
|
||||
{PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP
|
||||
#else
|
||||
#error "USB in HS mode isn't supported by the board"
|
||||
{PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0
|
||||
{PA_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_CK
|
||||
{PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1
|
||||
{PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2
|
||||
{PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7
|
||||
{PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3
|
||||
{PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D4
|
||||
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5
|
||||
{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6
|
||||
{PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP
|
||||
|
|
@ -0,0 +1,52 @@
|
|||
#pragma once
|
||||
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
#define HAL_CRC_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it?
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_USART_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
//#define HAL_UART_MODULE_ENABLED // by default
|
||||
//#define HAL_PCD_MODULE_ENABLED // Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
|
||||
|
||||
#undef HAL_SD_MODULE_ENABLED
|
||||
#undef HAL_DAC_MODULE_ENABLED
|
||||
#undef HAL_FLASH_MODULE_ENABLED
|
||||
#undef HAL_CAN_MODULE_ENABLED
|
||||
#undef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#undef HAL_CEC_MODULE_ENABLED
|
||||
#undef HAL_CRYP_MODULE_ENABLED
|
||||
#undef HAL_DCMI_MODULE_ENABLED
|
||||
#undef HAL_DMA2D_MODULE_ENABLED
|
||||
#undef HAL_ETH_MODULE_ENABLED
|
||||
#undef HAL_NAND_MODULE_ENABLED
|
||||
#undef HAL_NOR_MODULE_ENABLED
|
||||
#undef HAL_PCCARD_MODULE_ENABLED
|
||||
#undef HAL_SRAM_MODULE_ENABLED
|
||||
#undef HAL_SDRAM_MODULE_ENABLED
|
||||
#undef HAL_HASH_MODULE_ENABLED
|
||||
#undef HAL_EXTI_MODULE_ENABLED
|
||||
#undef HAL_SMBUS_MODULE_ENABLED
|
||||
#undef HAL_I2S_MODULE_ENABLED
|
||||
#undef HAL_IWDG_MODULE_ENABLED
|
||||
#undef HAL_LTDC_MODULE_ENABLED
|
||||
#undef HAL_DSI_MODULE_ENABLED
|
||||
#undef HAL_QSPI_MODULE_ENABLED
|
||||
#undef HAL_RNG_MODULE_ENABLED
|
||||
#undef HAL_SAI_MODULE_ENABLED
|
||||
#undef HAL_IRDA_MODULE_ENABLED
|
||||
#undef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#undef HAL_WWDG_MODULE_ENABLED
|
||||
#undef HAL_HCD_MODULE_ENABLED
|
||||
#undef HAL_FMPI2C_MODULE_ENABLED
|
||||
#undef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#undef HAL_DFSDM_MODULE_ENABLED
|
||||
#undef HAL_LPTIM_MODULE_ENABLED
|
||||
#undef HAL_MMC_MODULE_ENABLED
|
||||
|
|
@ -192,7 +192,6 @@ SECTIONS
|
|||
. = ALIGN(4);
|
||||
} >RAM
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
|
|
@ -203,5 +202,3 @@ SECTIONS
|
|||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -222,9 +222,15 @@ extern "C" {
|
|||
//#define DACC_RESOLUTION 12
|
||||
|
||||
// PWM resolution
|
||||
#define PWM_RESOLUTION 8
|
||||
#define PWM_FREQUENCY 20000
|
||||
#define PWM_MAX_DUTY_CYCLE 255
|
||||
/*
|
||||
* BEWARE:
|
||||
* Changing this value from the default (1000) will affect the PWM output value of analogWrite (to a PWM pin)
|
||||
* Since the pin is toggled on capture, if you change the frequency of the timer you have to adapt the compare value (analogWrite thinks you did)
|
||||
*/
|
||||
//#define PWM_FREQUENCY 20000
|
||||
//The bottom values are the default and don't need to be redefined
|
||||
//#define PWM_RESOLUTION 8
|
||||
//#define PWM_MAX_DUTY_CYCLE 255
|
||||
|
||||
// Below SPI and I2C definitions already done in the core
|
||||
// Could be redefined here if differs from the default one
|
||||
|
|
@ -241,6 +247,7 @@ extern "C" {
|
|||
// Timer Definitions
|
||||
//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
|
||||
#define TIMER_TONE TIM6
|
||||
#define TIMER_SERIAL TIM7
|
||||
|
||||
// Do not use basic timer: OC is required
|
||||
#define TIMER_SERVO TIM2 //TODO: advanced-control timers don't work
|
||||
|
|
@ -260,9 +267,6 @@ extern "C" {
|
|||
#define PIN_SERIAL_RX PA10
|
||||
#define PIN_SERIAL_TX PA9
|
||||
|
||||
/* Extra HAL modules */
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
|
@ -3,8 +3,10 @@
|
|||
* Copyright (c) 2019, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
|
|
@ -28,8 +30,8 @@
|
|||
*******************************************************************************
|
||||
* Automatically generated from STM32F407Z(E-G)Tx.xml
|
||||
*/
|
||||
#include <Arduino.h>
|
||||
#include <PeripheralPins.h>
|
||||
#include "Arduino.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
/* =====
|
||||
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||
|
|
@ -40,58 +42,58 @@
|
|||
//*** ADC ***
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
const PinMap PinMap_ADC[] = {
|
||||
WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
// {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||||
// {PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||||
//{PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||||
//{PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
// {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||||
// {PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||
// {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
//{PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||||
//{PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||
//{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
|
||||
// {PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||||
// {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
// {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||||
//{PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||||
//{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
//{PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||||
{PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
// {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||||
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
//{PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||||
//{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
{PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
|
||||
#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG)
|
||||
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
// {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||||
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
// {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||||
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
//{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
//{PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||||
//{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
//{PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||||
//{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
#endif
|
||||
{PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
// {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||||
// {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
// {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||||
//{PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||||
//{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
//{PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||||
{PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
|
||||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
// {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||||
// {PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
|
||||
// {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
//{PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||||
//{PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
|
||||
//{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
{PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
|
||||
// {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
|
||||
// {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
// {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||||
//{PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
|
||||
//{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
//{PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||||
{PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
|
||||
// {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
//{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
{PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
|
||||
// {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
//{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
|
||||
#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG)
|
||||
// {PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9
|
||||
// {PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14
|
||||
// {PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15
|
||||
//{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9
|
||||
//{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14
|
||||
//{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15
|
||||
{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
|
||||
{PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
|
||||
{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6
|
||||
// {PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
|
||||
// {PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8
|
||||
//{PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
|
||||
//{PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
|
@ -100,7 +102,7 @@ const PinMap PinMap_ADC[] = {
|
|||
//*** DAC ***
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
const PinMap PinMap_DAC[] = {
|
||||
WEAK const PinMap PinMap_DAC[] = {
|
||||
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
|
||||
{NC, NP, 0}
|
||||
|
|
@ -110,7 +112,7 @@ const PinMap PinMap_DAC[] = {
|
|||
//*** I2C ***
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
const PinMap PinMap_I2C_SDA[] = {
|
||||
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
|
|
@ -123,7 +125,7 @@ const PinMap PinMap_I2C_SDA[] = {
|
|||
#endif
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
const PinMap PinMap_I2C_SCL[] = {
|
||||
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
|
|
@ -138,61 +140,61 @@ const PinMap PinMap_I2C_SCL[] = {
|
|||
//*** PWM ***
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
const PinMap PinMap_PWM[] = {
|
||||
WEAK const PinMap PinMap_PWM[] = {
|
||||
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
//{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
// {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
//{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
//{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
// {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
//{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
//{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
//{PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
// {PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
//{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
//{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
// {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
// {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
//{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
//{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
//{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
// {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
//{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
//{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
// {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
//{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
//{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
//{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
//{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
//{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
//{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
|
||||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
//{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
//{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
|
||||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
//{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||
//{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
|
||||
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
|
|
@ -220,47 +222,47 @@ const PinMap PinMap_PWM[] = {
|
|||
//*** SERIAL ***
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_TX[] = {
|
||||
WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
// {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
//{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG)
|
||||
// {PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_RX[] = {
|
||||
WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
// {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
//{PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG)
|
||||
// {PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_RTS[] = {
|
||||
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
|
|
@ -275,7 +277,7 @@ const PinMap PinMap_UART_RTS[] = {
|
|||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_CTS[] = {
|
||||
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
|
|
@ -292,9 +294,9 @@ const PinMap PinMap_UART_CTS[] = {
|
|||
//*** SPI ***
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_MOSI[] = {
|
||||
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
//{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
|
@ -304,9 +306,9 @@ const PinMap PinMap_SPI_MOSI[] = {
|
|||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_MISO[] = {
|
||||
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
//{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
|
@ -316,9 +318,9 @@ const PinMap PinMap_SPI_MISO[] = {
|
|||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_SCLK[] = {
|
||||
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
//{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
|
@ -328,10 +330,10 @@ const PinMap PinMap_SPI_SCLK[] = {
|
|||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_SSEL[] = {
|
||||
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
//{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
//{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
|
@ -342,7 +344,7 @@ const PinMap PinMap_SPI_SSEL[] = {
|
|||
//*** CAN ***
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
const PinMap PinMap_CAN_RD[] = {
|
||||
WEAK const PinMap PinMap_CAN_RD[] = {
|
||||
{PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_5, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
|
|
@ -353,7 +355,7 @@ const PinMap PinMap_CAN_RD[] = {
|
|||
#endif
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
const PinMap PinMap_CAN_TD[] = {
|
||||
WEAK const PinMap PinMap_CAN_TD[] = {
|
||||
{PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_6, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
|
|
@ -366,7 +368,7 @@ const PinMap PinMap_CAN_TD[] = {
|
|||
//*** ETHERNET ***
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
const PinMap PinMap_Ethernet[] = {
|
||||
WEAK const PinMap PinMap_Ethernet[] = {
|
||||
{PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS
|
||||
{PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK|ETH_RX_CLK
|
||||
{PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO
|
||||
|
|
@ -401,10 +403,10 @@ const PinMap PinMap_Ethernet[] = {
|
|||
//*** USB ***
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
const PinMap PinMap_USB_OTG_FS[] = {
|
||||
// {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||
// {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||
// {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||
WEAK const PinMap PinMap_USB_OTG_FS[] = {
|
||||
//{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||
//{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||
//{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||
{NC, NP, 0}
|
||||
|
|
@ -412,7 +414,7 @@ const PinMap PinMap_USB_OTG_FS[] = {
|
|||
#endif
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
const PinMap PinMap_USB_OTG_HS[] = {
|
||||
WEAK const PinMap PinMap_USB_OTG_HS[] = {
|
||||
#ifdef USE_USB_HS_IN_FS
|
||||
{PA_4, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_SOF
|
||||
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
|
||||
|
|
@ -436,3 +438,21 @@ const PinMap PinMap_USB_OTG_HS[] = {
|
|||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SD ***
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SD[] = {
|
||||
//{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
|
||||
//{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
|
||||
//{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
|
||||
//{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
|
||||
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
|
||||
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
|
||||
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
|
||||
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
|
||||
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
|
||||
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -17,8 +17,8 @@
|
|||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
#ifndef __STM32F4xx_HAL_CONF_CUSTOM
|
||||
#define __STM32F4xx_HAL_CONF_CUSTOM
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
|
|
@ -73,7 +73,9 @@ extern "C" {
|
|||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
#ifndef HAL_PCD_MODULE_ENABLED
|
||||
#define HAL_PCD_MODULE_ENABLED //Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
|
||||
#endif
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
|
@ -82,69 +84,81 @@ extern "C" {
|
|||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#ifndef HSE_VALUE
|
||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#ifndef HSE_STARTUP_TIMEOUT
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#ifndef HSI_VALUE
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#ifndef LSI_VALUE
|
||||
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
in voltage and temperature. */
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#ifndef LSE_VALUE
|
||||
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#ifndef LSE_STARTUP_TIMEOUT
|
||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#ifndef EXTERNAL_CLOCK_VALUE
|
||||
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
||||
#if !defined (VDD_VALUE)
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#endif
|
||||
#if !defined (TICK_INT_PRIORITY)
|
||||
#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */
|
||||
#endif
|
||||
#if !defined (USE_RTOS)
|
||||
#define USE_RTOS 0U
|
||||
#endif
|
||||
#if !defined (PREFETCH_ENABLE)
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#endif
|
||||
#if !defined (INSTRUCTION_CACHE_ENABLE)
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#endif
|
||||
#if !defined (DATA_CACHE_ENABLE)
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
#endif
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
|
|
@ -186,7 +200,7 @@ in voltage and temperature.*/
|
|||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
|
|
@ -215,32 +229,32 @@ in voltage and temperature.*/
|
|||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
|
||||
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
|
@ -251,14 +265,15 @@ in voltage and temperature.*/
|
|||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
#ifndef USE_SPI_CRC
|
||||
#define USE_SPI_CRC 0U
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
|
|
@ -456,9 +471,9 @@ in voltage and temperature.*/
|
|||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
|
|
@ -475,7 +490,7 @@ void assert_failed(uint8_t *file, uint32_t line);
|
|||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,10 +1,11 @@
|
|||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
** File : LinkerScript.ld
|
||||
|
||||
** File : lscript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F407VETx Device with
|
||||
** 512KByte FLASH, 128KByte RAM
|
||||
** Abstract : Linker script for STM32F407(VZ)(EG)Tx Device with
|
||||
** 512/1024KByte FLASH, 128KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
|
|
@ -17,13 +18,32 @@
|
|||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
** (c)Copyright Ac6.
|
||||
** You may use this file as-is or modify it according to the needs of your
|
||||
** project. Distribution of this file (unmodified or modified) is not
|
||||
** permitted. Ac6 permit registered System Workbench for MCU users the
|
||||
** rights to distribute the assembled, compiled & linked contents of this
|
||||
** file as part of an application binary file, provided that it is built
|
||||
** using the System Workbench for MCU toolchain.
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||
**
|
||||
** Redistribution and use in source and binary forms, with or without modification,
|
||||
** are permitted provided that the following conditions are met:
|
||||
** 1. Redistributions of source code must retain the above copyright notice,
|
||||
** this list of conditions and the following disclaimer.
|
||||
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
** this list of conditions and the following disclaimer in the documentation
|
||||
** and/or other materials provided with the distribution.
|
||||
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||
** may be used to endorse or promote products derived from this software
|
||||
** without specific prior written permission.
|
||||
**
|
||||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
|
@ -32,7 +52,7 @@
|
|||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20020000; /* end of RAM */
|
||||
_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
|
@ -40,9 +60,9 @@ _Min_Stack_Size = 0x400; /* required amount of stack */
|
|||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
|
||||
CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K
|
||||
FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
|
|
@ -57,7 +77,7 @@ SECTIONS
|
|||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text ALIGN(8):
|
||||
.text ALIGN(4):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
|
|
@ -164,12 +184,12 @@ SECTIONS
|
|||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
. = ALIGN(4);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
. = ALIGN(4);
|
||||
} >RAM
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
|
|
|
|||
|
|
@ -28,12 +28,13 @@
|
|||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "pins_arduino.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(ARDUINO_BLACK_F407VE) || defined(ARDUINO_BLACK_F407VG)
|
||||
// Pin number
|
||||
// This array allows to wrap Arduino pin number(Dx or x)
|
||||
// to STM32 PinName (PX_n)
|
||||
|
|
@ -93,23 +94,98 @@ const PinName digitalPin[] = {
|
|||
PB_13, PB_14,
|
||||
PB_4,
|
||||
};
|
||||
#endif // ARDUINO_BLACK_F407VE || ARDUINO_BLACK_F407VG
|
||||
|
||||
#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG)
|
||||
const PinName digitalPin[] = {
|
||||
// Left Side
|
||||
//Ext //Int
|
||||
//GND //5V
|
||||
//GND //3V3
|
||||
PB_12, PB_13,
|
||||
PB_14, PB_15,
|
||||
PD_8, PD_9,
|
||||
PD_10, PD_11,
|
||||
PD_12, PD_13,
|
||||
PD_14, PD_15,
|
||||
PG_2, PG_3,
|
||||
PG_4, PG_5,
|
||||
PG_6, PG_7,
|
||||
PG_8, PC_6,
|
||||
PC_7, PC_8,
|
||||
PC_9, PA_8,
|
||||
PA_9, PA_10,
|
||||
PA_11, PA_12, // PA_11: USB_DM, PA_12: USB_DP
|
||||
PA_13, PA_14,
|
||||
PA_15, PC_10,
|
||||
PC_11, PC_12,
|
||||
PD_0, PD_1,
|
||||
PD_2, PD_3,
|
||||
PD_4, PD_5,
|
||||
PD_6, PD_7,
|
||||
PG_9, PG_10,
|
||||
PG_11, PG_12,
|
||||
PG_13, PG_14,
|
||||
PG_15, PB_3,
|
||||
PB_4, PB_5,
|
||||
PB_6, PB_7,
|
||||
PB_8, PB_9,
|
||||
|
||||
// Right Side
|
||||
//Int //Ext
|
||||
//3V3 //3V3
|
||||
//BOOT1 //BOOT0
|
||||
//GND //GND
|
||||
//VREF+ //GND
|
||||
PB_10, PB_11,
|
||||
PE_14, PE_15,
|
||||
PE_12, PE_13,
|
||||
PE_10, PE_11,
|
||||
PE_8, PE_9,
|
||||
PG_1, PE_7,
|
||||
PF_15, PG_0,
|
||||
PF_13, PF_14,
|
||||
PF_11, PF_12,
|
||||
PB_2, // PB1 PB2 Inverted to allow contiguous analog pins
|
||||
PB_1,
|
||||
PC_5, PB_0,
|
||||
PA_7, PC_4,
|
||||
PA_5, PA_6,
|
||||
PA_3, PA_4,
|
||||
PA_1, PA_2,
|
||||
PC_3, PA_0, // PA_0(WK_UP): BUT K_UP)
|
||||
PC_1, PC_2,
|
||||
/*PF_10,*/PC_0, // PF_10: Moved to allow contiguous analog pins
|
||||
PF_8, /*PF_9,*/ // PF_9: Moved to allow contiguous analog pins
|
||||
PF_6, PF_7,
|
||||
PF_10, PF_9, // PF_10: LED D2, PF_9: LED D1 (active low)
|
||||
PF_4, PF_5,
|
||||
PF_2, PF_3,
|
||||
PF_0, PF_1,
|
||||
PE_6, PC_13,
|
||||
PE_4, PE_5, // PE_4: BUT K0, PE_5: BUT K1
|
||||
PE_2, PE_3,
|
||||
PE_0, PE_1,
|
||||
};
|
||||
#endif // ARDUINO_BLACK_F407ZE || ARDUINO_BLACK_F407ZG
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
// ------------------------
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
WEAK void SystemClock_Config() {
|
||||
WEAK void SystemClock_Config(void)
|
||||
{
|
||||
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
|
|
|||
|
|
@ -27,12 +27,12 @@
|
|||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef _VARIANT_ARDUINO_STM32_
|
||||
#define _VARIANT_ARDUINO_STM32_
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
#include <PeripheralPins.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
|
|
@ -41,7 +41,7 @@ extern "C" {
|
|||
/*----------------------------------------------------------------------------
|
||||
* Pins
|
||||
*----------------------------------------------------------------------------*/
|
||||
extern const PinName digitalPin[];
|
||||
#if defined(ARDUINO_BLACK_F407VE) || defined(ARDUINO_BLACK_F407VG)
|
||||
// Right Side
|
||||
#define PE1 0
|
||||
#define PE0 1
|
||||
|
|
@ -133,9 +133,9 @@ extern const PinName digitalPin[];
|
|||
//#define DACC_RESOLUTION 12
|
||||
|
||||
// PWM resolution
|
||||
#define PWM_RESOLUTION 8
|
||||
#define PWM_FREQUENCY 20000
|
||||
#define PWM_MAX_DUTY_CYCLE 255
|
||||
//#define PWM_RESOLUTION 8
|
||||
//#define PWM_FREQUENCY 20000
|
||||
//#define PWM_MAX_DUTY_CYCLE 255
|
||||
|
||||
// On-board LED pin number
|
||||
#define LED_D2 PA6
|
||||
|
|
@ -144,6 +144,138 @@ extern const PinName digitalPin[];
|
|||
// Board specific button
|
||||
#define BTN_K_UP PA0
|
||||
|
||||
#endif // ARDUINO_BLACK_F407VE || ARDUINO_BLACK_F407VG
|
||||
|
||||
#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG)
|
||||
// Left Side
|
||||
#define PB12 0
|
||||
#define PB13 1
|
||||
#define PB14 2
|
||||
#define PB15 3
|
||||
#define PD8 4
|
||||
#define PD9 5
|
||||
#define PD10 6
|
||||
#define PD11 7
|
||||
#define PD12 8
|
||||
#define PD13 9
|
||||
#define PD14 10
|
||||
#define PD15 11
|
||||
#define PG2 12
|
||||
#define PG3 13
|
||||
#define PG4 14
|
||||
#define PG5 15
|
||||
#define PG6 16
|
||||
#define PG7 17
|
||||
#define PG8 18
|
||||
#define PC6 19
|
||||
#define PC7 20
|
||||
#define PC8 21
|
||||
#define PC9 22
|
||||
#define PA8 23
|
||||
#define PA9 24
|
||||
#define PA10 25
|
||||
#define PA11 26 // USB_DM
|
||||
#define PA12 27 // USB_DP
|
||||
#define PA13 28
|
||||
#define PA14 29
|
||||
#define PA15 30
|
||||
#define PC10 31
|
||||
#define PC11 32
|
||||
#define PC12 33
|
||||
#define PD0 34
|
||||
#define PD1 35
|
||||
#define PD2 36
|
||||
#define PD3 37
|
||||
#define PD4 38
|
||||
#define PD5 39
|
||||
#define PD6 40
|
||||
#define PD7 41
|
||||
#define PG9 42
|
||||
#define PG10 43
|
||||
#define PG11 44
|
||||
#define PG12 45
|
||||
#define PG13 46
|
||||
#define PG14 47
|
||||
#define PG15 48
|
||||
#define PB3 49
|
||||
#define PB4 50
|
||||
#define PB5 51
|
||||
#define PB6 52
|
||||
#define PB7 53
|
||||
#define PB8 54
|
||||
#define PB9 55
|
||||
|
||||
// Right Side
|
||||
#define PB10 56
|
||||
#define PB11 57
|
||||
#define PE14 58
|
||||
#define PE15 59
|
||||
#define PE12 60
|
||||
#define PE13 61
|
||||
#define PE10 62
|
||||
#define PE11 63
|
||||
#define PE8 64
|
||||
#define PE9 65
|
||||
#define PG1 66
|
||||
#define PE7 67
|
||||
#define PF15 68
|
||||
#define PG0 69
|
||||
#define PF13 70
|
||||
#define PF14 71
|
||||
#define PF11 72
|
||||
#define PF12 73
|
||||
#define PB2 74
|
||||
#define PB1 75 // A0
|
||||
#define PC5 76 // A1
|
||||
#define PB0 77 // A2
|
||||
#define PA7 78 // A3
|
||||
#define PC4 79 // A4
|
||||
#define PA5 80 // A5
|
||||
#define PA6 81 // A6
|
||||
#define PA3 82 // A7
|
||||
#define PA4 83 // A8
|
||||
#define PA1 84 // A9
|
||||
#define PA2 85 // A10
|
||||
#define PC3 86 // A11
|
||||
#define PA0 87 // A12/PA_0(WK_UP): BUT K_UP)
|
||||
#define PC1 88 // A13
|
||||
#define PC2 89 // A14
|
||||
#define PC0 90 // A15
|
||||
#define PF8 91 // A16
|
||||
#define PF6 92 // A17
|
||||
#define PF7 93 // A18
|
||||
#define PF9 94 // LED D1 (active low)
|
||||
#define PF10 95 // LED D2 (active low)
|
||||
#define PF4 96
|
||||
#define PF5 97
|
||||
#define PF2 98
|
||||
#define PF3 99
|
||||
#define PF0 100
|
||||
#define PF1 101
|
||||
#define PE6 102
|
||||
#define PC13 103
|
||||
#define PE4 104 // BUT K0
|
||||
#define PE5 105 // BUT K1
|
||||
#define PE2 106
|
||||
#define PE3 107
|
||||
#define PE0 108
|
||||
#define PE1 109
|
||||
|
||||
// This must be a literal
|
||||
#define NUM_DIGITAL_PINS 110
|
||||
// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS
|
||||
#define NUM_ANALOG_INPUTS 19
|
||||
#define NUM_ANALOG_FIRST 75
|
||||
|
||||
// On-board LED pin number
|
||||
#define LED_D2 PF10
|
||||
#define LED_D1 PF9
|
||||
|
||||
// Board specific button
|
||||
#define BTN_WK_UP PA0
|
||||
|
||||
#endif // ARDUINO_BLACK_F407ZE || ARDUINO_BLACK_F407ZG
|
||||
|
||||
#define LED_BUILTIN LED_D2
|
||||
#define LED_GREEN LED_D2
|
||||
|
||||
|
|
@ -187,6 +319,10 @@ extern const PinName digitalPin[];
|
|||
#define PIN_SERIAL_RX PA10
|
||||
#define PIN_SERIAL_TX PA9
|
||||
|
||||
/* Extra HAL modules */
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
|
@ -213,3 +349,5 @@ extern const PinName digitalPin[];
|
|||
#define SERIAL_PORT_MONITOR Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#endif
|
||||
|
||||
#endif /* _VARIANT_ARDUINO_STM32_ */
|
||||
|
|
|
|||
|
|
@ -352,12 +352,15 @@ monitor_speed = 250000
|
|||
# ARMED (STM32)
|
||||
#
|
||||
[env:ARMED]
|
||||
platform = ststm32@5.6.0
|
||||
platform = ststm32@>=5.7.0
|
||||
framework = arduino
|
||||
board = armed_v1
|
||||
build_flags = ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
|
||||
build_flags =
|
||||
${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DUSBD_USE_CDC
|
||||
-O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
|
||||
-IMarlin/src/HAL/HAL_STM32
|
||||
lib_deps = ${common.lib_deps}
|
||||
lib_ignore = Adafruit NeoPixel
|
||||
lib_ignore = Adafruit NeoPixel, SoftwareSerial
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
|
||||
monitor_speed = 250000
|
||||
|
||||
|
|
@ -460,38 +463,44 @@ monitor_speed = 250000
|
|||
# Shield - https://github.com/jmz52/Hardware
|
||||
#
|
||||
[env:STM32F407VE_black]
|
||||
platform = ststm32@5.4.3
|
||||
framework = arduino
|
||||
board = blackSTM32F407VET6
|
||||
extra_scripts = pre:buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py
|
||||
build_flags = ${common.build_flags}
|
||||
-DSTM32F4 -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\"
|
||||
lib_deps = ${common.lib_deps}
|
||||
lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
|
||||
monitor_speed = 250000
|
||||
platform = ststm32@>=5.7.0
|
||||
framework = arduino
|
||||
platform_packages = framework-arduinoststm32@>=3.10700.191028
|
||||
board = blackSTM32F407VET6
|
||||
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
build_flags = ${common.build_flags}
|
||||
-DTARGET_STM32F4 -DARDUINO_BLACK_F407VE
|
||||
-DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\"
|
||||
-IMarlin/src/HAL/HAL_STM32
|
||||
lib_deps = ${common.lib_deps}
|
||||
lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, SoftwareSerial
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
|
||||
monitor_speed = 250000
|
||||
|
||||
#
|
||||
# Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
|
||||
#
|
||||
[env:BIGTREE_SKR_PRO]
|
||||
platform = ststm32@5.6.0
|
||||
framework = arduino
|
||||
board = BigTree_SKR_Pro
|
||||
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
build_flags = ${common.build_flags}
|
||||
platform = ststm32@>=5.7.0
|
||||
framework = arduino
|
||||
platform_packages = framework-arduinoststm32@>=3.10700.191028
|
||||
board = BigTree_SKR_Pro
|
||||
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
build_flags = ${common.build_flags}
|
||||
-DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\"
|
||||
-DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -DHAVE_HWSERIAL6 -DSS_TIMER=4
|
||||
lib_deps =
|
||||
-DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
|
||||
-DHAVE_HWSERIAL6
|
||||
-IMarlin/src/HAL/HAL_STM32
|
||||
lib_deps =
|
||||
U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
|
||||
LiquidCrystal@1.3.4
|
||||
LiquidCrystal
|
||||
TMCStepper@>=0.5.2,<1.0.0
|
||||
Adafruit NeoPixel
|
||||
LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
|
||||
Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
|
||||
SoftwareSerialM=https://github.com/sjasonsmith/SoftwareSerialM/archive/SKR_PRO.zip
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
|
||||
monitor_speed = 250000
|
||||
lib_ignore = SoftwareSerial, SoftwareSerialM
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
|
||||
monitor_speed = 250000
|
||||
|
||||
#
|
||||
# BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4)
|
||||
|
|
@ -531,7 +540,7 @@ monitor_speed = 250000
|
|||
# Malyan M200 (STM32F103CB)
|
||||
#
|
||||
[env:STM32F103CB_malyan]
|
||||
platform = ststm32@5.6.0
|
||||
platform = ststm32@>=5.7.0
|
||||
framework = arduino
|
||||
board = malyanM200
|
||||
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
|
||||
|
|
|
|||
Loading…
Reference in a new issue