BigTreeTech SKR Mini v1.1 (#14041)
This commit is contained in:
yangwenxiong
Scott Lahteine
parent
f30b89953d
commit
b0a4ea79b8
|
|
@ -245,6 +245,7 @@
|
|||
#define BOARD_GTM32_PRO_VB 1805 // STM32f103VET6 controller
|
||||
#define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller
|
||||
#define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6
|
||||
#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // STM32F103RC
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M4F
|
||||
|
|
|
|||
|
|
@ -414,6 +414,8 @@
|
|||
#include "pins_STM32F1R.h" // STM32F1 env:STM32F1
|
||||
#elif MB(STM3R_MINI)
|
||||
#include "pins_STM3R_MINI.h" // STM32F1 env:STM32F1
|
||||
#elif MB(BIGTREE_SKR_MINI_V1_1)
|
||||
#include "pins_BIGTREE_SKR_MINI_V1_1.h" // STM32F1 env:BIGTREE_SKR_MINI
|
||||
#elif MB(MALYAN_M200)
|
||||
#include "pins_MALYAN_M200.h" // STM32F1 env:malyanm200
|
||||
#elif MB(CHITU3D)
|
||||
|
|
|
|||
134
Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h
Normal file
134
Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h
Normal file
|
|
@ -0,0 +1,134 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef TARGET_STM32F1
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "BIGTREE SKR mini V1.1"
|
||||
#endif
|
||||
|
||||
// Ignore temp readings during develpment.
|
||||
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PC2
|
||||
#define X_MAX_PIN PA2
|
||||
#define Y_MIN_PIN PC1
|
||||
#define Y_MAX_PIN PA1
|
||||
#define Z_MIN_PIN PC0
|
||||
#define Z_MAX_PIN PC3
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
|
||||
/**
|
||||
* TODO: Currently using same Enable pin for all steppers.
|
||||
*/
|
||||
|
||||
#define X_STEP_PIN PC6
|
||||
#define X_DIR_PIN PC7
|
||||
#define X_ENABLE_PIN PB15
|
||||
|
||||
#define Y_STEP_PIN PB13
|
||||
#define Y_DIR_PIN PB14
|
||||
#define Y_ENABLE_PIN PB12
|
||||
|
||||
#define Z_STEP_PIN PB10
|
||||
#define Z_DIR_PIN PB11
|
||||
#define Z_ENABLE_PIN PB2
|
||||
|
||||
#define E0_STEP_PIN PC5
|
||||
#define E0_DIR_PIN PB0
|
||||
#define E0_ENABLE_PIN PC4
|
||||
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#define TMC_SW_SCK PB3
|
||||
#define TMC_SW_MISO PB4
|
||||
#define TMC_SW_MOSI PB5
|
||||
#endif
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA8
|
||||
#define FAN_PIN PC8
|
||||
#define HEATER_BED_PIN PC9
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_BED_PIN PB1 // Analog Input
|
||||
#define TEMP_0_PIN PA0 // Analog Input
|
||||
|
||||
//
|
||||
// LCD Pins
|
||||
//
|
||||
|
||||
/**
|
||||
* _____ _____
|
||||
* NC | · · | GND 5V | · · | GND
|
||||
* RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
|
||||
* (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
|
||||
* (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
|
||||
* (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
|
||||
* ￣￣ ￣￣
|
||||
* EXP2 EXP1
|
||||
*/
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#define BEEPER_PIN PC10
|
||||
#define BTN_ENC PC11
|
||||
#define LCD_PINS_RS PC12
|
||||
|
||||
#define BTN_EN1 PD2
|
||||
#define BTN_EN2 PB8
|
||||
|
||||
#define LCD_PINS_ENABLE PB6
|
||||
#define LCD_PINS_D4 PC13
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
#define LCD_PINS_D5 PB7
|
||||
#define LCD_PINS_D6 PC15
|
||||
#define LCD_PINS_D7 PC14
|
||||
#endif
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
|
||||
// Marlin uses the SD drive attached to the LCD
|
||||
//#define STM32_SD_LCD
|
||||
|
||||
#ifdef STM32_SD_LCD
|
||||
#define SD_DETECT_PIN PB9
|
||||
#define ENABLE_SPI3
|
||||
#else
|
||||
#define SD_DETECT_PIN PA3
|
||||
#endif
|
||||
14
buildroot/share/PlatformIO/ldscripts/STM32F1_SKR_MINI.ld
Normal file
14
buildroot/share/PlatformIO/ldscripts/STM32F1_SKR_MINI.ld
Normal file
|
|
@ -0,0 +1,14 @@
|
|||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
|
||||
rom (rx) : ORIGIN = 0x08007000, LENGTH = 256K - 28K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
8
buildroot/share/PlatformIO/scripts/STM32F1_SKR_MINI.py
Normal file
8
buildroot/share/PlatformIO/scripts/STM32F1_SKR_MINI.py
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
Import("env")
|
||||
|
||||
# Relocate firmware from 0x08000000 to 0x08007000
|
||||
for define in env['CPPDEFINES']:
|
||||
if define[0] == "VECT_TAB_ADDR":
|
||||
env['CPPDEFINES'].remove(define)
|
||||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000"))
|
||||
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/STM32F1_SKR_MINI.ld")
|
||||
|
|
@ -272,6 +272,32 @@ lib_ldf_mode = 1
|
|||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
|
||||
monitor_speed = 250000
|
||||
|
||||
#
|
||||
# BIGTREE_SKR_MINI
|
||||
#
|
||||
[env:BIGTREE_SKR_MINI]
|
||||
platform = ststm32
|
||||
framework = arduino
|
||||
board = genericSTM32F103RC
|
||||
extra_scripts = buildroot/share/PlatformIO/scripts/STM32F1_SKR_MINI.py
|
||||
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
|
||||
${common.build_flags}
|
||||
-g
|
||||
lib_deps = ${common.lib_deps}
|
||||
lib_ignore = U8glib-HAL
|
||||
c1921b4
|
||||
libf3c
|
||||
lib066
|
||||
Adafruit NeoPixel_ID28
|
||||
Adafruit NeoPixel
|
||||
libf3e
|
||||
TMC26XStepper
|
||||
lib_ldf_mode = 1
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
|
||||
monitor_speed = 115200
|
||||
upload_protocol = stlink
|
||||
debug_tool = stlink
|
||||
|
||||
#
|
||||
# STM32F4
|
||||
#
|
||||
|
|
|
|||
Loading…
Reference in a new issue